Universe® Large with HID Optic – UCL • Horizontal reflector • Sag glass lens & Opal lens available 1. LUMINAIRE 2. LUMINOUS HOOD TYPE • Available with 5 hood styles and 4 luminous elements • Powder coat finish in 13 standard colors with a polymer primer sealer 3. OPTICS 4. LAMP/ 6. HOOD 5. COLOR BALLAST OPTIONS 7. OPTIONS 8. MOUNTING UCL 1. LUMINAIRE UCL 2. LUMINOUS /HOOD NO LUMINOUS & HOOD ANGLED ANG SPECIFICATIONS 5. COLOR Universe large housing scale BELL BEL FLARED SKIRTED FLR SKB LUMINOUS & HOOD 4 LUMINOUS SOLID WINDOWS RINGS VERTICAL SLOTS WND-ANG SR-ANG WND-BELSR-BEL WND-FLRSR-FLR WND-SKBSR-SKB LUMINOUS RINGS VSL-ANG LUM-ANG VSL-BELLUM-BEL VSL-FLRLUM-FLR VSL-SKBLUM-SKB Standard Color WH Arctic White BL Black BLT Matte Black DB Dark Bronze DGN Dark Green TT Titanium WDB Weathered Bronze MDB Bronze Metallic VBU Verde Blue CRT Corten MAL Matte Aluminum MG Medium Grey AGN Antique Green LG Light Grey Premium Color SHK Shamrock SPP Salt and Pepper SFM Seafoam WCP Weathered Copper RAL RAL 4 digit Color CUSTOM Custom Color All internal and external hardware shall be stainless steel. The fixture shall consist of a die cast aluminum door frame and ring assembly. The hood ring assembly shall be fully sealed with a molded silicone gasket. The door frame shall be hinged to the ring and opened with two captive fasteners for relamping. The tempered sag glass lens is held in the door frame with a molded silicone gasket. 6. OPTIONS - HOOD (Natural copper hood is unfinished to develop a patina over time) COP (Copper) STS (Stainless steel) 3. OPTICS HORIZONTAL REFLECTOR (FTG flat glass lens standard) H2 (Type 2) H4 (Type 4) H3 (Type 3) H5 (Type 5) OPAL LENS (Acrylic) OAL (Maximum 250 watts) 7.OPTIONS SLC (Internal sleeve to block light when luminous element chosen) FLD (Lightly diffused finish on flat glass lens. Not for opal lens) HSS (House side shield. Horizontal reflector only) 347V (120/240/347 volt ballast. For HID lamp) 4. LAMP/BALLAST PULSE START METAL HALIDE (120/208/240/277 volt) Medium base, ED-17 lamp 150PSMH (150W, Opal lens only) Mogul base, ED-17 lamp 175PSMH (175W, Opal lens only) Mogul base, ED-28 lamp 150PSMH (150W, Horizontal lens only) 200PSMH (200W, Opal lens only) ) 250PSMH (250W) 320PSMH (320W, Horizontal lens only) 350PSMH (350W, Horizontal lens only) 400PSMH (400W, Horizontal lens only) HIGH PRESSURE SODIUM (120/208/240/277 volt) Mogul base, ED-23 1/2 lamp 150HPS (150W, Opal lens only) Mogul base, ED-18 lamp 250HPS 400HPS (Horizontal lens only) All ballasts are factory wired for 277 volts, unless specified. Lamps not included, except LED. HOUSING The fixture ballast housing shall be one-piece diecast aluminum. The luminous rings shall be clear acrylic with an internal lens. The lens shall be lightly diffused acrylic, sealed to the housing and shade with molded silicone gaskets. The hood and spacers shall be heavy gauge spun aluminum with hemmed edges for added rigidity. QL (T-4 socket. Horizontal reflector only) QRS (T-4 restrike controller & socket. Horizontal reflector only) PM (Post top mount. Opal lens only) PMS (Pendant mount, 48"/1220mm stem & canopy with swivel) INNER LENS – (Lum only, Optional inner lens adds color to the ring edges when illuminated) BL (Blue) GRN (Green) RD (Red) OAL – Molded opal acrylic lens and an aluminum frame. Three captive fasteners shall be loosened to turn and remove the lens for relamping. FULL CUTOFF (Horizontal only) The reflector models, less luminous element, is classified as full cutoff, meaning there is zero light emitted at 90° horizontal or above. OPTICAL ASSEMBLY (Horizontal only) The reflector module shall be composed of faceted, semi specular anodized aluminum panels rigidly attached in an aluminum tray. The reflector shall be easily removed by loosening four screws and lifting it out the tray. The reflector tray shall be rotatable on 90° centers for orienting the light distribution. The reflectors shall meet ANSIIES standards for full cutoff (without luminous element). 