GB
Product Catalogue 2015
Symbols
Contents
“EasyOn”
User-friendly starting system ensures a smooth pick-up of the engine with no
kickback, and limits the number of pulls required.
Power Sharp
Practical system that enables the chain to be sharpened in just 5 seconds without
the use of tools. Simply attach the sharpening stone device onto the guide bar
and operate the chain saw at maximum speed, pressing hard against the device
for several seconds.
VibCut
An antivibration system that isolates the engine from the handles and the body of
the machine, considerably reducing the vibrations transmitted to the user during
operation so as to guarantee maximum comfort and easy handling.
Rev&Go
Patented quick-fit mechanism for Multimate which enables the operator to switch
from one implement to another within seconds, without the need for tools.
SRS Safety Release System
Innovative quick release system allowing the operator to step away from the
machine in an instant, for maximum protection and safety.
4-Stroke
Four-stroke engines that reduce unburned hydrocarbon emissions by up to
85% and nitrogen oxide emissions by up to 65%. Tiltable through 360°, they run
smoothly in any position.
Pluscut
Multifunction lawnmowers with collection or mulching system (in mulching
operation the grass cuttings are finely shredded and distributed over the lawn
surface where they decompose rapidly to become an efficient natural fertiliser).
4-cutting device
Versatile cutting system that includes mulching, collection and side discharge as
standard, with optional deflector for rear discharge.
Deck Wash
Quick-fit connector for washing the cutting deck after use. Convenient and
practical, it helps keeps the deck in tip-top condition at all times.
Original accessories and spare parts
Quality mark identifying original Emak parts and accessories. Designed to the
most stringent quality standards, these items guarantee smoother operation of
the machine and longer service life.
Trees and hedges
4
Chain saws and pruners
6
Hedgetrimmers
10
Blower/Vacuum cleaners
12
The lawn
14
Multimate combined system
16
Brushcutters
20
Battery-powered products
26
Lawnmowers
28
Robotmowers
34
Scarifiers
36
Wheeled brushcutters/Flail mowers
38
Garden tractors
40
Protection of plants, hedges and lawns
44
Water pumps
46
Mistblowers
48
Sprayers
50
Other power equipment
52
High-pressure washers
54
Rotary tillers
56
Earth augers
58
Snow throwers
60
Transporters
62
Protective clothing
64
Accessories and spare parts
65
Service
66
Product range
Gardening, farming and forestry tools for home users and professionals. Emak covers all shades of green. With different models to meet each
user’s needs but all sharing the same exceptional quality standards in terms of performance, reliability, comfort and safety.
Home-plus
A range of machines aimed at the home user, for tidying and cleaning the
garden, cutting hedges and small trunks or stems, and DIY jobs in general.
Characterized by lightweight and compact construction, to make the task of the
operator that much simpler. Easy to start, easy to use, easy to maintain: these
are the ideal tools for getting things done quickly and neatly around the home.
Tough-tech
Solid and dependable, these are machines designed for heavy and frequent
use in countryside environments: clearing overgrown and uncultivated areas,
pruning and cutting firewood, crop irrigation and disinfestation tasks. Designed
adopting solutions certain to ensure high work rates and maximum durability
over time.
Sharp-pro
No-nonsense everyday tools for the busy professional, these are machines that
stand out for the toughness of their components, their high performance and
their matchless long-term durability. Specific materials used in construction
guarantee unwavering quality even when tackling the most severe and lengthy
of tasks, like forestry work and the clearance of uncultivated areas or scrub
and undergrowth.
Pruning trees
The beauty of a garden is reflected primarily in the show of
flourishing, healthy plants it contains. Be they evergreen
or deciduous, fruit-bearing or ornamental, trees are a
fundamental feature, whether of large landscaped areas and
parks or small town gardens, as they generate perspective
depth, create intimate and inviting corners, and give shade
in summer. Trees and plants need to be tended carefully
Trees and hedges
and treated continuously: so here are a few thoughts on
the more important operations involved in ensuring they are
properly looked after.
Why, how and when to prune?
There are several reasons why trees and plants need pruning:
to check excessive growth; to control the development
of grafted plants (fruit-bearing or ornamental); to promote
flowering or fruiting; to give new life to ageing or
weakened plants; to clear away dead branches that
have died off or are growing irregularly, and thus control
the shape of the plant; to correct imbalances caused
by previous pruning; and to favour the outcome of a
transplantation, reducing leaf transpiration.
Pruning requires skill and patience; it is important to keep the
harmony and growth of the tree in mind, avoiding injudicious
the type of plant – but equally, using the right technique: in effect,
and harmful actions such as indiscriminate cutting. Pruning must
the cut should be clean and made obliquely, near to a bud or a
be done at the proper time and in proper proportion – according to
knot, preferably on branches of smaller rather than large diameter.
Select the most suitable machine
The use of suitable pruning equipment will help to ensure that plants grow in the proper way and make them
easier to look after. Selection of the best tool is evaluated on the basis of individual needs and preferences, taking
the advice of experts.
Pruning operations can be done using chain saws and pruners: the market offers a wide variety of chain saws
to cater for the different requirements of users everywhere. Anyone with a small garden can use one of these
machines simply for pruning the thicker branches of trees, but if there happens to be a fireplace in the home, a
chainsaw will also be handy for chopping up logs. The same goes for pruners: small pruning chain saws that can
be used to cut branches located high up and not easily accessible.
4
Growing and keeping a luxuriant hedge
Before planting a hedge, care must be taken to plot the
position of trees or shrubs so as to ensure compliance with
legal constraints and with any pertinent local regulations.
The best time to plant a hedge is between the beginning
of autumn and the beginning of spring. To cultivate a full
hedge of the desired shape, the single bushes or shrubs
must be planted close together, and it will be necessary to
trim the topmost branches from the second year of growth
Care of hedges and collection of leaves
onwards, so as to encourage the growth of buds on the
lower branches. To achieve satisfying results and work in
Hedges help to increase the amount of green that meets the
safety, these are jobs that need to be done using the right
eye. They have a significant influence on the personality of
machines. The hedgetrimmer is designed for accuracy; it
a garden, not least as they can be fashioned into attractive
offers the kind of clean and sharp cut needed in order to
and original shapes.
obtain the desired visual effect and safeguard the health of
Essential operations in any maintenance programme include
the plant.
periodic thinning out of unduly dense growth, so that air
can circulate at the centre of the foliage and strengthen the
base of the plant; also keeping the outer surface compact
by frequently trimming new growth, being careful at the
same time not to take too much off and open up unsightly
and “holes” that can be harmful to the plant; and removing
dry or damaged growth, especially in spring and autumn.
Cleaning up leaves and other debris
Lawns and paths can be kept clear of leaves, twigs
and all kinds of debris using blowers and vacuum
cleaners, offered in hand-held and backpack versions.
From appliances available currently on the market, users
can find the technological solution best able to meet their particular operating requirements. These are specificpurpose machines, easy to handle, that will get the job done simply, swiftly and quietly. Certain models of
blower, generally with an internal combustion engine, can be converted easily to operate as vacuum cleaners by
fitting a special collection kit, with a blade by which vacuumed material is chopped up to reduce the volume when
inside the bag. They can also be equipped with anti-vibration systems that isolate the engine from the handgrips
and the body of the machine, significantly reducing the level of vibration transmitted to the operator when in use.
5
Chain saws and pruners
A complete range of items for
home and professional users
alike. Tools for DIY projects, cutting
up firewood, pruning, tree-felling.
Quality, dependable
performance, simplicity of
use and maintenance: winning
features offered by a family of
products designed with the
practical needs of users in mind,
and developed applying the very
latest technological solutions.
Proper maintenance of chain saw and
pruner
After every 8-10 hours of operation, remove the cover
and clean the air filter, replace if damaged or excessively
soiled.
Check the condition of the fuel filter periodically.
Clean the cylinder fins periodically by brushing, or
blasting with compressed air.
Inspect and clean the spark plug periodically.
Check the electrode gap periodically.
After every 30 hours of operation, remove the screw on
the bevel drive and check the grease level (pruner).
Check and, if necessary, replace the chain safety stop
(chain saw).
Turn the guide bar and make sure that the lubrication
holes are free from impurities (chain saw).
Guide to chain saw and pruner selection
For general tasks in and around the home, such as cutting up firewood, light pruning or small DIY building
jobs, an electric chain saw is just the job. Rated from 1.5 to 2 kW, this machine is ideal for performing
even the most demanding tasks quickly and comfortably.
For lopping and limbing, chopping down small plants and cutting up firewood, we recommend a lightweight
machine of between 4 and 5 Kg with a displacement of between 35 and 45 cm³.
For intensive work requiring maximum reliability and consistent long-term performance, the best machines
are professional chain saws, with over 50 cm³ displacement. Weighing just 5 to 10 Kg, they are ideal
for felling and cutting up large trees.
For pruning jobs, the ideal machines are professional pruning chain saws, which provide the perfect
blend of power, lightweight construction and easy handling. Equipped with a top handle, they are ideal
for professional pruning operations and other precision work, such as grafting or surgery carried out on
wounded or diseased plants.
For lopping and trimming overhead, or wherever there is uneven or sloping ground to contend with, a
pruner is best. Thanks to a telescopic pole, cuts can be made up to 5 metres above ground, and
therefore even on the highest branches. The saw itself is adjustable through intermediate angular settings
from 0° to 90°.
6
Electric chain saws
MT 1800 E
Power
Bar length
MT 2000 E
1.8 kW
2.0 kW
35 cm / 14"
41 cm / 16"
4.4 Kg
4.4 Kg
Dry weight without
bar and chain
MT 2000 E
Universal chain saws for home use
MT 350 S
MT 3500 S
Power
Bar length
Dry weight without
bar and chain
2.0 HP - 1.5 kW
35-41 cm
4.4 Kg
model MT 350 S available only in certain markets.
MT 3500 S
Universal chain saws for intensive home use
Power
Displacement
Bar length
Dry weight without
bar and chain
137
141 S
141 SP
MT 3700
MT 4100 S
MT 4100 SP
2.2 HP - 1.6 kW
2.5 HP - 1.8 kW
2.5 HP - 1.8 kW
3
35.2 cm
3
39.0 cm
39.0 cm3
35-41 cm
41 cm
41 cm
4.1 Kg
4.2 Kg
4.2 Kg
141 SP
Models 137, 141 S, and 141 SP available only in certain markets.
7
Chain saws for intensive use
MT 440
147
152
MT 4400
Power
Displacement
Bar length
Dry weight without
bar and chain
MT 5200
2.9 HP - 2.1 kW
3.1 HP - 2.3 kW
3
3.4 HP - 2.5 kW
45 cm
51.7 cm3
41-46 cm
41-46 cm
41-46 cm
4.3 Kg
4.9 Kg
5.0 Kg
42.9 cm
3
MT 4400
models MT 440, 152 available in certain markets only.
