Sight Glass Level Gauges
advertisement
Level Measurement Sight Glass Level Gauges KSR KUEBLER AG Data Sheet Sight Glass Level Gauges Description Level Gauges for direct reading of Iiquid levels in vessels and tanks. Applications ■■ Refineries ■■ Off-shore ■■ Oil and gas ■■ Power stations ■■ Chemical plants ■■ Thermofluid oil installations ■■ Refrigerating plants ■■ Cyrogenic services Rating ■■ Pressure rating PN 6 – 250 ■■ Operating temperatures from – 200 up to + 400 °C Product groups ■■ Reflex type ■■ Transparent type with glass or mica ■■ Refraction type ■■ Tubular type Accessories ■■ Drain and vent ■■ Illumination ■■ Heating ■■ Scale ■■ Frost protection ■■ Ultraviolet protection ■■ Corrosion protection ■■ Lining/coating PTFE/Halar, rubber Certificates ■■ Test certificates according to DIN EN 10204 ■■ Sour gas regulation NACE ■■ Tests to customers requirements Neccessary data Glass type, Design pressure (p), Design temperature (T), center to center distance (ME), visible length (SL), materials, process connection, ex classification, quantity Special constructions available upon request. For further details please use our datasheets. Chambers ■■ fixed, flanged, pivoted, screwed or weldable ■■ interrupted or continuous visible length Materials ■■ Forged steel, stainless steel, suitable for pressure equipment according to EN or ASME ■■ Particularly corrosion resistant materials as Duplex, Monel, Inconel, Hastelloy, Titanium, etc. Shut-off valves ■■ handwheel or quick closing lever ■■ with ball check ■■ flanged or union connection KSR KUEBLER AG Data Sheet Sight Glass Level Gauges ∙ 06/2013 Page 1 of 56 Sight Glass Level Gauges Type Overview BasicType Pressure rating Body type Connection Gauge valve Internal connection Actuation 700.12 CL 300 reflex, transparent side-side fixed 760.51..52 nipple handwheel 8 700.12A CL 900 reflex, transparent side-side fixed 760.51..52 nipplel handwheel 9 700.13 CL 300 reflex, transparent side-side fixed 760.56..57 nipple Schnellschluss offset 10 700.13A CL 600 reflex, transparent side-side fixed 760.56..57 nipple Schnellschluss offset 11 700.21 CL 300 reflex, transparent top-bottom pivoted 760.53 nipple handwheel offset 12 700.21A CL 900 reflex, transparent top-bottom pivoted 760.53 nipple handwheel offset 13 700.23 CL 300 reflex, transparent top-bottom pivoted 760.58 nipple Schnellschluss offset 14 700.23A CL 600 reflex, transparent top-bottom pivoted 760.58 nipple Schnellschluss offset 15 700.26 CL 1500 reflex, transparent side-side fixed 760.51..52 nipple handwheel 700.27 CL 1500 reflex, transparent top-bottom pivoted 760.53 nipple handwheel 700.46 CL 300 reflex, transparent large chamber top-bottom without/with 18 700.31 CL 300 reflex, transparent open back, bridge-weld pad without 19 700.B1 CL 300 reflex, side plates hingedr side-side fixed integrated rigid handwheel 20 700.B3 PN 40 reflex top-bottom integrated rigid handwheel 21 700.B5 PN 40 reflex, side plates hinged top-bottom 760.11 nipple lever 23 700.B7 PN 40 reflex, pressure frame 15° diagonally backside 760.11 nipple lever 24 700.C0 PN 40 transparent backside integrated rigid handwheel 25 700.C4 PN 63 transparent backside integrated rigid handwheel 26 700.C5 PN 100 transparent backside 760.68 union lever 27 700.C6 up to CL 600 reflex, transparent side-side fixed 760.18 flanged handwheel + lever 700.C7 PN 100 red-green backside 760.68 nipple handwheel 700.C8 PN 160 refraction, mica backside 760.18 nipple handwheel + lever double shut-off 30 700.CA CL 1500 refraction, mica backside 760.19 nipple handwheel + lever double shut-off 31 700.A1 PN 10 glass tube 13,5 mm, steel, glass protection top-bottom pivoted screwed handwheeld 32 700.A2 PN 10 glass tube 13,5 mm, Ms, glass protection top-bottom pivoted screwed handwheel 33 700.A3 PN 10 glass tube 13,5 mm, SS, glass protection top-bottom pivoted screwed handwheel 34 700.A4 PN 10 glass tube 13,5 mm, SS, glass protection top-bottom pivoted without screwed 700.01 CL 150 glass tube 16 mm, glass protection, ZGH*) top-bottom pivoted 760.01 screwed handwheel offset 36 700.03 CL 150 glass tube 16 mm, glass protection, ZGH*) top-bottom pivoted 760.03 screwed lever offset 37 Special Page 16 offset double shut-off 17 28 29 35 *) GH = Glass holder in-between Page 2 of 56 KSR KUEBLER AG Data Sheet Sight Glass Level Gauges ∙ 06/2013 Valves Type Overview Type Pressure rating Actuation Connection body Thruway Pattern Stem thread 760.51 CL 1500 handwheel nipple straight inline inside 38 760.52 CL 1500 handwheel nipple angle inline inside 39 760.53 CL 1500 handwheel nipple angle offset inside 40 760.56 CL 600 quick closing valve nipple straight inline inside 41 760.57 CL 600 quick closing valve nipple Eck inline inside 42 760.58 CL 600 quick closing valve nipple angle offset inside 43 760.01 CL 1500 handwheel nipple angle offset inside 44 760.03 CL 600 quick closing valve nipple angle offset inside 45 760.11 CL 300 quick closing valve nipple angle inline inside 46 760.18 CL 900 handwheel / lever nipple angle inline inside 47 760.19 CL 1500 handwheel / lever nipple angle inline inside 48 760.68 CL 600 quick closing valve nipple straight inline inside 49 Page Sight Glass Level Gauges Accessories Type Description 709.0XXX Illumination Transparent Sight Glass Level Gauges 50 Sight Glass Level Gauges Connections 51 Frost protection / Flat glasses / Gaskets 52 Mica and gasket / Mica packages PDESIGN / Corrosion protection / Pointer low water 53 Corrosion protection with mica / Corrosion protection and anti-adhesive / Scale / Heating 54 KSR KUEBLER AG Data Sheet Sight Glass Level Gauges ∙ 06/2013 Page Page 3 of 56 Functional Description Sight Glass Level Gauges Reflex glass type acc. to DIN 7081 Incident light is reflected at the reflex grooves of the sight glass plate covered by gas and is broken into the liquid in the part covered by medium. The liquid level is visible as a dark bar, the gaseous space as a silvery bar. Sight direction Gaseous phase Sight direction Liquid phase Transparent glass type acc. to DIN 7081 Incident light is reflected at the reflex grooves of the sight glass plate covered by gas and is broken into the liquid in the part covered by medium. The liquid level is visible as a dark bar, the gaseous space as a silvery bar. Sight direction acc. to DIN 7081 Refraction type with mica sheets The incident light of a lamp is guided through the two mica sheet packages in an angle and passes the medium between them. In gaseous phase the light is guided straight forward and passes both mica packets, in liquid the light is refracted away. The liquid level is visible as a black bar and the gas as a bright bar. Sight direction Refraction type with mica sheets Page 4 of 56 KSR KUEBLER AG Data Sheet Sight Glass Level Gauges ∙ 06/2013 Design Sight Glass Level Gauges The main part of the sight glass level gauge is the chamber. A duct for the medium (or heating agent) is machined into the gauge body as well as the support surfaces for the gaskets and glasses or micas. Glass plates and/or micas are mounted with gasket and cushion and are fixed with the cover plate or pressure frames and bolts. The glass plates used for sight glass level gauges correspond to DIN 7081 and are suitable for temperatures up to 243 °C (280 °C when protected with mica) for steam, up to 300 °C for other Iiquids, and in special cases up to 400 °C. Borosilicate glass is standard quality. For conditions above the natural mineral mica is used. The process connection normally is equipped with gauge valves. Drain valves are used for draining the gauge and are generally mounted on the lower end of the gauge body. In Special cases a vent valve can be installed on the upper end. Gauge body Contains the liquid duct, the level corresponds with the level in the vessel. Glass Glass plates according to DIN 7081, made of BorosilicateGlass, quartz, Aluminum silicate Gasket Recessed sealing between liquid duct and ambient Bolt / Nut Take up the forces of the pressure inside. Cover Clamping for Glass plate. Cushion Mechanical protection between cover and glass Gauge body Cover Bolt Gasket Glass Nut Cushion KSR KUEBLER AG Data Sheet Sight Glass Level Gauges ∙ 06/2013 Page 5 of 56 Gauge valves Functional description The gauge valves are used to shut off the the vessel against the level gauge. The actuation can be done by a lever (120°) or a handwheel. All gauge valves are equipped with a ball check as a safety device.. Functional principle ball check ball check at leakage situation during putting into operation situation in normal operation causing flow of liquid, the ball is driven to the seat by the liquid (L1p > 0,5 bar). This closes the valve and stops heavy leakage. The ball check is a safety device which is used in all gauge valves. It’s task is to avoid heavy leakage after breaking of a glass or mica window or leakages due to other reasons. The ball is located below the seat. As soon as there is leakage Operation directions of quick closing valve and handwheel valve open valve open 120° 120° 120° 120° 120° C C O O O O C C C O O C 120° quick closing valve (QC) valve closed actuation direction left (LI) valve closed actuation direction right (RE) O O C C O C handwheel (HW) closing direction always right View direction onto vessel left (LI) right (RE) front (VO) Complete specification for view direction and valve orientation Sight direction actuation direction valve actuator valve type e. g. view direction left, actuation direction right, quick closing, angle type: LI-RE-SS-Eck Page 6 of 56 KSR KUEBLER AG Data Sheet Sight Glass Level Gauges ∙ 06/2013 Arrangement of Sections A>=45 SL L Flat glasses acc. to DIN 7081 backside view glass type 2 standard normal indication interrupted uninterrupted indication with bypass Visible length and glass type Glass type 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 L 75 95 120 145 170 200 230 260 300 320 350 380 410 440 480 510 540 580 610 640 680 L+A 120 140 165 190 215 245 275 305 345 365 395 425 455 485 525 555 585 625 655 685 725 480 510 540 580 610 640 680 nos of segments n Visible length SL 1 75 95 120 145 170 200 230 260 