Emboss Tape
BH CONNECTOR
H
J
S
T
4.0/8.0/12.0mm pitch/Disconnectable Crimp style connectors
Specifications –––––––––––––––––––
• Current rating: 1.0A AC, DC (AWG #22)
• Voltage rating: 600V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/10m Ω max.
After environmental testing/20m Ω max.
• Insulation resistance:
1,000M Ω min.
• Withstanding voltage: 1,800V AC/minute
• Applicable wire: AWG #28 to #22
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
1
H
2
J
S
T
3
Low profile connectors with high
withstanding voltage, designed for
connecting liquid crystal display back light
lamps to their starters.
• Low profile
• SMT configuration
• Applicable to special wires
• Headers with locating bosses
• Housing lock also serves as polarizing device
Standards ––––––––––––––––––––––
0
Recognized E60389
1 Certified LR20812
PC board layout (viewed from component side)
SMT type
(2 circuits 4mm pitch)
(2 1circuits
8mm pitch)
7
12 ±0.1
1.5 ±0.1
1.7 ±0.1
12
3.4±0.1
0.2
9 min
1.7 ±0.1
Through-hole type
16 ±0.1
22
12
1.85
±0.05
9 min
6.4
±0.1
0.2
3.4 ±0.1
9 min
6.4 ±0.1
9 min
9 min
6.4 ±0.1
1.5 ±0.1
1 min
6.4 ±0.1
0.2
3.4 ±0.1
6.4 ±0.1
12 ±0.1
4 ±0.1
19-2
1.7 ±0.1
4-4
2
±0.05
±0.05
8±0.05
φ0.7 ＋0.1
0
φ0.9＋0.1
0
4 ±0.1
4 ±0.1
1.7 ±0.1
0.2
(3 circuits 4mm pitch plugged up)
(4 circuits 4mm pitch with post removed)
24
12 ±0.1
1min
1.5 ±0.1
3.4±0.1
9 min
6.4 ±0.1
1.4 ±0.1
0.2
3.4 ±0.1
0.2
3.4 ±0.1
9 min
6.4 ±0.1
1.5 ±0.1
(4 circuits 4mm pitch)
20
1.7 ±0.1
1min
1.7 ±0.1
4-4
1.5 ±0.1
1.7 ±0.1
8 ±0.1
4 ± 0.1
19
1 min
1.5 ±0.1
9 min
1.5 ±0.1
1min
0.2
3.4 ±0.1
18
＋0.1
φ0.9 0
(3 circuits 4mm pitch)
±0.1
8 ±0.1
1 min
8 ±0.1
1min
1.7 ±0.1
(2 circuits 12mm pitch)
2-12
2 ±0.1
0.2
3.4 ±0.1
9 min
6.4 ±0.1
8 ±0.1
1 min
0.2
3.4 ±0.1
4 ±0.1
1 min
1.5 ±0.1
1(27circuits 8mm pitch plugged up)
(2 circuits 8mm pitch with bosses)
6.4 ±0.1
2-4
1.5 ±0.1
1.7 ±0.1
Note: 1. Tolerances are for pattern non-cumulative: ±0.05mm for all centers. Tolerance for hole size is ±0.1.
2. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as guideline. Contact JST for details.
1
BH CONNECTOR
Contact
Applicable wire
mm2
AWG #
Model No.
SBH-001T-P0.5
0.08∼0.33
Q'ty /
reel
1.6 ∼2.4
4,000
28∼22
Material and Finish
7.35
2.2
Insulation O.D. (mm)
1.5
3.1
Phosphor bronze, tin-plated (reflow treatment)
1.5
1.6
RoHS compliance
Note: Wire conductors should be tin-plated annealed copper strands.
Applicator
Dies
Crimping
machine Crimp applicator
Contact
MKS-L
SBH-001T-P0.5 AP-K2N
* MKS-SC1-1
Crimp applicator with dies
MK/SBH/M-001-05 APLMK SBH/M001-05
SC/SBH/M-001-05 APLSC SBH/M001-05
Note: *Strip-crimp applicator
Housing
Circuits Pitch
(mm)
2 to 4 circuits
B
3.2
A
2
H JST
8.8
B
Q'ty /
bag
4.0
9.8
1,000
8 BHR-03VS-1
8.0
13.8
1,000
8.0
13.8
1,000
12.0
17.8
1,000
8.0
13.8
1,000
12.0
17.8
1,000
12.0
17.8
1,000
16.0
21.8
1,000
Note1) 8 4 Note2) 4 5.1
4
A
4 BHR-02VS-1
12 3
Dimensions (mm)
Model No.