Professional chain saws
156
Power
Displacement
Bar length
Dry weight without
bar and chain
MT 7200
“Heavy Duty” professional chain saw
MT 6500
Power
Displacement
Bar length
Dry weight without
bar and chain
8
4.7 HP - 3.5 kW
63.4 cm³
46-51-61-71 cm
6.3 Kg
162
4.1 HP - 3.1 kW
4.7 HP - 3.5 kW
3
MT 8200
5.4 HP - 4.0 kW
6.0 HP - 4.4 kW
61.5 cm
70.8 cm
80.7 cm3
41-46-51 cm
46-51 cm
51-64-76 cm
51-64-76 cm
5.5 Kg
5.5 Kg
6.8 Kg
7.1 Kg
56.5 cm
3
MT 7200
3
Professional pruning chain saws
MT 2600
132 S
1.2 HP - 0.9 kW
1.6 HP - 1.2 kW
25.4 cm3
30.1 cm3
Bar length
25 cm
30-35 cm
Dry weight without
bar and chain
2.8 Kg
3.4 Kg
MT 2600
Power
Displacement
132 S
Professional pruner
PTX 2700
Power
Displacement
1.3 HP
27.0 cm3
Bar/Chain
10”- 3/8” x .043”
Overall length of
machine
2.60 m/3.80 m
Dry weight of
complete tool
without bar and
chain
7.4 Kg
9
Hedgetrimmers
Suitable for topiary and general
gardening; machines that do a
perfect job, characterized by the
cleanest of cutting actions.
These are machines featuring an
excellent blend of power with ease
of handling and operation: tools
anyone can use, young or old,
beginner or expert.
Quality blades are guaranteed to
give a clean cut, indispensable both
for the visual end result, and for the
health of plants.
Sharpen the blade periodically with the special tool
provided.
Clean the machine regularly with a soft brush or a cloth.
Periodically, inspect the air and fuel filter (models with
petrol engine), and replace if necessary.
Proper maintenance of hedgetrimmer
Check the condition of the blade. If excessive wear is
evident, contact a service centre.
After each session, free the blade of any debris that
has collected; when clean, spray the blade with a light
coating of thin oil to prevent rust.
Clean the cylinder fins regularly, using a brush or
compressed air (models with petrol engine).
Periodically, inspect the spark plug, check the electrode
gap (0.5 mm) and verify the condition of the exhaust
silencer (models with petrol engine).
Grease the speed reduction/drive mechanism every 20
working hours.
Guide to hedgetrimmer selection
For tending and cutting hedges with small trunks located near to houses, even in spaces where access
may be difficult, the best option is an electric model rated 600 or 700 Watts, guaranteeing agility, easy
handling and minimal noise.
On the other hand, professional hedgetrimmers are just what you need to confidently tackle all types
of hedge, no matter how tough or dense. Generally rated at over 600 Watt, they guarantee consistent
long-term efficiency with maximum productivity and minimum effort.
Hedgetrimmer blades can have single or double cutting edges and are between 60 and 75 cm in length.
Optional features such as the primer ensure trouble-free ignition even at low temperatures. The dual
safety switch and the shockproof material used in construction are designed to protect the user and
safeguard the integrity of the machine. The handgrip turns through 180° allowing operation even close
to walls, with the machine held at an angle.
10
Electric hedgetrimmer for home use
TG 605 E
Power
0.60 kW
Voltage
230 V
Blade type
double
Blade length
Weight
570 mm
3.6 Kg
Professional electric hedgetrimmer
TG 750 E
Power
0.70 kW
Voltage
230 V
Blade type
double
Bar length
700 mm
Weight
4.3 Kg
Professional petrol hedgetrimmers
TG 2650 XP
TG 2800 XP
TGS 2800 XP
DS 2400 H
DS 2400 HL
Power
0.75 kW
0.75 kW
0.75 kW
0.9 kW
0.9 kW
Displacement
21.7 cm³
21.7 cm³
21.7 cm³
21.7 cm³
21.7 cm³
Blade type
double
double
single
double blade,
rotatable through
12 positions from
0° to 180°
double blade,
rotatable through
12 positions from
0° to 180°
Bar length
600 mm
750 mm
750 mm
500 mm
500 mm
5.6 Kg
5.8 Kg
5.6 Kg
6.8 Kg
7.1 Kg
DS 2400 HL
Weight
11
Blower/Vacuum cleaners
Powerful and efficient tools for
clearing any surface of leaves,
twigs and debris generally, whether
for the home user or for the
professional operating
in public areas.
Special care has been taken over
the design of devices designed to
guarantee user comfort, also to
ensure low noise operation and
minimize environmental impact.
Proper maintenance of blower
After every 10 hours operation, clean the air filter by
shaking out thoroughly; replace if damaged or worn.
Check the condition of the fuel filter periodically; if soiled
excessively, discard and fit a replacement.
Clean the cylinder fins regularly, using a brush or
compressed air.
Periodically, clean the spark plug and check the
electrode gap (0.5 mm).
Check the condition of the exhaust silencer; in the case
of the 62 cm3 version, remove the flame-trap mesh from
the silencer after every 30/40 hours operation and clean
off carbon deposits.
Guide to blower selection
For gardeners or home users who need to tidy up flowerbeds, walkways and greenery, the most suitable
machines are handheld blowers with displacements ranging from 25 to 30 cm³.
Backpack blowers, with variable displacements from 30 to 70 cm³, are the better option for clearing
much larger areas whether rural (such as hazel and chestnut groves, farmyards and forecourts) or urban
(parks, stadia, flowerbeds and roads).
Certain models can be converted easily to operate as vacuum cleaners by fitting a special collection
kit, with a blade that chops up vacuumed material to reduce its volume inside the bag. They can also be
equipped with systems that significantly reduce the vibration transmitted to the operator when in use.
12
Handheld blowers
Power
SA 2700
SA 3000
1.2 HP - 0.9 kW
1.3 HP - 1.0 kW
Displacement
Max. air volume
30.5 cm
3
30.5 cm3
3
3
11.6 m /min - 700 m /h
12.0 m /min - 720 m3/h
4.5 Kg
4.5 Kg
Dry weight, without
blower tube
3
SA 3000
5656 2001
5655 2001
36 L
36 L
Collection bag
capacity
Backpack blowers
Power
SA 2700 BP
SA 2062
1.2 HP - 0.9 kW
4.5 HP - 3.3 kW
Displacement
Max. air volume
Dry weight, without
blower tube
30.5 cm
61.3 cm3
3
12 m /min - 700 m /h
20 m /min - 1200 m3/h
6.4 Kg
9.4 Kg
3
3
3
SA 2700 BP
13
The lawn
Looking after the lawn
Fertilization
A lush, green lawn is an object of desire for anyone who
The soil is not an inexhaustible reservoir of nutrients, and
has a garden. In effect, a healthy expanse of turf enhances
will be impoverished further by mowing: fertilizers are
the appearance of open spaces surrounding a home. Like
essential as a means of restoring nutrient substances to
plants and flowers, any lawn requires tending and treating
the soil. It is important to select products specifically for
continuously: and with a little effort, it can be kept in perfect
lawns, enabling a slow release of nitrogen and preferably
shape, year in and year out. So here is a quick guide to the
mineral-organic in formulation. The lawn should be fertilized
more important jobs that need doing through the course of
regularly all the year round, except in winter, selecting the
the year to ensure proper upkeep of the lawn.
products best suited to each respective period. Always
keep to the dosages indicated, and be careful to spread the
Mowing
Cutting the grass is not just an enjoyable pastime. It is also
an operation absolutely essential to the health of the lawn:
product uniformly.
Controlling weeds and moss
mowing must be done at the right time, in the proper way
Weeds not only degrade the appearance of a lawn, they
and using suitable equipment. It is important to remember
also cause damage. The remedies to adopt will depend on
that mowing – which should wait until the winter is definitely
the type of weeds: having identified the problem, consult a
over – must be done frequently, to favour new growth:
specialist, who will be able to indicate the weedkillers best
every 10-15 days at first, then once a week or thereabouts
able to combat the situation. Moss grows on damp soils,
(right through the summer). For ornamental lawns, the height
wherever moisture tends to linger. The ideal solution would
of the grass should be, on average, about 3 cm in spring and
be to prevent its growth by digging and working peat or
autumn and 5 cm in summer.
silver sand into the soil before seeding, to create a soft and
permeable bed. Where moss has taken hold, on the other
Watering
It is important that the turf receives the right amount of
moisture at all times during the year, as dictated by the
weather conditions and the nature of the soil.
14
hand, the soil needs to be treated with suitable products,
such as ferrous sulphate; having removed the dead moss,
make holes in the soil, spread sand and peat, and apply a
complex fertilizer to revive the turf.
Lawnmower, brushcutter
or garden tractor?
There are three types of equipment offering a complete
solution to the various needs encountered in the care
of a lawn. In fact, the ability of the turf to flourish will
depend not least on the machine used to cut the grass.
In practice, the use of the right appliance will make
work in the garden more relaxing and pleasurable
and bring better results. Here, we look at the best way
to go about making a choice.
The brushcutter
Mulching
In addition to the benefits for the lawn, mulching
helps solve the problem of how to dispose of
grass clippings, as these are simply chopped up
finely and spread over the turf.
An essential item, on any surface near obstructions
What is mulching?
(low walls, fences, steps, etc.), or where the ground is
In the case of lawns, this is a technique whereby
uneven or on a steep gradient.
the grass clippings from mowing are used as
This machine is used to cut grass, weeds, brush and
nutrient for the turf. Thanks to the use of a special
scrub in areas not accessible with other machines.
blade and a plug that closes off the discharge
Certain brushcutters, when fitted with particular
duct, grass clippings continue to circulate
accessories, can also be used for pruning high and
beneath the mower deck when cut. The particles
low growth on trees and orchard plants, for clipping
are chopped finer and finer, and spread uniformly
medium-high hedges and for cultivating small
over the lawn, decomposing ultimately and
vegetable plots.
acting as a natural fertilizer.
With mulching, the lawn benefits from an
The lawnmower
Lawnmowers are adaptable to different types of
surface. Simply select the most suitable type from the
models available: models for hobbyists (small lawns,
invaluable application of organic and
nutritional substances – also of moisture, to
prevent it from drying out – and, last but not least,
there are no waste disposal problems.
gardens), and models for professionals, indispensable
when working large areas and on irregular lawns
with depressions or ridges. Some models are selfpropelling, which makes for greater operator comfort
when mowing large expanses, and working on slopes
or slightly uneven soils.
If the lawnmower is equipped with a mulching kit, the
need to dispose of clippings is largely eliminated,
since these are finely fragmented and strewn on the
turf, retaining moisture and essential nutrients.
The garden tractor
These offer the ideal solution for large gardens, and
for parkland and public green spaces. Sturdily built
and easy to handle, machines of this type have a
small turning circle to simplify manoeuvres in amongst
plants and shrubs. They generally have a side or rear
outlet duct for connection to a grass catcher. Like
lawnmowers, certain models of garden tractor can
be converted by means of a simple kit to operate in
mulching mode.
15
Multimate combined system
16
Multimate is the all-in-one tool that
makes gardening 7 times more
efficient. At its centre is one big
heart: a compact, lightweight and
quiet engine which can power up
to 7 different implements. Ideal for
keen gardeners with diverse needs:
finishing the lawn edges and
around walls and fences, pruning
trees and hedges, trimming bushes,
and blowing away leaves and
debris. No matter what the needs of
the private user, one big heart takes
care of them all.
