Brand/Product
Glynn Johnson
Date
May 2016
Subject
2016 Glynn Johnson Canadian PB2 Changes
Glynn Johnson Price Book
•
•
•
•
•
•
•
•
Page 17 – Push/Pull Latch Options – Corrected the List Deduct comments from B and SOC suffix
to EO and EN suffix lines
Page 17 – Push/Pull How to Order – Removed EL and EU from list of options. These are included
when selecting the 9092EL, 9092EU, 9095EL, or 9095EU Lock Functions
Page 35 – HL6M Lock Body – 9080EL Removed, Replaced by HL6M Lock Body – 9092EL with no
Price Change
Page 35 – HL6M Lock Body – 9080EU Removed, Replaced by HL6M Lock Body – 9092EU with no
Price Change
Page 35 – HL6M Lock Body – 9080EL/RX Removed, Replaced by HL6M Lock Body – 9092EL/RX
with no Price Change
Page 35 – HL6M Lock Body – 9080EU/RX Removed, Replaced by HL6M Lock Body – 9092EU/RX
with no Price Change
Page 35 – HL6M Lock Body – 9082EL Removed, Replaced by HL6M Lock Body – 9095EL with no
Price Change
Page 35 – HL6M Lock Body – 9082EU Removed, Replaced by HL6M Lock Body – 9095EU with no
Price Change
Price book 2
Effective February 1, 2016 • Rev. 5/16
This price list supersedes and cancels all previous price lists. Prices shown are subject to change without notice.
Administrative Offices
1076 Lakeshore Road East
Mississauga, ON L5E 1E4
allegion.ca
Placing orders
You can place orders with Allegion via the fax number or email listed below:
Fax#: 1-800-209-4734
Email: canada.orders.service@allegion.com
Customer Care
Our Customer Care Representatives are available for questions or assistance.
You can reach them at 1-800-900-4734 TTY: 1-866-620-4011
Technical Product Support
Phone:1-800-900-4734
Fax:1-800-209-4734
Email:canada.techservices@allegion.com
2
Price Book 2
Effective February 1, 2016 • Rev. 5/16
Table of Contents and Finish List
Customer Service Telephone and Fax Numbers...................................... 2
Finish List.........................................................................................see below
Terms and Conditions..............................................................................4 - 7
Finish List (Nearest US and BHMA Equivalents)
PRODUCTS
Overhead Holders & Stops
Function & Option Guide.........................................................................8
How to Order..............................................................................................8
70/79 Series Surface................................................................................9
81 Series Surface...................................................................................... 10
90 Series Surface......................................................................................11
100 Series Concealed...............................................................................12
410 Series Concealed...............................................................................13
450 Series Surface...................................................................................14
280 Series (Sensaguard).......................................................................15
Push/Pull (Hospital) Latches
HL6 Push/Pull Latches...........................................................................16
PL7 & PL8 Privacy Latches.....................................................................16
HL6 with Mortise Locks........................................................................... 17
Ordering Guide for Engraved Latches..................................................18
PARTS
Parts for 70 and 79 Series Overhead Holders & Stops.............20-22
Parts for 80/81 Series Overhead Holders & Stops..................... 22-23
Parts for 90 Series Overhead Holders & Stops...........................24-25
Parts for 100 Series Overhead Holders & Stops.........................26-27
Parts for 410/450 Series Overhead Holders & Stops............... 28-30
Parts for 280 Sensaguard Overhead Holder.....................................30
Parts for HL6/PL7/PL8 Series Push/Pull Latches......................31-36
U.S. #
US3
US4
US10
US10B
US26
US26D
US28
US32
US32D
313AN
BHMA #
605
606
612
613
625
626
628
629
630
710
Description Brass, Bright
Brass, Satin
Bronze, Satin
Bronze, Dark Oxidized Satin, Oil Rubbed
Chromium Plated, Bright
Chromium Plated, Satin
Aluminum, Clear Anodized, Satin
Stainless Steel, Bright
Stainless Steel, Satin
Aluminum, Dark Bronze Anodized
GlynnJohnson
Finish # BHMA # The following are powder-coat
painted finishes:
SP10691 Bronze
SP4706Brass
SP28 689
Aluminum
SPBLK
622
Black SP313
695
Dark Bronze
652
652
Chrome-Like Coating on Steel
For a list of available BAA/ARRA compliant products please
contact your local SSC or sales representative to see the
Allegion BAA/ARRA catalog.
Warranty....................................................................................................... 37
Price Book 2
Effective February 1, 2016 • Rev. 5/16
3
Allegion Canada Inc. General Terms and Conditions of Sale and Service
1. GENERAL/ACCEPTANCE. (a) This Agreement contains the only terms and conditions
by which Company will quote and sell Deliverables to Customer; (b) The terms “purchase
order” or “order” for the purposes of this Agreement include the term “request for quotation,”
as appropriate; (c) This Agreement supersedes all pre- printed or boilerplate terms and
conditions set forth in any purchase order issued by Customer; (d) No reference herein to
Customer’s purchase order will in any way incorporate different or additional terms and
conditions, all of which Company hereby expressly objects to; (e) ANY ACCEPTANCE BY
COMPANY OF CUSTOMER'S PURCHASE ORDER IS EXPRESSLY CONDITIONED ON
THE CUSTOMER'S ASSENT TO AND ACCEPTANCE OF THE TERMS AND CONDITIONS
CONTAINED IN THIS AGREEMENT; (f) Company reserves the right to decline any order, in
whole or in part, for any reason.
2. ORDERS.
a. Order Processing. When Customer wishes to place an order for Deliverables, it will
deliver to Company a purchase order. All such purchase orders must (i) be in a written format
acceptable to Company, (ii) be legible, (iii) include a purchase order number, (iv) include
Customer’s account number, part number and pricing (v) include, if applicable, any special
factory instructions, and requested specifications regarding a particular finish, handing,
design, backset, or strike, and (vi) reference any applicable pricing discounts under an ongoing
buying program or based on a written quote from Company, along with the applicable buying
program number or quotation number.
b. Minimum Orders. In the event the order value does not meet any required minimum
net Deliverable value of $250.00, Company may, at its sole discretion, (i) apply a minimum
order charge; (ii) reject the order, or (iii) waive the requirement, provided that the waiver of
a requirement for one order shall not constitute a waiver of the requirement for any future
orders.
c. Acceptance of Purchase Orders. Company will endeavor to (i) acknowledge receipt
of each purchase order issued in accordance with this Agreement, and (ii) notify Customer
whether Company accepts or rejects the purchase order. If Company fails to accept or reject
a purchase order within a reasonable time period, such failure to respond will be deemed a
rejection of the entire order.
d. Changes to Order/ Cancellation of Orders. Customer acknowledges that (i) requesting
a Change Order may cause a delay in the scheduled shipment date, a longer lead time or
result in a new scheduled shipment date; (ii) Orders for stocked (core items) cannot be
changed; (iii) Changes to non-stocked product orders will be allowed only in instances where
the material has not yet been scheduled into production and/or assembly has begun. Any
handling charge resulting from an authorized change order will be billed to the Customer;
(iv) If Customer cancels an order or portion of an order that includes Deliverables that have
been manufactured and prepped for shipping, a 50% restocking fee will apply; and (v)
Customer cannot change or cancel credential orders, reader orders, biometrics orders or any
non-cataloged, special, Custom or nonstandard items once they have been placed and will be
subject to a cancellation charge of 100% of the acknowledged price.
3. PRICES, INVOICES AND PAYMENT.
a. Prices. The prices in Company’s Price Book are subject to change at any time, without
notice to Customer. Company may charge Customer additional amounts if Customer requests
special packing, marking, shipment, product modification, or engineering services. Oral prices
specified by Company are null and void. Quote numbers must be referenced on Customer’s
purchase order in order for the Company’s quoted pricing to apply. Orders that do not
reference a quote number will receive standard buying program pricing or book net pricing.
Quoted prices are for those specific products quoted for a specified job, and are subject to the
Price Book in effect at the time the quote was issued by Company.
b. Taxes. Prices do not include any present or future federal, provincial, or local property,
license, privilege, sales, use, excise, gross receipts, or other like taxes or assessments which
may result from transactions or any services performed in connection therewith and such
taxes or other charges are the responsibility of Customer.
c. Payment Terms. Company will deliver to Customer an invoice with each shipment of
Deliverables hereunder. Customer will pay all invoiced amounts within 35 days of the invoice
date, provided that Customer may take a 2% discount if Customer pays in cash and Company
receives said payment within 20 days of the invoice date. Past due invoices will be subject to
a late payment service charge of 1.5% per month on any overdue unpaid balance, equivalent
to 18% per annum, or the maximum rate permitted by law, whichever is less. Customer
shall reimburse Company for all costs of collection, including, without limitation, reasonable
attorneys' fees, for any overdue amount owed by Customer to Company, and such collection
costs shall also be subject to interest charges.
4. QUOTATIONS.
a. Project Quotations. Project or new construction quotes are restricted to the specific
project quoted for the quantities referenced on the quote. Company reserves the right to
require proof of sale of Company products for any quoted project.
b. Stock Quotations. Deliverables fulfilling stock quotations may only be used for the
stocking of the Customer’s shelves. Deliverables purchased under Stock Quotations can be
redistributed to other Customer branch locations or re-sold to other resellers or used for
aftermarket sales, end-user annual contracts or sold over the counter to any walk in trade.
c. General. All quotes are subject to this Agreement, unless otherwise specified by
Company, and are subject to change at any time prior to Company’s acceptance of a purchase
order referencing the applicable quote number. Company, its representatives and employees
reserve the right, in their sole discretion and for any reason, to refuse a Customer’s request
to quote a price other than the standard list price, regardless of whether Company or its
representatives or employees have previously quoted discounted prices to the Customer on
some or all of its orders.
5. SECURITY INTEREST. Customer grants Company, and Company retains, a purchase
money security interest and lien on any and all of Customer’s rights, title and interest in
each Deliverable sold by Company to Customer, wherever located, until the invoice for the
applicable Deliverable(s) is paid in full, including any late charges and costs of collection.
Customer authorizes Company to, and will assist Company in, taking all necessary steps to
perfect and maintain Company’s interest in such Deliverables.
6. CREDIT TERMS. Unless Customer pre-pays all of its purchase orders in advance, its
purchase orders will be subject to the credit limit and other terms of credit (“Credit Terms”)
set forth in Company’s credit application, which Credit Terms Customer acknowledges are
subject to change by Company at any time. Company reserves the right to request payment in
advance of shipment or any order or to request adequate assurances for Customer’s payment
of an order and may withhold or stop shipment, without any liability to Company, until
Customer submits payment or adequate assurance of payment.
4
7. RESALE OF DELIVERABLES. Customer agrees and warrants that it will offer Company
products in support of Company-written specifications and will maintain sufficient inventory
to adequately support End Users, installers, and/or general contractors’ needs. Company
may implement an MSRP or resale pricing program at any time. Failure to comply with such
programs will be considered a material breach of this Agreement, and will entitle Company
to immediately terminate this Agreement and/or Customer’s ability to distribute Company’s
products. Customer shall, at its own expense, gain and maintain sufficient knowledge of the
industry and products competitive with Deliverables so as to be able to (a) explain in detail to
End Users, installers, and/or general contractors the differences between the Deliverables and
competing products, (b) ensure that an adequate number of trained, capable and qualified
technical personnel with sufficient knowledge of the Deliverables and who have obtained all
necessary licenses and permits are available to assist End Users, installers, and/or general
contractors, and (c) respond to such End Users, installers, and/or general contractors with
respect to the general operation and use of the Deliverables including, but not limited to, (1)
acting as a liaison between the End Users, installers and/or general contractors and Company
in matters requiring Company participation, (2) providing general product information and
configuration support on standard protocols and features, (3) collecting relevant technical
problem identification information, and (4) posting and distributing any warranty information
concerning the Products in accordance with Company’s instructions. Customer is responsible
for all service and support resulting from the re-sale of any Deliverable to End-Users, installers
and/or general contractors, examples of which may include, but are not limited to, support
activities such as installation, initialization, software set-up, training, trouble-shooting,
technical support and field service. In the event Customer is unwilling or unable to perform
said support activities, Company reserves the right to recover from Customer any and all
expenses incurred by Company to resolve the aforementioned End-User, installer and/or
general contractor issues. Technical product training is recommended for Customer in order to
fully service and support Deliverables purchased from Company that are resold to End-Users,
installers and/or general contractors.
8. DEFAULT. If Customer is in default of payment or otherwise with respect to any purchase
order or other contract with Company, Company shall have the right, in addition to all other
legal remedies and without prejudice to any of its right hereunder, to defer further shipments
under that or any other purchase order until such default is corrected and to declare all
outstanding bills of Customer to be immediately due and payable.
9. INSPECTION AND DELIVERY.
a. Inspection. Customer will inspect all Deliverables immediately after receiving them.
Customer will be deemed to have accepted the Deliverables unless Customer notifies
Company in writing of any nonconformance within 10 from the date of delivery of receipt
of material and provides Company written evidence reasonably documenting that
nonconformance. Inspection of Deliverables at Company's facility is not permitted.
b. Delivery. Delivery schedules for Deliverables are based upon current production
capacities, material or component availability, and inventory, and may be changed by
Company as conditions require. Delivery schedules for services are based upon Company’s
prompt receipt of, and prompt access to, Customer’s equipment and all information necessary
to complete the services. In no event will any delivery date be construed as falling within the
meaning of “time is of the essence.” Partial delivery shall be accepted by Customer and paid
for at the price and on the terms stated herein. Any partial delivery shall constitute a separate
sale, and payment shall be separately made when due. If any part of a delivery hereunder
is not delivered by Company in accordance with Customer’s purchase order, this Agreement
shall not be affected thereby.
10. TITLE & RISK OF LOSS. Unless otherwise specified by Company, (i) where the
Customer is located in Canada, all Deliverables will be sold “Uniform Commercial Code, FOB
MISSISSAUGA, Company's Distribution centre”; title and risk of loss will pass to Customer
upon delivery to the carrier at Company's Distribution centre, Customer agrees, upon request,
to do all things and acts necessary to protect Company’s interest by adequately insuring the
Deliverables against loss or damage from any cause and to have Company named as an
additional insured as well as to perfect any security interest pursuant to Section 5 herein.
11.SHIPPING & SHIPPING PROGRAMS.
a. Freight Charges. Company will ship all Deliverables in accordance with Company’s freight
shipment guidelines or Customer programs provided by Company.
b. Packing and Marking. Company will pack, mark, and ship Deliverables according to its
standard procedures for shipment, unless the parties agree, in writing, that Company will
comply with any special instructions provided by Customer. Special instructions may result in
an increased price.
12. CLAIMS. All claims must be submitted in writing to Company as follows: (i) All claims
for prices must be submitted within thirty-five (35) days from date of invoice; (ii) All claims
regarding Deliverable quantity or incorrect orders must be submitted within ten (10) days
from delivery of the order; (iii) All claims for damage to Deliverables (while in the care,
custody, and control of customer) must be submitted within thirty-five (35) days from the
date of invoice; (iv) All claims for loss or damage to Deliverables while in the care, custody,
and/or control of a carrier will be the responsibility of Customer, unless otherwise agreed by
the parties.
13. PRODUCT CHANGES. Company’s product policy is one of ongoing update and revision,
and accordingly, Company reserves the right to change, without notice, the design of, or the
process of manufacturing, the Deliverables covered by this Agreement.
14. PRODUCT RETURNS. Unless otherwise agreed by the parties in writing, Deliverables
that are correctly furnished by Company per the purchase order may not be returned
unless Customer receives written authorization from Company. If returns are authorized
by Company, a return merchandise authorization (“RMA”) number must be provided by
Company. Deliverables identified under such RMA must be returned to Company within 90
days of issuance of the RMA. Such RMA number and any accompanying RMA documents, the
original invoice number, and a written explanation for the return must be included with the
returned Deliverables in order for Company to inspect and approve a credit for the return. For
warranty returns, a credit in the amount of the original purchase price will only be issued if,
after Company’s receipt and inspection of the returned Deliverables, Company confirms, in its
sole discretion, the defect is valid and approves the return. For non-warranty returns, (a)
in the event Company approves such a return, a credit will be made to Customer’s account
in the amount of the original purchase price less freight and a handling charge of 25% of the
net material on the original invoice for stocked product and 50% of the net material on the
original invoice for non-stocked product; and (b) Only Deliverables that are new, current,
Price Book 2
Effective February 1, 2016 • Rev. 5/16
standard, non- obsolete, non-specially manufactured, unused, in their original condition as
at the time of sale by Company to Customer, in their original packaging and in Customer’s
inventory less than 180 days from the date of shipment by the Company may be considered
by Company for return. Such credit will only be issued if, after Company’s receipt and
inspection of Deliverables, Company approves the return. The amount of final credit will be
determined upon receipt at the factory and following Company’s inspection and analysis of
the condition of the returned material. Company retains the right to deny credit to anyone
for any reason.
15. CONFIDENTIAL INFORMATION.
a. Non-Use And Non-Disclosure. Customer shall not use the Confidential Information of
the Company except for the purpose of performing its obligations under this Agreement or
exercising the rights granted herein (the “Purpose”). Customer shall protect Confidential
Information of the Company from disclosure and unauthorized use in the same manner
that it protects its own Confidential Information, but in no event shall such standard of
care be less than reasonable care. Customer may disclose Confidential Information of the
Company only to its employees who require such information for the Purpose and who are
subject to confidentiality obligations at least as protective as those set forth herein.
b. Proprietary Information and Advice. (a) All designs, data, and specifications provided
by Company are proprietary and may not be disclosed or reused by Customer without the
prior written consent of Company; (b) Company assumes no obligation or liability for any
advice given by Company, the results obtained, or damages incurred as a result of such
advice, and all such advice is given and accepted at Customer’s risk.
c. Return. Upon the termination or expiration of this Agreement or upon the request
of the Company, the Customer agrees to end all further use of, to immediately return to
the Company the original version of, and to delete or destroy all copies of, any and all
Confidential Information of the Company.
