REVISIONS
L125 (M125 LED) ASSEMBLY
REV.
ECN
DESCRIPTION
DATE
C
0197.14
7/1/2014
D
0197.14
7/25/2014
AMS
E
0363.14
ADD CONNECTOR WIRING VIEW FOR DIMMING OPTION SHT 2 & 4
ADDED LIST OF ORDER CODE OPTIONS, ADDED NON-TAMPER SCREWS SHT 2, ADDED OPTIONAL END CAP, REPLACED TERMINAL BLOCK, UPDATED BRACKET,
REVISED WIRING DIAGRAMS, ADDED FEED WIRE DIAGRAMS, ADDED DCE & DC3 DRIVERS, REMOVED WIRING DIAGRMS, REMOVED 6-85056-00, 6-51011-00 SHT
4, ADDED EM/2 DRIVER OPTION SHT 7, REMOVED ADHESIVE, ADDED QUICK DISCONNECT AND RIVETS SHT 4
CHANGED STD DRIVER FROM UNIVERSAL TO ELDO ECO
REVISION
BY
S. MURPHY
F
0467.14
COMBINED 6-48A349-00 & 6-48990-00 TO ONE DRAWING; COMMONIZE TERMINAL BLOCKS & BALLAST DISCONNECT; REPLACE 6-32650-30 W/ 6-32692-30
& HEATSHRINK; ADDED MISSING ASSEMBLY NOTES & CORRECTED TYPOS & CLARIFY DETAILS WHERE REQUIRED; REPLACED 6-32688-00
W/ 6-32689-0; UPDATED GEARTRAY & MOVED DRIVERS TO 6-48A706-00
12/8/2014
LBT
G
0093.15
ADD 6-42014-00 TO ALL GROUND WIRES & REFERENCE DRAWING# NOTES FOR MOUNTING
3/23/2015
LBT
H
0127.15
4/13/2015
LBT
J
K
0165.15
0207.15
5/14/2015
6/2/2015
S.Murphy
LBT
L
0268.15
ADDED 6-34680-00 & 6-34A214-00 FOR FUSE OPTION; MOVED EM MOD DETAIL TO 6-48A56-00; CORRECTED SEVERAL REFERENCE NOTES; ADDED
LABEL REQUIREMENTS; REMOVED 6-51996-00
ADD SHEET 11 FOR EM GEAR TRAY ASSEMBLY, ADD SHEET 12 FOR EM HOUSING MODS
CLARIFIED MEDIA TRUNK DETAILS
ADDED HYPERLINKS TO REFERENCE DRAWINGS, ADDED HEATSHRINK P/NS, ADDED NOTE TO END CAPS FOR WET APPLIED SILICONE, REMOVED 6-34627-00,
REMOVED CENTER RIVET ON LBS, CLARIFIED OPTICS DIRECTION; UPDATED PCB PART #S
7/13/2015
LBT
M
0316.15
SHEET 3: CORRECTED LED LI LENS PART NUMBERS 6-51A123-00 4FT & 6-51A102-00 3FT (PNs WERE SWAPPED), & ADDED 5FT LED L1 LENS 6-51A76-00. SHEET 4:
ADDED 5FT LED GT 6-28C244-00, UPDATED PCB TABLE, CHANGED RIVET 6-43082-00 QTY TO 3 PER LB. UPDATED DESCRIPTIONS FOR 5FT LED HSG 6-11A155-00,
5FT DOOR ASM 6-11A156-00, 5FT GASKET 6-47755-00.
8/6/2015
JLM
N
0360.15
ADDED 5FT RECESSED LED HSG 6-11A342-00 SHEET 2, UPDATED 6-11A342-00'S DESCRIPTION SHEET 7, SHHET 12: ADDED EM VIEWS TO CLARIFY MILLING,
INCREASED MILLING
9/2/2015
JLM
(SERIES)-(LIGHT ENGINE)-(CCT)-(SHIELDING)-(MOUNTING)-(LENGTH)-(FINISH)-(VOLTAGE)-(OPTIONS)
SERIES:
•
L125 - M125 LED
LIGHT ENGINE:
•
1L35/1A35 - SINGLE LINEAR ROW DRIVEN AT 350mA
•
1L30/1A30 - SINGLE LINEAR ROW DRIVEN AT 300mA
•
1L25/1A25 - SINGLE LINEAR ROW DRIVEN AT 250mA
•
1L20/1A20 - SINGLE LINEAR ROW DRIVEN AT 200mA
•
2L35/2A35 - DOUBLE LINEAR ROW DRIVEN AT 350mA
•
2L30/2A30 - DOUBLE LINEAR ROW DRIVEN AT 300mA
•
2L25/2A25 - DOUBLE LINEAR ROW DRIVEN AT 250mA
•
2L20/2A20 - DOUBLE LINEAR ROW DRIVEN AT 200mA
CCT:
•
27 - 2700K
•
30 - 3000K
•
35 - 3500K
•
40 - 4000K
SHIELDING:
•
MI - CLEAR LENS W/MICROPRISMATIC INLAY
•
SD - SATINE LENS
•
PC - POLYCARBONATE PRISMATIC SATINE LENS
•
LI - CLEAR GLASS W/LED OPTIMIZED INLAY
MOUNTING: (REFER TO 6-48A56-00) **CLICK HERE FOR DRAWING**
•
F - SURFACE MOUNT
•
TS - 1" THREADED STUD
•
RS - RIGID STEM MOUNT
•
W - WALL MOUNT
•
MTB - CONCRETE METAL POUR BOX
•
RC - ROTATING CROSSBAR
•
SH - SUSPENSION BRACKET
•
PM - PERIMETER MOUNT
NOMINAL LENGTH:
•
003 - 3 FT
•
004 - 4 FT
•
RUN
FINISH:
•
WH - WHITE
•
BK - BLACK
•
SV - SILVER
•
SP - SPECIFY PREMIUM COLOR
VOLTAGE:
•
120 - 120V
•
208 - 208V
•
240 - 240V
•
277 - 277V
OPTIONS:
•
MT - MEDIA TRUNKING (REFER TO 6-48A55-00) **CLICK HERE FOR DRAWING**
•
DM - DIMMING (0-10V) LINEAR
•
DML - DIMMING (0-10V) LOGARITHMIC
•
DMD - DIGITAL ADDRESSABLE (DALI) DIMMING
•
DME - LUTRON 4-WIRE PWM DIMMING
•
DM3 - LUTRON 3-WIRE PWM DIMMING
•
DCE - LUTRON 4-WIRE CCR DIMMING
•
DC3 - LUTRON 3-WIRE CCR DIMMING
•
FS - SINGLE FUSING
•
NC - NIPPLE CONNECTOR (FOR RUNS)
•
TR - TAMPER RESISTANT DOOR SCREWS
•
TM - SEPARATE SWITCHING
•
EC - EMERGENCY WIRING
•
EFC - END FEED WITH WATERTIGHT CONNECTION
•
FOR 1/2" CONDUIT (CONDUIT SUPPLIED BY OTHERS)
FOR GEART RAY ASSEMBLY
SEE SHEET 4
FOR DOOR ASSEMBLY
SEE SHEET 3
FOR HOUSING ASSEMBLY
SEE SHEET 2
FOR MOUNTING DETAILS SEE DRAWING #:
G 6-48A56-00 M125 MOUNTING DETAIL STANDARDS **CLICK HERE FOR DRAWING**
R
DWG SIZE
C
STATUS:
Light. Ideas. Systems
P.O. BOX 1060
5 LUMEN LANE
HIGHLAND, NY 12528
845-691-7723
TOLERANCES UNLESS OTHERWISE NOTED:
L125 - M125 LED ASSEMBLY
-RELEASED-
PROJECT #:
L125
MATERIAL:
FINISH:
THIS DRAWING IS THE PROPERTY OF SELUX CORPORATION AND IS
PROTECTED BY COPYRIGHT LAW. IT MAY ONLY BE COPIED OR
REPRODUCED WITH PRIOR, WRITTEN AUTHORIZATION FOR THE
PURPOSE OF MANUFACTURING AND/OR SUBMISSION FOR SELUX
CORPORATION.
