OVERVIEW SOMA
7
Door cabinets lacquer - depth 37, 50 and 67 cm
width
40 cm
50 cm
60 cm
height
80 cm
100 cm
100 cm
120 cm
120 cm
without
with
without
with
middle cheek
middle cheek
middle cheek
middle cheek
160 cm
1R
38,4 cm
_
1 1/2 R
57,6 cm
_
2R
76,8 cm
_
2 1/2 R
96,0 cm
_
3R
115,2 cm
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
100 cm
100 cm
120 cm
Note:
Door cabinets must be equipped with front/side panels/cover boards.
Depth 67 cm cannot be wall hung.
Glass cabinet lacquer - depth 37 and 50 cm
width
40 cm
50 cm
height
60 cm
80 cm
120 cm
without
with
without
with
middle cheek
middle cheek
middle cheek
middle cheek
160 cm
1R
38,4 cm
_
1 1/2 R
57,6 cm
_
2R
76,8 cm
_
2 1/2 R
96,0 cm
_
3R
115,2 cm
_
_
_
_
_
_
Note:
Glass cabinets must be equipped with front/side panels/cover boards.
Front panels (door) of glass cabinets are (back) lacquered on the edge (6 cm wide frame).
_
OVERVIEW SOMA
8
Flap chests lacquer - Hinge at BOTTOM - depth 37, 50 and 67 cm
width
40 cm
50 cm
60 cm
80 cm
height
100 cm
100 cm
120 cm
120 cm
160 cm
without
with
without
with
with
middle cheek
middle cheek
middle cheek
middle cheek
middle cheek
1/2 R
19,2 cm
1R
38,4 cm
1 1/2 R
57,6 cm
_
_
_
Note:
Flap chests must be equipped with front/side panels/cover boards.
Flap chests in height 1 1/2 Raster are only possible in depth 37 and 50 cm.
Depth 67 cm cannot be wall hung.
Flap chests lacquer - Hinge at TOP - depth 37, 50 and 67 cm
width
40 cm
50 cm
60 cm
height
80 cm
100 cm
100 cm
120 cm
120 cm
without
with
without
with
middle cheek
middle cheek
middle cheek
middle cheek
1R
38,4 cm
160 cm
_
Note:
Flap chests must be equipped with front/side panels/cover boards.
Depth 67 cm cannot be wall hung.
Combi carcase lacquer - depth 37, 50 and 67 cm
width
40 cm
50 cm
60 cm
height
80 cm
100 cm
120 cm
160 cm
without
with
without
with
with
middle cheek
middle cheek
middle cheek
middle cheek
Note:
1 drawer on top, 1 flap at bottom
Combi carcases must be equipped with front/side panels/cover boards.
Depth 67 cm cannot be wall hung.
240 cm
120 cm
middle cheek
1 1/2 R
57,6 cm
Sliding door cabinets lacquer - depth 37 and 50 cm
width
160 cm
200 cm
200 cm
height
100 cm
240 cm
with 1
with 1
mit 3
with 1
mit 3
middle cheek
middle cheek
middle cheeks
middle cheek
middle cheeks
1 1/2 R
57,6 cm
2R
76,8 cm
Note:
Sliding door cabinets must be equipped with front/side panels/cover boards.
Pedestal is not possible in depth 37.
