Flasher Unit DESCRIPTION The Flasher Unit start/stop relay M3 is used for turn signal and hazard warning light applications. The flasher can be used in various vehicle types. FUNCTION The supply voltage is connected to terminal 30/87z. When an input voltage is applied to terminal 15 the flasher unit starts immediately, generating 90 +/-30 pulses per minute. The flasher output can switch loads up to 20 A. Higher loads may be switched with a second downstream power relay. The inverted input voltage is present on terminal 87a. Please refer to the chapter housing and base plates for additional housing options. TECHNICAL DATA Technical Data Value Operating temperature -40 °C to 85 °C Operating voltage 12 V / 24 V DC Quiescent current 1 mA Flasher frequency 90 +/ -30 pulses per minute Environmental protection IP53 Life expectancy 1 x 105 cycles for resistive loads e1 approval number 03 5388 max. switching voltage/ switching current/ continuous current/ switch-on current see datasheet Song Chuan 822E-1C-S (12 V) or Hongfa HFKP/ 024-1Z6Z (24 V) Design may be subject of change – no guarantee for this information. DESIGN CONNECTION DIAGRAM ORDER TABLE Technical Data Type Housing 1 Order No. Flasher unit M3 Start/ Stop 12V A S1/ G2/ E 1.007.191.00E Flasher unit M3 Start/ Stop 24V A S1/ G2/ E 1.007.291.00E Flasher unit M3 Start/ Stop 12V B S2/ G2/ Y 1.007.192.00E Flasher unit M3 Start/ Stop 24V B S2/ G2/ Y 1.007.292.00E Flasher unit M3 Start/ Stop 12V C S3/ G2/ E 1.007.193.00E Flasher unit M3 Start/ Stop 24V C S3/ G2/ E 1.007.293.00E Design may be subject of change – no guarantee for this information. ACCESSOIRES Technical Data Order No. Programming tool MRS Realizer I 1.100.000.01 Flat pin socket 1.017.002.00 FASTON terminal 6.3 mm 1.5-2.5 mm FASTON terminal 6.3 mm 1 mm 2 2 FASTON terminal 2.8 mm 0.5-1.0 mm2 103064 102355 105292 Design may be subject of change – no guarantee for this information. 2 Powered by TCPDF (www.tcpdf.org)