The all-in-one tool for your garden: it offers all the
implements you need to look after every inch of your garden.
Simple changeover action: just press a button and rotate to
switch between the 7 implements supplied with Multimate.
A single engine body, quiet yet powerful: lightweight,
quiet and incorporating an ergonomic handgrip, with all
controls at your fingertips for maximum comfort.
7 machines for the price of one – invaluable.
Minimal space requirements: Multimate takes up
minimal room and is also supplied with a special
implement storage kit.
Multimate - Quick-fit lock-release system
Multimate is based on a highly intuitive lock-release system which is so user-friendly and safe that it can be operated
by even the least expert users.
Multimate features the patented “Rev&Go” system, a quick-fit mechanism which enables the operator to switch from one
implement to another within seconds and without the need for tools: simply insert an implement and rotate to attach it, or
press a button and rotate to release it.
From one implement to the next in just 5 seconds
Attachment procedure
Silver
Medal
Innovation
Demopark
(Germany)
for
at
2009
Release procedure
Multimate - Engine unit
Quiet, powerful and eco-friendly, the single 2-stroke engine features an innovative 3-spring anti-vibration system which completely
isolates it from the handgrip: this is the revolutionary heart of Multimate!
Engine
30 cm3 EURO 2
Engine
30 cm3 EURO 2
Power
1.0 HP
Primer
for introducing fuel into the carburettor and guaranteeing
simple starting every time
Filter
foam air filter which guarantees an optimum
filtering action and long cleaning intervals
Digital coil
Anti-vibration system
to reduce effort during start-up and limit fuel consumption
with 3 springs
Fuel tank capacity
0.37 L
Implement fitting
2 positions (0° and 90°)
Weight
3.9 Kg
17
Multimate – Brushcutter
The ideal tool for cutting grass, weeds, bushes and shrubs in areas not accessible with other machines. Essential both for
cleaning and tidying private premises, and for clearing areas overgrown with untended vegetation.
Shaft arm tube
Ø 22 mm (internal drive shaft Ø 6 mm)
Shaft arm tube
Ø 22 mm (internal drive shaft Ø 6 mm)
Cutting components
Ø 109 Tap'n Go head, 2.0 mm line
Weight
2.3 Kg
Multimate – Trimmer
The perfect implement for tending to less accessible corners of the garden, even those with obstacles.
Shaft arm tube
Ø 22 mm (internal drive shaft Ø 6 mm)
Shaft arm tube
Ø 22 mm (internal drive shaft Ø 6 mm)
Cutting components
Ø 105 Tap'n Go head, 2.0 mm line
Weight
1.9 Kg
Multimate - Lawn Edger
Practical and lightweight implement designed for trimming and tidying lawn edges along paths and flower beds; the vertical
cutting action enables it to accurately follow the contours of the lawn, tidying borders that other machines such as brushcutters
and lawnmowers are unable to reach.
Shaft
Ø 22 mm (internal drive shaft Ø 6 mm)
Cutting components
blade Ø 8”/200 mm, thickness 2 mm
Blade guard
Depth of cut
plastic
50 mm
Wheel
plastic (Ø 135 mm)
Weight
2.8 Kg
Multimate – Blower
Practical and manoeuvrable, this implement is ideal for trouble-free removal of leaves, shrubs and garden debris. Particular
attention paid to enhancing the comfort of the end user.
Air flow rate
Air flow rate
Air speed
18
600 m3/h
600 m3/h
60 m/s
Handle
swivelling
Weight
1.6 Kg
Multimate – Hedgetrimmer
The 1.1 metre shaft enables the operator to trim hedges up to 3 metres high, without the use of a ladder. Twelve different blade
settings.
Gearbox
in aluminium
Cutting action
reciprocating
Blade length
510 mm
Cutting width
25 mm
Machine overall length
2.0 m
Blades
adjustable through 12
positions from 0 to 135°
Blade pitch
30 mm
Weight
2.6 Kg
Multimate – Pruner
For pruning all kinds of tree branches and foliage up to three metres from the ground, to keep growth under control.
Shaft arm length
Machine overall length
Bar length
Chain
1.5 m
1.9 m
10” (250 mm)
Oregon 3/8” x .043”
Chain thickness
1.1 mm
Oil reservoir capacity
0.165 L
Weight
2.4 Kg
Multimate - Tiller
Versatile implement which can be used for preparing soil for grass seeding, as well as digging furrows for planting flowers, shrubs
and vegetables. Its versatility means that it can also be used for turf scarification.
Rotor
Rotor guard
Gearbox
Transmission
2+2 blades - 30 cm
plastic
1 forward speed
in aluminium
Handlebars
folding
Weight
9.4 Kg
19
Brushcutters
Essential both for cleaning and
tidying private premises, and
for clearing areas overgrown
with untended vegetation.
This is a family of products
characterized by
top-of-the-range performance
and supreme operator comfort,
not to mention maximum care for
the environment guaranteed by
new engines producing
low emissions.
Inspect the fuel filter periodically, replace if damaged or
excessively soiled.
Clean the cylinder fins by brushing, or blasting with
compressed air.
Clean the spark plug periodically and check the
electrode gap.
Check the grease level on the bevel drive after every 30
hours of use.
Grease the end of the flexible pipe after every 20 hours
Proper maintenance of brushcutter
of use, and the joint of the rigid pipe (backpack models)
after every 100 hours.
Clean the machine and the cutter assembly at the end of
Clean the air filter after every 8-10 hours of operation,
replace if excessively soiled or damaged.
every job.
Sharpen the blade periodically.
Guide to brushcutter or trimmer selection
The best machines for relatively small areas are electric trimmers. Generally rated between 500 and
1000 Watt, they are ideal for trimming jobs on small, level areas with obstacles.
On more or less level surfaces near obstructions, brushcutters are the better option. For grass
cutting and trimming jobs, a brushcutter of between 25 and 40 cm³ displacement will be enough; more
demanding tasks on uneven ground should be performed using more powerful brushcutters of between
40 and 60 cm³ displacement.
For performing jobs on surfaces with particularly accentuated height differences, or among reeds and
thicker undergrowth, or if conditions are rendered generally more difficult by obstacles, sloping ground or
the intensity of use, backpack models of 40 and 60 cm³ displacement are preferable.
20
Electric trimmers
8091
8061
8091
8100
Power
600 W
850 W
1000 W
Grip
single
single
single
Weight
3.2 Kg
3.5 Kg
4.5 Kg
STARK universal brushcutters for home use
STARK 25 TR
STARK 25
STARK 2500 TR
STARK 2500 S
STARK 2500 T
1.0 HP - 0.8 kW
1.0 HP - 0.8 kW
1.0 HP - 0.8 kW
25.4 cm3
25.4 cm3
25.4 cm3
Grip
single
single
handlebar
Weight
4.5 Kg
5.6 Kg
6.2 Kg
Power
Displacement
STARK 25 model available only in certain markets.
STARK 2500 S
STARK brushcutters for intensive use
STARK 38
Power
STARK 3800 S
STARK 3800 S
STARK 3800 T
1.8 HP - 1.3 kW
1.8 HP - 1.3 kW
36.2 cm
36.2 cm3
Grip
single
handlebar
Weight
6.8 Kg
7.3 Kg
Displacement
3
STARK 38 model available only in certain markets.
21
STARK “Heavy Duty” brushcutters for intensive use
STARK 44
STARK 42 BP
STARK 4400 S
STARK 4400 T
2.1 HP - 1.6 kW
2.1 HP - 1.6 kW
2.1 HP - 1.6 kW
40.2 cm3
40.2 cm3
40.2 cm3
Grip
single
handlebar
single
Weight
6.9 Kg
7.4 Kg
9.5 Kg
Power
Displacement
STARK 44 model available only in certain markets.
STARK 4400 S
PREMIUM universal brushcutters for home use
DS 2200 T
Power
Displacement
DS 220 S
DS 220 T
DS 240 S
DS 240 T
DS 2200 S
DS 2200 T
DS 2400 S
DS 2400 T
1.1 HP - 0.8 kW
1.1 HP - 0.8 kW
1.2 HP - 0.9 kW
1.2 HP - 0.9 kW
21.7 cm
3
3
21.7 cm
21.7 cm
21.7 cm3
Grip
single
handlebar
single
handlebar
Weight
4.2 Kg
4.8 Kg
4.5 Kg
5.2 Kg
models DS 220, DS 240 available in certain markets only.
22
3
PREMIUM “Split Shaft” universal brushcutters for home use
DS 2400 D
Power
Displacement
1.2 HP - 0.9 kW
21.7 cm3
Grip
single
Weight
5.1 Kg
* drive unit available separately from brushcutter on request.
Hedgetrimmers
Pruner
Blower
Shaft extension
PREMIUM universal brushcutters for intensive home use
DS 2800 S
DS 2800 T
1.3 HP - 1.0 kW
1.3 HP - 1.0 kW
27 cm3
27 cm3
Grip
single
handlebar
Weight
5.5 Kg
6.0 Kg
Power
DS 2800 S
Displacement
23
PREMIUM brushcutters for intensive use
DS 3200 S
DS 3200 T
DS 3500 S
DS 3500 T
1.5 HP - 1.1 kW
1.5 HP - 1.1 kW
1.9 HP - 1.4 kW
1.9 HP - 1.4 kW
30 cm3
30 cm3
36.3 cm3
36.3 cm3
Grip
single
handlebar
single
handlebar
Weight
5.8 Kg
6.3 Kg
6.9 Kg
7.6 Kg
Power
Displacement
DS 3500 T
PREMIUM professional brushcutters
DS 4300 S
DS 4300 S
DS 4300 TL
2.5 HP - 1.83 kW
2.5 HP - 1.83 kW
44 cm³
44 cm³
Grip
single
handlebar
Weight
7.7 Kg
8.5 Kg
Power
Displacement
8530 IC
8460 IC
8460
8530 IC
8530
8550 BOSS
2.5 HP - 1.8 kW
2.5 HP - 1.8 kW
2.8 HP - 2.1 kW
2.8 HP - 2.1 kW
2.8 HP - 2.1 kW
45.7 cm3
45.7 cm3
52.5 cm3
52.5 cm3
52.5 cm3
Grip
single
handlebar
single
handlebar
handlebar
Weight
7.5 Kg
8.1 Kg
7.4 Kg
8.2 Kg
8.5 Kg
Power
Displacement
24
PREMIUM professional backpack brushcutters
DSF 4300
Power
Displacement
DSF 4300
8465 ERGO
8535 ERGO
2.5 HP - 1.83 kW
2.5 HP - 1.8 kW
2.8 HP - 2.1 kW
44 cm3
45.7 cm3
52.5 cm3
Grip
single
single
single
Weight
9.4 Kg
10.8 Kg
11.0 Kg
Brushcutters with 4-stroke engine
DS 3600 4S
DS 3600 4T
35.8 cm3
35.8 cm3
Grip
single
handlebar
Weight
6.7 Kg
7.0 Kg
Displacement
DS 3600 4S
Additional tools for brushcutters
EP 90
EH 24 - EH 25
EP 100
EH 48 - EH 50 - EHD 50
EP 120
CULTIVATOR
25
Battery-powered products
A range of products for users
seeking lightweight and
practical tools. These tools
are particularly suitable for less
expert users as they do not
call for complicated fuel mixing
procedures or management of
power cables: use of the same
battery for both the lawnmower
and chainsaw makes for simple
and intuitive use of this tool.
