10 V Precision
Voltage Reference
REF01
FEATURES
10 V Output, ⴞ0.3% Max
Adjustment Range, ⴞ3% Min
Excellent Temperature Stability, 8.5 ppm/ⴗC Max
Low Noise, 30 ␮V p-p Max
Low Supply Current, 1.4 mA Max
Wide Input Voltage Range, 12 V to 40 V
High Load Driving Capability, 10 mA
No External Components
Short Circuit Proof
PIN CONFIGURATIONS
TO-99 (J-Suffix)
8-Lead PDIP (P-Suffix)
8-Lead CERDIP (Z-Suffix)
8-Lead SOIC (S-Suffix)
NC
8
NC 1
7
VIN 2
NC
6
5
TRIM
4
7
5
TRIM
NC = NO CONNECT*
NC = NO CONNECT*
The REF01 precision voltage reference provides a stable 10 V
output that can be adjusted over a 3% range with minimal effect
on temperature stability. Single-supply operation over an input
voltage range of 12 V to 40 V, a low current drain of 1 mA, and
excellent temperature stability are achieved with an improved
band gap design. Low cost, low noise, and low power make the
REF01 an excellent choice whenever a stable voltage reference is
required. Applications include DACs and ADCs, portable instrumentation, and digital voltmeters. Full military temperature
range devices with screening to MIL-STD-883 are available.
For new designs, refer to ADR01.
REF01
GND 4
GROUND
(CASE)
GENERAL DESCRIPTION
NC
NC
TOP VIEW
NC 3 (Not to Scale) 6 VOUT
VIN 2
NC 3
8
NC 1
VOUT
*NC = No Connect. Do not connect anything on these pins as some of them are
reserved for factory testing purposes.
SIMPLIFIED SCHEMATIC
INPUT
R7
R8
2
R14
Q15
Q7
Q8
Q14
R15
Q13
Q18
Q9
Q12
Q16
Q11
C1
Q10
R6
R3
Q6
Q19
Q21
Q17
Q5
OUTPUT
6
R13
R4
R12
Q4
R5
Q1
Q2
Q3
Q20
R9
16.7k⍀
50k⍀
TRIM
1.23V
5
R1
R10
R11
2k⍀
R2
GROUND
4
REV. D
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties that
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
www.analog.com
Fax: 781/326-8703
© 2003 Analog Devices, Inc. All rights reserved.
REF01–SPECIFICATIONS
ELECTRICAL SPECIFICATIONS (@ V
IN
= 15 V, TA = 25C, unless otherwise noted.)
Parameter
Symbol
Conditions
Output Voltage
Output Adjustment Range
Output Voltage Noise1
Line Regulation2
Load Regulation2
Turn-On Settling Time3
Quiescent Supply Current
Load Current
Sink Current4
Short Circuit Current
VO
VTRIM
en p-p
IL = 0 mA
RP = 10 kW
0.1 Hz to 10 Hz
VIN = 13 V to 33 V
IL = 0 mA to 10 mA
To ±0.1% of Final Value
No Load
tON
ISY
IL
IS
ISC
REF01A/REF01E
Min
Typ
Max
Min
9.97
± 3.0
9.95
± 3.0
10
–0.3
VO = 0
10.00
± 3.3
20
0.006
0.005
5
1.0
10.03
30
0.010
0.008
1.4
10
–0.3
–0.5
30
REF01H
Typ
Max
10.00
± 3.3
20
0.006
0.006
5
1.0
10.05
30
0.010
0.010
1.4
–0.5
30
Unit
V
%
mV p-p
%/V
%/mA
ms
mA
mA
mA
mA
(@ VIN = 15 V, –55C TA +125C for REF01A/REF01E, and 0C TA 70C for REF01H and
ELECTRICAL SPECIFICATIONS I = 0 mA, unless otherwise noted.)
L
Parameter
Symbol
Output Voltage Change
VOT
with Temperature5, 6
Output Voltage
TCVO
Temperature Coefficient7
Change in VO Temperature
Coefficient with Output
Adjustment
Line Regulation
(VIN = 13 V to 33 V)2
Load Regulation
(IL = 0 mA to 8 mA)2
Conditions
REF01A/REF01E
Min
Typ
Max
0∞C TA 70∞C
–55∞C TA +125∞C
0.02
0.06
3.0
RP = 10 kW
0.7
0∞C TA 70∞C
–55∞C TA +125∞C
0∞C TA 70∞C
–55∞C TA +125∞C
0.007
0.009
0.006
0.007
ELECTRICAL SPECIFICATIONS (@ V
IN
0.06
0.15
8.5
REF01H
Typ
Max
0.07
0.18
10.0
0.17
0.45
25.0
0.7
0.012
0.015
0.010
0.012
0.007
0.009
0.007
0.009
Unit
%
%
ppm/∞C
ppm/%
0.012
0.015
0.012
0.015
%/V
%/mA
= 15 V, TA = 25C, unless otherwise noted.)
