Printed in Canada 05/2000
PURLINS
AND GIRTS
AP
www.canammanac.com
American
Institute of Steel
Construction Inc.
Steel Deck
Institute
Steel Joist
Institute
Steel Plus
Network®
Nova Steel
Stoney Creek, ON
WELDING
BUREAU
CANADIA
N
PR O VAL
Canadian
Welding
Bureau
Canadian
Institute of Steel
Construction
Canadian
Construction
Association
Engineered Solutions
Engineered Service
MISSION
To be recognized as the best designer and manufacturer of steel joists and metal construction
components, through flexibility, product quality and exceptional service.
OUR PRODUCTS AND SERVICES
Our entire team is able to suggest optimal and
innovative solutions for bid preparation, project design
and manufacturing.
Our production equipment has always been at
the leading edge of technology. Canam has invested
in computer-aided manufacturing and numericallycontrolled equipment.
We offer a wide range of metal construction
components including joists, trusses, hambro ® joists,
metal plates, purlins and girts, Murox building systems,
Sun steel buildings and variable inertia girders.
Our exceptional service also includes our ability
to deliver just in time and at your convenience. With
our fleet of tractors and semitrailers, we assure you
that we will meet the requirements of your construction
schedule. Depending on the region and the delivery
site, we can transport pieces with dimensions of up
to 16 ft. in width by 120 ft. in length.
WARNING
Although every effort was made to ensure that all
data in this catalogue is factual and that the numerical
values are accurate to a degree consistent with current
structural design practice, Canam Steel does not
assume responsibility for errors or oversights that may
result from the use of the information contained herein.
Anyone making use of the contents of this catalogue
assumes all liability arising from such use. All
suggestions for improvements to this publication will
receive full consideration for future printings.
INTRODUCTION
Canam Steel is pleased to present a new series of cold
formed channels, C’s and Z’s used as purlins and girts.
ADVANTAGES
Canam’s “C” and “Z” shapes are very cost effective
members. Manufactured in a new, fully automated facility,
they are cut to length, punched, formed and painted on a
single line, producing substantial saving in materials and
production time.
The sections are supplied painted either red or gray
and are in conformance with the CPMA-1-73A standard.
MATERIAL
All purlins and girts are cold formed from high-strength
steel to minimize weight while maximizing capacity. The steel
conforms to the requirements of ASTM Standard A607 Grade
50, Steel Sheet and Strap, high-strength, Low Alloy Columbium
or Vanadium, or both, Hot Rolled and Cold Rolled.
DESIGN
The “C” and “Z” sections have been designed
in accordance with the Standard 1996 AISI Specifications.
TOLERANCES
Fabrication
tolerances for the cold
formed “C” and “Z” shapes
are in accordance with
tolerances specified in the
Standard CAN/CSA-A660M91, Certification of
Manufacturers of Steel
Building Systems. Material
thickness tolerances
are in accordance
with the 1996 AISI
Cold-Formed Steel
Specifications Article A3.4.
3
COLD FORMED “C” CHANNELS
Y
b
h
R
t
d
t/2
S.C.
X
e
C.G.
X
x
Y
Normal units are in parenthesis.
d =
b =
h =
R =
t =
A =
C.G. =
S.C. =
EXAMPLE:
C 9 x 7.2
Nominal depth = 9 in.