SCALE:
DATE:
1:24
8/27/2010
DECIMAL INCH:
.X .030"
.XX .015"
.XXX .005"
DECIMAL METRIC:
X. 1.0
X.X .50
X.XX .10
FRACTIONS: 1/32 [.79mm]
DRAWN BY:
RAJ
DWG. #:
ANGULAR:
1 1/2
6-48A349-00
APPR.
CK'D.
SHEET
1OF 12
REV.
N
LED BASE ASSEMBLY
GLUE AT EACH CORNER
6-47728-00
HEAT TRANSFER PAD WITH ADHESIVE FOR L125
(QTY 1x) PER DME/DM3 OPTION ONLY
6-41057-00
M4x8 PH PAN HD. MACH.SCREW
(QTY 1x)
6-41966-00
M3x20 PH OVAL HEAD MACH SCREW SS
QTY 2 PER TERMINAL BLOCK
6-27194-00
M125 CLIP FOR DOOR TETHER
(QTY 2x)
6-51A124-00
STRAIN RELIEF BLACK 0.437"
(QTY 1x)
6-34198-00
TERM BLOCK,3POLE,PUSH-IN
QTY 2
6-41057-00
M4x8 PH PAN HD. MACH.SCREW
(QTY 2x)
6-59789-00
HEAT SHIELD FOR L125
(QTY 1x) PER DME/DM3 OPTION ONLY
6-28B691-00
M125 TERMINAL BLOCK MOUNTING BRACKET
(QTY 1x)
APPLY SILICONE
AT GASKET SPLICE
6-32689-00
SAFETY CABLE - 8" S.S. WITH # 10 LUGS
(QTY 2x)
6-34679-00
BALLAST DISC - 2 POLE
6 CONNECT UL2459
QTY 1
6-41137-09
8-32 x 3/8 PHILLIPS SELF TAP SCREW, TYPE 23
(QTY 2x)
**DO NOT OVER TIGHTEN.
SAFETY CABLE SHOULD STILL BE ABLE TO MOVE**
6-42593-00
CARDANIC SHEET METAL BALLAST BOX CORDGRIP
(QTY 1x PER FEED)
(QTY 2x PER FIXTURE FOR RUN OPTION WITH M.T.)
NONE REQD. FOR RUN OPTION WITH N.C. EXCEPT FEED SECTION
6-41057-00
M4x8 PH PAN HD. MACH.SCREW
(QTY 1x)
6-32606-48
18" GROUND WIRE w/#10 LUG
(QTY 1x)
OTHER COMPONENTS
6-73066-00 : DOW CORNING 737 NEUTRAL CURE SILICONE
(QTY AS REQD.)
SEE WIRING DIAGRAM FOR APPROPRIATE CORD PER
OPTION
6-34586-00 : 2 WIRE, LEVER WIRE NUT
(QTY 4x)
6-42014-00
#8 EXT. TOOTH STAR LOCK WASH, SS
(QTY 1x)
7-47065-00
M125 GASKET FOR HOUSING
(QTY AS REQUIRED)
7-26169-00
M125 END CAP FOR HOUSING
OR
7-26173-00
M125 END CAP FOR HOUSING W/ FLANGE
(QTY 2x)
OR
6-26A082-00
M125 END CAP - SIDE FEED
(QTY 1x FOR EFC OPTION)
(QTY 2 FOR RUNS)
**APPLY SILICONE BEAD
TO END CAP AND
ATTACH WHILE WET**
USE ONE OF THE FOLLOWING:
6-11A155-00 : M125 HOUSING - T8/LED 5FT M
6-11A134-00 : M125 HOUSING - T8/LED 4FT
6-11A137-00 : M125 HOUSING - T8/LED 3FT
6-11A173-00 : M125 FLANGED HOUSING - T8/LED 4FT
6-11A174-00 : M125 FLANGED HOUSING - T8/LED 3FT
6-11A342-00 : M125 FLANGED HOUSING - T8/LED 5FT
(QTY 1x)
N
PLEASE SEE DRIVER TABLE ON 6-48A706-00 "M125 BALLAST TABLES & WIRING SCHEMATICS"
**CLICK HERE FOR DRAWING**
6-28B425-00
L125 UNIVERSAL BALLAST MOUNTING BRACKET
(QTY 2x) PER DRIVER FOR ECO DRIVERS
(QTY 2x) PER PAIR OF DRIVERS FOR LUTRON
& SOLO DRIVER
6-41057-00
M4x8 PH PAN HD. MACH.SCREW
(QTY 2x) PER BALLAST/GEARTRAY MOUNTING BRACKET
INSTRUCTIONS
1. PLEASE MAKE SURE TO GREASE HOUSING END CAPS AND DOOR SCREW BEFORE SECURING THEM.
2. PLEASE JOIN THE HOUSING GASKET IN THE MIDDLE OF LENGTH AND NOT AROUND CORNERS FOR
CLEANER JOINT. ALSO APPLY CRAZY GLUE AROUND CORNERS (VERY LITTLE) TO SECURE GASKET FIRMLY.
3.PLEASE MAKE SURE TO SECURE DOOR CLIP ON THE INSIDE HOLE OF DOOR AND INLINE OF END CAP (NOT
ACROSS)
4.PLEASE CLEAN EXTRA SILICONE AROUND END CAPS OF HOUSING.
5.PLEASE APPLY LOCTITE ON SCREW WHEN SECURING SAFETY CABLE WITH END CAP.
6.PLEASE CLEAN GLASS AND INLAY SURFACE THOROUGHLY BEFORE EVERY DOOR ASSEMBLY.
7.PLEASE PUSH M6 PUSH NUT ALL THE WAY DOWN ON THE DOOR END CAP FOR SECURE CAPTIVE PURPOSES.
8.WHEN USED WITH INSTANT START SOCKETS, APPLY 2" OF WHITE HEAT SHRINK TUBING TO WIRES.
R
6-41A050-00
M5 x 30 PIN PUTTON HEX SOCKET
(QTY 4x)
OR
6-41886-00
M5 x 30 PIN BUTTON HEX SOCKET
(QTY 4x)
TR OPTION
DWG SIZE
-RELEASED-
PROJECT #:
L125
MATERIAL:
FINISH:
THIS DRAWING IS THE PROPERTY OF SELUX CORPORATION AND IS
PROTECTED BY COPYRIGHT LAW. IT MAY ONLY BE COPIED OR
REPRODUCED WITH PRIOR, WRITTEN AUTHORIZATION FOR THE
PURPOSE OF MANUFACTURING AND/OR SUBMISSION FOR SELUX
CORPORATION.
TOLERANCES UNLESS OTHERWISE NOTED:
L125 - M125 LED ASSEMBLY
C
STATUS:
Light. Ideas. Systems
P.O. BOX 1060
5 LUMEN LANE
HIGHLAND, NY 12528
845-691-7723
SCALE:
DATE:
1:24
8/27/2010
DECIMAL INCH:
.X .030"
.XX .015"
.XXX .005"
DECIMAL METRIC:
X. 1.0
X.X .50
X.XX .10
FRACTIONS: 1/32 [.79mm]
DRAWN BY:
RAJ
DWG. #:
ANGULAR:
1 1/2
6-48A349-00
APPR.
CK'D.
SHEET
2OF 12
REV.