OVERVIEW SOMA
9
Chests of drawers lacquer - for depth 37, 50 and 67 cm
width
40 cm
50 cm
60 cm
height
1/2 R
19,2 cm
1 drawer
1R
38,4 cm
1 drawer
1 drawer
1 drawer
80 cm
1 drawer
100 cm
120 cm
160 cm
without
without
with
middle cheek
middle cheek
middle cheek
1 drawer
1 drawer
1 drawer divided
2x width 80 cm
1 drawer
1 drawer
1 drawer
1 drawer
1 drawer
1 drawer divided
2x width 80 cm
2 drawers
2 drawers
2 drawers
2 drawers
2 drawers
2 drawers
2 drawers divided
4x width 80 cm
1 1/2 R
57,6 cm
2R
2 drawers
2 drawers
2 drawers
2 drawers
2 drawers
2 drawers
3 drawers
3 drawers
3 drawers
3 drawers
3 drawers
3 drawers
2 drawers
2 drawers
2 drawers
2 drawers
2 drawers
2 drawers
3 drawers
3 drawers
3 drawers
3 drawers
3 drawers
3 drawers
4 drawers
4 drawers
4 drawers
4 drawers
4 drawers
4 drawers
3 drawers
3 drawers
3 drawers
3 drawers
3 drawers
3 drawers
4 drawers
4 drawers
4 drawers
4 drawers
4 drawers
4 drawers
5 drawers
5 drawers
5 drawers
5 drawers
5 drawers
5 drawers
3 drawers
3 drawers
3 drawers
3 drawers
3 drawers
3 drawers
4 drawers
4 drawers
4 drawers
4 drawers
4 drawers
4 drawers
5 drawers
5 drawers
5 drawers
5 drawers
5 drawers
5 drawers
6 drawers
6 drawers
6 drawers
6 drawers
6 drawers
6 drawers
76,8 cm
2 1/2 R
96,0 cm
3R
115,2 cm
Note:
Chests of drawers must be equipped with front/side panels/cover boards.
Depth 67 cm cannot be wall hung.
Drawer division possible.
CD/DVD profiles possible from carcase height 1 Raster.
OVERVIEW SOMA
10
Niche carcases with shelves lacquer/wood - depth 37 and 50 cm
width
40 cm
50 cm
60 cm
80 cm
height
100 cm
120 cm
_
_
_
_
_
_
_
_
_
1/2 R
19,2 cm
1R
38,4 cm
1 1/2 R
57,6 cm
2R
76,8 cm
2 1/2 R
96,0 cm
3R
115,2 cm
Note:
Niche carcases must be equipped with front/side panels/cover boards.
Niche shelves are necessary for constructive reasons.
Overview niche carcases with position of shelves - depth 37 and 50 cm
width
height
1/2 R
1R
1 1/2 R
40 cm
50 cm
60 cm
80 cm
100 cm
120 cm
*
*
*
*
*
*
*
*
*
2R
*
2 1/2 R
3R
THESE SHELVES ARE OBLIGATORY
FOR CONSTRUCTIVE REASONS!
The grey lines are
alternative or additional
positions of shelves.
Niche shelves for individual
composition are available.
Cover boards and side panels
are also necessary.
OVERVIEW SOMA
11
Front panels glass/lacquer/wood - for depth 37, 50 and 67 cm
width
40 cm
50 cm
60 cm
80 cm
height
100 cm
120 cm
160 cm
1/2 R
19,2 cm
_
_
1R
38,4 cm
_
_
_
_
_
_
_
_
1 1/2 R
57,6 cm
2R
76,8 cm
2 1/2 R
96,0 cm
_
_
_
_
_
_
_
_
_
_
_
_
3R
115,2 cm
Note:
Front panels can be glued or equipped with magnets (swap option - surcharge).
Side panels glass/lacquer/wood - for depth 37, 50 and 67 cm
depth
37 cm
50 cm
67 cm
height
1/2 R
19,2 cm
_
_
_
_
_
_
1R
38,4 cm
_
_
_
_
_
_
1 1/2 R
57,6 cm
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
2R
76,8 cm
2 1/2 R
96,0 cm
3R
115,2 cm
Note:
Side panels can be glued or equipped with magnets (swap option - surcharge).
OVERVIEW SOMA
12
Cover boards glass/lacquer/wood - for carcases in depth 37, 50 and 67 cm
width
40 cm
50 cm
60 cm
80 cm
carcase
100 cm
120 cm
160 cm
cover board
Note:
cover boards always necessary
a continuous cover board is available up to width 360 cm for linked carcases
Alucobond, grey felt, grey glass mirror and raw oak ONLY available up to 280 cm width.