Nominal weight = 7.2 plf
depth of section (in.)
flange width (in.)
length of lip (in.)
average bent radius (in.)
steel thickness (in.)
area of section (in.2)
center of gravity
shear center
SECTIONS
C 6
C 6
C 6
C 6
C 6
C 8
C 8
C 8
C 8
C 8
C 9
C 9
C 9
C 9
C 9
C 10
C 10
C 10
C 10
C 10
C 10
C 12
C 12
C 12
C 12
C 12
C 14
C 14
C 14
C 14
4
x 2.9
x 3.5
x 4.0
x 4.7
x 5.6
x 3.4
x 4.0
x 4.7
x 5.4
x 6.1
x 4.6
x 5.4
x 6.3
x 7.2
x 8.0
x 3.8
x 4.7
x 5.8
x 6.7
x 7.6
x 8.5
x 5.4
x 6.4
x 7.4
x 8.4
x 9.4
x 7.0
x 8.1
x 9.3
x 10.4
moment of inertia about X-X axis (in.4)
elastic section modulus about X-X axis (in.3)
radius of gyration about X-X axis (in.)
moment of inertia about Y-Y axis (in.4)
elastic section modulus about Y-Y axis (in.3)
radius of gyration about Y-Y axis (in.)
distance from center of web to center
of gravity (in.)
e = distance from center of web to shear center (in.)
Ix
Sx
rx
Iy
Sy
ry
x
=
=
=
=
=
=
=
PROPERTIES
d
b
h
t
Ix
Sx
rx
Iy
Sy
ry
x
e
A
6
6
6
6
6
8
8
8
8
8
9
9
9
9
9
10
10
10
10
10
10
12
12
12
12
12
14
14
14
14
2.75
2.75
2.75
2.75
2.75
2.75
2.75
2.75
2.75
2.75
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
0.060
0.075
0.090
0.105
0.120
0.060
0.075
0.090
0.105
0.120
0.075
0.090
0.105
0.120
0.135
0.060
0.075
0.090
0.105
0.120
0.135
0.075
0.090
0.105
0.120
0.135
0.090
0.105
0.120
0.135
4.480
5.535
6.564
7.568
8.546
8.760
10.841
12.878
14.873
16.826
16.554
19.695
22.779
25.808
28.782
17.062
21.155
25.181
29.138
33.029
36.852
32.468
38.675
44.788
50.807
56.732
55.834
64.697
73.436
82.050
1.322
1.797
2.188
2.523
2.849
1.844
2.561
3.207
3.718
4.207
3.034
3.794
4.669
5.539
6.285
2.540
3.414
4.282
5.290
6.382
7.244
4.172
5.257
6.532
7.942
9.219
6.230
7.776
9.498
11.085
2.397
2.390
2.383
2.375
2.368
3.120
3.112
3.104
3.096
3.088
3.560
3.552
3.544
3.536
3.528
3.921
3.913
3.905
3.897
3.889
3.880
4.604
4.596
4.587
4.578
4.569
5.269
5.259
5.250
5.241
0.886
1.087
1.280
1.466
1.644
0.976
1.198
1.411
1.616
1.812
2.207
2.608
2.996
3.371
3.733
1.853
2.281
2.696
3.097
3.485
3.860
2.408
2.846
3.269
3.679
4.074
2.969
3.411
3.838
4.250
0.487
0.595
0.698
0.796
0.889
0.502
0.614
0.721
0.822
0.919
0.891
1.050
1.203
1.350
1.490
0.734
0.901
1.062
1.216
1.365
1.508
0.917
1.081
1.238
1.390
1.536
1.095
1.255
1.409
1.557
1.066
1.059
1.052
1.045
1.038
1.042
1.035
1.028
1.021
1.013
1.300
1.292
1.285
1.278
1.271
1.292
1.285
1.278
1.270
1.263
1.256
1.254
1.247
1.239
1.232
1.224
1.215
1.208
1.200
1.193
0.931
0.923
0.916
0.908
0.901
0.807
0.800
0.793
0.785
0.778
1.024
1.017
1.010
1.002
0.995
0.976
0.969
0.962
0.954
0.947
0.940
0.874
0.867
0.860
0.853
0.847
0.789
0.783
0.777
0.770
1.449
1.442
1.434
1.427
1.419
1.333
1.326
1.318
1.310
1.303
1.644
1.636
1.629
1.621
1.613
1.600
1.593
1.585
1.577
1.570
1.562
1.500
1.492
1.485
1.477
1.470
1.411
1.404
1.396
1.389
0.780
0.969
1.156
1.341
1.524
0.900
1.119
1.336
1.551
1.764
1.307
1.561
1.814
2.064
2.312
1.110
1.382
1.651
1.919
2.184
2.447
1.532
1.831
2.129
2.424
2.717
2.011
2.339
2.664
2.987
COLD FORMED “Z”
Y
Z
b
h
R
d
t
O
W
t/2
C.G. & S.C.
