CMT107ER
PC/104 IDE Drive Peripheral Modules
with Floppy Interface
Operating Temperature -20° to +80°C
Module Versions:
External
Port
Part
Number
Drive
Type
IDE
Port
Floppy
Port
CMT106ER
TBD
-
-
-
-
-
TBD
1
1
-
1
1
CMT6106HR
CMT107ER
CMT6107HR
Features:
ISA
(PC104)
IDE
Connector
Configuration Jumpers
Floppy Connector
CMT107ER with Floppy Interface
Available as a ruggedized IDAN® module
IDAN-CMT107HRS with external Floppy
IDAN-CMT107HRD with external Floppy and
IDE
Provides a compact IDE drive directly in your
PC/104 stack
Decodes the IDE interface from the PC/104 bus
or through connector
Requires no additional IDE controller on
cpuModule™ or VGA module
Protects drive against power supply reversepolarity, over-current, and over-voltage
Slave IDE drive connector
Dual Floppy controller
Rugged IDAN® Configuration
(Single height frame shown with Floppy)
Dual height frame available with Floppy and IDE
Supports:
IDE ATA series 2.5" rotating drives
IDE ATA series 2.5" Flash drives
Description:
Easily add a compact drive to an embedded PC/104 stack with our CMT107ER and CMT6107HR Peripheral
Modules.
The CMT107ER provide a 2.5" IDE drive and floppy interfaces through the PC/104 bus. Protection components
reduce the possibility of drive damage due to reversed power-supply polarity, over-current, or over-voltage.
Physical Attributes: (without drive installed)
Size: 112mm L x 96mm W x 15mm H (4.4"L x 3.8"W x 0.6"H)
Weight: Approximately 0.07 Kg (0.16 lbs.)
Operating Temperature: -20° to +80°C: 90% humidity non-condensing
Storage Temperature: -40° to +85°C
Power requirements 2.8 W @ 5 VDC typical
systerra computer GmbH | Kreuzberger Ring 22 · D-65205 Wiesbaden | Tel: 0611 9748 470