Parameter
Symbol
Conditions
Output Voltage
Output Adjustment Range
Output Voltage Noise1
Line Regulation2
Load Regulation2
Turn-On Settling Time3
Quiescent Supply Current
Load Current
Sink Current4
Short Circuit Current
VO
VTRIM
en p-p
IL = 0 mA
9.90
RP = 10 kW
± 2.7
0.1 Hz to 10 Hz
VIN = 13 V to 33 V
IL = 0 mA to 8 mA
To ±0.1% of Final Value
No Load
8
–0.3
VO = 0
tON
ISY
IL
IS
ISC
Min
Min
–2–
REF01C
Typ
Max
10.00
± 3.3
25
0.009
0.006
5
1.0
–0.5
30
10.10
35
0.015
0.015
1.6
Unit
V
%
mV p-p
%/V
%/mA
ms
mA
mA
mA
mA
REV. D
REF01
(@ VIN = 15 V, 0C TA 70C for REF01CJ, REF01CZ, and
ELECTRICAL SPECIFICATIONS –40C T +85C for REF01CP and REF01CS, unless otherwise noted.)
A
Parameter
Symbol
Conditions
Output Voltage Change
VOT
with Temperature5, 6
Output Voltage
TCVO
Temperature Coefficient7
Change in VO Temperature
Coefficient with Output
Adjustment
Line Regulation2
Load Regulation2
Min
RP = 10 kW
VIN = 13 V to 30 V
IL = 0 to 5 mV
REF01C
Typ
Max
Unit
0.14
0.45
%
20
65
ppm/∞C
0.7
0.011
0.008
0.018
0.018
ppm/∞C
%/V
%/mA
NOTES
1
Sample tested.
2
Line and load regulation specifications include the effect of self-heating.
3
Guaranteed by design.
4
During sink current test the device meets the output voltage specified.
5
VOT is defined as the absolute difference between the maximum output voltage and the minimum output voltage over the specified temperature range expressed as a
percentage of 10 V:
DVOT =
6
7
V MAX – V MIN
10 V
¥ 100
+18V
VOT specification applies trimmed to +10,000 V or untrimmed.
TCVO is defined as Var divided by the temperature range, i.e.
TCVO (0∞C to + 70∞C ) =
DVOT (0∞C to + 70∞C )
TCVO (– 55∞C to + 125∞C ) =
70∞C
VIN
and
REF01
DVOT (– 55∞C to + 125∞C )
180∞C
GND
Specifications subject to change without notice.
–18V
Figure 2. Burn-In Circuit
The REF01 trim terminal can be used to adjust the output voltage
over a 10 V ± 300 mV range. This feature allows the system designer
to trim system errors by setting the reference to a voltage other than
10 V. Of course, the output can also be set to exactly 10.000 V or
to 10.240 V for binary applications.
15V
2
VIN
VO
6
OUTPUT
REF01
TRIM
5
Adjustment of the output does not significantly affect the temperature performance of the device. The temperature coefficient change
is approximately 0.7 ppm/∞C for 100 mV of output adjustment.
10k
GND
4
Figure 1. Output Adjustment
REV. D
–3–
REF01
ABSOLUTE MAXIMUM RATINGS 1, 2
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 V
Output Short Circuit Duration
(to Ground or VIN) . . . . . . . . . . . . . . . . . . . . . . . . Indefinite
Storage Temperature Range
J, S, and Z Packages . . . . . . . . . . . . . . . . . –65∞C to +150∞C
P Package . . . . . . . . . . . . . . . . . . . . . . . . . –65∞C to +125∞C
Operating Temperature Range
REF01A . . . . . . . . . . . . . . . . . . . . . . . . . . –55∞C to +125∞C
REF01CJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0∞C to 70∞C
REF01CP, REF01CS, REF01E, REF01H . . . –40∞C to +85∞C
Junction Temperature (TJ) . . . . . . . . . . . . . –65∞C to +150∞C
Lead Temperature (Soldering @ 60 sec) . . . . . . . . . . . . 300∞C
Package Type
␪JA*
␪JC
Unit
TO-99 (J)
8-Lead CERDIP (Z)
8-Lead PDIP (P)
8-Pin SOIC (S)
170
162
110
160
24
26
50
44
∞C/W
∞C/W
∞C/W
∞C/W
*␪JA is specified for worst-case mounting conditions, i.e., ␪JA is
specified for device in socket for TO, CERDIP, and PDIP packages;
␪JA is specified for device soldered to printed circuit board for
SOIC package.