16. TRADEMARKS. Except as agreed to by Company in writing, Customer agrees not to
(a) use Company’s name in any form of publicity; or (b) use, create, register or market,
directly or indirectly, in whole or in part, Company’s names, logos, brands, or any other
trademarks, or names that are now or may hereafter be owned by Company, as part of
Customer’s corporate or business name, as part of an internet domain name, uniform
resource locator (URL), or in any way connected with Customer’s business, trade address or
other designations. Upon termination of this Agreement, any use of Company’s trademarks
or names will be immediately discontinued.
17. LIMITED WARRANTY.
COMPANY MAKES NO OTHER WARRANTIES EXCEPT THOSE STATED IN
COMPANY’S LIMITED WARRANTY IN EFFECT ON THE DATE COMPANY
ACCEPTS EACH APPLICABLE PURCHASE ORDER (“LIMITED WARRANTY”).
THE LIMITED WARRANTY MAY BE FOUND IN THE APPLICABLE PRICE BOOK
AND ON THE ALLEGION CUSTOMER WEBSITE, WHICH TERMS ARE EXPRESSLY
INCORPORATED HEREIN BY REFERENCE. COMPANY WILL MAIL CUSTOMER A
HARD COPY OF THIS WARRANTY UPON CUSTOMER’S WRITTEN REQUEST. IN
THE EVENT THAT CERTAIN DELIVERABLE WARRANTIES ARE NOT FURNISHED
BY THE COMPANY TO CUSTOMER, COMPANY WARRANTS ONLY TO CUSTOMER
THAT THE DELIVERABLES WILL BE FREE FROM DEFECTS IN MATERIAL AND
WORKMANSHIP FOR A PERIOD OF 12 MONTHS FROM THE DATE OF SHIPMENT OF
THE DELIVERABLES. COMPANY’S SOLE OBLIGATION UNDER THIS WARRANTY
IS LIMITED TO REPAIRING OR REPLACING, AT COMPANY’S OPTION, THE
DEFECTIVE DELIVERABLE, PROVIDED WRITTEN NOTICE OF THE DEFECT
OR NONCONFORMANCE IS PROVIDED BY CUSTOMER WITHIN 30 DAYS OF
DISCOVERY OF THE DEFECT OR NONCONFORMANCE. COMPANY DISCLAIMS
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE
DELIVERABLES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
OF NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR
PURPOSE.
a. Exclusions. The provisions of this Limited Warranty do not apply to Deliverables that:
(A) are not the proper size for the application; (B) are not installed in accordance with
Company’s published installation instructions; (C) are installed with improper or incorrect
parts and/or are used for purposes for which they are not designed or intended;
(D) have been repaired or altered without the Company’s prior written consent; (E) have
been subjected to misuse, abuse, negligence or accident; (F) have been improperly stored,
installed, maintained or operated; (G) have been used in violation of written instructions
provided by Company to Customer; (H) have been subjected to improper temperature,
humidity, or other environmental conditions, or (I) have been affected by normal wear
and tear. In addition, the provisions of this Limited Warranty do not apply to any defects
or issues with the design or performance of equipment or products not manufactured
by Company, nor does it apply to any code compliance or permit requirements for the
assembly, installation, erection or construction of any goods. Company is not responsible
for loss or damage resulting from use of Deliverables in conjunction with parts or systems
not manufactured by Company. Accessories or products furnished by the Company, but
manufactured by others, shall carry whatever warranty the manufacturers have conveyed
to the Company and which can be passed to Customer.
b. Services. Company warrants that its services will be free from defects in material
and workmanship for a period of 12 months from the date of completion of the particular
items of service. Company’s sole obligation under this service warranty is limited to repair
or reperformance, at its option of the service, provided however, if repair or reperformance
is either impractical or impossible, the Company will refund to Customer that portion
of the price paid to Company for any defective service, provided written notice of the
defect or nonconformance is provided by Customer within 30 days of discovery of the
nonconformance.
c. Notification. Customer agrees to immediately notify Company in writing if any claim is
made against Customer for any damages caused by any modules, parts, products, service or
other Deliverables which may be the direct result of any defect in the manufacture of such
aforementioned products. Customer agrees to cooperate with Company and its counsel in
the defense of such claim and Customer agrees not to settle such claim without Company’s
written consent. If Customer fails to notify Company of such claim or fails to cooperate in
such defense as aforesaid, then Company shall be discharged from any obligations under
this Section and shall have no further liability to Customer.
d. Exceptions. The following costs and expenses are not covered by the provisions of
these limited warranties: (i) labor costs for the removal and reinstallation of Deliverables
or other manufacturer’s products; (ii) shipping and freight expenses required to return
Deliverables to Company; (iii) normal maintenance; and (iv) economic losses. In addition,
the provisions of this warranty are not applicable to anything other than defects in
Company’s material (products only) or workmanship.
18. LIMITATION OF REMEDIES.
CUSTOMER'S EXCLUSIVE AND SOLE REMEDY ON ACCOUNT OF, OR IN RESPECT
OF, THE FURNISHING OF NON-CONFORMING DELIVERABLES, SHALL BE TO (A)
SECURE REPAIR OR REPLACEMENT OF THE PRODUCTS; OR (B) SECURE REPAIR
OR RE- PERFORMANCE OF THE SERVICES OR TO OBTAIN A REFUND OF THE PRICE
PAID FOR THE DEFECTIVE SERVICE, ALL AT COMPANY’S OPTION. IN NO EVENT
WILL THE COMPANY'S MAXIMUM LIABILITY EXCEED THE SELLING PRICE FOR THE
DELIVERABLE. THE WARRANTY, OBLIGATIONS AND LIABILITIES OF COMPANY
(INCLUDING ITS SUPPLIERS) AND THE RIGHTS AND REMEDIES OF CUSTOMER
ARE EXCLUSIVE AND ARE IN LIEU OF AND CUSTOMER HEREBY WAIVES AND
RELEASES ALL OTHER WARRANTIES, OBLIGATIONS, REPRESENTATIONS
OR LIABILITIES EXPRESS OR IMPLIED ARISING BY LAW, IN CONTRACT, TORT
(INCLUDING NEGLIGENCE OR STRICT LIABILITY) OR OTHERWISE, INCLUDING
BUT NOT LIMITED TO (I) ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE OR ANY WARRANTY IMPLIED THROUGH
COURSE OF PERFORMANCE, COURSE OF DEALING, OR USAGE OF TRADE OR
(II) CLAIMS ARISING OUT OF THE NEGLIGENCE OF COMPANY OR COMPANY’S
SUPPLIERS OR (III) ANY OTHER CLAIM ARISING OUT OF, CONNECTED WITH, OR
RESULTING FROM THE PERFORMANCE OF COMPANY OR FROM THE DESIGN,
MANUFACTURE, SALE, REPAIR, LEASE OR USE OF THE DELIVERABLE, OR ANY
COMPONENT THEREOF, DELIVERED OR RENDERED HEREUNDER OR OTHERWISE.
19. INDEMNIFICATION AND LIMITATION OF LIABILITY.
a) Customer shall indemnify, defend and hold Company, and its officers, directors,
employees, customers, Affiliates, suppliers, users and agents, (collectively the
“Indemnitees”) harmless from and against any and all damages, claims, losses, expenses,
costs, obligations, liabilities, including without limiting the generality of the foregoing,
liabilities for court costs and attorneys’ fees, suffered directly or indirectly by an Indemnitee
by reason of, or arising out of any injury, death or loss to any person, or injury to any
property (collectively, “Damages”), received or sustained by any person(s) or property,
arising out of, occasioned by, attributable or related to i) any breach of any representation
or warranty made by Customer, its officers, directors, employees, affiliates, users, agents,
representatives or customers to Company or any third party, (ii) any failure by Customer
to perform or fulfill any of its covenants, acts and/or omissions to Company or to any third
party, or (iii) any litigation, proceeding or claim by any third party relating in any way to the
obligations of Customer and/or the Deliverables sold by Company to Customer hereunder.
Customer shall not consummate any settlement of any indemnified claim without the
Indemnitees’ prior written consent. Customer’s obligation to indemnify Indemnitees will
continue in full force and effect notwithstanding the termination or expiration of any order
under this Agreement. In any claim against an Indemnitee by an employee of Customer or
any subcontractor or anyone directly or indirectly employed by any of them or anyone for
whose acts they may be liable, the indemnification obligations set forth in this Section shall
not be limited in any way by or for Customer or any subcontractor under any applicable
worker’s compensation act, disability or other employee benefit act. This provision shall
survive termination of any order or Agreement. IN NO EVENT WILL COMPANY, ITS
OFFICERS, DIRECTORS, EMPLOYEES, CUSTOMERS, AFFILIATES, USERS AND
AGENTS, (NOR COMPANY’S SUPPLIERS) BE LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND
OR NATURE UNDER ANY CIRCUMSTANCES INCLUDING, BUT NOT LIMITED TO,
LOSS OF USE OF THE PRODUCTS, SERVICE INTERRUPTION, LOSS OF PROFITS,
LOSS OF REVENUE, LOSS OF INTEREST, LOST GOODWILL, LOSS OF DATA, WORK
STOPPAGE, IMPAIRMENT OF OTHER GOODS, LOSS BY REASON OF SHUTDOWN
OR NON-OPERATION, INCREASED EXPENSES OF OPERATION, OR CLAIMS OF
CUSTOMER'S CUSTOMERS, OR ANY OTHER LOSSES OR DAMAGES ARISING
OUT OF ANY LACK OR LOSS OF USE OF THE DELIVERABLES WHETHER BASED
ON CONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO, STRICT
LIABILITY OR NEGLIGENCE), PATENT INFRINGEMENT, OR OTHERWISE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
b)INTELLECTUAL PROPERTY INDEMNITY. Company makes no representation or
warranty to the Customer that the Deliverables shall not infringe any intellectual property
rights including, without limitations, claims arising from patent, copyright, trademark, trade
secret, or other intellectual property infringement. Customer agrees to hold Company
harmless from and defend the Company against any such claim of intellectual property
infringement, including any Damages resulting from that claim, the cost of complying
with any preliminary or permanent injunction, and all other costs of defense (including the
attorneys’ fees and costs), in connection with the foregoing.
c) To the extent that applicable law does not permit any limitations set out in this
Agreement, such limitation shall not be applied or invoked. Nothing in this Agreement will
be interpreted to disclaim liability of Company or the Indemnitees for gross negligence or
willful misconduct. The limitations of remedy and liability herein shall not be interpreted to
affect Company’s obligations, if any, for claims for (i) property damage, (ii) personal injury,
or (iii) wrongful death asserted by persons who are not parties to or beneficiaries of this
Agreement. Further, the limitations of remedy and liability herein shall not be interpreted
to limit Company’s or Customer’s right, if permitted by applicable law, to assert a claim for
contribution among joint tortfeasors in connection with a claim by a person who is not a
party to this Agreement.
20. CERTIFICATIONS. Certification of Deliverables for compliance with UL, cUL and ANSI
standards are tested and performed by third-party independent laboratories. Any field
modification or alteration of certified Deliverables will void certification and Company is not
liable to Customer to certify any modified or altered Deliverable.
21. TERM FOR CLAIMS. NO ACTION ARISING OUT OF ANY CLAIMED BREACH OF
THIS AGREEMENT BY COMPANY MAY BE BROUGHT BY CUSTOMER MORE THAN
ONE (1) YEAR AFTER THE CAUSE OF ACTION HAS ARISEN.
22. CONSUMER PRODUCTS
WITH RESPECT TO “CONSUMER PRODUCTS” AS DEFINED UNDER THE MAGNUSONMOSS WARRANTY ACT (“MMWA”), THE FOLLOWING STATEMENTS ARE MADE. (A)
SOME STATES OR LOCAL LAWS DO NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU;
(B) IF ANY IMPLIED WARRANTY IS PROVIDED UNDER THE MMWA, IT IS LIMITED
TO THE DURATION OF THE WARRANTY PROVIDED IN SECTION 18 ABOVE. (C)
SOME STATES OR LOCAL LAWS DO NOT ALLOW THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION
OR EXCLUSION MAY NOT APPLY TO YOU; AND (D) THIS WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY
FROM STATE TO STATE OR LOCATION TO LOCATION.
Price Book 2
Effective February 1, 2016 • Rev. 5/16
5
23. FORCE MAJEURE/EXCUSABLE DELAY. Any delay or failure of Company to perform
its obligations hereunder will be excused to the extent that it is caused by an event or
occurrence beyond Company’s control such as, by way of example and not by way of
limitation, acts of God, acts by any governmental authority (whether valid or invalid),
governmental laws and regulations not presently in effect, fires, floods, windstorms,
explosions, riots, natural disasters, wars, sabotage, accidents, labor problems (including,
without limitation, lockouts, strikes, and slowdowns) at Company's facility, its source plant
or their suppliers, inability to obtain power, material, labor equipment, or transportation, or
court injunction or order. The delivery date will be extended for a time equal to that of the
delay and the schedule for Company’s performance will be deemed adjusted to that effect.
24. ENTIRE AGREEMENT AND AMENDMENT. This Agreement, together with the
attachments, exhibits, webpages, or supplements specifically referenced and incorporated
herein, constitute the entire agreement between Company and Customer with respect to
the matters contained herein and supersede all previous communications, representations,
or agreements, either oral or written between Company and Customer. No agreement or
understanding varying or expanding this Agreement will be binding upon either party unless it
is in writing and signed by a duly authorized representative of each party hereto.
25. CONFLICTS. In the event of any conflict or inconsistency between the terms of any
agreement, or any part of an agreement or the various documents (including, but not
limited to, electronic documents) between Company and Customer, unless the parties
agree otherwise in writing, the various components of the agreements shall be given the
following precedence (in descending order of precedence): a) any master agreement or long
term agreement between Company and Customer; b) any specific terms, conditions and/
or warranties of the individual products or Deliverables; c) the terms and conditions of this
Agreement, and d) any purchase order.
26. UNSATISFACTORY CREDIT/TERMINATION FOR INSOLVENCY OR DEFAULT.
Customer shall furnish Company with statements evidencing Customer’s financial condition
as Company may, from time to time, reasonably request, and shall notify Company
immediately of any and all events that may have a material adverse effect on Customer’s
business or financial condition. If Company determines, in its sole discretion, that Customer’s
financial condition or creditworthiness is inadequate or unsatisfactory, then in addition to
Company’s other rights, Company may without liability or penalty, take any of the following
actions: (i) modify the payment terms for any outstanding and/or future purchases; (ii)
cancel any previously accepted orders; (iii) delay any further shipment of Deliverables to
Customer; or (iv) any combination of the above.
Company may immediately terminate an order from Customer by giving written notice to
Customer in the event of the happening of any of the following or any other comparable
event: (i) insolvency of the Customer; (ii) filing of a petition in bankruptcy by or against the
Customer; (iii) appointment of a receiver or trustee for the Customer; (iv) execution of an
assignment for the benefit of creditors by the Customer, all of which will allow Company to
demand reclamation of all affected orders; (v) Customer ceases or threatens to cease to
trade; (vi) Company determines that Customer does not meet or no longer meets the credit
requirements of Company or Customer’s credit account is closed; (vii) any Customer violation
of law, specifically including, without limitation, those laws set forth in this Agreement.
In the event of termination in accordance with this section, Company will not be obligated
to accept any existing or additional orders from Customer and Company will be released
from its obligation to deliver under orders accepted prior to such termination. The rejection
or termination of any order by Company will not entitle Customer to any termination or
severance compensation, or to any payment in respect to any goodwill established by
Customer, or render Company liable for damages on account of the loss of prospective
profits, or on account of any loss, expenditure, investment or obligation incurred or made by
Customer.
No action taken under this Section 26 by Company (nor any failure of Company to act under
this Section 27) will constitute a waiver by Company of any of its rights to enforce Customer’s
obligations, including the obligation of Customer to make payments as required under this
Agreement. Upon termination of any order, all amounts owed by Customer to Company will
become immediately due and payable, whether or not otherwise then due or payable.
27. CREDIT RISK ON RESALE OF DELIVERABLES. Customer is responsible for all credit
risks with respect to, and for collecting payment for, all Deliverables sold to third parties
(including End Users, installers, and/or general contractors) whether or not Customer has
made full payment to Company for such Deliverables. The inability of Customer to collect
payment for any Deliverable shall not affect Customer’s obligation to pay Company for any
Deliverable.
28. GOVERNING LAW; VENUE; AND EXPENSES. Any dispute or claim relating to this
Agreement shall be governed by and construed according to the laws of the Province of
Ontario and not by the provisions of the 1980 United Nations Convention on the International
Sale of Goods. Customer agrees to pay for all expenses (including, but not limited to,
collection costs, court costs and attorneys’ fees) incurred by Company in enforcing the
obligations of Customer under this Agreement.
29. RELATIONSHIP OF THE PARTIES. Nothing in this Agreement or any other document
creates an employment, partnership, joint venture, or agency relationship between Company
and Customer, including that of franchisee/franchisor. No party will have any power or
authority to enter into any commitment on behalf of or otherwise bind the any other party
on any matter. No employee of Customer will be deemed to be an employee of Company.
If any provision of this Agreement is deemed to create a franchise relationship or business
opportunity between the Parties, then Company may terminate this Agreement or the
Parties shall negotiate in good faith to modify this Agreement so as to effect the original
intent of the Parties as closely as possible in a mutually acceptable manner in order that
the transactions contemplated hereby are consummated as a reseller agreement and not a
franchise or business opportunity agreement.