N
FLOURESCENT & LED DOOR ASSEMBLY
6-41123-00
M6x20 SOC HD CAP SCREW
(QTY 2x)
OR
6-41909-00
M6 x 20 PIN BUTTON HEX SOCKET SCREW
(QTY 2x FOR TR OPTION)
USE ONE OF THE FOLLOWING:
6-11A156-00 : M125 DOOR - T8/LED 5FT
6-11A135-00 : M125 DOOR - T8/LED 4FT
6-11A140-00 : M125 DOOR - T8/LED 3FT
6-11A141-00 : M125 DOOR - T5 4FT
6-11A142-00 : M125 DOOR - T5 3FT
(QTY 2x)
7-26170-00
M125 END CAP FOR DOOR
(QTY 2x)
M
PLEASE REFER TO SHIELDING OPTIONS TABLE
**NOTE TEXTURED SURFACE TO FACE OUT,
SMOOTH SIDE TO FACE LIGHT SOURCE**
USE ONE OF THE FOLLOWING:
6-47755-00 : M125 GASKET FOR DOOR - T8/LED 5FT
M
7-47066-00 : M125 GASKET FOR DOOR - T8/LED 4FT
7-47068-00 : M125 GASKET FOR DOOR - T5 4FT
7-47069-00 : M125 GASKET FOR DOOR - T5/T8/LED 3FT
(QTY 1x)
LENGTH
LI
M
MI
PC
SD
XX
SI
3FT
T8/LED
OI
PLEASE REFER TO SHIELDING OPTION TABLE
**NOTE TEXTURED SURFACE TO FACE OUT,
SMOOTH SIDE TO FACE LIGHT SOURCE**
LI
M
MI
PC
SD
XX
SI
4FT
T8/LED
6-41823-00
M4 X 16MM PH. FLAT HD. SCREW
(QTY 4x)
OI
6-40192-09
M6 PUSH NUT
(QTY 2x)
M
LI
5FT
T8/LED
SI
PC
SD
XX
SI
4FT
T5
OI
MI
PC
SD
XX
SI
3FT
T5
R
DWG SIZE
C
STATUS:
Light. Ideas. Systems
OI
MI
PC
SD
PROJECT #:
L125
MATERIAL:
FINISH:
PART # QTY
M125 CLEAR GLASS - T8 3FT
L125 LED INLAY (LI) T8 3FT
M125 CLEAR GLASS - T8 3FT
M125 MICROPRISMATIC INLAY - T8 3FT
M125 POLYCARBONATE LENS - T8 3FT
M125 SATINE LENS PLASTIC - T8 3FT
M125 CLEAR GLASS - T8 3FT
M125 CLEAR GLASS - T8 3FT
M125 SATINE INLAY - T8 3FT
M125 CLEAR GLASS - T8 3FT
M125 OPAL INLAY - T8 3FT
M125 CLEAR GLASS - T8 4FT
L125 LED INLAY (LI) T8 4 FT
M125 CLEAR GLASS - T8 4FT
M125 MICROPRISMATIC INLAY - T8 4FT
M125 POLYCARBONATE LENS - T8 4FT
M125 SATINE LENS PLASTIC - T8 4FT
M125 CLEAR GLASS - T8 4FT
M125 CLEAR GLASS - T8 4FT
M125 SATINE INLAY - T8 4FT
M125 CLEAR GLASS - T8 4FT
M125 OPAL INLAY - T8 4FT
M125 CLEAR GLASS - T8 5FT
L125 LED INLAY (LI) T8 5FT
M125 CLEAR GLASS - T8 5FT
M125 SATINE INLAY - T8 5FT
M125 POLYCARBONATE LENS - T8 5FT
M125 SATINE LENS (PLASTIC) T8 5FT
M125 CLEAR GLASS - T5 4FT
M125 CLEAR GLASS - T5 4FT
M125 SATINE INLAY - T5 4FT
M125 CLEAR GLASS - T5 4FT
M125 OPAL INLAY - T5 4FT
M125 CLEAR GLASS - T5 4FT
M125 MICROPRISMATIC INLAY - T5 4FT
M125 POLYCARBONATE LENS - T5 4FT
M125 SATINE LENS PLASTIC - T5 4FT
M125 CLEAR GLASS - T5 3FT
M125 CLEAR GLASS - T5 3FT
M125 SATINE INLAY - T5 3FT
M125 CLEAR GLASS - T5 3FT
M125 OPAL INLAY - T5 3FT
M125 CLEAR GLASS - T5 3FT
M125 MICROPRISMATIC INLAY - T5 3FT
M125 POLYCARBONATE LENS - T5 3FT
M125 SATINE LENS PLASTIC - T5 3FT
P.O. BOX 1060
5 LUMEN LANE
HIGHLAND, NY 12528
845-691-7723
6-52171-00
6-51A102-00
6-52171-00
6-51A036-00
6-51A033-00
6-51A052-00
6-52171-00
6-52171-00
6-51A042-00
6-52171-00
6-51A029-00
6-52170-00
6-51A123-00
6-52170-00
6-51A031-00
6-51A32-00
6-51A045-00
6-52170-00
6-52170-00
6-51A024-00
6-52170-00
6-51A025-00
6-52184-00
6-51A763-00
6-52184-00
6-51A670-00
6-51A038-00
6-51A064-00
6-52172-00
6-52172-00
6-51A041-00
6-52172-00
6-51A040-00
6-52172-00
6-51A037-00
6-51A034-00
6-51A053-00
6-52173-00
6-52173-00
6-51A027-00
6-52173-00
6-51A039-00
6-52173-00
6-51A026-00
6-51A035-00
6-51A054-00
SCALE:
DATE:
1:24
8/27/2010
DECIMAL INCH:
.X .030"
.XX .015"
.XXX .005"
DECIMAL METRIC:
X. 1.0
X.X .50
X.XX .10
FRACTIONS: 1/32 [.79mm]
DRAWN BY:
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
THIS DRAWING IS THE PROPERTY OF SELUX CORPORATION AND IS
PROTECTED BY COPYRIGHT LAW. IT MAY ONLY BE COPIED OR
REPRODUCED WITH PRIOR, WRITTEN AUTHORIZATION FOR THE
PURPOSE OF MANUFACTURING AND/OR SUBMISSION FOR SELUX
CORPORATION.
TOLERANCES UNLESS OTHERWISE NOTED:
L125 - M125 LED ASSEMBLY
-RELEASED-
SHIELDING OPTION /
DESCRIPTION
SHIELDING
RAJ
DWG. #:
ANGULAR:
1 1/2
6-48A349-00
APPR.
CK'D.
SHEET
3OF 12
REV.
N
6-40066-09
#8-32 KEPS NUT
(QTY 1x)
LED GEAR TRAY ASSEMBLY
6-32606-48
18" GROUND WIRE w/#10 LUG
(QTY 1x)
6-42014-00
#8 EXT. TOOTH STAR LOCK WASH, SS
(QTY 1x)
6-41519-00
M4x6 PHILIPS PAN HEAD SCREW, SS
(QTY 4x)
6-28B562-00
L125 1L/2L 4FT GEARTRAY
OR
6-28B564-00
L125 1L/2L 3FT GEARTRAY - LOW SIDE
(QTY 1x)
OR
6-28C244-00
L125 1L/2L 5FT GEARTRAY - LOW SIDE
(QTY 1x)
OTHER COMPONENTS
M
6-34097-00 : 3 PORT PUSH IN WIRE CONNECTOR, (QTY 3x)
6-32703-30 : 24GA BLACK STRANDED WIRE, (QTY 3x)
6-32703-44 : 24GA RED STRANDED WIRE, (QTY 3x)
6-34679-00 : BALLAST DISC - 2 POLE 6 CONNECT UL2459 (QTY 1x)
6-43082-00: 1/8" SNAP RIVET WH .079-.118" THK HOLD
M (QTY 3 PER LONG BOARD)
(QTY 1 PER SHORT BOARD)
.092
2.3
.966
24.5
.000
0.0
**BOARDS SHOWN FOR REFERENCE ONLY, SEE WIRING DIAGRAMS ON 6-48A706-00 "M125 BALLAST TABLES & WIRING SCHEMATICS" FOR PROPER ORIENTATION**
**CLICK HERE FOR DRAWING**
APPLY THE FOLLOWING LABELS:
SALES ORDER / SYM # LABEL (M/F 6-475A21-00 2.75"x0.375" CLEAR THERMAL LABEL)
LAMPING LABEL (M/F 6-475A21-00 2.75"x0.375" CLEAR THERMAL LABEL)
M
6-51011-00
WIRE TIE WRAP
1-75054-48
2" GREEN POLY TAPE X 1" LONG
NOTE
** NO WIRES OR WIRE DEVICES IN AREA ABOVE DRIVERS**
1-75054-48
2" GREEN POLY TAPE X 1" LONG
R
Light. Ideas. Systems
P.O. BOX 1060
5 LUMEN LANE
HIGHLAND, NY 12528
845-691-7723
TOLERANCES UNLESS OTHERWISE NOTED:
DWG SIZE
C
STATUS:
THIS DRAWING IS THE PROPERTY OF SELUX CORPORATION AND IS
PROTECTED BY COPYRIGHT LAW. IT MAY ONLY BE COPIED OR
REPRODUCED WITH PRIOR, WRITTEN AUTHORIZATION FOR THE
PURPOSE OF MANUFACTURING AND/OR SUBMISSION FOR SELUX
CORPORATION.
