EDGE EV6A
E V O L U T I O N
LED Recessed Linear with
Satine Lens
Project Name
Date
Catalog Number
Type
CONSTRUCTION Extruded aluminum trim with formed cold rolled 20 gauge steel back box housing. Highly reflective
die-formed white painted steel reflector, .125” (3.2mm) white snap-in acrylic lens with matte finish, removable for
maintenance.
ELECTRICAL Electronic, 120 to 277 volt input and 36V output. 0-10 volt dimming standard. Must specify 1D in circuiting
for dimming.
LED All luminaire configurations tested in accordance with IES LM-79. Diodes tested in accordance with IES LM-80.
R9≥20, 27K is CRI≥90, 30K, 35K, and 40K is CRI≥82. Minimum lifetime greater than 60,000 hours.
MOUNTING Edge is designed to install into acoustical grid and inaccessible ceilings. Specify GXG, FLF, SFS, NFN for
individual, unjoinable units (individual units will fall on-grid). Specify GX, FL, SF, NF for continuous runs (runs designed
to fall on-grid). Grid retention brackets are integral to housing. Each housing contains 4 grid retention brackets. Consult
factory for detailed installation instructions.
FINISH Standard powder-coat textured white, metallic silver, textured black, graphite or bronze painted finish, consult
factory for chip of standard paint finishes. Contact factory for additional custom color and finish options.
WARRANTY Edge LED offered with a 5-year limited warranty. Covers LED, driver and fixture.
LABELS IC Rated, UL and cUL Listed, approved for dry/damp location unless otherwise noted.
YEAR LED
WARRANTY
5-3/4”
5-3/4
(146.1mm)
Daylight
Sensor
MR16
Corners
LFL
Convertible
LED
(146.1m
LED
Convertible
YEAR LED
WARRANTY
LFL
1”
5” (127mm)
LFL Grid: 5-13/16” (147.6mm)
LED
Convertible
Convertible
FL: 6-1/8”
LED (155.6mm)
LFL
L U M I N A I R E S P E C I F I C AT I O N
5” (127mm)
Grid: 5-13/16” (147.6mm)
FL: 6-1/8” (155.6mm)
Sample Catalog #: EV6A-30-24’-FL-120-1C-W
EV6A-
____-
___’-
___-
HOUSING
COLOR/LUMENS
LENGTH
MOUNTING
___-
__-
YEAR LED
WARRANTY
VOLTAGE
1
LFL
Convertible
EV6A- Edge
Evolution 6,
Satine Lens
(25.4mm)
LED
CIRCUITING
LED
__-
____
FINISH
OPTIONS
5-3/4”
Convertible
(146.1mm)
LFL
1C- Single Circuit
1D- Single Circuit Dimming5
1B- Single Circuit with
Battery Pack5,6
5” (127mm)
1E- Single Cirtuit with
Grid: 5-13/16” (147.6mm)
Emergency Circuit
Lamps
FL: 6-1/8” (155.6mm)
3
Individual Units (CANNOT BE JOINED)2
Continuous Runs
xx’- SpecifyLFL
row length to 1’ increments
LED
Acoustical Grid Ceiling13
Convertible
ConvertibleG1G- 1” (25.4mm) Ceiling Grid
(Utilize
Illuminated
[EI]
or
Non-Illuminated
27K Color Temperature Lumen Options
LED
LFL
[EN] Extension in the Options section to G9G- 9/16” (14.3mm) Ceiling Grid
Staggered
27- 27K, 370 lumens/ft (5.2
watts/ft)
Lamps
specify rows to 1/8” increments)
GBG- 9/16” (14.3mm) Ceiling Grid with Bevel Trim
27HO- 27K, Installation
673 lumens/ft (10.1 watts/ft)
Instructions
GSG- Screw Slot Ceiling Grid
30K Color Temperature Lumen Options
Inaccessible Ceiling
30- 30K, 450 lumens/ft (5.2 watts/ft)
FLF- Standard 1/2” (12.7mm) Flange5-3/4”
30HO- 30K, 819 lumens/ft (10.1 watts/ft)
(146.1mm)
W- Matte White
SFS- Spackle Flange
35K Color Temperature
Lumen
Options
4
S- Metallic Silver
NFN- Flangeless
Year LED
35- 35K, 470
lumens/ft (5.2 watts/ft)
Warranty
BL- Textured Black
Continuous Runs (JOINABLE)3
35HO- 35K, 855 lumens/ft (10.1 watts/ft)
GR- Graphite
13
Acoustical Grid Ceiling
BR- Bronze
G1- 1” (25.4mm) Ceiling Grid
40K Color Temperature Lumen Options
LFL
LED
5” (127mm)
CC- Custom Color
G99/16”
(14.3mm)
Ceiling
Grid
40- 40K,
482
lumens/ft
(5.2
watts/ft)
Convertible
Convertible
5-13/16”
(147.6mm)
LED
LFL
GB- 9/16”Grid:
(14.3mm)
Ceiling
Grid with Bevel Trim
40HO- 40K, 877 lumens/ft
(10.1 watts/ft)
6-1/8”
(155.6mm)
GS- Screw FL:
Slot
Ceiling
Grid
Custom Output
Inaccessible Ceiling
CL_____- Specify color temp. and lumens/ft. (i.e. CL35600)
FL- Standard 1/2” (12.7) Flange
CW____- Specify color temp. and wattage/ft. (i.e. CW407.5)
SF- Spackle Flange
(Specify lumens/watts between standard offering listed above.