300 320 350 380 410 440 2 195 235 285 335 385 445 505 565 645 685 745 805 865 925 1005 1065 1125 1205 1265 1325 1405 3 315 375 450 525 600 690 780 870 990 1050 1140 1230 1320 1410 1530 1620 1710 1830 1920 2010 2130 4 435 515 615 715 815 935 1055 1175 1335 1415 1535 1655 1775 1895 2055 2175 2295 2455 2575 2695 2855 5 555 655 780 905 1030 1180 1330 1480 1680 1780 1930 2080 2230 2380 2580 2730 2880 3080 3230 3380 3580 6 675 795 945 1095 1245 1425 1605 1785 2025 2145 2325 2505 2685 2865 3105 3285 3465 3705 3885 4065 4305 7 795 935 1110 1285 1460 1670 1880 2090 2370 2510 2720 2930 3140 3350 3630 3840 4050 4330 4540 4750 5030 8 9 915 1075 1275 1475 1675 1915 2155 2395 2715 2875 3115 3355 3595 3835 4155 4395 4635 4955 5195 5435 5755 1035 1215 1440 1665 1890 2160 2430 2700 3060 3240 3510 3780 4050 4320 4680 4950 5220 5580 5850 10 1155 1355 1605 1855 2105 2405 2705 3005 3405 3605 3905 4205 4505 4805 5205 5505 5805 11 1275 1495 1770 2045 2320 2650 2980 3310 3750 3970 4300 4630 4960 5290 5730 12 1395 1635 1935 2235 2535 2895 3255 3615 4095 4335 4695 5055 5415 5775 Matrix valid for A = 45 We recommend max. 7 segments and above the use of multople gauges. KSR KUEBLER AG Data Sheet Sight Glass Level Gauges ∙ 06/2013 Page 7 of 56 Sight Glass Level Gauge CL 300 Type 700.1201(reflex) / 700.1202 (transparent) Visible length SL ≤ ME Connection gauge valve-body union Gauge valve types see datasheet 760.51/52 Actuation handwheel Material glass plates acc. to DIN7081 Borosilicate Material media wetted parts CS, SS Depending on delivery situation material can vary. Types with special materials e.g. Hastelloy, Monel etc. are available. Further Data Process connection Vent Drain Accessories Glass protection etc. Frosts protection Illumination Scale Heating Page 8 of 56 A ME View direction Reflex version Gauge valve Drain View direction Orientation of gauge valve and operation 760.52 760.51 d Design Data Derating depends on temperature and window size. Transparent version Gauge valve 100 General Data A SL ■■ Light execution ■■ Reflex, Transparent ■■ Connection side–side fixed ■■ Connection gauge valve to gauge chamber: union ■■ Handwheel 80 GL (depending on drain and vent types) Special Features scheme A-A 105 Vent Direct reading liquid level indicator for general applications up to CL 300 (depends on glass type). Increased safety with ball check valves. 130 Applications e h see Connections see Connections see Connections i g see Accessories see Accessories see Accessories see Accessories see Accessories CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. KSR KUEBLER AG Data Sheet 700.12 ∙ 03/2012 Sight Glass Level Gauge CL 900 Type 700.1201A (reflex) / 700.1202A (transparent) Vent Direct reading liquid level indicator for general applications up to CL 900 (depends on glass type). Increased safety with ball check valves. Visible length SL ≤ ME Connection gauge valve-body union Gauge valve types see datasheet 760.51/52 Actuation handwheel Material glass plates acc. to DIN7081 Borosilicate Material media wetted parts CS, SS Depending on delivery situation material can vary. Types with special materials e.g. Hastelloy, Monel etc. are available. Further Data Process connection Vent Drain Accessories Glass protection etc. Frosts protection Illumination Scale Heating A ME View direction Reflex version Gauge valve Drain View direction Orientation of gauge valve and operation 760.52 760.51 d Design Data Derating depends on temperature and window size. Transparent version Gauge valve 100 General Data A SL ■■ Light execution ■■ Reflex, Transparent ■■ Connection side–side fixed ■■ Connection gauge valve to gauge chamber: union ■■ Handwheel 80 GL (depending on drain and vent types) Special Features scheme A-A 105 130 Applications e h see Connections see Connections see Connections i g see Accessories see Accessories see Accessories see Accessories see Accessories KSR KUEBLER AG Data Sheet 700.12XXA ∙ 06/2013 CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. Page 9 of 56 Sight Glass Level Gauge CL 300 Type 700.1301(reflex) / 700.1302 (transparent) Applications General Data Visible length SL ≤ ME Connection gauge valve-body union Gauge valve types see datasheet 760.56/57 Actuation quick closing Material glass plates acc. to DIN 7081 Borosilicate Material media wetted parts CS, SS Depending on delivery situation material can vary. Types with special materials e.g. Hastelloy, Monel etc. are available. Accessories Glass protection etc. Frosts protection Illumination Scale Heating Page 10 of 56 Transparent version ME A View direction Reflex version Gauge valve Drain View direction Orientation of gauge valve and operation 760.57 760.56 Derating depends on temperature and window size. Process connection Vent Drain Gauge valve d Design Data Further Data A SL ■■ Light execution ■■ Reflex, Transparent ■■ Connection side–side fixed ■■ Connection gauge valve to gauge chamber: union ■■ Quick closing 80 GL (depending on drain and vent types) Special Features scheme A-A Vent Direct reading liquid level indicator for general applications up to CL 300 (depends on glass type). Increased safety with ball check valves. see Connections see Connections see Connections see Accessories see Accessories see Accessories see Accessories see Accessories e g Dimensions in mm CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. KSR KUEBLER AG Data Sheet 700.13 ∙ 06/2013 Sight Glass Level Gauge CL 600 Type 700.1301A (reflex) / 700.1302A (transparent) Applications General Data Visible length SL ≤ ME Connection gauge valve-body union Gauge valve types see datasheet 760.56/57 Actuation quick closing Material glass plates acc. to DIN 7081 Borosilicate Material media wetted parts CS, SS Depending on delivery situation material can vary. Types with special materials e.g. Hastelloy, Monel etc. are available. Accessories Glass protection etc. Frosts protection Illumination Scale Heating Transparent version ME A View direction Reflex version Drain Gauge valve View direction Orientation of gauge valve and operation 760.57 760.56 Derating depends on temperature and window size. Process connection Vent Drain Gauge valve d Design Data Further Data A SL ■■ Light execution ■■ Reflex, Transparent ■■ Connection side–side fixed ■■ Connection gauge valve to gauge chamber: union ■■ Quick closing 80 GL (depending on drain and vent types) Special Features scheme A-A Vent Direct reading liquid level indicator for general applications up to CL 900 (depends on glass type). Increased safety with ball check valves. see Connections see Connections see Connections see Accessories see Accessories see Accessories see Accessories see Accessories KSR KUEBLER AG Data Sheet 700.13XXA ∙ 06/2013 e g Dimensions in mm CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. Page 11 of 56 Sight Glass Level Gauge CL 300 Type 700.2101(reflex) / 700.2102 (transparent) Applications General Data Visible length SL < ME – 180 mm Connection gauge valve-body union Gauge valve types see datasheet 760.53 Actuation handwheel Material glass plates acc. to DIN7081 Borosilicate Material media wetted parts CS, SS Depending on delivery situation material can vary. Types with special materials e.g. Hastelloy, Monel etc. are available. A ME View direction Reflex version Drain Orientation of gauge valve and operation 760.53 Orientation ”0” Derating depends on temperature and window size. Process connection Vent Drain Accessories Glass protection etc. Frosts protection Illumination Scale Heating Page 12 of 56 View direction Gauge valve Design Data Further Data Transparent version A SL ■■ Light execution ■■ Reflex, Transparent ■■ Connection top-bottom pivoted ■■ Connection gauge valve to gauge chamber: union ■■ Offset, handwheel scheme A-A 80 GL (depending on drain and vent types) Special Features Gauge valve Vent Direct reading liquid level indicator for general applications up to CL 300 (depends on glass type). Increased safety with ball check valves. see Connections see Connections see Connections side view top view pivoted View direction View direction see Accessories see Accessories see Accessories see Accessories see Accessories Measures in mm CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. KSR KUEBLER AG Data Sheet 700.21 ∙ 06/2013 Sight Glass Level Gauge CL 900 Type 700.2101A (reflex) / 700.2102A (transparent) Applications General Data Visible length SL < ME – 180 mm Connection gauge valve-body union Gauge valve types see datasheet 760.53 Actuation handwheel Material glass plates acc. to DIN7081 Borosilicate Material media wetted parts CS, SS Depending on delivery situation material can vary. Types with special materials e.g. Hastelloy, Monel etc. are available. A ME View direction Reflex version Drain Orientation of gauge valve and operation 760.53 Orientation ”0” Derating depends on temperature and window size. Process connection Vent Drain Accessories Glass protection etc. Frosts protection Illumination Scale Heating View direction Gauge valve Design Data Further Data Transparent version A SL ■■ Light execution ■■ Reflex, Transparent ■■ Connection top-bottom pivoted ■■ Connection gauge valve to gauge chamber: union ■■ Offset, handwheel scheme A-A 80 GL (depending on drain and vent types) Special Features Gauge valve Vent Direct reading liquid level indicator for general applications up to CL 900 (depends on glass type). Increased safety with ball check valves. see Connections see Connections see Connections side view top view pivoted View direction View direction see Accessories see Accessories see Accessories see Accessories see Accessories KSR KUEBLER AG Data Sheet 700.21XXA ∙ 06/2013 Measures in mm CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. Page 13 of 56 Sight Glass Level Gauge CL 300 Type 700.2301(reflex) / 700.2302 (transparent) Applications General Data Visible length SL < ME – 180 mm Connection gauge valve-body union Gauge valve types see datasheet 760.58 Actuation quick closing Material glass plates acc. To DIN7081 Borosilicate Material media wetted parts CS, SS Depending on delivery situation material can vary. Types with special materials e.g. Hastelloy, Monel etc. are available. 