Project: _________________________________________ Qty: ___________
Type:
LARGE WALL MOUNT LS11 • Metal Halide
Surface Ceiling
13-1/16" (332mm)
5-11/16"
(144mm)
2-9/16"
(66mm)
MA
LS11 Large Simple Mount
7-7/8"
(200mm)
5-5/8"
(143mm)
45°
10-9/16"
(268mm)
.P. @
XC
25°
MOUNTING: All standard mounts are fully adjustable and lockable. Designed for remote or
integral ballast. See Mounting Details above.
TYPE: Large profile with smooth detail.
Indoor: Captive, extruded aluminum hinge with non-gasketed regressed lens.
Outdoor: Captive, extruded aluminum door with window cut-out and silicone gasketed
regressed lens.
Lens: Micro-prismatic tempered glass lens standard.
Natatorium: Fully gasketed, constructed from non-ferrous materials.
LENGTH CHART
Lamp
Nominal
Actual
Lamp
Nominal
Actual
1/M150ED17
16LONG
L = 16"
1/M210T9
20LONG
L=20"
1/M250T15
20LONG
L=20"
1/M315T9
20LONG
L=20"
1/M400ED18
20LONG
L=20"
1/MP250T15
20LONG
L=20"
1/MP320T15
20LONG
L=20"
1/MP350T15
20LONG
L=20"
PERFORMANCE: Asymmetric distribution provides a concentration of light on target surface
for smooth illumination. Maximum candlepower aimed 25° above nadir has less than 10%
spill light within the 0-25° zone and less than 2% spill light within the 90-180° zone.
ELECTRICAL: Integral constant wattage autotransformer or electronic ballast. Pulse rated
medium lamp holder for M150, PGZ18 lamp holder for MH210 and MH315, pulse rated
mogul lamp holder supplied for all other lamps. T-15 and ED-18 lamp options are equipped
with lamp alignment bracket. Use 90°C supply wire.
PROFILE- P1 (basic): Anodized, extruded aluminum specular reflector with solid aluminum
endcaps and stainless steel hardware. Extruded aluminum glare control visor can be
combined with P1 basic profile to create P5 profile.
FINISHES: 6 stage pre-treated polyester powder coat painted finish. All hardware is
stainless steel.
WARRANTY - 1-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Actual performance may differ as a result of end-user environment and application.
Ordering Information
EXAMPLE: LS11 INT 16LONG LS 1/M150ED17 120 P1 ALP
LS1
LS
Series
LS11
Large Simple Yoke
Integral Ballast
Surface Ceiling
Series
Environment
Length
Reflector Type
Source
WL
NT
INT
16LONG 16 Inch Nominal Length
20LONG 20 Inch Nominal Length
LS Large
Smooth
1/M150ED17
1/M210T9
Wet Location
Natatorium
Interior Location
1/M250T15
1/MP250T15
Voltage
120
277
347*
120 volt
277 volt
347 volt
External Shielding
Visor
Quartz Restrike
Finish
(blank) No Baffle
SBB
Straight Blade Baffle
P1 Basic
P5 Short
(blank) No Quartz Restrike
QRS
Quartz Restrike
SGW
ALP
SGB
ABP
LGP
LSP
(1) 150w ED17 Metal Halide/Medium
(1) 210w T9 Ceramic Metal Halide/PGZ18
(Available 277 only.)
(1) 250w T15 Ceramic Metal Halide/
Mogul or POMB
(1) 250w T15 Metal Halide Pulse Start/
Mogul
1/M315T9
1/MP320T15
1/MP350T15
1/M400ED18
(1) 315w T9 Ceramic Metal Halide/PGZ18
(Available 277 only.)
(1) 320w T15 Metal Halide Pulse Start/
Mogul
(1) 350w T15 Metal Halide Pulse Start/
Mogul
(1) 400w ED18 Ceramic Metal Halide/
Mogul or POMB
Special
Semi Gloss White
Aluminum (Matte)
Semi Gloss Black
Antique Brass Paint
Light Gold Iridescent
Light Silver
MBP
PBP
PEW
PGP
CPF*
Medium Bronze
Pale Bronze
Pewter
Pale Gold
Custom Paint Finish
MOD*
Modification / Consult Factory
*Available by modification only, consult factory
Visit www.winonalighting.com for the most complete and current information.
