2015 Catalog
TASHJIAN TOWERS CORPORATION
2765 S. Temperance Avenue, Fowler, Ca 93625
Office: (559) 834-4300 Fax: (559) 834-4377
Email: tashjian@msn.com Web:www. tashtowers.com
Table of Contents
Introduction……………….……………….………………..1
Engineering Services………………………………….…….3
Guyed and Stacked T-Tower……………….…………….…7
Self-Support Towers……………………………………….23
Tower Trailers……………………………………………...49
Monopoles………………………………………………….62
Stealth Towers……………………………………….…..…65
Construction ………………………………………….…….68
Crank-Up Towers..……………………….………….….…69
Terms and Conditions…………………………………..….91
TASHJIAN TOWERS CORPORATION
2765 S. Temperance Avenue, Fowler, Ca 93625
Office: (559) 834-4300 Fax: (559) 834-4377
Email: tashjian@msn.com Web: www.tashtowers.com
Introduction
Since 2001, Tashjian Towers has designed and manufactured towers for the communication industry. The corporate
objective has remained to provide professionally engineered high quality towers to our customers with their budgets and
schedule.
Tashjian Towers began engineering and manufacturing towers for the amateur radio operators and has since developed its
business to include towers for the much larger market of telecommunications. This catalog covers engineering service,
manufactured products and construction service available from Tashjian Towers Corporation.
How to use this Catalog
The purpose of this catalog is to provide our customers with a detailed list of the services and products which Tashjian
Towers can provide. The catalog is separated into different divisions, engineering, crank-up towers, stack towers, selfsupporting towers, tower trailers, poles, and accessories. All parts are identified by part numbers and all part number are
cross-referenced to the price list. From the catalog the customer will be able to determine the towers capacity and price.
The delivery time for your tower is available by placing a call to Tashjian Towers Sales Department.
The customer may select a standard tower kit for some of the Tashjian Towers models. For each of the standard tower kits,
Tashjian Towers has assigned a part number. The part number may be used to cross-reference between the catalog
information and the price list. For each standard tower kit, a detailed bill of material can be provided. For many of standard
tower kits, the maximum allowable projected area which the tower will hold is given for an 85 MPH 3-second gust wind
speed and a 100 MPH 3-Second Gust wind speed. These projected areas shown are for budgetary purposes and does not
include areas of ladders, cables, antenna mounts, cable ladders, platforms, or any other appurtenances. In the event there
may be a question of compliance in the design of a standard catalog tower to state, local, building regulations, or building
codes, blueprints and engineering design calculations for your particular site can be supplied at a moderate charge.
History of Towers at Tashjian Towers
Tashjian Towers Corporation has three divisions to the business. The primary focus is to provide professional engineering
services. The manufacturing division is the second division, which provides towers. The third division is the construction
division which installs foundation and erects towers.
Karl Tashjian, owner of Tashjian Towers, worked at Tri-Ex Tower Corporation from 1985 to 2000. While at Tri-Ex, Karl
was the engineer of record for hundreds of towers and worked on tower designs for the various tower models shown in this
catalog.
In 1997, International Tower Inc. was formed from Tri-Ex Towers and S&G Communication. ITI specialized in tall towers
for the broadcast industry. While at ITI, the engineering group engineered and designed several candelabrum towers
approximately 2,000 feet tall, an 1860' tower with a 10' face width in Louisiana, a 1,000 foot tall candelabrum in
downtown
Atlanta guyed at 35%, along with many other tall heavy towers.
In January of 2000, Spectra Site Broadcast group purchased International Tower Inc. Spectra Site closed the engineering
offices at the Tri-Ex plant in Visalia in October of 2000, at which time Karl began consulting full time. The old Tri-Ex
Towers Corporation was dissolved in California, so Karl incorporated as Tri-Ex Towers Corporation in California in Jan.
2002. In Jan. 2003, the name of the corporation was changed to Tashjian Towers Corporation.
In 2010, Tashjian Towers built a 21,000 square foot factory with an additional 2,400 square foot engineering office on 2
acres in Fowler, California.
1
Tashjian Towers Corporation Commercial Tower Division
Tashjian Towers Corporation commercial tower business is organized into eight distinct groups. The groups are Sales,
Engineering, Production Control, Fabrication, Weld, Paint, Assembly, and Quality Control. All Tashjian Towers are made
in Fowler, California, USA. When a customer calls in to place an order for parts by part number, the sales personnel can
determine the delivery date for your product. If the project requires Tashjian Towers to size the tower for the customer,
sales will take the required data and forward onto the engineering department for design review. The custom tower design
requires from 5 to 7 days to complete, depending on specifications provided by the customer. Sales will send a written
quotation via email or fax with scheduled delivery dates. If requesting a hard copy, it shall be mailed.
When the sales department receives a purchase order or verbal notice to proceed, a sales order is written and passed on to
the production control department. The production control department will request the drawing package from the
engineering department. When production control logs the sales order a scheduled ship date will be set. The customer will
be advised of this ship date if different from our quotation. The production control department will purchase the raw
material and purchase parts required to fill the order. The raw material used in Tashjian Towers meets various standards
including American Standard Testing, and Measurement, ASTM, standards. The leg material of the stack and selfsupporting tower are high strength steel with a minimum yield of 50,000 psi. Brace material conforms to ASTM A36.
Production control will issue work orders to the shop to complete the sales order.
The fabrication and weld departments convert the raw material into the black tower. The fabrication department cuts,
torches, mills, turns, punches, drills, grinds, etc. the raw material per the drawings while welding uses the GMAW process.
Tashjian Towers is particularly proud of the quality of the welding from our weld department. All welders at Tashjian
Towers Corporation have American Welding Society, AWS, certification for each process performed at Tashjian Towers.
All weld procedures used by Tashjian Towers are qualified by AWS.
After welding, the black towers are shipped to the galvanizer. Tashjian Towers transports the towers to galvanizers who
are members of the Hot Dipped Galvanizer Associations. All galvanize conforms to ASTM standards.
