ET MODULE Polycrystalline ET-P63645 45W ET-P63685 85W ET-P63690 90W ET-P63695 95W Features Benefits High module conversion efficiency, through 5-year warranty on materials and workmanship; superior manufacturing technology 12 years at 90% of the minimal rated power output; Entire module certificated to withstand high 25 years at 80% of the minimal rated power output wind loads and snow loads Product liability insurance Anodized aluminum is mainly for improving Local technical support corrosion resistance Local warehousing Highly transpa rent , low-iron, tempered 48 hour-response ser vice glass Enhanced design for easy installation and Excellent performance under low light long term reliability environments IEC 61215 Ed.2 IEC 61730 www.etsolar.com ELECTRICAL SPECIFICATIONS Model Type ET-P63695 ET-P63690 ET-P63685 ET-P63645 Peak power (Pmax) 95W 90W 85W 45W MECHANICAL SPECIFICATIONS Module Efficiency 13.9% 13.2% 12.4% 12.7% Model Type ET-P63695/90/85 ET-P63645 Maximum power voltage (Vmp) 18.0V 17.6V 17.2V 17.6V Cell Type 156mmx 104mm 156mmx 52mm 36 cells in series 36 cells in series Maximum power current (Imp) 5.28A 5.11A 4.94A 2.56A Number of cells Open circuit voltage (Voc) 22.6V 22.2V 21.8V 22.2V Dimensions Short circuit current (Isc) 5.53A 5.48A 5.29A 2.74A 12A 12A 12A 8A Series Fuse Rating (A) Power Tolerance Weight DC 600V Nominal Operating Cell Temperature 45.3±2℃ 8.3 kg (18.30 lbs) Connector ±3% Maximum system voltage 530×670×30mm 1020×670×30mm (40.16×26.38×1.18inch) (20.86×26.38×1.18inch) Junction Box IP67 Wire Type PV Wire PHYSICAL CHARACTERISTICS TEMPERATURE COEFFICIENT Unit:mm (inch) ET-P63695/90/85 30 (1.18) 0.064 %/℃ Temp. Coeff. of Isc (TK Isc) 4.6 kg (10.14 lbs) MC4 Temp. Coeff. of Voc (TK Voc) -0.33 %/℃ Temp. Coeff. of Pmax (TK Pmax) -0.45 %/℃ ELECTRICAL CHARACTERISTICS Electrical performance (cell temperature:25℃) 95.1 W 75.8 W 5 Current(A) 90 4 60 55.9 W 3 45 36.3 W 2 0 5 10 15 30 (1.18) 30 17.3 W 1 ET-P63645 75 400(15.74) 6 Power(W) ET-P63695 15 20 0 25 Voltage(V) Current(A) 2.0 1.5 20 17.1 W 1.0 8.0 W 0.5 0.0 30 26.5 W 0 5 10 15 10 20 25 Voltage(V) 1000 W/m2 800 W/m2 600 W/m2 0 Power(W) 40 35.8 W Normalize Isc,Voc and Pmax(%) 2.5 100 120 50 45.1 W Voc ISC 100 80 Voc Pmax 60 40 20 0 -25 Temp.Coeff.of Isc =+0.064%/℃ Temp.Coeff.of Voc =-0.33%/ ℃ Temp.Coeff.of Pmax=-0.45%/℃ Normalize Isc,Voc and Pmax(%) 3.0 Irradiance dependence of Isc, Voc and Pmax (cell temperature:25℃) Temperature dependence of Isc, Voc and Pmax Electrical performance (cell temperature:25℃) ET-P63645 80 60 40 ISC Pmax 20 0 0 25 50 75 100 200 0 Cell Temperature (℃) 400 W/m2 400 600 800 1000 Irradiance (W/m2) 200 W/m2 Note: the specifications are obtained under the Standard Test Conditions (STCs): 1000 W/m2 solar irradiance, 1.5 Air Mass, and cell temperature of 25 C. o The NOCT is obtained under the Test Conditions : 800 W/m2, 20°C ambient temperature, 1 m/s wind speed, AM 1.5 spectrum. Please contact support@etsolar.com for technical support. The parameters are for reference only, and are subject to change without notice or obligation.