Precision, Ultralow Noise, RRIO,
Zero-Drift Op Amp
ADA4528-2-EP
Enhanced Product
FEATURES
PIN CONNECTION DIAGRAM
Supports defense and aerospace applications (AQEC standard)
Extended industrial temperature range: −55°C to +125°C
Controlled manufacturing baseline
1 assembly/test site
1 fabrication site
Product change notification
Qualification data available upon request
TOP VIEW
(Not to Scale)
OUT A 1
6 –IN B
V– 4
5 +IN B
14897-107
7 OUT B
+IN A 3
NOTES
1. CONNECT THE EXPOSED PAD TO
V– OR LEAVE IT UNCONNECTED.
Figure 1.
100
VSY = 5V
AV = 1
VCM = VSY/2
10
1
1
APPLICATIONS
8 V+
–IN A 2
10
100
1k
10k
100k
1M
FREQUENCY (Hz)
Thermocouples/thermopiles
Load cell and bridge transducers
Precision instrumentation
Electronic scales
Medical instrumentation
Handheld test equipment
10M
14897-063
ENHANCED PRODUCT FEATURES
ADA4528-2-EP
VOLTAGE NOISE DENSITY (nV/√Hz)
Low offset voltage: 2.5 µV maximum
Low offset voltage drift: 0.015 μV/°C maximum
Low noise
5.6 nV/√Hz at f = 1 kHz, AV = +100
97 nV p-p at f = 0.1 Hz to 10 Hz, AV = +100
Open-loop gain: 130 dB minimum
CMRR: 135 dB minimum
PSRR: 130 dB minimum
Unity-gain crossover: 4 MHz
Gain bandwidth product: 3 MHz at AV = +100
−3 dB closed-loop bandwidth: 6.2 MHz
Single-supply operation: 2.2 V to 5.5 V
Dual-supply operation: ±1.1 V to ±2.75 V
Rail-to-rail input and output (RRIO)
Unity-gain stable
Figure 2. Voltage Noise Density vs. Frequency
GENERAL DESCRIPTION
The ADA4528-2-EP is an ultralow noise, zero-drift operational
amplifier featuring rail-to-rail input and output swing. With an
offset voltage of 2.5 μV, offset voltage drift of 0.015 μV/°C, and
typical noise of 97 nV p-p (0.1 Hz to 10 Hz, AV = +100), the
ADA4528-2-EP is well suited for applications in which error
sources cannot be tolerated.
which make it ideal for applications that require precision
amplification of low level signals, such as position and pressure
sensors, strain gages, and medical instrumentation.
The ADA4528-2-EP has a wide operating supply range of 2.2 V to
5.5 V, high gain, and excellent CMRR and PSRR specifications,
Additional application and technical information can be found
in the ADA4528-2 datasheet.
Rev. 0
The ADA4528-2-EP is specified over the extended industrial
temperature range (−55°C to +125°C) and is available in an 8-lead
LFCSP package.
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
©2016 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
ADA4528-2-EP
Enhanced Product
TABLE OF CONTENTS
Features .............................................................................................. 1
Electrical Characteristics—5 V Operation ................................5
Enhanced Product Features ............................................................ 1
Absolute Maximum Ratings ............................................................6
Applications ....................................................................................... 1
Thermal Resistance .......................................................................6
Pin Connection Diagram ................................................................ 1
ESD Caution...................................................................................6
General Description ......................................................................... 1
Pin Configuration and Function Descriptions..............................7
Revision History ............................................................................... 2
Typical Performance Characteristics ..............................................8
Specifications..................................................................................... 3
Outline Dimensions ....................................................................... 17
Electrical Characteristics—2.5 V Operation ............................ 3
Ordering Guide .......................................................................... 17
REVISION HISTORY
8/2016—Revision 0: Initial Version
Rev. 0 | Page 2 of 17
Enhanced Product
ADA4528-2-EP
SPECIFICATIONS
ELECTRICAL CHARACTERISTICS—2.5 V OPERATION
VSY = 2.5 V, VCM = VSY/2, TA = 25°C, unless otherwise specified.
Table 1.
