HMC444LP4

advertisement
HMC444LP4
v01.0604
MICROWAVE CORPORATION
SMT GaAs HBT MMIC x8 ACTIVE
FREQUENCY MULTIPLIER, 9.9 - 11.2 GHz OUTPUT
Typical Applications
Features
Active Multiplier for X Band Applications:
Output Power: +6 dBm
• Fiber Optic
Sub-Harmonic Suppression: >25 dBc
• Pt to Pt Radios
SSB Phase Noise: -136 dBc/Hz
• Military Radar
Single Supply: +5V@ 68 mA
16 mm2 Leadless SMT Package
FREQ. MULTIPLIERS - SMT
11
Functional Diagram
General Description
The HMC444LP4 is an active miniature x8 frequency
multiplier utilizing InGaP GaAs HBT technology in a
4 mm x 4 mm leadless surface mount package.
Power output is +6 dBm typical from a 5.0V supply
voltage and varies little vs. input power, temperature
and supply voltage. Suppression of undesired
fundamental and sub-harmonics is >25 dBc typical
with respect to output signal level. The low additive
SSB phase noise of -136 dBc/Hz at 100 kHz
offset helps the user maintain good system noise
performance. The HMC444LP4 is ideal for use in
LO multiplier chains allowing reduced parts count
vs. traditional approaches.
Electrical Specifications, TA = +25° C, Vcc= 5.0V
Parameter
Min.
Frequency Range, Input
Frequency Range, Output
Input Power Range
3
Max.
Units
1.2375 - 1.40
GHz
9.9 - 11.2
GHz
-15
Output Power
+5
dBm
6
dBm
Sub-Harmonic Suppression
25
dBc
Input Return Loss
22
dB
Output Return Loss
7
dB
-136
dBc/Hz
68
mA
SSB Phase Noise (100 kHz Offset)
Supply Current (Icc)
11 - 58
Typ.
Pin= 0 dBm
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
HMC444LP4
v01.0604
MICROWAVE CORPORATION
SMT GaAs HBT MMIC x8 ACTIVE
FREQUENCY MULTIPLIER, 9.9 - 11.2 GHz OUTPUT
10
10
9
9
8
8
OUTPUT POWER (dBm)
7
6
5
4
3
+25 C
+85 C
-40 C
2
1
0
9.6
7
6
5
4
-20 dBm
-15 dBm
-10 dBm
-5 dBm
0 dBm
+5 dBm
3
2
1
10
10.4
10.8
11.2
0
9.6
11.6
GHz
10
OUTPUT FREQUENCY (GHz)
10.4
10.8
11
11.2
11.6
OUTPUT FREQUENCY (GHz)
Output Power vs.
Supply Voltage @ -10 dBm Drive Level
Input Return Loss vs. Temperature
10
0
INPUT RETURN LOSS (dB)
7
6
5
4
3
Vcc=4.5V
Vcc=5.0V
Vcc=5.5V
2
1
0
9.6
+25 C
+85 C
-40 C
-5
8
-10
-15
-20
-25
-30
-35
10
10.4
10.8
11.2
11.6
0
0.5
1
OUTPUT FREQUENCY (GHz)
1.5
2
FREQUENCY (GHz)
Output Return Loss vs. Temperature
2.5
3
0
OUTPUT RETURN LOSS (dB)
OUTPUT POWER (dBm)
9
FREQ. MULTIPLIERS - SMT
OUTPUT POWER (dBm)
Output Power vs.
GaAs MMIC
SUB-HARMONICALLY
PUMPED
MIXER
- 25
Output
Power
vs. Drive17
Level
Temperature
@ -10 dBm
Drive Level
-5
-10
+25 C
+85 C
-40 C
-15
-20
8
9
10
11
12
13
14
15
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
11 - 59
HMC444LP4
v01.0604
MICROWAVE CORPORATION
SMT GaAs HBT MMIC x8 ACTIVE
FREQUENCY MULTIPLIER, 9.9 - 11.2 GHz OUTPUT
SSB Phase Noise
Performance, Fout= 10.5 GHz
Output Spectrum
10
Pin= 0dBm
Pin= -10dBm
SSB PHASE NOISE (dBc/Hz)
11
OUTPUT POWER (dBm)
0
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
-100
-110
-120
-130
-140
-150
2
10
-10
-20
-30
-40
-50
-60
0
2
4
6
8
10
12
14
16
20
22
24
26
10
3
10
4
10
5
10
OFFSET FREQUENCY (Hz)
FREQ. MULTIPLIERS - SMT
FREQUENCY (GHz)
18
11 - 60
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
6
10
7
MICROWAVE CORPORATION
HMC444LP4
v01.0604
SMT GaAs HBT MMIC x8 ACTIVE
FREQUENCY MULTIPLIER, 9.9 - 11.2 GHz OUTPUT
Absolute Maximum Ratings
Typical Supply Current vs. Vcc
Vcc (V)
Icc (mA)
+6.0V
4.5
66
Storage Temperature
-65 to +150 °C
5.0
68
Operating Temperature
-40 to +85 °C
5.5
70
RF Input (Vcc= +5V)
+20 dBm
Vcc
11
FREQ. MULTIPLIERS - SMT
Note: Multiplier will operate over full voltage range
shown above.
Pin Locations & Outline Drawing
NOTES:
1. MATERIAL PACKAGE BODY: LOW STRESS INJECTION MOLDED
PLASTIC SILICA AND SILICON IMPREGNATED.
2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY
3. LEAD AND GROUND PADDLE PLATING: Sn/Pb SOLDER
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
6. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
7. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
8. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
9. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB
LAND PATTERN.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
11 - 61
MICROWAVE CORPORATION
HMC444LP4
v01.0604
SMT GaAs HBT MMIC x8 ACTIVE
FREQUENCY MULTIPLIER, 9.9 - 11.2 GHz OUTPUT
Pin Description
FREQ. MULTIPLIERS - SMT
11
11 - 62
Pin Number
Function
Description
1, 2, 5-14, 17,
18, 20-24
N/C
No Connection
3
RF IN
RF input needs to be DC blocked only if there is an
external DC voltage applied to RF IN.
4, 15
GND
All ground leads and ground paddle must be soldered
to PCB RF/DC ground.
16
RF OUT
Multiplied Output. AC coupled. No external DC blocks
necessary.
19
Vcc
Supply voltage 5V ± 0.5V.
Interface Schematic
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
MICROWAVE CORPORATION
v01.0604
HMC444LP4
SMT GaAs HBT MMIC x8 ACTIVE
FREQUENCY MULTIPLIER, 9.9 - 11.2 GHz OUTPUT
Evaluation PCB
The circuit board used in the final application should be generated with proper RF circuit design techniques.
Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be
connected directly to the ground plane similar to that shown. The evaluation circuit board shown is available from
Hittite upon request.
List of Materials
Item
Description
J1 - J3
PC Mount SMA Connector
C1
1,000 pF Capacitor, 0603 Pkg.
U1
HMC444LP4, x16 Active Multiplier
PCB*
104610 Eval Board
FREQ. MULTIPLIERS - SMT
11
* Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
11 - 63
This datasheet has been download from:
www.datasheetcatalog.com
Datasheets for electronics components.
Download