X
X
Z
W
Y
Normal units are in parenthesis.
d =
b =
h =
R =
t =
A =
C.G. =
S.C. =
EXAMPLE:
Z 8 x 4.9
Nominal depth = 8 in.
Nominal weight = 4.9 plf
SECTIONS
Z 6
Z 6
Z 6
Z 6
Z 6
Z 6
Z 8
Z 8
Z 8
Z 8
Z 8
Z 8
Z 9
Z 9
Z 9
Z 9
Z 9
Z 10
Z 10
Z 10
Z 10
Z 10
Z 12
Z 12
Z 12
Z 12
Z 12
Z 14
Z 14
Z 14
Z 14
x 3.0
x 3.6
x 4.3
x 5.1
x 5.8
x 6.5
x 3.4
x 4.2
x 4.9
x 5.9
x 6.7
x 7.5
x 4.4
x 5.2
x 6.2
x 7.1
x 8.0
x 4.6
x 5.5
x 6.6
x 7.5
x 8.4
x 5.2
x 6.2
x 7.3
x 8.3
x 9.4
x 6.8
x 8.0
x 9.1
x 10.3
depth of section (in.)
flange width (in.)
length of lip (in.)
average bent radius (in.)
steel thickness (in.)
area of section (in.2)
center of gravity
shear center
Ix
Sx
rx
Iy
Sy
ry
=
=
=
=
=
=
rmin =
teta =
DIMENSIONS
moment of inertia about X-X axis (in.4)
elastic section modulus about X-X axis (in.3)
radius of gyration about X-X axis (in.)
moment of inertia about Y-Y axis (in.4)
elastic section modulus about Y-Y axis (in.3)
radius of gyration about Y-Y axis (in.)
radius of gyration about Z-Z axis (in.)
angle between Z-Z axis and Y-Y axis (radians)
PROPERTIES
d
b
h
t
Ix
Sx
rx
Iy
Sy
ry
r min
teta
6
6
6
6
6
6
8
8
8
8
8
8
9
9
9
9
9
10
10
10
10
10
12
12
12
12
12
14
14
14
14
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
0.95
0.95
0.95
0.95
0.95
0.95
0.95
0.95
0.95
0.95
0.95
0.95
0.95
0.95
0.95
0.95
0.95
0.95
0.95
0.95
0.95
0.95
0.95
0.95
0.95
0.95
0.95
0.95
0.95
0.95
0.95
0.060
0.075
0.090
0.105
0.120
0.135
0.060
0.075
0.090
0.105
0.120
0.135
0.075
0.090
0.105
0.120
0.135
0.075
0.090
0.105
0.120
0.135
0.075
0.090
0.105
0.120
0.135
0.090
0.105
0.120
0.135
4.825
5.975
7.101
8.203
9.283
10.340
9.355
11.603
13.810
15.980
18.114
20.210
15.270
18.185
21.054
23.879
26.658
19.555
23.299
26.989
30.623
34.204
30.132
35.928
41.648
47.292
52.862
52.055
60.378
68.601
76.724
1.373
1.792
2.216
2.689
3.094
3.447
1.904
2.524
3.214
3.927
4.528
5.053
2.885
3.692
4.596
5.306
5.924
3.247
4.170
5.215
6.125
6.841
3.969
5.127
6.455
7.664
8.745
6.082
7.696
9.187
10.539
2.437
2.430
2.423
2.417
2.410
2.403
3.168
3.160
3.153
3.146
3.139
3.131
3.514
3.506