The galvanized towers are packaged for shipment by the assembly department. On request, towers can be painted by
Tashjian Towers. FAA factory applied paint is available on request.
Quality Control at Tashjian Towers is staffed to meet the requirements of Accreditation Criteria for Fabricator
Inspection Programs for Structural Steel per AC172. At all phases of manufacture, quality control checks are made to
assure adherence to drawings and specifications. Shipment of towers is accomplished by one of two methods. The first and
most common method of shipment is for Tashjian Towers to prepay the freight and bill the customer. The second method
is cash on delivery. Larger shipments are sent on dedicated trucks while smaller loads are shipped on common carrier.
2
TASHJIAN TOWERS CORPORATION
ENGINEERING SERVICES
Tashjian Towers specializes in tower Engineering, Inspection, Mapping, Documentation,
Analysis, Co-Location, Foundation Design and Geotechnical services. For your review, we have
enclosed a partial list of our services along with associated costs.
Tower Analysis:
It is assumed that the owner provides all available information. The scope of this work consists
of a feasibility study for the installation of customer specific equipment on existing towers. The
scope of work includes providing four sets of tower elevations drawings, four sets of tower
calculations for the complete tower including the foundation, and four copies of the tower report
summarizing the tower findings and recommendations. The report includes tower overstresses if
found but does not include the details of the modification to correct these overstresses. Once the
owner decides to proceed with the modification, structural calculations are prepare, modification
drawings are created, and an estimate of the steel require to modify the tower is produced. The
above documentation will be sealed if the tower site is within the one of the states our engineers
are licensed: California, Oregon, Arizona, Nevada, Washington, Utah, Texas, Idaho, New
Mexico, and Alaska.
Up to 100'
100' to 200'
200' plus
Pole, Self-Support and Guyed Towers
Pole, Self-Support and Guyed Towers
Self-Support and Guyed Towers
$1,400
$1,800
$2,200 & up
Tower Inspection, Tower Mapping, and Tower Documentation
$1,200 per Site
The scope of work for inspection, mapping, and documentation includes the measuring of
member sizes, documenting the antenna sizes, antenna elevation, antenna line sizes and location
on tower, guy geometry, visual inspection of the tower, photos of the tower, and field report.
The client receives a copy of the field inspection notes and photos if requested. The scope
includes conducting field investigation and collecting engineering data.
3
Tower Foundation Plans (Standard Plans): $1,500 per Tower
Soils report is to be provided by owner or the foundation design will be based on normal soil.
The scope of work includes providing four sets of calculations and drawings for the tower
foundations including optimizing the size for the tower; reinforcement bars location, size, and
weight: anchor bolt locations, in conformance with a customer provided soils report. These
standard foundation plans are for standard tower foundations types such as pads, drill and bell
foundations, pad to pier, and straight piers.
Custom Tower Foundation Design (Rock Anchor, Water, Others):
$2,500
The scope of work includes providing four sets of tower foundation plans for custom tower
foundation where rock, water, or other soil conditions other than normal soil conditions exists.
Tower Design: $90 per hour
The design team has many years of experience in designing and modifying towers. The typical
design cyclical includes layout, design review, fabrication details, submittal of sealed drawing
package, and construction drawing package. The design team has completed a wide range of
towers including custom crank up towers, self-supporting towers to 400’, guy tower to 2000’,
tower trailer units, roof top mounts, stealth designs including water tanks, pine and palm trees,
and windmill towers, custom equipment platforms, and custom antenna mounts.
As a tower manufacturer, our design team is aware of the requirements of owners, fabricators,
and contractors. Our drawing package are used for obtaining building permits, construction bid
walks, construction documents, owners records, fabricator details including weld design, and
managers who want their projects on time. We are experience in weld design, galvanized
structures, and their effect on warping structures.
The design work is done using Cadkey or Solidworks cad software. Autocad formats and
electronic files can be provided on completion. Full size prints are available on request while
11 x 17 is the normal format.
Tower Site Plans: $2,500 per plus all expenses
The scope of work includes taking survey information, customer supplied data, zoning
information and creating a site plan showing all existing and proposed structures. An elevation
drawing of the tower is shown on the site plan. Typically these plans are used in the permit
process.
4
Soils Engineering- Customers scope of work for Geotechnical
Services: $3,400 Each
This includes all items described in the typical geotechnical specifications. For your information,
the price includes two borings, one direct shear test, one consolidation test, five each moisture
samples, one chemical analysis, resistivity testing and sieve analysis. The resistivity test adds
approximately $500 to the cost above. Four copies of the report will be provided.
Other Geotechnical Tests available are:
Additional borings (after 2)
Atterberg Limits
Direct Shear Test
Moisture Density
Unconfined Compression Test
Bulk samples for sites requiring cut and fill
Installation of Observation Wells
Rock Coring with ROD results
Consolidation Test
Chemical Analysis
Unconsolidated Undrained Triaxial Shear Test
Consolidated Undrained Triaxial Shear Test
California Bearing Ratio or R Value
Expansion Index Test
Consolidated Drained Triaxial Test
Additional Copies of Report Sealed
$250 per
$125 per
$150 per
$25 per
$100 per
$25 each
$500 per well 20' deep
$500 per foot
$150 each
$75 each
$500 each
$625 each
$175 each
$150 each
$660 each
$50 per
Please note the above work does not include rock conditions, four-wheel access, or other
abnormal soil conditions. The above report is quoted assuming normal soil per TIA/EIA RS 222
Revision G. Normal access is assumed in the above pricing.
Other engineering services available are lease exhibits, tower expert at zoning hearings, public
works counter service in central California, minor electrical plans, communication building
design, communication equipment slab design, review of manufactures drawings and sealing of
plans, obtaining quotes for tower construction work, and tower specification writing. Fees may
vary depending on complexities.
Thank you for the opportunity to be of service.
Respectfully,
Karl K. Tashjian
Owner, Tashjian Towers, RCE
5
6
Guyed and Stacked T-Towers
7
TT-15
TECHNIICAL DATA
A SHEET