80 A Reflex version Gauge valve bottom View direction Drain Orientation of gauge valve and operation 760.58 Orientation ”0” Derating depends on temperature and window size. Process connection Vent Drain Accessories Glass protection etc. Frosts protection Illumination Scale Heating Page 14 of 56 A View direction Design Data Further Data Transparent version ME ■■ Light execution ■■ Reflex, Transparent ■■ Connection top-bottom pivoted ■■ Connection gauge valve to gauge chamber: union ■■ Offset, quick closing scheme A-A GL (depending on drain and vent types) Special Features Gauge valve top Vent Direct reading liquid level indicator for general applications up to CL 300 (depends on glass type). Increased safety with ball check valves. see Connections see Connections see Connections side view top view pivoted View direction View direction see Accessories see Accessories see Accessories see Accessories see Accessories CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. KSR KUEBLER AG Data Sheet 700.23 ∙ 06/2013 Sight Glass Level Gauge CL 600 Type 700.2301A (reflex) / 700.2302A (transparent) Applications General Data Visible length SL < ME – 180 mm Connection gauge valve-body union Gauge valve types see datasheet 760.58 Actuation quick closing Material glass plates acc. To DIN7081 Borosilicate Material media wetted parts CS, SS Depending on delivery situation material can vary. Types with special materials e.g. Hastelloy, Monel etc. are available. 80 A Reflex version Gauge valve bottom View direction Drain Orientation of gauge valve and operation 760.58 Orientation ”0” Derating depends on temperature and window size. Process connection Vent Drain Accessories Glass protection etc. Frosts protection Illumination Scale Heating A View direction Design Data Further Data Transparent version ME ■■ Light execution ■■ Reflex, Transparent ■■ Connection top-bottom pivoted ■■ Connection gauge valve to gauge chamber: union ■■ Offset, quick closing scheme A-A GL (depending on drain and vent types) Special Features Gauge valve top Vent Direct reading liquid level indicator for general applications up to CL 900 (depends on glass type). Increased safety with ball check valves. see Connections see Connections see Connections side view top view pivoted View direction View direction see Accessories see Accessories see Accessories see Accessories see Accessories KSR KUEBLER AG Data Sheet 700.23XXA ∙ 06/2013 CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. Page 15 of 56 Sight Glass Level Gauge CL 300 Type 700.2601(reflex) / 700.2602 (transparent) Applications Gauge valve Vent Direct reading liquid level indicator for general applications up to CL 1500 (depends on glass type). Increased safety with ball check valves. General Data Visible length SL ≤ ME Connection gauge valve-body union Gauge valve types see datasheet 760.51/52 Actuation handwheel Material glass plates acc. To DIN7081 Borosilicate Material media wetted parts CS, SS Depending on delivery situation material can vary. Types with special materials e.g. Hastelloy, Monel etc. are available. A A B Reflex version View direction Drain Orientation of gauge valve and operation 760.51 Derating depends on temperature and window size. Process connection Vent Drain Accessories Glass protection etc. Frosts protection Illumination Scale Heating Page 16 of 56 Gauge valve 760.52 d Design Data Further Data ME View direction B SL ■■ „Cold“ High pressure ■■ Reflex, Transparent ■■ Connection side-side fixed ■■ Connection gauge valve to gauge chamber: union ■■ Handwheel Transparent version GL (depending on drain and vent types) Special Features scheme A–A e h see Connections see Connections see Connections i g see Accessories see Accessories see Accessories see Accessories see Accessories CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. KSR KUEBLER AG Data Sheet 700.26 ∙ 06/2013 Sight Glass Level Gauge CL 1500 Type 700.2701(reflex) / 700.2702 (transparent) Applications Vent Direct reading liquid level indicator for general applications up to CL 1500 (depends on glass type). Increased safety with ball check valves. Visible length SL ≤ ME – 180 mm Connection gauge valve-body union Gauge valve types see datasheet 760.53 Actuation handwheel Material glass plates acc. To DIN7081 Borosilicate Material media wetted parts CS, SS Depending on delivery situation material can vary. Types with special materials e.g. Hastelloy, Monel etc. are available. Design Data Process connection Vent Drain Accessories Glass protection etc. Frosts protection Illumination Scale Heating A View direction B B Reflex version View direction Drain Gauge valve Bottom Orientation of gauge valve and operation 760.53 Orientation ”0” Derating depends on temperature and window size. Further Data A ME General Data Transparent version SL ■■ „Cold“ High pressure ■■ Reflex, Transparent ■■ Connection top-bottom pivoted ■■ Connection gauge valve to gauge chamber: union ■■ Offset, handwheel scheme A–A GL (depending on drain and vent types) Special Features Gauge valve see Connections see Connections see Connections side view top view pivoted View direction View direction see Accessories see Accessories see Accessories see Accessories see Accessories KSR KUEBLER AG Data Sheet 700.27 ∙ 06/2013 CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. Page 17 of 56 Sight Glass Level Gauge weld-in CL 600 Type 700.31/3201(reflex) / 700.31/3202 (transparent) Applications Direct reading liquid level indicator for welding in a container wall, up to CL 600. Special Features ■■ Reflex, Transparent ■■ Body open, closed General Data ca. 8 0 ( 1 0 5 ) ) SL 1 Types with special materials e.g. Hastelloy, Monel etc. are available. 1 scheme A–A 3 0 (4 0 ) ) Typ 700.31 A A L Body weld-in optionally corners rounded Process connection welded Material glass plates acc. To DIN7081 Borosilicate Material media wetted parts CS, SS Design Data Derating depends on temperature and window size. View direction 80 ) with larger pressure, tank volumes or length Typ 700.32 ca. 8 0 (10 5 ) ) A A 1 scheme A–A SL CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. 1 30 (4 0 ) ) see Accessories 1 Glass protection etc. L Accessories View direction 80 1 ) with larger pressure, tank volumes or length Dimensions in mm Dimension table glass sizes Glass size length L sight length SL Glass size length L sight length SL 0 118 75 11 423 380 2 163 120 13 483 440 213 170 1 3 4 5 6 7 8 9 10 Page 18 of 56 138 188 243 273 303 343 363 393 95 12 145 14 200 230 260 300 320 350 15 16 17 18 19 20 453 523 553 583 623 653 683 723 410 480 510 540 580 610 640 680 KSR KUEBLER AG Data Sheet 700.31/32 ∙ 06/2013 Sight Glass Level Gauge CL 300 Type 700.4601(reflex) / 700.4602 (transparent) Applications Vent Direct reading liquid level indicator with glass tube for out-gasing media up to CL 300 (depends on glass type). Visible length SL Process connection Material glass plates acc. To DIN7081 Material media wetted parts < GL flange, nipple Borosilicate CS, SS Depending on delivery situation material can vary. Types with special materials e.g. Hastelloy, Monel etc. are available. Accessories Glass protection etc. Frosts protection Illumination Scale Heating View direction Reflex version 80 Drain Derating depends on temperature and window size. Process connection A Example process connction Design Data Further Data A Transparent version SL General Data GL (depending on process connection) Special Features ■■ Reflex, Transparent ■■ Connection top-bottom pivoted ■■ Gauge heads 760.51/52/53 scheme A–A Example process connction View direction Example connection Process see Connections Drain / vent see Accessories see Accessories see Accessories see Accessories see Accessories Welding end Thread connection Flange Flange piece valve CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. KSR KUEBLER AG Data Sheet 700.46 ∙ 06/2013 Page 19 of 56 Reflection Water Level Gauge CL 300 Type 700.B1 (Reflex) Applications Typ 700.B1 The liquid water level gauge type 700.B1 is a reflection gauge for direct reading water level in steam boilers. They are equipped with sight glasses with grooves for a clear contrast in the display. ■■ Reflection ■■ Connection side-side fixed ■■ Gauge heads integrated ■■ Glass holder: side plates, hinged ■■ Handwheeld m i n . 30 acc. TRD <ME 2 – 11 (34 x 17 mm) handwheel valves integrated 8 mm flange DIN, EN or ANSI Borosilikate CS CS SS Graphite Design Data Design temperature / Design pressure 60 Hexagon screw m in . 40 Section A - A Sleeve G 3/8 (Glass holder) Safety disc Glass holder Drain valve or Ball valve Water channel Reflection glass side plates hinged Ø11 x 1,5 Arrangement –10...100°C / 40 bar up to 200°C / 32 bar up to 243°C / 30 bar "A" "B" Reflection glass "C" Direction of view Accessories A X=... Sight length SL*) Glass size**) Actuation Connection gauge head-body Valve passage Process connection Materials - Sight glasses DIN 7081 - Glass holder - Connection flanges - Shut off parts - Gaskets 95 General Data A centre-to-centre distance ME = ... Special Features Sight length SL (Glass size 2 to 11) vent plug G 3/8 x 12 DIN910 Dimensions in mm Pointer For shut off valves Glass protection NW-mark acc. to TRD automatically closing ball (safety device) (at least 1 bar pressure tanks required for the function) Mica exterior protection *) Sight length „SL“ = min. center-center-distance ME – 80 mm Interruption between 2 sight glasses: min. 50 mm **) Other glass sizes available on request. CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. Glass size / range of centre-to-centre distance Glass size Glass length / mm SL per segment 2 3 4 5 6 7 8 9 10 11 140 165 190 220 250 280 320 340 370 400 120 145 1 x glass size 200 225 3 x glass size 540 615 2 x glass size Page 20 of 56 370 420 170 200 230 260 min. center-to-center-distance / mm 300 320 350 380 250 280 310 340 380 400 430 460 690 780 870 960 1080 1140 1230 1320 470 530 590 650 730 770 830 890 KSR KUEBLER AG Data Sheet 700.B1 ∙ 06/2013 Reflections Level Gauge PN 40 Type 700.B301 (Reflex), NIVOFLEX