4
4 5
4 BHR-02(8.0)VS-1N
BHR-04VS-1
BHR-03VS-1
BHR-03(4-3)VS-1N
BHR-04VS-1
BHR-05VS-1
2.2
Material
5 circuits
PA 66, UL94V-0, natural (white)
3.2
21.8
RoHS compliance
Note: 1. BHR-02(8.0)VS-1N: 2 circuits 8.0mm pitch plugged up.
2. BHR-03(4-3)VS-1N: 4 circuits 4.0mm pitch header with circuit No.3
plugged up.
5.1
8.8
H JST
2.2
4
16
18.4
19.6
Through-hole type shrouded header
Circuits Pitch (mm)
2
8
Model No.
S02(8.0)B-BHS
14
10.4
7.1
3
1
RoHS compliance This product displays (LF)(SN) on a label.
Note: The applicable housing is "BHR-02(8.0)VS-1N" only.
(3.2)
3.2
2
Material and Finish
Post: Copper alloy, copper-undercoated, tin-plated (reflow treatment)
Wafer: PA, UL94V-0, natural (ivory)
8
12
Q'ty / tray
1,000
（6.85）
BH CONNECTOR
SMT type shrouded header
(2 circuits 4mm pitch)
(2 circuits 8mm pitch)
10
14
6.4
7.1
3
10.4
1.5
8
7.1
3
1.5
3.2
3.2
4
(2 circuits 8mm pitch with bosses)
(2 circuits 8mm pitch plugged up)
Note 1)
Note 2)
14
10.4
14
3
7.1
10.4
1.5
3
8
7.1
1.5
3.2
3.2
8
5
12
(2 circuits 8mm pitch with ribs against prying)
(2 circuits 12mm pitch)
Note 4)
18
14
10.4
14.4
7.1
12
1.5
3
7.1
1.5
3.2
3.2
8
No.1
(3 circuits 4mm pitch)
(3 circuits 4mm pitch plugged up)
14
Note 3)
10.4
8
18
12
7.1
3
1.5
4
14.4
3
7.1
1.5
3.2
3.2
4
(4 circuits 4mm pitch)
18
14.4
12
4
8
2
Note1) 8
Note2) 8
Note4) 8
12
3
4
Note3) 4
4
4
5
Note5) 4
Model No.
SM02(4.0)B-BHS-1-TB
SM02(8.0)B-BHS-1-TB
SM02(8.0)B-BHS-TB
SM02(8.0)B-BHS-1N-TB
SM02(8.0)B-BHS-1R-TB
SM02(12)B-BHS-1-TB
SM03(4.0)B-BHS-1-TB
SM03(7-D1)B-BHS-1N-TB
SM04(4.0)B-BHS-1-TB
SM04(9-E2)B-BHS-1-TB
7.1
1.5
(4 circuits 4mm pitch with post removed)
Note 5)
22
18.4
16
12
Material and Finish
7.1
1.5
4
3.2
Post: Copper alloy, copper-undercoated, tin-plated (reflow treatment)
Wafer: PA, UL94V-0, natural (ivory)
Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment)
3
4
Q'ty / reel
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
3.2
Circuits Pitch(mm)
RoHS compliance This product displays (LF)(SN) on a label.
No.1
Note: 1. Header with bosses. Contact JST for other circuits headers with bosses.
2. 2 circuits 8.0mm pitch plugged up.
3. 4 circuits 4.0mm pitch header with circuit No.3 plugged up.
4. Header with ribs against prying. Contact JST for other circuits headers with ribs against prying.
5. 5 circuits 4.0mm pitch header with circuit No.3 post removed.
6. The products listed above are supplied on embossed tape.
7. Products with bosses supplied in loose piece are also available. Contact JST for details.
3