NEC's 1 Mbps, OPEN-COLLECTOR
OUTPUT FOR GATE DRIVE INTERFACE PS9613
INTELLIGENT POWER MODULE PS9613L
8-PIN DIP PHOTOCOUPLER
FEATURES
DESCRIPTION
• HIGH INSTANTANEOUS COMMON MODE
REJECTION VOLTAGE
CMH, CML = ±15 kV/µs MIN
NEC's PS9613 and PS9613L are optically coupled isolator
containing a GaAIAs LED on the input side and a photo diode
and a signal processing circuit on the output side on one chip.
• HIGH SPEED RESPONSE
tPHL= 500 ns MAX, tPLH = 750 ns MAX
The PS9613 is in a plastic DIP (Dual In-line Package) and the
PS9613L is lead bending type (Gull-wing) for surface
mounting.
• MAXIMUM PROPAGATION DELAYS
tPHL- tPLH = 270 ns TYP
• PULSE WIDTH DISTORTION
| tPHL- tPLH | = 270 ns TYP
APPLICATIONS
• TAPING PRODUCT NUMBER
PS9613L-E3, E4: 1000 pcs/reel
• IPM DRIVER
• GENERAL PURPOSE INVERTER
ESD SENSITIVE
ELECTRICAL CHARACTERISTICS1 (TA = -40 to +100°C, VCC = 15 V, unless otherwise specified)
PART NUMBER
Coupled
Detector
Diode
SYMBOL
PARAMETERS
PS9613, PS9613L
UNITS
MIN
TYP
1.3
1.65
MAX
VF
Forward Voltage, IF = 10 mA
V
IR
Reverse Current, VR = 3 V
µA
2.1
Ct
Terminal Capacitance, V = 0, f = 1 MHz, TA = 25 ºC
pF
30
VOL
Low Level Output Voltage
IF = 10 mA, Vcc = 5 V, IO = 2.4 mA
V
0.13
0.6
IOH
High Level Output Current
Vcc = 30 V, VF = 0.8 V
µA
1.0
50
ICCH
High Level Supply Current, VCC = 30 V, VF = 0.8 V, V0 = open
mA
0.6
1.3
ICCL
Low Level Supply Current, VCC = 30 V, IF = 10 mA, V0 = open
mA
0.6
1.3
IFHL
Threshhold Input Current (High→ Low),
VO = 0.8 V, Io = 0.75 V
mA
1.5
5.0
CTR
Current Transfer Ratio, IF = 10 mA, Vo = 0.6 V
200
%
44
1011
110
RI-O
Isolation Resistance, VI-O = 1 k VDC, RH = 40 to 60%, TA = 25 ºC
Ω
CI-O
Isolation Capacitance, V = 0, f = 1 MHz, TA = 25 ºC
pF
0.6
tPHL
Propagation Delay Time2, High → Low
IF = 10 mA, RL = 20 kΩ, CL = 100 pF, VTHHL = 1.5 V, VTHLH = 2.0 V
ns
250
500
tPLH
Propagation Delay Time2, High → Low
IF = 10 mA, RL = 20 kΩ, CL = 100 pF, VTHHL = 1.5 V, VTHLH = 2.0 V
ns
520
750
tPLH-tPHL
Maximum Propagation Delays
IF = 10 mA, RL = 20 kΩ, CL = 100 pF, VTHHL = 1.5 V, VTHLH = 2.0 V
ns
270
650
| tPHL-tPLH |
Pulse Width Distortion
IF = 10 mA, RL = 20 kΩ, CL = 100 pF, VTHHL = 1.5 V, VTHLH = 2.0 V
ns
270
650
-200
CMH
Instantaneous Common Mode Rejection Voltage (Output:High)3
TA = 25°C, IF = 0 mA,VO > = 3.0 V, VCM = 1.5 kV, RL = 20 Ω,
CL = 100 pF
kV/µs
15
CML
Instantaneous Common Mode Rejection Voltage (Output:High)3
TA = 25°C, IF = 10 mA,VO <) = 1.0 V, VCM = 1.5 kV, RL = 20 Ω,
CL = 100 pF
kV/µs
15
Notes: See Next Page
California Eastern Laboratories
PS9613, PS9613L
Notes:
1. Typical values at TA = 25 ºC
2. Test Circuit for Propagation delay time
IF = (ON)
Input
50 % IF = (ON)
VCC = 15 V
IF = 10 mA
0V
Pulse Input
0.01
µF
PW = 10 µs
(Duty
Cycle = 1/10)
RL = 20 Ω
5V
Output
VO = Monitor
CL 100 pF
Input
(Monitor)
VTHHL = 1.5 V
VTHLH = 2.0 V
VOL
47 Ω
tPHL
tPLH
*CL is approximately 15 pF, which includes probe and stray wiring capacitance.