Type 22/230 Applications Typ 700.B301 Vent plug G 1/2 x 14 DIN910 Accessories Pointer For shut off valves Glass protection CS or SS CS or SS CS or SS SS Mat. 1.4401, 1.4571 Borosilikat, with grooves acc. to DIN 7081 non-asbestos (Graphite with foil) NW-mark acc. to TRD automatically closing ball (safety device) (at least 1 bar pressure tanks required for the function) Mica exterior protection A Sight length SL = integrated at top and bottom 8 mm flange DIN 20-25/PN 40, Form C Type 17501 G ½ x 14 mm, DIN 910 A NW min. 30 mm acc. to TRD Valves Valve passage Process connection Draining valve Vent screw Materials - Glass holder - Connection flanges - Draining valve - Shut-off parts - Reflection sight glasses - Gaskets min. 40 General Data centre-to-centre-distance ME = ... The liquid level gauge type NIVOFLEX 22/230 is a universal direct reading reflection level gauge for heating engineering, refrigerating engineering as well as for storage vessels, considering the chemical resistance of the used materials. They are equipped with sight glasses with grooves for a clear contrast in the display. Section A - A Drain valve Type 17/501 70 Ø 11 x 1,5 Dimensions in mm CS (= carbon steel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. KSR KUEBLER AG Data Sheet 700.B301 ∙ 06/2013 Page 21 of 56 Glass size / range of centre-to-centre distance Glass size* Glass length / mm SL per segment 1 x glass size 2 x glass size 2 3 4 5 6 7 8 9 140 165 190 220 250 280 320 340 120 200 145 170 200 230 min. center-to-center-distance / mm 225 250 3 x glass size 5 x glass size * Reflection glasses DIN 7081, width 34 mm, thickness 17 mm 300 320 280 310 340 380 400 770 870 960 1080 1140 525 1015 4 x glass size 260 1280 590 1135 1410 650 1255 1560 730 1415 1760 770 1495 1860 Sight length SL = min. center-to-center-distance ME – 80 mm Interruption between 2 sight glasses min. 45 mm Design Data Design pressure PN 40 (with shut-off valve) Design temperature* Design pressure – 10 ... 120 °C 40 bar – 10 ... 243 °C 32 bar – 10 ... 200 °C 35 bar max. temperature for reflection glass acc. to DIN 7081 = 243 °C *Design – 60°C available on request Anordnung C Reflection glass Direction of view Page 22 of 56 KSR KUEBLER AG Data Sheet 700.B301 ∙ 01/2013 Reflection Water Level Gauge PN 40 Type 700.B5 (Reflex) Applications Type 700.B5 The liquid water level gauge type 700.B5 is a reflection gauge for direct reading water level in steam boilers. They are equipped with sight glasses with grooves for a clear contrast in the display. 40 m in . 40 Special Features <ME 2 – 11 (34 x 17 mm) lever valves side-side 760.11 8 mm flange DIN, EN or ANSI Borosilikate CS CS SS Graphite Water channel Reflection glass side plates hinged NW X=... Glass holder A min. 30 acc. TRD Safety disc A m in . 40 Sight length SL*) Glass size**) Actuation Connection gauge head-body Valve type Valve passage Process connection Materials - Sight glasses DIN 7081 - Glass holder - Connection flanges - Shut off parts - Gaskets Hexagon screw Sight length SL (Glass size 2 to 11) 60 95 General Data Section A - A centre-to-centre distance ME = ... ■■ Reflection ■■ Connection side-side fixed ■■ Gauge heads side-side ■■ Glass holder: side plates, hinged ■■ Lever Drain valve or Ball valve Ø 11 x 1,5 Arrangement Design Data Design temperature / Design pressure – 10...100°C / 40 bar up to 200°C / 32 bar up to 243°C / 30 bar "C" Direction of view Reflection glass "D" Meassures in mm Accessories Pointer For shut off valves Glass protection NW-mark acc. to TRD automatically closing ball (safety device) (at least 1 bar pressure tanks required for the function) Mica exterior protection *) Sight length SL = min. center-center-distance ME – 80 mm Interruption between 2 sight glasses: min. 50 mm **) Other glass sizes available on request. CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. Glass size / range of centre-to-centre distance Glass size Glass length / mm SL per segment 2 3 4 5 6 7 8 9 10 11 140 165 190 220 250 280 320 340 370 400 120 145 1 x glass size 200 225 3 x glass size 540 615 2 x glass size 370 170 200 230 260 min. center-to-center-distance / mm 420 KSR KUEBLER AG Data Sheet 700.B5 ∙ 06/2013 300 320 350 380 250 280 310 340 380 400 430 460 690 780 870 960 1080 1140 1230 1320 470 530 590 650 730 770 830 890 Page 23 of 56 Reflection Water Level Gauge PN 40 Type 700.B7 (Reflex) Applications Type 700.B7 The water level gauge type 700.B7 is a universal reflection gauge for direct reading water level e.g. for storage vessels. They are equipped with sight glasses with grooves for a clear contrast in the display. 40 Design temperature / Design pressure –10 ... 120 °C / 40 bar –10 ... 238 °C / 32 bar min 7 0 min 51,5 X incli sight ned lengt h inclin centr ed e-tocentr e-dis tance 15° NW T = vertical ME x 0,2679 inclined ME = vertical ME / 0,9659 inclination 15° Arrangement Section A - A 60 Hexagon screw Safety disc Glass holder 95 Design Data A <=115 Sight length SL*) <ME Actuation lever Connection gauge head – glass holder valves side-side Valve type 760.11 Valve passage 8 mm Process connection flange DIN, EN or ANSI Vent plug M 12x12, DIN 910 Materials - Sight glasses DIN 7081 Borosilikate - Glass holder CS - Connection flanges CS - Shut off parts CS - Gaskets Graphite Sight length General Data A m in . 50 centre-to-centre-distance ■■ Reflection ■■ Connection side-side fixed ■■ Gauge heads side-side ■■ Glass holder: side plates, hinged ■■ Lever Accessories 72 m in . 67,5 Special Features T Water channel Reflection glass side plates hinged Reflection glass C D Reflection glass Direction of view Dimensions in mm Pointer For shut off valves Glass protection NW-mark acc. to TRD automatically closing ball (safety device) (at least 1 bar pressure tanks required for the function) Mica exterior protection CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. Glass size / range of centre-to-centre distance Glass sizee Glass length / mm SL per segment vertical CCD* Page 24 of 56 from to 2 3 4 5 6 7 8 9 140 165 190 220 250 280 320 340 233,5 257,5 281,5 310,5 339,5 368,5 407 426,5 120 265 145 290 170 320 200 345 230 375 260 415 300 435 320 465 KSR KUEBLER AG Data Sheet 700.B7 ∙ 06/2013 Transparent Sight Glass Level Gauge PN 40 Type 700.C0 (Transparent) Applications Type 700.C0 vent m i n . 40 The transparent sight glass level gauge type 700.C0 is für direct reading e.g. for storage vessels. ■■ Transparent ■■ Connection back-side ■■ Gauge heads integrated ■■ Glass holder with smooth sight glasses ■■ Handwheel Borosilikate CS CS CS SS Graphite m i n . 40 < ME handwheel valves integrated 8 mm flange DIN, EN or ANSI m i n . 40 70 138 Sight length SL*) Actuation Connection gauge head-body Valve passage Process connection Materials - Sight glasses DIN 7081 - Glass holder - Connection flanges - Drain valve - Shut off parts - Gaskets scheme 127 General Data centre-to-centre-distance ME = ... sight length SL m i n . 40 Special Features drain Ø 11 x 1,5 Arrangement A Design Data B Design temperature / Design pressure – 10 ... 100°C / 40 bar (for glass sizes 2 to 9) – 10 ... 200°C / 32 bar – 10 ... 243°C / 30 bar – 10 ... 300°C*/ 30 bar *) with mica protection inner side C Direction of view Dimensions in mm Accessories Pointer For shut off valves Glass protection NW-mark acc. to TRD automatically closing ball (safety device) (at least 1 bar pressure tanks required for the function) Mica exterior protection *) Sight length SL = center-to-center-distance ME – 80 mm Interruption between 2 sight glasses: min. 45 mm CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. Glass size / range of centre-to-centre distance Glass size* Glass length / mm SL per segment 1 x glass size 2 x glass size 2 3 4 5 6 7 8 9 140 165 190 220 250 280 320 340 120 200 145 170 200 230 min. center-to-center-distance / mm 225 3 x glass size 4 x glass size 5 x glass size KSR KUEBLER AG Data Sheet 700.C0 ∙ 06/2013 250 260 300 320 280 310 340 380 400 770 870 960 1080 1140 525 1015 1280 590 1135 1410 650 1255 1560 730 1415 1760 770 1495 1860 Page 25 of 56 Transparent Sight Glass Level Gauge PN 63 Type 700.C4 (Transparent) Applications Type 700.C4 vent min. 65 The transparent sight glass level gauge type 700.C4 is für direct reading e.g. for storage vessels. 190 Ø 11 x 1,5 B C 225 D 235 200 A 290 250 Design temperature / Design pressure – 10 ... 120°C / 63 bar (for glass sizes 2 to 9) – 10 ... 200°C / 50 bar – 10 ... 243°C / 45 bar – 10 ... 300°C*/ 40 bar *) with mica protection inner side Pointer For shut off valves Glass protection Illumination device series drain Arrangement Design Data Accessories min. 65 < ME lever valves backside 760.68 8 mm flange DIN, EN or ANSI CS, SS Borosilikate Graphite 140 Sight length SL*) Actuation Connection gauge head-body Valve type Valve passage Process connection Materials Material sight glasses DIN 7081 Material Gaskets Other materials on request. sight length SL General Data min. 55 ■■ Transparent ■■ Connection back-side ■■ Gauge heads backside ■■ Glass holder with smooth sight glasses ■■ Lever centre-to-centre-distance ME = ... Special Features 270 Direction of view NW-mark acc. to TRD automatically closing ball (safety device) (at least 1 bar pressure tanks required for the function) Mica exterior protection see 709 Valves with stuffing box enlarged version for easy outgasing fluids. Meassures in mm Sight length SL = min. center-center-distance ME –130 mm *) design center-to-center distance = sight length only arrangement A and B Interruption between 2 sight glasses: min. 55mm CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. Glass size / range of centre-to-centre distance Glass size* Glass length / mm SL per segment 5 6 7 8 9 220 250 280 320 340 200 1 x glass size 330 3 x glass size 840 2 x glass size 4 x glass size 5 x glass size Page 26 of 56 585 1095 1350 230 260 min. center-to-center-distance / mm 300 320 360 390 430 450 930 1020 1140 1200 645 1215 1500 705 1335 1650 785 1495 1850 825 1575 1950 KSR KUEBLER AG Data Sheet 700.C4 ∙ 06/2013 Transparent Sight Glass Level Gauge PN 100 Type 700.C5 (Transparent) Applications Type 700.C5 The