ET MODULE
polycrystalline
ET-P636145
ET-P636140
ET-P636135
ET-P636130
ET-P636125
ET-P636120
145W
140W
135W
130W
125W
120W
Features
High module conversion efficiency, through
superior manufacturing technology
Entire module certificated to withstand high
wind loads and snow loads
Anodized aluminum is mainly for improving
corrosion resistance
Highly transpa rent , low-iron, tempered
glass
Benefits
25-year warranty on power output; 5-year
warranty on materials and workmanship
Product liability insurance
Local technical support
Local warehousing
48 hour-response service
Enhanced design for easy installation and
long term reliability
Excellent performance under low light
environments
YOUR ET SOLAR DISTRIBUTOR
SOLIGENT
800-967-6917
www.soligent.net
IEC 61215 Ed.2
IEC 61730
www.etsolar.com
ELECTRICAL SPECIFICATIONS
Model type
ET-P636145
ET-P636140
ET-P636135
ET-P636130
ET-P636125
145W
140W
135W
130W
125W
Peak power (Pmax)
ET-P636120
120W
Cell Efficiency
Module Efficiency
17.06%
16.47%
15.88%
15.29%
14.71%
14.12%
14.50%
13.97%
13.46%
12.98%
12.48%
12.10%
Maximum power voltage (Vmp)
18.17V
17.95V
17.78V
17.62V
17.41V
17.40V
Maximum power current (Imp)
7.98A
7.8A
7.59A
7.38A
7.18A
6.89A
Open circuit voltage (Voc)
22.75V
22.54V
22.26V
22.04V
21.75V
21.75V
Short circuit current (Isc)
8.66A
8.42A
8.28A
8.08A
7.85A
7.63A
Power Tolerance
-1% to +3%
Maximum system voltage
Normal
Normal Operating
Operating Cell
Cell Temperature
Temperature
DC 600 V
45.3±2℃
Series fuse rating (A)
Number
Number of
of Bypass
bypass
diode
ass Diode
15A
3
MECHANICAL SPECIFICATIONS
PHYSICAL CHARACTERISTICS
Unit:mm (inch)
50
36 cells in series
4
4
156mm x 156mm
40 (1.57)
13.18 kg (29.06 lbs)
1482×676×40 mm
(58.3×26.6×1.57 inch)
Weight
h
Weight
Dimensions
0
-3
0'
50
Cell type
type
yp
Cell
Number of cells
45°
8
8
Junction box
8-14×9
(0.55×0.35)
TEMPERATURE COEFFICIENT
702(27.64)
1202(47.32)
1482(58.35)
1482 (58.4)
Optional
10-φ4
cable(-)cable(+)
Temp. Coeff. of Isc (TK Isc)
0.065 %/℃
Temp. Coeff. of Voc (TK Voc)
-0.346 %/℃
Temp. Coeff. of Pmax (TK Pmax)
29
-0.46 %/℃
638(25.12)
676(26.61)
676 (26.6)
ELECTRICAL CHARACTERISTICS
Electrical performance
(cell temperature:25℃)
100
120
130.2 W
Power(W)
103.0 W
6
75.7 W
4
48.5 W
2
0
21.9 W
5
10
15
20
25
Voltage(V)
1000 W/m
2
800 W/m
2
600 W/m
2
Voc
ISC
100
80
Voc
Pmax
60
40
20
0
-25
Temp.Coeff.of Isc =+0.065%/℃
Temp.Coeff.of Voc =-0.346%/℃
Temp.Coeff.of Pmax=-0.46%/℃
Normalize Isc,Voc and Pmax(%)
8
Normalize Isc,Voc and Pmax(%)
10
Current(A)
Irradiance dependence of Isc,
Voc and Pmax (cell temperature:25℃)
Temperature dependence of Isc,
Voc and Pmax
80
60
40
20
0
0
25
50
75
100
0
CellTemperature (℃)
400 W/m
2
200 W/m
ISC
Pmax
200
400
600
800
1000
Irradiance (W/m2 )
2
Note: the specifications are obtained under the Standard Test Conditions (STCs): 1000 W/m2 solar irradiance, 1.5 Air Mass, and cell temperature of 25 C.
o
The NOCT is obtained under the Test Conditions : 800 W/m2, 20°C ambient temperature, 1 m/s wind speed, AM 1.5 spectrum.
Please contact support@etsolar.com for technical support. The parameters are for reference only, and are subject to change without notice or obligation.