T­LUX tubes are the latest generation of CFL tube replacements from LED­SUPPLIES.COM featuring
an unbeatble combination of life expectancy, brightness and power efficiency.
T­LUX tubes are designed to replace medium bi-pin T8 and T12 fluorescent tubes. T­LUX fits directly into most
fluorescent fixtures providing a simple upgrade to high quality LED lighting. T­LUX is optimized to
provide light outputs comparable to fluorescent and delivers the immediate benefits of white-LED lighting;
long lifetimes, no maintenance, high efficency, no mercury, no recycling, no flickering, no buzzing, instant
start, cold temperature operation, and high quality light. It provides energy savings of up to 75% over
fluorescent applications that require long hours with low occupancy rates such as stairwells, corridors,
warehouses, and remote locations. The high quality T­LUX replacement tube is constructed from
extruded aluminum to providing a very robust LED lighting solution.
Why our T­LUX LED T8 tubes?
-Much longer life than CFL tube: min. 10 years assuming 8 hours use per day ­ 5 Year Warranty
-70%~80% Energy-saving over Fluorescent tubes
-Solid State, high shock/vibration resistant
-Work without ballast, Instant soft-start
-No RF interference, No fickering or buzzing
-Quick and easy installation to minimize retrofit costs
-Minimum maintenance costs, Produce little Heat
-No Mercury and other hazardous materials, fully RoHS2-compliant (now part of CE)
-Continuous operation for white LEDs (10 years for other colors)
-Rated to operate from -4°F to 104°F [-20°C to 40°C],perfect for
environments with extreme climates
-Epistar+Intermatix LED packaging solution, no patent trouble
-The newest design
-The best cost-effective
-Complete electricity isolation design, safety prove
Technical Parameters
Standard length 60cm / 120cm / 150cm / 180cm
Rated input voltage 100-240V AC, 50/60Hz,maximal input
voltage 277V AC
Power: 9W/ 18W / 22W / 32W
PF (power factor) >0.92
SMD2835 LED
Applications
parking lot
office
residential
railway station
warehouse
bus
signage
Dimensions
(Unit: mm/inch)
Specifications
4 four kinds of end caps colors.
Type
Frosted
Clear
Model number
LED­T8-60-WW-F
LED­T8-60-DW­F
LED­T8­60­CW­F
LED­T8­120­WW­F
LED­T8­120­DW­F
LED­T8­120­CW­F
LED­T8­150­WW­F
LED­T8­150­DW­F
LED­T8­150­CW­F
LED­T8­600­WW
LED­T8­600­DW
LED­T8­600­CW
LED­T8­1200­WW
LED­T8­1200­DW
LED­T8­1200­CW
LED­T8­1500­WW
LED­T8­1500­DW
LED­T8­1500­CW
LED Type
SMD 2835
Color
voltage
Warm White 3000K
Natural white 4000K
White 6000K
Warm White 3000K
Natural white 4000K
White 6000K
Warm White 3000K
AC100-240V 50/60Hz
Natural white
White 6000K
MAX.277V
Warm White 3000K
Natural white
(DC 12/24V available)
White 6000K
Warm White 3000K
Natural white 4000K
White 6000K
Warm White 3000K
Natural white 4000K
White 6000K
Length
(cm)
Power
(W)
CRI
60
9
≥80
120
18
≥80
150
22
≥80
60
9
≥80
120
18
≥80
150
22
≥80
Light output
(lm±10%)
1071
967
982
2143
2031
2044
2315
2572
2594
1219
1111
1146
2680
2534
2514
2859
3175
3150
LED
Q’ty
PF
96
192
240
≥0.92
96
192
240
Absolute Maximum Rating
Parameter
Rating
Units
67
°C
Operating Temperature
-20~+40
°C
Storage Temperature
Equilibrium Temperature
-40~+85
°C
52
°C
Aluminum Heat sink Temperature
Installation Drawing
How to install LED Tube?
AC 100-240V
AC 100-240V
AC 100-240V
Installation Inductive Ballast
Remove the
Inductive ballast
Inductive Ballast
L
N
G13 Lamp holder
G13 Lamp holder
AC110V/220V
L
N
L
N
G13 Lamp holder
G13 Lamp holder
AC110V/220V
Fluorescent tube
G13 Lamp holder
AC110V/220V
Fluorescent tube
G13 Lamp holder
Fluorescent tube
Delete the starter
S
S
Step 1
Step 2
Step 3
Normal fluorescenttube
T8 LED tube
Takedwon Normal fluorescenttube
Remove ballast anddoitwithout
Openthehousecover
Takedwon starteranddoitwithout
Step 1
Step 2
Cutoutthewireofnouse
Insatall T8 LED tube
connectorbescreweddown
Power
Power
Comebackthehousecover
Power
Connect lead wirebyconnector
100~240V
Step 3
Step 4
Installation information:
Power must be cut off before installation, fix it on the position of installation holes, connection of the power supply must be sealed.
1.Please read the specification first, to make sure the service environment matches the condition in the specification before using.
2.Please confirm the applicable power supply before using.
3.Make sure the switch of product is off before connect to the power supply to prevent electric shock.
4.Operation against rules may damage your property even harm to your personal safety.
5.Preliminarily estimate required quantity of LED lights, then according to the power rating of single flood light to figure out
the total power and design power supply plan.
6.Dangerous high voltage, Non-professionals are not allowed to maintain the products.
If the exterior flexible cable or wire is damaged, it must exchange by the supplier, its agent or other similar qualified personnels to
avoid dangers.