Generall purpose com
mmunicationns tower. (V
VHF, UHF, M
Microwave, aand Two Waay)

ble in heightss from 10 ft. to 140 ft. (A
Always referr to exact insstallation datta)
Availab

which call foor low cost aand brute
Designeed and fabriccated for the tough jobs w
strength
h.

W” bracing cconfigurationn. Resists cloockwise and
Utilizes superior “W
countter-clockwisse torsional lloads.

Generall Dimensionss:
o Face
F
Width: 13 7/8"
o Side
S Rails: 1 1/4" O.D. x .083" Wall
o Bracing:
B
5/16
6" solid rod

Greater strength and
d loading cappabilities unnheard of in tthe economiical tower
class.

Comparre construction details annd you will ssee the big aadvantage off the model
“15”.

Design eliminates sp
pecial top annd base sectiions
Constru
uction: builtt in precisionn jigs and eleectrically weelded by cerrtified
personn
nel.
Finish: hot dip galv
vanized afterr Fabricationn.
Weight: 50 lb. (per section)
i
No jaamming durring installation.
Joints: splice tube inserts.
The informa
ation contain
ned on this ddrawing or ddata sheet is the propertyy of
Tashjian To
owers Corpo
oration, and cannot be reeproduced of used withoout the
written perm
mission of Tashjian
Ta
Tow
wers Corporaation as it ref
efers to patennt
applicationss submitted or in preparration.
8
9
10
T
T-220
TECHNIC
CAL DATA
A SHEET

Available in
n heights fro
om 10 ft. to 2220 ft.

perior “W” bracing
b
confiiguration whhich resists toorsional loadds.
Utilizes sup

mensions:
General Dim
o Face Width:
W
19 13//16"
o Legs: 1 1/2” x .120
0" wall
o Bracing
g:7/16" Solid Rod


ns: Antenna radiator
r
– innsulated basee available.
Application
Microwave support, VH
HF-UHF trannsmitting, anntenna suppoort and tropoo Scatter
Systems.

Designed fo
or truly difficcult and dem
manding jobss.
CONSTRU
UCTION: Built in precission jigs andd electricallyy welded by certified
personnel.
FINISH: Hot
H dipped gaalvanized aft
fter fabricatioon.
WEIGHT: 205 lbs. (20
0 ft. section) , 107 lbs. (10 ft. section))
JOINTS: Square
S
heavy
y duty easilyy aligned flannges.
The informa
ation contain
ned on this ddrawing or ddata sheet is the propertyy of
Tashjian To
owers Corpo
oration, and cannot be reeproduced of used withoout the
written perm
mission of Tashjian
Ta
Tow
wers Corporaation as it ref
efers to patennt
applicationss submitted or in preparration.
11
12
13
T
T-26
TECHNIC
CAL DATA
A SHEET

Available in heights from 10 ft. tto 600 ft. (Too 400 feet w
with excellennt
Rigidity)).

Utilizes superior
s
“W
W” bracing coonfiguration which resistts torsional
clockwisse and counteer-clockwisee loads.

General dimensions:
d
o Face Width: 26 5/16”
5
o Legs: 2" x Variab
ble wall thicckness
o Braciing: 5/8" sollid rod

Applications: antenn
na radiator - iinsulated baase available, high rigiditty
Microwaave Support, VHF-UHF transmittingg, antenna suupport and trropo
Scatter Systems.
S

Designed
d for truly diifficult and ddemanding jobs.
Construction: Built in precisionn jigs and eleectrically weelded by certtified
personneel.
Finish: hot
h dip galvaanized after fabrication.
Weight: 400 lbs. Av
verage (20 ft . section) 2000 lbs. Averrage (10 ft. section)
Joints: square
s
heavy
y duty easilyy aligned flannges.
The
T informattion contained on this drrawing or daata sheet is tthe propertyy of
Tashjian
T
Tow
wers Corporration, and ccannot be repproduced off used withouut the
written
w
perm
mission of Ta
ashjian Toweers Corporattion as it reffers to patent
applications
a
submitted or
o in preparaation.
14
15
16
T
T-366
TECHNICAL DATA SHEET

ned specificaally for micrrowave and hheavy duty
Design
commu
unications innstallations.

Constrruction: the T
T-36 Series T
Tower is connstructed in an equilaterral
triangle with tubullar steel legs and cross bracing.

The cross section ssize is 42 3/88" on leg cennters. Diameeter of leg
section
ns varies from
m 2" to 2 1/22” to meet innstallation reequirements.
Cross bracing
b
is boolted to legs.

Finish:: all tower coomponents aare completeely hot dippeed galvanized
after faabrication.

Appliccations: desiggned for largge guy comm
munications uses;
microw
wave, CATV
V, AM-FM B
Broadcast.

Also fo
or self-suppoorting installlations up too 80 feet.
The infformation coontained on this drawingg or data sheeet is the
properrty of Tashjiaan Towers C
Corporation, and cannott be
reprod
duced of usedd without thee written perrmission of T
Tashjian
Towerss Corporatioon as it referrs to patent aapplicationss submitted
or in preparation.
p
17
18
19
T--48
TE
ECHNICAL
L DATA SH
HEET

Designeed specificallly for microowave and heeavy duty
communications insstallations.

Constru
uction: the T
T-48 Series T
Tower is connstructed in aan
equilateeral triangle with tubularr steel legs aand cross braacing.

The cro
oss section siize is 55" onn leg centers.. Diameter oof leg
sectionss varies from
m 2 1/2" to 3 1/2” to meeet installationn
requirem
ments. Crosss bracing is bbolted to leggs.

Finish: All Tower C
Components are complettely hot dippped
galvanizzed after fabbrication.

Applicaations: Desiggned for largge guy comm
munications uuses;
microw
wave, CATV,, AM-FM Brroadcast.

Also forr self-supporrting installaations up to 100 feet.