transparent sight glass level gauge type 700.C5 is für direct reading e.g. for storage vessels. sight length SL drain 235 Pointer For shut off valves Glass protection Illumination device series 260 Design temperature / Design pressure – 10 ...120°C / 100 bar (for glass sizes 2 to 9) – 10 ...200°C / 90 bar – 10 ...300°C*/ 82 bar *) with mica protection inner side Accessories Ø 13 x 2,5 Arrangement Design Data 240 min. 65 < ME lever valves backside 760.68 8 mm flange DIN, EN or ANSI CS, SS Borosilikate Graphite 190 Sight length SL*) Actuation Connection gauge head-body Valve type Valve passage Process connection Materials Material sight glasses DIN 7081 Material Gaskets Other materials on request. C 240 General Data min. 55 ■■ Transparent ■■ Connection back-side ■■ Gauge heads backside ■■ Glass holder with smooth sight glasses ■■ Lever centre-to-centre-distance ME = ... Special Features total sight length GSL min. 65 vent D Direction of view NW-mark acc. to TRD automatically closing ball (safety device) (at least 1 bar pressure tanks required for the function) Mica exterior protection see 709 Meassures in mm Sight length SL = min. center-center-distance ME –130 mm *) design center-to-center distance = sight length Interruption between 2 sight glasses: min. 55mm CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. Glass size / range of centre-to-centre distance Glass size* Glass length / mm SL per segment 5 6 7 8 9 220 250 280 320 340 200 1 x glass size 330 3 x glass size 840 2 x glass size 4 x glass size 5 x glass size 230 260 min. center-to-center-distance / mm 585 1095 1350 KSR KUEBLER AG Data Sheet 700.C5 ∙ 06/2013 300 320 360 390 430 450 930 1020 1140 1200 645 1215 1500 705 1335 1650 785 1495 1850 825 1575 1950 Page 27 of 56 Sight Glass Level Gauge CL up to 600 Type 700.C601 (Reflex), 700.C602 (Transparent) Applications Type 700.C6 Direct reading liquid level indicator for boiler level up to CL 600 (depends on glass type). Increased safety with ball check valves. vent min. 40 100 235 175 160 Special Features centre-to-centre-distance ME = ... total sight length GSL sight length SL min. 120 ■■ Reflex, Transparent ■■ Connection side-side fixed ■■ Connection gauge valve to gauge chamber: flange ■■ Double shut-off, handwheel and lever General Data min. 40 Sight length SL ≤ ME Connection gauge valve - body flange Gauge valve types 760.18 Actuation handwheel and lever Material sight glasses DIN 7081 Borosilikate, mica protection Material media wetted parts CS Types with special materials are available. Design Data 150 Process connection Vent Drain Accessories Glass protection etc. Frosts protection Illumination Scale Pointer llow water Heating Page 28 of 56 see Connections see Connections see Connections see Accessories see Accessories see Accessories see Accessories see Accessories see Accessories C D 115 Further Data Arrangement 200 Derating depends on temperature and window size. drain Direction of view Dimensions in mm CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. KSR KUEBLER AG Data Sheet 700.C6 ∙ 06/2013 Transparent Sight Glass Level Gauge PN 100 Type 700.C7 Applications Type 700.C7 The transparent sight glass level gauge type 700.C7 is for direct reading e.g. for steam boilers. vent –10...120°C / 70 bar –10...200°C / 65 bar –10...243°C / 55 bar –10...300°C* / 45 bar NW-mark acc. to TRD automatically closing ball (safety device) (at least 1 bar pressure tanks required for the function) Mica exterior protection see 709 centre-to-centre-distance ME = ... 190 drain Arrangement 235 C D 270 Design temperature / Design pressure (for glass sizes 2 to 9) *) with mica protection inner side Pointer For shut off valves Glass protection Illumination device series min. 65 Ø11x1,5 Design Data Accessories min. 55 < ME lever valves backside 760.68 8 mm flange DIN, EN or ANSI CS Borosilikate Graphite 140 Sight length SL*) Actuation Connection gauge head-body Valve type Valve passage Process connection Materials Material sight glasses DIN 7081 Material gaskets Other materials on request. sight length SL General Data scheme A – A total sight length GSL ■■ Red - green ■■ Connection back-side ■■ Gauge heads backside ■■ Glass holder with smooth sight glasses ■■ Lever min. 65 Special Features Direction of view Dimensions in mm Sight length SL = min. center-center-distance ME –130 mm Interruption between 2 sight glasses: min. 55mm CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. Glass size / range of centre-to-centre distance Glass size* Glass length / mm 5 220 SL per segment 200 1 x glass size 330 3 x glass size 840 2 x glass size 4 x glass size 5 x glass size 6 250 7 280 1095 1350 KSR KUEBLER AG Data Sheet 700.C7 ∙ 06/2013 320 9 340 230 260 300 320 360 390 430 450 930 1020 1140 1200 min. center-to-center-distance / mm 585 8 645 1215 1500 705 1335 1650 785 1495 1850 825 1575 1950 Page 29 of 56 Transparent Sight Glass Level Gauge PN 160 Type 700.C8 (Transparent) Application Type 700.C8 The refraction liquid level gauge type 700.C8, with the special design of the water channel, effects a brillant darklight contrast between water and steam space and is well sulted for TV remote indication vent min. 40 60 235 175 160 Special Features < ME lever, handwheel valves side-side 760.18 flange DIN, EN or ANSI CS mica Graphite 150 drain Arrangement Design Data C D Derating depends on temperature and window size. 200 Accessories 115 Sight length SL *) Actuation Connection gauge head-body Valve type Process connection Materials Material mica package Material gaskets Other materials on request. min. 40 General Data centre-to-centre-distance ME = ... total sight length GSL sight length SL min. 120 ■■ Refraction ■■ Connection back-side ■■ Double shut-off valves side-side, with automatically closing ball ■■ Mica holder with mica sheets ■■ Lever Pointer Illumination device series NW-mark acc. to TRD see 709 Direction of view Dimensions in mm *) Sight length SL = center-to-center-distance ME – 80 mm Interruption between 2 sight glasses: min. 120 mm CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. Glass size / range of centre-to-centre distance Glass size* Glass length / mm SL per segment 3 4 5 6 7 8 9 165 190 220 250 280 320 340 145 1 x glass size 225 3 x glass size 755 2 x glass size 4 x glass size 5 x glass size Page 30 of 56 490 1020 1285 170 200 230 min. center-to-center-distance / mm 260 300 320 250 280 310 340 380 400 830 920 1010 1100 1220 1280 1560 1710 1860 2060 2160 540 1120 1410 600 1240 660 1360 720 1480 800 1640 840 1720 KSR KUEBLER AG Data Sheet 700.C8 ∙ 06/2013 Liquid Level Gauge CL 1500 Type 700.CA Application Type 700.CA The refraction liquid level gauge type 700.CA, with the special design of the water channel, effects a brillant darklight contrast between water and steam space and is well sulted for TV remote indication vent 342 242 220 min. 40 100 Special Features Nominal pressure Design temprerature / pressure max. Accessories Pointer Illumination device series drain 150 Arrangement C CL 1500 374°C / 165 bar NW-mark acc. to TRD see 709 min. 160 Design Data < ME lever, handwheel valves side-side 760.18 flange DIN, EN or ANSI CS mica Graphite D 235 Sight length SL *) Actuation Connection gauge head-body Valve type Process connection Materials Material mica package Material gaskets Other materials on request. min. 40 General Data centre-to-centre-distance ME = ... total sight length GSL sight length SL min. 120 ■■ Refraction ■■ Connection back-side ■■ Double shut-off valves side-side, with automatically closing ball ■■ Mica holder with mica sheets ■■ Lever Direction of view Dimensions in mm *) Sight length SL = center-to-center-distance ME – 80 mm Interruption between 2 sight glasses: min. 120 mm CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. Glass size / range of centre-to-centre distance Glass size* Glass length / mm SL per segment 3 4 5 6 7 8 9 165 190 220 250 280 320 340 145 1 x glass size 225 3 x glass size 755 2 x glass size 4 x glass size 5 x glass size 490 1020 1285 170 200 230 min. center-to-center-distance / mm 260 300 320 250 280 310 340 380 400 830 920 1010 1100 1220 1280 1560 1710 1860 2060 2160 540 1120 1410 KSR KUEBLER AG Data Sheet 700.CA ∙ 06/2013 600 1240 660 1360 720 1480 800 1640 840 1720 Page 31 of 56 Glass Tube Liquid Level Gauge PN 10 Type 700.A1 General Data Accessories glass protection**) visual help Scale plexiglass cover Ø 42mm coloured float division and unity to customers spec. Ø 90 Process connection male thread h max. 95 min. 85 sight lebgth = ME – 110 mm Ø 90 DN 15 – 25 PN 10 min. 150 mm max.1200 mm Ø 90 centre-to-centre-distance ME max. 95 min. 85 ME – 110 mm up to 120°C / 10bar up to 200°C / 8bar sight length = drain Ø 26 G 1/2 Design temperature / Design pressure min. 150 mm max.1200 mm Design Data ME – 110 mm ■■ Connection top-bottom pivoted ■■ Handwheel ■■ Glass protection Process connection flange Flange DN 15 DN 20 / 25 h 49,5 51,5 *) length glasstube = ME – 65 mm **) length = ME – 55, product temperature max. 80°C. Page 32 of 56 max. 95 min. 85 Ø 90 centre-to-centre-distance ME min. 150 mm Ø 26 max.1200 mm G 1/2 Special Features h max. 95 min. 85 KSR KUEBLER AG Data Sheet 700.A1 ∙ 06/2013 ME – 110 mm vent Direct reading liquid level indicator with glass tube for general applications up to CL150. Increased safety with ball check valves and glass protection. Center-to-center ME max. 1200 mm Sight length ME – 110 mm Diameter of glass tube*) Ø 13,5 x 1,75mm Actuation handwheel Valve passage 8 mm Process connection male thread G 1/2 DIN ISO14 22835 flange DN 15 - 25 / PN 10 Materials - gauge heads steel 1.0570 / 1.0460 - gaskets for glass tube PTFE - glass tube DURAN The materials may vary depending upon availability. 