FDPH Enclosed and Gasketed Diecast Industrial Hazardous Location / 2 or 3-Lamp T5, T8 PROJECT INFORMATION FEATURES Project Name Type Catalog No. Date HOUSING • For use in wet, outdoor, hazardous, hosedown, and corrosive locations for high ambient conditions • Accessible drop down ballast tray • T5 14W/28W lamp availability. Up to three lamps per 2'/4' unit • T5 twin tube 50W available in 2' (1 × 50W) and 4' (2 × 50W) housings • Ballast backup capability • Thru branch, single circuit wiring capability • Copper-free (<0.4% copper) die-cast aluminum housing • Lens - Impact resistant polycarbonate. Prismatic or clear • Lens retainers - 316SS allen socket head (3/16" or 5mm driver) • Gasket - silicone • Finish - electrostatically applied baked powder polyester paint • UL 844:Class I, Div. 2 Groups A, B, C, D; Class I, Zone 2 Groups IIC, IIB, IIA; Class II, Div. 2 Groups F, G (2' only - T Code = T6); Class III (2' only) • IP66 and NEMA 4X listed • CSA certified to UL 844 suitable for Wet Locations Marine Mounting option to UL 1598A ELECTRICAL Copper-free (less than 0.4% copper) die cast aluminum housing. SHIELDING Lens is of impact resistant polycarbonate material with 316SS allen socket head retainers. BALLASTS Energy efficient, thermally protected, automatic resetting, Class P, high power factor, sound rated A, unless otherwise specified. CEE NEMA Premium compliant. Standard class “P,” thermally protected, autoresetting HPF ballast, sound rated A. CEE NEMA Premium compliant. All ballast leads extend a minimum of 6" through access location. CERTIFICATION All luminaires are built to UL 1598 standards and bear appropriate UL and cUL or CSA labels. Wet location labeling is standard. IP66 and NEMA 4X rated and UL 844 listed for Hazardous Locations. Marine UL1598A listing and NFS listing available as options. ORDERING INFORMATION FDPH EXAMPLE FDPH4-232-CP-EU – MODEL – NO. OF LAMPS IN CROSS SECTION FDPH Die Cast Performer Series Hazardous LENS CP Clear Polycarbonate Smooth PP Prismatic Polycarbonate 2 Two 3 Three (4' only) LENGTH 2 2' 4 4' LAMP TYPE 14 17 28 32 BALLAST2 E Electronic T8, Instant Start, <10% THD, 0°F EP Electronic T5 Linear or T8, Programmed Start <10% THD, 0°F – VOLTAGE U 347 220 220/50 120V-277V 347V 220V1 220V, 50 HZ1 OPTIONS BHD65U Hazardous and Damp Rated Emergency Battery Pack (T8 only) GLR Fast Blow Fuse VPS Vibration Resistant Sockets (Standard w/ML option) ML UL 1598 Marine Outdoor NC National Sanitation Foundation 2', T5: 14 Watt 2', T8: 17 Watt (2-Lamp only) 4', T5: 28 Watt 4', T8: 32, 30, 28, or 25 Watt (2-Lamp only) ACCESSORIES (ORDER SEPARATELY) 1 2 Fusing not available. Ballast may not be available in all combinations of lamp/voltage/starting temp/THD shown above. Contact your local Columbia Lighting Representative for more details. Page 1/3 Rev. 09/19/14 PTBS Top Bracket Surface Mount, 2 Per Kit, 304 Stainless PTBA Top Bracket Wall/Angle Kit, 2 Per Kit, 304 Stainless EXTREME ENVIRONMENT / FDPH © 2014 Columbia Lighting, a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Columbia Lighting reserves the right to change specifications without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Tech Support 864.678.1668 / Website www.columbialighting.com FDPH Enclosed and Gasketed Diecast Industrial Hazardous Location / 2 or 3-Lamp T5, T8 PHOTOMETRIC DATA - CONTACT FACTORY DIMENSIONAL DATA PRODUCT AVAILABILITY 53/8" 2" 21/4" 49/16" NO. OF LAMPS IN CROSS SECTION NO. OF LAMPS IN FIXTURE LAMP TYPE CLASS I DIV 2 CLASS I ZONE 2 CLASS II DIV 2 LENGTH 2' 2 3 2 3 14, 17 14 T6 T4A T6 T4 T6 T6 273/8" 273/8" 4' 2 2 2 2 2 3 48T8HO 28, 32 28 T5 T5 T5 T5 T5 T5 - 501/2" 501/2" 501/2" SIZE 511/2" NOTE: All dimensions are in inches; dimensions and specifications are subject to change without notice. Please consult factory or check sample for verification. Page 2/3 Rev. 09/19/14 EXTREME ENVIRONMENT / FDPH © 2014 Columbia Lighting, a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Columbia Lighting reserves the right to change specifications without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Tech Support 864.678.1668 / Website www.columbialighting.com FDPH Surface Mounting Details For LUN, FNPV, FNPS, LU PEBU Accessory 0.31" × 1.75" SLOT D 0.312" E 4.50" 3.12" 1.00" 0.31" × 1.69" SLOT PEBA Accessory 0.22" G 3.12" 90° ADJUSTMENTS F D E F G 2' 25.75" (654 mm) 0" (0 mm) 25.75" (654 mm) 2.38" (60 mm) 4' 49.75" (1264 mm) 0.38 (10 mm) 49.75" (1264 mm) 2.75" (70 mm) 8' 97.75" (2483 mm) 0.38" (10 mm) 97.75" (2483 mm) 2.75 (70 mm) For FDPS, FDPH, FNPS, FNPH PTBS Accessory1 D 0.44" × 0.89" SLOT E 0.75" 7.12" PTBA Accessory2 90° ADJUSTMENTS 15° INCREMENTS F 0.31" G 2.38" 1.38" 1 2 D E F G 4' 45.65" (1118 mm) — 48.40" (1186 mm) — 8' 93.65" (2294 mm) 46.83" (1147 mm) 96.40" (2362 mm) 46.83 (1147 mm) PTBS has two mounting brackets; PTBS3 has three mounting brackets and only used with 8' fixtures. PTBA has two mounting brackets; PTBA3 has three mounting brackets and only used with 8' fixtures. NOTE: All dimensions are in inches; dimensions and specifications are subject to change without notice. Please consult factory or check sample for verification. Page 3/3 Rev. 09/19/14 EXTREME ENVIRONMENT / FDPH © 2014 Columbia Lighting, a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Columbia Lighting reserves the right to change specifications without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Tech Support 864.678.1668 / Website www.columbialighting.com