30. SETOFF. Customer does not have the right to setoff or to back charge against any
amounts which become payable to Company under this Agreement or otherwise. Company
will not accept responsibility for backcharges for the cost of material or labor by Customer or
any third party.
31. ELECTRONIC COMMUNICATIONS AND ELECTRONIC SIGNATURES. Both parties
expressly agree to electronic transactions and acknowledge that documents they sign
6
electronically will bind them to the same extent as a paper signature. Customer represents
and warrants to Company that only employees authorized to bind Customer legally shall
electronically sign any document under this Agreement. Customer shall comply with any
method of electronic communication/payment processing specified by Company, including
electronic funds transfer, pay-on-receipt processes/systems, order transmission, releases,
electronic signature, and electronic communication systems, including, without limitation,
the use of electronic data interchange ("EDI") portals. Notwithstanding the foregoing,
e-mails, even those containing a signature block of one of Company’s representatives, shall
not constitute a signed writing.
32. COMPLIANCE WITH APPLICABLE LAWS.
a. General. Company and Customer will comply with all applicable provincial laws,
regulations, codes, ordinances and orders that pertain to the Deliverables.
b. The Customer acknowledges and agrees that: (i) it shall not violate applicable laws
and regulations in performing its duties under this Agreement; (ii) it does not and shall not
engage in any conduct that shall violate any applicable anti-bribery or anti-corruption laws
or regulations; (iii) it (and its owners, officers, directors, employees and agents) shall not
pay, offer, promise or authorize the payment of, either directly or indirectly, anything of value
(including but not limited to cash, gifts and entertainment) to (a) any government official
or employee of any government; (b) any official or employee of any department, agency, or
instrumentality of a government; (c) any employee of any corporation or entity owned or
controlled by a government; (d) any family member of such officials or employees; (e) any
political party, party official, or political candidate; or (f) any other persons, owners, officers,
directors, employees and agents of any corporation or entity; to improperly or illegally assist
in obtaining or retaining business (including but not limited to any contracts, avoidance
of duties or reduction of tariffs, reduction of taxes or to obtain money owed, or to obtain
regulatory approval) or for the purpose of causing, soliciting or inducing the sale and purchase
of the Deliverables by any party, and (iv) it has full knowledge of and will comply with the
Company’s Code of Conduct for Business Partners as set forth on the ALLEGION customer
website, WHICH IS HEREBY INCORPORATED BY REFERENCE.
c. The Customer shall indemnify and hold the Company harmless from any claim, demand,
expense or cost arising from any breach of this Article.
d. The Customer shall permit the Company to conduct an audit or review of the
Customer’s financial books and records and business operations at such other times that the
Company considers it necessary to confirm compliance with this provision. Such audit may
be conducted by representatives of the Company or, at the Company’s sole discretion, by a
certified public accounting firm selected by the Company. The Customer shall cooperate with
any inquiries from the Company’s Ethics & Compliance Group.
e. A violation of this provision constitutes a material breach of this Agreement and the
Company may terminate this Agreement immediately, with no opportunity to cure, in
accordance with Section 26 of this Agreement.
f. Notwithstanding the foregoing provisions of this Section 32, (i) Company is not
responsible for obtaining or maintaining any permits for the performance of services or the
verification or compliance with any code requirements relative to the performance of services,
(ii) to the extent any sale of Deliverables pursuant to this Agreement may require approval
of the Canadian Government, Company’s obligations under this Agreement are conditioned
upon the grant of such approval and upon compliance by Customer with any restrictions
imposed by the Canadian Government in connection with such approval, and (iii) in the event
the Deliverables are to be used in a nuclear facility, the Customer shall, prior to such use,
arrange for insurance or governmental indemnity protecting Company against liability. The
Customer hereby releases and agrees to indemnify Company and its suppliers for any nuclear
damage including, but not limited to, loss of use, in any manner arising out of the nuclear
incident, whether alleged to be due, in whole or in part by Company or its suppliers.
g. No Inducements. Each party represents to each other that neither it nor any person
acting on its behalf has, in contravention of any applicable law, given or offered to give or
will give or offer to give, any sum of money or other material consideration to any person,
directly or indirectly, as an inducement to obtain business hereunder or to influence the
granting of licenses or other governmental permissions to enter into this Agreement or
perform obligations hereunder. Ethical Business Conduct. Customer shall adopt and comply
with Company’s Business Partner Code of Conduct which is EXPRESSLY INCORPORATED
HEREIN BY REFERENCE.
33. REPRESENTATIONS AND WARRANTIES. Customer represents, warrants and
covenants to Company that: (a) it has the right, power, and authority to enter into this
Agreement and fully perform its obligations hereunder; (b) it has all necessary rights in and
to its respective Content and Marks for use within the scope of this Agreement, including
the licenses granted herein; and (c) it complies, and at all times shall comply, with all laws,
rules, and regulations in effect that are applicable to its performance under this Agreement,
including obtaining all such approvals and/or permits as may be required hereunder.
34. NO THIRD-PARTY BENEFICIARY. Each party is entering into this Agreement solely
based on the representations contained herein for its own purposes and not for the benefit of
any third party.
35. NOTICES AND CHANGE OF ADDRESS. All notices or other communications under
this Agreement shall be in writing and delivered in person, or sent by receipted courier,
express mail, e-mail, or postage prepaid certified or registered mail, addressed to the party
for whom it is intended, at the addresses set forth in this Agreement. Either party may
change its address for notice by giving written notice to the other party. Any notice or other
communication shall be deemed given no later than the date actually received. Notice by
courier, express mail, certified mail, or registered mail shall be deemed given on the date it
is officially recorded as delivered and, in the absence of such record of delivery, it shall be
rebuttably presumed to have been delivered on the third Business Day after it was deposited.
Notices sent by e-mail require tangible confirmation of receipt from addressee.
36. ASSIGNMENT. Customer may not assign this Agreement without the prior written
consent of Company. Company may assign its rights and delegate its duties under this
Agreement, without the prior consent of Customer, to an Affiliate, or to a third party in the
event of a spin-off, merger, business combination, consolidation or sale of all, or substantially
all, of its assets or business that are related to this Agreement. The rights and duties in this
Agreement shall bind and inure to the benefit of any such assignee.
37. SEVERABILITY. If any provision of this Agreement is held to be invalid, illegal, or
unenforceable under any statute, regulation, ordinance, executive order, or other rule of law,
that provision will be deemed severed to the extent necessary to comply with such statute,
regulation, ordinance, order, or rule. In the event such provision is deemed severed, the parties
will negotiate in good faith to arrive at an alternative arrangement approximating the original
business objective of the parties. The remaining terms and conditions of this Agreement will
Price Book 2
Effective February 1, 2016 • Rev. 5/16
remain in effect.
38. NO IMPLIED WAIVER. The failure of either party at any time to require performance by
the other party of any provision of this Agreement will in no way affect the right to require
such performance at any time thereafter, nor will the waiver of either party of a breach of any
provision of this Agreement constitute a waiver of any succeeding breach of the same or any
other provision.
39. MISCELLANEOUS. (a) This Agreement does not make either party the agent or legal
representative of the other party. Neither party is authorized to create any obligation on
behalf of the other party including, but not limited to, the obligation for payment of any
service or warranty obligation hereunder; (b) The rights and remedies herein reserved to
Company are cumulative and additional to any other rights and remedies provided at law or
equity; (c) The official text of this Agreement is in the English language. If this Agreement is
translated into another language, the English text will govern any question with respect to
interpretation; (d) The headings in this Agreement are for convenience of reference only and
do not affect the meaning of this Agreement in any manner.
certificates, petty patents and patent utility models).
“Person” means a person or entity.
“Price Books” mean Company’s current Price Book in effect for the applicable Deliverable
being purchased by Customer.
"Trade Secrets" means and includes business or technical information of either party,
including processes, formulas, devices, techniques, compilations and other material that
a party attempts to maintain in secret and that derive commercial value for such party
from not being generally known to the public or readily ascertainable through independent
development or reverse engineering.
DEFINITIONS.
Capitalized terms have the meanings set forth in this Section, or in the Section in which they
first appear in this Agreement.
“Agreement” means these Allegion Terms and Conditions of Sale and Service, together with
any applicable Allegion program agreements or other documents referenced herein or therein.
"Affiliate" means any Person that directly or indirectly, through one or more intermediaries,
controls, is controlled by, or is under common control with, the Company. The term
"control" (including the terms "controlled by" and "under common control with") means
the possession, directly or indirectly, of the power to direct or cause the direction of the
management and policies of a Person, whether through the ownership of voting securities, by
contract or otherwise.
"Business Day" means any day except Saturday, Sunday or any other day on which
commercial banks located in Canada are authorized or required by Law to be closed for
business.
“Company” means Allegion Canada Inc. (also referred to herein as “Allegion” or any
subsidiary or affiliate thereof. Allegion Canada Inc. and/or its subsidiary or affiliates will be
severally but not jointly liable under the Agreement.
“Company Marks” refers to the Marks of Company.
“Confidential Information” shall mean any and all information provided by either party
to the other party pertaining to the disclosing party’s business. Confidential Information
shall include, but not be limited to, any bitting lists, formulae for products, manufacturing
processes, production techniques, packaging processes, methods, research materials,
ideas, marketing plans and related materials, quality standards, test results and data,
apparatus, engineering drawings, contract documents, computer software, hardware,
or firmware, business activities information such as financial information, reports,
projections, books and records, customer and supplier information, and operations,
customer and supplier lists and data, specifications, know how, and other Proprietary
Information or Trade Secrets (as defined herein) that either party may furnish to the other
party. Confidential Information shall not include information that: (a) is or becomes publicly
known if such public knowledge or disclosure is not the result of any act or failure to act
on the part of the receiving party; (b) is, at the time of disclosure, already known to the
Receiving Party without utilizing the Confidential Information; (c) is information disclosed
to the Receiving Party by a third party which is not to the Receiving Party’s knowledge, after
inquiry of the third party, under a duty of confidentiality to the Disclosing Party; or (d) is
independently developed by the Receiving Party without the use of Confidential Information.
The Receiving Party shall have the burden of proof as to prior knowledge and absence
of breach. Confidential Information may be furnished in any tangible or intangible form
including, but not limited to, writings, drawings, computer and other electronic media, logic
diagrams, component specifications, graphs, prototypes, samples, or verbal communications
and regardless of whether such information is marked or designated as “confidential.” For the
avoidance of doubt, all information, knowledge or data disclosed by Company to Customer,
regardless of whether disclosed in written, tangible, oral, visual or other form, including,
without limitation, sample products, equipment, software, or other objects or material,
provided by Company to Customer, and all information, knowledge or data which was
obtained by Customer from visits to Company’s facilities, shall be considered “Confidential
Information” under this Agreement.
“Content” means all information (including without limitation any text, music, sound,
photographs, video, graphics, data or software), in any medium, on a particular Company
Web page or Website or in Marketing Materials.
“Customer” means the purchaser of Deliverables from Company.
“Deliverables” means any good or service or both purchased by Customer from Company
under these General Terms and Conditions of Sale and Service.
“End Users" means the purchaser that (a) has acquired a Deliverable from Customer for (i)
its own and its Affiliate's/Affiliates' internal use and not for resale, remarketing or distribution
or (ii) incorporation into its own products and (b) is an individual or entity, other than any
federal, state or local agency, office or division.
"IP" means all intellectual property and industrial property rights comprising or relating to/
of the following: (a) Patents; (b) Trademarks; (c) internet domain names, whether or not
Trademarks, registered by any authorized private registrar or Governmental Authority, web
addresses, web pages, website and URLs; (d) works of authorship, expressions, designs and
design registrations, whether or not copyrightable, including copyrights and copyrightable
works, software and firmware, application programming interfaces, architecture, files,
records, schematics, data, data files, and databases and other specifications and
documentation; (e) Trade Secrets; and(f) all other intellectual property and industrial
property rights, and all rights, interests and protections that are associated with, equivalent
or similar to, or required for the exercise of, any of the foregoing, however arising, in each
case whether registered or unregistered and including all registrations and applications for,
and renewals or extensions of, such rights or forms of protection pursuant to the Laws of any
jurisdiction throughout in any part of the world.
“Marketing Materials” means all marketing brochures, buckslips, pamphlets, emails, text,
call scripts or other material, whether in printed format, audio or audiovisual format, or in
any other format, that contain any (i) Content relating to the Company Deliverables or (ii)
Company Marks.
“Marks” means collectively the domain names, trademarks, trade names, service marks,
trade dress, logos, and the like used or provided by either party for use in connection with this
Agreement.
"Patents" means all patents (including all reissues, divisionals, provisionals,
continuations and continuations- in-part, re-examinations, renewals, substitutions
and extensions thereof), patent applications, and other patent rights and any other
Governmental Authority-issued indicia of invention ownership (including inventor's
Price Book 2
Effective February 1, 2016 • Rev. 5/16
7
Overhead Holders & Stops
Function & Option Guide
Series 70, 79, 81, 90, 100, 410 & 450
Available on these series
DesignationDescription
Holder & Stop Functions
70 79
H suffix
HOLD OPEN & STOP — The hold open function may be
turned on or off on all models except the 410’s and 450’s.
The tension on the hold open is adjustable so that one
can adjust the amount of force required to pull the door
out of hold open on all except the 81 Series. All holders
include the STOP function.
3 3 3 3
3
3
3
3
3 3
81
F suffixFRICTION HOLD OPEN — Multi-point hold open
mechanism. Tension on hold open is adjustable.
90
100 410 450
HP suffixINTERNAL HOLD OPEN & STOP — The hold open
mechanism is contained completely within the channel.
The hold open is automatic and is not field selectable or
adjustable.
3
3
Stop Only Functions
S suffix
STOP-ONLY — A shock-absorbing spring stops the door.
3 3 3 3
SE suffixSTOP-ONLY with Single Point Hold-Open ELECTRONIC
Closer — The shock-absorbing spring ground in the
standard Stop-Only holders is replaced by an
adjustable fixed stop block.
3
3
3
3
3 3
3
Options
ADJ suffix
ADJUSTABLE JAMB BRACKET — This option provides
for manual setting of the degree of opening, from 85 to
110 degrees. The standard jamb bracket is replaced by a
12˝ track.
3
CJ suffixCLOSER JAMB BRACKET — For use with LCN 5030
Closers. Specify Handing (LH or RH).
J suffix
ANGLE JAMB BRACKET — An angle jamb bracket is
provided to convert standard unit to hinge side or flush
transom mounting.
3 3 3
3
3
3
Door Thickness
Surface Overheads are furnished for standard 1-3/4˝ thick doors.
For doors over 1-3/4˝ up to 2-1/4˝, please specify when ordering - no additional charge.
Other thicknesses available, please specify when ordering - additional charge.
Overhead Holders and Stops – How to Order
Example:
70
2
H - US26D- J
Overhead series (70, 79, 81, 90, 10, 41, 45)
Size (1, 2, 3, 4, 5, or 6)*
Function (H, F, HP, S or SE) For description of functions, refer to chart above.*
Finish (US3, US4, US10, US10B, US26, US26D, US32, US32D, 652, SP4, SP10,
SP28, SP313, SPBLK)
Option (ADJ, CJ, J, SHIM, SNB, SOC)*
*Please refer to individual Overhead Series price book pages for availability of finish, size, function and options.
Prices subject to change without notice.
8
Price Book 2
Effective February 1, 2016 • Rev. 5/16
Overhead Holders & Stops
70 Series Heavy-Duty
79 Series Extra Heavy-Duty
Surface Overhead Holders & Stops
Item*
Description
702H
703H
704H
705H
706H
702S
703S
704S
705S
706S
792H
793H
794H
795H
796H
792S
793S
794S
795S
796S
70 Series, Size 2, Hold-Open
70 Series, Size 3, Hold-Open
70 Series, Size 4, Hold-Open
70 Series, Size 5, Hold-Open
70 Series, Size 6, Hold-Open
70 Series, Size 2, Stop-Only
70 Series, Size 3, Stop-Only
70 Series, Size 4, Stop-Only
70 Series, Size 5, Stop-Only
70 Series, Size 6, Stop-Only
79 Series, Size 2, Hold-Open
79 Series, Size 3, Hold-Open
79 Series, Size 4, Hold-Open
79 Series, Size 5, Hold-Open
79 Series, Size 6, Hold-Open
79 Series, Size 2, Stop-Only
79 Series, Size 3, Stop-Only
79 Series, Size 4, Stop-Only
79 Series, Size 5, Stop-Only
79 Series, Size 6, Stop-Only
US10,
US26D
US3, US4,
US10B,
US26
SP28,
SP4, SP10,
SP313,
SPBLK
$241
241
241
241
241
241
241
241
241
241
673
673
673
673
673
673
673
673
673
673
$255
255
255
255
255
255
255
255
255
255
680
680
680
680
680
680
680
680
680
680
$227
227
227
227
227
227
227
227
227
227
501
501
501
501
501
501
501
501
501
501
*For help in determining the size, please see chart below.
List Add
Options and Accessories
Item
Description
J suffix (70 series)*
J suffix (79 series)*
SNB-1 suffix (70)
SNB-2 suffix (70)
SNB-1 suffix (79)
SNB-2 suffix (79)
SOC suffix (70)
SOC suffix (79)
Angle Jamb Bracket
Angle Jamb Bracket
Sex bolt (set) --- Doors up to 2˝ thick
Sex bolt (set) --- Doors up to 3˝ thick
Sex bolt (set) --- Doors up to 2˝ thick
Sex bolt (set) --- Doors up to 3˝ thick
Pin-in-Socket Security Screws
Pin-in-Socket Security Screws
AJK 70*
70 Series Angle Jamb Bracket Kit
AJK 79*
79 Series Angle Jamb Bracket Kit
For Door thicknesses Over 3"
US3, US4,
US10B,
US26
SP28,
SP4, SP10,
SP313,
SPBLK
US32D
US10,
US26D
$29
27
$49
111
30
37
60
69
-
$49
111
30
37
60
69
-
$49
111
30
37
60
69
-
-
62
139
80
62
139
80
62
139
80
* Note: Angle Jamb Brackets affix to Standard Jamb Brackets to allow for flush transom.