Models: T-48 is thee standard Toower Sectionn
T-48X
X Utilizes X
X-Bracing (as requireed basis)
formation conntained on thhis drawing or data sheeet is the
The info
property
ty of Tashjiann Towers Coorporation, aand cannot bbe
reprodu
uced of usedd without the written perm
mission of T
Tashjian
Towers Corporationn as it referss to patent appplications ssubmitted
or in prreparation.
20
21
22
Self-Supporting Towers
23
TKD Series
 Designed specifically for VHF/UHF, various
microwave and heavy duty communications
installations.
 Construction: The TKD Series Tower is constructed
in a tubular steel leg configuration. The use of angle
or pipe bracing is dependent on required tower
sections. The face width and leg size at the base
varies depending on section required.
 Finish: All tower components are completely hot
dipped galvanized after fabrication.
 Standard TKD series tower heights range from 40
feet to 200 feet.
 Our Engineering staff is ready to develop any
custom design for your specific need. Contact our
sales representative.
The information contained on this drawing of data sheet is the property of Tashjian
Towers Corporation. And cannot be reproduced or used without the written permission of
Tashjian Towers Corporation. As it refers to patent applications submitted or in
preparation.
24
25
26
2765 S Temperance Ave, Fowler, Ca 93625
2765 S Temperance Ave, Fowler, Ca 93625
27
TKD Self Supporting Tower
Light and Medium Tower
If Wind Speed = 70 mph per EIA
If Wind Speed = 70 mph per UBC
If Wind Speed = 100 mph per EIA
If Wind Speed = 100 mph per UBC
150-30100
Ant. Area =>
Ant. Area =>
Ant. Area =>
Ant. Area =>
0
0
805 sq ft
570 sq ft
354 sq ft
238 sq ft
0
0
0
1000 sq ft
678 sq ft
450 sq ft
285 sq ft
40 ft (M)
1
0
1
347 sq ft
209 sq ft
147 sq ft
86 sq ft
60 ft (L)
0
1
0
490 sq ft
310 sq ft
214 sq ft
129 sq ft
60 ft (M)
1
0
1
320 sq ft
196 sq ft
128 sq ft
70 sq ft
80 ft (L)
0
1
0
459 sq ft
283 sq ft
196 sq ft
107 sq ft
80 ft (M)
1
0
1
300 sq ft
189 sq ft
117 sq ft
63 sq ft
100 ft (L)
0
1
0
422 sq ft
270 sq ft
190 sq ft
102 sq ft
100 ft (M)
Quantities Required for the Following Different Height
TKD-301, 20’ Section Assy
150-30200
0
Part No.
1
TKD-302, 20’ Section Assy
150-30267
1
No. Description
2
TKD-302XX, 20’ Section Assy
1
40 ft (L)
3
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
1
0
0
0
0
1
0
0
0
0
0
0
150-30300
0
0
0
0
0
0
0
TKD-303, 20’ Section Assy
1
1
0
0
0
0
0
3
4
150-30430
0
0
0
0
0
0
3
1
0
TKD-304X, 20’ Section Assy
150-30500
0
0
0
0
0
3
1
0
0
6
TKD-305, 20’ Section Assy
150-30647
0
0
0
0
3
1
0
0
7
TKD-306X, 20’ Section Assy
150-30700
0
0
0
3
1
0
1
0
8
TKD-307, 20’ Section Assy
150-30801
0
0
3
1
0
1
0
9
TKD-308X, 20’ Section Assy
150-30900
0
3
1
0
1
0
10
TKD-309, 20’ Section Assy
160-31006-1
3
1
0
1
1
11
TKD-310, 20’ Section Assy
200-00415
1
0
1
0
12
TKD-301-304, Top Cap Assy
150-35010
0
1
150-30400
13
Anchor Bolt Kit #1 (3/4” x 48”)
150-35046
1
TKD-304, 20’ Section Assy
14
Anchor Bolt Kit #2 (1.0” x 48”)
1
5
15
968-30000
2945
2556
3151
3839
4761
5449
7041
150-85022 150-85023 150-85024 150-85025 150-85026
BGK #3, Base Grounding Kit
2463
150-85019 150-85020 150-85021
16
Tower Part Number
Tower Weight
28
29
Ant. Area =>
Ant. Area =>
Ant. Area =>
Ant. Area =>
150-30100
150-30200
150-30267
150-30300
150-30400
150-30430
150-30500
150-30647
150-30700
150-30801
150-30900
160-31006-1
200-00415
150-35010
150-35046
968-30000
If Wind Speed = 100 mph per EIA
If Wind Speed = 70 mph per UBC
If Wind Speed = 70 mph per EIA
TKD-301, 20’ Section Assy
TKD-302, 20’ Section Assy
TKD-302XX, 20’ Section Assy
TKD-303, 20’ Section Assy
TKD-304, 20’ Section Assy
TKD-304X, 20’ Section Assy
TKD-305, 20’ Section Assy
TKD-306X, 20’ Section Assy
TKD-307, 20’ Section Assy
TKD-308X, 20’ Section Assy
TKD-309, 20’ Section Assy
TKD-310, 20’ Section Assy
TKD-301-304, Top Cap Assy
Anchor Bolt Kit #1 (3/4” x 48”)
Anchor Bolt Kit #2 (1.0” x 48”)
BGK #3, Base Grounding Kit
Tower Part Number
Tower Weight
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
18
19
Part No.
If Wind Speed = 100 mph per UBC
No. Description
1
0
1
3
0
0
0
1
1
1
1
0
1
0
1
0
407 sq ft
248 sq ft
178 sq ft
92 sq ft
120 ft (M)
1
0
1
3
0
0
0
1
1
1
1
0
1
1
0
1
269 sq ft
162 sq ft
88 sq ft
44 sq ft
140 ft (L)
7729
9539
10227
150-85027 150-85028 150-85029
1
0
1
3
0
0
0
0
1
1
1
0
1
1
0
1
285 sq ft
168 sq ft
107 sq ft
50 sq ft
120 ft (L)
1
1
0
3
0
0
1
1
1
1
1
0
1
1
0
1
256 sq ft
150 sq ft
83 sq ft
35 sq ft
160 ft
13391
13319
150-85030 150-85031
1
0
1
3
0
0
1
1
1
1
1
0
1
1
1
0
