Headed guide bush with ball cage retainer 2081.67. d5 d 3 H5 js4 *d 2 Cage advance 6 4 l l3 d4 l1 6 6 8,5 2,5 l2 d1 d8 Material: X Bush: Tool steel Hardness: 62 ± 2 HRC Cage: Brass Balls: Steel hardened (DIN 5401) Note: Ball cage position - please specify the required cage advance with order. FIBRO Ball Cage Retainers ensure optimum starting position of ball cages on inverted die sets - even if pillars retract from guide bushes. The application determines the cage advance. Note that cage travel is half the stroke length. In this context it is of importance to note the minimum constructional length. The cage advance should be chosen so that during normal operation of the tool, optimum position is achieved. *Preloading see pairing classification at the beginning of chapter D Matching guide combinations, see selection matrix at the beginning of chapter D. Price and delivery on request! „X” d 6 a1 d7 Tolerance range: yellow = .10 green = .20 red = .30 a 13 2081.67. Headed guide bush with ball cage retainer d1 d2 d3 d4 d5 d6 d7 d8 l1 l2 l3 l a a1 19 20 25 26 32 32 40 52 64.7 38.9 59 23 36 72 20.7 30 24 25 30 31 40 40 48 60 72.7 46 79 23 56 96 22.65 33.4 30 32 38 40 48 48 56 67 79.7 53 93 30 63 120 24.4 36.4 38 40 46 48 58 58 66 77 89.7 63 108 37 71 140 35.3 35.3 48 50 56 58 70 70 80 91 103.7 77 127 47 80 140 40.2 40.2 60 63 68 71 85 85 95 106 118.7 92 150 60 90 160 45.5 45.5 Ordering Code (example): Headed guide bush with ball cage retainer Guide diameter d1 Cage advance VL Classification TOL Order No D108 =2081.67. 38 mm= 038. 5 mm = 005. yellow = 10 =2081.67.038.005.10 subject to alterations