NOTES
1
Absolute maximum ratings apply to both DICE and packaged parts, unless
otherwise noted.
2
Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
ORDERING GUIDE1
Model
TA = 25ⴗC
⌬VOS Max
(mV)
Operating
Temperature Range
(ⴗC)
Package
Description
Package
Option
REF01EJ
REF01CJ
REF01AZ2
REF01EZ
REF01HZ
REF01CP
REF01HP
REF01HS3
REF01HS-REEL
REF01CS3
REF01CS-REEL
REF01CS-REEL7
REF01AJ/883C2
REF01AZ/883C2
± 30
± 100
± 30
± 30
± 50
± 100
± 50
± 50
± 50
± 100
± 100
± 100
± 30
± 30
–40 to +85
0 to 70
–55 to +125
–40 to +85
–40 to +85
–40 to +85
–40 to +85
–40 to +85
–40 to +85
–40 to +85
–40 to +85
–40 to +85
–55 to +125
–55 to +125
TO-99
TO-99
CERDIP
CERDIP
CERDIP
PDIP
PDIP
SOIC
SOIC
SOIC
SOIC
SOIC
TO-99
CERDIP
J-8
J-8
Z-8
Z-8
Z-8
P-8
P-8
R-8
R-8
R-8
R-8
R-8
J-8
Z-8
NOTES
1
Burn-in is available on commercial and industrial temperature range parts in CERDIP, PDIP, and TO-can packages.
2
For devices processed in total compliance to MIL-STD-883, add 883 after part number. Consult factory for 883 data sheet.
3
For availability and burn-in information on SOIC package, contact your local sales office.
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although the
REF01 features proprietary ESD protection circuitry, permanent damage may occur on devices
subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended
to avoid performance degradation or loss of functionality.
–4–
REV. D
Typical Performance Characteristics–REF01
0.0100
56
0.0310
46
0.1000
36
0.3100
1.0000
26
VIN = 15V
TA = 25 C
0
10
1,000
100
3.1000
100
1k
10k
100k
FREQUENCY – Hz
10
10
10.000
1M
TPC 1. Line Regulation vs. Frequency
30
25
LOAD REG – T/LOAD REG – 25 C
MAXIMUM LOAD CURRENT – mA
0.020
0.015
0.010
0.005
500mW MAXIMUM
DISSIPATION
20
15
10
5
15
20
25
INPUT VOLTAGE – V
30
TPC 4. Maximum Load Current
vs. Input Voltage
1.3
1.2
1.1
1.0
0.9
0.8
5
0
–60 –40 –20
0 20 40 60 80 100 120 140
TEMPERATURE – C
TPC 7. Maximum Load Current
vs. Temperature
20
30
TIME – s
40
50
60
TPC 3. Output Change due
to Thermal Shock
1.3
1.2
1.1
1.0
0.9
0.8
0.6
–60 –40 –20 0 20 40 60 80 100 120 140
TEMPERATURE – C
0.6
–60 –40 –20 0 20 40 60 80 100 120 140
TEMPERATURE – C
VIN = 15V
QUIESCENT CURRENT – mA
10
10
0.7
1.3
15
0
0.7
VIN = 15V
20
DEVICE IMMERSED
IN 75ⴗC OIL BATH
1.4
TPC 5. Normalized Load Regulation
(⌬IL = 10 mA) vs. Temperature
30
25
0
–10
1M
VIN = 15V
TA = 25 C
MAXIMUM LOAD CURRENT – mA
VIN = 15V
0.025 T = 25ⴗC, T = 75ⴗC
A
A
1.4
SHORT CIRCUIT PROTECTION
REV. D
1k
10k
100k
FREQUENCY – Hz
0.030
TPC 2. Output Wideband Noise vs.
Bandwidth (0.1 Hz to Frequency
Indicated)
35
0
10
100
0.035
LINE REG – T/LINE REG – 25 C
16
VIN = 15V
TA = 25 C
OUTPUT NOISE – ␮V p-p
66
PERCENT CHANGE IN OUTPUT VOLTAGE – %
10,000
0.0031
LINE REGULATION – %/V
LINE REGULATION – dB
76
1.2
1.1
1.0
0.9
0.8
0.7
–60 –40 –20 0 20 40 60 80 100 120 140
TEMPERATURE – C
TPC 8. Quiescent Current vs.