Parameter
INPUT CHARACTERISTICS
Offset Voltage
Symbol
Test Conditions/Comments
VOS
Offset Voltage Drift
Input Bias Current
ΔVOS/ΔT
IB
VCM = 0 V to 2.5 V
−55°C ≤ TA ≤ +125°C
−55°C ≤ TA ≤ +125°C
Input Offset Current
IOS
Min
Typ
Max
Unit
0.3
2.5
4.3
0.018
400
600
800
1
2.5
μV
μV
μV/°C
pA
pA
pA
nA
V
dB
dB
dB
dB
dB
dB
0.002
220
−55°C ≤ TA ≤ +125°C
440
−55°C ≤ TA ≤ +125°C
Input Voltage Range
Common-Mode Rejection Ratio
CMRR
Open-Loop Gain
AVO
Input Resistance
Differential Mode
Common Mode
Input Capacitance
Differential Mode
Common Mode
OUTPUT CHARACTERISTICS
Output Voltage High
Output Voltage Low
Short-Circuit Current
Closed-Loop Output Impedance
POWER SUPPLY
Power Supply Rejection Ratio
Supply Current per Amplifier
DYNAMIC PERFORMANCE
Slew Rate
Settling Time to 0.1%
Unity-Gain Crossover
Phase Margin
Gain Bandwidth Product
−3 dB Closed-Loop Bandwidth
Overload Recovery Time
VCM = 0 V to 2.5 V
−55°C ≤ TA ≤ +125°C
RL = 10 kΩ, VO = 0.1 V to 2.4 V
−55°C ≤ TA ≤ +125°C
RL = 2 kΩ, VO = 0.1 V to 2.4 V
−55°C ≤ TA ≤ +125°C
0
135
116
130
126
122
119
158
140
132
RINDM
RINCM
225
1
kΩ
GΩ
CINDM
CINCM
15
30
pF
pF
2.495
V
V
V
V
mV
mV
mV
mV
mA
Ω
VOH
VOL
ISC
ZOUT
PSRR
ISY
SR
tS
UGC
ΦM
GBP
f−3dB
RL = 10 kΩ to VCM
−55°C ≤ TA ≤ +125°C
RL = 2 kΩ to VCM
−55°C ≤ TA ≤ +125°C
RL = 10 kΩ to VCM
−55°C ≤ TA ≤ +125°C
RL = 2 kΩ to VCM
−55°C ≤ TA ≤ +125°C
2.49
2.485
2.46
2.44
5
20
RL = 10 kΩ, CL = 100 pF, AV = +1
VIN = 1.5 V step, RL = 10 kΩ, CL = 100 pF, AV = −1
VIN = 10 mV p-p, RL = 10 kΩ, CL = 100 pF, AV = +1
VIN = 10 mV p-p, RL = 10 kΩ, CL = 100 pF, AV = +1
VIN = 10 mV p-p, RL = 10 kΩ, CL = 100 pF, AV = +100
VIN = 10 mV p-p, RL = 10 kΩ, CL = 100 pF, AV = +1
RL = 10 kΩ, CL = 100 pF, AV = −10
Rev. 0 | Page 3 of 17
10
15
40
60
±30
0.1
f = 1 kHz, AV = +10
VSY = 2.2 V to 5.5 V
−55°C ≤ TA ≤ +125°C
IO = 0 mA
−55°C ≤ TA ≤ +125°C
2.48
130
127
150
1.4
0.45
7
4
57
3
6.2
50
1.7
2.1
dB
dB
mA
mA
V/μs
µs
MHz
Degrees
MHz
MHz
μs
ADA4528-2-EP
Parameter
NOISE PERFORMANCE
Voltage Noise
Voltage Noise Density
Current Noise
Current Noise Density
Enhanced Product
Symbol
Test Conditions/Comments
en p-p
en
f = 0.1 Hz to 10 Hz, AV = +100
f = 1 kHz, AV = +100
f = 1 kHz, AV = +100, VCM = 2.0 V
f = 0.1 Hz to 10 Hz, AV = +100
f = 1 kHz, AV = +100
in p-p
in
Rev. 0 | Page 4 of 17
Min
Typ
97
5.6
5.5
10
0.7
Max
Unit
nV p-p
nV/√Hz
nV/√Hz
pA p-p
pA/√Hz
Enhanced Product
ADA4528-2-EP
ELECTRICAL CHARACTERISTICS—5 V OPERATION
VSY = 5 V, VCM = VSY/2, TA = 25°C, unless otherwise specified.