With low noise operation and
zero exhaust emissions these
power tools are eco-friendly and
respectful of the surrounding
environment.
Proper maintenance of battery-powered
chainsaw
Check the chain brake lever and replace it if necessary
(chainsaw).
Ensure the battery compartment is clean. Make sure
the compartment is free of obstructions before fitting the
battery.
Check the chain oil level and ensure the reservoir is full.
Check correct chain tensioning and secure fastening of
the guide bar to the tool body.
Proper maintenance of battery-powered
lawnmower
Periodically check the blade to ensure it is sharp.
Ensure the battery compartment is clean. Make sure
the compartment is free of obstructions before fitting the
battery.
Guide for battery-powered products selection
Battery-powered products are the ideal solution for places that require compliance with specific noise
limits: the modern brushless motor combined with a powerful 36 V 2.6 Ah battery means top-of-category
ranking in terms of performance and noise levels.
The tools are easy to use: just check the battery charge with the easy-read battery check (located on the
battery) and start working without any form of restriction - the perfect choice for users with no experience
of petrol engine tools.
They are especially for jobs that must be done far from the nearest power point or in areas where the
presence of loose power cables would be hazardous.
Products in the new range can be purchased together or separately, with the battery and battery charger.
The entire range of Efco battery-powered products are compatible with the BA 2.6 Ah battery.
26
Battery-powered chainsaw for home use
MT 2200 Li-Ion
Battery
Li-Ion (2.6 Ah/36 V)
Charging time
90 min
Motor type
Brushless
No load motor speed
4600 rpm
Chain (pitch x gauge)
3/8'' x .050''
Bar length
30 cm
Chain speed
Number of cuts with fully-charged battery
8 m/s
90 cuts (10 cm diameter, soft wood)
Oiler
automatic/zero oil flow
with motor stopped
Oil reservoir capacity
0.10 L
Weight without battery with bar and chain
4.5 Kg
Battery-powered lawnmower for home use
LR 38 P Li-Ion
Battery
Charging time
No load blade speed
Deck
Motor type
Cutting width
Propulsion
Li-Ion (2.6 Ah/36 V)
90 min
3500 rpm
ABS
Brushless
38 cm
push-type
Cutting height
20 – 70 mm
No. of settings
6 levels
Grass catcher capacity
Wheels diameter
Weight without battery
35 L
150/210 mm
15 Kg
Battery BA 2,6 Ah
Combined with the BTC 36V battery charger to create the perfect power source for your
battery-powered tool.
The incredible power output places this unit at the top of the class on-board lithium ion batteries.
It’s rugged – in the event of accidental dropping the sturdy outer casing protects the lithium ion cells inside.
The charge monitoring system (based on LEDs) means residual charge can be assessed at a glance so the
job can be organised more efficiently.
Minimum memory effect so the battery can be recharged hundreds of times with no loss of performance.
Battery charger BTC 36V
Designed to keep the BA 2,6 Ah battery in good working order and fully charged. The advance electronics
make it possible to charge the battery safely, maximising its working life with minimal power consumption.
The rugged ABS case protects the battery from accidental impact.
27
Lawnmowers
An extensive range of lawn care
solutions. Small gardens or large
parks; machines for occasional
users and for professional
contractors and groundsmen.
All models are designed taking
account of their typical operating
environment, and of customer
preferences with regard to use
and maintenance.
A wide and diversified offering
able to meet a variety of
needs with innovative and
hi-tech solutions.
Proper maintenance of lawnmower
Periodically, check the oil level and the fuel level (models
with petrol engine).
Make certain that the cutting area (under the deck), the
grass catcher, and the machine in general, are cleaned
regularly and thoroughly.
Check the sharpness of the blade periodically.
Inspect and clean the air filter periodically.
Check the engine oil periodically and renew if necessary,
inspect the drive belts and pulley of the transmission
system, clean the variable speed unit thoroughly, and
inspect the wheel bearings, lubricating if necessary.
Guide to lawnmower selection
For gardens spanning up to 900 m², the best option is an electric lawnmower, with plastic or steel deck.
Equipped with an electric motor, these machines are ideal due to their compact size and manoeuvrability,
with a cutting width that generally ranges between 30 and 50 cm.
For larger expanses of up to 2000 m², models with cutting width of 40 to 55 cm are more suitable.
Comprising a robust structure with steel deck, they are available in the push-type and self-propelled
versions. For areas exceeding 1200 m² the best option is a self-propelled model, which will reduce the
effort needed when working on uneven or sloping ground.
The ideal machines for big gardens (between 2000 and 2600 m²) are self-propelled professional
models. Offering a cutting width of 40 to 55 cm, they combine the advantages of tough construction
materials (aluminium deck) with dependable performance, in terms of optimum work rate and shorter job
times.
28
300-550 m2
Electric lawnmowers with plastic deck
PR 35 S
PR 40 S
Deck
ABS
ABS
Power
1.1 kW
1.3 kW
Cutting width
33 cm
38 cm
Propulsion
push
push
Grass box capacity
25 L
40 L
PR 40 S
ESSENTIAL electric lawnmowers with steel deck
600-800 m2
LR 44 PE
LR 48 PE
Deck
steel
steel
Power
1.5 kW
1.6 kW
Cutting width
41 cm
46 cm
Propulsion
push
push
Grass box capacity
60 L
60 L
LR 48 PE
29
ESSENTIAL push-type lawnmowers with steel deck
LR 44 PK
Deck
Displacement
Engine make/model
LR 44 P
800-1400 m2
LR 48 PK
steel
steel
steel
140 cm3
125 cm3
140 cm3
Emak K 500 OHV
B&S 450 E series
Emak K 500 OHV
Cutting width
41 cm
41 cm
46 cm
Propulsion
push
push
push
Grass box capacity
60 L
60 L
60 L
LR 48 PK
ESSENTIAL self-propelled lawnmowers with steel deck
1000-1800 m2
LR 44 TK
Deck
Displacement
Engine make/model
Cutting width
LR 48 TK
30
LR 48 TK
steel
steel
140 cm3
140 cm3
Emak K 500 OHV
Emak K 600 OHV
41 cm
46 cm
Propulsion (speed)
self-propelled (3.6 Km/h)
self-propelled (3.6 Km/h)
Grass box capacity
60 L
60 L
COMFORT PLUS push-type lawnmowers with steel deck
LR 44 PK
COMFORT PLUS
Deck
Displacement
Engine make/model
800-1400 m2
LR 44 PB
COMFORT PLUS
LR 48 PK
COMFORT PLUS
LR 48 PBQ
COMFORT PLUS
steel
steel
steel
steel
140 cm3
125 cm3
140 cm3
140 cm3
Emak K 500 OHV
B&S 450 E series
Emak K 500 OHV
B&S 550 E series
Cutting width
41 cm
41 cm
46 cm
46 cm
Propulsion
push
push
push
push
Grass box capacity
70 L
70 L
70 L
70 L
LR 48 PK COMFORT PLUS
COMFORT PLUS self-propelled lawnmowers with steel deck
LR 48 TBQ
COMFORT PLUS
LR 48 TBX COMFORT PLUS
Deck
1400-2000 m2
LR 48 TBX
COMFORT PLUS
LR 53 TBX
COMFORT PLUS
steel
steel
steel
140 cm3
190 cm3
190 cm3
B&S 550 E series
B&S 625 series
B&S 625 series
46 cm
46 cm
51 cm
Propulsion (speed)
self-propelled (3.6 Km/h)
self-propelled (3.6 Km/h)
self-propelled (3.6 Km/h)
Grass box capacity
70 L
70 L
70 L
Displacement
Engine make/model
Cutting width
31
1400-2000 m2
ALLROAD PLUS 4 self-propelled lawnmowers with steel deck
LR 48 TK
ALLROAD PLUS 4
LR 48 TBR
ALLROAD PLUS 4
LR 53 TBX ALLROAD PLUS 4
Deck
Displacement
Engine make/model
Cutting width
LR 53 TBX
ALLROAD PLUS 4
Deck
steel
steel
159 cm3
140 cm3
Emak K 650 OHV
B&S 575 EX series
46 cm
46 cm
Propulsion (speed)
self-propelled
(3.6 Km/h)
self-propelled
(3.6 Km/h)
Grass box capacity
70 L
70 L
LR 53 THX
ALLROAD PLUS 4
LR 53 VBD
ALLROAD PLUS 4
LR 53 TK
ALLROAD PLUS 4
steel
steel
steel
steel
190 cm3
196 cm3
160 cm3
160 cm3
B&S 625 series
Emak K 800 OHV
Honda GCV 160
B&S 750 series
51 cm
51 cm
51 cm
51 cm
Propulsion (speed)
self-propelled (3.6 Km/h)
self-propelled (3.6 Km/h)
self-propelled (3.6 Km/h)
self-propelled, variable
speed drive
(from 2.5 to 4.5 Km/h)
Grass box capacity
70 L
70 L
70 L
70 L
Displacement
Engine make/model
Cutting width
1400-2000 m2
ALLROAD EXA 4 self-propelled lawnmowers with steel deck
LR 48 TBX
ALLROAD EXA 4
Deck
Displacement
Engine make/model
Cutting width
LR 53 TK ALLROAD EXA 4
steel
steel
190 cm³
159 cm³
B&S 625 series
Emak K 650 OHV
46 cm
46 cm
Propulsion (speed)
self-propelled (3.6 Km/h)
self-propelled (3.6 Km/h)
Grass box capacity
70 L
70 L
LR 53 TK
ALLROAD EXA 4
LR 53 TBX
ALLROAD EXA 4
Deck
Displacement
Engine make/model
steel
steel
196 cm³
190 cm³
Emak K 800 OHV
B&S 650 series
51 cm
51 cm
Propulsion (speed)
self-propelled (3.6 Km/h)
self-propelled (3.6 Km/h)
Grass box capacity
70 L
70 L
Cutting width
32
LR 48 TK
ALLROAD EXA 4
ALLROAD ALUMINIUM self-propelled lawnmowers with aluminium deck
2000-2400 m2
AR 53 TBX
ALLROAD ALUMINIUM
Deck
Displacement
Engine make/model
Cutting width
AR 48 TK
ALLROAD
ALUMINIUM
AR 48 TBX
ALLROAD
ALUMINIUM
aluminium
aluminium
159 cm3
190 cm3
Emak K 650 OHV
B&S 650 series
46 cm
46 cm
Propulsion (speed)
self-propelled
(3.6 Km/h)
self-propelled
(3.6 Km/h)
Grass box capacity
80 L
80 L
AR 53 TK
ALLROAD
ALUMINIUM
AR 53 TBX
ALLROAD
ALUMINIUM
AR 53 VBD
ALLROAD
ALUMINIUM
AR 53 THX
ALLROAD
ALUMINIUM
aluminium
aluminium
aluminium
aluminium
196 cm3
190 cm3
160 cm3
160 cm3
Emak K 800 OHV
B&S 675 series
B&S 750 series
Honda GCV 160
51 cm
51 cm
51 cm
51 cm
Propulsion (speed)
self-propelled
(3.6 Km/h)
self-propelled
(3.6 Km/h)
self-propelled, variable speed
drive (from 2.5 to 4.5 Km/h)
self-propelled
(3.6 Km/h)
Grass box capacity
80 L
80 L
80 L
80 L
Deck
Displacement
Engine make/model
Cutting width
2300-2600 m2
MR 55 professional lawnmowers with aluminium deck
Deck
Displacement
Engine make/model
Cutting width
MR 55 TBD
MR 55 TBI
MR 55 HXF
aluminium
aluminium
aluminium
160 cm3
190 cm3
163 cm3
B&S 750 series
B&S 850 series
Honda GXV 160
53 cm
53 cm
53 cm
Propulsion (speed)
self-propelled
(3.6 Km/h)
3 speeds
3 speeds
Grass box capacity
80 L
80 L
80 L
MR 55 TBI
33
Robotmowers
Robotmowers are an innovative lawn
care solution that dispense with the
need to cut the grass, leaving the
lawn constantly perfectly manicured
while also dispensing with the need to
dispose of grass cuttings. Completely
independent operation: when the
robotmowers need to recharge they
return automatically to the charging
station; power consumption is
negligible, with zero CO2 emissions. No
noise disturbance in the garden and
neighbourhood.
