Technical Data
Effective September 19, 2014
AIM – Automation Interface Module
Catalog#
Prepared by
Project
Date
Comments
Type
Overview
The Automation Interface Module is the solution to interface
a lighting control system to various HVAC industry standard
communication protocols.
Features
Seamless system integration
BACnet protocol
Johnson Controls N2 protocol
LonWorks protocol
Modbus protocol
Communication LEDs for system diagnostics
Technical Data 
September 2014
Specifications
Enclosure Size
Power
Operating
Environment
3.5”H x 2.5”W x 1”D
120 VAC
Temperature: 32°F to 122°F (0°C to 50°C)
Description/Operation
The Automation Interface Module (AIM) supports all of the
commonly employed building automation communication protocol
standards including BACnet, LonWorks, Johnson Controls N2 and
more. The AIM unit permits data sharing between building control
systems for effortless building control integration.
Installation
The AIM connects to the panel network or directly via RS-232
connection. When connected, the AIM unit becomes an addressable
node on the network. Direct connection would be employed for
stand-alone controller applications.
Wiring Diagram
2
www.coopercontrol.com
AIM – Automation Interface Module


Technical Data 
AIM – Automation Interface Module


September 2014
Ordering
All Automation Interface Modules require a Logic Board (AIM
OEMPRTL). The logic board is shipped separately from the enclosure
and is listed as a separate line item. When ordering any of the below
models, you must also order the AIM OEMPRTL (required with each
AIM-*-*). When ordering specify BAS protocol and panel interface.
See next/back page for Ordering details.
AIM B NW
Product
Installation Type
AIM = Automation Interface Module
NW = Network (ControlKeeper Family)
SA = Stand Alone (LiteKeeper 16 & 32)
Protocol Type
B =
N =
L =
M =
BACnet (1200 points)
N2 (256 points)
LON (1200 points)
Modbus (1200 points)
Additional Options
Catalog #
AIM OEMPRTL
Description
Automation Interface Module (AIM) Logic Board Required
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Controls Business
203 Cooper Circle
Peachtree City, GA 30269
coopercontrol.com
© 2014 Eaton
All Rights Reserved
Printed in USA
Publication No. ACC131632
September 19, 2014
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.