Conversion Kits are sold separately in the Parts Price List.
Optional Finishes – RAL Powder-Coat Finish (For information on available colors, consult factory)
Item
Description
1 - 10 Units
11 - 25 Units
26 or more Units
List Add to Stainless Steel (US32D) price
List Add to Stainless Steel (US32D) price
List Add to Stainless Steel (US32D) price
List Add
$86
60
43
70 & 79 Series Sizing Chart – This chart illustrates the most common types of hinging & door opening sizes. For unusual door or hinge details,
consult Glynn-Johnson’s Technical Support.
Opening size with doors hung with:
Series & Size
Butts / Offset Pivots
Center Pivots
702 & 792
703 & 793
704 & 794
705 & 795
706 & 796
23-1/16˝-27˝
27-1/16˝-33˝
33-1/16˝-39˝
39-1/16˝-45˝
45-1/16˝-54˝
27-1/16˝-33˝
33-1/16˝-39˝
39-1/16˝-45˝
45-1/16˝-51˝
51-1/16˝-59˝
Prices subject to change without notice.
Price Book 2
Effective February 1, 2016 • Rev. 5/16
9
Overhead Holders & Stops
81 Series Heavy-Duty Surface
Overhead Holders & Stops
(Formerly 80 Series)
Item*
Description
US32D
US4, US10,
US10B
US3,
US32
652
813H
814H
815H
816H
813S
814S
815S
816S
81 Series, Size 3, Hold-Open
81 Series, Size 4, Hold-Open
81 Series, Size 5, Hold-Open
81 Series, Size 6, Hold-Open
81 Series, Size 3, Stop-Only
81 Series, Size 4, Stop-Only
81 Series, Size 5, Stop-Only
81 Series, Size 6, Stop-Only
$367
367
367
367
320
320
320
320
$418
418
418
418
368
368
368
368
$437
437
437
437
387
387
387
387
$310
310
310
310
268
268
268
268
* For help in determining size, please see chart below.
Options and Accessories
List Add
All Finishes
Item*
Description
J suffix
SHIM-1 suffix
SHIM-2 suffix
SHIM-3 suffix
SOC suffix
Angle Jamb Bracket
1/4˝ Shim for Blade Stop Mounting
1/2˝ Shim for Blade Stop Mounting
3/4˝ Shim for Blade Stop Mounting
Pin-in-Socket Security Screws
$40
21
28
42
23
AJK 81*
SHK 81-1
SHK 81-2
SHK 81-3
For Door Thickness over 2 1/4˝
Angle Jamb Bracket Kit
1/4˝ Shim Kit for Blade Stop Mounting
1/2˝ Shim Kit for Blade Stop Mounting
3/4˝ Shim Kit for Blade Stop Mounting
49
21
28
42
74
*Note: Angle Jamb Brackets affix to Standard Jamb Brackets to allow for flush transom or hinge side mounting (stop-only models).
Conversion Kits are sold separately in the Parts Price List.
81 Series Sizing Chart – This chart illustrates the most common types of hinging & door opening sizes. For unusual door or hinge details,
consult Glynn-Johnson’s Technical Support.
Opening size with doors hung with:
Series & Size
Butts / Offset Pivots
Center Pivots
813
814
815
816
27-1/16"-33"
33-1/16"-39"
39-1/16"-45"
45-1/16"-54"
33-1/16"-39"
39-1/16"-45"
45-1/16"-51"
51-1/16"-59"
Prices subject to change without notice.
10
Price Book 2
Effective February 1, 2016 • Rev. 5/16
Overhead Holders & Stops
90 Series Heavy-Duty Surface
Overhead Holders & Stops
Item*
Description
US32D
US4,
US10
US3,
US32
US10B
652
SP28,
SP4,
SP10,
SP313,
SPBLK
902H
903H
904H
905H
906H
902S
903S
904S
905S
906S
902F
903F
904F
905F
906F
90 Series, Size 2, Hold-Open
90 Series, Size 3, Hold-Open
90 Series, Size 4, Hold-Open
90 Series, Size 5, Hold-Open
90 Series, Size 6, Hold-Open
90 Series, Size 2, Stop-Only
90 Series, Size 3, Stop-Only
90 Series, Size 4, Stop-Only
90 Series, Size 5, Stop-Only
90 Series, Size 6, Stop-Only
90 Series, Size 2, Friction Hold-Open
90 Series, Size 3, Friction Hold-Open
90 Series, Size 4, Friction Hold-Open
90 Series, Size 5, Friction Hold-Open
90 Series, Size 6, Friction Hold-Open
$360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
$381
381
381
381
381
381
381
381
381
381
381
381
381
381
381
$419
419
419
419
419
419
419
419
419
419
419
419
419
419
419
$401
401
401
401
401
401
401
401
401
401
401
401
401
401
401
$264
264
264
264
264
264
264
264
264
264
264
264
264
264
264
$224
224
224
224
224
224
224
224
224
224
224
224
224
224
224
* For help in determining size, please see chart below.
Options and Accessories
List Add
All Finishes
Item*
Description
SE suffix
J suffix*
SHIM-1 suffix
SHIM-2 suffix
SHIM-3 suffix
SOC suffix
Stop-Only function for use with Single Point Hold-Open Electronic Closers
Angle Jamb Bracket
1/4˝ Shim for Blade Stop Mounting
1/2˝ Shim for Blade Stop Mounting
3/4˝ Shim for Blade Stop Mounting
Pin-in-Socket Security Screws
AJK90*
Angle Jamb Bracket Kit
SHK 90-1
1/4˝ Shim Kit for Blade Stop Mounting
SHK 90-2
1/2˝ Shim Kit for Blade Stop Mounting
SHK 90-3
3/4˝ Shim Kit for Blade Stop Mounting
For Door thickness over 2 1/4˝
*Note: Angle Jamb Brackets affix to Standard Jamb Brackets to allow for flush transom or hinge side mounting.
Conversion Kits are sold separately in the Parts Price List.
$41
40
26
34
52
23
49
26
34
52
78
Optional Finishes – RAL Powder-Coat Finish (For information on available colors, consult factory)
Item
Description
1 - 10 Units
11 - 25 Units
26 or more Units
List Add to Stainless Steel (US32D) price
List Add to Stainless Steel (US32D) price
List Add to Stainless Steel (US32D) price
List Add
$86
60
43
90 Series Sizing Chart – This chart illustrates the most common types of hinging & door opening sizes. For unusual door or hinge details, consult
Glynn-Johnson’s Technical Support.
Opening size with doors hung with:
Series & Size
Butts / Offset Pivots
Center Pivots
902
903
904
905
906
23-1/16"-27"
27-1/16"-33"
33-1/16"-39"
39-1/16"-45"
45-1/16"-54"
27-1/16"-33"
33-1/16"-39"
39-1/16"-45"
45-1/16"-51"
51-1/16"-59"
Prices subject to change without notice.
Price Book 2
Effective February 1, 2016 • Rev. 5/16
11
Overhead Holders & Stops
100 Series Heavy-Duty Surface
Concealed Overhead Holders & Stops
Item*
Description
US32D
US10
US4,
US10B
US3,
US32
SP28,
SP4,
SP10,
SP313,
SPBLK
101H, 102H
103H, 104H
105H, 106H
101S, 102S
103S, 104S
105S, 106S
101F, 102F
103F, 104F
105F, 106F
101HP, 102HP
103HP, 104HP
105HP, 106HP
100 Series, Size 1 or 2, Hold-Open
100 Series, Size 3 or 4, Hold-Open
100 Series, Size 5 or 6, Hold-Open
100 Series, Size 1 or 2, Stop-Only
100 Series, Size 3 or 4, Stop-Only
100 Series, Size 5 or 6, Stop-Only
100 Series, Size 1 or 2, Friction Hold-Open
100 Series, Size 3 or 4, Friction Hold-Open
100 Series, Size 5 or 6, Friction Hold-Open
100 Series, Size 1 or 2, Internal Hold-Open
100 Series, Size 3 or 4, Internal Hold-Open
100 Series, Size 5 or 6, Internal Hold-Open
$347
347
347
347
347
347
347
347
347
347
347
347
$366
366
366
366
366
366
366
366
366
366
366
366
$370
370
370
370
370
370
370
370
370
370
370
370
$391
391
391
391
391
391
391
391
391
391
391
391
$346
346
346
346
346
346
346
346
346
346
346
346
* For help in determining size, please see chart below.
List Add
US32D
US10
US4,
US10B
US3,
US32
SP28,
SP4,
SP10,
SP313,
SPBLK
Stop-Only function for use with Single Point HoldOpen Electronic Closers.
$24
$24
$24
$24
$24
Adjustable Jamb Bracket Available on models
103-106 (Allows for field adjustment of Hold-Open
85-110 degrees)
56
56
56
56
56
45
45
45
45
45
10
10
10
10
10
10
10
10
10
10
Options and Accessories
Item
Description
SE suffix
ADJ suffix
CJ suffix
SOC suffix
SOC suffix (ADJ)
Special Jamb Bracket for use with LCN 5030
Closers. Specify Handing.
Pin-in-Socket Security Screws
Pin-in-Socket Security Screws
Conversion Kits sold separately See Parts section.
Optional Finishes – RAL Powder-Coat Finish (For information on available colors, consult factory).
Item
Description
1 - 10 Units
11 - 25 Units
26 or more Units
List Add to Stainless Steel (US32D) price
List Add to Stainless Steel (US32D) price
List Add to Stainless Steel (US32D) price
List Add
$88
60
43
100 Series Sizing Chart – This chart illustrates the most common types of hinging & door opening sizes. For unusual door or hinge details, consult
Glynn-Johnson’s Technical Support.
Opening size with doors hung with:
Series & Size
Butts / Offset Pivots
Center Pivots
101
102
103
104
105
106
18"-23"
23-1/16"-27"
27-1/16"-33"
33-1/16"-39"
39-1/16"-45"
45-1/16"-54"
Not Available
Not Available
33-1/16"-39"
39-1/16"-45"
45-1/16"-51"
51-1/16"-59"
Prices subject to change without notice.
12
Price Book 2
Effective February 1, 2016 • Rev. 5/16
Overhead Holders & Stops
410 Series Medium-Duty Concealed
Overhead Holders & Stops
Item*
Description
US32D
US4,
US10
US3,
US32
US10B
652
SP28,
SP4,
SP10,
SP313,
SPBLK
411H
412H
413H
414H
415H
411S
412S
413S
414S
415S
411F
412F
413F
414F
415F
410 Series, Size 1, Hold-Open
410 Series, Size 2, Hold-Open
410 Series, Size 3, Hold-Open
410 Series, Size 4, Hold-Open
410 Series, Size 5, Hold-Open
410 Series, Size 1, Stop-Only
410 Series, Size 2, Stop-Only
410 Series, Size 3, Stop-Only
410 Series, Size 4, Stop-Only
410 Series, Size 5, Stop-Only
410 Series, Size 1, Friction Hold-Open
410 Series, Size 2, Friction Hold-Open
410 Series, Size 3, Friction Hold-Open
410 Series, Size 4, Friction Hold-Open
410 Series, Size 5, Friction Hold-Open
$130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
$145
145
145
145
145
145
145
145
145
145
145
145
145
145
145
$155
155
155
155
155
155
155
155
155
155
155
155
155
155
155
$146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
$111
111
111
111
111
111
111
111
111
111
111
111
111
111
111
$101
101
101
101
101
101
101
101
101
101
101
101
101
101
101
* For help in determining size, please see chart below.
Options and Accessories
List Add
All Finishes
Item
Description
SE suffix
SOC suffix
Stop-Only function for use with Single Point Hold-Open Electronic Closers
Pin-in-Socket Security Screws
$20
15
Conversion Kits sold separately See Parts section.
Optional Finishes – RAL Powder-Coat Finish (For information on available colors, consult factory)
Item
Description
1 - 10 Units
11 - 25 Units
26 or more Units
List Add to Stainless Steel (US32D) price
List Add to Stainless Steel (US32D) price
List Add to Stainless Steel (US32D) price
List Add
$86
60
43
410 Series Sizing Chart – This chart illustrates the most common types of hinging & door opening sizes. For unusual door or hinge details, consult
Glynn-Johnson’s Technical Support.
Series & Size
Butts / Offset Pivots
Center Pivots
411
412
413
414
415
18"-23"
23-1/16"-27"
27-1/16"-33"
33-1/16"-39"
39-1/16"-45"
Not Available
Not Available
33-1/16"-39"
39-1/16"-45"
45-1/16"-51"
Prices subject to change without notice.
Price Book 2
Effective February 1, 2016 • Rev. 5/16
13
Overhead Holders & Stops
450 Series Medium-Duty Surface
Overhead Holders & Stops
Item*
Description
US32D
US4,
US10
US3,
US32
US10B
652
SP28,
SP4,
SP10,
SP313,
SPBLK
451H
452H
453H
454H
455H
451S
452S
453S
454S
455S
451F
452F
453F
454F
455F
450 Series, Size 1, Hold-Open
450 Series, Size 2, Hold-Open
450 Series, Size 3, Hold-Open
450 Series, Size 4, Hold-Open
450 Series, Size 5, Hold-Open
450 Series, Size 1, Stop-Only
450 Series, Size 2, Stop-Only
450 Series, Size 3, Stop-Only
450 Series, Size 4, Stop-Only
450 Series, Size 5, Stop-Only
450 Series, Size 1, Friction Hold-Open
450 Series, Size 2, Friction Hold-Open
450 Series, Size 3, Friction Hold-Open
450 Series, Size 4, Friction Hold-Open
450 Series, Size 5, Friction Hold-Open
$161
161
161
161
161
161
161
161
161
161
161
161
161
161
161
$172
172
172
172
172
172
172
172
172
172
172
172
172
172
172
$196
196
196
196
196
196
196
196
196
196
196
196
196
196
196
$178
178
178
178
178
178
178
178
178
178
178
178
178
178
178
$122
122
122
122
122
122
122
122
122
122
122
122
122
122
122
$106
106
106
106
106
106
106
106
106
106
106
106
106
106
106
* For help in determining size, please see chart below.
Options and Accessories
List Add
All Finishes
Item
Description
SE suffix
J suffix*
SHIM-1 suffix
SHIM-2 suffix
SHIM-3 suffix
SOC suffix
1-3/8˝ Dr Thickness
2-1/4˝ Dr Thickness
For Door Thickness over 2 1/4"
Stop-Only function for use with Single Point Hold-Open Electronic Closers
Angle Jamb Bracket
3/16˝ Shim Kit for Blade Stop Mounting
3/8˝ Shim Kit for Blade Stop Mounting
9/16˝ Shim Kit for Blade Stop Mounting
Pin-in-Socket Security Screws
Mounting Package for 1-3/8˝ Door
Mounting Package for up to 2-1/4˝ Door
$20
35
15
25
32
23
34
20
80
AJK 450*
SHK 450-1
SHK 450-2
SHK 450-3
450 Series Angle Jamb Bracket Kit
3/16˝ Shim Kit for Blade Stop Mounting
3/8˝ Shim Kit for Blade Stop Mounting
9/16˝ Shim Kit for Blade Stop Mounting
44
15
25
32
*Note: Angle Jamb Brackets affix to Standard Jamb Brackets to allow for flush transom or hinge side mounting.
Conversion Kits sold separately See Parts section.
Optional Finishes – RAL Powder-Coat Finish (For information on available colors, consult factory)
Item
Description
List Add
1 - 10 Units
11 - 25 Units
26 or more Units
List Add to Stainless Steel (US32D) price
List Add to Stainless Steel (US32D) price
List Add to Stainless Steel (US32D) price
$86
60
43
450 Series Sizing Chart – This chart illustrates the most common types of hinging & door opening sizes. For unusual door or hinge details, consult
Glynn-Johnson’s Technical Support.
Series & Size
Butts / Offset Pivots
Center Pivots
451
452
453
454
455
18˝-23˝
23-1/16˝-27˝
27-1/16˝-33˝
33-1/16˝-39˝
39-1/16˝-45˝
23-1/16˝-27˝
27-1/16˝-33˝
33-1/16˝-39˝
39-1/16˝-45˝
45-1/16˝-51˝
Prices subject to change without notice.
14
Price Book 2
Effective February 1, 2016 • Rev. 5/16
Sensaguard
280 Series Sensaguard
Stand Alone Holder/Release Smoke Detector Item
Description
US28
313AN
280
Sensaguard Stand Alone Holder/Release Smoke Detector
$918 $954 • Battery Operated Hold-Open/Release
• Built-in Smoke Detector
• Non-Handed -- Mounts on Push or Pull Side of Door
• Fits Doors 30˝ and Larger
Options
Item
SOC suffix
Description
Pin-in-Socket Security Screws
All Finishes
$22
Prices subject to change without notice.
