HIGH SPEED DIGITAL OUTPUT
TYPE SOP OPTOCOUPLER
D
PS9701
DESCRIPTION
• SOP (SMALL OUTLINE PACKAGE)
4.5 x 7.3 x 2.3 mm MAX
PS9701 is an optically coupled isolator containing a GaAIAs
LED on the light emitting side (input side) and a photodiode and
a signal processing circuit on the light receiving side (output
side) on one chip. This is an SOP (Small Out-line Package)
type for high density applications.
UE
FEATURES
• HIGH SPEED RESPONSE
tPHL, tPLH = 50 ns TYP
• HIGH ISOLATION VOLTAGE
BV = 2500 Vr.m.s. MIN
APPLICATIONS
• LOW INPUT CURRENT
IFHL = 2.5 mA TYP
• COMPUTER AND PERIPHERAL MEMORY
• ELECTRONIC INSTRUMENT
• TAPING PRODUCT NUMBER
PS9701-F3
IN
• AUDIO-VISUAL INTERFACE
ESD SENSITIVE
ELECTRICAL CHARACTERISTICS (TA = 25 °C)
PART NUMBER
NT
PARAMETERS
PS9701
UNITS
MIN
TYP
MAX
1.4
1.65
1.9
VF
Forward Voltage, IF = 10 mA
V
IR
Reverse Current, VR = 5 V
µA
Ct
Capacitance, V = 0, f = 1 MHz
pF
60
IOH
High Level Output Current
Vcc = VO = 5.5 V, IF = 250 µA, TA = 0 to 70°C
µA
2
250
VOL
Low Level Output Voltage
Vcc = 5.5 V, IF = 7.5 mA, IO = 13 mA, TA = 0 to 70°C
V
0.3
0.6
ICCH
High Level Supply Current, VCC = 5.5 V, IF = 0, TA = 0 to 70°C
10
mA
4
6
8
ICCL
Low Level Supply Current, VCC = 5.5 V, IF = 10 mA, TA = 0 to 70°C
mA
9
12
15
IFHL
Threshhold Input Current, High → Low
VCC = 5 V, VO = 0.8 V, RL = 350 Ω, TA = 25°C
VCC = 5 V, TA = -40 to +85 °C, VO = 0.8 V, RL = 350 Ω
mA
0.5
2.5
5
7
SC
O
Coupled
Detector
Diode
SYMBOL
R1-2
Isolation Resistance, Vin-out = 1 k VDC, RH = 40 to 60%
Ω
C1-2
Isolation Capacitance, V = 0, f = 1 MHz
pF
0.4
tPHL
Propagation Delay Time1, High → Low
VCC = 5 V, IF = 7.5 mA, RL = 350 Ω, CL = 15 pF
ns
50
75
tPLH
Propagation Delay Time1, Low → High
VCC = 5 V, IF = 7.5 mA, RL = 350 Ω, CL = 15 pF
ns
50
75
tr
Rise Time, VCC = 5 V, IF = 7.5 mA, RL = 350 Ω, CL = 15 pF
ns
20
tf
Fall Time, VCC = 5 V, IF = 7.5 mA, RL = 350 Ω, CL = 15 pF
ns
10
1011
DI
1.Test Circuit for Propagation delay time
350 mV
(IF = 7.5 mA)
175 mV
(IF = 3.75 mA)
IF
1
Pulse Input
= 1µs
(PW
Duty Cycle = 1/10)
IF Monitor
3
VCC = 5 V
6
5
0.01
µF
RL = 350 Ω
Input
0
VO = Monitor
5V
CL
Output
4
1.5 V
VOL
51 Ω
tPHL
tPLH
*CL is approximately 15 pF, which includes probe and stray wiring capacitance.