392 sq ft
240 sq ft
173 sq ft
82 sq ft
140 ft (M)
1
1
0
3
1
1
1
1
1
1
1
0
1
1
0
1
225 sq ft
132 sq ft
70 sq ft
28 sq ft
200 ft
17587
22066
150-85032 150-85033
1
1
0
3
0
1
1
1
1
1
1
0
1
1
0
1
243 sq ft
141 sq ft
77 sq ft
31 sq ft
180 ft
Quantities Required for the Following Different Height
Light and Medium Tower
TKD Self Supporting Tower
K-Series Towers
 Construction: The K-Series Towers are
constructed with pipe legs angle braces, 3 or 4
sided.
 Finish: All tower components are completely hot
dipped galvanized after fabrication.
 Standard K series tower heights are 80’, 100’ or
120’.
 Our Engineering staff is ready to develop any
custom design for your specific need. Contact our
sales representative.
The information contained on this drawing of data sheet is the property of
Tashjian Towers Corporation. And cannot be reproduced or used without the
written permission of Tashjian Towers Corporation. As it refers to patent
applications submitted or in preparation.
30
K-Series Towers
Elevation View
(K-120 Shown)
31
Plan View
----20’
-----40’
------60’
------80’
Section 1----
------100’
-------80’
-------60’
-----20’
------40’
K-100
Section 2-----
Section 3------
Section 4-------
Section 5-------
K-Series Towers
Section 4------
Section 3------
Section 2-----
Section 1----
K-80
Section 6-------
Section 5-------
Section 4-------
Section 3------
Section 2-----
-----120’
-----100’
------80’
------60’
K-120
32
Guyed and Self-Supporting
Tower Accessories
Waveguide Ladder
Climb Ladder
Anti-Climb
Side Arm Antenna Mount
Dish
Mount
33
Price List
Guy and Self-Supporting Towers and Accessories
34
Tower Price List
Description
Part No.
MODEL T-15 SECTIONS
T-15 Standard 10’ Sections
115-0
T-15 Top Plate
115-0
T-15 Flat Base
115-00304
T-15 Concrete Base
115-0
T-15 Tapered Base Mount
115-00324
T-15 Tilt Base
115-00422
T-15 Mast Plate
115-0
T-15 CDR Plate
115-0
T-15 Guy Bracket
115-0
T-15 Guy Bracket w/ Torque Bar
T-15 Torque Arm Assembly
115-0
T-15 2" Dish Mount
115-0
T-15 4" Dish Mount
115-0
T-15 Erection Fixture
115-0
MODEL T-15 GUY TOWER KITS
T-15 40’ Guy Tower Kit
T-15 50’ Guy Tower Kit
T-15 60’ Guy Tower Kit
T-15 70’ Guy Tower Kit
T-15 80’ Guy Tower Kit
T-15 90’ Guy Tower Kit
T-15 100’ Guy Tower Kit
T-15 110’ Guy Tower Kit
T-15 120’ Guy Tower Kit
T-15 130’ Guy Tower Kit
T-15 140’ Guy Tower Kit
MODEL T-20 SECTIONS
T-20-120, 5’ Section
T-20-120, 10’ Section
T-20-120, 20’ Section
T-20-180, 20’ Section Heavy
T-20-180, 20’ Section Heavy (G)
T-20 Concrete Base Mount (G)
T-20 Flat Base Mount
T-20 Tapered Base Mount
T-20 Top Cap
220-0
T-20 Top Plate
220-0
T-20 Beacon Plate
T-20 Mast Anchor Plate
T-20 Guy Bracket
T-20 Guy Bracket w/Torque Bars
T-20 Torque Arm Assembly
T-20 Mast Flange
T-20 Dish Mount
220-0
220-0
220-0
0301
0303
220-0
220-00513
220-00323
220-0
220-0
220-0
220-0
220-0
220-0
$162.00
$75.00
$69.00
$75.00
$241.00
$183.00
$57.00
$63.00
$40.00
$89.00
$177.00
$109.00
$175.00
$217.00
0424
0425
0426
0427
0428
0429
0430
0431
0432
0433
0434
362
422
474
526
586
638
690
742
802
854
906
$1,906.00
$2,404.00
$2,662.00
$2,919.00
$3,487.00
$3,755.00
$4,024.00
$4,299.00
$4,980.00
$5,088.00
$5,552.00
0338
0504
0503
0505
220-00577
0516
64
112
207
313
335
60
75
122
2
42
39
18
33
41
89
18
102
$241.00
$375.00
$635.00
$916.00
$1,002.00
$234.00
$249.00
$575.00
$12.00
$137.00
$119.00
$81.00
$132.00
$137.00
$275.00
$63.00
$312.00
0307
0308
0325
115-00326
0311
0327
0375
0312
220-0
220-0
35
Price
52
10
18
20
46
27
7
6
8
14
46
26
48
40
0305
115-0
115-0
115-0
115-0
115-0
115-0
115-0
115-0
115-0
115-0
115-0
Weight (lb)
0512
0517
0305
0306
0308
0511
0310
0528
0312
Tower Price List
Description
Part No.
Weight (lb)
MODEL T-20 GUY TOWER KITS
T-20 40’ Guy Tower Kit
T-20 50’ Guy Tower Kit
T-20 60’ Guy Tower Kit
T-20 70’ Guy Tower Kit
T-20 80’ Guy Tower Kit
T-20 90’ Guy Tower Kit
T-20 100’ Guy Tower Kit
T-20 110’ Guy Tower Kit
T-20 120’ Guy Tower Kit
T-20 130’ Guy Tower Kit
T-20 140’ Guy Tower Kit
T-20 150’ Guy Tower Kit
T-20 160’ Guy Tower Kit
T-20 170’ Guy Tower Kit
T-20 180’ Guy Tower Kit
T-20 190’ Guy Tower Kit
T-20 200’ Guy Tower Kit
T-20 210’ Guy Tower Kit
T-20 220’ Guy Tower Kit
220-00554
220-00555
220-00556
220-00557
220-00558
220-00559
220-00560
220-00561
220-00562
220-00563
220-00564
220-00565
220-00566
220-00567
220-00568
220-00569
220-00570
220-00571
220-00572
622
734
862
974
1069
1181
1378
1490
1585
1697
1825
1937
2032
2177
2272
2384
2479
2678
2773
$2,324.00
$2,667.00
$3,234.00
$3,594.00
$3,875.00
$4,224.00
$5,049.00
$5,409.00
$5,707.00
$6,056.00
$6,720.00