3. Test circuit for common mode transient immunity
B
1.5 kV
VCM 90%
GLL SW IF
VCC = 15 V
0.01
µF
A
10%
0V
RL = 20 Ω
tr
VO = Monitor
CL 100 pF
tf
VO
(Switch A: IF = 0 mA)
15 V
3.0 V
VO
(Switch B: IF = 10 mA)
VOL
1.0 V
VCM
*CL is approximately 15 pF, which includes probe and stray wiring capacitance.
ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C)
SYMBOLS
Diode
IF
VR
Detector
VCC
VO
IO
PC
Coupler
BV
TOP
TSTG
PARAMETERS
UNITS
RATINGS
Forward Current
Reverse Voltage
mA
V
25
3.0
Supply Voltage
Output Voltage
Output Current
Power Dissipation
V
V
mA
mW
-0.5 to +35
-0.5 to +35
15
100
Vr.m.s.
°C
°C
5000
-40 to +100
-55 to +125
Isolation Voltage2
Operating Temperature
Storage Temperature
Notes:
1. Operation in excess of any one of these parameters may result
in permanent damage.
2. AC voltage for 1 minute at TA = 25 °C, RH = 60% between input
and output.
OUTLINE DIMENSIONS (Units in mm)
PS9613, PS9613L
10.16 MAX
8
7
6
5
1
2
3
4
1. NC
2. Anode
3. Cahode
4. NC
5. GND
6. VO
7. NC
8.VCC
7.62
6.5
3.8 MAX
4.55 MAX
2.8 MIN
0.65
1.27 MAX
1.25–0.15
0 to 15ß
0.50–0.10
10.16 MAX
RECOMMENDED
OPERATING CONDITIONS
6
5
1
2
3
4
1. NC
2. Anode
3. Cahode
4. NC
5. GND
6. VO
7. NC
8.VCC
PS9716
UNITS MIN TYP MAX
mA
10
20
V
0
30
V
4.5
30
V
0
0.8
6.5
1.25±0.15
0.9±0.25
2.54
9.60±0.4
0.05 to 0.2
PARAMETERS
High Level Input Current
Output Voltage
Supply Voltage
LED off Voltage
7
3.8 MAX
PART NUMBER
SYMBOLS
IFH
Vo
VCC
VF
8
PS9613, PS9613L
FUNCTIONAL DIAGRAM
PS9613, PS9613L
8
2
6
3
5
Shield
LED
OUTPUT
ON
L
OFF
H
TYPICAL PERFORMANCE CURVES
(TA = 25°C, unless otherwise specified)
MAXIMUM FORWARD CURRENT vs.
AMBIENT TEMPERATURE
DETECTPR POWER DISSIPATION vs.
AMBIENT TEMPERATURE
20
10
0
20
40
60
80
100
Forward Current, IF (mA)
150
100
50
0
40
20
80
60
Ambient Temperature, TA (ºC)
Ambient Temperature, TA (ºC)
FORWARD CURRENT vs.
FORWARD VOLTAGE
SUPPLY CURRENT vs.