L125 - M125 LED ASSEMBLY
-RELEASED-
PROJECT #:
L125
MATERIAL:
FINISH:
SCALE:
DATE:
1:24
8/27/2010
DECIMAL INCH:
.X .030"
.XX .015"
.XXX .005"
DECIMAL METRIC:
X. 1.0
X.X .50
X.XX .10
FRACTIONS: 1/32 [.79mm]
DRAWN BY:
RAJ
DWG. #:
ANGULAR:
1 1/2
6-48A349-00
APPR.
CK'D.
SHEET
4OF 12
REV.
N
DAISY CHAIN EXAMPLE
LED FEED LINE WIRING DIAGRAMS
GRN
USED THE FOLLOWING 18GA SOLID WIRE FOR JUMPER WIRES WHERE REQUIRED BELOW:
GRN
6-32607-20 18GA SOLID WIRE WHITE
6-32607-30 18GA SOLID WIRE BLACK
6-32607-48 18GA SOLID WIRE GREEN
6-32607-44 18GA SOLID WIRE RED
6-32607-26 18GA SOLID WIRE GRAY
6-32607-52 18GA SOLID WIRE VIOLET/PURP
6-32607-53 18GA SOLID WIRE VIOLET/WHTE STRIPE
WHT
WHT
BLK
APPROX 10" JUMPER WIRES
GRN
GRN
GRN
BLK
WHT
BLK
BLK
DRIVER/
BALLAST
BLK
GRN
BLK
OPTIONAL
FUSE
WHT
GRN
GRN
BLK
GRY(-)
GRN
GRN
PUR (+)
WHT
WHT
BLK
BLK
DRIVER/
BALLAST
BLK
GRY(-)
WHT
GRY(-)
RED (+)
PUR
APPROX 10" JUMPER WIRES
APPROX 6" JUMPER WIRES
GRY(-)
PUR (+)
WHT
WHT
OPTIONAL
FUSE
BLK
ORG (-)
ORG (-)
FEED LINE
RED (+)
RED (+)
APPROX 10" JUMPER WIRES
APPROX 6" JUMPER WIRES
VLT
RED
DRIVER/
BALLAST
6-34586-00
2 WIRE, LEVER WIRE NUT
QTY 2 PER DRIVER
BLK
VLT/WHT
6-34679-00
BALLAST DISC - 2 POLE 6 CONNECT UL2459
QTY 1 PER DRIVER
GRN
GRN
GRN
GRN
GRN
WHT
WHT
OPTIONAL BLK
FUSE
BLK
RED
RED
APPROX 3" JUMPER WIRES
6-34586-00
2 WIRE, LEVER WIRE NUT
QTY 2 PER DRIVER
RED
WHT
DRIVER/
BALLAST
BLK
BLK
RED
6-34679-00
BALLAST DISC - 2 POLE 6 CONNECT UL2459
QTY 1 PER DRIVER
WHT
BLK
WHT
BLK
LINE CORD
6-32692-30
18/5C VNTC CORD BLACK 90°C 600V 0.338"
QTY 6FT
**APPLY 2INCH OF HEATSHRINK INDICATED TO BOTH SIDES OF CORD**
APPROX 3" JUMPER WIRES
GRN
WHT
BLK
GRN
RED
SECOND DRIVER IF REQ'D
SEE 6-48A706-00
L
WHT
GRN
DRIVER/
BALLAST
BLK
PUR (+)
FEED LINE
GRN
GRN
BLK
RED
LINE CORD
6-32305-30
18-3 SEOOW BLACK CORD 105°C 600V
QTY 6FT
GRN
DRIVER/
BALLAST
GRN
6-34198-00
TERM BLOCK,3POLE,PUSH-IN
QTY 2
6-34198-00
TERM BLOCK,3POLE,PUSH-IN
QTY 2
RED
6-34679-00
BALLAST DISC - 2 POLE 6 CONNECT UL2459
QTY 1 PER DRIVER
120/208/240/277V (DM3/DC3)
120/208/240/277V (DME/DCE)
6-34586-00
2 WIRE, LEVER WIRE NUT
QTY 2 PER DRIVER
BLK
ORG (-)
RED (+)
APPROX 3" JUMPER WIRES
GRN
WHT
BLK
FEED LINE
BLK
BLK
SECOND DRIVER IF REQ'D
SEE 6-48A706-00
WHT
GRN
WHT
RED
6-34679-00
BALLAST DISC - 2 POLE 6 CONNECT UL2459
QTY 1 PER DRIVER
WHT
WHT
6-34586-00
2 WIRE, LEVER WIRE NUT
QTY 2 PER DRIVER
ORG (-)
WHT
APPROX 3" JUMPER WIRES
BLK
APPROX 6" JUMPER WIRES
GRN
GRN
OPTIONAL
FUSE
APPROX 10" JUMPER WIRES
BLUE (WHT HEATSHRINK,6-85056-00)
FEED LINE
6-34198-00
TERM BLOCK,3POLE,PUSH-IN
QTY 2
BLUE (WHT HEATSHRINK,6-85056-00)
APPROX 6" JUMPER WIRES
6-34198-00
TERM BLOCK,3POLE,PUSH-IN
QTY 2
120/208/240/277V STANDARD (STD)
YELLOW (GRN HEATSHRINK, 6-85054-00)
120/208/240/277V DIMMING (DM/DML/DMD)
YELLOW (GRN HEATSHRINK, 6-85054-00)
FEED LINE
6-34380-00 15A 500V IN-LINE 1/4x1-1/4IN FUSE HOLDER QTY 1
6-34A214-00 1/4x1-1/4IN FUSE 500V 8A TIME DELAY QTY 1
BLK
GRN
WHT
BLK
GRN
WHT
BLK
FOR FUSE OPTION USE:
GRN
BLK
WHT
RED
BLK
RED
DRIVER/
BALLAST
BLK
RED
FEED LINE
BLK
LINE CORD
6-32650-30
18-4 SOOW CORD BLACK 90°C 600V
QTY 6FT
BLK
GRN
VLT
WHT
RED
VLT
BLK
DRIVER/ BLK
BALLAST
VLT/WHT
VLT
VLT/WHT
VLT/WHT
LINE CORD
SECOND
6-32692-30
18/5C VNTC CORD BLACK 90°C 600V 0.338"
QTY 6FT
**APPLY 2INCH OF HEATSHRINK INDICATED TO BOTH SIDES OF CORD**
DRIVER IF REQ'D
SEE 6-48A706-00
R
5 LUMEN LANE
P.O. BOX 1060
HIGHLAND, NY 12528
SECOND DRIVER IF REQ'D
SEE 6-48A706-00
T (845) 691-7723
F (845) 691-6749
THIS DRAWING IS THE PROPERTY OF SELUX CORPORATION AND IS
PROTECTED BY COPYRIGHT LAW. IT MAY ONLY BE COPIED OR
REPRODUCED WITH PRIOR, WRITTEN AUTHORIZATION FOR THE
PURPOSE OF MANUFACTURING AND/OR SUBMISSION FOR SELUX
CORPORATION.