Table 2.
Parameter
INPUT CHARACTERISTICS
Offset Voltage
Symbol
Test Conditions/Comments
VOS
Offset Voltage Drift
Input Bias Current
ΔVOS/ΔT
IB
VCM = 0 V to 5 V
−55°C ≤ TA ≤ +125°C
−55°C ≤ TA ≤ +125°C
Input Offset Current
IOS
Min
Typ
Max
Unit
0.3
2.5
4
0.015
250
400
500
650
5
μV
μV
μV/°C
pA
pA
pA
pA
V
dB
dB
dB
dB
dB
dB
0.002
125
−55°C ≤ TA ≤ +125°C
250
−55°C ≤ TA ≤ +125°C
Input Voltage Range
Common-Mode Rejection Ratio
CMRR
Open-Loop Gain
AVO
Input Resistance
Differential Mode
Common Mode
Input Capacitance
Differential Mode
Common Mode
OUTPUT CHARACTERISTICS
Output Voltage High
Output Voltage Low
Short-Circuit Current
Closed-Loop Output Impedance
POWER SUPPLY
Power Supply Rejection Ratio
Supply Current per Amplifier
DYNAMIC PERFORMANCE
Slew Rate
Settling Time to 0.1%
Unity-Gain Crossover
Phase Margin
Gain Bandwidth Product
−3 dB Closed-Loop Bandwidth
Overload Recovery Time
NOISE PERFORMANCE
Voltage Noise
Voltage Noise Density
Current Noise
Current Noise Density
VCM = 0 V to 5 V
−55°C ≤ TA ≤ +125°C
RL = 10 kΩ, VO = 0.1 V to 4.9 V
−55°C ≤ TA ≤ +125°C
RL = 2 kΩ, VO = 0.1 V to 4.9 V
−55°C ≤ TA ≤ +125°C
0
137
122
127
125
121
120
160
139
131
RINDM
RINCM
190
1
kΩ
GΩ
CINDM
CINCM
16.5
33
pF
pF
4.995
V
V
V
V
mV
mV
mV
mV
mA
Ω
VOH
VOL
ISC
ZOUT
PSRR
ISY
RL = 10 kΩ to VCM
−55°C ≤ TA ≤ +125°C
RL = 2 kΩ to VCM
−55°C ≤ TA ≤ +125°C
RL = 10 kΩ to VCM
−55°C ≤ TA ≤ +125°C
RL = 2 kΩ to VCM
−55°C ≤ TA ≤ +125°C
4.99
4.98
4.96
4.94
5
20
10
20
40
60
±40
0.1
f = 1 kHz, AV = +10
VSY = 2.2 V to 5.5 V
−55°C ≤ TA ≤ +125°C
IO = 0 mA
−55°C ≤ TA ≤ +125°C
4.98
130
127
150
1.5
1.8
2.2
dB
dB
mA
mA
SR
tS
UGC
ΦM
GBP
f−3dB
RL = 10 kΩ, CL = 100 pF, AV = +1
VIN = 4 V step, RL = 10 kΩ, CL = 100 pF, AV = −1
VIN = 10 mV p-p, RL = 10 kΩ, CL = 100 pF, AV = +1
VIN = 10 mV p-p, RL = 10 kΩ, CL = 100 pF, AV = +1
VIN = 10 mV p-p, RL = 10 kΩ, CL = 100 pF, AV = +100
VIN = 10 mV p-p, RL = 10 kΩ, CL = 100 pF, AV = +1
RL = 10 kΩ, CL = 100 pF, AV = −10
0.5
10
4
57
3.4
6.5
50
V/μs
µs
MHz
Degrees
MHz
MHz
μs
en p-p
en
f = 0.1 Hz to 10 Hz, AV = +100
f = 1 kHz, AV = +100
f = 1 kHz, AV = +100, VCM = 4.5 V
f = 0.1 Hz to 10 Hz, AV = +100
f = 1 kHz, AV = +100
99
5.9
5.3
10
0.5
nV p-p
nV/√Hz
nV/√Hz
pA p-p
pA/√Hz
in p-p
in
Rev. 0 | Page 5 of 17
ADA4528-2-EP
Enhanced Product
ABSOLUTE MAXIMUM RATINGS
THERMAL RESISTANCE
Table 3.