Once a week check the blades for damage and sharpen
them every 3-4 weeks. Change the blades every 6 months
or sooner if they show evident signs of deterioration.
Once a week clean the area around the wheels carefully
using a brush or a cloth, and ensure the wheels spin
freely; make sure the front wheels are able to steer without
obstructions.
Inspect the electrical contact surfaces for signs of dirt or
Proper maintenance of robotmower
burns (incorrect charging).
Periodically inspect the contacts on the charging
Clean the robot carefully twice a month with a brush or
station to ensure they are in good condition. The contacts
cloth; use water if necessary for more thorough cleaning.
must be replaced on the charging station and on the robot if
Clean the underside of the deck once a month.
they show evident signs of burning.
Guide to robotmower selection
SIRIUS is the ideal machine for homeowners with lawns of up to 1,200 m² in size. Optimal cutting results are
guaranteed even in the presence of a large number of obstacles and highly irregularly shaped lawn surfaces.
If the lawn has a particularly complex layout we recommend model 1200 which can work simultaneously
with two charging stations, to be installed at opposite ends of the garden.
For larger gardens we recommend model 1200, which offers longer running time before recharging, while
model 700 is the perfect choice for smaller gardens (up to 700 m2) with irregular shaped lawns.
34
A perfect lawn in a few simple steps.
Once-only preparation in a few simple steps:
• Install the charging station
• Install the boundary cable in the lawn using the supplied staples
• Calibrate SIRIUS
• Set the operating times
• SIRIUS is ready for use
Programming, first-time operation:
• Position SIRIUS next to the charging station and switch it on
• Enter the PIN code
• Press the HOME button to test the charging station
(except model 700)
• Start the calibration procedure and set the days and times
of operation
• Switch the rain sensor on or off
(except model 700)
Boundary cut function
Thanks to this function SIRIUS cuts the grass along the
perimeter wire in the preset boundary area. The day and
time of this function can be freely programmed.
Robotmowers for home use
< 700 m2
SIRIUS 700
SIRIUS 1200
Li-Ion (1.5 Ah/ 18 V)
Li-Ion (3 Ah/ 25.2 V)
70 min
120 min
70 min
120 min
Cutting system motor
speed
3,400 rpm
3,400 rpm
Guaranteed sound
power level
65 dB (A)
65 dB (A)
Surface area / max.
gradient
max 700 m² / 35 %
max 1200 m² / 35 %
30 - 60 mm
30 - 60 mm, manual
Battery
Charging time
Operating time
Cutting height
Cutting diameter
Dimensions (length x
width x height)
SIRIUS 1200
< 1200 m2
Weight
28 cm
30 cm
600 x 490 x 245 mm
600 x 490 x 245 mm
7.7 Kg
8.0 Kg
35
Designed for discerning
users, professional
gardeners and groundsmen,
these tools are used in
conjunction with lawnmowers
and are ideal for keeping the
lawn healthy by eliminating
moss and thatch.
Proper maintenance of scarifier
Check the state of the blades before every use, sharpen
or replace as necessary.
Clean the machine immediately after each use.
Empty and clean the collection bag.
Scarifiers
Clean the bottom of the equipment, as well as the roller
or scarifier.
Remove all dirt using a rag or brush.
Do not clean the machine with running water or high
pressure washers.
Guide to scarifier selection
Used for removing thatch and moss from the lawn surface, they are equipped with a robust structure
and powerful engine, to take on even the toughest of terrains. Lawns should be scarified at least twice
a year, as this will aerate the soil and enable moisture, air and nutrients to reach the roots of the grass,
favouring steady and healthy growth.
An important feature to look out for is the height adjustment system with memory, which ensures that
the machine can be set down at the same height when repositioned. Generally available with a cutting
width of between 40 and 50 cm. Models equipped with bearing-mounted wheels ensure excellent
propulsion, whatever the type of surface.
36
< 1000 m2
Scarifier for home use
AG 38 B45
Deck
steel
Displacement
Engine make/model
127 cm³
Briggs & Stratton 550 series
Cutting width
38 cm
Spike
fixed
Wheels
Cutting depth
Overall dimensions
plastic
adjustable with memory
103x59x109 cm
Weight
34 Kg
< 5000 m2
Professional scarifiers
AG 40 S50
Deck
Displacement
Engine make/model
Cutting width
Spike
Wheels
Cutting depth
Overall dimensions
Weight
AG 50 H60
steel
steel
160 cm3
160 cm3
Subaru EP16 OHC
Honda GX 160
40 cm
50 cm
fixed
floating
plastic
metal with bearings
adjustable with memory
adjustable with memory
120x68x90 cm
120x82x102 cm
50 Kg
65 Kg
AG 40 S50
37
Wheeled brushcutters/Flail mowers
A range of products designed
for discerning home users,
produce growers and
landscape maintenance
contractors. Ideal for cutting
down and removing long, thick
grass, they are distinguished by
their extremely robust design,
cutting power and comfortable
operation, which enables the
user to get the job done quickly
and efficiently.
After each use clean the cutter assembly housing and
clear the engine of any residual vegetation.
Regularly check that the cutting blade is sharp, so to
obtain the cleanest possible cut.
Replace the gasket of the blade brake after every 100
Proper maintenance of wheeled
brushcutter/flail mower
hours of use.
Lubricate the bearings, axles, front/rear wheels and
chain after every 25 hours of use.
Before each use ensure that the cooling intake area and
the engine cylinder are free from dirt.
Check the oil level after every 100 hours (minimum).
Sharpen and balance the blade after every 20 hours of use.
Guide to wheeled brushcutter/flail mower selection
Home users can choose from semi-professional models, which are extremely robust but also compact
and easy to handle. Equipped with centralised cutting adjustment, they are ideal for cleaning mediumsized areas infested with weeds, scrub or other types of invasive vegetation.
For more demanding and continuous work, such as that performed by farmers or professional
contractors, a professional model is needed. Equipped with professional blade (wheeled brushcutter)
and professional cutting unit (flail mower), they assure excellent chopping quality, even on dense
undergrowth and medium-sized shrubs.
38
< 5000 m2
Wheeled brushcutters for intensive use
Displacement
Engine make/model
DR 51 S6
DR 51 S6
DR 51 VB6
189 cm3
190 cm3
Subaru EA190 V
B&S 825 OHV series
Cutting width
51 cm
51 cm
Transmission
single speed propulsion
variable speed drive
central
(controlled from handgrip)
central
(controlled from handgrip)
57 Kg
62 Kg
Cutting height adjustment
Weight
< 5000 m2
Professional wheeled brushcutter
DR 52 VBR6
Displacement
Engine make/model
190 cm3
B&S 825 OHV series
Cutting width
52 cm
Transmission
2 forward speeds + 1 reverse
Cutting height adjustment
Weight
flange-operated
82 Kg
< 5000 m2
Professional flail mowers
DR 65 HR 8,5
Displacement
Engine make/model
DR 80 KR 11
DR 80 KR 11
270 cm3
277 cm3
Honda GX 270
Kohler CH 395
Cutting width
65 cm - 38 blades
80 cm - 46 blades
Transmission
3 forward speeds + reverse
3 forward speeds + reverse
centralised (20 - 80 mm)
centralised (20 - 80 mm)
155 Kg
170 Kg
Cutting height adjustment
Weight
39
Garden tractors
Ideal for gardens of all shapes
and sizes, parkland and
public green spaces.
Tough and easy handling,
these are the perfect machines
for anyone interested in
high work rates.
Incorporating the latest solutions
technology has to offer, they give
maximum satisfaction in terms of
comfort and performance, even to
the most demanding of users.
Proper maintenance of garden tractor
After every 25 hours operation, check that the blade is
fastened securely, and sharp.
Every 20 hours, check the adjustment of the propulsion
brake, the state of the drive belts and the condition of
the blade clutch: if worn, contact a service centre.
Make a periodic inspection of all mechanical fastenings
and general lubrication.
Check the level of the oil, replacing after the first 10
hours operation and every 50 hours thereafter.
Inspect the air filter and fuel filter, and replace if clogged
excessively.
Check the pressure of the tyres.
Guide to garden tractor selection
RIDER mowers for small and medium sized gardens (up to 4,000 m2): known as ride-on tractors (engine under driver seat),
rated up to 13 HP. Compact and neatly proportioned, these machines afford ease of manoeuvre in gardens with a high density
of plants, where grass clippings need to be collected. They can be converted to operate in mulching mode. “4-cutting device”
model convertible for side discharge with the deflector provided as standard.
Garden tractors with side discharge (for areas up to 6,000 m²): these are small and compact models with a tight turning
radius, suitable for manoeuvring in confined spaces. They can be converted to operate in mulching mode.
MID-RANGE rear discharge garden tractors (for gardens up to 6,000 m2): these machines feature a modern and functional
design and offer the perfect combination of ruggedness, reliability, mowing performance and high load capacity. Available with
92 and 102 cm cutting widths, all with hydrostatic transmission, electromagnetic mower clutch and mulching function (106
models are equipped as standard with the “Change over” system that allows the loading tunnel to be closed by means of a
practical leaver, switching instantly from pick-up mode to mulching mode).
PREMIUM-RANGE rear-discharge garden tractors (for areas up to 9,000 m2): available with 3 cutting widths (95, 105 and
125 cm), these tractors are designed for the maintenance of large gardens, parks and public open spaces requiring pick-up
operation, and also to meet the needs of demanding private users seeking advanced mowing performance combined with a
truly satisfying driving experience. The machines are equipped with hydrostatic transmission with dual pedal control of speed
and direction, electromagnetic mower clutch and mulching function. Model 125 is equipped as standard with electrically
operated grass catcher discharge (available as an option on the other models) for even greater user comfort.