TOLERANCES UNLESS OTHERWISE NOTED:
DWG SIZE
C
STATUS:
MATERIAL:
PROJECT #:
FINISH:
SCALE:
DATE:
1:2
8/27/2010
DECIMAL INCH:
DECIMAL METRIC:
.XX .02"
.XXX .010"
X.X .5
X.XX .25
FRACTIONS: 1/32 [.79mm]
DRAWN BY:
RAJ
DWG. #:
ANGULAR:
1 1/2
6-48A349-00
APPR.
CK'D.
SHEET
5OF 12
REV.
N
M125 FLOURESCENT ASSEMBLY
(SERIES)-(LAMPING)-(SHIELDING)-(MOUNTING)-(LENGTH)-(FINISH)-(VOLTAGE)-(OPTIONS)
SERIES:
•
M125
LAMPING:
•
1T5
•
2T5
•
1T8
•
2T8
SHIELDING:
•
MI - CLEAR LENS W/MICROPRISMATIC INLAY
•
SD - SATINE LENS
•
PC - POLYCARBONATE PRISMATIC SATINE LENS
•
SI - CLEAR GLASS W/SATINE INLAY
•
OI - CLEAR GLASS W/ OPAL INLAY
MOUNTING: (REFER TO 6-48A56-00) **CLICK HERE FOR DRAWING**
•
F - SURFACE MOUNT
•
TS - 1" THREADED STUD
•
RS - RIGID STEM MOUNT
•
W - WALL MOUNT
•
MTB - CONCRETE METAL POUR BOX
•
RC - ROTATING CROSSBAR
•
SH - SUSPENSION BRACKET
•
PM - PERIMETER MOUNT
NOMINAL LENGTH:
•
003 - 3 FT
•
004 - 4 FT
•
RUN
FINISH:
•
WH - WHITE
•
BK - BLACK
•
SV - SILVER
•
SP - SPECIFY PREMIUM COLOR
VOLTAGE:
•
120 - 120V
•
277 - 277V
•
347 - 347V
OPTIONS:
•
MT - MEDIA TRUNKING (REFER TO 6-48A55-00) **CLICK HERE FOR DRAWING**
•
EM1 - STAND-BY BATTERY PACK (ISL-28)
•
EM2 - STAND-BY BATTERY PACK (ISL-54)
•
EM3 - STAND-BY BATTERY PACK (ISL-540)
•
DM - NON-STANDARD BALLAST
•
DMA - LUTRON: ECOSYSTEM (4-WIRE DIGITAL LINK)
•
DMH - LUTRON: ECOSYSTEM H-SERIES (4-WIRE DIGITAL LINK)
•
DM3 - LUTRON: HI-LUME 3D (3-WIRE DIMMING)
•
DM4 - LUTRON: HI-LUME 3D (4-WIRE DIMMING)
•
DM7 - ADVANCE: MARK 7 (0-10V) DIMMING
•
DM10 - ADVANCE: MARK 10 (2-WIRE) DIMMING
•
CW - COLD WEATHER BALLAST
•
FS - SINGLE FUSING
•
NC - NIPPLE CONNECTOR (FOR RUNS)
•
TR - TAMPER RESISTANT DOOR SCREWS
•
TM - SEPARATE SWITCHING
•
EC - EMERGENCY WIRING
•
EFC - END FEED WITH WATERTIGHT CONNECTION
•
FOR 1/2" CONDUIT (CONDUIT SUPPLIED BY OTHERS)
FOR DOOR ASSEMBLY
SEE SHEET 3
FOR GEARTRAY ASSEMBLY
SEE SHEET 9
FOR HOUSING ASSEMBLY
SEE SHEET 8
NOTES:
1.
R
DWG SIZE
C
STATUS:
Light. Ideas. Systems
FOR REQUIRED MODS & MOUNTING DETAILS:
6-48A56-00 "M125 MOUNTING DETAIL STANDARDS"
**CLICK HERE FOR DRAWING**
6-48A55-00 "M125 MOUNTS WITH MEDIA TRUNK OPTION"
**CLICK HERE FOR DRAWING**
P.O. BOX 1060
5 LUMEN LANE
HIGHLAND, NY 12528
845-691-7723
TOLERANCES UNLESS OTHERWISE NOTED:
M125 ASSEMBLY
-RELEASED-
PROJECT #:
M125
THIS DRAWING IS THE PROPERTY OF SELUX CORPORATION AND IS
PROTECTED BY COPYRIGHT LAW. IT MAY ONLY BE COPIED OR
REPRODUCED WITH PRIOR, WRITTEN AUTHORIZATION FOR THE
PURPOSE OF MANUFACTURING AND/OR SUBMISSION FOR SELUX
CORPORATION.
MATERIAL:
FINISH:
SCALE:
DATE:
1:24
8/27/2010
DECIMAL INCH:
.X .030"
.XX .015"
.XXX .005"
DECIMAL METRIC:
X. 1.0
X.X .50
X.XX .10
FRACTIONS: 1/32 [.79mm]
DRAWN BY:
RAJ
DWG. #:
ANGULAR:
1 1/2
6-48A349-00
APPR.
CK'D.
SHEET
6OF 12
REV.
N
FLOURESCENT BASE ASSEMBLY
6-41966-00
M3x20 PH OVAL HEAD MACH SCREW SS
(QTY 4x)
6-34198-00
TERM BLOCK,3POLE,PUSH-IN
(QTY 2x)
GLUE AT EACH CORNER
6-27194-00
M125 CLIP FOR DOOR TETHER
(QTY 2x)
6-41057-00
M4x8 PH PAN HD. MACH.SCREW
(QTY 1x)
6-51A124-00
STRAIN RELIEF BLACK 0.437"
(QTY 1x)
6-28B691-00
M125 TERMINAL BLOCK MOUNTING BRACKET
(QTY 1x)
5.500
139.7
6-41057-00
M4x8 PH PAN HD. MACH.SCREW
(QTY 2x)
F
APPLY SILICONE
AT GASKET SPLICE
6-34679-00
BALLAST DISC - 2 POLE
6 CONNECT UL2459
QTY 1
6-32689-00
SAFETY CABLE - 8" S.S. WITH # 10 LUGS
(QTY 2x)
6-41137-09
8-32 x 3/8 PHILLIPS SELF TAP SCREW, TYPE 23
(QTY 2x)
