e-Design

advertisement
KAHANE - 2016 - Sharon Kabir
Suite ABB e-Design
General features
© ABB Group
April 20, 2016 | Slide 1
e-Design
‫מבנה התוכנה‬


e-Design is the suite of the ABB tool for the electrical design

DOC - electrical calculation

CAT - product selection and quotation

PDC - switchboard design

EDS - switchboard fast configuration
EDS
PDC
Depending on the country, a different software assortment is available
© ABB Group
April 20, 2016 | Slide 2
e-Design
‫הקדמה‬

e-Design supports electrical projects from the early
design stage , up to the switchboard engineering .
EDS
© ABB Group
April 20, 2016 | Slide 3
PDC
e-Design
‫מאפיינים‬

© ABB Group
April 20, 2016 | Slide 4
e-Design is:

freeware and downloadable

continuously improved by ABB

a multilingual software

supported with a mailbox for every user
e-Design
© ABB Group
April 20, 2016 | Slide 6
e-Design
‫תאימות‬
• Just one file for all the tools: with e-Design extension
• This file is now compatible with Ekip Connect !!!
© ABB Group
April 20, 2016 | Slide 9
‫סיכום‬
e-Design

is the suite of the ABB tools for electrical design –
‫החליפה המתאימה לתכנון חשמלי‬

allows the realization of the whole project by
using a common and unique file extension –

guarantees flexibility, velocity and simplicity -

allows prompt support in case of problems -
© ABB Group
April 20, 2016 | Slide 10
‫עבודה עם קובץ אחד‬
‫גמישות ומהירות‬
‫תמיכה מלאה‬
KAHANE - 2016 –Sharon Kabir
Software DOC
General features
© ABB Group
April 20, 2016 | Slide 11
? ‫מה במצגת‬

Introduction

Products

Working with DOC

features

main functionalities

typical work-flow
© ABB Group
April 20, 2016 | Slide 12
DOC
Introduction
© ABB Group
April 20, 2016 | Slide 13
Introduction
‫מאפיינים עיקריים‬

DOC is a software for drawing, design, calculation and
sizing of Low Voltage and Medium Voltage electrical plants

The main features are
© ABB Group
April 20, 2016 | Slide 14

drawing of the single-line diagram

electrical calculation of the Medium Voltage and Low Voltage network

cables sizing

protection and switching

trip units setting

verification of the protection and coordination relations
Introduction
‫קהל יעד‬

DOC is suitable for consultants, designers, electrical engineers,
panel builders, installers

It is a complete, precise and flexible tool

It can be used by beginners and also skilled technicians
© ABB Group
April 20, 2016 | Slide 15
Introduction
e-Design suite
• DOC is included in e-Design, the suite of the ABB tools
for the electrical design
• e-Design allows complete and flexible integration
among several tools
EDS
© ABB Group
April 20, 2016 | Slide 16
PDC
Introduction
‫נקודות חוזקה‬

Short-circuit calculation according to IEC Standards

Load-flow and voltage drop quick calculation

Automatic cable sizing

Automatic devices selection based on a technical and economical
optimized solution

Easy trip unit setting

Trip units setting export to Ekip Connect

Flexibility in usage: suitable both for experts and beginners
© ABB Group
April 20, 2016 | Slide 17
DOC
‫התוכנה‬
© ABB Group
April 20, 2016 | Slide 18
Products
‫מבט כללי‬

DOC manages a wide range of ABB products

Medium Voltage products – up to 36kV

Low Voltage products - up to 1kV

Motors

Transformers

Generators
© ABB Group
April 20, 2016 | Slide 19
Products
‫מוצרי מתח גבוה‬

MV breakers – ‫מפסקי מתח גבוה‬


SF6 and vacuum circuit breakers for distribution systems up to 36kV
MV relays – ‫ממסרי הגנה‬

REF542plus/DK

PR521/DK

PR521/P (50-51) e (50-51-51N)

REF542Plus

REF610

REF601

REF615

REJ525

PR512/P (50-51) e (50-51-50N-51N)

PR512/PD
© ABB Group
April 20, 2016 | Slide 20
Products
‫מוצרי מתח גבוה‬


MV disconnectors - ‫מנתקים‬

SHS2/A

SHS2/I

SHS2/IB

SHS2/N-I

HySec

GSec
MV earth disconnectors


SHS2/E
MV disconnectors with fuses

© ABB Group
April 20, 2016 | Slide 21
SHS2/IF
Products
‫מוצרי מתח גבוה‬

MV cables – ‫כבלים למתח גבוה‬

Motors - ‫מנועים‬


M2xxx

M3xxx
Transformers- ‫שנאים‬

Oil-insulated transformers

RESIBLOC
© ABB Group
April 20, 2016 | Slide 22
Products
‫מוצרי מתח נמוך‬

Air circuit breakers
(Emax 2, New Emax, Emax X1)

Molded case circuit breakers
(Tmax, Tmax XT, Isomax)