Parameter
Supply Voltage
Input Voltage
Input Current1
Differential Input Voltage
Output Short-Circuit Duration to GND
Storage Temperature Range
Operating Temperature Range
Junction Temperature Range
Lead Temperature (Soldering, 60 sec)
1
Rating
6V
±VSY ± 0.3 V
±10 mA
±VSY
Indefinite
−65°C to +150°C
−55°C to +125°C
−65°C to +150°C
300°C
Thermal performance is directly linked to printed circuit board
(PCB) design and operating environment.
Careful attention to PCB thermal design is required.
θJA is the natural convection junction to ambient thermal resistance
measured in a one cubic foot sealed enclosure (still air).
θJC is the junction to case thermal resistance, measured on the
exposed pad of the package.
Table 4. Thermal Resistance
The input pins have clamp diodes to the power supply pins. Limit the input
current to 10 mA or less whenever input signals exceed the power supply
rail by 0.3 V.
Stresses at or above those listed under Absolute Maximum
Ratings may cause permanent damage to the product. This is a
stress rating only; functional operation of the product at these
or any other conditions above those indicated in the operational
section of this specification is not implied. Operation beyond
the maximum operating conditions for extended periods may
affect product reliability.
Package Type
CP-8-191
1
θJA
52
Thermal reporting per JEDEC JESD51-12.
ESD CAUTION
Rev. 0 | Page 6 of 17
θJC
3.9
Unit
°C/W
Enhanced Product
ADA4528-2-EP
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
ADA4528-2-EP
TOP VIEW
(Not to Scale)
8 V+
–IN A 2
7 OUT B
+IN A 3
6 –IN B
V– 4
5 +IN B
NOTES
1. CONNECT THE EXPOSED PAD TO
V– OR LEAVE IT UNCONNECTED.
14897-207
OUT A 1
Figure 3. Pin Configuration
Table 5. Pin Function Descriptions
Pin No.
1
2
3
4
5
6
7
8
Mnemonic
OUT A
−IN A
+IN A
V−
+IN B
−IN B
OUT B
V+
EPAD
Description
Output, Channel A.
Inverting Input, Channel A.
Noninverting Input, Channel A.
Negative Supply Voltage.
Noninverting Input, Channel B.
Inverting Input, Channel B.
Output, Channel B.
Positive Supply Voltage.
Exposed Pad. Connect the exposed pad to V− or leave it unconnected.
Rev. 0 | Page 7 of 17
ADA4528-2-EP
Enhanced Product
TYPICAL PERFORMANCE CHARACTERISTICS
TA = 25°C, unless otherwise noted.
30
16
VSY = 2.5V
VCM = VSY/2
NUMBER OF AMPLIFIERS
NUMBER OF AMPLIFIERS
VSY = 5V
VCM = VSY/2
14
25
20
15
10
12
10
8
6
4
5
VOS (µV)
14897-005
VOS (µV)
Figure 4. Input Offset Voltage (VOS) Distribution
Figure 7. Input Offset Voltage (VOS) Distribution