**DO NOT OVER TIGHTEN.
SAFETY CABLE SHOULD STILL BE ABLE TO MOVE**
6-42593-00
CARDANIC SHEET METAL BALLAST BOX CORDGRIP
(QTY 1x) STANDARD
(QTY 2x) WHEN USING MEDIA TRUNK
6-41057-00
M4x8 PH PAN HD. MACH.SCREW
(QTY 4x)
7-47065-00
M125 GASKET FOR HOUSING
(QTY AS REQUIRED)
USE ONE OF THE FOLLOWING:
6-11A155-00 : M125 HOUSING - T8/LED 5FT M
6-11A134-00 : M125 HOUSING - T8/LED 4FT
6-11A137-00 : M125 HOUSING - T8/LED 3FT
6-11A138-00 : M125 HOUSING - T5 4FT
6-11A139-00 : M125 HOUSING - T5 3FT
6-11A342-00 : M125 RECESSED HOUSING - T8/LED 5FT N
6-11A173-00 : M125 FLANGED HOUSING - T8/LED 4FT
6-11A174-00 : M125 FLANGED HOUSING - T8/LED 3FT
6-11A175-00 : M125 FLANGED HOUSING - T5 4FT
6-11A176-00 : M125 FLANGED HOUSING - T5 3FT
(QTY 1x)
INSTRUCTIONS
7-26169-00
M125 END CAP FOR HOUSING
OR
7-26173-00
M125 END CAP FOR HOUSING W/ FLANGE
(QTY 2x)
OR
6-26A082-00
M125 END CAP - SIDE FEED
(QTY 1x FOR EFC OPTION)
(QTY 2x FOR RUNS)
**APPLY SILICONE BEAD
TO END CAP AND
ATTACH WHILE WET**
L
6-41057-00
M4x8 PH PAN HD. MACH.SCREW
(QTY 2x)
6-28A607-00
M125 GEARTRAY BRACKET W/PEMNUT
(QTY 2x)
6-41057-00
M4x8 PH PAN HD. MACH.SCREW
(QTY 1x)
6-32606-48
18" GROUND WIRE w/#10 LUG
6-42014-00 (QTY 1x)
#8 EXT. TOOTH STAR LOCK WASH, SS
(QTY 1x)
6-41886-00
M5 x 30 PIN BUTTON HEX SOCKET
(QTY 4x)
OR
6-41886-00
M5x30 PIN BUTTON HEX SOCKET
(QTY 4x FOR TR OPTION)
OTHER COMPONENTS
6-73066-00 : DOW CORNING 737 NEUTRAL CURE SILICONE
(QTY AS REQUIRED)
SEE WIRING DIAGRAM FOR APPROPRIATE CORD PER
OPTION
6-51011-00 WIRE TIE
1. PLEASE USE APPROPRIATE GEARTRAY GAUGE TO SECURE GEARTRAY BRACKETS WITHIN HOUSING.
2. PLEASE MAKE SURE TO GREASE HOUSING END CAPS AND DOOR SCREW BEFORE SECURING THEM.
3. PLEASE JOIN THE HOUSING GASKET IN THE MIDDLE OF LENGTH AND NOT AROUND CORNERS FOR
CLEANER JOINT. ALSO APPLY CRAZY GLUE AROUND CORNERS (VERY LITTLE) TO SECURE GASKET FIRMLY.
4.PLEASE PLACE ALL LABELS EXACTLY BELOW THE LAMP.
5.PLEASE MAKE SURE TO SECURE DOOR CLIP ON THE INSIDE HOLE OF DOOR AND INLINE OF END CAP (NOT ACROSS)
6.PLEASE CLEAN EXTRA SILICONE AROUND END CAPS OF HOUSING.
7.PLEASE APPLY LOCTITE ON SCREW WHEN SECURING SAFETY CABLE WITH END CAP.
8.PLEASE CLEAN GLASS AND INLAY SURFACE THOROUGHLY BEFORE EVERY DOOR ASSEMBLY.
9.PLEASE PUSH M6 PUSH NUT ALL THE WAY DOWN ON THE DOOR END CAP FOR SECURE CAPTIVE PURPOSES.
10.PLEASE TIE A KNOT ON THE CORD INSIDE OF HOUSING TO MAKE IT STRAIN RELIEF.
11.WHEN USED WITH INSTANT START SOCKETS, APPLY 2" OF WHITE HEAT SHRINK TUBING TO WIRES.
R
DWG SIZE
C
STATUS:
Light. Ideas. Systems
P.O. BOX 1060
5 LUMEN LANE
HIGHLAND, NY 12528
845-691-7723
TOLERANCES UNLESS OTHERWISE NOTED:
M125 ASSEMBLY
-RELEASED-
PROJECT #:
M125
THIS DRAWING IS THE PROPERTY OF SELUX CORPORATION AND IS
PROTECTED BY COPYRIGHT LAW. IT MAY ONLY BE COPIED OR
REPRODUCED WITH PRIOR, WRITTEN AUTHORIZATION FOR THE
PURPOSE OF MANUFACTURING AND/OR SUBMISSION FOR SELUX
CORPORATION.
MATERIAL:
FINISH:
SCALE:
DATE:
1:24
8/27/2010
DECIMAL INCH:
.X .030"
.XX .015"
.XXX .005"
DECIMAL METRIC:
X. 1.0
X.X .50
X.XX .10
FRACTIONS: 1/32 [.79mm]
DRAWN BY:
RAJ
DWG. #:
ANGULAR:
1 1/2
6-48A349-00
APPR.
CK'D.
SHEET
7OF 12
REV.
N
FLOURESCENT GEARTRAY ASSEMBLY
PLEASE MAKE SURE THAT ALL THE LABELS AND MARKINGS ARE PLACED IN THIS AREA,
RIGHT BELOW THE LAMP IN THE CENTER AREA OF THE GEARTRAY
APPLY THE FOLLOWING LABELS:
6-47566-00 CSA C/US CERTIFICATION LABEL
6-475A18-00 MIN 90°C SUPPLY CONDUCTORS
6-475A16-00 BALLAST DISCONNECT
6-47631-00 SUITABLE FOR WET LOCATION LABEL
6-47634-00 MODEL LABEL
6-47575-00 LABEL, UNION MADE
COVERED CEILING LABEL (M/F 6-47544-20 2.75x1" WHITE THERMAL LABEL -40C - 149C)
6-51011-00
TIE WRAP VACO# 70412
(QTY 4x)
6-30113-00 : T8 PUSH IN SOCKET
(QTY 2x) 1T8
(QTY 4x) 2T8
OR
6-30041-00 : T5 TOMBSTONE SOCKET
(QTY 2x) 1T5
(QTY 4x) 2T5
OR
6-30120-00
**SEE NOTE #11 SHEET 2**
T8 PUSH IN INSTANT START SOCKET
(QTY 2x) 1T8
(QTY 4x) 2T8
SEE BALLAST TABLE ON
6-48A706-00
"M125 BALLAST TABLES & WIRING SCHEMATICS" **CLICK HERE FOR DRAWING**
**SEE BALLAST FOR GEARTRAY WIRING, WIRING MAY FEW PER BALLAST SUPPLIED**
6-40066-09
#8-32 KEPS NUT
(QTY 3x)
6-32606-48
18" GROUND WIRE w/#10 LUG
(QTY 1x)
6-42014-00
#8 EXT. TOOTH STAR LOCK WASH, SS
(QTY 1x)
6-28A726-00 : M125 1T8 5FT GEARTRAY
6-28A606-00 : M125 1T8 4FT GEARTRAY
6-28A636-00 : M125 1T8 3FT GEARTRAY
6-28B942-00 : M125 5FT 2T8 GEARTRAY W/SLOT
6-28A727-00 : M125 2T8 4FT GEARTRAY
6-28A728-00 : M125 2T8 3FT GEARTRAY
6-28A637-00 : M125 1T5 4FT GEARTRAY
6-28A638-00 : M125 1T5 3FT GEARTRAY
6-28A729-00 : M125 2T5 4FT GEARTRAY
6-28A666-00 : M125 2T5 3FT GEARTRAY
(QTY 1x)
OTHER COMPONENTS
6-34097-00 : 3 PORT PUSH IN WIRE CONNECTOR
(QTY 3x)
6-47566-00 : CSA RECESSED WITH MR16 LABEL SX
(QTY 1x)
R
DWG SIZE
C
STATUS:
Light. Ideas. Systems
P.O. BOX 1060
5 LUMEN LANE
HIGHLAND, NY 12528
845-691-7723
TOLERANCES UNLESS OTHERWISE NOTED:
M125 ASSEMBLY
-RELEASED-
PROJECT #:
M125
THIS DRAWING IS THE PROPERTY OF SELUX CORPORATION AND IS
PROTECTED BY COPYRIGHT LAW. IT MAY ONLY BE COPIED OR
REPRODUCED WITH PRIOR, WRITTEN AUTHORIZATION FOR THE
PURPOSE OF MANUFACTURING AND/OR SUBMISSION FOR SELUX
CORPORATION.