Winona Lighting • 3760 West Fourth Street • Winona, MN 55987 • 800.328.5291 • www.winonalighting.com
© 2015 Acuity Brands Lighting, Inc. All Rights Reserved. “Winona” is a registered trademark of Acuity Brands Lighting. Products herein
may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
All fixtures UL listed, USA and Canada
Rev. 07/23/15
LS11_MH
1
Metal Halide • Ballast Data Sheet
Damp / Dry Location
Ballast Specifications (Remote or Integral)
Catalog #
(lamp code)
MH20 Mini
MH39 Mini
MH70 Mini
MH39 Small
MH70 Small
MH109
MH140
MH150
MH189
MH220
MH300
M150
MH210
MP250
MH250
MH315
MP320*
MP350*
MH400
MH800**
MP250 X-Large
MP400
MP800**
MP1000
Lamp
Description
ANSI Code
(1)20W T4 or T4.5
(1)39W T4 or T4.5
(1)70W T4 or T4.5
(1)39W T6
(1)70W T6
(1)39W T6 / (1)70W T6
(2)70W T6
(1)150W T6
(1)39W T6 / (1)150W T6
(1)70W T6 / (1)150W T6
(2)150W T6
(1)150W ED17
(1)210W T9
(1)250W T15 PS
(1)250W T15 CMH
(1)315W T9
(1)320W T15 PS
(1)350W T15 PS
(1)400W ED18 CMH
(2)400W ED18 CMH
(1)250W ED28 PS
(1)400W ED28 PS
(2)400W ED28 PS
(1)1000W BT37 or T25 PS
M156
M130
M139
M130
M139
M130 / M139
M139
M102 or 142
M130 / M102 or 142
M139 / M102 or 142
M102 or 142
M142
C183
M138
S50
C182
M132
M131
S51
S51
M138
M135
M135
M141
Ballast
Type
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Magnetic CWA
Magnetic CWA
Electronic
Magnetic CWA
Magnetic CWA
Magnetic CWA
Magnetic CWA
Magnetic CWA
Magnetic CWA
Magnetic CWA
Magnetic CWA
* Advance Electronic Ballast available. Contact factory for details.
** MH800, MP800 lamping requires 2 ballasts per fixture.
*** Wire must be UL3321/AWM, UL3071/SEW-2 or SF-2. Contact factory for longer remote distance up to 50'.
Wet Location
Ballast Specifications (Remote or Integral)
Catalog #
(lamp code)
MH20 Mini
MH39 Mini
MH39 Small
MH70 Mini
MH70 Small
MH109
MH140
MH150
MH189
MH220
MH300
M150
MH210
MP250
MH250
MH315
MP320*
MP350*
MH400
MH800**
MP250 X-Large
MP400
MP800**
MP1000
Lamp
Description
ANSI Code
(1)20W T4 or T4.5
(1)39W T4 or T4.5
(1)39W T6
(1)70W T4 or T4.5
(1)70W T6
(1)39W T6 / (1)70W T6
(2)70W T6
(1)150W T6
(1)39W T6 / (1)150W T6
(1)70W T6 / (1)150W T6
(2)150W T6
(1)150W ED17
(1)210W T9
(1)250W T15 PS
(1)250W T15 CMH
(1)315W T9
(1)320W T15 PS
(1)350W T15 PS
(1)400W ED18 CMH
(2)400W ED18 CMH
(1)250W ED28 PS
(1)400W ED28 PS
(2)400W ED28 PS
(1)1000W BT37 or T25 PS
M156
M130
M130
M139
M139
M130 / M139
M139
M102 or 142
M130 / M102 or 142
M139 / M102 or 142
M102 or 142
M142
C183
M138
S50
C182
M132
M131
S51
S51
M138
M135
M135
M141
Ballast
Type
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Magnetic CWA
Magnetic CWA
Electronic
Magnetic CWA
Magnetic CWA
Magnetic CWA
Magnetic CWA
Magnetic CWA
Magnetic CWA
Magnetic CWA
Magnetic CWA
* Advance Electronic Ballast available. Contact factory for details.
** MH800, MP800 lamping requires 2 ballasts per fixture.
*** Wire must be UL3321/AWM, UL3071/SEW-2 or SF-2. Contact factory for longer remote distance up to 50'.
OVERALL NOTES:
1. When installing more than one ballast in a common area, a minimum 12" spacing
between ballast enclosures.
More space may be required dependent on ambient temperature within environment.
2. Provide ventilation in the area where ballasts are installed.
3.
4.
5.
6.
Mount away from heat generating devices and ductwork.
Use 90ºC rated wire for supply connections.
A separate 1/2" metal conduit must be used between each fixture and remote ballast.
Knock-out locations may vary from those shown above.
Winona Lighting • 3760 West Fourth Street • Winona, MN 55987 • 800.328.5291 • www.winonalighting.com
© 2015 Acuity Brands Lighting, Inc. All Rights Reserved. “Winona” is a registered trademark of Acuity Brands Lighting. Products herein
may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
Rev. 07/23/15
LS11_MH
2