Professional all-terrain garden tractors (for areas up to 10,000 m²): with 92 and 110 cm cutting attachment, designed for
clearing and tidying areas overgrown with thick vegetation, on uneven terrain and on sloping ground where there is no need for
clippings to be collected. With hydrostatic transmission, which allows the operator to control direction and speed by means
of a single pedal, and with self-locking differential.
40
RIDER mowers for small and medium-sized gardens
Displacement
Engine make/model
Cutting width
Propulsion
Bag Capacity
ZEPHYR 72/12,5 K H
ZEPHYR 72/13 H
414 cm3
344 cm3
Emak K 1250 AVD
B&S Powerbuilt 3130 AVS series
72 cm
72 cm
hydrostatic
hydrostatic
180 L
180 L
< 4000 m2
ZEPHYR 72/13 H
Side-discharge garden tractors
3000-6000 m2
Displacement
EF 108 L/18,5 H
Engine make/model
Cutting width
Propulsion
Weight
EF 98 L/14,5 K H
EF 108 L/18,5 H
432 cm3
500 cm3
Emak K 1450 AVD
B&S Powerbuilt 4185 AVS series
98 cm
108 cm
hydrostatic
hydrostatic
160 Kg
171 Kg
41
4000-6000 m2
MID-RANGE rear discharge garden tractors
Displacement
Engine make/model
EF 84/14,5 K H
EF 92/13,5 H
EF 92/16 K H
432 cm3
344 cm3
452 cm3
Emak K 1450 AVD
B&S Intek 3130 AVS series
Emak K 1600 AVD
84 cm
92 cm
92 cm
hydrostatic
hydrostatic
hydrostatic
240 L
300 L
300 L
EF 106/16 K H
EF 106/17,5 H
452 cm3
500 cm3
Emak K 1600 AVD
B&S Intek 4175 AVS series
Cutting width
Propulsion
Bag capacity
EF 106/17,5 H
Displacement
Engine make/model
Cutting width
Propulsion
Bag capacity
102 cm
102 cm
hydrostatic
hydrostatic
320 L
320 L
PREMIUM-RANGE rear discharge garden tractors
EF 95/15,5 H
EF 95/16 K H
EF 95/16 H
500 cm3
452 cm3
656 cm3
B&S Intek 4155 OHV series
Emak K 1600 AVD
B&S V-Twin Intek 7160 OHV series
95 cm
95 cm
95 cm
hydrostatic
hydrostatic
hydrostatic
310 L
310 L
310 L
EF 105/16 K H
EF 105/18,5 H
EF 105/20 H
FE 125/23 H
452 cm3
500 cm3
656 cm3
724 cm3
Emak K 1600 AVD
B&S Intek 4185 OHV series
105 cm
105 cm
105 cm
125 cm
hydrostatic
hydrostatic
hydrostatic
hydrostatic
310 L
310 L
310 L
310 L
Displacement
Engine make/model
Cutting width
Propulsion
Bag capacity
Displacement
Engine make/model
Cutting width
Propulsion
Bag capacity
4000-9000 m2
EF 125/23 H
42
B&S V-Twin Intek 7200 OHV series B&S V-Twin Intek 8230 OHV series
< 10000 m2
Professional all-terrain garden tractors
Displacement
Engine make/model
TONKAWA 110 4x4
TUAREG 92 EVO
TUAREG 92 EVO 4x4
TONKAWA 110 4x4
570 cm3
627 cm3
627 cm3
B&S Vanguard V-Twin
B&S Vanguard V-Twin
B&S Vanguard V-Twin
Cutting width
92 cm
92 cm
110 cm
Cutting height
50-60-75-90 cm
50-60-70-80-100 cm
40-120 cm
hydrostatic
self-locking differential
hydrostatic 4 WD
self-locking differential
hydrostatic 4 WD
self-locking differential
Propulsion
43
Protection of plants, hedges and lawns
44
Watering of plants, hedges and lawns
Every kind of home and professional irrigation requirement,
Proper, regular watering is a fundamental aspect of looking
be met confidently with self-priming and centrifugal water
after plants and greenery. During spring and summer, in
particular, plants, hedges and lawns need a supply of water
sufficient, and carefully gauged, to ensure that the roots
do not dry out and the growth will remain green and lush.
from private gardens to small-medium crop cultivation, can
pumps: these machines are lightweight and easy to handle,
yet tough and reliable over time, available in a range of
displacements and with different types of engine, offering
maximum flexibility under any conditions and guaranteeing
In the case of lawns, especially, water should be distributed
optimum efficiency even with long suction runs.
uniformly and rained in fine droplets. If newly seeded, the
In the case of plants and hedges, in particular, it is best that
lawn needs to be kept moist on the surface, and should
therefore be sprinkled 2-3 times a day with moderate
amounts of water.
As the grass begins to grow, it will need to be watered more
abundantly and less often, so that the water can penetrate
well down into the soil. A mature lawn – well into spring,
especially during dry spells – can be well watered every 4
or 5 days. The best time to water is undoubtedly in the early
morning, as the soil cools down during the night and early
watering will avoid thermal shock; also because when the
sun is high, moisture will evaporate too quickly. When the
lawn is particularly dry, it is advisable to water sparingly at
first, and then increase the amount by stages.
the water used should never be too cold: sprayers or lances
are ideal for delivering atomized water at the most suitable
temperatures.
Protection of plants, hedges and lawns
The preservation of green areas is a major concern,
especially in the urban context: indeed plants play a role
of fundamental importance not only from the health and
hygiene standpoint, as the optimum antidote to pollution,
The essential purpose of these machines is to atomize the
active chemical in solution with water, and spray it at the
vegetation being treated. They can spread liquids (such
as fungicides and pesticides) or powders formulated to
safeguard the health and growth of the vegetation.
but also because of the recreational, cultural, social and
In connection with this family of machines, mention should
aesthetic needs they are able to satisfy.
be made of the technological progress made in recent
Besides needing water, all plants, hedges and lawns must
be fed with other substances that are essential if they are
to prosper. Treatments and disinfestations of green areas
– including crops, small plantations and greenhouses –
years as regards their general specifications and materials,
the adaptation of their performance to the needs of
particular tasks, and in the areas of safety, health and
hygiene.
are carried out generally with the aid of mistblowers and
As a general rule, finally, it should be remembered that
sprayers.
these types of treatment are best done when conditions are
cooler, avoiding the middle part of the day. Also, to ensure
that treatment products are used effectively and to avoid
releasing excessive amounts into the environment, spraying
or dusting operations should not be undertaken in windy or
rainy conditions.
45
Routine maintenance of self-priming/non self-priming
water pumps
strainer version) with petrol, dry off and refit; for versions
with foam or cloth air filter, shake the element out thoroughly
and blow clean with compressed air. Replace if damaged.
Periodically, check the condition of the fuel filter; on
versions with float-type carburettor, the filter is located on
the carburettor fuel line fitting and should be cleaned with
Guide to water pump selection
petrol. For versions with diaphragm carburettor, replace the
filter if dirty.
Total head H (m)
Clean the spark plug periodically and check the electrode
gap (0.5 mm); on 4-stroke versions, check the level of
the oil after every 10 hours operation and renew after
50 hours.
Flow rate Q (l/min)
Major servicing
Every 300 hours, check the suction/discharge balance.
Total head H (m)
Total length of pipeline
Ø 40mm
At least once a year, inspect the diaphragms of the highpressure pump and replace if necessary.
Renew the oil and check the tightness of the bolts
securing the pump assembly.
Flow rate Q (l/min)
Total length of pipeline
Ø 40mm
Total head H (m)
46
Proper maintenance of water pump
After every 10 hours operation, clean the air filter (metal
Total length of pipeline
Ø 25mm
Water pumps
A complete range of self-priming
and centrifugal water pumps,
suitable for every kind of home
and professional irrigation
requirement, as well as building
and deflooding services.
Lightweight and easy to handle,
yet tough and dependable, these
are pumps with a high head-to-flow
ratio, offering maximum flexibility
under any conditions,
and optimum efficiency even
with long suction runs.
Flow rate Q (l/min)
46 46
Self-priming water pumps
MP 3000
Power
Displacement
MP 3000
PA 1050
1.3 HP - 1.0 kW
2.1 HP - 1.6 kW
30 cm3
50.2 cm3
Max. flow rate/Max. head
150 L/min/36 m
270 L/min/30 m
Suction Ø/Delivery Ø/Suction head
1”/25.4 mm/7 m
1.5”/38.1 mm/7.3 m
centrifugal
centrifugal
5.5 Kg
8.5 Kg
Pump type
Total dry weight
Non self-priming water pump
PC 1050
Power
Displacement
Max. flow rate/Max. head
Suction Ø/Delivery Ø/Suction head
Pump type
Total dry weight
2.1 HP - 1.6 kW
50.2 cm3
320 L/min/30 m
1.50”/38.1 mm/7.3 m
centrifugal
6.5 Kg
47
Mistblowers
Designed to give users
maximum convenience,
long uninterrupted spells of
operation and high efficiency.
Innovative technological design
solutions guarantee intensive and
uniform treatments, effected in rapid
time and with maximum practicality.
A must for any grower intent
on keeping a greenhouse, field
crop or plantation perfectly
healthy all year round.
Clean the cylinder fins periodically, removing dirt and
debris with a brush and compressed air.
Proper maintenance of mistblower
Periodically, inspect the air filter, and replace if damaged;
inspect the fuel filter, and replace if dirty.
Check the spark plug periodically and check the electrode
gap (0.5 mm).
Remove the flame-trap mesh from the exhaust silencer
once a week, and clean off carbon deposits.
Inspect the liquids filter, wash in clean detergent and dry
off; clean the ULV filter by blowing compressed air through
the six orifices.
When using a mistblower to deliver notably aggressive
Clean the fan cowl periodically, freeing the grill of dirt and
debris.
chemicals, check and/or replace the seals.
Clean the equipment thoroughly after each treatment.
Guide to mistblower selection
Designed for use in the garden or in smallholdings, these are machines for the discerning user, keen to
benefit from the latest technological solutions.
Driven by powerful and reliable engines of around 60-70 cm3 displacements, they offer users maximum
convenience, long uninterrupted spells of operation, and high efficiency.
Backpack design reduces carrying weight to render the task of the operator that much easier.
Mistblowers come with 2-stroke engines in various sizes depending on the type of use intended.
They incorporate a booster pump – ensuring a longer throw of sprayed liquids to give better results on
taller vegetation – and a ULV kit that optimizes the delivery of sprayed liquids to prevent waste.
Standard features include easily accessible controls and capacious tanks.
Other particularly useful accessories are a conversion kit for treatments utilizing powdered or small
granulated products, and a double jet kit, both simple to install.