14 35 min. 150 mm max.1200 mm Applications Glass Tube Liquid Level Gauge PN 10 Type 700.A2 Applications Accessories glass protection**) visual help Scale up to 120°C / 10bar centre-to-centre-distance ME Center-to-center ME max. 1200 mm Sight length ME – 70 mm Diameter of glass tube*) Ø 13,5 x 1,75mm Actuation handwheel Valve passage 8 mm Process connection male thread G 1/2 DIN ISO 228 flange DN 15 - 25 / PN 10 Materials - gauge heads brass 2.0401 - gaskets for glass tube rubber (Perbunan) - glass tube DURAN The materials may vary depending upon availability. Design temperature / Design pressure 75 Ø 13,5 General Data Design Data 30 44 75 Ø 13,5 sight length = ME – 70 ■■ Connection top-bottom pivoted ■■ Handwheel ■■ Glass protection 13 DN 15 – DN 25 Special Features vent G 1/2 Direct reading liquid level indicator with glass tube for general applications up to CL150. Increased safety with ball check valves and glass protection. drain Process connection male thread Process connection flange *) length glasstube = ME– 65 mm **) length = ME – 55, product temperature max. 80°C. Length of brass-protection rods ME + 30 mm plexiglass cover Ø 42mm coloured float division and unity to customers spec. KSR KUEBLER AG Data Sheet 700.A2 ∙ 06/2013 Page 33 of 56 Glass Tube Liquid Level Gauge PN 10 Type 700.A3 General Data Accessories glass protection**) visual help Scale plexiglass cover Ø 42mm coloured float division and unity to customers spec. Ø 90 Process connection male thread h max. 95 min. 85 sight lebgth = ME – 110 mm Ø 90 DN 15 – 25 PN 10 min. 150 mm max.1200 mm Ø 90 centre-to-centre-distance ME max. 95 min. 85 ME – 110 mm up to 120°C / 10bar up to 200°C / 8bar sight length = drain Ø 26 G 1/2 Design temperature / Design pressure min. 150 mm max.1200 mm Design Data ME – 110 mm ■■ Connection top-bottom pivoted ■■ Handwheel ■■ Glass protection Process connection flange Flange DN 15 DN 20 / 25 h 49,5 51,5 *) length glasstube = ME – 65 mm **) length = ME – 55, product temperature max. 80°C. Page 34 of 56 max. 95 min. 85 Ø 90 centre-to-centre-distance ME min. 150 mm Ø 26 max.1200 mm G 1/2 Special Features h max. 95 min. 85 KSR KUEBLER AG Data Sheet 700.A3 ∙ 06/2013 ME – 110 mm vent Direct reading liquid level indicator with glass tube for general applications up to CL150. Increased safety with ball check valves and glass protection. Center-to-center ME max. 1200 mm Sight length ME – 110 mm Diameter of glass tube*) Ø 13,5 x 1,75mm Actuation handwheel Valve passage 8 mm Process connection male thread G 1/2 DIN ISO14 22835 flange DN 15 - 25 / PN 10 Materials - gauge heads SS 1.4571 - gaskets for glass tube PTFE - glass tube DURAN The materials may vary depending upon availability. 14 35 min. 150 mm max.1200 mm Applications Glass Tube Liquid Level Gauge PN 10 Type 700.A4 Applications vent 30 14 G 3/8 G 1/2 Direct reading liquid level indicator with glass tube for general applications up to CL150. Increased safety with ball check valves and glass protection. 31 Special Features Center-to-center ME max. 1000 mm Sight length ME – 80 mm Diameter of glass tube*) Ø 13,5 x 1,75mm Process connection male thread G 1/2 DIN ISO 228 Materials - gauge heads SS 1.4571 - gaskets for glass tube PTFE - glass tube DURAN The materials may vary depending upon availability. Design Data Accessories glass protection**) visual help Scale up to 100°C / 10 bar up to 200°C / 8 bar 31 Design temperature / Design pressure sight length SL = ME – 80 General Data centre-to-centre-distance ME max. 1000 mm ■■ Connection top-bottom pivoted ■■ without gauge heads ■■ Glass protection plexiglass cover Ø 42mm coloured float division and unity to customers spec. drain G 3/8 *) length glasstube = ME– 20 mm **) length = ME – 30, product temperature max. 80°C. KSR KUEBLER AG Data Sheet 700.A4 ∙ 06/2013 Page 35 of 56 Glass Tube Liquid Level Gauge PN 25 Type 700.01 Applications Process connection Direct reading liquid level indicator with glass tube for general applications up to CL 150. Increased safety with ball checkvalves and glass protection. Vent Gauge head Special Features ■■ Connection top - bottom pivoted ■■ Offset, handwheel ■■ Glass protection Glass tube Design pressure /temperature Further Data Process connection Vent Drain Accessories Scale Spare parts Glasstube Page 36 of 56 – 20...+ 200°C / 0...25 bar see Connections see Connections see Connections see Accessories length = ME – 40 ME Visible length SL ME – 130 mm from 1500 mm and up every 1000 mm glass-holder in-between Process connection union, flange Gauge valve types s. data sheet 760.01 Actuation handwheel Material glass tube Borosilicate Material media wetted parts CS, SS Material glass protection device Acrylicglass / SS Material sealing glass tube Viton Types with special materials e.g. Hastelloy, Monel etc.are available. Weight - basic weight for ME ≤1500 mm 3,6 kg - basic weight for ME >1500 mm 4,9 kg - + weight / m 0,2 kg - weight glass protection device / m 0,2 kg Glass holder in-between SL General Data Design Data 16 Glass protection device Process connection Process connection Drain Gauge head Orientation of gauge valve and operation 760.01 Orientation ”0” top view pivoted Direction of sight CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. KSR KUEBLER AG Data Sheet 700.01 ∙ 06/2013 Glass Tube Liquid Level Gauge PN 25 Type 700.03 Applications Process connection Direct reading liquid level indicator with glass tube for general applications up to CL 150. Increased safety with ball checkvalves and glass protection. Vent Gauge head Special Features ■■ Connection top - bottom pivoted ■■ Offset, quick closing ■■ Glass protection Glass tube Visible length SL ME – 130 mm from 1500 mm and up every 1000 mm glass-holder in-between Process connection union, flange Gauge valve types s. data sheet 760.03 Actuation quick closing Material glass tube Borosilicate Material media wetted parts CS, SS Material glass protection device Acrylic glass / SS Material sealing glass tube Viton Types with special materials e.g. Hastelloy, Monel etc.are available. Weight - basic weight for ME ≤1500 mm 3,6 kg - basic weight for ME >1500 mm 4,9 kg - + weight / m 0,2 kg - weight glass protection device / m 0,2 kg Design pressure /temperature Further Data Process connection Vent Drain Accessories Scale Spare parts Glasstube – 20...+ 200°C / 0...25 bar see Connections see Connections see Connections see Accessories length = ME – 40 KSR KUEBLER AG Data Sheet 700.03 ∙ 06/2013 Glass holder in-between ME SL General Data Design Data 16 Glass protection device Process connection Drain Gauge head Orientation of gauge valve and operation 760.01 Orientation ”0” top view pivoted Direction of sight CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. Page 37 of 56 Gauge Valve CL 1500 Type 760.51 Applications Ø 80 Ø 80 Special Features 9 13 9 13 14 14 21 21 6 7 6 7 5 5 ■■ Handwheel ■■ Nipple connection to gauge ■■ Angle seat Spindle screw inside, seat renewable ■■ Special execution up to 2500 lbs Connection chamber General Data Material - Housing, nipple, flange - Trim other materials on request Orientation Ball check diff. pressure Process connection Weight Design Data Operating pressure Temperature media Housing, nipple, flange SS Housing, nipple, flange CS 11 11 10 10 connection example process CS or SS SS horizontally, see Fig. orientation > 0,5 bar DIN / ANSI acc. to cust. spec. ca. 2,0 kg ca. 200 8 8 ca. 137 The gauge valve is to close the tank against the level gauge.It is actuated by a handwheel. As a standard an automatic ball check is integrated. The process connection is manufactured acc. tocustomer’s specification. Orientation Examples View on top of sight glass level gauge Process connection up to 25 MPa / 1500 lbs – 200...+ 400°C – 10...+ 400°C actuation left right side left / right Spare parts kit BG5XHEKIT consisting of Pos Material Bonnet 5720124159B SS 7 Cone 5610255459 SS 8 9 13 14 Page 38 of 56 Order no. 5 6 CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. Denomination Spindle 5650320759 Nut Stuffing box Base ring Packing 5921024059B 5706010059 0100016020SI 0016001040GR SS SS SS SIL4400 Graphit 10 Seat 5604120459 SS 21 Sealing D07603121026 SS 11 Ball D054011120 SS KSR KUEBLER AG Data Sheet 760.51 ∙ 06/2013 Gauge Valve CL 1500 Ø 80 Type 760.52 21 8 6 9 13 7 14 10 11 21 5 Connection chamber ■■ Handwheel ■■ Nipple connection to gauge ■■ Angle seat ■■ Spindle screw inside, seat renewable ■■ Special execution up to 2500 lbs 6 ca . 2 0 0 5 137 9 13 14 137 The gauge valve is to close the tank against the level gauge.It is actuated by a handwheel. As a standard an automatic ball check is integrated. The process connection is manufactured acc. tocustomer’s specification. Special Features Ø 80 8 ca . 2 0 0 Applications 7 10 11 General Data Material - Housing, nipple, flange - Trim other materials on request Orientation Ball check diff. pressure Process connection Weight Design Data Operating pressure Temperature media Housing, nipple, flange SS Housing, nipple, flange CS CS or SS SS horizontally, see Fig. orientation > 0,5 bar DIN / ANSI acc. to cust. spec. ca. 2,0 kg connection example process Orientation Examples View on top of sight glass level gauge up to 25 MPa / 1500 lbs – 200...+ 400°C – 10...+ 400°C left actuation Process connection right Spare parts kit BG5XHEKIT consisting of Pos Material Bonnet 5720124159B SS 7 Cone 5610255459 SS 8 9 13 14 KSR KUEBLER AG Data Sheet 760.52 ∙ 06/2013 Order no. 5 6 CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. Denomination Spindle Nut Stuffing box Base ring Packing 5650320759 5921024059B 5706010059 0100016020SI 0016001040GR SS SS SS SIL4400 Graphit 10 Seat 5604120459 SS 21 Sealing D07603121026 SS 11 Ball D054011120 SS Page 39 of 56 Gauge Valve CL 1500 Ø 80 Type 760.53 Special Features 21 8 96 13 7 14 10 11 21 5 ■■ Handwheel ■■ Nipple connection to gauge ■■ Angle seat, offset ■■ Spindle screw inside, seat renewable ■■ Special execution up to 2500 lbs 6 ca . 2 0 0 5 137 9 13 14 137 The gauge valve is to close the tank against the level gauge.It is actuated by a handwheel. As a standard an automatic ball check is integrated. The process connection is manufactured acc. tocustomer’s specification. Ø 80 8 Connection chamber ca . 2 0 0 Applications 7 10 11 General Data Material - Housing, nipple, flange - Trim other materials on request Orientation Ball check diff. pressure Process connection Weight Design Data Operating pressure Temperature media Housing, nipple, flange SS Housing, nipple, flange CS CS or SS SS horizontally, see Fig. orientation > 0,5 bar DIN / ANSI acc. to cust. spec. ca. 2,0 kg connection example process Orientation Examples side view up to 25 MPa / 1500 lbs top view Process connection sight direction sight direction – 200...