MATERIAL:
FINISH:
SCALE:
DATE:
1:24
8/27/2010
DECIMAL INCH:
.X .030"
.XX .015"
.XXX .005"
DECIMAL METRIC:
X. 1.0
X.X .50
X.XX .10
FRACTIONS: 1/32 [.79mm]
DRAWN BY:
RAJ
DWG. #:
ANGULAR:
1 1/2
6-48A349-00
APPR.
CK'D.
SHEET
8OF 12
REV.
N
DAISY CHAIN EXAMPLE
FLOURESCENT FEED LINE WIRING DIAGRAMS
GRN
USED THE FOLLOWING 18GA SOLID WIRE FOR JUMPER WIRES WHERE REQUIRED BELOW:
GRN
6-32607-20 18GA SOLID WIRE WHITE
6-32607-30 18GA SOLID WIRE BLACK
6-32607-48 18GA SOLID WIRE GREEN
6-32607-44 18GA SOLID WIRE RED
6-32607-26 18GA SOLID WIRE GRAY
6-32607-52 18GA SOLID WIRE VIOLET/PURP
6-32607-53 18GA SOLID WIRE VIOLET/WHTE STRIPE
WHT
WHT
BLK
GRN
GRN
GRN
BLK
6-34679-00
BALLAST DISC - 2 POLE 6 CONNECT UL2459
QTY 1 PER DRIVER
WHT
WHT
WHT
BLK
BLK
SECOND DRIVER IF REQ'D
BLK
GRN
WHT
GRN
GRN
BLK
GRY(-)
GRN
GRN
PUR (+)
WHT
WHT
OPTIONAL
FUSE
BLK
BLK
BLK
ORG (-)
GRN
GRY(-)
WHT
GRY(-)
RED (+)
RED (+)
BLK
DRIVER/
BALLAST
PUR
GRY(-)
PUR (+)
PUR (+)
LINE CORD
SECOND
6-32692-30
18/5C VNTC CORD BLACK 90°C 600V 0.338"
QTY 6FT
**APPLY 2INCH OF HEATSHRINK INDICATED TO BOTH SIDES OF CORD**
FEED LINE
DRIVER IF REQ'D
120/208/240/277V
(DME/DCE/DMH/DM4/DMA)
APPROX 10" JUMPER WIRES
GRN
WHT
WHT
WHT
ORG (-)
ORG (-)
FEED LINE
RED (+)
RED (+)
DRIVER/
BALLAST
VLT/WHT
6-34679-00
BALLAST DISC - 2 POLE 6 CONNECT UL2459
QTY 1 PER DRIVER
BLK
GRN
VLT
GRN
WHT
WHT
BLK
WHT
GRN
GRN
GRN
WHT
WHT
OPTIONAL BLK
FUSE
BLK
RED
RED
DRIVER/
BALLAST
BLK
RED
WHT
GRN
GRN
APPROX 6" JUMPER WIRES
GRN
GRN
APPROX 6" JUMPER WIRES
6-34198-00
TERM BLOCK,3POLE,PUSH-IN
QTY 2
GRN
APPROX 10" JUMPER WIRES
6-34198-00
TERM BLOCK,3POLE,PUSH-IN J
QTY 2
LINE CORD
6-32305-30
18-3 SEOOW BLACK CORD 105°C 600V
QTY 6FT
BLK
DRIVER/
BALLAST
BLK
120/208/240/277V (DM3/DC3)
OPTIONAL
FUSE
DRIVER/
BALLAST
6-34679-00
BALLAST DISC - 2 POLE 6 CONNECT UL2459
QTY 1 PER DRIVER
WHT
BLK
FEED LINE
BLK
APPROX 6" JUMPER WIRES
GRN
WHT
GRN
WHT
DRIVER/
BALLAST
ORG (-)
WHT
BLK
APPROX 6" JUMPER WIRES
GRN
GRN
OPTIONAL
FUSE
APPROX 10" JUMPER WIRES
BLUE (WHT HEATSHRINK,6-85056-00)
FEED LINE
6-34198-00
TERM BLOCK,3POLE,PUSH-IN
QTY 2
BLUE (WHT HEATSHRINK,6-85056-00)
APPROX 10" JUMPER WIRES
6-34198-00
TERM BLOCK,3POLE,PUSH-IN
QTY 2
120/208/240/277V STANDARD
(STD/DM10)
YELLOW (GRN HEATSHRINK, 6-85054-00)
120/208/240/277V DIMMING
(DML/DMD/DM7)
YELLOW (GRN HEATSHRINK, 6-85054-00)
FEED LINE
6-34380-00 15A 500V IN-LINE 1/4x1-1/4IN FUSE HOLDER QTY 1
6-34A214-00 1/4x1-1/4IN FUSE 500V 8A TIME DELAY QTY 1
BLK
GRN
WHT
BLK
GRN
WHT
BLK
FOR FUSE OPTION USE:
J
6-34679-00
BALLAST DISC - 2 POLE 6 CONNECT UL2459
QTY 1 PER DRIVER
GRN
BLK
WHT
RED
BLK
DRIVER/
BALLAST
RED
FEED LINE
BLK
BLK
GRN
VLT
WHT
VLT
BLK
VLT/WHT
VLT
VLT/WHT
VLT/WHT
LINE CORD
6-32692-30
SECOND
18/5C VNTC CORD BLACK 90°C 600V 0.338"
QTY 6FT
**APPLY 2INCH OF HEATSHRINK INDICATED TO BOTH SIDES OF CORD**
DRIVER IF REQ'D
LINE CORD
6-32650-30
18-4 SOOW CORD BLACK 90°C 600V
QTY 6FT
DRIVER/
BALLAST
R
5 LUMEN LANE
P.O. BOX 1060
HIGHLAND, NY 12528
SECOND DRIVER IF REQ'D
T (845) 691-7723
F (845) 691-6749
THIS DRAWING IS THE PROPERTY OF SELUX CORPORATION AND IS
PROTECTED BY COPYRIGHT LAW. IT MAY ONLY BE COPIED OR
REPRODUCED WITH PRIOR, WRITTEN AUTHORIZATION FOR THE
PURPOSE OF MANUFACTURING AND/OR SUBMISSION FOR SELUX
CORPORATION.
TOLERANCES UNLESS OTHERWISE NOTED:
DWG SIZE
C
STATUS:
MATERIAL:
PROJECT #:
FINISH:
SCALE:
DATE:
1:2
8/27/2010
DECIMAL INCH:
DECIMAL METRIC:
.XX .02"
.XXX .010"
X.X .5
X.XX .25
FRACTIONS: 1/32 [.79mm]
DRAWN BY:
RAJ
DWG. #:
ANGULAR:
1 1/2
6-48A349-00
APPR.
CK'D.
SHEET
9OF 12
REV.
