SHENZHEN JOYLEDS LIGHTING CO., LTD.
LED FLOOD LIGHT Series Specification
（JL-FLB-50W）
I. Product Description
Our company’s LED Flood Light (also called LED Wall Washer Light) is using high power
surface mounted LED module with many chips (Bridgelux type). High brightness. Low lumen
decrease. Ideal replacement product for metal halide lamp. 5mm high strengthen tempera glass.
II、Advantages：
1．Light Sources: High Power Surface Mounted LED Module with many chips (Bridgelux type).Less
Lumen decrease. High brightness. Good for getting heat out. For this type JL-FLB-50W, it
is using 50Watt. Which can replace 250Watt Metal Halide lamp.
2．Light Distance: Maximum can reach 30-35Meters.
3．Light Body: The housing is die casting aluminum material. Which is good for getting the heat out.
Thus it can protect the life age of the light source. Good heat-sink assures the lamp can be used in
high temperature environment.
4.
View Angle: 120 degree.
5．IP Degree: IP65.
6. Application Areas: Ideal products for lighting Walls, Boards, Advertisement Boards, Gardens,
Hotels, Rooms, Clubs etc.
III. Specification, parameter
1、 LED parameter
Item
Min
Typical
Max
Power
-
50 W
53 W
Rated current
-
1.3 A
1.4A
Rated voltage
29V
31.2 V
32.5 V
Warm white CCT
2700 K
3200 K
3900 K
White CCT
4000 K
5500 K
6000 K
Cold white CCT
6000 K
6500 K
7000 K
-
85 ℃
105 ℃
LED chipset Q’ty
-
50 PCS
-
LED IP grade
65
65
65
Normal working
temperature
Bridge Lux
LED chipset
2、 Lighting technical parameters
Input Voltage
AC85V～265V
Freqency Range
50Hz～60Hz
Total Harmonic Distortion
≤ 9 %
Power Factor
＞0.9
Power Efficiency
＞85 %
Working Voltage
DC32V
Led quantity
1 pc
Led Consumption
43W
System Consumption
50W
lamp’s Efficiency
＞91 %
Color Temperature
Please refer to above LED parameter table
Lumen Brightness
5500LM
Junction Temperature
≤80℃
Working Temperature
-40℃ ～ +55℃
Storage Temperature
-25℃ ～ +65℃（25℃best）
IP Grade
IP65
Net weight
3.86Kg
Working Life-span
50000H
0.75mm2 three-core cable
Power line
Connect wire
Brown
L Live wire
Blue
N Null line
Yellow/Green
G Grounding
The color of the lamp shell
Black, Silver-White are optional
Certificate
CE
****** Note:Different CCT LEDS has different optical properties. The deviation is
less than 5%******
ISOCANDELA DIAGRAM
AAI FIGURE
3、Product Size
JL-FLB-50W
IV、Use Instruction
1、Input Voltage：AC 85V～265V 50/60Hz。
2、Storage Temperature: -650C～+500C.Working Temperature：-300C～+500C，Best Working Temperature:
-00C～+300C
3、Handle carefully since there are glass inside the box.
V，Installation instructions
1.
It can be fixed to the poles with screws through the φ10mm holes.
2、After the product is fixed, screw 1A and 1b can be loose. Then change the bracket’s angle, that is
to say , change installation angle.
3、Working environment temperature, storage.
4、In order to avoid leakage, wire splices should be sealed up while installing lights
5、Must take the appropriate waterproofing, leakage measures when using external power supply.
6、Mustn’t violate any fire safety regulations when using this lamp.
7、It should be installed by professional electrician.
VI,
Maintenance instructions:
1、Please make sure that it has been cut off before maintaining.
2、Clean flood lamp’s glass periodically to make sure of the transmission of light.
3、Clean flood lamp’s housing and radiator periodically to make sure of good performance of heat
dissipation .
4、Don't clean it with water or corrosive solution but dry rag.
5、When change power supply, you can directly use screwdriver to open rear cover and take out the
power supply. AC power supply has three-core cables: brown is for power supply’s “L”, blue is for
”. DC power supply’s red wire is for anode; while
“N”, yellow or yellow-green is for “
black is for cathode. Don't mix them.