$7,098.00
$7,384.00
$8,174.00
$8,455.00
$8,849.00
$9,141.00
$10,349.00
$10,647.00
MODEL T-20 SELF SUPPORTING TOWER KITS
T-20 10’ Self Supporting Tower Kit
T-20 20’ Self Supporting Tower Kit
T-20 30’ Self Supporting Tower Kit
T-20 40’ Self Supporting Tower Kit
220-00574
220-00547
220-00575
220-00548
171
266
171
266
$567.00
$807.00
$1,562.00
$1,826.00
MODEL T-26 SECTIONS
T-26 10’ Section .120 Wall
T-26 20’ Section .120 Wall
T-26 20’ Section .120 Wall (G)
T-26 10’ Section .180 Wall
T-26 20’ Section .180 Wall
T-26 20’ Section .120 Wall (G)
T-26 10’ Section .250 Wall
T-26 20’ Section .250 Wall
T-26 20’ Section .250 Wall (G)
T-26 Concrete Base
T-26 Flat Base Mount
T-26 Tapered Base Mount
T-26 Top Plate
226-0
T-26 Top Cap
226-0
T-26 Beacon Plate
226-0
T-26 Guy Bracket
226-0
T-26 Guy Bracket w/Torque Bars
T-26 Torque Arm Assembly
226-0
T-26 5’ Standard Mast Flange
226-0
T-26 Dish Mount
226-0
226-00404
226-00402
226-00359
226-00403
226-00401
226-00360
226-00406
226-00405
226-00250
226-00307
226-00426
226-00322
0311
0308
0418
0317
226-00319
0408
0409
0414
191
337
340
228
411
425
261
477
490
117
156
210
64
4
64
35
50
109
18
113
$533.00
$994.00
$1105.00
$786.00
$1,418.00
$1,836.00
$978.00
$1,645.00
$1,395.00
$450.00
$303.00
$675.00
$160.00
$12.00
$160.00
$114.00
$166.00
$327.00
$98.00
$330.00
36
Price
Tower Price List
Description
Part No.
Weight (lb)
Price
MODEL T-26-120 SELF SUPPORTING TOWER KITS
T-26-120 20’ Self Supporting Tower Kit
T-26-120 30’ Self Supporting Tower Kit
T-26-120 40’ Self Supporting Tower Kit
T-26-120 50’ Self Supporting Tower Kit
T-26-120 60’ Self Supporting Tower Kit
226-00500
226-00501
226-00502
226-00503
226-00504
628
819
1053
1244
1390
$1,884.00
$2,448.00
$3,159.00
$3,670.00
$4,170.00
MODEL T-26-180 SELF SUPPORTING TOWER KITS
T-26-180 20’ Self Supporting Tower Kit
T-26-180 30’ Self Supporting Tower Kit
T-26-180 40’ Self Supporting Tower Kit
T-26-180 50’ Self Supporting Tower Kit
T-26-180 60’ Self Supporting Tower Kit
226-00505
226-00506
226-00507
226-00508
226-00509
563
754
900
1091
1325
$1,978.00
$2,639.00
$3,159.00
$3,807.00
$4,650.00
MODEL T-26-250 SELF SUPPORTING TOWER KITS
T-26-250 20’ Self Supporting Tower Kit
T-26-250 30’ Self Supporting Tower Kit
T-26-250 40’ Self Supporting Tower Kit
T-26-250 50’ Self Supporting Tower Kit
T-26-250 60’ Self Supporting Tower Kit
226-00510
226-00511
226-00512
226-00513
226-00514
488
679
825
1016
1162
$1,621.00
$2,464.00
$2,953.00
$3,637.00
$4,867.00
0315
0438
0434
0306
0427
0322
0426
215
262
296
317
348
373
425
425
510
607
632
722
744
758
193
404
5
40
32
90
447
168
21
$630.00
$692.00
$935.00
$935.00
$1,061.00
$1,108.00
$1,254.00
$1,228.00
$1.504.00
$1,790.00
$1,864.00
$2,129.00
$2,194.00
$2,213.00
$569.00
$1,191.00
$17.00
$206.00
$177.00
$265.00
$1318.00
$495.00
$131.00
MODEL T-36 LIGHT SELF SUPPORTING TOWER KITS
T-36 20’ Light Self Supporting Tower Kit
236-00507
T-36 30’ Light Self Supporting Tower Kit
236-00508
658
868
$1,866.00
$2,519.00
MODEL T-36 SECTIONS
T-36 Standard 9’ Section
236-0
T-36X. X-Braced 9’ Section
236-00418
T-36H, Heavy Duty 9’ Section
236-0
T-36HX, Heavy Duty, X-Braced 9’Section
T-36EH, Extra Heavy Duty 9’ Section
T-36EHX, Extra Heavy Duty X-Braced 9’ Section
T-36 Standard 20’ Section
236-0
T-36 Standard 20’ Section
236-0
T-36X, X-Braced 20’ Section
236-00411
T-36H, Heavy Duty, 20’ Section
236-0
T-36HX, Heavy Duty, X-Braced 20’ Section
T-36EH, Extra Heavy Duty 20’ Section
T-36EHX, Extra Heavy X-Braced 20’ Section
T-36EHX (G), Ex Heavy X-Braced 20’ Section
T-36 Concrete Base
236-0
T-36 Tapered Base Mount
236-00314
T-36 Top Caps
236-0
T-36 Top Plate
236-0
T-36 Beacon Plate
236-0
T-36 Guy Bracket
236-0
T-36 Torque Arm Assembly
236-0
T-36 Dish Mount
236-0
T-36 5’ Mast Flange
236-0
37
0402
0404
236-00432
236-00407
236-00433
0401
0401
0401-2
236-00412
236-00401-3
236-00415
236-00424
0422
Tower Price List
Description
Part No.
Weight (lbs)
Price
T-36 40’ Light Self Supporting Tower Kit
T-36 50’ Light Self Supporting Tower Kit
T-36 60’ Light Self Supporting Tower Kit
T-36 70’ Light Self Supporting Tower Kit
T-36 80’ Light Self Supporting Tower Kit
236-00509
236-00510
236-00511
236-00512
236-00513
1056
1308
1626
1836
2024
$3,009.00
$3,924.00
$4,799.00
$5,509.00
$5,566.00
MODEL T-36 MEDIUM SELF SUPPORTING TOWER KITS
T-36 20’ Medium Self Supporting Tower Kit
236-00514
T-36 30’ Medium Self Supporting Tower Kit
236-00515
T-36 40’ Medium Self Supporting Tower Kit
236-00516
T-36 50’ Medium Self Supporting Tower Kit
236-00517
T-36 60’ Medium Self Supporting Tower Kit