Price Book 2
Effective February 1, 2016 • Rev. 5/16
15
Push/Pull Latches
HL6 Push/Pull Latch and
PL7 and PL8 Privacy Function Push/Pull Latch
Item*
Description
US26D
US32D
US26
US32
US4,
US10
US3,
US10B
HL6-2
HL6-3
HL6-5
PL7-2
PL7-3
PL7-5
PL8-2
PL8-3
PL8-5
Push/Pull Latch - 2-3/4˝ Backset
Push/Pull Latch - 3-3/4˝ Backset
Push/Pull Latch - 5˝ Backset
Push Side Thumbturn - 2-3/4˝ Backset
Push Side Thumbturn - 3-3/4˝ Backset
Push Side Thumbturn - 5˝ Backset
Pull Side Thumbturn - 2-3/4˝ Backset
Pull Side Thumbturn - 3-3/4˝ Backset
Pull Side Thumbturn - 5˝ Backset
$308
308
308
401
401
401
401
401
401
$356
356
356
459
459
459
459
459
459
$382
382
382
481
481
481
481
481
481
$378
378
378
490
490
490
490
490
490
$365
365
365
473
473
473
473
473
473
$390
390
390
492
492
492
492
492
492
Options
Item
Description
List Add
7" suffix
7" Backset
A suffix
ASA Strike, ANSI 115.1 (1-1/4" x 4-7/8"), when ordered with latch
AS suffix
Both Standard & ASA Strikes
B suffix
Brass base material on US26D (AM not available)
E suffix
Engraved Push and Pull. (See page 18 for ordering guide)
EN suffix
Pull Only Latch
EO suffix
Push Only Latch
L suffix
Lead Lining
RL suffix
Roller Latch Conversion
SOC suffix
Pin-in-Socket Security Screws
Standard HL6 with Door Thickness over 1 3/4" (Without Special Strike)
PL7 or PL8 with Door Thickness over 1 3/4"
46
N/C
27
50
50
List Deduct 60
List Deduct 60
92
44
27
79
N/A
Optional Finishes – RAL Powder-Coat Finish (For information on available colors, consult factory).
Item
Description
List Add
1 - 10 Units
11 - 25 Units
26 or more Units
List Add to Stainless Steel (US32D) price
List Add to Stainless Steel (US32D) price
List Add to Stainless Steel (US32D) price
$83
60
42
Anti-Microbial Coating is available for the HL and PL Series in US26D and US32D finishes.
Specify US26D-AM or US32D-AM when ordering.
27
Push/Pull Latches - How to Order
Example: HL6
E
4
- US26D -
2
-
-
Model (HL6, PL7, PL8)
Option, if applicable (B, E, EN, EO, L, RL, SOC)
Engraving style, if applicable, see page 18. (1, 2, 3, 4, 5, 6)
Finish (US3, US4, US10, US10B, US26, US26D, US32, US32D)
Backset (2=2-3/4˝, 3=3-3/4˝, 5=5˝, 7=7˝)
Strike (Blank for standard, A for ASA, AS for both strikes)
Door Thickness (Blank for 1-3/4˝ door, specify other thickness)
Prices subject to change without notice.
16
Price Book 2
Effective February 1, 2016 • Rev. 5/16
Push/Pull Latches
Push/Pull Mortise Lock Combination
• Schlage L-Series Lock Included.
• Cylinders are not included and are not available through Glynn-Johnson
• On functions with cylinders, handles must be mounted in down position on key side or horizontally on both sides.
• On functions with thumbturns, handles must be mounted in the horizontal position.
• All units 2-3/4˝ backset
• ASA strike furnished with all units.
Model*
Description
US26D
US26,
US10B, US3
US4, US10
US32D
HL6-9010
HL6-9040*
HL6-9050*
HL6-9060
HL6-9070
HL6-9080
HL6-9082
HL6-9092EL/EU
HL6-9095EL/EU
HL6-9453*
HL6-9456*
HL6-9465
HL6-9466
HL6-9473*
HL6-9485*
HL6-9486*
HL6-9000RK
Passage Function
Privacy Function
Office/Inner Entry Function
Apartment Entrance Function
Classroom Function
Storeroom Function
Institution Function
Storeroom Function w/ Electric Locking or Unlocking
Institution Function w/ Electric Locking or Unlocking
Entrance Function
Dormitory Exit Function
Closet/Storeroom Function
Store/Utility Function
Dorm Bedroom Function
Hotel Lock Function
Hotel Lock Function
Less Mortise Lock
$851
889
889
851
851
851
851
1452
1521
889
889
889
889
889
889
889
365
$889
929
929
889
889
889
889
1490
1559
929
929
929
929
929
929
929
400
$889
929
929
889
889
889
889
1490
1559
929
929
929
929
929
929
929
400
$889
929
929
889
889
889
889
1490
1559
929
929
929
929
929
929
929
400
Note: Must specify when using with 9095EL/EU solid spindle.
*Thumbturn functions
Options
Item
Description
L suffix
E suffix
B suffix
SOC suffix
EO suffix
EN suffix
BT suffix
RX suffix
Lead Lining
Engraved Push and Pull. (See page 18 for ordering guide)
Brass base material on US26D
Pin-in-Socket Security Screws
Push Side Only Latch
Pull Side Only Latch
Bent Tab for Mortise Lock Strike
9092EL/EU or 9095EL/EU
List Add
$256
50
50
27
List Deduct 140
List Deduct 140
58
254
Optional Finishes – RAL Powder-Coat Finish (For information on available colors, consult factory)
Item
Description
List Add
1 - 10 Units
List Add to Stainless Steel (US32D) price
11 - 25 Units
List Add to Stainless Steel (US32D) price
26 or more Units
List Add to Stainless Steel (US32D) price
Anti-Microbial Coating is available for the HL and PL-series in US26D and US32D finishes.
Specify US26D-AM or US32D-AM when ordering.
$86
60
43
27
Push/Pull Latches - How to Order
Example: HL6
E
2
- 9070
- US26D
Model (HL6)
Option, if applicable (B, BT, E, EN, EO, L, RX, SOC)
Engraving style, if applicable, see page 18. (1, 2, 3, 4, 5, 6)
Lock Function (Functions listed above or 9000RK for conversion kit)
Finish (US3, US4, US10, US10B, US26, US26D, US32D)
Door Thickness (Blank for 1-3/4˝ door, specify other thickness)
Prices subject to change without notice.
Price Book 2
Effective February 1, 2016 • Rev. 5/16
17
Push/Pull Latches
Engraving Guide
Mounting Position
To Order, Specify
P
P
PPPUP
U
UUUSU
S
HS
SSS
PP
H
HHH
UUH
SS
HH
Push Up, Pull Down
E1
P
P
Any
backset
P
•
PP UP
U
UU L
• Non-handed
LLUL LU
PL
LLLP
L
• No PL7 or PL8
LUUL
L
L
LL
P
P
P
P
PPPUP
PPPUP
Push Up, Pull Up
E2
U
U
UU L
UUUSU
LLUL LU
S
Any
Backset
P
P
H
SSS
PPS
•
LLLL L
H
HHH
UUH
LUUL
• Non-handed
L
L
SS
LL
HH
Horizontal EngravingE3
• Any Backset
PULL
PUSH
PULL
PUSH
PULL
• RH
PUSH
PULL
PUSH
PULL
PULL
PUSH
PUSH
• No PL7 or PL8
PULL
PULL
PUSH
PUSH
PUSH
PULL
PUSH
PULL
PUSH
PULL
PUSH
PULL
Horizontal EngravingE4
PUSH
PULL
PUSH
PULL
• Any Backset
PUSH
PULL
PUSH
PULL
• LH
• No PL7 or PL8
P
P
PPPUP
U
U
U L
LLUL LU
P
P
LP
L
LUL
P
Push Down, Pull Up
LLU
PPPUP
L
U
LL
UUUSU
Any Backset
S
SP
LL
H
SSP
H
HUS
Non-Handed
HHU
H
SS
No PL7 or PL8
HH
•
•
•
E5
Push Down, Pull Down
E6
P
P
Any
Backset
P
P
•
PPPUP
PPPUP
U
U
UUUSU
UUU LU
• Non-handed
S
LLL L
HS
SSS
PL
PP
LP
H
L
H
L
HHUUH
LLUUL
SS
LL
HH
LL
Horizontal EngravingE4
• 7˝ Backset only
PUSH
PULL
• RH
PUSH
PULL
PUSH
PULL
PUSH
PULL
PUSH
PULL
PUSH
PULL
• No Mortise Lock
PUSH
PULL
PUSH
PULL
• No PL7 or PL8
PULL
PUSH
PULL
PUSH
PULL
PUSH
PULL
PUSH
PULL
PUSH
PULL
PUSH
Horizontal EngravingE3
PULL
PUSH
PULL
PUSH
• 7˝ Backset only
• LH
• No Mortise Lock
• No PL7 or PL8
Prices subject to change without notice.
18
Price Book 2
Effective February 1, 2016 • Rev. 5/16
Parts
HOW TO USE THIS PARTS PRICE LIST
To find a part number and its list price:
nFirst, start with the product where the part is used.
nNext, scan the descriptions shown below the product.
n
nFrom there, note the part number to use when ordering. If directed, refer to the HOW TO ORDER guide used
Once you find the description, determine the finish, if applicable.
to order most arm assemblies, channel assemblies, and handle assemblies.
If you are unable to find a part, or if you already know the part number but do not know where it is being used and
you need its list price, please contact Glynn-Johnson Customer Service using the information provided on the inside
front cover.
Prices subject to change without notice.
Price Book 2
Effective February 1, 2016 • Rev. 5/16
19
70 Series
70 Series
Description
70 Door Bracket & Pin
70 Door Bracket & Pin
70 Door Bracket & Pin
70 Door Bracket & Pin
70 Door Bracket & Pin
70 Door Bracket & Pin
70 Door Bracket & Pin
70 Door Bracket & Pin
70 Door Bracket & Pin
70 Door Bracket & Pin
70 Door Bracket & Pin
70 Jamb Bracket
70 Jamb Bracket
70 Jamb Bracket
70 Jamb Bracket
70 Jamb Bracket
70 Jamb Bracket
70 Jamb Bracket
70 Jamb Bracket
70 Jamb Bracket
70 Jamb Bracket
70 Jamb Bracket
70 Hook Assembly - Hold Open Conversion
70 Hook Assembly - Hold Open Conversion
70 Hook Assembly - Hold Open Conversion
70 Hook Assembly - Hold Open Conversion
70 Hook Assembly - Hold Open Conversion
70 Hook Assembly - Hold Open Conversion
70 Hook Assembly - Hold Open Conversion
70 Hook Assembly - Hold Open Conversion
70 Hook Assembly - Hold Open Conversion
70 Hook Assembly - Hold Open Conversion
70 Hook Assembly - Hold Open Conversion
70 Stop Washer - Stop Only Conversion
70 Shock Spring
70 Roll Pin (Pkg of 10)
70 Adjustment Nut (Pkg of 10)
70 Mounting Pkg
70 Mounting Pkg
70 Mounting Pkg
70 Mounting Pkg
70 Mounting Pkg
70 Security Mounting Pkg
70 Mounting Pkg - 2 1/4" Door
70 Mounting Pkg - 2 1/4" Door
70 Mounting Pkg - 2 1/4" Door
70 Mounting Pkg - 2 1/4" Door
70 Mounting Pkg - 2 1/4" Door
70/79/81/90 Angle Screw Pkg
70/79/81/90 Angle Screw Pkg
70/79/81/90 Angle Screw Pkg
70/79/81/90 Angle Screw Pkg
70/79/81/90 Angle Screw Pkg
Finish
Part No.
List Price Each
US3
US4
US10
US10B
US26
US26D
SP4
SP10
SP313
SP28
SPBLK
US3
US4
US10
US10B
US26
US26D
SP4
SP10
SP313
SP28
SPBLK
US3
US4
US10
US10B
US26
US26D
SP4
SP10
SP313
SP28
SPBLK
US3,US4,SP4
US10,SP10
US10B,SP313
US26,US26D,SP28
SPBLK
US3,US4,SP4
US10,SP10
US10B,SP313
US26,US26D,SP28
SPBLK
US3,US4,SP4
US10,SP10
US10B,SP313
US26,US26D,SP28
SPBLK
OHPART.10001
OHPART.10002
OHPART.10003
OHPART.10004
OHPART.10005
OHPART.10006
OHPART.10007
OHPART.10008
OHPART.10009
OHPART.10010
OHPART.10011
OHPART.10012
OHPART.10013
OHPART.10014
OHPART.10015
OHPART.10016
OHPART.10017
OHPART.10018
OHPART.10019
OHPART.10020
OHPART.10021
OHPART.10022
OHPART.10023
OHPART.10024
OHPART.10025
OHPART.10026
OHPART.10027
OHPART.10028
OHPART.10029
OHPART.10030
OHPART.10031
OHPART.10032
OHPART.10033
OHPART.10034
OHPART.10035
OHPART.10036
OHPART.10037
OHPART.10038
OHPART.10039
OHPART.10040
OHPART.10041
OHPART.10042
OHPART.10043
OHPART.10044
OHPART.10045
OHPART.10046
OHPART.10047
OHPART.10048
OHPART.10049
OHPART.10050
OHPART.10051
OHPART.10052
OHPART.10053
$67.00
67.00
56.00
67.00
67.00
49.00
33.00
33.00
33.00
33.00
33.00
99.00
99.00
92.00
99.00
99.00
92.00
87.00
87.00
87.00
87.00
87.00
47.00
47.00
47.00
47.00
47.00
47.00
47.00
47.00
47.00
47.00
47.00
9.00
7.00
7.00
9.00
26.00
26.00
26.00
26.00
26.00
29.00
26.00
26.00
26.00
26.00
26.00
9.00
9.00
9.00
9.00
9.00
Prices subject to change without notice.
20
Price Book 2
Effective February 1, 2016 • Rev. 5/16
70 and 79 Series
70 Series (continued)
Description
70 Sex Bolt Pkg, Up to 2" Door (Set of 3)
70 Sex Bolt Pkg, Up to 2" Door (Set of 3)
70 Sex Bolt Pkg, Up to 2" Door (Set of 3)
70 Sex Bolt Pkg, Up to 2" Door (Set of 3)
70 Sex Bolt Pkg, Up to 2" Door (Set of 3)
70 Sex Bolt Pkg, Up to 2" Door (Set of 3)
70 Sex Bolt Pkg, Up to 2" Door (Set of 3)
70 Sex Bolt Pkg, 2" to 3" Door (Set of 3)
70 Sex Bolt Pkg, 2" to 3" Door (Set of 3)
70 Sex Bolt Pkg, 2" to 3" Door (Set of 3)
70 Sex Bolt Pkg, 2" to 3" Door (Set of 3)
70 Sex Bolt Pkg, 2" to 3" Door (Set of 3)
70 Sex Bolt Pkg, 2" to 3" Door (Set of 3)
70 Sex Bolt Pkg, 2" to 3" Door (Set of 3)
Finish
Part No.
List Price Each
US3,US4
US10,SP10
US10B,SP313
US26,US26D
SP4
SP28
SPBLK
US3,US4
US10,SP10
US10B,SP313
US26,US26D
SP4
SP28
SPBLK
OHPART.10054
OHPART.10055
OHPART.10056
OHPART.10057
OHPART.10058
OHPART.10059
OHPART.10060
OHPART.10061
OHPART.10062
OHPART.10063
OHPART.10064
OHPART.10065
OHPART.10066
OHPART.10067
$30.00
30.00
30.00
30.00
30.00
30.00
30.00
38.00
38.00
38.00
38.00
38.00
38.00
38.00
US3
US4
US10
US10B
US26
US26D
SP4
SP10
SP313
SP28
SPBLK
US3
US4
US10
US10B
US26
US26D
SP4
SP10
SP313
SP28
SPBLK
US3
US4
US10
US10B
US26
US26D
SP4
SP10
SP313
SP28
SPBLK
OHPART.10101
OHPART.10102
OHPART.10103
OHPART.10104
OHPART.10105
OHPART.10106
OHPART.10107
OHPART.10108
OHPART.10109
OHPART.10110
OHPART.10111
OHPART.10112
OHPART.10113
OHPART.10114
OHPART.10115
OHPART.10116
OHPART.10117
OHPART.10118
OHPART.10119
OHPART.10120
OHPART.10121
OHPART.10122
OHPART.10123
OHPART.10124
OHPART.10125
OHPART.10126
OHPART.10127
OHPART.10128
OHPART.10129
OHPART.10130
OHPART.10131
OHPART.10132
OHPART.10133
$100.00
100.00
92.00
100.00
100.00
92.00
57.00
57.00
57.00
57.00
57.00
307.00
307.00
229.00
307.00
307.00
229.00
176.00
176.00
176.00
176.00
176.00
82.00
82.00
82.00
82.00
82.00
82.00
82.00
82.00
82.00
82.00
82.00
79 Series
79 Door Bracket & Pin
79 Door Bracket & Pin
79 Door Bracket & Pin
79 Door Bracket & Pin
79 Door Bracket & Pin
79 Door Bracket & Pin
79 Door Bracket & Pin
79 Door Bracket & Pin
79 Door Bracket & Pin
79 Door Bracket & Pin
79 Door Bracket & Pin
79 Jamb Bracket
79 Jamb Bracket
79 Jamb Bracket
79 Jamb Bracket
79 Jamb Bracket
79 Jamb Bracket
79 Jamb Bracket
79 Jamb Bracket
79 Jamb Bracket
79 Jamb Bracket
79 Jamb Bracket
79 Hook Assembly - Hold Open Conversion
79 Hook Assembly - Hold Open Conversion
79 Hook Assembly - Hold Open Conversion
79 Hook Assembly - Hold Open Conversion
79 Hook Assembly - Hold Open Conversion
79 Hook Assembly - Hold Open Conversion
79 Hook Assembly - Hold Open Conversion
79 Hook Assembly - Hold Open Conversion
79 Hook Assembly - Hold Open Conversion
79 Hook Assembly - Hold Open Conversion
79 Hook Assembly - Hold Open Conversion
Prices subject to change without notice.