8. MOUNTING – Must choose one WALL MOUNT WMA4 WMA5WMA6 WMA8 WMA9DWMA10WMA11 WMA12 WMA16 WMA17WMA18 WMA20 WMA22DWMA24 WMA37 WMA38 WMA39 POLE MOUNT SLA2 SLA3SLA4 SLA4-2 SLA7 SLA7-2SLA7(5)SLA7(5)-2 SLA8DSLA9 SLA9-2SLA10 SLA10-2SLA16 SLA16-2SLA17 SLA17-2SLA17(5) SLA17(5)-2SLA18 SLA18-2 SLA20 SLA20-2 SLA20A SLA20A-2 SLA20B SLA20B-2 SLA20C SLA20C-2 SLA20D SLA20D-2 SLA22D SLA24 SLA24-2 SLA24(5) SLA24(5)-2 TRA4 TRA7 TRA7-2 TRA8 TRA8-2 TRA9 TRA9-2 See next page TYPE JOB NOTES Visit www.aal.net for Arms, Poles & Accessories Specification Guide ARCHITECTURAL AREA LIGHTING 16555 East Gale Ave. | City of Industry | CA 91745 P 626.968.5666 | F 626.369.2695 | www.aal.net Copyright © 2012 | Rev 10.15 | 1 | Universe® Large with HID Optic – UCL ELECTRICAL The ballast shall be mounted on a prewired tray with a quick disconnect plug and removed by loosening two captive screws. HID ballasts are high power factor, rated for -30°C starting. Sockets are medium or G12 base, pulse rated porcelain. Ballasts are wired at the factory for 277 volts, MOUNTING The fixture shall be attached to the arm assembly with three stainless steel bolts. The connection shall be sealed with a silicone compression gasket. CERTIFICATION Listed with ETL for outdoor, wet location use. Conforms to UL1598 and Canadian CSA Std. C22.2 no.250 standard. The Luminaire shall be constructed to IP65 standards. The first dimension is the height of fixtures with horizontal reflectors. The second is for the height of fixtures with the opal lens. EPA for horizontal configuration only. DIMENSIONS HOOD NO LUMINOUS 4 LUMIOUS SOLID RINGS (SR) VERTICAL SLOTS LUMIOUS RINGS WINDOW (WIN) (VSL) (LUM) ANG DIA: 30"/760mm PM – The post top version shall slip over a 4"/100mm O.D. pole or tenon, and secured with six stainless steel set screws. FINISH Fixture finish consists of a five stage pretreatment regimen with a polymer primer sealer, oven dry off, and top coated with a thermoset super TGIC polyester powder coat finish. The finish shall meet the AAMA 605.2 performance specification which includes passing a 3000 hour salt spray test for corrosion resistance. TYPE 21.4"/545mm 24.5"/630mm EPA: 1.12 26.7"/680mm 30"/760mm EPA: .60 26.7"/680mm 30"/760mm EPA: 1.36 26.7"/680mm 30"/760mm EPA: 1.35 26.7"/680mm 30"/760mm EPA: 1.36 22"/560mm 25"/635mm EPA: 1.16 26.7"/680mm 30"/760mm EPA: 1.38 26.7"/680mm 30"/760mm EPA: 1.39 26.7"/680mm 30"/760mm EPA: 1.38 26.7"/680mm 30"/760mm EPA: 1.39 21"/535mm 25"/635mm EPA: 1.05 26.7"/680mm 30"/760mm EPA: 1.27 26.7"/680mm 30"/760mm EPA: 1.28 26.7"/680mm 30"/760mm EPA: 1.27 26.7"/680mm 32"/810mm EPA: 1.28 32.5"/826mm 32.5"/826mm EPA: 1.95 UCM-LUM-SKB 32.25"/820mm BEL DIA: 30"/760mm FLR DIA: 32"/810mm WARRANTY / TERMS AND CONDITIONS OF SALE Download: http://www.hubbelllighting.com/resources/warranty/ SKB 27.25"/693mm 27.25"/693mm EPA: 1.72 DIA: 32"/810mm 32.5"/826mm 32.25"/820mm 32.5"/826mm 32.25"/820mm Isoilluminance Diagram EPA: 1.95 EPA: 1.96 32"/810mm EPA: 1.96 CATALOG NUMBER: UCL-H3-250MH FILENAME: UCL-H3-250MH.IES Isoilluminance Diagram CATALOG NUMBER: UCL-H3-250MH FILENAME: UCL-H3-250MH.IES UCL H3 250MH WATTAGE: 295 LUMEN OUTPUT: 15141 B3 U0 G3 FORWARD LIGHT LUMEN 5.8% 1209 FL30 o FM60 o 22.4% 4713 FH80 o 21.1% 4430 0.010.02 FVH90 o 0.2% 42 0.010.02 0.05 0.1 0.2 1. 0.5 2. 5. 0.05 0.1 LIGHT BACK 0.2 4.5% BL30 o 2. BM60 o 1.12.3% BH80 o 5.7% 0.2% BVH90 o UPLIGHT UL100 o UH180 o 0% 0% 935 2583 1187 35 0 0 0.5 5. EFFICACY: 71.2 MountingMultiplier Height -------------Multiplier 4.000 -----------1.778 -------------1.000 10 0.640 4.000 15 0.444 1.778 0.327 20 0.250 1.000 0.198 0.160 25 0.640 30 0.444 35 0.327 40 0.250 45 0.198 50 0.160 Mounting Height ----------10 15 20 25 30 35 40 45 50 UPLIGHT 0% DOWNLIGHT 100% Mounting Height = 20 '. Each box is one mounting height. 20' MOUNTING HEIGHT Mounting Height = 20 '. Each box is one mounting height. AAL reserves the right to change product specifications without notice. Reported data calculated from manufacturer's data file, based on IESNA recommended methods. IES files can be found at www.aal.net Photometric Viewer v3.4 ARCHITECTURAL AREA LIGHTING 16555 East Gale Ave. | City of Industry | CA 91745 P 626.968.5666 | F 626.369.2695 | www.aal.net Copyright © 2012 | Rev 10.15 | 2 |