Visual Lighting Technologies
EssentialLEDs
Cut Sheet
Sheet #9Y011
#9W021
Cut
#9W031
#9W011
Drivers, Dimming & Controls
Notes on Dimming and Controls: EssentialLED products can be dimmed using any of the self-contained dimming drivers offered on the following
pages, OR by combining Osram’s 0-10v OT Dimming Module with any of our electronic drivers. All self-contained dimming drivers (marked with a red
dot n ) require a Relay Module (AC - PWR - RLY) to reach full “off” position. Magnetic drivers can be dimmed using a standard magnetic low voltage wall
dimmer.
Whether you choose a self-contained dimming driver, or combine a 0-10v dimming module and standard driver, you will need a device to control the
dimming effect. We offer the wall-mount Lutron Diva or a Local Dimming Controller that attaches directly to the driver unit.
1. Control & Interface Accessories
0 - 10v dimming module
specifications
6.77” [172mm]
Dimensions: 6.77” L x 1.65” W x 0.79” H
[172mm L x 42mm W x 20mm H]
Weight: 0.165lbs [74.84 grams]
Nominal Input Voltage: 24
Max.Output Power (W): 120w, 60w each output
Max Output Current per Channel (A): 2.5
Output Frequency (Hz): 135
Input Voltage Range: 9.5 - 25v DC
Dimming Range: 0 - 100%
Control Current: 0.6 mA max.
Temp. Range: 4° to 122°F [-20° to +50°C]
Max. Case Temperature: 158°F [70°C]
Manufacturer: Osram
1.65” [42mm]
lutron diva 0 - 10v control
specifications
Dimensions: 4.69”L x 0.94”W x 0.30”H
4.69” [119mm]
[119mm L x 75mm W x 7.6mm H]
Control: 0 -10v 30 mA
Manufacturer: Lutron
cat. no. ac - pwr - dim
Description: 0 - 10v dimming module from Osram
for use in conjunction with standard electronic
drivers; requires control device. Two outputs of
60w each, 120w max.
See wiring diagram on page 40.
cat. no. ac - pwr - 4wf
Description: Control device from Lutron for
control of 0 - 10v dimming (used in conjunction
with standard electronic driver plus ) or with
self-contained dimming driver. Wall mount
paddle switch with linear slide; uses low-voltage wiring for easy installation. White.
2.94” [75mm]
local dimming controller
specifications
Dimensions: 1.5” Diameter; 4.5” wire lead
[38.1mm Diameter; 114.3 mm wire
lead]
Material: Plastic Case
lutron Relay Module
page 30
cat. no. ac - pwr - KNB
Description: Local dimming knob control device for dimming of 0 - 10v dimming module
(Cat. No. AC - PWR - DIM), used in conjunction
with standard electronic driver or with any selfcontained dimming driver.
cat. no. ac - pwr - RLY
Description: Power Relay Module from Lutron for
use with electronic self-contained 0 - 10v dimming
[95.3mm L x 57.15mm W x 35.05mm H]
drivers; shuts input power to full “off”. See chart opManufacturer: Lutron
posite for applicable drivers.
Dimensions: 3.75” L x 2.25” W x 1.38”H
Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com
Visual Lighting Technologies
Cut Sheet
Sheet #9Y011
#9W021
Cut
#9W031
#9W011
2. Drivers
VLT offers electronic and magnetic drivers of various sizes to complete your LED lighting system. All “Non-Dimming” Electronic drivers can be dimmed with the addition of a 0-10 volt dimming module (AC - PWR - DIM); electronic drivers with self-contained 0 - 10v dimming require Relay Module (AC - PWR - RLY) to reach full “off”
position. Use of a low-voltage magnetic driver with your system allows it to be dimmed using a typical wall-mount lighting control system (i.e. Lutron or others).
ALL DRIVERS are ETL Listed when used as part of an EssentialLEDs Linear or EssentialLEDs Light Panel system.
Wattage
Page 35
LIGHTECH
OSRAM
(International) Page 37
OSRAM
(US, Can, MEX) Page 34
Page 36
MEAN WELL - CLASS 1
Page 33
MEAN WELL - CLASS 2
Page 32
VLT HMLD
All Units
24v DC
Non
Magnetic Self-Contained
Dimming
Dims to
Low-Voltage
0 - 10v
(Needs OT Dim
Zero
Dimming
Dimming
Module)
Requires
Relay
Module
for Full Off
IP Rating & Enclosure
48w
g
g
IP67, Nema 3R Box Included
96w
g
g
IP67, Nema 3R Box Included
3 x 96w
g
g
IP67, Nema 3R Box Included
40w
g
IP67, Requires J-Box
80w
g
IP67, Requires J-Box
100w
g
IP67, Requires J-Box
120w
g
g
IP67, Requires J-Box
150w
g
g
IP67, Requires J-Box
185w
g
g
IP67, Requires J-Box
240w
g
g
IP67, Requires J-Box
320w
g
g
IP67, Requires J-Box
30w
g
g
IP40, Requires J-Box
75w
g
g
IP67, Requires J-Box
96w
g
g
IP67, Requires J-Box
96w /DIM
g
g
On-Cord
Switch
g
IP67, Requires J-Box
20w
g
g
IP40, Requires J-Box
75w
g
g
IP64, Requires J-Box
96w
g
g
IP67, Requires J-Box
240w
g
g
IP67, Requires J-Box
10w
g
g
IP67, Requires J-Box
25w
g
g
IP67, Requires J-Box
60w
g
g
IP67, Requires J-Box
100w
g
g
IP67, Requires J-Box
Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com
page 31