236-00518
T-36 70’ Medium Self Supporting Tower Kit
236-00519
T-36 80’ Medium Self Supporting Tower Kit
236-00520
863
1092
1303
1667
1878
2275
2611
$2,589.00
$3,221.00
$3,836.00
$4,884.00
$5,540.00
$6,825.00
$7,833.00
MODEL T-36 HEAVY SELF SUPPORTING TOWER KITS
T-36 20’ Heavy Self Supporting Tower Kit
236-00521
T-36 30’ Heavy Self Supporting Tower Kit
236-00522
T-36 40’ Heavy Self Supporting Tower Kit
236-00523
T-36 50’ Heavy Self Supporting Tower Kit
236-00524
T-36 60’ Heavy Self Supporting Tower Kit
236-00525
T-36 70’ Heavy Self Supporting Tower Kit
236-00526
T-36 80’ Heavy Self Supporting Tower Kit
236-00527
998
1296
1643
2054
2401
2624
2896
$2,994.00
$3,888.00
$4,929.00
$6,059.00
$7,082.00
$7,740.00
$8,544.00
MODEL T-48 SECTIONS
T-48 Standard 9’ Section
248-0
T-48X, X-Braced 9’ Section
248-00409
T-48H, Heavy Duty 9’ Section
248-0
T-48HX, Heavy Duty X-Braced 9’ Section
T-48EH, Extra Heavy Duty 9’ Section
T-48EHX, Extra Heavy X-Braced 9’ Section
T-48 Standard 20’ Section
T-48X, X-Braced 20’ Section
T-48H, Heavy Duty 20’ Section
T-48HX, Heavy Duty, X-Braced 20’ Section
T-48EH, Extra Heavy Duty 20’ Section
T-48EHX, Extra Heavy Duty, X-Braced 20’ Sect.
T-48EHX (G), Extra Heavy Duty X-Braced 20’ Section.
T-48 Concrete Base
T-48 Tapered Base Mount
T-48 Top Cap
T-48 Beacon Plate
T-48 Guy Bracket
T-48 Torque Arm Assembly
T-48 Dish Mount
T-48 5’ Mast Flange
338
377
387
426
462
500
668
763
778
874
943
1039
1048
253
619
7
36
104
657
184
25
$997.00
$1,131.00
$1,180.00
$1,256.00
$1,386.00
$1,535.00
$1,970.00
$2,250.00
$5,165.00
$2,578.00
$2,876.00
$3,002.00
$3,071.00
$809.00
$1,857.00
$23.00
$177.00
$330.00
$2,299.00
$542.00
$138.00
0402
0404
248-00411
248-00407
248-00413
248-00401
248-00408
248-00403
248-00410
248-00406
248-00412
248-00418
248-00405
248-00313
248-00417
248-00431
248-00428
248-00420
248-00309
248-00416
38
Tower Price List
Description
Part No.
Weight (lb)
MODEL T-48 LIGHT SELF SUPPORTING TOWER KITS
T-48 20’ Light Self Supporting Tower Kit
T-48 30’ Light Self Supporting Tower Kit
T-48 40’ Light Self Supporting Tower Kit
T-48 50’ Light Self Supporting Tower Kit
T-48 60’ Light Self Supporting Tower Kit
T-48 70’ Light Self Supporting Tower Kit
T-48 80’ Light Self Supporting Tower Kit
T-48 90’ Light Self Supporting Tower Kit
T-48 100’ Light Self Supporting Tower Kit
248-00460
248-00461
248-00462
248-00463
248-00464
248-00465
248-00466
248-00467
248-00468
972
1310
1640
2184
2514
2947
3277
3615
3945
$2,673.00
$3,602.00
$4,838.00
$6,442.00
$7,416.00
$8.941.00
$9,334.00
$10,664.00
$11,628.00
MODEL T-48 MEDIUM SELF SUPPORTING TOWER KITS
T-48 20’ Medium Self Supporting Tower Kit
248-00469
T-48 30’ Medium Self Supporting Tower Kit
248-00470
T-48 40’ Medium Self Supporting Tower Kit
248-00471
T-48 50’ Medium Self Supporting Tower Kit
248-00472
T-48 60’ Medium Self Supporting Tower Kit
248-00473
T-48 70’ Medium Self Supporting Tower Kit
248-00474
T-48 80’ Medium Self Supporting Tower Kit
248-00475
T-48 90’ Medium Self Supporting Tower Kit
248-00476
T-48 100’ Medium Self Supporting Tower Kit
248-00477
972
1444
1830
2453
2783
3216
2878
4090
4420
$2,868.00
$4,259.00
$5,398.00
$7,236.00
$8,209.00
$9,48700
$8,490.00
$12,065.00
$13,039.00
MODEL T-48 HEAVY SELF SUPPORTING TOWER KITS
T-48 20’ Heavy Self Supporting Tower Kit
248-00478
T-48 30’ Heavy Self Supporting Tower Kit
248-00479
T-48 40’ Heavy Self Supporting Tower Kit
248-00480
T-48 50’ Heavy Self Supporting Tower Kit
248-00481
T-48 60’ Heavy Self Supporting Tower Kit
248-00482
T-48 70’ Heavy Self Supporting Tower Kit
248-00483
T-48 80’ Heavy Self Supporting Tower Kit
248-00484
T-48 90’ Heavy Self Supporting Tower Kit
248-00485
T-48 100’ Heavy Self Supporting Tower Kit
248-00486
972
1555
1941
2603
2989
3477
3863
4477
4807
$2,770.00
$4,431.00
$5,531.00
$7,418.00
$8,518.00
$9,905.00
$11,809.00
$12,714.00
$13,699.00
TKD-301 SECTIONS
TKD-301 Standard Section
TKD-301 Bottom Section
TKD-301 Top Section
TKD-301X Standard Section Heavy
TKD-301X Bottom Section Heavy
TKD-301X Top Section Heavy
TKD-301SN 10’ Section
TKD-301SN 20’ Section
150-30100
150-30105
150-30130
150-30140
150-30145
150-30135
150-30164
150-30153
526
526
558
612
612
649
265
492
$1,446.00
$1,446.00
$1,534.00
$1,683.00
$1,683.00
$1,785.00
$999.00
$1,353.00
TKD-302 SECTIONS
TKD-302 Standard Section
TKD-302 Bottom Section
TKD-302 Top Section
TKD-302X Standard Section Heavy
TKD-302X Bottom Section Heavy
150-30200
150-30215
150-30210
150-30255
150-30260
688
688
729
773
773
$1,892.00
$1,892.00
$2,004.00
$2,133.00
$2,133.00
39