30
45
VSY = 2.5V
VCM = VSY/2
40
VSY = 5V
VCM = VSY/2
25
35
NUMBER OF AMPLIFIERS
NUMBER OF AMPLIFIERS
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
0
–2.0
–1.8
–1.6
–1.4
–1.2
–1.0
–0.8
–0.6
–0.4
–0.2
–2.0
–1.8
–1.6
–1.4
–1.2
–1.0
–0.8
–0.6
–0.4
–0.2
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
0
14897-002
2
30
25
20
15
20
15
10
10
9
10
8
6
7
5
3
4
2
1
0
–1
–2
–4
–3
TCVOS (nV/°C)
TCVOS (nV/°C)
Figure 5. Input Offset Voltage Temperature Coefficient (TCVOS) Drift Distribution
Figure 8. Input Offset Voltage Temperature Coefficient (TCVOS) Drift Distribution
1.0
1.0
VSY = 5V
0.8
0.6
0.6
0.4
0.4
0.2
0.2
VOS (µV)
0.8
0
0
–0.2
–0.4
–0.4
–0.6
–0.6
–0.8
–0.8
–1.0
0
0.5
1.5
1.0
VCM (V)
2.0
2.5
14897-004
–0.2
–1.0
0
1
3
2
VCM (V)
4
5
14897-007
VSY = 2.5V
VOS (µV)
–5
–7
–6
–8
–9
–10
9
0
10
8
7
6
5
4
3
2
1
0
–1
–2
–3
–4
–5
–6
–7
–8
–9
–10
0
14897-006
14897-003
5
5
Figure 9. Input Offset Voltage (VOS) vs. Common-Mode Voltage (VCM)
Figure 6. Input Offset Voltage (VOS) vs. Common-Mode Voltage (VCM)
Rev. 0 | Page 8 of 17
Enhanced Product
ADA4528-2-EP
200
250
200
VSY = 2.5V
VCM = VSY/2
150
VSY = 5V
VCM = VSY/2
150
I B+
IB+
100
100
50
IB (pA)
IB (pA)
50
0
0
–50
–50
I B–
–100
I B–
–150
0
25
50
75
100
125
TEMPERATURE (°C)
–150
–75
OUTPUT VOLTAGE (V OL ) TO SUPPLY RAIL (mV)
14
12
RL = 2kΩ
8
6
RL = 10kΩ
2
–50
–25
50
0
25
TEMPERATURE (°C)
75
100
125
14897-016
OUTPUT VOLTAGE (V OL) TO SUPPLY RAIL (mV)
VSY = 2.5V
0
–75
OUTPUT VOLTAGE (V OH) TO SUPPLY RAIL (mV)
16
VSY = 2.5V
14
12
RL = 2kΩ
10
8
6
RL = 10kΩ
2
0
–75
–50
–25
50
0
25
TEMPERATURE (°C)
75
100
25
50
75
100
125
125
30
VSY = 5V
25
20
RL = 2kΩ
15
10
RL = 10kΩ
5
0
–75
–50
–25
50
0
25
TEMPERATURE (°C)
75
100
125
Figure 14. Output Voltage (VOL) to Supply Rail vs. Temperature
30
VSY = 5V
25
RL = 2kΩ
20
15
10
RL = 10kΩ
5
0
–75
14897-015
OUTPUT VOLTAGE (V OH) TO SUPPLY RAIL (mV)
Figure 11. Output Voltage (VOL) to Supply Rail vs. Temperature
4
0
Figure 13. Input Bias Current (IB) vs. Temperature
16
4
–25
TEMPERATURE (°C)
Figure 10. Input Bias Current (IB) vs. Temperature
10
–50
14897-019
–25
–50
–25
0
25
50
75
100
125
TEMPERATURE (°C)
Figure 12. Output Voltage (VOH) to Supply Rail vs. Temperature
Figure 15. Output Voltage (VOH) to Supply Rail vs. Temperature
Rev. 0 | Page 9 of 17
14897-117
–50
14897-008
–200
–75
14897-110
–100
ADA4528-2-EP
Enhanced Product
135
120
90
90
90
90
60
45
60
45
120
135
10k
OPEN-LOOP GAIN (dB)
–90
10M
1M
100k
0
VSY = 5V
RL = 10kΩ
CL = 100pF
0
–45
14897-022