Price Book 2
Effective February 1, 2016 • Rev. 5/16
21
79, 80 and 81 Series
79 Series (continued)
Description
79 Stop Washer - Stop Only Conversion
79 Shock Spring
79 Roll Pin (Pkg of 10)
79 Adjustment Nut (Pkg of 10)
79 Mounting Pkg
79 Mounting Pkg
79 Mounting Pkg
79 Mounting Pkg
79 Mounting Pkg
79 Security Mounting Pkg
70/79/81/90 Angle Screw Pkg
70/79/81/90 Angle Screw Pkg
70/79/81/90 Angle Screw Pkg
70/79/81/90 Angle Screw Pkg
70/79/81/90 Angle Screw Pkg
79 Sex Bolt Pkg, Up to 2" Door (Set of 4)
79 Sex Bolt Pkg, Up to 2" Door (Set of 4)
79 Sex Bolt Pkg, Up to 2" Door (Set of 4)
79 Sex Bolt Pkg, Up to 2" Door (Set of 4)
79 Sex Bolt Pkg, Up to 2" Door (Set of 4)
79 Sex Bolt Pkg, Up to 2" Door (Set of 4)
79 Sex Bolt Pkg, Up to 2" Door (Set of 4)
79 Sex Bolt Pkg, 2" to 3" Door (Set of 4)
79 Sex Bolt Pkg, 2" to 3" Door (Set of 4)
79 Sex Bolt Pkg, 2" to 3" Door (Set of 4)
79 Sex Bolt Pkg, 2" to 3" Door (Set of 4)
79 Sex Bolt Pkg, 2" to 3" Door (Set of 4)
79 Sex Bolt Pkg, 2" to 3" Door (Set of 4)
79 Sex Bolt Pkg, 2" to 3" Door (Set of 4)
Finish
Part No.
List Price Each
US3,US4,SP4
US10,SP10
US10B,SP313
US26,US26D,SP28
SPBLK
US3,US4,SP4
US10,SP10
US10B,SP313
US26,US26D,SP28
SPBLK
US3,US4
US10,SP10
US10B,SP313
US26,US26D
SP4
SP28
SPBLK
US3,US4
US10,SP10
US10B,SP313
US26,US26D
SP4
SP28
SPBLK
OHPART.10134
OHPART.10135
OHPART.10136
OHPART.10137
OHPART.10138
OHPART.10139
OHPART.10140
OHPART.10141
OHPART.10142
OHPART.10143
OHPART.10049
OHPART.10050
OHPART.10051
OHPART.10052
OHPART.10053
OHPART.10144
OHPART.10145
OHPART.10146
OHPART.10147
OHPART.10148
OHPART.10149
OHPART.10150
OHPART.10151
OHPART.10152
OHPART.10153
OHPART.10154
OHPART.10155
OHPART.10156
OHPART.10157
$9.00
9.00
9.00
20.00
36.00
36.00
36.00
36.00
36.00
27.00
9.00
9.00
9.00
9.00
9.00
60.00
60.00
60.00
60.00
60.00
60.00
60.00
71.00
71.00
71.00
71.00
71.00
71.00
71.00
US3
US4
US10
US10B
US32
US32D,652
SP4
SP10
SP313
SP28
SPBLK
US3
US4
US10
US10B
US26
US26D,652
SP4
SP10
SP313
SP28
SPBLK
OHPART.10201
OHPART.10202
OHPART.10203
OHPART.10204
OHPART.10205
OHPART.10206
OHPART.10207
OHPART.10208
OHPART.10209
OHPART.10210
OHPART.10211
OHPART.10212
OHPART.10213
OHPART.10214
OHPART.10215
OHPART.10216
OHPART.10217
OHPART.10218
OHPART.10219
OHPART.10220
OHPART.10221
OHPART.10222
$67.00
61.00
61.00
61.00
67.00
57.00
47.00
47.00
47.00
47.00
47.00
61.00
57.00
57.00
57.00
61.00
49.00
38.00
38.00
38.00
38.00
38.00
80 and 81 Series
80/81 Handle, Spring & Plunger Pkg
80/81 Handle, Spring & Plunger Pkg
80/81 Handle, Spring & Plunger Pkg
80/81 Handle, Spring & Plunger Pkg
80/81 Handle, Spring & Plunger Pkg
80/81 Handle, Spring & Plunger Pkg
80/81 Handle, Spring & Plunger Pkg
80/81 Handle, Spring & Plunger Pkg
80/81 Handle, Spring & Plunger Pkg
80/81 Handle, Spring & Plunger Pkg
80/81 Handle, Spring & Plunger Pkg
80/81 Handle
80/81 Handle
80/81 Handle
80/81 Handle
80/81 Handle
80/81 Handle
80/81 Handle
80/81 Handle
80/81 Handle
80/81 Handle
80/81 Handle
Prices subject to change without notice.
22
Price Book 2
Effective February 1, 2016 • Rev. 5/16
80 and 81 Series
80 and 81 Series (continued)
Description
80/81 Plunger
80/81 Plunger Spring
81 Channel
81 Channel
81 Channel
81 Channel
81 Channel
81 Channel
81 Channel
81/90 End Cap
81 Shock Spring
80 Mounting Pkg, 1 3/4" Door
80 Mounting Pkg, 1 3/4" Door
80 Mounting Pkg, 1 3/4" Door
80 Mounting Pkg, 1 3/4" Door
80 Mounting Pkg, 1 3/4" Door
80HD Mounting Pkg, 1 3/4" Door
80HD Mounting Pkg, 1 3/4" Door
80HD Mounting Pkg, 1 3/4" Door
80HD Mounting Pkg, 1 3/4" Door
80HD Mounting Pkg, 1 3/4" Door
81 Mounting Pkg, Up to 2 1/4" Door
81 Mounting Pkg, Up to 2 1/4" Door
81 Mounting Pkg, Up to 2 1/4" Door
81 Mounting Pkg, Up to 2 1/4" Door
81 Mounting Pkg, Up to 2 1/4" Door
80 Security Mounting Pkg, 1 3/4" Door
80HD Security Mounting Pkg, 1 3/4" Door
81 Security Mounting Pkg, Up to 2 1/4" Door
70/79/81/90 Angle Screw Pkg
70/79/81/90 Angle Screw Pkg
70/79/81/90 Angle Screw Pkg
70/79/81/90 Angle Screw Pkg
70/79/81/90 Angle Screw Pkg
Finish
Part No.
List Price Each
US3
US4
US10
US10B
US32
US32D
652
US3,US4,SP4
US10,SP10
US10B,SP313
US32,US32D,652,SP28
SPBLK
US3,US4,SP4
US10,SP10
US10B,SP313
US32,US32D,652,SP28
SPBLK
US3,US4,SP4
US10,SP10
US10B,SP313
US32,US32D ,652
SPBLK
US3,US4,SP4
US10,SP10
US10B,SP313
US32,US32D,SP28
SPBLK
OHPART.10223
OHPART.10224
OHPART.10244
OHPART.10245
OHPART.10246
OHPART.10247
OHPART.10248
OHPART.10249
OHPART.10250
OHPART.10256
OHPART.10257
OHPART.10226
OHPART.10227
OHPART.10228
OHPART.10229
OHPART.10230
OHPART.10231
OHPART.10232
OHPART.10233
OHPART.10234
OHPART.10235
OHPART.10236
OHPART.10237
OHPART.10238
OHPART.10239
OHPART.10240
OHPART.10241
OHPART.10242
OHPART.10243
OHPART.10049
OHPART.10050
OHPART.10051
OHPART.10052
OHPART.10053
$9.00
7.00
68.00
61.00
61.00
61.00
68.00
47.00
30.00
20.00
9.00
32.00
32.00
32.00
32.00
32.00
48.00
48.00
48.00
48.00
48.00
32.00
32.00
32.00
32.00
32.00
23.00
29.00
23.00
9.00
9.00
9.00
9.00
9.00
Prices subject to change without notice.
Price Book 2
Effective February 1, 2016 • Rev. 5/16
23
90 Series
90 Series
How to Order Arm Assembly
2, 3, 4, 5, 6
Size - ARM90
Function - H (Hold Open), S (Stop Only),
F (Friction Hold Open), SE (Stop Only)
Finish - US3, US4, US10, US10B, US32, US32D, 652
SP4, SP10, SP313, SP28, SPBLK
4
H
–
US3
Description
Finish
List Price Each
90 Arm Assembly
90 Arm Assembly
90 Arm Assembly
90 Arm Assembly
90 Arm Assembly
90 Arm Assembly
90 Arm Assembly
90 Arm Assembly
90 Arm Assembly
90 Arm Assembly
90 Arm Assembly
90 Arm Assembly
US3
US4
US10
US10B
US32
US32D
652
SP4
SP10
SP313
SP28
SPBLK
$220.00
202.00
202.00
214.00
220.00
191.00
142.00
122.00
122.00
122.00
122.00
122.00
90 Series
How to Order Channel Assembly
2, 3, 4, 5, 6
Size - CHANNEL 90
Function - H (Hold Open), S (Stop Only),
F (Friction Hold Open), SE (Stop Only)
Finish - US3, US4, US10, US10B, US32, US32D, 652
SP4, SP10, SP313, SP28, SPBLK
4
H
–
US3
Description
Finish
List Price Each
90 Channel Assembly - H, S or F
90 Channel Assembly - H,S or F
90 Channel Assembly - H, S or F
90 Channel Assembly - H,S or F
90 Channel Assembly - H, S or F
90 Channel Assembly - H,S or F
90 Channel Assembly - H, S or F
90 Channel Assembly - H,S or F
90 Channel Assembly - H, S or F
90 Channel Assembly - H,S or F
90 Channel Assembly - H, S or F
90 Channel Assembly - H,S or F
US3
US4
US10
US10B
US32
US32D
652
SP4
SP10
SP313
SP28
SPBLK
$263.00
236.00
236.00
251.00
263.00
229.00
171.00
142.00
142.00
142.00
142.00
142.00
Prices subject to change without notice.
24
Price Book 2
Effective February 1, 2016 • Rev. 5/16
90 Series
90 Series (continued)
Description
90 Channel Assembly - SE
90 Channel Assembly - SE
90 Channel Assembly - SE
90 Channel Assembly - SE
90 Channel Assembly - SE
90 Channel Assembly - SE
90 Channel Assembly - SE
90 Channel Assembly - SE
90 Channel Assembly - SE
90 Channel Assembly - SE
90 Channel Assembly - SE
90 Channel Assembly - SE
70/79/81/90 Angle Screw Pkg
70/79/81/90 Angle Screw Pkg
70/79/81/90 Angle Screw Pkg
70/79/81/90 Angle Screw Pkg
70/79/81/90 Angle Screw Pkg
90 Hold Open Conversion Kit
90 Friction Hold Open Conversion Kit
l 90 End Cap
l 90 End Cap & Spring Assy.
l 90 Mounting Pkg, Up to 2 1/4" Dr.
l 90 Mounting Pkg, Up to 2 1/4" Dr.
l 90 Mounting Pkg, Up to 2 1/4" Dr.
l 90 Mounting Pkg, Up to 2 1/4" Dr.
l 90 Mounting Pkg, Up to 2 1/4" Dr.
l 90 SE Conversion Kit
l 90 Security Mount Pkg 2 1/4"
Finish
US3
US4
US10
US10B
US32
US32D
652
SP4
SP10
SP313
SP28
SPBLK
US3,US4,SP4
US10,SP10
US10B,SP313
US32,US32D,SP28
SPBLK
SPBLK
SPBLK
US3,US4,SP4
US10,SP10
US10B,SP313
US32,US32D,652,SP28
SPBLK
SPBLK
-
Part No.
List Price Each
OHPART.10049
OHPART.10050
OHPART.10051
OHPART.10052
OHPART.10053
OHPART.10325
OHPART.10326
OHPART.11103
OHPART.11104
OHPART.11105
OHPART.11106
OHPART.11107
OHPART.11108
OHPART.11109
OHPART.11110
OHPART.10243
$314.00
287.00
287.00
302.00
314.00
280.00
222.00
193.00
193.00
193.00
193.00
193.00
9.00
9.00
9.00
9.00
9.00
29.00
20.00
20.00
26.00
48.00
48.00
48.00
48.00
48.00
29.00
23.00
l For Overheads shipped after October 1, 2006.
Prices subject to change without notice.
Price Book 2
Effective February 1, 2016 • Rev. 5/16
25
100 Series
100 Series
How to Order Arm Assembly
Size
-
1, 2, 3, 4, 5, 6
Function - ARM10
4
H
–
US3
H (Hold Open), S (Stop Only), HP (Internal Hold Open)
F (Friction Hold Open), SE (Stop Only)
Optional Jamb Bracket - ADJ - Adjustable Jamb Bracket
CJLH, CJRH - LCN5030 Jamb Bracket
Finish - US3, US4, US10, US10B, US32, US32D
SP4, SP10, SP313, SP28, SPBLK
Description
Finish
List Price Each
100 Arm Assembly - Not ADJ, CJLH or CJRH
100 Arm Assembly - Not ADJ,CJLH or CJRH
100 Arm Assembly - Not ADJ,CJLH or CJRH
100 Arm Assembly - Not ADJ,CJLH or CJRH
100 Arm Assembly - Not ADJ,CJLH or CJRH
100 Arm Assembly - Not ADJ,CJLH or CJRH
100 Arm Assembly - Not ADJ,CJLH or CJRH
100 Arm Assembly - Not ADJ,CJLH or CJRH
100 Arm Assembly - Not ADJ,CJLH or CJRH
100 Arm Assembly - Not ADJ,CJLH or CJRH
100 Arm Assembly - Not ADJ,CJLH or CJRH
100 Arm Assembly with ADJ
100 Arm Assembly with ADJ
100 Arm Assembly with ADJ
100 Arm Assembly with ADJ
100 Arm Assembly with ADJ
100 Arm Assembly with ADJ
100 Arm Assembly with ADJ
100 Arm Assembly with ADJ
100 Arm Assembly with ADJ
100 Arm Assembly with ADJ
100 Arm Assembly with ADJ
100 Arm Assembly with CJLH or CJRH
100 Arm Assembly with CJLH or CJRH
100 Arm Assembly with CJLH or CJRH
100 Arm Assembly with CJLH or CJRH
100 Arm Assembly with CJLH or CJRH
100 Arm Assembly with CJLH or CJRH
100 Arm Assembly with CJLH or CJRH
100 Arm Assembly with CJLH or CJRH
100 Arm Assembly with CJLH or CJRH
100 Arm Assembly with CJLH or CJRH
100 Arm Assembly with CJLH or CJRH
US3
US4
US10
US10B
US32
US32D
SP4
SP10
SP313
SP28
SPBLK
US3
US4
US10
US10B
US32
US32D
SP4
SP10
SP313
SP28
SPBLK
US3
US4
US10
US10B
US32
US32D
SP4
SP10
SP313
SP28
SPBLK
$206.00
194.00
191.00
194.00
206.00
181.00
181.00
181.00
181.00
181.00
181.00
262.00
250.00
247.00
250.00
262.00
237.00
237.00
237.00
237.00
237.00
237.00
261.00
249.00
246.00
249.00
261.00
236.00
236.00
236.00
236.00
236.00
236.00
Prices subject to change without notice.
26
Price Book 2
Effective February 1, 2016 • Rev. 5/16
100 Series
100 Series (continued)
How to Order Channel Assembly
Size
-
1, 2, 3, 4, 5, 6
Function - CHANNEL 10
4
H
–
H (Hold Open), S (Stop Only), HP (Internal Hold Open)
F (Friction Hold Open), SE (Stop Only)
Optional Jamb Bracket - ADJ - Adjustable Jamb Bracket
Description
100 Channel Assembly, Not ADJ or SE
100 Channel Assembly with ADJ
100 Channel Assembly with SE
100H Knob Pkg
100H Knob Pkg
100H Knob Pkg
100H Knob Pkg
100H Knob Pkg
100 Mounting Pkg
100 Mounting Pkg
100 Mounting Pkg
100 Mounting Pkg
100 Mounting Pkg
100ADJ Mounting Pkg
100ADJ Mounting Pkg
100ADJ Mounting Pkg
100ADJ Mounting Pkg
100ADJ Mounting Pkg
100 Security Mounting Pkg
100ADJ Security Mounting Pkg
100ADJ Set Screw (Pkg of 10)
100F Conversion Kit
100H Conversion Kit
100H Conversion Kit
100H Conversion Kit
100H Conversion Kit
100H Conversion Kit
100ADJ Jamb Channel
100ADJ Jamb Channel
100ADJ Jamb Channel
100ADJ Jamb Channel
100ADJ Jamb Channel
100ADJ Jamb Channel
100ADJ Jamb Channel
100ADJ Jamb Channel
100ADJ Jamb Channel
100ADJ Jamb Channel
100ADJ Jamb Channel
100 Grommet (Pkg of 10)
100 SE KIT
Finish
Part No.
US3,US4,SP4
US10,SP10
US10B,SP313
US32,US32D,SP28
SPBLK
US3,US4,SP4
US10,SP10
US10B,SP313
US32,US32D,SP28
SPBLK
US3,US4,SP4
US10,SP10
US10B,SP313
US32,US32D,SP28
SPBLK
US3,US4,SP4
US10,SP10
US10B,SP313
US32,US32D,SP28
SPBLK
US3
US4
US10
US10B
US32
US32D
SP4
SP10
SP313
SP28
SPBLK
-
List Price Each
$229.00
254.00
257.00
OHPART.10401
OHPART.10402
OHPART.10403
OHPART.10404
OHPART.10405
OHPART.10406
OHPART.10407
OHPART.10408
OHPART.10409
OHPART.10410
OHPART.10411
OHPART.10412
OHPART.10413
OHPART.10414
OHPART.10415
OHPART.10416
OHPART.10417
OHPART.10418
OHPART.10419
OHPART.10420
OHPART.10421
OHPART.10422
OHPART.10423
OHPART.10424
OHPART.10425
OHPART.10426
OHPART.10427
OHPART.10428
OHPART.10429
OHPART.10430
OHPART.10431
OHPART.10432
OHPART.10433
OHPART.10434
OHPART.10435
OHPART.10436
OHPART.10437
25.00
25.00
25.00
25.00
25.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
9.00
9.00
7.00
20.00
59.00
59.00
59.00
59.00
59.00
78.00
78.00
78.00
78.00
78.00
78.00
68.00
68.00
68.00
68.00
68.00
16.00
80.00
Prices subject to change without notice.