Miniature circuit breakers
(System pro-M Compact)

residual current devices
(pro-M Compact high performance)
© ABB Group
April 20, 2016 | Slide 23
Products
‫מוצרי מתח נמוך‬

Switch disconnectors
(OT, OETL)

Fuses and fusegears
(InLine II, EasyLine, SlimLine XR, OS,
OESA, OSM, E930, E90, OFAX)
© ABB Group
April 20, 2016 | Slide 24
Products
‫מוצרי מתח נמוך‬


Protection releases – ‫הגנות מנוע‬

MS116, MS132, MS325, MS450, MS451,
MS495, MS496, MS497

MO325, MO450, MO495, MO496 , MO132
Contactors- ‫מגענים‬





A, AF
EN
ESB
E259
Thermal relays – ‫הגנות טרמיות‬


© ABB Group
April 20, 2016 | Slide 25
TAxxDU, TxxDU, TAxxSU, TxxSU
ExxDU, EF, TF, TFxxDU
Products
‫מוצרי מתח נמוך‬

Measuring instruments: - ‫אביזרי מדידה‬

Energy meters
(DAB12000, DAL12000, DAM12000,
DBB22000, DAB22001)

Multimeters
(DMTME)

Frequency meters
(FRZ-90/48)

Voltmeters
(VLM, MCV-4/7)

Amperometers
(AMT 1/5, MCA-4)

Current transformers
(CTA/5)
© ABB Group
April 20, 2016 | Slide 26
Products
‫מוצרי מתח נמוך‬

Control instruments: - ‫אביזרי פיקוד וטיימרים‬

Latching releases
(E 251-8)

Timers
(D 365)

Daylight switches
(Twilight switches 2-10000 Ix and 2-100 Ix)

Push buttons
(E217-16)

Change-over switches
(E218-16)

SPD
(T2 15)

Auxiliary transformers
(TS8/8SW)

Lamps
(E219-B)
© ABB Group
April 20, 2016 | Slide 27
DOC
‫עבודה עם התוכנה‬
© ABB Group
April 20, 2016 | Slide 28
‫‪Working with DOC‬‬
‫אשף הפרוייקט‬
‫אשף הפרוייקט עוזר בהגדרת המאפיינים הכלליים של הפרוייקט‬
‫בעזרת ‪ 5‬צעדים פשוטים‬
‫נתוני הפרוייקט ‪Project data -‬‬
‫‪‬‬
‫תקנים רלוונטיים – ‪Standards and power supply‬‬
‫‪‬‬
‫שרטוט – ‪Drawing layout‬‬
‫‪‬‬
‫נתוני מקור ההזנה – ‪Supply properties‬‬
‫‪‬‬
‫רשימת לוחות החשמל – ‪Switchboard list‬‬
‫‪‬‬
‫‪© ABB Group‬‬
‫‪April 20, 2016 | Slide 29‬‬
Working with DOC
Project wizard – ‫תקנים‬

Standard for the short
circuit currents calculation

Standard for the cable
dimensioning

Kind of power supply
© ABB Group
April 20, 2016 | Slide 30
Working with DOC
Project wizard – )‫חופשי‬/‫בחירת דף שרטוט(טבלה‬


Free drawing layout:

Flexibility (complex installations with
power sources in parallel, bus ties,
distribution rings)

Electrical data shown next to the
components
Grid layout:
© ABB Group
April 20, 2016 | Slide 31

Semplicity (radial installations)

Electrical data shown in the grid
Working with DOC
Project wizard – ‫מאפייני הרשת‬

Short circuit current or power

The power and the number of the
transformers in parallel

Rated voltage

Number of phases

Distribution system

Rated frequency
© ABB Group
April 20, 2016 | Slide 32
Working with DOC
Project wizard – ‫מאפיינים נוספים‬

Supply properties Options :

calculation of the short-circuit currents
at different times .

Customize the power supply short circuit
power factor

Define the ratio between the phase to neutral
and phase to earth short circuit current

The Store current settings as default for new
projects option makes the changes
permanent for all the next projects
© ABB Group
April 20, 2016 | Slide 33
Working with DOC
Project wizard – ‫התנגדויות לאדמה ומתחי מגע‬

Supply properties Options :

Maximum contact voltage

Grounding resistance

Maximum disconnection time
of the power supply
© ABB Group
April 20, 2016 | Slide 34
Working with DOC
Project wizard – ‫ גנרטורים‬/ ‫מערכות צפות‬

Supply properties :

Stand-alone plant

Type of generator

Generator data

Distribution system properties
© ABB Group
April 20, 2016 | Slide 35
Working with DOC
Project wizard – ‫יצירת לוחות חשמל‬
© ABB Group
April 20, 2016 | Slide 36