3.499
3.492
3.484
3.861
3.854
3.846
3.838
3.831
4.540
4.532
4.524
4.516
4.508
5.195
5.186
5.178
5.169
2.145
2.653
3.143
3.619
4.082
4.533
2.145
2.653
3.143
3.619
4.082
4.533
2.653
3.143
3.619
4.082
4.533
2.653
3.143
3.619
4.082
4.533
2.653
3.143
3.619
4.082
4.533
3.143
3.619
4.082
4.533
0.623
0.772
0.916
1.057
1.195
1.330
0.623
0.772
0.916
1.057
1.195
1.330
0.772
0.916
1.057
1.195
1.330
0.772
0.916
1.057
1.195
1.330
0.772
0.916
1.057
1.195
1.330
0.916
1.057
1.195
1.330
1.625
1.619
1.612
1.605
1.598
1.591
1.517
1.511
1.504
1.497
1.490
1.483
1.465
1.458
1.451
1.444
1.437
1.422
1.415
1.408
1.401
1.394
1.347
1.340
1.334
1.327
1.320
1.276
1.270
1.263
1.257
0.924
0.920
0.916
0.912
0.908
0.904
0.954
0.950
0.946
0.942
0.937
0.933
0.952
0.948
0.943
0.939
0.935
0.949
0.945
0.941
0.936
0.932
0.938
0.933
0.929
0.925
0.920
0.918
0.913
0.909
0.904
-0.535
-0.535
-0.534
-0.533
-0.532
-0.532
-0.372
-0.372
-0.371
-0.370
-0.369
-0.368
-0.318
-0.317
-0.316
-0.315
-0.314
-0.276
-0.275
-0.274
-0.273
-0.272
-0.214
-0.214
-0.213
-0.212
-0.211
-0.172
-0.171
-0.170
-0.170
A
0.81
1.01
1.21
1.40
1.60
1.79
0.93
1.16
1.39
1.61
1.84
2.06
1.24
1.48
1.72
1.96
2.20
1.31
1.57
1.82
2.08
2.33
1.46
1.75
2.03
2.32
2.60
1.929
2.245
2.559
2.871
5
STANDARD DETAILS FOR CANAM CHANNELS AND “Z”
STANDARD HOLES
FOR “C” AND “Z”
TYPICAL DETAILS FOR “Z”
OVERLAP JOINTS OVER BEARING
Slotted Holes 9/16" x 3/4"
Overlap joint for sections < 8 1/4"
1 1/2"
4"
22 1/8"
1 1/2"
22 1/8"
4"
=
=
4"
=
d < 8 1/4"
=
1 1/2"
Overlap joint for sections > 8 1/4"
1 1/2"
4"
22 1/8"
22 1/8"
1 1/2"
3"
3"
=
=
3"
3"
d < 8 1/4"
=
=
1 1/2"
FRAME ATTACHMENT ANGLE
ANGLE CLOSURES
LC
LG
LG
LG
LG
LG
LG
LC
LC
Section
3/4"
Mark
6
Description (in.)
4"
Mark
LC 3.30
L 3 x 3 x 0.09
20
LC 4.35
L 4 x 3.5 x 0.09
20
LC 3.20
L 3 x 2 x 0.09
20
1 3/4"
4"
3"
2"
LG 6.9
L 3 x 2 x .12
5 1/2
9/16
2"
LG 8.9
LG 8.13
L 3 x 2 x .12
L 3 x 2 x .12
7 1/2
7 1/2
9/16
13/16
2"
LG 10.9
LG 10.9
L 3 x 2 x .12
L 3 x 2 x .12
9 1/2
9 1/2
9/16
13/16
3/4"
Length (ft.)
1 3/4"
Description (in.) Length (in.) Holes (in.)