AMBIENT TEMPERATURE
100
10
TA = +85 ºC
+50 ºC
+25 ºC
0 ºC
-25 ºC
1
0.1
0.01
1.0
Detector Power Dissipation, PC (mW)
30
1.2
1.4
1.6
1.8
2.0
2.2
2.4
Forward Voltage, VF (V)
Remarks: The graphs indicate nominal characteristics.
High Level Supply Current, ICCH (µA),
Low Level Supply Current, ICCL (µA)
Maximum Forward Current, IF (mA)
40
100
1200
VCC = 30 V,
VO = Open,
ICCH : F = 0.8 V,
ICCL : IF = 10 mA
1000
800
ICCL
600
ICCH
400
200
0
–50
–25
0
25
50
75
Ambient Temperature, TA (ºC)
100
PS9613, PS9613L
TYPICAL PERFORMANCE CURVES
(TA = 25°C, unless otherwise specified)
LOW LEVEL OUTPPUT VOLTAGE vs.
AMBIENT TEMPERATURE
THRESHOLD INPUT CURRENT
vs. AMBIENT TEMPERATURE
0.6
4
3
2
1
0
–50
–25
0
25
50
75
100
8
+100 ºC
6
–40 ºC
4
2
5
10
15
20
Output Current (Relative Value)
Output Current, IO (mA)
0.1
0
–50
1.10
VO = 0.6 V
0
0
Propagation Delay Time, tPHL, tPLH (ns)
Maximum Propagtion Delays tPLH – tPHL (ns)
0.2
–25
25
0
50
75
OUTPUT CURRENT vs.
AMBIENT TEMPERATURE
TA = +25 ºC
100
IF = 10 mA
1.05 VO = 0.6 V
1.00
0.95
0.90
0.85
0.80
0.75
0.70
–40
–20
0
20
40
60
80
Forward Current, IF (mA)
Ambient Temperature, TA (ºC)
PROPAGATION DELAY TIME,
MAXIMUM PROPAGATION DELAYS
vs. SUPPLY VOLTAGE
PROPAGATION DELAY TIME,
MAXIMUM PROPAGATION DELAYS
vs. SUPPLY VOLTAGE
VCC = 15 V,
600 CL = 100 pF,
RL = 20 kΩ
500
tPLH
400
tPHL
tPLH – tPHL
100
0
0
0.3
OUTPUT CURRENT vs.
FORWARD CURRENT
10
200
0.4
Ambient Temperature, TA (ºC)
12
300
VCC = 15 V,
IF = 10 mA,
IO = 2.4 mA
0.5
Ambient Temperature, TA (ºC)
14
700
Low Level Output Voltage, VOL (V)
VCC = 15 V,
VO = 0.8 V,
IO = 0.75 mA
5
10
15
20
Forward Current, IF (mA)
Remarks: The graphs indicate nominal characteristics.
Propagation Delay Time, tPHL, tPLH (ns)
Maximum Propagtion Delays tPLH – tPHL (ns)
Threshold Input Current, IFHL (mA)
5
1800
100
IF = 10 mA,
CL = 100 pF,
RL = 20 kΩ
1600
1400
1200
1000
800
600
tPLH
400
200
0
–200
0
tPHL
tPLH – tPHL
10
20
30
Supply Voltage, VCC (V)
40
PS9613, PS9613L
TYPICAL PERFORMANCE CURVES
(TA = 25°C)
PROPAGATION DELAY TIME vs.