48
Backpack mistblowers
AT 2062
AT 800
AT 8000
Power
Displacement
Max. air flow
Liquid delivery rate
4.5 HP - 3.3 kW
5 HP - 3.7 kW (SAE)
61.3 cm3
72.4 cm3
3
20.0 m /min
16.0 m3/min
0.67 ÷ 5.15 L/min
0.5 ÷ 3 L/min
Liquid tank capacity
16.0 L
14 L
Weight
11.5 Kg
12.5 Kg
Model AT 800 available only in certain markets.
AT 2062
49
Sprayers
Ideal for targeted and
selective treatments, thanks
to the convenient pressure
and atomization controls.
The machine directs the spray
just where it is needed, avoiding
unnecessary waste and ensuring
plants and crops are not damaged.
High resistance to stress assured,
even when for lengthy stints and
operating in hostile conditions.
Proper maintenance of sprayer
Inspect the air filter, and replace if clogged or damaged.
Check the condition of the fuel filter periodically; if soiled
excessively, discard and fit a replacement.
Clean the cylinder fins periodically, removing dirt and debris
with a brush and compressed air.
Periodically, clean the spark plug and check the electrode
gap (0.5 mm).
Guide to sprayer selection
For targeted and selective treatment on vegetation and crops the recommended machines are
backpack models equipped with petrol engines of between 20 and 30 cm³ displacement, preferably
with primer and Lift Starter for easy ignition. Equally important is the possibility of pressure adjustment, to
precisely match the flow pressure to the type of use. Available with different lances with multiple jets
for a larger angle of atomisation.
50
Backpack sprayer
IS 2026
Power
Displacement
Liquid tank capacity
Max. delivery rate
Max.pressure
Weight
1.2 HP - 0.9 kW
25.4 cm3
25 L
8 L/min
35 Kg/cm2
9.0 Kg
51
52
Other power equipment
53
High-pressure washers
Ideal for cleaning outdoors
around the home, in the garden
and the garage: a natural
addition to the Emak range of
products for gardening and
plant care. Vanguard materials
and manufacturing methods
combine with innovative design
to ensure hygiene, cleanliness and
optimum results. Special electrical
device ensures smooth power-up
and start, whatever the type of
connection to the mains supply.
Proper maintenance
of high pressure washer
Check the power cable, high pressure hose, fittings
and lance hose.
Periodically check the level of oil in the pump, and
change the oil when necessary.
Clean the water inlet filter periodically.
Check the water circuit of the pump, and change the
hoses if necessary.
Clean the jet nozzle periodically, using the special pin
provided.
Check the inlet and outlet valves of the pump.
Check the pump control valve.
Check the tightness of the pump screws.
Inspect the safety devices.
Guide to high pressure washer selection
For cleaning outdoor areas around the home, garden or garage, we recommend cold water high
pressure washers, which are designed to ensure convenient and practical cleaning. Supplied with a
generous standard equipment package, these high pressure washers deliver lasting performance and
efficiency.
Professional users should opt for the professional cold water high pressure washers, which assure
structural strength and dependability in any working conditions thanks to internal parts made of stainless
steel and brass, as well as tough piston pumps with control valve and pressure gauge.
For cleaning large areas (such as yards and arcades), industrial facilities such as factory floors or
machinery, and whenever the extra cleaning power of hot water is required, we recommend the hot water
electric high pressure washer. It incorporates a vertical boiler with double spiral coil, for fast water
heating.
54
High-pressure washers for home use
IP 1450 S
IP 1100 S
IP 1210 S
IP 1360 S
IP 1450 S
Pressure
120 bar
130 bar
140 bar
150 bar
Flow rate
360 L/h
360 L/h
410 L/h
480 L/h
Rated power
Pump
1.6 kW
1.7 kW
2.0 kW
2.3 kW
aluminium
aluminium
aluminium
brass
High-pressure washers for intensive use
IP 1750 S
IP 1900 S
IPX 2000 S
Pressure
150 bar
160 bar
200 bar
Flow rate
510 L/h
600 L/h
720 L/h
Rated power
2.4 kW
2.9 kW
-
-
-
6 HP
brass
brass
brass, self-priming
with control valve
Powerful petrol engine
Pump
IP 1900 S
Professional high-pressure washer
IP 3000 HS
Pressure
150 bar
Flow Rate
540 L/h
Engine power
2.7 kW
Pump
Hot water temperature
brass
max 90°C
55
Rotary tillers
Machines for gardeners, growers
and landscaping contractors;
indispensable for soil preparation,
cultivation and general tillage over
sizeable expanses.
Sturdy, yet easy to handle,
these machines will make light
work even of the hardest and most
uncultivated soils, when preparing
for future grass or crop seeding.
Proper maintenance of rotary tiller
Change the engine oil after every 6 months or 50 hours of
use.
Check the fuel filter periodically, replace if damaged or
excessively soiled.
Clean or replace the air filter periodically.
Keep the cooling circuit clean, and clean or replace the
spark plug periodically.
Clean the cylinder fins periodically by brushing, or
blasting with compressed air.
Periodically lubricate the mechanical linkages, control
cables and belt tensioner pivot with oil.
Check the condition of the blades periodically and
sharpen or replace as necessary.
At least once during every season, check the tightness
of all nuts and bolts, especially those of the blade rotor.
Check the spark arrester screen periodically and replace
it if holed, bent or buckled.
Check the level of oil in the gear case before using the
machine, every time. Change the oil periodically.
Inspect and adjust the tensioner and propulsion control
cables.
Guide to rotary tiller selection
Robust and reliable, easy to handle and user-friendly, rotary tillers are indispensable for soil preparation,
cultivation and general tillage over sizeable expanses.
For home users taking care of small-medium sized gardens and allotments that call for periodic
maintenance and a range of different activities we recommend models with rotors from 60 to 80 cm,
equipped with overhead valve (OHV) engines with displacement of up to 200 cm3. The adjustable
handlebars allow the operator to work more comfortably.
The professional model with 90 cm rotor, ideal for gardeners and market gardeners, is designed
to offer excellent performance also on hard soils and uneven terrain and it is an invaluable
machine for both landscape maintenance and agricultural operations. Equipped with reverse gear
which facilitates manoeuvres and repositioning of the machine in accordance with work requirements.
Equipped with adjustable handlebar with different position settings for maximum versatility of use.
56
Compact rotary tiller for home use and accessories
MZ 2030
Engine make/model
Roller brush
Honda GX 25
Displacement
25 cm3
Gearbox
Scarifier
1 forward speed
Rotor
2+2 blades - 30 cm
Plough
Rotary tiller for home use
MZ 2050 RKS
Engine make/model
Displacement
Gearbox
Rotor
Emak K 700 H OHV
182 cm³
1 foward speed +
1 reverse
2+2 blades 60 cm
with protection discs
Rotary tillers for intensive use
MZ 2090 RXS
Engine make/model
Displacement
Gearbox
Rotor
MZ 2080 RKS
MZ 2080 RS
MZ 2090 RXS
Emak K 800 H OHV
B&S 950 OHV series
Honda GX 160 OHV
182 cm³
208 cm³
163 cm3
1 foward speed
+ 1 reverse
1 foward speed
+ 1 reverse
1 foward speed
+ 1 reverse
3+3 blades 80 cm
with protection discs
3+3 blades 80 cm
with protection discs
3+3 blades 80 cm
with protection discs
Rotary tiller for professional use
MZ 2100 R
Engine make/model
Displacement
Honda GX 160 OHV
163 cm3
Gearbox
2 forward speeds +
1 reverse
Rotor
3+3 blades 90 cm
with protection discs
57
Earth augers
Used for sinking holes to
receive vines and plants in
general, greenhouse poles or
fence uprights, lampposts.
Machines affording superior
mechanical strength under the
most hostile of conditions, in all
operating positions and for the
toughest of jobs on
the hardest of soils.
Proper maintenance of earth auger
Inspect and clean the air filter periodically.
Check the state of the fuel filter periodically, and replace
if necessary.
To ensure efficient cooling, clean the cylinder fins by
brushing, or blasting with compressed air.
Clean the spark plug periodically and check the
electrode gap.
After every 100 hours of use, change the grease in the
gear case.
Inspect the bit regularly for signs of wear and damage.
Check the flight and the pilot tip, sharpening or replacing
as necessary.
Guide to earth auger selection
For small holes we recommend medium-power models (up to 50 cm³) which are ideal for individual work,
since the engine controls can be operated using one hand.
For larger holes and harder soils which require the presence of two operators, we recommend the
high-power professional models (up to 90 cm³), with double handle and reversing gear. The two-man
professional models can also be used with auger bits of smaller diameter by fitting the adapter supplied.
58
Earth augers
Power
TR 1551
TR 1585 R
2.1 HP - 1.6 kW
5.7 HP - 4.2 kW
3
50.2 cm
Bit diameter
8-10-15-20 cm
from 8 to 50 cm
9.1 Kg
30.6 Kg
Weight without bit
TR 1551
80.7 cm3
Diplacement
59
Snow throwers are ideal machines
for clearing snow from patios,
pavements and paths even on a
slope. All models, equipped with
Snow throwers
special supergrip snow tyres or
tracks, guarantee the maximum
grip on all types of terrain and
ground surface, even with
compact or frozen snow.
Proper maintenance of snow thrower
Each time the snow thrower is to be used, check the oil
level and, if necessary, change the oil (refer to the operating
and maintenance manual).
In the electric starting model check the battery charge at
least once every 3 months.
Check that the tyre inflation pressure is correct.
Lubricate the augers via the relative grease nipple;
lubricate the ejector chute rotation ring at least once
every 3 months.
Guide to snow thrower selection
The model must be chosen on the basis of the snow conditions in the area of use; for example, if the
snowdrifts to be removed are small, it is better to avoid excessively wide augers (efficiency of the
snow thrower is optimal only when the impeller is completely filled with snow). Models with limited
working width are also the most suitable for working in confined spaces or when the Garden has many
obstacles and a large number of curves.
Vice versa, select models with wider augers (and consequently with more powerful engines) combined
with crawler track transmission to clear heavy snowfalls.
If the snow thrower is to be garaged in a place that is poorly protected from low temperatures,
choose an electric start model to avoid starting problems. The heated handgrips provide the maximum
level of operator comfort during use of the snow thrower.