FREQUENCY (Hz)
–30
1k
–45
10k
100k
FREQUENCY (Hz)
Figure 16. Open-Loop Gain and Phase vs. Frequency
Figure 19. Open-Loop Gain and Phase vs. Frequency
60
60
VSY = 5V
VSY = 2.5V
50
50
AV = 100
CLOSED-LOOP GAIN (dB)
CLOSED-LOOP GAIN (dB)
AV = 100
40
30
AV = 10
20
10
AV = 1
0
40
30
AV = 10
20
10
AV = 1
0
–10
–10
100
1k
10k
100k
1M
10M
FREQUENCY (Hz)
–20
10
14897-026
–20
10
–90
10M
1M
100
1k
10k
100k
1M
10M
FREQUENCY (Hz)
14897-029
–30
1k
GAIN
30
14897-025
VSY = 2.5V
RL = 10kΩ
CL = 100pF
PHASE (Degrees)
0
0
Figure 20. Closed-Loop Gain vs. Frequency
Figure 17. Closed-Loop Gain vs. Frequency
140
160
VSY = 2.5V
140
100
CMRR (dB)
100
80
60
VCM = VSY/2
VCM = 1.1V
60
10k
100k
FREQUENCY (Hz)
1M
10M
Figure 18. CMRR vs. Frequency
0
100
1k
10k
100k
FREQUENCY (Hz)
Figure 21. CMRR vs. Frequency
Rev. 0 | Page 10 of 17
1M
10M
14897-031
1k
14897-126
20
0
100
80
40
40
20
VSY = 5V
VCM = VSY/2
120
120
CMRR (dB)
OPEN-LOOP GAIN (dB)
GAIN
30
PHASE (Degrees)
PHASE
PHASE
Enhanced Product
ADA4528-2-EP
120
120
VSY = 5V
100
100
80
80
PSRR (dB)
60
PSRR+
40
60
PSRR+
40
20
20
0
0
1k
10k
100k
1M
10M
FREQUENCY (Hz)
–20
100
14897-032
1k
Figure 22. PSRR vs. Frequency
10M
VSY = 5V
VSY = 2.5V
100
10
10
1
AV = 100
ZOUT (Ω)
AV = 100
ZOUT (Ω)
1M
1k
100
AV = 10
AV = 1
AV = 1
0.01
0.01
10k
100k
1M
10M
FREQUENCY (Hz)
14897-027
0.1
1k
1k
10k
100k
1M
10M
FREQUENCY (Hz)
Figure 26. Closed-Loop Output Impedance (ZOUT) vs. Frequency
14897-037
VSY = ±2.5V
VIN = 4V p-p
AV = 1
RL = 10kΩ
CL = 100pF
TIME (20µs/DIV)
0.001
100
VOLTAGE (0.5V/DIV)
Figure 23. Closed-Loop Output Impedance (ZOUT) vs. Frequency
AV = 10
1
0.1
VOLTAGE (1V/DIV)
100k
Figure 25. PSRR vs. Frequency
1k
0.001
100
10k
FREQUENCY (Hz)
VSY = ±1.25V
VIN = 2V p-p
AV = 1
RL = 10kΩ
CL = 100pF
TIME (20µs/DIV)
Figure 24. Large Signal Transient Response
Figure 27. Large Signal Transient Response
Rev. 0 | Page 11 of 17
14897-030
–20
100
14897-035
PSRR–
PSRR–
14897-034
PSRR (dB)
VSY = 2.5V
VOLTAGE (50mV/DIV)
Enhanced Product
TIME (1µs/DIV)
TIME (1µs/DIV)
Figure 28. Small Signal Transient Response
16
VSY = 2.5V
VIN = 100mV p-p
AV = 1
RL = 10kΩ
12
12
8
OVERSHOOT (%)
OS+
10
OS–
6
10
6
4
2
2
10
100
1000
LOAD CAPACITANCE (pF)
1
INPUT VOLTAGE (V)
INPUT
0
–0.5
VSY = ±1.25V
AV = –10
VIN = 187.5mV
RL = 10kΩ
CL = 100pF
OUTPUT
0
–1
2
OUTPUT
1
0
14897-043
2
1
TIME (10µs/DIV)
1000
0.5
3
OUTPUT VOLTAGE (V)
INPUT VOLTAGE (V)
INPUT
VSY = ±2.5V
AV = –10
VIN = 375mV
RL = 10kΩ
CL = 100pF
100
Figure 32. Small Signal Overshoot vs. Load Capacitance
0.5
–0.5
