LIBERA Series REFERENCE STANDARDS CATALOGUE SECTION: 1.1 IEC 62196-1 Plugs, socket-outlets, vehicle couplers and vehicle inlets - Conductive charging of electric vehicles. Part 1: charging of electric vehicles up to 250A a.c. and 400A d.c. IEC 62196-2 Plugs, socket-outlets and vehicle couplers. Conductive charging of electric vehicles. THE “SAFE-IN” SAFETY DEVICE Acids Saline solution Concentrated Resistant Limited Resistance Bases Diluted Concentrated Resistant Limited Resistance Solvents Diluted Hexane Benzol Acetone Alcohol Resistant Not Resistant Not Resistant Not Resistant Limited Resistance Mineral oil UV rays Resistant Resistant Part 2: Dimensional interchangeability requirements for a.c. pin and contact-tube accessories. THE “SAFE-IN” SAFETY DEVICE IEC 61851-1 Electric vehicle conductive charging system. Part 1: General requirement. CEI 69-6 Standardization sheet of plug and socket-outlet for the connection of eletric road vehicles to the supply network. VERSIONS PILOT The “SAFE-IN” device works like the protection installed on household sockets, i.e., by means of an appropriate shutter, it closes the input of the socket contact tubes and prevents accidental and voluntary contact of live parts of the socket with slim objects, such as screwdrivers or wires. This protection offers an additional safety guarantee, in addition to that already provided by the spring-loaded cover assembled on the mobile sockets. LIBERA Series CONNECTORS FOR ELECTRIC VEHICLES The indispensable safety during the conductive recharge of the eletric road vehicles is assured by the use of plug and socket outlet provided of back up terminal (pilot) in addition to the active and protection poles. The back up terminal allow to make a control pilot circuit with the following functions: - verification that the vehicle is properly connected; - continuous protective earth conductor integrity checking; - energization of the system; - de-energization of the system. QUALITY MARKS i Flush mounting sockets CSV TECHNICAL CHARACTERISTICS Flush mounting sockets with block Nominal current: 16A single-phase (type 3A) 16 Plug Sockets: 16-32A single/three-phase (type 3C) Nominal voltage: 0-30V (signal) -12/+12VDC (block) 200-250VAC (single-phase) 380-480VAC (three-phase) Frequency: 50-60Hz Insulating voltage: 250V (type 3A) – 500V (type 3C) Degree of protection: IP44 IPXXD (type 3A socket, type 3C plug and socket not connected) Operating temperature: -30°C +50°C Glow Wire test / UL94: 650°C/850°C (type 3A) 960°C/V0 (type 3C) Material: Technopolymer Halogen Free: Yes IK degree at 20°C: IK07 (type 3A) – IK08 (type 3C) Number of poles: L1-N-E-CP (type 3A) L1-L2-L3-N-E-CP-PP (type 3C) Saline solution: Resistant UV rays: Resistant Plugs Connectors Appliance inlets Adaptors for domestic applications Connector tube protective shuter for greater safety against direct contacts. (The SAFE-IN safety device). APPLICATION EXAMPLES 494 LUX Series TYPE OF COUPLING EN 60238 Edison screw lampholders. E14 E27 EN 60838-1 Miscellaneous lampholders. Part 1: general requirements and tests. EN 61058-1 Switches for appliances. Part 1: general requirements. VERSIONS QUALITY MARKS Lampholders - For incandescent lamps (E14-E27) - For fluorescent lamps (G5-G23) - For halogen lamps (G4-GX53-GY6.35-R75) h i Switches - press switches - pull switches - slide in-line switches - foot switches Ceiling accessories Thermoset lampholders: left, with E27 coupling, partly threaded skirt and metal nipple; right, with E14 coupling, fully threaded skirt and moulded thread. 495 Metal lampholder. Detail of locking screw and earth terminal. Slide in-line switch, with neutral connection for flat cable. APPLICATION EXAMPLES B22 G4 GZ4 GX5,3 GY6,35 R7S RX7S RX7S-24 RX7S-26 RX7S-32 LUX Series REFERENCE STANDARDS CATALOGUE SECTION: 4.4 LAMPHOLDER LUX Series COD. 190.3570S/ES - 190.3585S/ES COD. 190.CP70A/B - 190.CP85A/B COD. 190.6000 LN/LNB/LT/LG/LGB COD. 190.2000LN/LNB/LG/LGB COD. 190.6000FN/FNB/FT/FG/FGB COD. 190.6000FCN/FCNB/FCT/FCG/FCGB COD. 190.5778B COD. 190.5778/304T COD. 190.5778/306L COD. 190.5778.311T COD. 190.5778/313T COD. 190.5778/348 COD. 195.115B COD. 195.200B LUX Series CATALOGUE SECTION: 4.4 DIMENSIONS COD. 190.2000FN/FNB/FG/FGB COD. 190.2000FCN/FCNB/FCG/FCGB 496 LUX Series COD. 190.5727 COD. 190.5740B1 COD. 190.8200 - 190.8200T COD. 191.5031 COD. 191.5122 COD. 191.5124 497 COD. 190.363B/N COD. 195.450B/N/P COD. 190.366B/N LUX Series CATALOGUE SECTION: 4.4 DIMENSIONS COD. 190.376B/N COD. 195.565B/N/P LUX Series COD. 190.3570S/ES - 190.3585S/ES COD. 190.CP70A/B - 190.CP85A/B COD. 190.6000 LN/LNB/LT/LG/LGB COD. 190.2000LN/LNB/LG/LGB COD. 190.6000FN/FNB/FT/FG/FGB COD. 190.6000FCN/FCNB/FCT/FCG/FCGB COD. 190.5778B COD. 190.5778/304T COD. 190.5778/306L COD. 190.5778.311T COD. 190.5778/313T COD. 190.5778/348 COD. 195.115B COD. 195.200B LUX Series CATALOGUE SECTION: 4.4 DIMENSIONS COD. 190.2000FN/FNB/FG/FGB COD. 190.2000FCN/FCNB/FCG/FCGB 496 LUX Series COD. 190.5727 COD. 190.5740B1 COD. 190.8200 - 190.8200T COD. 191.5031 COD. 191.5122 COD. 191.5124 497 COD. 190.363B/N COD. 195.450B/N/P COD. 190.366B/N LUX Series CATALOGUE SECTION: 4.4 DIMENSIONS COD. 190.376B/N COD. 195.565B/N/P