1 3/4"
3"
1 3/4"
steel
Corporation
Head office, main plant
and Canam Murox®,
Sun Building Systems sales offices
4010 Clay Street, P.O. Box 285
Point of Rocks, Maryland 21777-0285
Telephone: (301) 874-5141
Fax: (301) 874-5685
Florida - Plant and sales office
140 South Ellis Road
Jacksonville, Florida 32254
Telephone: (904) 781-0898
Fax: (904) 781-2004
Indiana - Plant and sales office
2341 South 30 th Street, P.O. Box 5057
Lafayette, Indiana 47903-5057
Telephone: (765) 477-7764
Fax: (765) 474-4042
United States «1»
Illinois - Sales office
7501 Lemont Road, Suite 315
Woodridge, Illinois 60517-2660
Telephone: (630) 910-1700
Fax: (630) 910-1785
Indiana - Sales office
228 East 10th Street
Indianapolis, Indiana 46202
Telephone: (317) 634-0414
Fax: (317) 634-0415
Kansas - Sales office
6803 West 64 th Street, Suite 111
Overland Park, Kansas 66202
Telephone: (913) 384-9809
Fax: (913) 384-9816
Missouri - Plant and sales office
2000 West Main Street
Washington, Missouri 63090-1008
Telephone: (636) 239-6716
Fax : (636) 239-4135
Maine
Murox Sales office and
Sun Building Systems
16 Cardinal Lane
Poland Spring, Maine 04274
Telephone: (207) 998-4068
Fax: (207) 998-2065
Ohio - Plant and sales office
555 North Yearling Road
Columbus, Ohio 43213
Telephone: (614) 235-9805
Fax: (614) 235-9901
Maryland - Sales office
P.O. Box 296
Phoenix, Maryland 21131-0296
Telephone: (410) 472-4327
Fax: (410) 472-4827
Washington - Plant and sales office
2002 Morgan Road
Sunnyside, Washington 98944
Telephone: (509) 837-7008
Fax: (509) 839-0383
Massachusetts - Sales office
50 Eastman Street
Easton, Massachusetts 02334-1245
Telephone: (508) 238-4500
Fax: (508) 238-8253
Alabama - Sales office
31 Newport Landing
Lowndesboro, Alabama 36752
Telephone: (334) 278-3127
Fax: (334) 278-3128
Michigan - Sales office
1063 S. State Road, Suite 7
Davison, Michigan 48423
Telephone: (810) 653-3506
Fax: (810) 653-3906
Alabama - Sales office
701 Branch Avenue
Sylacauga, Alabama 35150
Telephone: (256) 208-0237
Fax: (256) 781-4090
Minnesota - Sales office
768-103 Twelve Oak Center
15500 Wayzata Blvd.
Wayzata, Minnesota 55391
Telephone: (952) 475-9165
Fax: (952) 475-2710
Arizona - Sales office
8687 E. Via de Ventura, Suite 101
Scottsdale, Arizona 85258
Telephone: (480) 348-1112
Fax: (480) 348-1117
California - Sales office
3532 Marin Drive
Irvine, California 92606
Telephone: (949) 786-3315
Fax: (949) 786-4201
Florida - hambro ® sales office
450 East Hillsboro Boulevard
Deerfield Beach, Florida 33441
Telephone: (954) 571-3030
Fax: (954) 571-3031
Georgia - Sales office
150 Stanley Court Suite C
Lawrenceville, Georgia 30045
Telephone: (770) 682-7815
Fax: (770) 682-9604
New Jersey - Sales office
3 Page Street, P.O. Box 447
Madison, New Jersey 07940
Telephone: (973) 822-3600
Fax: (973) 822-0730
New York - Sales office
139 Hawthorne Way
Chittenango, New York 13037-1010
Telephone: (315) 687-5870
Fax: (315) 687-3701
Oregon - Sales office
2081 Holcom Springs Road
Gold Hill, Oregon 97525
Telephone: (541) 855-9057
Fax: (541) 855-2027