Price Book 2
Effective February 1, 2016 • Rev. 5/16
27
410/450 Series
410/450 Series
How to Order Arm Assembly
Size
-
1, 2, 3, 4, 5
ARM41/45
Function - H (Hold Open), S (Stop Only)
F (Friction Hold Open), SE (Stop Only)
Finish - US3, US4, US10, US10B, US32, US32D, 652
SP4, SP10, SP313, SP28, SPBLK
4
H
US3
Description
Finish
List Price Each
410/450 Arm Assembly
410/450 Arm Assembly
410/450 Arm Assembly
410/450 Arm Assembly
410/450 Arm Assembly
410/450 Arm Assembly
410/450 Arm Assembly
410/450 Arm Assembly
410/450 Arm Assembly
410/450 Arm Assembly
410/450 Arm Assembly
410/450 Arm Assembly
US3
US4
US10
US10B
US32
US32D
652
SP4
SP10
SP313
SP28
SPBLK
$103.00
87.00
90.00
95.00
103.00
85.00
59.00
59.00
59.00
59.00
59.00
59.00
How to Order Channel Assembly
41 (410 Series), 45 (450 Series)
Model - CHANNEL
Size
-
Function - 1, 2, 3, 4, 5
Finish - US3, US4, US10, US10B, US32, US32D, 652
SP4, SP10, SP313, SP28, SPBLK
41
4
H
US10
H (Hold Open), S (Stop Only)
F (Friction Hold Open), SE (Stop Only)
Description
Finish
List Price Each
450 Channel Assembly, Not SE
450 Channel Assembly, Not SE
450 Channel Assembly, Not SE
450 Channel Assembly, Not SE
450 Channel Assembly, Not SE
450 Channel Assembly, Not SE
450 Channel Assembly, Not SE
450 Channel Assembly, Not SE
450 Channel Assembly, Not SE
450 Channel Assembly, Not SE
450 Channel Assembly, Not SE
450 Channel Assembly, Not SE
US3
US4
US10
US10B
US32
US32D
652
SP4
SP10
SP313
SP28
SPBLK
$145.00
128.00
128.00
135.00
145.00
122.00
88.00
88.00
88.00
88.00
88.00
88.00
Prices subject to change without notice.
28
Price Book 2
Effective February 1, 2016 • Rev. 5/16
410/450 Series
410/450 Series (continued)
Description
Finish
450SE Channel Assembly
450SE Channel Assembly
450SE Channel Assembly
450SE Channel Assembly
450SE Channel Assembly
450SE Channel Assembly
450SE Channel Assembly
450SE Channel Assembly
450SE Channel Assembly
450SE Channel Assembly
450SE Channel Assembly
450SE Channel Assembly
410 Channel Assembly, Not SE
410SE Channel Assembly
US3
US4
US10
US10B
US32
US32D
652
SP4
SP10
SP313
SP28
SPBLK
-
450 Old Style End Cap *
450 Old Style End Cap *
450 Old Style End Cap *
450 Old Style End Cap *
450 Old Style End Cap *
450 Old Style End Cap *
450 Old Style End Cap & Spring Assy *
450 Old Style End Cap & Spring Assy *
450 Old Style End Cap & Spring Assy *
450 Old Style End Cap & Spring Assy *
450 Old Style End Cap & Spring Assy *
450 Old Style End Cap & Spring Assy *
450 Old Style End Cap Key (Pkg of 20) *
410 Old Style End Cap *
410 Old Style End Cap & Spring Assy *
410/450 New Style End Cap *
410/450 New Style End Cap Assy *
450 Mounting Pkg, 1 3/4" Door
450 Mounting Pkg, 1 3/4" Door
450 Mounting Pkg, 1 3/4" Door
450 Mounting Pkg, 1 3/4" Door
450 Mounting Pkg, 1 3/4" Door
450 Security Mounting Pkg, 1 3/4" Door
450 Mounting Pkg, Up to 2 1/4" Door
450 Mounting Pkg, Up to 2 1/4" Door
450 Mounting Pkg, Up to 2 1/4" Door
450 Mounting Pkg, Up to 2 1/4" Door
450 Mounting Pkg, Up to 2 1/4" Door
450 Mounting Pkg, Up to 1 3/8" Door
450 Mounting Pkg, Up to 1 3/8" Door
450 Mounting Pkg, Up to 1 3/8" Door
450 Mounting Pkg, Up to 1 3/8" Door
450 Mounting Pkg, Up to 1 3/8" Door
US3,US4,SP4
US10,SP10
US10B,SP313
US32
US32D,652,SP28
SPBLK
US3,US4,SP4
US10,SP10
US10B,SP313
US32
US32D,652,SP28
SPBLK
US3,US4,SP4
US10,SP10
US10B,SP313
US32,US32D,652,SP28
SPBLK
US3,US4,SP4
US10,SP10
US10B,SP313
US32,US32D,652,SP28
SPBLK
US3,US4,SP4
US10,SP10
US10B,SP313
US32,US32D,652,SP28
SPBLK
Part No.
List Price Each
$168.00
152.00
152.00
159.00
168.00
146.00
112.00
112.00
112.00
112.00
112.00
112.00
61.00
85.00
OHPART.10501
OHPART.10502
OHPART.10503
OHPART.10504
OHPART.10505
OHPART.10506
OHPART.10507
OHPART.10508
OHPART.10509
OHPART.10510
OHPART.10511
OHPART.10512
OHPART.10513
OHPART.10514
OHPART.10515
OHPART.10516
OHPART.10517
OHPART.10518
OHPART.10519
OHPART.10520
OHPART.10521
OHPART.10522
OHPART.10523
OHPART.10524
OHPART.10525
OHPART.10526
OHPART.10527
OHPART.10528
OHPART.10529
OHPART.10530
OHPART.10531
OHPART.10532
OHPART.10533
11.00
11.00
11.00
26.00
11.00
11.00
20.00
20.00
20.00
30.00
20.00
20.00
9.00
9.00
11.00
9.00
11.00
9.00
9.00
9.00
9.00
9.00
23.00
18.00
18.00
18.00
18.00
18.00
35.00
35.00
35.00
35.00
35.00
* Note: Old style units were built before December 2002, End Cap has Mounting Hole in the End Cap.
New style units were built starting December 2002, the End Cap goes into the channel and the mountinghole goes through both the channel &
End Cap.
Prices subject to change without notice.
Price Book 2
Effective February 1, 2016 • Rev. 5/16
29
410/450 & 280 Series
410/450 Series (continued)
Description
410 Old Style Mounting Pkg *
410 Old Style Mounting Pkg *
410 Old Style Mounting Pkg *
410 Old Style Mounting Pkg *
410 Old Style Mounting Pkg *
410 New Style Mounting Pkg *
410 New Style Mounting Pkg *
410 New Style Mounting Pkg *
410 New Style Mounting Pkg *
410 New Style Mounting Pkg *
410 New Security Mounting Pkg
450 Angle Screw Pkg
450 Angle Screw Pkg
450 Angle Screw Pkg
450 Angle Screw Pkg
450 Angle Screw Pkg
410 Old Security Mounting Pkg, 1 3/4" Door
410/450 Hold Open Conversion Kit
410/450 Friction Hold Open Conversion Kit
450 SE Old Style Conversion Kit *
450 SE Old Style Conversion Kit *
450 SE Old Style Conversion Kit *
450 SE Old Style Conversion Kit *
450 SE Old Style Conversion Kit *
450 SE Old Style Conversion Kit *
410 SE Old Style Conversion Kit *
410/450 SE New Style Conversion Kit *
Finish
Part No.
List Price Each
US3,US4,SP4
US10,SP10
US10B,SP313
US32,US32D,652,SP28
SPBLK
US3,US4,SP4
US10,SP10
US10B,SP313
US32,US32D,652,SP28
SPBLK
US3,US4,SP4
US10,SP10
US10B,SP313
US32,US32D,SP28
SPBLK
US3,US4,SP4
US10,SP10
US10B,SP313
US32
US32D,652,SP28
SPBLK
-
OHPART.10534
OHPART.10535
OHPART.10536
OHPART.10537
OHPART.10538
OHPART.10539
OHPART.10540
OHPART.10541
OHPART.10542
OHPART.10543
OHPART.10554
OHPART.10556
OHPART.10557
OHPART.10558
OHPART.10559
OHPART.10560
OHPART.10555
OHPART.10544
OHPART.10545
OHPART.10546
OHPART.10547
OHPART.10548
OHPART.10549
OHPART.10550
OHPART.10551
OHPART.10552
OHPART.10553
$14.00
14.00
14.00
14.00
14.00
20.00
20.00
20.00
20.00
20.00
17.00
9.00
9.00
9.00
9.00
9.00
17.00
33.00
25.00
33.00
33.00
33.00
33.00
33.00
33.00
30.00
30.00
* Note: Old style units were built before December 2002, End Cap has Mounting Hole in the End Cap.
New style units were built starting December 2002, the End Cap goes into the channel and the mountinghole goes through both the channel &
End Cap.
280 Series
Description
Finish
Part No.
List Price Each
280 Arm Assembly
280 Arm Assembly
280 Mounting Package
280 Mounting Package
280 Security Mounting Package
US28
313AN
US28
313AN
-
OHPART.10601
OHPART.10602
OHPART.10603
OHPART.10604
OHPART.10605
$135.00
135.00
30.00
30.00
22.00
Prices subject to change without notice.
30
Price Book 2
Effective February 1, 2016 • Rev. 5/16
Push / Pull Latches
How to Order Handle Assembly
Model -
HL6
HL6M - HL6 Mortise Lock Version
PL7 - Push Side Thumbturn
PL8 - Pull Side Thumbturn
Material -
Options - B - Brass Material for US26D
Style - PUSH
PULL
Finish - US3, US4, US10, US10B, US26, US26D, US32, US32D
HANDLE
– HL6
– PUSH
– US3
Engraving - Up, Down, Towards, Away
EO (Exit Only), EN (Entrance Only)
Engraved Up
Engraved Down
Engrave Towards
HL6/PL7/PL8 Series
Description
HL6 Push or Pull Handle Assy with No Options
HL6 Push or Pull Handle Assy with No Options
HL6 Push or Pull Handle Assy with No Options
HL6 Push or Pull Handle Assy with No Options
HL6 Push or Pull Handle Assy with No Options
HL6 Push or Pull Handle Assy with No Options
HL6 Push or Pull Handle Assy with No Options
HL6 Push or Pull Handle Assy with No Options
HL6 Push or Pull Handle Assy with No Options
HL6EO Push or EN Pull Handle Assy
HL6EO Push or EN Pull Handle Assy
HL6EO Push or EN Pull Handle Assy
HL6EO Push or EN Pull Handle Assy
HL6EO Push or EN Pull Handle Assy
HL6EO Push or EN Pull Handle Assy
HL6EO Push or EN Pull Handle Assy
HL6EO Push or EN Pull Handle Assy
HL6EO Push or EN Pull Handle Assy
Finish
List Price Each
US3
US4
US10
US10B
US26
US26D
US26D (Brass)
US32
US32D
US3
US4
US10
US10B
US26
US26D
US26D(Brass)
US32
US32D
$137.00
127.00
127.00
137.00
135.00
111.00
123.00
131.00
127.00
137.00
127.00
127.00
137.00
135.00
111.00
123.00
131.00
124.00
Prices subject to change without notice.
Price Book 2
Effective February 1, 2016 • Rev. 5/16
31
Push / Pull Latches
HL6/PL7/PL8 Series (continued)
Description
HL6 Engraved Push or Pull Handle Assy
HL6 Engraved Push or Pull Handle Assy
HL6 Engraved Push or Pull Handle Assy
HL6 Engraved Push or Pull Handle Assy
HL6 Engraved Push or Pull Handle Assy
HL6 Engraved Push or Pull Handle Assy
HL6 Engraved Push or Pull Handle Assy
HL6 Engraved Push or Pull Handle Assy
HL6 Engraved Push or Pull Handle Assy
HL6M Push or Pull Handle Assy
HL6M Push or Pull Handle Assy
HL6M Push or Pull Handle Assy
HL6M Push or Pull Handle Assy
HL6M Push or Pull Handle Assy
HL6M Push or Pull Handle Assy
HL6M Push or Pull Handle Assy
HL6M Push or Pull Handle Assy
HL6M Push or Pull Handle Assy
HL6M Engraved Push or Pull Handle Assy
HL6M Engraved Push or Pull Handle Assy
HL6M Engraved Push or Pull Handle Assy
HL6M Engraved Push or Pull Handle Assy
HL6M Engraved Push or Pull Handle Assy
HL6M Engraved Push or Pull Handle Assy
HL6M Engraved Push or Pull Handle Assy
HL6M Engraved Push or Pull Handle Assy
HL6M Engraved Push or Pull Handle Assy
PL7/PL8 Push or Pull Handle Assy
PL7/PL8 Push or Pull Handle Assy
PL7/PL8 Push or Pull Handle Assy
PL7/PL8 Push or Pull Handle Assy
PL7/PL8 Push or Pull Handle Assy
PL7/PL8 Push or Pull Handle Assy
PL7/PL8 Push or Pull Handle Assy
PL7/PL8 Push or Pull Handle Assy
PL7/PL8 Push or Pull Handle Assy
PL7/PL8 Engraved Push or Pull Handle Assy
PL7/PL8 Engraved Push or Pull Handle Assy
PL7/PL8 Engraved Push or Pull Handle Assy
PL7/PL8 Engraved Push or Pull Handle Assy
PL7/PL8 Engraved Push or Pull Handle Assy
PL7/PL8 Engraved Push or Pull Handle Assy
PL7/PL8 Engraved Push or Pull Handle Assy
PL7/PL8 Engraved Push or Pull Handle Assy
PL7/PL8 Engraved Push or Pull Handle Assy
HL6/HL6M Cover Pkg
HL6/HL6M Cover Pkg
HL6/HL6M Cover Pkg
HL6/HL6M Cover Pkg
HL6/HL6M Cover Pkg
HL6/HL6M Cover Pkg
Finish
US3
US4
US10
US10B
US26
US26D
US26D(Brass)
US32
US32D
US3
US4
US10
US10B
US26
US26D
US26D(Brass)
US32
US32D
US3
US4
US10
US10B
US26
US26D
US26D(Brass)
US32
US32D
US3
US4
US10
US10B
US26
US26D
US26D(Brass)
US32
US32D
US3
US4
US10
US10B
US26
US26D
US26D(Brass)
US32
US32D
US3
US4
US10
US10B
US26
US26D
Part No.
List Price Each
HLPART.10001
HLPART.10002
HLPART.10003
HLPART.10004
HLPART.10005
HLPART.10006
$151.00
141.00
141.00
151.00
149.00
125.00
137.00
145.00
141.00
137.00
127.00
127.00
137.00
135.00
111.00
123.00
131.00
127.00
151.00
141.00
141.00
151.00
149.00
125.00
137.00
145.00
141.00
173.00
164.00
164.00
173.00
168.00
144.00
155.00
173.00
164.00
187.00
178.00
178.00
187.00
183.00
158.00
170.00
187.00
178.00
79.00
71.00
71.00
79.00
79.00
62.00
Prices subject to change without notice.
32
Price Book 2
Effective February 1, 2016 • Rev. 5/16
Push / Pull Latches
HL6/PL7/PL8 Series (continued)
Description
HL6/HL6M Cover Pkg
HL6/HL6M Cover Pkg
HL6/HL6M Cover Pkg
PL7/PL8 Coin Release Cover Pkg
PL7/PL8 Coin Release Cover Pkg
PL7/PL8 Coin Release Cover Pkg
PL7/PL8 Coin Release Cover Pkg
PL7/PL8 Coin Release Cover Pkg
PL7/PL8 Coin Release Cover Pkg
PL7/PL8 Coin Release Cover Pkg
PL7/PL8 Coin Release Cover Pkg
PL7/PL8 Coin Release Cover Pkg
PL7/PL8 Thumbturn Cover Pkg
PL7/PL8 Thumbturn Cover Pkg
PL7/PL8 Thumbturn Cover Pkg
PL7/PL8 Thumbturn Cover Pkg
PL7/PL8 Thumbturn Cover Pkg
PL7/PL8 Thumbturn Cover Pkg
PL7/PL8 Thumbturn Cover Pkg
PL7/PL8 Thumbturn Cover Pkg
PL7/PL8 Thumbturn Cover Pkg
PL7/PL8 Coin Release Pkg
PL7/PL8 Coin Release Pkg
PL7/PL8 Coin Release Pkg
PL7/PL8 Coin Release Pkg
PL7/PL8 Coin Release Pkg
PL7/PL8 Coin Release Pkg
PL7/PL8 Thumbturn Pkg
PL7/PL8 Thumbturn Pkg
PL7/PL8 Thumbturn Pkg
PL7/PL8 Thumbturn Pkg
PL7/PL8 Thumbturn Pkg
PL7/PL8 Thumbturn Pkg
HL6/PL7/PL8 Standard Strike Pkg
HL6/PL7/PL8 Standard Strike Pkg
HL6/PL7/PL8 Standard Strike Pkg
HL6/PL7/PL8 Standard Strike Pkg
HL6/PL7/PL8 Standard Strike Pkg
HL6/PL7/PL8 ASA Strike Pkg
HL6/PL7/PL8 ASA Strike Pkg
HL6/PL7/PL8 ASA Strike Pkg
HL6/PL7/PL8 ASA Strike Pkg
HL6/PL7/PL8 ASA Strike Pkg
HL6M ASA Strike Pkg
HL6M ASA Strike Pkg
HL6M ASA Strike Pkg
HL6M ASA Strike Pkg
HL6M ASA Strike Pkg
HL6M-BT Strike Pkg
HL6/PL7/PL8 RL Strike Pkg
HL6/PL7/PL8 RL Strike Pkg
HL6/PL7/PL8 RL Strike Pkg
HL6/PL7/PL8 RL Strike Pkg
HL6/PL7/PL8 RL Strike Pkg
Finish
Part No.