Plinth boards lacquer/wood - for carcases in depth 37, 50 and 67 cm
width
40 cm
50 cm
60 cm
80 cm
carcase
100 cm
120 cm
160 cm
plinth
board
Note:
Each carcase needs own plinth board
Plinth boards lacquer/wood - for sliding door cabinets in depth 37 and 50 cm
width
160 cm
200 cm
240 cm
carcase
plinth
board
Note:
Each carcase needs own plinth board. Only available in graphite, black, peat and mocca.
Wall mounting kit - for carcases in depth 37 and 50 cm
width
40 cm
50 cm
60 cm
carcase
80 cm
wall
mounting kit
Note:
Each carcase needs own wall mounting kit.
depth 67 cm cannot be wall-hung.
Wall mounting kit - for sliding door cabinets in depth 37 and 50 cm
width
160 cm
200 cm
240 cm
carcase
wall
mounting kit
Note:
Each carcase needs own wall mounting kit.
100 cm
120 cm
160 cm
OVERVIEW SOMA
13
Interior - for carcases in depth 37, 50 and 67 cm
width
40 cm
50 cm
60 cm
carcase
80 cm
100 cm
100 cm
120 cm
120 cm
160 cm
without
with
without
with
with
middle cheek
middle cheek
middle cheek
middle cheek
middle cheek
(2x width 60 cm)
(2x width 80 cm)
(2x width 50 cm)
glass shelf
wood shelf
perforated
sheet
bottom plate
_
_
rear wall
mirror
_
interior
drawer
_
pull-out
shelf
_
CD profile
DVD profile
_
_
Inserts for drawers - for carcases ONLY in depth 50 cm/from width 40 cm
bottom plate
waves
cutlery
12 compartm.
Cable ducting - for carcases in depth 37, 50 and 67 cm
width
40 cm
50 cm
60 cm
carcase
horizontal
cable duct
vertical
cable duct
cutout in
cover board
10 compartm.
coffee
capsules
wine
watches
jewel case
80 cm
100 cm
100 cm
120 cm
120 cm
without
with
without
with
with
middle cheek
middle cheek
middle cheek
middle cheek
middle cheek
(2x width 60 cm)
(2x width 80 cm)
_
_
_
cutout in
cover board
electric
junction box
plug
cover
_
_
_
_
_
cable cover
KABL
cable cover
KABL.S
ventilation
grid
Electric Accessories/Illumination - for carcases in depth 37, 50 and 67 cm
interior
interior
illumination
illumination
with rech. battery
transformer
remote socket
infra-red
control
eye
with foot
160 cm
cable box
24 cm
40 cm
backside
backside
transformer
illumination
illumination
with control box
LED-Band
RGB-LED-Band
OVERVIEW SOMA
14
Panel system 90K lacquer/wood
width
100 cm
120 cm
height
1 1/2 R
57,6 cm
_
_
2R
76,8 cm
_
_
140 cm
160 cm
180 cm
200 cm
220 cm
240 cm
260 cm
280 cm
_
_
_
_
_
_
_
_
2 1/2 R
96,0 cm
3R
115,2 cm
3 1/2 R
172,8 cm
Note:
Several wood panels can be mounted on top of each other.
A continuous mounting frame will then be supplied.
Electric Accessories/Illumination - for panel system 90K
panel
panel
transformer
infra-red
illumination
illumination
with control box
eye
LED stripe
RGB-LED stripe
installed in panel
screen holder
OVERVIEW SOMA
15
Pedestal - depth 37, 50 and 67 cm
cheek height
14 cm
23 cm
for total width of carcase
110 cm - 210 cm
at least 2 cheeks are necessary
at least 2 cheeks are necessary
220 cm - 240 cm
at least 2 cheeks and 1 supporting foot are necessary
at least 2 cheeks and 1 supporting foot are necessary
250 cm - 320 cm
330 cm - 360 cm
at least 3 cheeks are necessary
at least 3 cheeks are necessary
(middle cheek can be replaced by supporting foot)
(middle cheek can be replaced by supporting foot)
at least 4 cheeks are necessary
at least 4 cheeks are necessary
(middle cheeks can be replaced by 2 supporting feet)
(middle cheeks can be replaced by 2 supporting feet)
Remark:
Further cheeks can additionally be used.