Temperature
–5–
TPC 6. Normalized Line
Regulation vs. Temperature
REF01
+15V
2
VIN
10k
+15V
LSB
MSB
0.1F
5.0k
VIN
0.1F
6
VO
REF01
4
lO
2
5
3
16
13
lO
DAC08
5k
–15V
–15V
B1 B2 B3 B4 B5 B6 B7 B8
POS. FULL SCALE –1LSB
1
1
1
1
1
1
1
1
+4.960
ZERO SCALE
1
0
0
0
0
0
0
0
0.000
NEG. FULL SCALE +1LSB
0
0
0
0
0
0
0
1
–4.960
NEG. FULL SCALE
0
0
0
0
0
0
0
0
–5.000
3
2
lO
4
2
8
CMP01C
7
4
1
5 6 7 8 9 10 1112 1
1k
–15V
7
14 13 12 11 6 5 4 3
1
SERIAL
OUTPUT
E
5.000k
3.9M
14
B1
B2
B3
B4
B5
B6
B7
B8
5.0k
+15V
CC
5k
15
EO
OP02
VLC
CC
V–
V+
GND
4
REF01
4
5.0k B1 B2 B3 B4 B5 B6 B7 B8
lO
DAC08
5
VO
+15V
0.01F
6
GND TRIM
+15V
2
ANALOG
INPUT
0 TO +10V
–15V +15V
10
START
AM2592
SUCCESSIVEAPPROXIMATION
REGISTER
9
2
CONVERSION
COMPLETE
Figure 3. DAC Reference
CONNECT START TO
CONVERSION COMPLETE
FOR CONTINUOUS
CONVERSIONS
TTL CLOCK
INPUT 2.25MHz
Figure 6. ADC Reference
+15V
2
VIN
1.1mA
REF01
VIN
10k 0.1%
5
TRIM
GND
2
9V
+10V
VO 6
VO
4
+
6
10k 0.1%
+15V
0.1F
0.1F
REF01
9V
TRIM
GND
–10V
5
100k
10.000V
OP02
5k
4
–
–15V
Figure 7. ± 10 V Reference
Figure 4. Precision Calibration Standard
VOLTAGE COMPLIANCE: –25V TO +3V
15V
VOLTAGE COMPLIANCE: –3V TO +25V
IOUT
2
2
VIN
VO
VIN
6
VO
REF01
TRIM
5
R
IOUT =
6
REF01
10V
+ 1mA
R
TRIM
GND
5
R
IOUT =
10V
+ 1mA
R
GND
4
4
IOUT
–15V
Figure 8. Current Sink
Figure 5. Current Source
–6–
REV. D
REF01
REFERENCE STACK WITH EXCELLENT
LINE REGULATION
PRECISION CURRENT SOURCE
A current source with 25 V output compliance and excellent
output impedance can be obtained using this circuit. REF01 keeps
the line voltage and power dissipation constant in the device; the
only important error consideration at room temperature is the
negative supply rejection of the op amp. The typical 3 mV/V PSRR
of the OP02E will create an 8 ppm change (3 mV/V 25 V/10 V)
in output current over a 25 V range. For example, a 10 mA current
source can be built (R = 1 kW) with 300 MW output impedance.
RO =
Three REF01s can be stacked to yield 10.000 V, 20.000 V, and
30.000 V outputs. An additional advantage is near-perfect line
regulation of the 10.0 V and 20.0 V output. A 32 V to 60 V input
change produces an output change that is less than the noise
voltage of the devices. A load bypass resistor (RB) provides a
path for the supply current (ISY) of the 20.000 V regulator.
In general, any number of REF01s can be stacked this way. For
example, 10 devices will yield outputs of 10 V, 20 V, 30 V . . .
100 V. The line voltage can change from 105 V to 130 V. However, care must be taken to ensure that the total load currents do
not exceed the maximum usable current (typically 21 mA).
25 V
8 ¥ 10-6 ¥ 10 mA
+50V
32V TO 60V
2
6
VO
VIN
TRIMMED
OUTPUTS
2
VIN
REF01
30.000V
VO 6
REF01
GND
VIN
TRIM
4
2
VO
5
10k
GND
6
4
2
REF01
C
R
(TRIM FOR
CALIBRATION)
VIN
6
20.000V
REF01
GND
4
R
TRIM
GND
2
C
VIN
7
6
OP02E
2
3
VO
6
5
4
TRIM
5
10k
GND
4
–5V
10k
10.000V
REF01
VO = 0
TO +25V
4
RC = 10–5 SEC
IO = +10V
R
Figure 10. Reference Stack
Figure 9. Precision Current Source
SUPPLY BYPASSING
For best results, it is recommended that the power supply pin is
bypassed with a 0.1 mF disc ceramic capacitor.
