HBW16 HBW22

advertisement
COMPACT FLUORESCENT ROUND HIGHBAY
HBW16
HBW22
APPLICATION
The compact fluorescent lamps high bay series
is ideal for location of retail stores, storage areas
and general open areas. Suited for medium to high
mount heights of 20’ or lower.
W2
H2
•
H1
Heavy duty 2 piece, spun aluminum ballast
housing with a white polyester powder paint
finish.
Easy to change out with other reflectors
replace or remove and bottom lens.
W1
MOUNTING:
•
•
HID HIGH BAY & LOW BAY
FEATURES:
•
Comes with die cast hook for easy mounting.
Pendant mount: threaded for 3/4” conduit or
hook mount.
REFLECTOR & BOTTOM LENS:
•
•
•
•
•
•
Anodized aluminum reflector or high impact,
UV-stabilized prismatic polycarbonate reflector
and lens.
Available with conical bottom lens (CL), drop
bottom lens (DP) and heat and impact resistant
tempered clear glass flat lens (FL) in options.
AL16: 16” Diameter reflector.
AL22: 22” Diameter reflector.
BL16: 16” dia. prismatic reflector.
BL22: 22” dia. prismatic reflector.
LAMP:
•
•
Compact fluorescent lamp 4-pin triple twin
tube.
Lamp not included.
CONFIGURATIONS
Bottom Lens
SERIES
# OF LAMPS
LAMP TYPE
HBW16
3, 8
CF26, CF32, CF42
DP: Polycarbonate +UV
HBW22
6, 8
CF26, CF32, CF42
FL: Flat Tempered Clear Glass
CL: Polycarbonate +UV
Specifications: HBW
Height 1 (Rreflector): 11-1/4 (285), 13-3/8 (340)
Width 1 (Rreflector): 16 (410) dia., 22-7/16 (570) dia.
Height 2 (Housing): 4-5/8 (118), 6-1/4 (160)
Width 2 (Housing): 10 (240) dia., 12 (305) dia.
All dimensions are in inches (millimeters).
ELECTRICAL:
•
•
•
•
The compact fluorescent lamps use a
multi-voltage (120-277V) electronic, programmed start and high power factor ballast.
Input voltage: 120-277V.
Input frequency: 50/60Hz.
Available with dimming ballast options.
LISTING:
•
•
•
UL/CUL listed.
Suitable for damp location.
ARRA compliant.
ORDERING INFORMATION
MODEL
HBW16
HBW22
LAMP TYPE
AR
PR
# OF LAMP
Aluminum Reflector
Acrylic Prismatic
Reflector
BOTTOM LENS
(Blank)
CL
DP
FL
EXAMPLE: LBW22-M250-PS-QT-DP
3
4
6
8
GLR
GMF
WG16
WG22
CSL4
CSL6
26W CFL TRT
32W CFL TRT
42W CFL TRT
Fast Blow Fuse 4
Slow Blow Fuse 4
Wire Guard for 16” Reflector
Wire Guard for 22” Reflector
4’ Cord Set and Twist-Lock Plug 5
6’ Cord Set and Twist-Lock Plug 5
NOTES:
1. Pulse start only.
2. 2005 NEC code requires that open luminaires must utilize
a safety glass bottom accessory or an open rated socket or lamp.
3. Without bottom lens; lamps designated as suitable for open rated only.
4. Must specify voltage, not available with 347V and 480V.
UTOPIA LIGHTING reserves the right to change specifications, drawings, dimensions without prior notice.
26TRT
32TRT
42TRT
VOLTAGE
1
UNV
120
277
120-277V
120V
277V
OPTIONS
2
Without lens 3
Conical Bottom lens (Std.)
Drop Lens
Tempered Clear Glass
Flat Lens
LAMP TYPE
SCK
WG
DM
MS
EM
Safety Cable Kit
Wireguard
Dimming 6
Motion sensor 7
Emergency Ballast 8
5. Must specify volts and amperes. (Check with factory)
6. Dimming Ballast options, see page 78.
7. Must specify voltage.
8. Emergency Ballast options, see page 79.
www.utopialightingus.com
1
Download