California Eastern Laboratories
PS9701
ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C)
PARAMETERS
UNITS
PS9701
RATINGS
Top View
30
5
Supply Voltage
Output Voltage
Output Current
Power Dissipation
V
V
mA
mW
7
7
50
85
6
4.0±0.5
0.15 +0.10
-0.05
0.5 ± 0.3
1.27
0.4 +0.10
-0.05
0.25 M
ORDERING INFORMATION
PART
PART NUMBER
PS9701
UNITS MIN TYP MAX
µA
0
250
mA
5
7.5 15
V
4.5
5
5.5
°C
0
25
70
PACKAGE
PS9701
5 Pin SOP
PS9701-E3
SAFETY STANDARDS
APPROVAL
Magazine case 100 pcs
UL approved
Embossed Tape 900 pcs/reel
PS9701-E4
PS9701-F3
Embossed Tape 3500 pcs/reel
PS9701-F3
PS9701-V
* By-pass capacitor of more than 0.1 µF is used between VCC and
GND near the device.
PACKING STYLE
NUMBER
NT
PARAMETERS
Low Level Input Current
High Level Input Current
Supply Voltage
Operating Temperature
4.4
IN
Notes:
1. Operation in excess of any one of these parameters may result in
permanent damage.
2. AC voltage for 1 minute at TA = 25 °C, RH = 60% between input
and output.
SYMBOLS
IFL
IFH
VCC
TOP
Magazine case 100 pcs
PS9701-V-E3
VDE0884 approved
Embossed Tape 900 pcs/reel
PS9701-V-E4
PS9701-V-F3
Embossed Tape 3500 pcs/reel
SC
O
PS9701-V-F4
TYPICAL PERFORMANCE CURVES (TA = 25 °C)
POWER DISSIPATION
vs. AMBIENT TEMPERATURE
MAXIMUM FORWARD CURRENT
vs. AMBIENT TEMPERATURE
100
30
20
10
20
40
60
80
Ambient Temperature, TA (°C)
100
Power Dissipation, PC (mA)
40
DI
Maximum Forward Current, IF (mA)
50
0
Anode
Cathode
GND
VO
VCC
7.0 ± 0.3
2500
-40 to +85
-55 to +125
RECOMMENDED
OPERATING CONDITIONS
1.
3.
4.
5.
6.
3
UE
Vr.m.s.
°C
°C
Operating Temperature
Storage Temperature
4
1
2.1±0.2
Isolation Voltage2
5
D
mA
V
2.0
Forward Current
Reverse Voltage
0.1 ± 0.1
SYMBOLS
Diode
IF
VR
Detector
VCC
VO
IO
PC
Coupled
BV
TOP
TSTG
OUTLINE DIMENSIONS (Units in mm)
80
60
40
20
0
20
40
60
80
Ambient Temperature, TA (°C)
100
PS9701
TYPICAL PERFORMANCE CURVES (TA = 25 °C)
NORMALIZED THRESHHOLD INPUT CURRENT
vs. AMBIENT TEMPERATURE
TA = 100 ˚C
50 ˚C
25 ˚C
0 ˚C
-25 ˚C
0.1
0.01
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
0.8
0.6
0.4
0.2
0
-25
0
25
50
75
100
1.5
Low Level Output Voltage, VOL (V)
5V
RL
6
VO
5
4
RL = 100 Ω
RL = 350 Ω
RL = 1 k Ω
3
2
SC
O
1
2
4
6
8
10
IF = 7.5 mA
VCC = 5.5 V
1.25
NT
Output Voltage, VO (V)
1.0
LOW LEVEL OUTPUT VOLTAGE
vs. AMBIENT TEMPERATURE
7
1.00
0.75
0.5
IOL = 13 mA
0.25
IOL = 5 mA
0
12
-25
0
25
50
75
Forward Current, IF (mA)
Ambient Temperature, TA (°C)
PROPAGATION DELAY TIME
vs. FORWARD CURRENT
PROPAGATION DELAY TIME
vs. LOAD RESISTANCE
DI
40
tPHL
20
5
10
VCC = 5 V
RL = 350 Ω
15
20
Forward Current, IF (mA)
25
30
Propagation Delay Time, tPHL, tPLH (ns)
tPLH
60
100
1000
80
Propagation Delay Time, tPHL, tPLH (ns)
1.2
IN
OUPUT VOLTAGE vs.
