®
Product Overview
PB-4000-1008
Product Guide
A Wholly Owned Subsidiary of Flanders Corporation
Flanders / Air Seal
Combination Housings
• Two, three or more catalogued housings joined together to
form one solid multi-stage unit
• Modifications to any unit is no problem
• An example of a modified unit would be the combination
unit shown to left with a 3” structural steel base
• Availabe in galvanzed, stainless steel or painted finish (custom colors available upon request)
Chemical Media Units
Bulk Fill Systems
•
Bulk-Fill filter housings - stand alone air scrubber
without a fan
• Deep bed scrubbers - complete air scrubber system with a fan.
Either system offers the following options:
- Three different media bed depths
- Multi-pass or single pass media beds
- Four different construction materials
- Nine sizes
- Two design velocities
- Any custom configurations
• Available in galvanized, stainless steel or painted finish (custom colors available upon request)
Fan Pack II
•
•
•
•
•
•
•
Fully self-contained industrial grade air cleaning systems
Designed for precise control of particulate, gas-phase and
bio-aerosol contaminants (or any combination) from process or ambient air
Features integral fans sized to fit the specified demand and
efficiently deliver the required air volume
Can be installed as ducted systems or without ductwork to
remove fugitive airborne contaminants
Units are constructed of 16 or 14 gauge galvanized steel
with 3” structural steel base
The following options are available: seam welded, insulation, gages, and hang bases
Available in galvanized, stainless steel or painted finish (custom colors available upon request)
Product Guide
Air Handling Units
•
•
•
•
10,000 CFM panel seal large room size air handling units
Units designed and fabricated to your specifications
Air handling units are offered in three styles: Panelseal,
Uniseal, and Custom
1,000 - 100,000 CFM units are our specialty
Availabe in galvanzed, stainless steel or painted finish (custom colors available upon request)
Custom Three Stage Filtration Unit
•
•
•
•
Inlet Screen with 2” roughing filter, 4” medium efficient
Filter and 12” HEPA
Horizontal air inlet to vertical air discharge
Unit is epoxy coated and has 3”structural base
Available in galvanized, stainless steel or painted finish (custom colors available upon request)
Mist Collectors
• “C-Mist” - A filtration unit designed to remove water mist
and or oil mist. (These units do not include fan)
- CM-100: Single stage filtration model designed to accommodate 2” and 4” oil mist filters
- CM-200: Two-stage model designed for oil mist removal
•
•
•
•
•
“C-Pack” - A filtration unit designed to remove water mist
and or oil mist. (These units include fan)
CP-V: Vertical flow model designed for three or four
stages of filtration
CP-H: Complete fan packaged model with three stages of
filtration.
Both “C-Mist” and “C-Pack” may be single or multistage
Available in galvanized, stainless steel or painted finish (custom colors available upon request)
Optional Features of Any Flanders / Air Seal Product
•
•
•
•
•
•
•
•
•
•
Mixing Plenums
Weatherproofing
Foilback Insulation
High Pressure
High Temperature
Epoxy Coated
Bottom Access
Vertical Flow
Seam Welded
Stitch Welded
•
•
•
•
•
•
•
•
Bolt Together
Construction
Sheet Metal Screw
Construction
Coils / Humidifiers
Special Flanging
Trip-Lock Latches
Nurl-Knob Latches
Vent Lock Latches
Mount Gages
•
•
•
•
•
Motor Starters/ Disconnects
Dampers
Curb Skirts
Transitions
Send us an official drawing or a rough sketch. We’ll
provide a submittal drawing,
specifications, and price.
Flanders has the Filters,
Housings and Holding Frames to
Meet All of Your Filtration Needs!
Represented by:
Flanders / Air Seal
531 Flanders Filters Road
Washington, NC 27889
Phone: 252-946-8081
Toll Free: 1-800-637-2803
Fax: 252-946-3425
Flanders / Air Seal
2502 Wehring Road
Rosenberg, TX 77477
Phone: 281-232-1748
Fax: 281-232-4739
Flanders / Air Seal Printed in USA 10/2008
www.flanderscorp.com
Flanders / Air Seal continues to research and develop product improvements and
reserves the right to change product designs and specifications without notice.