+ 400°C – 10...+ 400°C actuation right pivoted Spare parts kit BG5XHEKIT consisting of Pos Material Bonnet 5720124159B SS 7 Cone 5610255459 SS 8 9 13 14 Page 40 of 56 Order no. 5 6 CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. Denomination Spindle 5650320759 Nut Stuffing box Base ring Packing 5921024059B 5706010059 0100016020SI 0016001040GR SS SS SS SIL4400 Graphit 10 Seat 5604120459 SS 21 Sealing D07603121026 SS 11 Ball D054011120 SS KSR KUEBLER AG Data Sheet 760.53 ∙ 06/2013 Gauge Valve CL 600 ca. 120 Type 760.56 Applications The gauge valve is to close the tank against the level gauge.It is actuated by a lever. As a standard an automatic ball check is integrated. The process connection is manufactured acc. tocustomer’s specification. Special Features 5 9 36 42 37 43 42 49 6 Connection chamber ■■ Quick closing lever ■■ Nipple connection to gauge ■■ Straight seat ■■ Spindle screw inside ■■ Seat renewable ca. 120 9 42 43 42 49 6 5 36 37 ca. 170 General Data Material - Housing, nipple, flange - Trim other materials on request Orientation Ball check diff. pressure Process connection Weight Design Data Operating pressure Temperature media Housing, nipple, flange SS Housing, nipple, flange CS CS or SS SS horizontally, see Fig. orientation > 0,5 bar DIN / ANSI acc. to cust. spec. ca. 1,5 kg connection example process ca. 170 40 11 40 11 Orientation Examples Process connection View on top of sight glass level gauge Process connection up to 10 MPa / 600 lbs – 200...+ 400°C – 10...+ 400°C actuation right Spare parts kit BG5XSEKIT consisting of Pos 5 36 37 6 9 42 43 CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. KSR KUEBLER AG Data Sheet 760.56 ∙ 06/2013 Denomination Order no. Material Bonnet 5720124259B SS Cone 5610255459 SS Spindle Nut Stuffing box Base ring Packing 5650320859 5921024059B 5706010059 0100016020SI 0016001040GR SS SS SS SIL4400 Graphit 40 Seat 5604120459 SS 49 Sealing D07603121026 SS 11 Ball D054011120 SS Page 41 of 56 Gauge Valve CL 600 Type 760.57 ca. 120 Special Features 5 6 Connection chamber ■■ Quick closing lever ■■ Nipple connection to gauge ■■ Angle seat ■■ Spindle screw inside ■■ Seat renewable Design Data Operating pressure Temperature media Housing, nipple, flange SS Housing, nipple, flange CS 5 11 ca . 2 3 0 37 40 11 General Data Material - Housing, nipple, flange - Trim other materials on request Orientation Ball check diff. pressure Process connection Weight ca. 120 9 42 43 42 36 49 9 42 43 42 37 36 40 49 6 The gauge valve is to close the tank against the level gauge.It is actuated by a handwheel. As a standard an automatic ball check is integrated. The process connection is manufactured acc. tocustomer’s specification. ca . 2 3 0 Applications ca. 110 CS or SS SS horizontally, see Fig. orientation > 0,5 bar DIN / ANSI acc. to cust. spec. ca. 1,5 kg connection example process ca. 110 Orientation Examples View on top of sight glass level gauge Process connection up to 10 MPa / 600 lbs – 200...+ 400°C – 10...+ 400°C actuation right Spare parts kit BG5XSEKIT consisting of Pos 5 36 37 6 9 42 43 CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. Page 42 of 56 Denomination Order no. Material Bonnet 5720124259B SS Cone 5610255459 SS Spindle 5650320859 Nut Stuffing box Base ring Packing 5921024059B 5706010059 0100016020SI 0016001040GR SS SS SS SIL4400 Graphit 40 Seat 5604120459 SS 49 Sealing D07603121026 SS 11 Ball D054011120 SS KSR KUEBLER AG Data Sheet 760.57 ∙ 06/2013 Gauge Valve CL 600 Type 760.58 ca. 120 Applications 6 9 42 43 42 36 9 49 42 43 142 36 37 49 40 5 6 Special Features 5 ■■ Quick closing lever ■■ Nipple connection to gauge ■■ Angle seat, offset ■■ Spindle screw inside ■■ Seat renewable ca . 2 2 0 11 1 37 40 ca . 2 2 0 11 General Data Material - Housing, nipple, flange - Trim other materials on request Orientation Ball check diff. pressure Process connection Weight Design Data Operating pressure Temperature media Housing, nipple, flange SS Housing, nipple, flange CS CS or SS SS horizontally, see Fig. orientation > 0,5 bar DIN / ANSI acc. to cust. spec. ca. 1,5 kg connection example process Orientation Examples Connection chamber ca . 1 6 0 The gauge valve is to close the tank against the level gauge.It is actuated by a handwheel. As a standard an automatic ball check is integrated. The process connection is manufactured acc. tocustomer’s specification. ca . 1 6 0 ca. 120 side view top view Process connection pivoted up to 10 MPa / 600 lbs Process connection – 200...+ 400°C – 10...+ 400°C sight direction actuation right sight direction Spare parts kit BG5XSEKIT consisting of Pos 5 36 37 6 9 42 43 CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. KSR KUEBLER AG Data Sheet 760.58 ∙ 06/2013 Denomination Order no. Material Bonnet 5720124259B SS Cone 5610255459 SS Spindle Nut Stuffing box Base ring Packing 5650320859 5921024059B 5706010059 0100016020SI 0016001040GR SS SS SS SIL4400 Graphit 40 Seat 5604120459 SS 49 Sealing D07603121026 SS 11 Ball D054011120 SS Page 43 of 56 Gauge Valve CL 1500 Ø 80 8 Special Features 5 5 21 6 9 7 13 10 14 11 21 ■■ Handwheel ■■ Angle seat, offset ■■ Spindle screw inside ■■ Seat renewable 6 Ø 80 ca . 2 0 0 The gauge valve is to close the tank against the level gauge.It is actuated by a handwheel. As a standard an automatic ball check is integrated. The process connection is manufactured acc. tocustomer’s specification. 9 13 14 137 8 Connection glass tuber ca . 2 0 0 Applications 137 Type 760.01 7 10 11 General Data Material - Housing, nipple, flange - Trim other materials on request Orientation Ball check diff. pressure Process connection Weight Design Data Operating pressure Temperature media Housing, nipple, flange SS Housing, nipple, flange CS CS or SS SS horizontally, see Fig. orientation > 0,5 bar DIN / ANSI acc. to cust. spec. ca. 2,0 kg connection example process Orientation Examples Process connection top view up to 25 MPa / 1500 lbs sight direction – 200...+ 400°C – 10...+ 400°C pivoted actuation right Spare parts kit BG5XHEKIT consisting of Pos Material Bonnet 5720124159B SS 7 Cone 5610255459 SS 8 9 13 14 Page 44 of 56 Order no. 5 6 CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. Denomination Spindle 5650320759 Nut Stuffing box Base ring Packing 5921024059B 5706010059 0100016020SI 0016001040GR SS SS SS SIL4400 Graphit 10 Seat 5604120459 SS 21 Sealing D07603121026 SS 11 Ball D054011120 SS KSR KUEBLER AG Data Sheet 760.01 ∙ 06/2013 Gauge Valve CL 600 Type 760.03 ca. 120 Applications 6 9 42 43 42 9 36 42 49 43 42 1 36 49 37 6 5 Special Features 5 ■■ Quick closing lever ■■ Angle seat, offset ■■ Spindle screw inside ■■ Seat renewable 40 1 11 37 40 11 General Data Material - Housing, nipple, flange - Trim other materials on request Orientation Ball check diff. pressure Process connection Weight Design Data Operating pressure Temperature media Housing, nipple, flange SS Housing, nipple, flange CS CS or SS SS horizontally, see Fig. orientation > 0,5 bar DIN / ANSI acc. to cust. spec. ca. 2,0 kg ca . 2 2 0 ca . 2 2 0 The gauge valve is to close the tank against the level gauge.It is actuated by a handwheel. As a standard an automatic ball check is integrated. The process connection is manufactured acc. tocustomer’s specification. ca . 1 6 0 ca . 1 6 0 ca. 120 Connection glass tuber connection example process Orientation Examples top view Process connection pivoted up to 10 MPa / 600 lbs – 200...+ 400°C – 10...+ 400°C sight direction actuation right Spare parts kit BG5XSEKIT consisting of Pos 5 36 37 6 9 42 43 CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. KSR KUEBLER AG Data Sheet 760.03 ∙ 06/2013 Denomination Order no. Material Bonnet 5720124259B SS Cone 5610255459 SS Spindle Nut Stuffing box Base ring Packing 5650320859 5921024059B 5706010059 0100016020SI 0016001040GR SS SS SS SIL4400 Graphit 40 Seat 5604120459 SS 49 Sealing D07603121026 SS 11 Ball D054011120 SS Page 45 of 56 Gauge Valve CL 300 Type 760.11 Applications 0 Ø5 The gauge valve is to close the vessel against the level gauge.It is actuated by a quick closing lever. As a standard an automatic ball check is integrated. The process connection is manufactured acc. tocustomer’s specification. 85 Special Features 10 horizontally 8 mm CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. Page 46 of 56 72 > 1 bar DIN / ANSI acc. to cust. spec. ca. 5,0 kg Nominal pressure CL 300 Design temperature / Design pressure– 10...+ 243°C / 30 bar 8 11 CS SS Design Data 7 72 Orientation valve opening Material - Housing, flange - Trim other materials on request Ball check diff. pressure Process connection Weight 14 9 Ø 105 (DN 20, PN 40) General Data 6 160 ■■ Lever and quick closing ■■ Angle seat ■■ Spindle thread inside ■■ Seats and cone renewable ■■ flanged min. 170 max. 180 Pos Pcs. Denomination Order no. Material 6 1 Spindle 3094553 1.4104 8 1 Screw connect. " 1.4305 7 9 10 11 14 1 1 1 1 4 Cone Semi-lunar ring Seat Sphere Packing 3095354 " 2602C54 D054011011 0021001360GR 1.4305 1.1750 1.4305 1.4401 Reingraphit KSR KUEBLER AG Data Sheet 760.11 ∙ 06/2013 Gauge Valve CL 900 Type 760.18 The gauge valve is to close the vessel against the level gauge.It is actuated by a handwheel and quick closing lever. As a standard an automatic ball check is integrated. The process connection is manufactured acc. tocustomer’s specification. 8 9 ■■ Double shut-off with handwheel and quick closing ■■ Angle seat ■■ Spindle thread inside ■■ Seats and cone renewable ■■ flanged Orientation valve opening Material - Housing, flange - Trim other materials on request Ball check diff. pressure Process connection Weight CS SS > 1 bar DIN / ANSI acc. to cust. spec. ca. 5,0 kg CL 900 – 10...+ 350°C / 120 bar 10 Connection example process 10 69 7 8 9 13 61 17 14 ca. 315 Spare part kit BG181HEKIT (handwheel, ball) consisting of Pos 6 7 8 9 Design Data Nominal pressure Design temperature / Design pressure max. 11 horizontally 8 mm 17 14 7 Special Features General Data 13 6 ca . 