Name

Internal temperature

Standard for MCBs

Uimp

Segregation form

Terminals
Working with DOC
‫חלון ראשי‬
Quick toolbar
Home menu
Drawing sheet
© ABB Group
April 20, 2016 | Slide 37
Working with DOC
‫תרשים סדר העבודה‬
‫שרטוט‬
‫חד קווי‬
Possibility
to draw
using both
macros
and single
object in
the same
project
© ABB Group
April 20, 2016 | Slide 39
‫חישובים‬
‫כיון הגנות‬
Automatic
load flow
and short
circuit
calculation
and objects
selection
and sizing
Possibility
to set up trip
units in a
simple way,
verify
protection
curves and
guarantee
coordination
‫שרטוט‬
‫אביזרי‬
‫עזר‬
Possibility
to draw
auxiliary
circuits
thanks to
measurement
and control
sections
‫הנפקת‬
‫מסמכים‬
Automatic
generation of
documents
and reports
Working with DOC
Work-flow: MV single-line diagram drawing

Draw by UNISEC macros
useful for drawing standard circuits,
traditional MV switchboard columns
are available

Draw by single objects
useful for drawing peculiar circuits,
addressed to more expert users

© ABB Group
April 20, 2016 | Slide 40
It is possible to use both macros and
single object in the same project
Working with DOC
Work-flow: LV single-line diagram drawing

Low-Voltage section

Macros
5 groups of macros are available
to draw standard installations

Single objects
more useful for free drawing

© ABB Group
April 20, 2016 | Slide 41
It is possible to use both macros and
single object in the same project
Working with DOC
Work-flow: ‫עבודה עם מספר שכבות‬

The line diagram can be drawn in more pages ,
by using some of the cross-reference elements
© ABB Group
April 20, 2016 | Slide 42
Working with DOC
Work-flow: ‫חישובים‬

Verify the single-line drawing correctness (missing connections, short circuited objects,)

Calculate the electrical parameters in any point of the net

Compute the voltage drops

Compute the minimum and maximum short circuit currents

Size cables and busways

Choose the suitable protection and switching devices

Coordinate the protection devices
© ABB Group
April 20, 2016 | Slide 43
Working with DOC
Work-flow: ‫חישוב זרמי קצר‬

DOC computes the maximum and
minimum short circuit currents in each
point of the installation

Different methods and Standards are
available for the short circuit currents
calculation:

IEC 61363 - Standard for naval applications

IEC 60909-1 - international Standard

VDE 0102 - German national Standard

CEI 11-25 - Italian national Standard

NFC 15-100 -French national Standard
© ABB Group
April 20, 2016 | Slide 44
Working with DOC
Work-flow: ‫בניית תרחישים‬

The function Scenarios permits the management of different
configurations of the same network
© ABB Group
April 20, 2016 | Slide 45
Working with DOC
Work-flow: ‫בחירת שטח חתך כבלים‬

The dimensioning of cables and busways is made trough an
iterative (‫ )מחזורי‬process in order to optimize the cross section

Different Standards are available:
© ABB Group
April 20, 2016 | Slide 46

CEI 64-8 (Italy)

IEC 60364 (generic purpose applications)

IEC 60092 (naval applications)

NFC 15-100 (France)

UNE 20460 (Spain)

VDE 0298-4 (Germany)
Working with DOC
Work-flow: ‫בחירת ציודים‬


DOC sizes and selects all the components automatically
Unlock / Leave unlocked an object: DOC is enabled to change the current component when
It is possible to change the component selected by DOC

Having chosen and locked a different component, DOC will not change it anymore
Working with DOC
Work-flow: ‫כיוון ערכים ביחידות ההגנה‬


A fundamental part of DOC is the module Curves

Time-current curves

Peak limiting curves

Let through energy curves
Possibility to set the parameters
of the switching devices in order
to guarantee protection,
discrimination and back-up
© ABB Group
April 20, 2016 | Slide 48
Working with DOC
Work-flow: ‫כיוון ערכים במתחים שונים‬
Diagram reference voltage
Component rated voltage
© ABB Group
April 20, 2016 | Slide 49
Working with DOC
Work-flow: ‫בדיקת כיוון ההגנות מול כבלים ומפסקים‬
© ABB Group
April 20, 2016 | Slide 50
Working with DOC
Work-flow: Ekip Connect interface

DOC is compatible with the Ekip Connect software

L, S, I and G functions can be imported into Ekip
Connect and associated to a physical device
© ABB Group
April 20, 2016 | Slide 51
Working with DOC
Work-flow: ‫הנפקת מסמכים‬

Header

Calculation and dimensioning
criteria

Short-circuit calculation hypothesis

Single-line diagram

Other reports

discrimination and back-up
© ABB Group
April 20, 2016 | Slide 52
‫סיכום‬
DOC allows…

drawing of the single-line diagram of electrical plant in MV and LV

calculation of all the electrical parameters of the network

sizing of cable and busways

setting and coordination of protection devices

creation of complete and professional project documentation

programming of protection devices directly, thanks to the
compatibility with Ekip Connect
© ABB Group
April 20, 2016 | Slide 53
© ABB Group
April 20, 2016 | Slide 54
Download