LOAD CAPACITANCE
700
Propagation Delay Time, tPHL, tPLH (ns)
Propagation Delay Time, tPHL, tPLH (ns)
Pulse Width Distortion | tPLH – tPHL | (ns)
PROPAGATION DELAY TIME,
PULSE WIDTH DISTORTION
vs. AMBIENT TEMPERATURE
600
500
tPLH
400
tPHL
300
200
PWD
IF = 10 mA,
VCC = 15 V,
CL = 100 pF,
RL = 20 kΩ
100
0
–40
0
–20
20
40
80
60
100
1600
IF = 10 mA,
1400 VCC = 15 V,
1000
800
600
200
0
0
Propagation Delay Time, tPHL, tPLH (ns)
Maximum Propagtion Delays tPLH – tPHL (ns)
Propagation Delay Time, tPHL, tPLH (ns)
Maximum Propagtion Delays tPLH – tPHL (ns)
tPLH
600
tPHL – tPLH
400
tPHL
200
0
10
20
30
40
100
200
300
50
tPLH
IF = 10 mA,
450 VCC = 5 V,
400 CL = 15 pF
350
tPHL – tPLH
300
250
200
150
tPHL
100
50
0
0
5
10
15
ORDERING INFORMATION
PS9613
PS9613L
PS9613L-E3
PS9613L-E4
PS9613-V
PS9613L-V
PS9613L-V-E3
PS9613L-V-E4
8 – pin DIP
PACKING STYLE
Magazine case 50 pcs
SAFETY STANDARDS
APPLICATION PART
NUMBER1
UL approved
PS9613
PS9613L
VDE0884 approved
PS9613
PS9613L
Embossed Tape 1000 pcs/reel
Magazine case 50 pcs
20
Load Resistance, RL (kΩ)
Remarks: The graphs indicate nominal characteristics.
PACKAGE
500
PROPAGATION DELAY TIME,
MAXIMUM PROPAGATION DELAYS
vs. LOAD RESISTANCE
500
Load Resistance, RL (kΩ)
PART NUMBER
400
Load Capacitance, CL (pF)
PROPAGATION DELAY TIME,
MAXIMUM PROPAGATION DELAYS
vs. LOAD RESISTANCE
1000
–200
0
tPHL
400
Ambient Temperature, TA (ºC)
IF = 10 mA,
VCC = 15 V,
800 CL = 100 pF
tPLH
RL = 20 kΩ
1200
Embossed Tape 1000 pcs/reel
Notes:
1. For the application of the Saftey Standard, following part number should be used.
25
PS9613, PS9613L
TAPING SPECIFICATIONS (Units in mm)
OUTLINE AND DIMENSIONS (TAPE)
10.4±0.1
0.3
φ330
10.3±0.1
2.0±0.5
φ13.0±0.5
R 1.0
φ21.0±0.8
φ80.0±5.0
1.55±0.1
4.3±0.2
16.0±0.3
7.5±0.1
1.55±0.1
1.5
1.75±0.1
2.0±0.1
4.0±0.1
OUTLINE AND DIMENSIONS (REEL)
12.0±0.1
Notes:
1. Packing : 1000 pcs/reel
TAPE DIRECTION
PS9613L-E3
PS9613L3-E4
16.4+2.0
–0.0
PS9613, PS9613L
RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering
• Peak reflow temperature
235 ˚C or below (plastic surface temperature)
• Reflow time
30 seconds or less (Time period during which the plastic surface temperature
is higher than 210 ºC
• Number of reflows Processes
Three
• Flux
Rosin flux containing small amount of chlorine (The flux
with a max. chlorine content of 0.2 Wt % is recommended.)
Package Surface Temperature T (˚C)
INFRARED RAY REFLOW TEMPERATURE PROFILE
(heating)
to 10 s
235 ˚C (peak temperature)
210 ˚C
to 30 s
100 to 160 ˚C
60 to 120 s
(preheating)
Time (s)
(2) Dip soldering
• Temperature
260 ˚C or below (molten solder temperature)
• Time
10 seconds or less
• Flux
Rosin flux containing small amount of chlorine (The flux
with a max. chlorine content of 0.2 Wt % is recommended.)
(3) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based
cleaning solvent.
Life Support Applications
These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably
be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and
agree to fully indemnify CEL for all damages resulting from such improper use or sale.
10/14/2003
A Business Partner of NEC Compound Semiconductor Devices, Ltd.