1 6 0 Applications 13 14 17 Denomination Spindle Cone Screw connect. Order no. 3396G53 2811254 18202 Packing 0021001360GR Bottom ring SS 1.1003 Graphite 2586135 Seat 2790b54 69 Lens gasket 218238 Ball SS SS D07603S35028 10 11 SS 277154 Semi-lunar ring Sealing Material 1.0501 SS D054011014 SS 1.0305 Spare part kit BG181SEKIT (lever) consisting of Pos 61 7 8 9 CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. KSR KUEBLER AG Data Sheet 760.18 ∙ 06/2013 13 14 17 10 Denomination Spindle Cone Screw connect. Order no. 3397GB53 2811254 277154 Semi-lunar ring 18202 Packing 0021001360GR Sealing Bottom ring Seat D07603S35028 2586135 2790b54 Material SS SS SS SS 1.1003 Graphite 1.0501 SS Page 47 of 56 Gauge Valve CL 1500 Type 760.19 The gauge valve is to close the vessel against the level gauge.It is actuated by a handwheel and quick closing lever. As a standard an automatic ball check is integrated. The process connection is manufactured acc. tocustomer’s specification. 13 5 17 6 14 7, 8, 9 ca . 2 2 0 Applications 81 91 51 81 Special Features ■■ Double shut-off with handwheel and quick closing ■■ Angle seat ■■ Spindle thread inside ■■ Seats and cone renewable ■■ flanged General Data Orientation valve opening Material - Housing, flange - Trim other materials on request Ball check diff. pressure Process connection Weight Design Data Nominal pressure Design temperature / Design pressure max. 13 17 14 91 61 ca. 400 Spare part kit BG182HEKIT (handwheel) consisting of horizontally 8 mm CS SS > 0,5 bar DIN / ANSI acc. to cust. spec. ca. 5,0 kg CL 1500 – 10...+ 374°C / 165 bar Pos Bonnet 7 Cone 6 8 9 13 14 17 Spindle Screw connect. Order no. 3269149B 1615G53 190954 1617a53 Semi-lunar ring 18203 Packing 0026001660GI Sealing Bottom ring D07603S49040 162035 10 Seat 405F254 91 Stuffing box 1657135 81 Nut WK165835B Material 1.5415 SS SS SS SS 1.1003 Graphite 1.0501 SS 1.0501 1.0501 Spare part kit BG182SEKIT (lever, ball) consisting of 51 61 7 8 9 13 14 17 CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. Denomination 5 Pos Page 48 of 56 11 100 7,8,9 10 100 11 81 91 Denomination Order no. Bonnet 32691149B Cone 190954 Spindle Screw connect. 1696253 1617a53 Semi-lunar ring 18203 Packing (8) 0026001660GI Sealing Bottom ring Seat w. ball carrier Ball Nut Stuffing box D07603S49040 162035 418W11054 D054011011 WK165835B 1657135 Material 1.5415 SS SS SS SS 1.1003 Graphite 1.0501 SS SS 1.0501 1.0501 KSR KUEBLER AG Data Sheet 760.19 ∙ 06/2013 Gauge Valve CL 600 Type 760.68 The gauge valve is to close the vessel against the level gauge.It is actuated by a quick closing lever. As a standard an automatic ball check is integrated. The process connection is manufactured acc. tocustomer’s specification. 7 ■■ Lever, quick closing ■■ Angle seat ■■ Spindle thread inside ■■ Seats and cone renewable ■■ flanged 69 11 10 8, 9 ca. 175 horizontally, see Fig. orientation 8 mm > 0,5 bar DIN / ANSI acc. to cust. spec. ca. 5,0 kg A 235 B C D 270 Spare parts kit BG681HEKIT considering of CL 600 61 – 10...+ 300°C / 82 bar 8 7 9 13 14 KSR KUEBLER AG Data Sheet 760.68 ∙ 06/2013 290 225 Pos CS (= carbonsteel) and SS (= stainless steel type 316SS) are materials suitable for Pressure Vessels according to EN or ASME. ca. 280 Orientation CS SS Design Data Nominal pressure Design temperature / Design pressure max. 14 200 Orientation valve opening Material - Housing, flange - Trim other materials on request Ball check diff. pressure Process connection Weight 13 250 General Data 61 17 Special Features ca . 1 6 0 Applications 17 10 11 69 Denomination Spindle Cone Screw connct. Order no. 2840G53 2811254 277154 Semi-lunar ring 18202 Packing 0021001360GR Sealing Bottom ring Seat ball Lens gasket D07603S35028 2586135 2790b54 D054011014 218238 Material SS SS SS SS 1.1003 Graphite 1.0501 SS SS 1.0305 Page 49 of 56 Illumination Transparent Sight Glass Level Gauges Type 709.0XXX Applications The illuminations are designed for illuminating sight windows according to DIN 7081 and mica sight windows. By variation segment length and number of segments as well as the optical power illumination can be adapted to most applications. Can be operated in hazardous area. B SL A Special Features ■■ Even bright illumination ■■ Bulb, highlight-performance and long lifetime Material housing lamp Material reflector Dimensions - A - B Weight Design Data Ex-classification Surface temperature Ambienttemperature Alu Glass, Acryl-Glass, mirror sheet ca. 160 mm up to glass size12 ca. 200 mm from glass size 12 ca. 300 mm 1,8kg II 2 GD Ex d(Ex de) IIC T2...T6 depends on temperature class and lamp power – 50...+ 55°C Electrical Data Power supply Lamp power Illustration Lampholder Ingress protection Certificates EC-Type Examination Certificate Page 50 of 56 120 / 230 VAC max. 100 W Halogen bulb E 27 IP 66 B A SL General Data *) Type of mount varies with length, count and weight.Lamp with mount can be mounted on the right hand too. Shown level gauge only for example. CESI 01 ATEX 028 KSR KUEBLER AG Data Sheet 709.0XXX ∙ 06/2013 Sight Glass Level Gauges Connections Process connection: ■■ Flange ■■ Male thread / female thread ■■ Weld end / weld sleeve ■■ Screw joint / spherical union ■■ Further designs on rrequest Vent / Drain ■■ Plug ■■ Valve ■■ Flange piece ■■ Male thread / female thread ■■ Weld-on end / welded sleeve ■■ Further designs on rrequest KSR KUEBLER AG Data Sheet Sight Glass Level Gauges Connections ∙ 06/2013 Page 51 of 56 Sight Glass Level Gauges Accessories Frost protection Material: PMMA (Plexiglas) plate 3721000156 H plate 3721000156 light guide 3980XXXXPL light guide 3980XXXXPL Glass type, e. g. 4 = 04 H e. g. 80 mm = 04 SL Glass type L 0 72 1 2 92 117 3 142 4 167 5 197 6 227 7 257 8 297 9 317 L 10 347 11 377 12 407 13 437 14 15 477 507 H in mm covers temperature in °C below zero, standard heights: 80, 120, 180 und 200 mm 16 537 17 577 18 607 19 637 recommended types 20 677 Flat glasses acc. to DIN 7081 17 thickness 34 34 17 thickness GL GL Transparent D07081GXXXT Reflex D07081GXXXR GL e. g.. 220 Glass type GL 0 95 1 2 115 recommended types 140 3 165 4 190 5 220 6 250 7 280 8 320 GL e. g. 220 9 340 10 370 11 400 12 430 13 460 14 15 500 530 16 560 17 600 18 630 19 660 20 700 34 34 Gaskets GL GL cushion outside 352900XX05NO Glass type GL 0 95 1 115 recommended types Page 52 of 56 2 140 3 165 4 190 5 220 6 250 Gasket inside media 352900XXXX glass tyoe + 30 e. g 9 = 39 7 280 8 320 PS = Graphite/SS reinforced glass type + 30 e. g. 9 = 39 9 340 10 370 11 400 12 430 13 460 14 500 15 530 16 560 17 600 18 630 19 660 20 700 KSR KUEBLER AG Data Sheet Sight Glass Level Gauges Accessories ∙ 06/2013 34 24 24 11 Mica and gasket L L mica round 24 mm wide 0,13 thick gasket graphite with SS-inlay for mica round, 24 mm wide L mica round 34 mm wide, 0,2 – 0,3 thick corrosion protection mica size 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 L 95 115 140 165 190 220 250 280 320 340 370 400 430 460 500 530 mica round 34 mm wide 0,2 – 0,3 mm 39890800GL 39890801GL 39890802GL 39890803GL 39890804GL 39890805GL 39890806GL 39890807GL 39890808GL 39890809GL 39890810GL 39890811GL 39890812GL 39890813GL 39890814GL 39890815GL mica round 24 mm wide 0,13 mm 39897700GL 39897701GL 39897702GL 39897703GL 39897704GL 39897705GL 39897706GL 39897707GL 39897708GL 39897709GL 39897710GL 39897711GL 39897712GL 39897713GL 39897714GL 39897715GL gasket graphite-SS 24 mm wide mica package round, 24 mm wide 0,9 – 1,0 mm thick 418D10200VG 418D10201VG 418D10202VG 418D10203VG 418D10204VG 418D10205VG 418D10206VG 418D10207VG 418D10208VG 418D10209VG 418D10210VG 418D10211VG 418D10212VG 418D10213VG 418D10214VG 418D10215VG Mica packages PDesign For each mica window a mica package up to 1,7 mm thickness and a gasket for each package is needed. 39893700GL 39894700GL 39893701GL 39894701GL 39893702GL 39894702GL 39893703GL 39894703GL 39893704GL 39894704GL 39893705GL 39894705GL 39893706GL 39894706GL 39893707GL 39894707GL 39893708GL 39894708GL 39893709GL 39894709GL 39893710GL 39894710GL 39893711GL 39894711GL 39893712GL 39894712GL 1,7 mm thick 39896700GL 39896701GL 39896702GL 39896703GL 39896704GL 39896705GL 39896706GL 39896707GL 39896708GL 39896709GL 39896710GL 39896711GL 39896712GL 39893713GL 39894713GL 39896713GL 39893715GL 39894715GL 39896715GL 39893714GL 39894714GL 39896714GL PDesign [bar] package thickness 80 0,9 – 1,0 X 1,2 1,2 mm thick 1,7 120 X 150 X Dimensions in mm Corrosion protection Corrosion protection for sight glasses from water side acc.to DIN 7081 above 243 °C 1 mica sheet is needed. Pointer low water Form, size and inscription vary depending up on execution of the boiler level gauge. KSR KUEBLER AG Data Sheet Sight Glass Level Gauges Accessories ∙ 01/2013 NW Page 53 of 56 Corrosion protection with mica 82 80 operatingpressure [bar] for transparent glasses acc. to DIN 7081 As corrosion protection you shall use 1 mica sheet with 0,2 to 0,3 mm thickness fitted to the inner side of a transparent glass acc. to DIN 7081 (marking ‘waterside‘ inward). 60 II 40 I 20 0 saturated steam 0 50 100 150 200 operatingtemperature [°C] I II 250 300 243 280 saturated steam, glass without protection saturated steam, glass with mica protection Corrosion protection and anti-adhesive 34 FEP-foil thickness 0,1 mm for transparent glasses acc. to DIN 7081 up to + 200 °C, as corrosion protection or as antiblocking means for media which are adherent to glass GL 399030XX Glass type L 0 72 1 92 2 117 3 142 4 167 5 197 6 227 7 257 8 297 9 317 10 347 11 377 12 407 13 437 14 477 15 507 GL e.g. 5 = 05 16 537 17 577 18 607 19 637 20 677 Scale ■■ Foil on Aluminum graduated in cm (up to 100 °C) ■■ Foil on SS graduated in cm (up to 100 °C) ■■ SS engraving graduated in cm ■■ Pointer fo rwater low indication, material Aluminum Heating ■■ Steam heating heating connection see 700.VAR gauge body heating connection see 700.VAR gauge body Orientation of the heating connection by customers specification. Electrical heating also possible. Page 54 of 56 KSR KUEBLER AG Data Sheet Sight Glass Level Gauges Accessories ∙ 06/2013
