MIM
Multipurpose Interface Module
C
ubic’s Multipurpose Interface Module (MIM) is a
programmable interface and message translator for use
in controlling and connecting multiple rugged devices.
While many applications require at most a few dozen
input and output signals to be brought out to rugged
connectors, the MIM can manage up to 300 simultaneous
signals. The MIM design allows it to have new capabilities
added and existing ones changed with minimal changes
to the MIM hardware and software configuration. The
MIM is a versatile message and protocol translator. It
uses a large-scale, field-programmable gate array and
a general-purpose microprocessor to do required
translations and conversions. In the example shown, the
MIM is converting Ethernet control messages to RS-422
relay drivers, and TTL signals for device control. It has a
built-in temperature sensor and GPS receiver that can be
accessed by connected devices.
Interfaces Available..................................
Interface
Quantity
In/Out
+5VDC
2
Out
RS-232
4
In/out
RS-422/485
6
In/Out
LVDS
4
In/Out
TTL
16
In/Out
LVTTL
20
In/Out
Analog -10V to +10V
7
In
SPI
2
In/Out
Ethernet
4
In/Out
Relay drivers (open drain)
10
Out
Spare universal signals
50
In/Out
CAN bus
2
In/Out
USB (host or slave) 2
In/Out
Physical Characteristics
„„ Size.......................................... 5.3” x 2.9” x 1.1”
„„ Weight..................................... 1 lb.
„„ Power...................................... <5 W (10-33 VDC,
MIL-STD-704)
Environmental
„„ Vibration & shock.................... MIL-STD-810
„„ EMI/EMC................................. MIL-STD-461
„„ Operating temperature........... -40˚C to +55˚C
„„ Operating altitude................... up to 50,000 feet
9333 Balboa Avenue • San Diego, California • 92123 • USA • Phone 858-277-6780 • www.cubic.com
Copyright © 04/13 • CDA 11708_V2 • Cleared by DoD/OSR for Public Release under 13-S-0081 on 10/23/2012