10
LOAD CAPACITANCE (pF)
Figure 29. Small Signal Overshoot vs. Load Capacitance
0
OS–
0
14897-033
0
OS+
8
4
1
VSY = 5V
VIN = 100mV p-p
AV = 1
RL = 10kΩ
14
Figure 30. Positive Overload Recovery
–1
TIME (10µs/DIV)
Figure 33. Positive Overload Recovery
Rev. 0 | Page 12 of 17
14897-040
14
OVERSHOOT (%)
Figure 31. Small Signal Transient Response
14897-036
16
14897-041
VSY = ±2.5V
VIN = 100mV p-p
AV = 1
RL = 10kΩ
CL = 100pF
14897-038
VSY = ±1.25V
VIN = 100mV p-p
AV = 1
RL = 10kΩ
CL = 100pF
OUTPUT VOLTAGE (V)
VOLTAGE (50mV/DIV)
ADA4528-2-EP
VSY = ±1.25V
AV = –10
VIN = 187.5mV
RL = 10kΩ
CL = 100pF
1
OUTPUT
0
–1
0
OUTPUT VOLTAGE (V)
1
OUTPUT
–2
–3
Figure 37. Negative Overload Recovery
INPUT
INPUT
VOLTAGE (2V/DIV)
VSY = 2.5V
RL = 10kΩ
CL = 100pF
DUT AV = –1
+7.5mV
0
–7.5mV
+20mV
OUTPUT
0
ERROR BAND
POST GAIN = 5
TIME (10µs/DIV)
TIME (10µs/DIV)
Figure 38. Positive Settling Time to 0.1%
VSY = 5V
RL = 10kΩ
CL = 100pF
DUT AV = –1
VOLTAGE (2V/DIV)
VSY = 2.5V
RL = 10kΩ
CL = 100pF
DUT AV = –1
+7.5mV
TIME (10µs/DIV)
0
INPUT
+20mV
ERROR BAND
POST GAIN = 5
OUTPUT
–7.5mV
0
–20mV
14897-045
OUTPUT
ERROR BAND
POST GAIN = 5
14897-047
14897-044
–20mV
Figure 35. Positive Settling Time to 0.1%
INPUT
VSY = 5V
RL = 10kΩ
CL = 100pF
DUT AV = –1
Figure 36. Negative Settling Time to 0.1%
TIME (10µs/DIV)
Figure 39. Negative Settling Time to 0.1%
Rev. 0 | Page 13 of 17
14897-048
ERROR BAND
POST GAIN = 5
–2
TIME (10µs/DIV)
Figure 34. Negative Overload Recovery
OUTPUT
–1
VSY = ±2.5V
AV = –10
VIN = 375mV
RL = 10kΩ
CL = 100pF
TIME (10µs/DIV)
VOLTAGE (1V/DIV)
–0.5
14897-039
–0.5
INPUT
0
OUTPUT VOLTAGE (V)
INPUT
0
0.5
14897-042
INPUT VOLTAGE (V)
ADA4528-2-EP
0.5
VOLTAGE (1V/DIV)
INPUT VOLTAGE (V)
Enhanced Product
ADA4528-2-EP
Enhanced Product
100
10
1
1
10
100
1k
VSY = 5V
AV = 100
VCM = VSY/2
10
10k
1
FREQUENCY (Hz)
1
1k
10k
Figure 43. Voltage Noise Density vs. Frequency
10
10
100
1k
10k
100k
FREQUENCY (Hz)
1
0.1
1
10
100
1k
10k
100k
FREQUENCY (Hz)
Figure 41. Current Noise Density vs. Frequency
Figure 44. Current Noise Density vs. Frequency
VSY = 2.5V
AV = 100
VCM = VSY/2
TIME (1s/DIV)
Figure 45. 0.1 Hz to 10 Hz Noise
Figure 42. 0.1 Hz to 10 Hz Noise
Rev. 0 | Page 14 of 17
14897-050
TIME (1s/DIV)
14897-053
INPUT VOLTAGE (20nV/DIV)
INPUT VOLTAGE (20nV/DIV)
VSY = 5V
AV = 100
VCM = VSY/2
14897-153
10
14897-150
1
1
VSY = 5V
AV = 100
VCM = VSY/2
CURRENT NOISE DENSITY (pA/√Hz)
VSY = 2.5V
AV = 100
VCM = VSY/2
CURRENT NOISE DENSITY (pA/√Hz)
100
FREQUENCY (Hz)