REV. D
VO
–7–
RB
6.8k
REF01
OUTLINE DIMENSIONS
8-Lead Ceramic Dual In-Line Package [CERDIP]
Z-Suffix
(Q-8)
8-Lead Metal Can [TO-99]
J-Suffix
(H-08B)
Dimensions shown in inches and (millimeters)
Dimensions shown in inches and (millimeters)
0.055 (1.40)
MAX
0.005 (0.13)
MIN
8
REFERENCE PLANE
0.1850 (4.70)
0.1650 (4.19)
5
0.310 (7.87)
0.220 (5.59)
PIN 1
1
0.2500 (6.35) MIN
0.1000 (2.54) BSC
4
0.3700 (9.40)
0.3350 (8.51)
0.3350 (8.51)
0.3050 (7.75)
5
0.320 (8.13)
0.290 (7.37)
0.405 (10.29) MAX
0.060 (1.52)
0.015 (0.38)
0.200 (5.08)
MAX
0.150 (3.81)
MIN
0.200 (5.08)
0.125 (3.18)
0.1600 (4.06)
0.1400 (3.56)
0.0500 (1.27) MAX
0.100 (2.54) BSC
SEATING
0.070 (1.78) PLANE
0.030 (0.76)
0.023 (0.58)
0.014 (0.36)
0.5000 (12.70)
MIN
0.2000
(5.08)
BSC
15
0
3
7
2
0.1000
(2.54)
BSC
0.0190 (0.48)
0.0160 (0.41)
0.0400 (1.02) MAX
0.0400 (1.02)
0.0100 (0.25)
0.015 (0.38)
0.008 (0.20)
6
4
0.0210 (0.53)
0.0160 (0.41)
0.0450 (1.14)
0.0270 (0.69)
8
1
0.0340 (0.86)
0.0280 (0.71)
45 BSC
BASE & SEATING PLANE
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETERS DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN
COMPLIANT TO JEDEC STANDARDS MO-002AK
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETERS DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN
8-Lead Standard Small Outline Package [SOIC]
Narrow Body
S-Suffix
(R-8)
8-Lead Plastic Dual In-Line Package [PDIP]
P-Suffix
(N-8)
Dimensions shown in inches and (millimeters)
Dimensions shown in millimeters and (inches)
0.375 (9.53)
0.365 (9.27)
0.355 (9.02)
5.00 (0.1968)
4.80 (0.1890)
4.00 (0.1574)
3.80 (0.1497)
8
5
1
4
1.27 (0.0500)
BSC
0.25 (0.0098)
0.10 (0.0040)
COPLANARITY
SEATING
0.10
PLANE
6.20 (0.2440)
5.80 (0.2284)
1.75 (0.0688)
1.35 (0.0532)
0.51 (0.0201)
0.31 (0.0122)
8
5
1
4
0.295 (7.49)
0.285 (7.24)
0.275 (6.98)
0.325 (8.26)
0.310 (7.87)
0.300 (7.62)
0.100 (2.54)
BSC
0.50 (0.0196)
ⴛ 45ⴗ
0.25 (0.0099)
0.180
(4.57)
MAX
8ⴗ
0.25 (0.0098) 0ⴗ 1.27 (0.0500)
0.40 (0.0157)
0.17 (0.0067)
0.150 (3.81)
0.130 (3.30)
0.110 (2.79)
0.022 (0.56)
0.018 (0.46)
0.014 (0.36)
COMPLIANT TO JEDEC STANDARDS MS-012AA
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN
0.015
(0.38)
MIN
SEATING
PLANE
0.060 (1.52)
0.050 (1.27)
0.045 (1.14)
0.150 (3.81)
0.135 (3.43)
0.120 (3.05)
0.015 (0.38)
0.010 (0.25)
0.008 (0.20)
COMPLIANT TO JEDEC STANDARDS MO-095AA
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETER DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN
–8–
REV. D
REF01
Revision History
Location
Page
10/03—Data Sheet changed from REV. C to REV. D.
Changes to FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Changes to ELECTRICAL SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Deleted Figure 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Deleted WAFER TEST LIMITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Deleted TYPICAL ELECTRICAL CHARACTERISTICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Changes to ORDERING GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Updated OUTLINE DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
10/02—Data Sheet changed from REV. B to REV. C.
Edits to FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Delete RC-SUFFIX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Edits to ABSOLUTE MAXIMUM RATINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Edits to ORDERING GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Edits to Package Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Delete CP-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Updated OUTLINE DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
REV. D
–9–
–10–
–11–
–12–
C00373–0–10/03(D)