N
MEDIA TRUNK OPTION
FOR ADDITIONAL REFERENCES SEE DRAWING #:
6-48A55-00 M125 MOUNTS WITH MEDIA TRUNK OPTION
6-28A629-00
M125 MEDIA TRUNK TOP SPLICE BAR
(QTY 1x PER JOINER)
NIPPLE CONNECTOR OPTION
**CLICK HERE FOR DRAWING**
6-41827-00
M8 X 10MM CUP POINT SOCKET SET SCREW SS
(QTY 4x PER JOINER)
M125 HOUSING EXTRUSION
(QTY AS REQUIRED)
6-47569-00
GFCI BOX MOUNTING GASKET
(QTY 1x PER JOIN)
4.921
125.0
6-41187-00
M5x16 PH PAN HD SCREW, SS
(QTY 4x PER HOUSING)
6-26A037-00
M125 HOUSING END CAP MOD FOR RUN
OR
6-26A043-00
M125 HOUSING FLANGED END CAP FOR RUN
(QTY 2x PER JOIN)
6-42636-00
.20" IDx .50"OD SEALING WASHER(#10 SCR)
(QTY 4x PER HOUSING)
6-25106-00
3/8" IP NIPPLE - 2" LONG
(QTY 2x PER JOIN)
OR
4.921
125.0
6-42632-00
.26" IDx .50"OD SEALING WASHER (1/4 SCR)
(QTY 4x PER HOUSING)
(USED WITH SURFACE MOUNT)
6-42651-00
5/8"ID x 1"OD x 1/16"THK RUBBER WASHER
(QTY 4x PER JOIN)
6-40209-00
3/8" IP x 1 1/16 " OD SQUARE x .135 THK
(QTY 4x PER JOIN)
6-42593-00
CARDANIC SHEET METAL BALLAST BOX CORDGRIP
(QTY 1x PER FEED ON MT TRUNK)
(QTY 1x PER FEED ON HOUSING)
6-11A132-00
M125 MEDIA TRUNK PROFILE - 17FT
(QTY AS REQUIRED)
SEE 6-48A55-00 FOR MOD DETAILS
**CLICK HERE FOR DRAWING**
6-11A130-00
M125 HOUSING PROFILE - 17FT
(QTY AS REQUIRED)
SEE 6-48A55-00 FOR MOD DETAILS
**CLICK HERE FOR DRAWING**
6-28A826-00
M125 END CAP FOR MEDIA TRUNK
(QTY 1x PER END)
6-41003-09
# 6 x 1/2 PHILLIPS FLAT HD SCREW, TYPE A
(QTY 4x PER END PLATE)
R
DWG SIZE
NOTE FEED HOLE LOCATIONS
HOUSING & MEDIA TRUNK
ON SAME SIDE OF FIXTURE
C
STATUS:
Light. Ideas. Systems
P.O. BOX 1060
5 LUMEN LANE
HIGHLAND, NY 12528
845-691-7723
TOLERANCES UNLESS OTHERWISE NOTED:
L125 - M125 LED ASSEMBLY
-RELEASED-
PROJECT #:
L125
MATERIAL:
FINISH:
THIS DRAWING IS THE PROPERTY OF SELUX CORPORATION AND IS
PROTECTED BY COPYRIGHT LAW. IT MAY ONLY BE COPIED OR
REPRODUCED WITH PRIOR, WRITTEN AUTHORIZATION FOR THE
PURPOSE OF MANUFACTURING AND/OR SUBMISSION FOR SELUX
CORPORATION.
SCALE:
DATE:
1:2
8/27/2010
DECIMAL INCH:
.X .030"
.XX .015"
.XXX .005"
DECIMAL METRIC:
X. 1.0
X.X .50
X.XX .10
FRACTIONS: 1/32 [.79mm]
DRAWN BY:
RAJ
DWG. #:
ANGULAR:
APPR.
CK'D.
SHEET
1 1/2 10OF 12
6-48A349-00
REV.
N
Single Fluorescent Lamp Gear Tray Assembly
6-28C178-00 M125 1T5 3FT Low Side Gear Tray for EM
Emergency
Test Button / Charge Light
**Supplied with EM**
6-28C179-00 M125 1T5 4FT Low Side Gear Tray for EM
Emergency Battery Pack
**Refer to BOM**
6-28C182-00 M125 1T8 3FT Low Side Gear Tray for EM
6-28C183-00 M125 1T8 4FT Low Side Gear Tray for EM
Ballast
**Refer to BOM**
6-28C184-00 M125 1T8 5FT Low Side Gear Tray for EM
6-40066-09
8-32 Keps Nut
QTY 5
6-32651-00
Wire Ground Teflon w/# 8 Ring Lug
DETAIL A
6-51011-00
Wire Tie Wrap
QTY 4
Typical location
**Not shown**
6-34679-00
Ballast Disconnect
2 Pole 6 Connect
DETAIL B
Double Fluorescent Lamp Gear Tray Assembly
6-30041-00 T5 Tombstone Socket
QTY 2
6-30113-00 T8 Snap-in Socket
QTY 2
6-30120-00 T8 Snap-in Instant Start Socket
QTY 2
6-28C180-00 M125 2T5 3FT Low Side Gear Tray for EM
6-28C181-00 M125 2T5 4FT Low Side Gear Tray for EM
6-28C185-00 M125 2T8 3FT Low Side Gear Tray for EM
6-28C186-00 M125 2T8 4FT Low Side Gear Tray for EM
6-28C187-00 M125 2T8 5FT Low Side Gear Tray for EM
Notes:
1. Refer to Sheet 12 for Housing mods required
for EM applications.
6-41683-00
6-32 x 1/4" Rd Ph Thread Cutting Screw
QTY 4
**ONLY REQUIRED WHEN 6-30041-00 IS USED**
6-30041-00 T5 Tombstone Socket
QTY 4
**REQUIRES 6-41683-00
QTY 1 PER SOCKET
FOR THIS SOCKET ONLY**
6-30113-00 T8 Snap-In Socket
QTY 4
6-30120-00 T8 Snap-in Instant Start Socket
QTY 4
2. Refer to EM pack supplier wiring diagram
for EM wiring.
R
DWG SIZE
DETAIL C
C
STATUS:
Light. Ideas. Systems
P.O. BOX 1060
5 LUMEN LANE
HIGHLAND, NY 12528
845-691-7723
TOLERANCES UNLESS OTHERWISE NOTED:
M125 ASSEMBLY (EM)
Released
PROJECT #:
M125
MATERIAL:
See Drawing
FINISH: NONE
THIS DRAWING IS THE PROPERTY OF SELUX CORPORATION AND IS
PROTECTED BY COPYRIGHT LAW. IT MAY ONLY BE COPIED OR
REPRODUCED WITH PRIOR, WRITTEN AUTHORIZATION FOR THE
PURPOSE OF MANUFACTURING AND/OR SUBMISSION FOR SELUX
CORPORATION.
SCALE:
DATE:
1:2
8/27/2010
DECIMAL INCH:
.X .030"
.XX .015"
.XXX .005"
DECIMAL METRIC:
X. 1.0
X.X .50
X.XX .10
FRACTIONS: 1/32 [.79mm]
DRAWN BY:
RAJ
DWG. #:
ANGULAR:
APPR.
CK'D.
SHEET
1 1/2 11OF 12
6-48A349-00
REV.
N
M125 Housing Mod for EM Applications
Housing Length
**See BOM**
Midpoint of Housing
H
K
11.00
279
M125 Housing Profile
H
N
22.00
559
N
REMOVE MATERIAL
L
AFTER
SCALE 1 : 1
BEFORE
SCALE 1 : 1
N
N
SECTION H-H
SCALE 1 : 4
.265
6.7
REMOVE
RIBS
R
DWG SIZE
C
STATUS:
Light. Ideas. Systems
P.O. BOX 1060
5 LUMEN LANE
HIGHLAND, NY 12528
845-691-7723
TOLERANCES UNLESS OTHERWISE NOTED:
M125 Housing Mod for EM
Release
PROJECT #:
M125
MATERIAL: 6063
FINISH: None
ALLOY
THIS DRAWING IS THE PROPERTY OF SELUX CORPORATION AND IS
PROTECTED BY COPYRIGHT LAW. IT MAY ONLY BE COPIED OR
REPRODUCED WITH PRIOR, WRITTEN AUTHORIZATION FOR THE
PURPOSE OF MANUFACTURING AND/OR SUBMISSION FOR SELUX
CORPORATION.
SCALE:
DATE:
1:2
8/27/2010
DECIMAL INCH:
.X .030"
.XX .015"
.XXX .005"
DECIMAL METRIC:
X. 1.0
X.X .50
X.XX .10
FRACTIONS: 1/32 [.79mm]
DRAWN BY:
RAJ
DWG. #:
ANGULAR:
APPR.
CK'D.
SHEET
1 1/2 12OF 12
6-48A349-00
REV.
N