FORWARD CURRENT
0
IFHL is normalized data to 1
at TA = 25 ˚C, VCC = 5 V
VO = 0.8 V, RL = 350 Ω
Ambient Temperature, TA (°C)
Forward Voltage, VF (V)
0
1.4
UE
10
1
1.6
NormalizedThreshold Input Current, IFHL
Forward Current, IF (mA)
100
D
FORWARD CURRENT
vs. FORWARD VOLTAGE
IF = 7.5 mA
VCC = 5 V
PW = 1 µs
duty 1/10
500
tPLH
100
50
tPHL
10
100
500
1k
5 k 10 k
Load Resistance, RL (Ω)
50 k
PS9701
TYPICAL PERFORMANCE CURVES (TA = 25 °C)
SWITCHING TIME
vs. AMBIENT TEMPERATURE
PROPAGATION DELAY TIME
vs. AMBIENT TEMPERATURE
25
IF = 7.5 mA
VCC = 5 V
RL = 350 Ω
tPLH
60
40
tPHL
20
0
-50
-25
0
25
50
75
100
15
10
tf
5
0
-50
-25
NT
SC
O
DI
0
25
50
75
Ambient Temperature, TA (°C)
IN
Ambient Temperature, TA (°C)
tr
UE
80
20
D
100
IF = 7.5 mA
VCC = 5 V
RL = 350 Ω
Switching Time, tr, tf (ns)
Propagation Delay Time, tPHL, tPLH (ns)
120
100
PS9701
TAPING SPECIFICATIONS (Units in mm)
OUTLINE AND DIMENSIONS (TAPE)
OUTLINE AND DIMENSIONS (REEL)
2.0
4±0.1
2±0.1
1.55±0.1
1.75±0.1
15°
8±0.1
7.4±0.1
4.6±0.1
0.3
φ60
UE
1.55±0.1
φ13.0±0.5
15°
φ180
2.0±0.5
φ13.0±0.5
12±0.2
D
2.4±0.1
5.5±0.1
φ21.0±0.8
13.0±1.0
Packing : 900 pcs/reel
TAPE DIRECTION
PS9701-E3
IN
PS9701-E4
NEC
9701
402
NEC
9701
402
NEC
9701
402
NT
NEC
9701
402
OUTLINE AND DIMENSIONS (TAPE)
SC
O
4±0.1
2±0.1
1.55±0.1
NEC
9701
402
NEC
9701
402
OUTLINE AND DIMENSIONS (REEL)
1.5 ± 0.1
1.5 ± 0.1
1.75±0.1
12
0°
2.4±0.1
φ21.0 ± 0.8
5.5±0.1
8±0.1
4.6±0.1
1.5 ± 0.5
φ13.0±0.5
2.0 ± 0.5
φ 330
1.55±0.1
φ80±5.0
12±0.2
7.4±0.1
60
°
6.0 ± 1
DI
0.3
+2.0
12.4 -0.0
Packing: 3500 pcs/reel
TAPE DIRECTION
PS9701-F3
PS9701-F4
NEC
9701
402
NEC
9701
402
NEC
9701
402
NEC
9701
402
NEC
9701
402
NEC
9701
402
PS9701
RECOMMENDED SOLDERING CONDITIONS
D
235 °C or below (package surface temperature)
30 seconds or less
Three
Rosin flux containing a small amount of chlorine
(The flux with a maximum chlorine content of 0.2 Wt % is recommended
UE
(heating)
to 10 s
235 ˚C (peak temperature)
210 ˚C
to 30 s
120 to 160 ˚C
60 to 90 s
(preheating)
IN
Package Surface Temperature T (˚C)
(1) Infrared reflow soldering
• Peak reflow temperature
• Time of temperature higher than 210 °C
• Number of reflows
• Flux
260 °C or below
10 seconds or less
One
Rosin flux containing a small amount of chlorine
(The flux with a maximum chlorine content of 0.2 Wt % is recommended.)
SC
O
(2) Dip soldering
• Temperature
• Time
• Number of times
• Flux
NT
Time (s)
DI
(3) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
Life Support Applications
These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected
to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL
for all damages resulting from such improper use or sale.
EXCLUSIVE NORTH AMERICAN AGENT FOR
RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS
CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279
24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM
12/04/2001
DATA SUBJECT TO CHANGE WITHOUT NOTICE