Please state finish of cheeks.
Pedestal frames only available in colour aluminium.
The lateral cheeks should have a max. distance to the side of carcase of 40 cm (min. 17 cm).
The max. distance between two cheeks may not exceed 120 cm.
OVERVIEW SOMA
16
Drawer division for exterior drawer - depth 37 cm
for carcase width
40 cm
50 cm
SETS
60 cm
80 cm
100 cm
120 cm
160 cm
(2x80 bottom plate)
Set Q
SGB.32.23+SG1.Q.23
SGB.42.23+SG1.Q.23
SGB.52.23+SG1.Q.23
SGB.72.23+SG1.Q.23
SGB.92.23+SG2.Q.23
SGB.112.23+SG2.Q.23
SGB.152.23+SG2.Q.23
SGB.32.23+SG1.H.23
SGB.42.23+SG1.H.23
SGB.52.23+SG1.H.23
SGB.72.23+SG1.H.23
SGB.92.23+SG2.H.23
SGB.112.23+SG2.H.23
SGB.152.23+SG2.H.23
SGB.32.23+SG1.V.23
SGB.42.23+SG1.V.23
SGB.52.23+SG1.V.23
SGB.72.23+SG1.V.23
SGB.92.23+SG2.V.23
SGB.112.23+SG2.V.23
SGB.152.23+SG2.V.23
square
division
Set H
horizontal
division
Set V
vertical
division
Drawer division for exterior drawer - depth 50 cm
for carcase width
40 cm
50 cm
SETS
60 cm
80 cm
100 cm
120 cm
160 cm
(2x80 bottom plate)
Set Q
SGB.32.36+SG1.Q.36
SGB.42.36+SG1.Q.36
SGB.52.36+SG1.Q.36
SGB.72.36+SG1.Q.36
SGB.92.36+SG2.Q.36
SGB.112.36+SG2.Q.36
SGB.152.36+SG2.Q.36
SGB.32.36+SG1.H.36
SGB.42.36+SG1.H.36
SGB.52.36+SG1.H.36
SGB.72.36+SG1.H.36
SGB.92.36+SG2.H.36
SGB.112.36+SG2.H.36
SGB.152.36+SG2.H.36
SGB.32.36+SG1.V.36
SGB.42.36+SG1.V.36
SGB.52.36+SG1.V.36
SGB.72.36+SG1.V.36
SGB.92.36+SG2.V.36
SGB.112.36+SG2.V.36
SGB.152.36+SG2.V.36
square
division
Set H
horizontal
division
Set V
vertical
division
Drawer division for exterior drawer - depth 67 cm
for carcase width
40 cm
50 cm
SETS
60 cm
80 cm
100 cm
120 cm
160 cm
(2x80 bottom plate)
Set Q
SGB.32.51+SG1.Q.51
SGB.42.51+SG1.Q.51
SGB.52.51+SG1.Q.51
SGB.72.51+SG1.Q.51
SGB.92.51+SG2.Q.51
SGB.112.51+SG2.Q.51
SGB.152.51+SG2.Q.51
SGB.32.51+SG1.H.51
SGB.42.51+SG1.H.51
SGB.52.51+SG1.H.51
SGB.72.51+SG1.H.51
SGB.92.51+SG2.H.51
SGB.112.51+SG2.H.51
SGB.152.51+SG2.H.51
SGB.32.51+SG1.V.51
SGB.42.51+SG1.V.51
SGB.52.51+SG1.V.51
SGB.72.51+SG1.V.51
SGB.92.51+SG2.V.51
SGB.112.51+SG2.V.51
SGB.152.51+SG2.V.51
square
division
Set H
horizontal
division
Set V
vertical
division
Remark:
Bottom plate is black (lacquered) which comes with drillings for pins.
Stripes are placed between two pins.
Stripes are available in anodized black aluminium or black cardboard.
Sets for individual composition are available.
(pack of 10 pins; pack of 5 stripes in different lengths)