Chloride CP-70Z 31 AC UPS System
5 to 250kVA - 1ph output
The Chloride CP-70Z industrial
Uninterruptible Power Supply system
(UPS) is the flagship product of
Chloride Industrial Power. It combines
conservative design topology with
proven digital control technology to
offer the best performances in any
electrical and environmental condition.
The Chloride CP range is designed to meet
the stringent electrical and mechanical requirements in industrial environments.
Each Chloride CP product is based on
interchangeable sub-assemblies to allow full
customization, in compliance with client’s
technical specification and with project documentation requirements.
Benefits
n
n
n
Tailor made systems to comply with all
customer’s specifications.
Ruggedized solutions for demanding
environments: extended temperatures,
vibrations, dust, elevation, dripping water
and moisture.
Efficient maintenance thanks to easy frontaccess to all vital modules of the system.
Key Features
n
n
n
n
n
n
n
n
Reliability - Unique design which allows
the UPS to continuously operate for at least
20 years at full load at a permanent 40°C
ambient temperature.
On-line double conversion - UPS classified
VFI SS 111 as per IEC62040-3
Robust mechanical design - the system
withstands vertical and horizontal
acceleration stress tests up to 0.5g as
standard
Galvanic isolation –input and output
transformers as standard
Multilingual digital graphic display with
embedded event log
Remote monitoring capabilities: Modbus,
Profibus, DF1, ethernet, volt-free contact,
monitoring software
Fully customized electrical and mechanical
solutions – On demand design to comply
with every standards (e.g. UL, ANSI, NEMA,
IEC, CSA, ABS, DNV)
Full compatibility with lead-acid and nickelcadmium batteries sealed or vented
Applications
The Chloride CP-70Z AC UPS System range suits all
applications such as:
n Oil and Gas offshore and onshore
n Refining and petrochemical plants
n Power generation plants
n Transportation (rail, metro, tramway)
Industrial Power for
Business-Critical Continuity™
The Chloride CP range is designed to meet the harshest electrical and
mechanical requirements in industrial environments.
Each Chloride CP product is based on interchangeable sub-assemblies to allow
full customization, in compliance with client’s technical specification and with
project documentation requirements.
Associated with an industrial stand-by battery, the Chloride CP-70Z 31 range
is dedicated to protect critical industrial single phase AC equipments and
processes from the damaging effects of power interruption and losses.
Chloride CP-70Z 31 UPS System
Ratings - Output power (kVA) vs DC intermediate voltage (Vdc)
110–120Vdc
220-240Vdc
Technical Data
400Vdc
2.5
5
7.5
10
15
20
25
10
15
20
25
30
40
50
60
30
40
50
60
80
100
120
Up to 250 kVA on request
40
50
60
80
100
120
Options
Rectifier
Battery
System
Mechanical
Communication
12-pulse rectifier
Harmonic filter
Ripple filters
Blocking diode
Other input voltage (3x190 to 3x690VAC)
Inrush current limitation to 8In
Surge and Lightning protections
Battery circuit protection box
Battery cabinet
Low-voltage disconnect contactor
Battery Management System
Battery room temperature sensor
Dual configurations
Hot stand-by configuration
Input / intermediate /output isolators
DC/DC serial regulator
isolated DC/DC converter
AC distribution
Earth fault monitoring
Backfeed protection
Internal lighting
Anti-condensation heater
Temperature monitor
Special cabinet identification
Reserve transformer
Reserve stabilizer
Up to IP42 external
Top cable entry
Other frame colour
Anti-seismic design
Front-panel analog meters (72x72 class 1.5)
Transducers
Additional Volt-free contacts
Remote monitoring via Modbus
Remote monitoring via other bus
PPVis monitoring software
Passive or active mimic panel
Non-exhaustive list of options. Consult us for any other requirements.
Standards
Compliance
Conformity
IEC 62040 (-1, -2, -3) / 60146 (-1-1, -1-3, -2) / IEC 60950
IEC 61000-6-2 - IEC 61000-6-4
IEC 60529 / IEC 60439 / IEC 60076
Low voltage directive: 2006/95/EC
EMC directive: 2004/108/EC
CE Mark
Input
AC voltage
3 x 400V (380, 415)*
Voltage tolerance
Frequency
Frequency tolerance
Intermediate DC Circuit
Nominal DC voltage
Voltage stability
+/- 10%
50Hz (60Hz)
+/- 5%
Voltage ripple
1% RMS, in float, battery connected
Current limitation
I nominal
Charging characteristic
UI according to DIN 41773
Ouput
Available ratings
AC Voltage
Frequency
see table above (at PF 0.8 lagging)
1 x 230V (220, 240) ; 1 x 110V (115, 120)*
50Hz (60Hz)
110 / 120 / 220 / 240 / 400 V
+/- 1% in float mode, input within tolerance
+/-1.5% for parallel rectifiers
Frequency stability
•
with internal oscillator
•
with reserve synchronism
+/- 0.5%
+/-3% (from 0.2 to 6% adjustable)
Frequency response
<1Hz/s (0.1Hz/s for parallel systems)
Voltage stability (for 0-100% load variation)
•
static
•
dynamic
Overload inverter
•
1 minute
•
+/-1% (+/-2% for parallel systems)
+/-2% (+/-3% for parallel systems)
150% of nominal power
10 minutes
125% of nominal power
Short circuit clearance
•
100 ms
250% of nominal current
•
5s
Distortion
•
With 100% linear load
•
With 100% non-linear load
Allowable power factor
Allowable crest factor
Battery
Type
Autonomy
Battery current limitation
(typical, float & charge modes)
Battery current limitation
(typical, boost mode)
General Data
175% of nominal current
3%
Complies with IEC 62040-1-2
0.5 lagging to 0.5 leading
3
Lead Acid or Nickel Cadmium vented or
recombination
From few minutes to several hours, as per
customer’s requirement
0.1C (Lead Acid battery)
0.2C (Nickel Cadmium battery)
0.05C (Lead acid battery)
0.1C (Nickel Cadmium battery)
Operating temperature
0 to 40°C*
Storage temperature (°C)
-20 to +70°C
Relative humidity (%)
<90% non condensing
Operating altitude (m)
1000 m max without derating
Cooling
Forced ventilation
Efficiency
Up to 90% according to rating
External protection
IP 20* according to IEC 60529
Noise (dB)
60 – 75 dB according to rating
Frame colour
Grey RAL 7032
Dimensions
Varying according to ratings & options
* other available on request
Emerson Network Power.
The global leader in enabling
Business-Critical Continuity™.
n AC Power
n Connectivity
n DC Power
n Embedded Computing
Emerson Network Power IS S.A.S
30 Avenue Montgolfier - BP90 - 69684 Chassieu Cedex France
T: +33 (0)4 78 40 13 56 F: +33 (0)4 78 90 58 90
Industrial.Sales.Chloride@Emerson.com
EmersonNetworkPower.com
n Embedded Power
n Industrial Power
n Infrastructure Management & Monitoring
n Outside Plant
n Power Switching & Controls
n Precision Cooling
n Racks & Integrated Cabinets
n Services
Emerson, Business-Critical Continuity and
Emerson Network Power are trademarks of
Emerson Electric Co. or one of its affiliated companies.
©2013 Emerson Electric Co.
CP70Z 31 AC UPS System-DSUK-Rev2-02/2013
While every precaution has been taken to ensure the accuracy and completeness of this literature, Emerson Network power assumes no responsability and disclaims all liability for damages resulting from use of this information or for any errors or
omissions.
Industrial Power for
Business-Critical Continuity™
5 to 250 kVA - 1ph output