List Price Each
US26D(Brass)
US32
US32D
US3
US4
US10
US10B
US26
US26D
US26D(Brass)
US32
US32D
US3
US4
US10
US10B
US26
US26D
US26D(Brass)
US32
US32D
US3
US4
US10
US10B
US26,US32
US26D,US32D
US3
US4
US10
US10B
US26,US32
US26D,US32D
US3
US4
US10
US10B
US26,US26D,US32,US32D
US3
US4
US10
US10B
US26,US26D,US32,US32D
US3
US4
US10
US10B
US26,US26D,US32,US32D
US3, US4, US10, US10B, US26, US26D
US3
US4
US10
US10B
US26,US26D,US32,US32D
HLPART.10007
HLPART.10008
HLPART.10009
HLPART.10010
HLPART.10011
HLPART.10012
HLPART.10013
HLPART.10014
HLPART.10015
HLPART.10016
HLPART.10017
HLPART.10018
HLPART.10019
HLPART.10020
HLPART.10021
HLPART.10022
HLPART.10023
HLPART.10024
HLPART.10025
HLPART.10026
HLPART.10027
HLPART.10028
HLPART.10029
HLPART.10030
HLPART.10031
HLPART.10032
HLPART.10033
HLPART.10034
HLPART.10035
HLPART.10036
HLPART.10037
HLPART.10038
HLPART.10039
HLPART.10040
HLPART.10041
HLPART.10042
HLPART.10043
HLPART.10044
HLPART.10045
HLPART.10046
HLPART.10047
HLPART.10048
HLPART.10049
HLPART.10050
HLPART.10051
HLPART.10052
HLPART.10053
HLPART.10054
860092-XX
HLPART.10055
HLPART.10056
HLPART.10057
HLPART.10058
HLPART.10059
$71.00
75.00
71.00
111.00
101.00
101.00
111.00
111.00
94.00
102.00
106.00
106.00
179.00
174.00
174.00
179.00
179.00
164.00
173.00
177.00
174.00
28.00
28.00
28.00
28.00
28.00
28.00
96.00
96.00
96.00
96.00
96.00
96.00
27.00
27.00
27.00
27.00
27.00
27.00
27.00
27.00
27.00
27.00
20.00
20.00
20.00
20.00
20.00
58.00
20.00
20.00
20.00
20.00
20.00
Prices subject to change without notice.
Price Book 2
Effective February 1, 2016 • Rev. 5/16
33
Push / Pull Latches
HL6/PL7/PL8 Series (continued)
Description
HL6/PL7/PL8 2 3/4" Latchbolt Pkg
HL6/PL7/PL8 2 3/4" Latchbolt Pkg
HL6/PL7/PL8 2 3/4" Latchbolt Pkg
HL6/PL7/PL8 2 3/4" Latchbolt Pkg
HL6/PL7/PL8 2 3/4" Latchbolt Pkg
HL6/PL7/PL8 2 3/4" Latchbolt Pkg
HL6/PL7/PL8 3 3/4" Latchbolt Pkg
HL6/PL7/PL8 3 3/4" Latchbolt Pkg
HL6/PL7/PL8 3 3/4" Latchbolt Pkg
HL6/PL7/PL8 3 3/4" Latchbolt Pkg
HL6/PL7/PL8 3 3/4" Latchbolt Pkg
HL6/PL7/PL8 3 3/4" Latchbolt Pkg
HL6/PL7/PL8 5" Latchbolt Pkg
HL6/PL7/PL8 5" Latchbolt Pkg
HL6/PL7/PL8 5" Latchbolt Pkg
HL6/PL7/PL8 5" Latchbolt Pkg
HL6/PL7/PL8 5" Latchbolt Pkg
HL6/PL7/PL8 5" Latchbolt Pkg
HL6/PL7/PL8 7" Latchbolt Pkg
HL6/PL7/PL8 7" Latchbolt Pkg
HL6/PL7/PL8 7" Latchbolt Pkg
HL6/PL7/PL8 7" Latchbolt Pkg
HL6/PL7/PL8 7" Latchbolt Pkg
HL6/PL7/PL8 7" Latchbolt Pkg
HL6/PL7/PL8RL Faceplate Adapter Pkg
HL6/PL7/PL8RL Faceplate Adapter Pkg
HL6/PL7/PL8RL Faceplate Adapter Pkg
HL6/PL7/PL8RL Faceplate Adapter Pkg
HL6/PL7/PL8RL Faceplate Adapter Pkg
HL6/PL7/PL8RL Faceplate Adapter Pkg
HL6/PL7/PL8RL Conversion Kit
HL6/PL7/PL8RL Conversion Kit
HL6/PL7/PL8RL Conversion Kit
HL6/PL7/PL8RL Conversion Kit
HL6/PL7/PL8RL Conversion Kit
HL6/PL7/PL8RL Conversion Kit
HL6M Armor Front - 9010,9040
HL6M Armor Front - 9010,9040
HL6M Armor Front - 9010,9040
HL6M Armor Front - 9010,9040
HL6M Armor Front - 9010,9040
HL6M Armor Front - 9010,9040
HL6M Armor Front - 9050/60/70/80/82
HL6M Armor Front - 9050/60/70/80/82
HL6M Armor Front - 9050/60/70/80/82
HL6M Armor Front - 9050/60/70/80/82
HL6M Armor Front - 9050/60/70/80/82
HL6M Armor Front - 9050/60/70/80/82
Finish
Part No.
List Price Each
US3
US4
US10
US10B
US26,US32
US26D,US32D
US3
US4
US10
US10B
US26,US32
US26D,US32D
US3
US4
US10
US10B
US26,US32
US26D,US32D
US3
US4
US10
US10B
US26,US32
US26D,US32D
US3
US4
US10
US10B
US26,US32
US26D,US32D
US3
US4
US10
US10B
US26,US32
US26D,US32D
US3
US4
US10
US10B
US26,US32
US26D,US32D
US3
US4
US10
US10B
US26,US32
US26D,US32D
HLPART.10060
HLPART.10061
HLPART.10062
HLPART.10063
HLPART.10064
HLPART.10065
HLPART.10066
HLPART.10067
HLPART.10068
HLPART.10069
HLPART.10070
HLPART.10071
HLPART.10072
HLPART.10073
HLPART.10074
HLPART.10075
HLPART.10076
HLPART.10077
HLPART.10078
HLPART.10079
HLPART.10080
HLPART.10081
HLPART.10082
HLPART.10083
HLPART.10084
HLPART.10085
HLPART.10086
HLPART.10087
HLPART.10088
HLPART.10089
HLPART.10090
HLPART.10091
HLPART.10092
HLPART.10093
HLPART.10094
HLPART.10095
HLPART.10096
HLPART.10097
HLPART.10098
HLPART.10099
HLPART.10100
HLPART.10101
HLPART.10102
HLPART.10103
HLPART.10104
HLPART.10105
HLPART.10106
HLPART.10107
$48.00
48.00
48.00
48.00
48.00
48.00
50.00
50.00
50.00
50.00
50.00
50.00
51.00
51.00
51.00
51.00
51.00
51.00
100.00
100.00
100.00
100.00
100.00
100.00
28.00
28.00
28.00
28.00
28.00
28.00
43.00
43.00
43.00
43.00
43.00
43.00
27.00
27.00
27.00
27.00
27.00
27.00
27.00
27.00
27.00
27.00
27.00
27.00
Prices subject to change without notice.
34
Price Book 2
Effective February 1, 2016 • Rev. 5/16
Push / Pull Latches
HL6/PL7/PL8 Series (continued)
Description
HL6M Armor Front - 9456/57/65/66/73
HL6M Armor Front - 9456/57/65/66/73
HL6M Armor Front - 9456/57/65/66/73
HL6M Armor Front - 9456/57/65/66/73
HL6M Armor Front - 9456/57/65/66/73
HL6M Armor Front - 9456/57/65/66/73
HL6M Armor Front - 9453/85/86
HL6M Armor Front - 9453/85/86
HL6M Armor Front - 9453/85/86
HL6M Armor Front - 9453/85/86
HL6M Armor Front - 9453/85/86
HL6M Armor Front - 9453/85/86
HL6M Emergency Button - 9040
HL6M Emergency Button - 9040
HL6M Emergency Button - 9040
HL6M Emergency Button - 9040
HL6M Emergency Button - 9040
HL6M Emergency Button - 9040
HL6M Thumbturn - 9040/50/9453/56/73/85/86
HL6M Thumbturn - 9040/50/9453/56/73/85/86
HL6M Thumbturn - 9040/50/9453/56/73/85/86
HL6M Thumbturn - 9040/50/9453/56/73/85/86
HL6M Thumbturn - 9040/50/9453/56/73/85/86
HL6M Thumbturn - 9040/50/9453/56/73/85/86
HL6EO/EN Backplate Assembly
HL6EO/EN Backplate Assembly
HL6EO/EN Backplate Assembly
HL6EO/EN Backplate Assembly
HL6EO/EN Backplate Assembly
HL6M Lock Body - 9010
HL6M Lock Body - 9040
HL6M Lock Body - 9050/60/70
HL6M Lock Body - 9080
HL6M Lock Body - 9082
HL6M Lock Body - 9092EL
HL6M Lock Body - 9092EU
HL6M Lock Body - 9092EL/RX
HL6M Lock Body - 9092EU/RX
HL6M Lock Body - 9095EL
HL6M Lock Body - 9095EU
HL6M Lock Body - 9453
HL6M Lock Body - 9456
HL6M Lock Body - 9465/66/73
HL6M Lock Body - 9485/86
HL6/PL7/PL8 Lead Lining - 2 3/4"
HL6/PL7/PL8 Lead Lining - 3 3/4"
HL6/PL7/PL8 Lead Lining - 5"
HL6/PL7/PL8 Lead Lining - 7"
HL6M Lead Lining
Finish
Part No.
List Price Each
US3
US4
US10
US10B
US26,US32
US26D,US32D
US3
US4
US10
US10B
US26,US32
US26D,US32D
US3
US4
US10
US10B
US26,US32
US26D,US32D
US3
US4
US10
US10B
US26,US32
US26D,US32D
US4
US10
US10B
US26,US32
US26D,US32D
-
HLPART.10108
HLPART.10109
HLPART.10110
HLPART.10111
HLPART.10112
HLPART.10113
HLPART.10114
HLPART.10115
HLPART.10116
HLPART.10117
HLPART.10118
HLPART.10119
HLPART.10120
HLPART.10121
HLPART.10122
HLPART.10123
HLPART.10124
HLPART.10125
HLPART.10126
HLPART.10127
HLPART.10128
HLPART.10129
HLPART.10130
HLPART.10131
HLPART.10133
HLPART.10134
HLPART.10135
HLPART.10136
HLPART.10137
HLPART.10138
HLPART.10139
HLPART.10140
HLPART.10141
HLPART.10146
HLPART.10685
HLPART.10686
HLPART.10687
HLPART.10688
HLPART.10689
HLPART.10690
HLPART.10149
HLPART.10150
HLPART.10151
HLPART.10152
HLPART.10153
HLPART.10154
HLPART.10155
HLPART.10156
HLPART.10157
$27.00
27.00
27.00
27.00
27.00
27.00
27.00
27.00
27.00
27.00
27.00
27.00
11.00
11.00
11.00
11.00
11.00
11.00
50.00
50.00
50.00
50.00
50.00
50.00
136.00
136.00
148.00
145.00
123.00
196.00
229.00
256.00
256.00
256.00
822.00
822.00
1067.00
1067.00
822.00
822.00
283.00
283.00
283.00
350.00
92.00
92.00
92.00
92.00
262.00
Prices subject to change without notice.
Price Book 2
Effective February 1, 2016 • Rev. 5/16
35
Push / Pull Latches
HL6/PL7/PL8 Series (continued)
Description
HL6/HL6M/PL7/PL8 Spring & Rivet Pkg
HL6 Old Style Spring(1 Coil) & Rivet Pkg
HL6/HL6M/PL7/PL8 Rivet Pkg
HL6M Mounting Plate
HL6/PL7/PL8 Mounting Pkg
HL6/PL7/PL8 Mounting Pkg
HL6/PL7/PL8 Mounting Pkg
HL6/PL7/PL8 Mounting Pkg
HL6EO/EN Mounting Pkg
HL6EO/EN Mounting Pkg
HL6EO/EN Mounting Pkg
HL6EO/EN Mounting Pkg
HL6M Mounting Pkg
HL6M Mounting Pkg
HL6M Mounting Pkg
HL6M Mounting Pkg
HL6/PL7/PL8 Security Mounting Pkg
HL6EO/EN Security Mounting Pkg
HL6M Security Mounting Pkg
HL6/HL6M,/PL7/PL8 Cover Screws(Pkg of 25)
HL6/HL6M,/PL7/PL8 Cover Screws(Pkg of 25)
HL6/HL6M,/PL7/PL8 Cover Screws(Pkg of 25)
HL6/HL6M,/PL7/PL8 Cover Screws(Pkg of 25)
HL6M Mounting Nut (Pkg of 25)
HL6M Armor Front Screws(Pkg of 10)
HL6M Armor Front Screws (Pkg of 10)
HL6M Armor Front Screws(Pkg of 10)
HL6M Armor Front Screws (Pkg of 10)
Finish
Part No.
List Price Each
US3,US4
US10
US10B
US26,US26D,US32,US32D
US3,US4
US10
US10B
US26,US26D,US32,US32D
US3,US4
US10
US10B
US26,US26D,US32,US32D
US3,US4
US10
US10B
US26,US26D,US32,US32D
US3,US4
US10
US10B
US26,US26D,US32,US32D
HLPART.10158
HLPART.10159
HLPART.10160
HLPART.10161
HLPART.10162
HLPART.10163
HLPART.10164
HLPART.10165
HLPART.10166
HLPART.10167
HLPART.10168
HLPART.10169
HLPART.10170
HLPART.10171
HLPART.10172
HLPART.10173
HLPART.10174
HLPART.10175
HLPART.10176
HLPART.10177
HLPART.10178
HLPART.10179
HLPART.10180
HLPART.10182
HLPART.10183
HLPART.10184
HLPART.10185
HLPART.10186
$12.00
12.00
11.00
11.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
22.00
27.00
27.00
27.00
27.00
27.00
27.00
27.00
9.00
11.00
11.00
11.00
11.00
Prices subject to change without notice.
36
Price Book 2
Effective February 1, 2016 • Rev. 5/16
GLYNN-JOHNSON WARRANTY
Glynn-Johnson (the "Company") warrants only to
Customer that the products will be free from defects in
material and workmanship for a period of 12 months
from the date of shipment of the products. The
Customer shall be obligated to promptly report any
failure to conform to this warranty in writing to the
Company within the warranty period provided above.
Company’s sole obligation under this warranty is limited
to repairing or replacing, at its option, the defective
products.
NO OTHER WARRANTIES, EXPRESS OR IMPLIED,
ARE MADE WITH RESPECT TO THE PRODUCTS
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE.
The provisions of this limited warranty do not apply to
products: (i) used for the purposes for which they are
not designed or intended; (ii) which have been repaired
or altered without Company's prior written consent;
(iii) which have been subjected to misuse, abuse,
negligence, or accident; (iv) which have been improperly
stored, installed, maintained, or operated; (v) which
have been used in violation of written instructions
provided by Company to Customer; (vi) which have
been subjected to improper temperature, humidity,
or other environmental conditions; (vii) which have
been affected by normal wear and tear; or (viii) which,
based on Company's examination, do not disclose
to Company's satisfaction nonconformance to the
warranty.
The following costs and expenses are not covered by
the provisions of this limited warranty: (i) labor costs for
the removal and reinstallation of products; (ii) shipping
and freight expenses required to return products to
Company; (iii) normal maintenance; and (iv) economic
losses. In addition, the provisions of this warranty
are not applicable to anything other than defects in
Company’s material (products only) or workmanship.
CONSUMER PRODUCTS. With respect to "consumer
products" as defined under the Magnuson-Moss
Warranty Act ("MMWA"), the following statements are
made. (a) Some states do not allow limitations on how
long an implied warranty lasts, so the above limitation
may not apply to you. IF ANY IMPLIED WARRANTY IS
PROVIDED UNDER THE MMWA, IT IS LIMITED TO THE
DURATION OF THE WARRANTY PROVIDED ABOVE.
(b) Some states do not allow the exclusion or limitation
of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. (c) This
warranty gives you specific legal rights and you may also
have other rights which vary from state to state.
Prices subject to change without notice.
Price Book 2
Effective February 1, 2016 • Rev. 5/16
37
Notes
Prices subject to change without notice.
38
Price Book 2
Effective February 1, 2016 • Rev. 5/16
Notes
Prices subject to change without notice.
Price Book 2
Effective February 1, 2016 • Rev. 5/16
39
About Allegion
Allegion (NYSE: ALLE) creates peace of mind by pioneering safety and security.
As a $2 billion provider of security solutions for homes and businesses, Allegion
employs more than 8,000 people and sells products in more than 120 countries
across the world. Allegion comprises 27 global brands, including strategic brands
CISA®
, Interflex®
, LCN®
, Schlage® and Von Duprin®
.
For more, visit www.allegion.com
© 2016 Allegion
allegion.ca