Figure 40. Voltage Noise Density vs. Frequency
0.1
10
14897-049
VOLTAGE NOISE DENSITY (nV/√Hz)
VSY = 2.5V
AV = 100
VCM = VSY/2
14897-046
VOLTAGE NOISE DENSITY (nV/√Hz)
100
ADA4528-2-EP
10
10
1
1
0.1
0.001
0.001
VSY = 5V
AV = 1
f = 1kHz
RL = 10kΩ
0.01
VSY = 2.5V
AV = 1
f = 1kHz
RL = 10kΩ
0.01
0.1
1
10
AMPLITUDE (V p-p)
0.001
0.001
14897-152
0.01
0.1
0.01
0.1
1
10
AMPLITUDE (V p-p)
Figure 46. THD + N vs. Amplitude
14897-155
THD + N (%)
THD + N (%)
Enhanced Product
Figure 49. THD + N vs. Amplitude
1
1
VSY = 2.5V
AV = 1
RL = 10kΩ
80kHz LOW-PASS FILTER
VIN = 2V p-p
VSY = 5V
AV = 1
RL = 10kΩ
80kHz LOW-PASS FILTER
VIN = 2V p-p
THD + N (%)
0.1
THD + N (%)
0.1
100
1k
10k
100k
FREQUENCY (Hz)
0.001
10
14897-056
100k
0
VSY = 2.5V
RL = 2kΩ
AV = –100
VSY = 5V
RL = 2kΩ
AV = –100
–20
CHANNEL SEPARATION (dB)
–20
–40
VIN = 0.5V p-p
VIN = 1V p-p
VIN = 1.2V p-p
–80
–100
–40
–60
VIN = 1V p-p
VIN = 2V p-p
VIN = 2.4V p-p
–80
–100
–120
–120
1k
10k
FREQUENCY (Hz)
100k
14897-262
CHANNEL SEPARATION (dB)
10k
Figure 50. THD + N vs. Frequency
0
–140
100
1k
FREQUENCY (Hz)
Figure 47. THD + N vs. Frequency
–60
100
–140
100
1k
10k
FREQUENCY (Hz)
Figure 51. Channel Separation vs. Frequency
Figure 48.Channel Separation vs. Frequency
Rev. 0 | Page 15 of 17
100k
14897-263
0.001
10
14897-057
0.01
0.01
ADA4528-2-EP
Enhanced Product
2.0
1.6
VSY = 5.0V
VSY = 2.5V
1.4
1.2
1.0
–75
–50
–25
0
25
50
75
100
125
TEMPERATURE (°C)
14897-024
ISY PER AMPLIFIER (mA)
1.8
Figure 52. Supply Current (ISY) per Amplifier vs. Temperature
Rev. 0 | Page 16 of 17
Enhanced Product
ADA4528-2-EP
OUTLINE DIMENSIONS
2.54
2.44
2.34
3.10
3.00 SQ
2.90
0.65 BSC
8
PIN 1 INDEX
AREA
1.70
1.60
1.50
EXPOSED
PAD
0.45
0.40
0.35
4
TOP VIEW
PKG-4263
0.80
0.75
0.70
SEATING
PLANE
0.05 MAX
0.02 NOM
0.35
0.30
0.20
1
BOTTOM VIEW
0.20 MIN
PIN 1
INDICATOR
(R 0.20)
FOR PROPER CONNECTION OF
THE EXPOSED PAD, REFER TO
THE PIN CONFIGURATION AND
FUNCTION DESCRIPTIONS
SECTION OF THIS DATA SHEET.
0.203 REF
05-22-2013-A
5
Figure 53. 8-Lead Lead Frame Chip Scale Package [LFCSP]
3 mm × 3 mm Body and 0.75 mm Package Height
(CP-8-19)
Dimensions shown in millimeters
ORDERING GUIDE
Model1
ADA4528-2TCPZ-EP
ADA4528-2TCPZ-EPR7
1
Temperature
Range
−55°C to +125°C
−55°C to +125°C
Package Description
8-Lead Lead Frame Chip Scale Package [LFCSP]
8-Lead Lead Frame Chip Scale Package [LFCSP]
Z = RoHS Compliant Part.
©2016 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D14897-0-8/16(0)
Rev. 0 | Page 17 of 17
Package Option
CP-8-19
CP-8-19
Branding
A3H
A3H