Romania «40»
102 Bremen Lane
McMurray, Pennsylvania 15317
Telephone: (724) 942-6262
Fax: (724) 942-4035
1012 Hampstead Road
Wynnewood, Pennsylvania 19096
Telephone: (610) 896-4790
Fax: (610) 896-4815
Brasov
Engineering office
3 - 5 N.D. Cocea, Etaj-2-3
2200 Brasov, Romania
Telephone: (68) 47 11 30
Fax: (68) 41 92 17
DE MEXICO
South Carolina - Sales office
112 Mallard Lakes Court
Lexington, South Carolina 29072
Telephone: (803) 996-3200
Fax: (803) 996-3232
Tennessee - Sales office
8620 Trinity Road, Suite 207
Cordova, Tennessee 38018
Telephone: (901) 759-1524
Fax: (901) 759-3969
Texas - Engineering office
329 North West Renfro
Burleson, Texas 76028-6225
Telephone: (817) 426-1770
Fax: (817) 426-1780
Sales office
6969 Hollister, Suite 1205
Houston, Texas 77040
Telephone: (713) 895-0733
Fax: (713) 895-0778
Utah - Sales office
1332 S. 350 East
Garland, Utah 84312
Telephone: (435) 257-2234
Fax: (435) 257-2235
Virginia - Sales office
11008 Blake Lane
Bealeton, Virginia 22712
Telephone: (540) 439-4344
Fax: (540) 439-4345
Washington - Sales office
240 N.W. Gilman Blvd., Suite G
Issaquah, Washington 98027
Telephone: (425) 392-2935
Fax: (425) 392-3149
India «91»
Calcutta
Engineering office
5A & 5B Circular Mansion
222 A.J.C. Bose Road
Calcutta - 700 017, India
Telephone: (33) 280-9740
Fax: (33) 280-2435
Mexico «52»
Monterrey, NL
Head office and main plant
Carretera Monterrey-Laredo km. 22.450
Ciénega de Flores, Nuevo Leon, Mexico
C.P. 65550
Telephone: (8) 329-0100
Fax: (8) 329-0110
Ciudad Juarez, Chih
Plant
Carretera Panamericana # 9920
Colonia Puente Alto
Ciudad Juarez, Chihuahua
Mexico 32695
Telephone: (16) 29 09 38
Fax: (16) 33 13 48
Hermosillo, Sonora
Sales office
Calle Papagos Lote 2 y 3
entre Carretera a Sahuaripa Y
Y Pimpas Parque, Ind. Tercera stapa
Hermosillo, Sonora, Mexico
Telephone: (62) 51 02 15
Fax: (62) 51 00 02
Mexico, DF
Sales office
Luz Saviñon #13, Piso 6, Colonia del Valle
Del. Benito Juarez, C.P. 03100
Mexico, DF
Telephone: (55) 36 25 20
Fax: (55) 36 25 29
El Salvador«503»
San Salvador
Sales office
Avenida «A» No. 243 San Salvador
Calle de Colonia San Jose
Zona Cine Variedades
San Salvador, El Salvador C.A.
Telephone: (503) 226-2948
Fax: (503) 226-0369
France «33»
Niort
Head office and main plant
4, rue Blaise Pascal, boîte postale 8616
79026 Niort Cedex 9, France
Telephone: (5) 49 04 47 00
Fax: (5) 49 79 19 06
Pennsylvania - Sales office
3280 St. Andrews Drive
Chambersburg, Pennsylvania 17201
Telephone: (717) 263-7432
Fax: (717) 263-7542
Jarny
Plant and sales office
10, route de Tichémont, boîte postale 6
54802, Jarny Cedex, France
Telephone: (3) 82 47 17 00
Fax: (3) 82 47 17 01
Canada «1»
Saint-Gédéon, QC
Head office and main plant
115, boul. Canam Nord
Saint-Gédéon (Québec) G0M 1T0
Telephone: (418) 582-3331
Fax: (418) 582-3381
Boucherville, QC
Plant and sales office and
Murox® sales office
200, boul. Industriel
Boucherville (Québec) J4B 2X4
Telephone: (450) 641-2820
Fax: (450) 641-3132
Calgary, AB
Plant and sales office
223 - 53 rd Avenue S.E.