NF- Flangeless4
Lumens are specified per color temp.)
Individual Units2
2- 2’, 23” (584.2mm) fixture2
3- 3’, 35” (889mm) fixture2
4- 4’, 47” (1193.8mm) fixture2
6- 6’, 71” (1803.4mm)
fixture2
YEAR LED
WARRANTY 2
Staggered8- 8’, 95” (2413mm) fixture
120- 120 V
277- 277 V
UNV- UNV
(120-277)
QSCPMRFLMRFXLEDMRA-
Quick Ship12
Chicago Plenum
Fixed MR16 Halogen9
Fixed MR16 LED9
Fixed Xicato LED9
Adjustable MR16
Halogen9
LMRA Adjustable MR16 LED9
PMPerimeter Mount7
RCRotating Crossbar8
EV6CH- 90° Horizontal Corner10
EV6CI- 90° Inside Corner10
EV6CO- 90° Outside Corner10
EI__- Factory Installed
Illuminated Extension11
EN__- Factory Installed NonIlluminated Extension13
See back page for mounting detail. 2Individual units cannot be joined. All end trims are factory installed and cannot be removed in the field. 3Continuous Rows made up of both even and odd length
fixtures. Designed to fall on-grid. 4NF and NFN to be utilized for metal pan / millwork ceiling. 5Some Edge configurations will not accommodate all electrical options. Consult factory. 6Integral battery packs
with remote test switch are provided with 1B option. 7Available for acoustical grid ceilings. Wall rail painted white unless otherwise specified. 81/2” to 5/8” drywall thickness. Available for standard 1/2”
flange (FL). 9Consult MR16 Resource Guide for configurations using MR16 units. 10See EV6 Corner Specification sheets for more information. 11Use “__” to specify desired length. Minimum length is 3”.
Sample part number EV6A-27-24-G1-120-1C-W-EI4 for order a 24’-4” run. 12Includes EV3A, 4 ft individual, unjoinable units, G1G and FLF mounts, universal voltage, std white finish, 1C and 2C circuiting.
13
Use “__” to specify desired length. Minimum length is .5”. Sample part number EV6A-27-24-G1-120-1C-W-EN2 for order a 24’-2” run. 14 See page 3 for grid retention bracket details.
1
®
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO 80239
Phone 303.322.5570
Fax 303.322.5568 www.pinnacle-ltg.com
© 2016 Pinnacle Architectural Lighting®
July 2016
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.
PHOTOMETRY
EDGE EVOLUTION
EV6C, EV6D
765
2'
1383
23" (584.2mm)
574
1045
383
(1) lens per 2'191
unit
Side View
697
348
35" (889mm)
71” (1803.4mm) or 72” (1828.8mm)
6'
3'
(1) lens per 3' unit
(1) lens per 6' unit
47” (1193.8mm) or 48” (1219.2mm)
95” (2413mm) or 96” (2438.4mm)
4'
8'
Test #:
ITL82394
Test #: ITL82395
(1) lens per 8' unit
(1) lens per 4' unit
Part #: EV6A-40-4’
Part #: EV6A-40HO-4’
1Acoustical Grid Ceiling and Inaccessible Ceilings available as individual units or continuous rows. Individual units and rows are available for on-grid installation with acoustical ceilings.