60
ARTIK snow throwers for home use
ARTIK 56 EL
Engine make/model
Starting
ARTIK 52
ARTIK 56
ARTIK 56 EL
Emak 163 cm³ (5.5 HP)
Emak 182 cm³ (6 HP)
Emak 212 cm³ (7 HP)
manual
manual
manual/electric 12 V
Working width
52 cm
56 cm
56 cm
Propulsion
manual
self-propelled
self-propelled
Gearbox
1 forward speed
7-speed
(5 forward + 2 reverse)
7-speed
(5 forward + 2 reverse)
N° stages
1 stage
2
2
manual / 190° horizontal
70° vertical
manual / 190° horizontal
70° vertical
manual / 190° horizontal
70° vertical
2-8 m
8-12 m
8-12 m
no
no
no
Ejector chute
adjustment
Maximum discharge
range
Control console
Worklight
no
no
yes
Tyres type
9"x3.5"x6 super-grip
13"x4.1"-6 super-grip
13"x4.1"-6 super-grip
45 Kg
70 Kg
73 Kg
ARTIK 62 ELD
ARTIK 70 ELD
ARTIK 72 ELDT
Engine make/model
Emak 265 cm³ (9 HP)
Emak 302 cm³ (10 HP)
Emak 375 cm³ (13 HP)
Starting
manual/electric 230 V
(110 V)
manual/electric 230 V
(110 V)
manual/electric 230 V
(110 V)
62 cm
70 cm
70 cm
self-propelled
self-propelled
self-propelled
8-speed
(6 forward + 2 reverse)
8-speed
(6 forward + 2 reverse)
8-speed
(6 forward + 2 reverse)
Weight
ARTIK 70 ELD
Working width
Propulsion
Gearbox
N° stages
Ejector chute
adjustment
Maximum discharge
range
Control console
2
2
2
manual / 190° horizontal
70° vertical
manual / 190° horizontal
70° vertical
manual / 190° horizontal
70° vertical
10-15 m
10-15 m
10-15 m
yes
yes
yes
Worklight
yes
yes
yes
Tyres type
14"x5"-6 super-grip
15"x6.5"-7 super-grip
tracks
85 Kg
118 Kg
118 Kg
Weight
61
Transporters
Ideal for construction and
agricultural duties involving the
transportation of bulky and heavy
loads on steep gradients or over
rough terrain. Designed to stringent
quality standards, these machines
offer top performance in terms of
carrying capacity, matchless longterm reliability and a high level
of operator safety even
on steep gradients.
Proper maintenance of transporter
Check the oil level regularly and change the oil whenever
necessary.
Inspect and clean the air filter periodically, replacing as
necessary.
Keep the cooling circuit clean, and clean or replace the
spark plug.
Change the transmission oil after the first 50 hours of
use and then after every 100 hours of use.
Inspect and clean the brake assembly periodically.
Adjust the side-mounted halfshaft release and brake
levers.
Check the track tension adjustment periodically.
Guide to transporter selection
For carrying firewood or harvesting fruit on private land, the ideal choice is the manual dump
transporter, which generally offers a load capacity of up to 400 kg. A useful feature is the telescoping
dumper body, which facilitates loading operations and makes it easier to carry very bulky loads.
On the other hand, if you are looking for a transporter which guarantees matchless long-term reliability
and solid grip on any type of terrain, the recommended option is a professional transporter with load
capacity of between 400 and 600 kg. Equipped with manual or hydraulically-operated dumper body,
they also incorporate telescoping and fully collapsible sides.
An essential feature is the tight turning radius, for easy manoeuvring even in confined spaces.
62
Transporters for home use
TN 3400 K
Engine
Displacement
TN 3400 H
TN 3400 K
Honda GCV 140
Emak K 650 OHV
3
160 cm
159 cm3
Gearbox
2+2
2+2
Lift/dump
manual
manual
telescoping /
350 Kg
telescoping /
350 Kg
Loading deck/Payload
Professional transporters
Engine
Displacement
TN 4500
TN 5600
Honda GX 160
Honda GX 160
3
163 cm
163 cm3
Gearbox
3 + 1R
4 + 2R
Lift/dump
manual
manual
telescoping /
450 Kg
telescoping /
550 Kg
Loading deck/Payload
TN 5600
63
Safety first and foremost
Operator safety is one of the top priorities for manufacturers of gardening machines. In addition to designing and implementing
technological devices designed exclusively to safeguard the user, Efco also presents a genuinely comprehensive range of
protective clothing and a generous selection of accessories designed especially to improve levels of safety still further, all
of which type approved to EC standards.
Protective clothing
Protective helmet
Safety
Approved helmet to EN 397, ANSI Z89.1:2003.
Approved ear defenders to EN 352-3: 1997.
Approved face shield to EN 1732, EN 166.
Materials
Shell in UV-resistant polyethylene.
Plastic harness with 4-point suspension.
Sweatband and manual adjustment system.
SNR 23 dB adjustable ear defenders.
Face shield holder.
Metal mesh face shield.
Professional protective and noise-filtering
ear defenders
Safety
EN 352-1 approved ear defenders.
Category 2 PPE.
Materials
Shell made of UV-resistant ABS
(shock absorbent).
Stainless steel headband.
Adjustable.
Attenuation (SNR): 32 dB.
PVC + foam sound insulation.
Professional chain-resistant
gloves
Safety
EN 388/03, EN 381-7/99, approved gloves
Category 2 PPE.
Materials
1.2–1.4 mm gauge full-grain cowhide.
Elasticated cuffs.
Polyester dorsal reinforcement.
Leather cuff guard for arteries.
Dungarees with anti-cut protection
Safety
CE approval, standards EN340 and EN 381-5:
1995 type A, Class 1, Category 2 PPE.
Special 8-layer anti-cut protection.
Visibility
Orange coloured bib.
Detail of pockets.
Materials
Materials.
33% cotton, 67% polyester, 245 g/m2.
Waterproofed bottom.
64
Jacket with anti-cut protection
Safety
CE approval, standards EN340 and
EN 381-11: 2002, Class 1.
Category 2 PPE.
Special 8-layer anti-cut protection.
Visibility
Large front and rear orange coloured area with reflective profile for the maximum daytime and night-time visibility.
Materials
Impermeable.
33% cotton, 67% polyester.
245 gr/m2.
Dark protective spectacles
Safety
EN 166 approved protective spectacles.
Optical class 1.
Materials
Wrap-around anti-scratch lens, dark, anti-glare in
sunlight, soft silicone nose pads.
Mechanical strength: Lens FT - Frame FT.
Professional brushcutter operator trousers
Safety
Approval CE EN340.
Class 1.
Category 1 PPE.
Visibility
Orange coloured trims.
Materials
Waterproofed fabric 33% cotton, 67% polyester.
High strength protection at the front of the leg.
Leg protection 30% cotton, 70% polyester.
Chain resistant forestry boots
Safety
Approval EN ISO 17249, EN ISO 20344,
EN ISO 20345 (class S3CI-HRO),
Class 2.
Category 2 PPE.
Materials
Upper in water repellent full grain leather.
Inner lined in leather and breathable fabric.
Anti-impact padding at calf height.
Anatomical and antistatic “EVA” footbed with high sweat absorption / deabsorption coefficient.
HRO-rated vulcanized rubber sole (resists temperatures up to 300°) with deep cleated tread.
Puncture resistant sole plate.
Rigid steel toecap and blade blocking protection from top
of foot up to the shin and on the sides.
Accessories and spare parts - the value of being original
To ensure machines will give long service and stay effective throughout, always use original spare parts and accessories:
a certain way to continue reaping the benefits of performance and safety standards offered by chainsaws, lawnmowers,
brushcutters, garden tractors and all other products in the Efco range.
“PROSINT 2” special oil for 2-stroke engines
Special “PROSINT 2” synthetic ester-based lubricant, expressly
formulated for high-performance 2-stroke engines. Special oil for use
at 2% (50:1). Effective lubrication at high temperatures. Low emissions,
reduced wear and clean engine.
Its pre-fluidified composition makes preparing the mixture easy. Colour:
dark red.
Exceeds API TC, JASO FC and ISO-L-EGD specifications.
“CHAIN LUBE” guide bar and chain protector
Formulated expressly for the protection of guide bars and chains, based on a balanced
blend of oils which are specially resistant to low temperatures. Easily biodegradable.
Special additives guarantee appreciable protection against wear and seizure. Good
viscosity and pour point.
POLAR LUBE mineral oil for guide bars and chains
Mineral-based lubricant, high viscosity, extremely adhesive,
formulated for lubrication of chain saw guide bars and chains. Ensures
excellent stability and pour point at low temperatures, good wear
protection and outstanding corrosion resistance.
Special oil for 4-stroke engines – SAE 10 W - 30
Synthetic oil based lubricant, SAE 10 W - 30 grade, specifically developed for 4-stroke air- and water-cooled engines
used in gardening sector applications. High-performance all-season oil containing a special combination of additives
that give excellent detergent and dispersant, antioxidant, anticorrisive, and anti-wear properties.
Accessories and spare parts
To find out about the extensive range of original parts and accessories, consult an Efco authorized dealer.
Exceeds API SL/CF specifications.
Special grease
Special high quality lithium grease with molybdenum bisulphide, recommended
for any mechanical component subject to heavy loading.
Exceeds ISO 6743-9; DIN 51825 KPF 2K - 30 specifications.
“ADDITIX 2000” special additive for petrol and diesel fuels
Ideal for conditioning diesel fuel, 2-stroke mixture and leaded or unleaded petrol.
Prevents deterioration of fuel for at least 12 months and protects against oxidation
Facilitates starting, keeps fuel system clean, and protects against rust and corrosion.
65
Greater peace of mind and efficiency thanks to technical assistance
Mowing the lawn, clearing up grass and twigs, trimming
hedges or thinning the foliage of trees, watering, pruning,
Advantages
offered by Efco dealerships
Advice on purchase:
these are important jobs that need to be done, if gardens or
outdoor areas are to look good and stay healthy, but they can
also be of value simply as enjoyable pastimes for lovers of
greenery and life in the open air.
the Efco dealer will advise you on the machine
best suited to your needs, and provide all pertinent
Enjoyable, thanks not least to the high standards offered
information on correct use of the product.
by all Efco machines in terms of performance, comfort
and safety. A machine must be used correctly and properly
Service
Specialized technical service:
maintained if it is to retain its original quality, add value to
users are ensured quality repairs, carried out as
the work of the operator and deliver the expected service life
quickly as is practically possible. Products for home
and long-term reliability. Accordingly, the careful observance
use are guaranteed two years.
of a few simple guidelines will ensure you continue to derive
maximum satisfaction from your machine.
After-sales service:
all Efco dealers are skilled operators who regularly
attend refresher and specialization courses
enabling them to offer the customer clear and
comprehensive information, always in line with
developments in the sector.
Original parts and accessories:
repairs or replacements of components are
carried out using only Efco original spare parts
and accessories. A guarantee that machines will
maintain their performance undiminished over time.
Contact only an Efco authorized dealer when
making a purchase: you will be advised as to which
is the best machine for your needs, told about correct
and safe operating procedures, and instructed how
to prepare it for first time use;
Every machine is accompanied by an Operator
Instruction Book included in the packaging, which
you will receive at the moment of purchase: be sure
to read the book carefully before use;
Have your product checked over periodically by an
Efco authorized dealer: this will ensure the machine
always stays in tip-top condition and matches up
fully to your expectations;
Always use original spare parts and accessories,
which your Efco authorized dealer will be able to
supply.
66
Data and illustrations published in the catalogue are not binding where specifications of materials are concerned,
given that these will always be subject to technical improvement. Technical specifications given in the catalogue are
subject to change without notice, as also are directions relating to general use of the equipment.
Certain items are not available in all countries, or are available only on request.
Subject to modifications. Some models are available for certain markets only. - Cod. 3084859N - 2015
It’s an Emak S.p.A. trademark
42011 Bagnolo in Piano (RE) Italy
Tel. +39 0522 956611 • Fax +39 0522 951555
info@myefco.com • www.myefco.com
www.youtube.com/MyEfco