Calgary, Alberta T2H 0N2
Telephone: (403) 252-7591
Fax: (403) 253-7708
Laval, QC
Plant and sales office
807, rue Marshall
Laval (Québec) H7S 1J9
Telephone: (514) 337-8031
Fax: (450) 668-3091
http://www.canammanac.com
Mississauga, ON - Plant and sales office
1739 Drew Road
Mississauga, Ontario L5S 1J5
Telephone: (905) 671-3460
Fax: (905) 671-3924
Québec, QC
Structal 1982 inc.
Head office and main plant
1445, rue du Grand Tronc
Québec (Québec) G1N 4G1
Telephone: (418) 683-2561
Fax: (418) 688-8512
Boucherville,QC
Sales office - Steel joists and steel deck
200, boul. Industriel
Boucherville (Québec) J4B 2X4
Telephone: (450) 641-8770
Fax: (450) 641-8769
Edmonton, AB - Sales office
8832 60th Avenue
Edmonton, Alberta T6E 6A6
Telephone: (780) 448-0939
Fax: (780) 490-0838
Saint-Joseph, QC - Machine shop
125, rue du Parc
Saint-Joseph (Québec) G0S 2V0
Telephone: (418) 397-8070
Fax: (418) 397-8017
Kingston, ON - Murox® sales office
and Sun Building Systems
208 Glen Castle Road
Kingston, Ontario K7M 4N6
Telephone: (613) 384-8360
Fax: (613) 389-3849
Boucherville, QC
Engineering, credit office and
hambro ® sales office
270, chemin Du Tremblay
Boucherville (Québec) J4B 5X9
Telephone: (450) 641-4000
Fax: (450) 641-4001
Laval, QC
Sales office - Sun Building Systems
807, rue Marshall
Laval (Québec) H7S 1J9
Telephone: (450) 629-1547
1-888-819-0227
Fax: (450) 663-6511
Mississauga, ON - Sales office
Murox® and Sun Building Systems
1755 Drew Road
Mississauga, Ontario L5S 1J5
Telephone: (905) 612-9796
1-877-366-7796
Fax: (905) 671-8399
Moncton, NB - Sales office
95 Foundry Street
Heritage Court, Suite 417
Moncton, New Brunswick E1C 5H7
Telephone: (506) 857-3164
Fax: (506) 857-3253
Sainte-Foy, QC
Engineering and sales office
660, rue Graham-Bell
Sainte-Foy (Québec) G1N 4C1
Telephone: 1-800-681-4440
Fax: (418) 687-3364
Surrey, BC - Sales office
314 - 9801 King George Highway
Surrey, British Colombia V3T 5H5
Telephone: (604) 583-2177
Fax: (604) 584-8227
Ville de Saint-Georges
Murox® sales office
11535, 1re Avenue, bureau 500
Ville de Saint-Georges, Québec G5Y 7H5
Telephone: (418) 228-8031
Fax: (418) 227-4584
Printed in Canada 05/2000
PURLINS
AND GIRTS
AP
www.canammanac.com
American
Institute of Steel
Construction Inc.
Steel Deck
Institute
Steel Joist
Institute
Steel Plus
Network®
Nova Steel
Stoney Creek, ON
WELDING
BUREAU
CANADIA
N
PR O VAL
Canadian
Welding
Bureau
Canadian
Institute of Steel
Construction
Canadian
Construction
Association
Engineered Solutions
Engineered Service