Lumens per watt: 94
Lumens per watt: 87
Total Delivered Lumens: 1,927
Total Delivered Lumens: 3,507
EV6A, EV6H, EV6AL
INDIVIDUAL AND CONTINUOUS RUN MODULES 1
23" (584.2mm)
Side View
2'
(1) lens per 2' unit
3'
35" (889mm)
(1) lens per 3' unit
4'
71” (1803.4mm) or 72” (1828.8mm)
6'
(1) lens per 6' unit
47” (1193.8mm) or 48” (1219.2mm)
95” (2413mm) or 96” (2438.4mm)
8'
(1) lens per 8' unit
(1) lens per 4' unit
1Acoustical Grid Ceiling and Inaccessible Ceilings available as individual units or continuous rows. Individual units and rows are available for on-grid installation with acoustical ceilings.
MOUNTING
DETAILS
EV6P
1” Grid Mounting Options
9/16” Grid Mounting
Side ViewsOptions
48”, 72”, 96”
23"
Screw Slot
Mounting
23”, 35”, 47”, 71”, 95”
2'
(1) louver per 2' unit
35"
71” or 72”
6'
3'
(1) louver per 3' unit
(2) louvers per 6' unit
1” Grid, Standard Tile:
Grid, Tegular Tile: 9/16” Grid, Standard Tile: 9/16” Grid, Tegular Tile: 9/16” Grid, Tegular Tile:
Screw Slot Grid:
47” or1”48”
95” or 9/16”
96” Grid, Tegular Tile:
Use G1 or G1G in part # Use G1 or G1G in part # Use G9 or G9G in part # Use G9 or G9G in part # Use GB or GBG in part # Use GS or GSG in part # Use GS or GSG in part #
4'
8'
(2) louvers per 8' unit
(1) louver per 4' unit
INACCESSIBLE
MOUNTING
SPECIALTY MOUNTS
1Acoustical Grid Ceiling andCEILING
Inaccessible Ceilings available as individual units or continuous rows. Individual units and rows are available for on-grid installation with acoustical ceilings.
Flange Detail
Non-Flange
Spackle Flange
Exposed Flange Detail:
Metal Pan or Millwork:
Drywall, Flangeless Look:
Specify FL or FLF in part # Specify NF or NFN in part # Specify SF or SFS in part #
MR16 LAMP
APPLICATION: MR16’s are ideal for conference rooms,
corridors, wall washing, retail spaces and training facilities where accent lighting is required.
Perimeter Mount
Rotating Crossbar
Bracket and Wall Rail:
Specify PM in part #
Unavailable Structure Support:
Specify RC in part #
ELECTRICAL: Standard 50 watt max halogen lamp transformer (120v
or 277v), 60 watt max LED electronic transformer (120v or 277v). MR16
installed as independent circuit. MR16 voltage to match LED voltage.
LABELS: UL and cUL Listed, approved for dry/damp location unless othTECHNICAL: MR16 fully enclosed compartment elimierwise noted.
nates light from entering into other fixture areas. Availin 20, 35 and 50 watt halogen lamps, up to9/16”
12 watt
ORDERING
INFORMATION: MR16’s should be specified
utilizing
1” Grid Mounting able
Options
Grid Mounting
Options
Screw Slot
LED lamps (lamps not included). Consult factory for other lamp types/ wattages.
MR16 layout guide.
Mounting
®
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO 80239
Phone 303.322.5570
Fax 303.322.5568 www.pinnacle-ltg.com
© 2016 Pinnacle Architectural Lighting®
July 2016
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.
1” Grid, Standard Tile:
1” Grid, Tegular Tile:
9/16” Grid, Standard Tile: 9/16” Grid, Tegular Tile: 9/16” Grid, Tegular Tile: 9/16” Grid, Tegular Tile:
Screw Slot Grid:
GRID RETENTION BRACKET
EDGE EVOLUTION
Joint holes
Joint for
holes
#8-32
for #8-32
ScrewsScrews
GRID RETENTION: At every
joint, the addition of grid
retention brackets results in
a sturdy connection between
the fixtures and the grid.
Insert screws through the
bracket into the grid to
secure.
JOINT ALIGNMENT: Incorporating biscuits and screws
not only creates a secure
joint but also aids in fixture
alignment.
BiscuitBiscuit
®
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO 80239
Phone 303.322.5570
Fax 303.322.5568 www.pinnacle-ltg.com
© 2016 Pinnacle Architectural Lighting®
July 2016
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.