INTERIOR FIXTURE Mini LENS OPTIONS Designed as a protective dust cover/shield where lamp protection is required. This lens is designed for the least amount of visual objection and does not sacrifice glare control. FABRICATED METAL WALL WASH FIXTURES Lens sits on fixture ledge and snaps into position behind reflector dimples. AVAILABLE FOR: AK, AKS, AKTB, DW, DWS, DWTB, MAXI, MAXI-S, MAXI-TB, MINI, MP, MPS, MPTB STANDARD OPTION (most models): Clear Lexan (polycarbonate) Lens with 87% light transmission. ORDERING: Add -ML to catalog number; i.e.: 140 BXWW-AK-ML FABRICATED METAL INDIRECT FIXTURES Lens snaps into position covering the top of the lamp shield basket. STANDARD OPTION: Clear Lexan (polycarbonate) Lens with 87% light transmission. Only available in Lexan. AVAILABLE FOR: ID, IDTB, IDS ORDERING: Add -ML to catalog number; i.e.: 155 BXID-TB-ML EXTRUDED ALUMINUM FIXTURES Lens attaches to fixture extrusion with hinge and snaps into position behind reflector dimples. STANDARD OPTION (most models): Clear Lexan (polycarbonate) Lens with 87% light transmission. ORDERING: Add -ML to catalog number; i.e.: 140 BXWW-A9-ML AVAILABLE FOR: A6, A9, A15, SY CAST GRG* HOLE IN THE WALL FIXTURES Lens attaches to fixture insert with mini screws. SUPPLIED STANDARD: Clear Lexan or Glass Lens with 87% or 95% light transmission respectively. (most models) ALTERNATE OPTIONS: Frosted Lexan Add –MLF to catalog number. Frosted Glass Add -ML-TGL to catalog number. AVAILABLE FOR: HITW CAST GRG* HOLE IN THE CEILING FIXTURES Lexan lens attaches to fixture insert with inconspicuous hardware. OR Milk White, Glass Lift and Shift lens is angled into the fixture and rests on the casting ledge. (Supplied Standard with all “LSGL” fixtures) AVAILABLE FOR THIS SERIES: HITC STANDARD OPTION (most models): Frosted Lexan Lens with 86% light transmission. ORDERING: Add -MLF to catalog number; i.e.: 126 QD-HITC-S-6-MLF CAST GRG* SLOT IN THE CEILING FIXTURES Lift and Shift lens is angled into the fixture then rests on the metal ledge. AVAILABLE FOR: SITC SUPPLIED STANDARD: Milk White Acrylic Lens with 54% light transmission. ALTERNATE OPTION: FROSTED: Add -MLF; i.e.: 232T8-SITC-MLF Mini LENS AVAILABLE OPTIONS Frosted Acrylic, 91% transmission Milk White Acrylic, 54% transmission (See Series catalog sheet) Milk White Tempered Glass, 54% transmission Clear Lexan (polycarbonate), 87% transmission Frosted Lexan (polycarbonate), 86% transmission For specials or custom design, contact factory. *GRG = Glass fiber Reinforced Gypsum, is a composite material used to make fixture housings that blend with gypsum/plaster construction. 10768 LOWER AZUSA RD., EL MONTE, CA 91731 • 626-579-0943 • FAX: 626-579-6803 • E-mail: contact@elplighting.com • WEB: www.elplighting.com