Price
Tower Price List
Description
Part No.
Weight (lb)
Price
TKD-302X Top Section Heavy
TKD-302SN 10’ Straight & Narrow Section
TKD-302SN 20’Straight & Narrow Section
150-30250
150-30230
150-30273-01
819
354
644
$2,252.00
$1,210.00
$1,771.00
TKD-303 SECTIONS
TKD-303 Standard Section
TKD-303 Bottom Section
TKD-303 Top Section
TKD-303X Standard Section Heavy
TKD-303X Bottom Section Heavy
TKD-303X Top Section Heavy
TKD-303SN 10’ Straight & Narrow Section
TKD-303SN 20’ Straight & Narrow Section
150-30300
150-30315
150-30305
150-30361
150-30362
150-30311
150-30345
150-30373
1020
1020
1081
1150
1150
1219
487
918
$2,805.00
$2,805.00
$2,972.00
$3,162.00
$3,122.00
$3,352.00
$1,495.00
$2,616.00
TKD-304 SECTIONS
TKD-304 Standard Section
TKD-304 Bottom Section
TKD-304 Top Section
TKD-304X Standard Section Heavy
TKD-304X Bottom Section Heavy
TKD-304X Top Section Heavy
150-3
TKD-304SN 10’ Straight & Narrow Section
TKD-304SN 20’ Straight & Narrow Section
150-30400
150-30415
150-30405
150-30430
150-30416
0456
150-30472
150-30481
1175
1175
1246
1283
1283
1360
730
1180
$3,231.00
$3,231.00
$3,421.00
$4,811.00
$4,811.00
$3,740.00
$2,007.00
$3,245.00
TKD-305 SECTIONS
TKD-305 Standard Section
TKD-305 Bottom Section
TKD-305X Standard Section Heavy
TKD-305X Bottom Section Heavy
150-30500
150-30515
150-30552
150-30553
1610
1610
1875
1875
$4,427.00
$4,427.00
$5,156.00
$5,156.00
TKD-306 SECTIONS
TKD-306 Standard Section
TKD-306 Bottom Section
TKD-306X Standard Section Heavy
TKD-306X Bottom Section Heavy
150-30600
150-30615
150-30647
150-30648
2120
2120
2280
2280
$5,830.00
$5,830.00
$6,270.00
$6,270.00
0700
150-30715
150-30723
150-30724
2498
2498
2762
2762
$6,829.00
$6,829.00
$7,595.00
$7,595.00
150-30800
150-30825
150-30801
150-30816
2754
2754
3002
3002
$7,573.00
$7,573.00
$8,255.00
$8,255.00
TKD-307 SECTIONS
TKD-307 Standard Section
TKD-307 Bottom Section
TKD-307X Standard Section Heavy
TKD-307X Bottom Section Heavy
TKD-308 SECTIONS
TKD-308 Standard Section
TKD-308 Bottom Section
TKD-308X Standard Section Heavy
TKD-308X Bottom Section Heavy
150-3
40
Tower Price List
Description
Part No.
Weight (lb)
TKD-309 SECTIONS
TKD-309 Standard Section
TKD-309 Bottom Section
TKD-309X Standard Section Heavy
TKD-309X Bottom Section Heavy
150-30900
150-30915
150-30901
150-30916
4268
4268
4830
4830
$11,523.00
$11523.00
$12,800.00
$12,800.00
TKD-310 SECTIONS
TKD-310 Standard Section
TKD-310 Bottom Section
TKD-310X Standard Section Heavy
TKD-310X Bottom Section Heavy
150-31006-1
150-31006-3
150-31006-2
150-31006-4
4479
4479
5068
5068
$11,869.00
$11,869.00
$13,436.00
$13,436.00
TKD-311 SECTIONS
TKD-311 Standard Section
TKD-311 Bottom Section
TKD-311X Standard Section Heavy
TKD-311X Bottom Section Heavy
150-32001-1
150-32005
150-32001-2
150-32006
4810
4479
5380
5380
$12,746.00
$12,093.00
$14,257.00
$14,257.00
TKD-401 SECTIONS
TKD-401 Standard Section
TKD-401 Bottom Section
TKD-401 Top Section
TKD-401X Standard Section Heavy
TKD-401X Bottom Section Heavy
TKD-401X Top Section Heavy
TKD-401SN 10’ Section
TKD-401SN 20’ Section
150-30147
150-30148
150-30146
150-30150
150-30151
150-30149
150-30166
150-30167
701
701
743
816
816
865
353
656
$2,103.00
$2,103.00
$2,229.00
$2,407.00
$2,407.00
$2,551.00
$1,041.00
$1,962.00
TKD-402 SECTIONS
TKD-402 Standard Section
TKD-402 Bottom Section
TKD-402 Top Section
TKD-402X Standard Section Heavy
TKD-402X Bottom Section Heavy
TKD-402X Bottom Section Heavy
TKD-402SN 10’ Strt & Narrow Sec
TKD-402SN 20’ Strt & Narrow Sec
150-30262
150-30263
150-30261
150-30265
150-30266
150-30266
150-30280
150-30277
917
917
972
1031
1031
1031
472
859
$2,751.00
$2,751.00
$2,916.00
$3,093.00
$3,093.00
$3,093.00
$1,534.00
$2,748.00
TKD-403 SECTIONS
TKD-403 Standard Section
TKD-403 Bottom Section
TKD-403 Top Section
TKD-403X Standard Section Heavy
TKD-403X Bottom Section Heavy
TKD-403X Top Section Heavy
TKD-403SN 10’ Strt & Narrow Sec
TKD-403SN 20’ Strt & Narrow Sec
150-30364
150-30365
150-30363
150-30367
150-30368
150-30366
150-30342
150-30332
1360
1360
1442
1533
1533
1625
649
1224
$4,812.00
$4,812.00
$4,253.00
$4,522.00
$4,522.00
$4,075.00
$4,002.00
$3,774.00
41
Price
Tower Price List
Description
Part No.
Weight (lb)
Price
TKD-404 SECTIONS
TKD-404 Standard Section
TKD-404 Bottom Section
TKD-404 Top Section
TKD-404X Standard Section Heavy
TKD-404X Bottom Section Heavy
TKD-404X Top Section Heavy
TKD-404SN 10’ Strt & Narrow Sec
TKD-404SN 20’ Strt & Narrow Sec
150-30458
150-30459
150-30457
150-30461
150-30462
150-30460
150-30426
150-30467
1567
1567
1661
1711
1711
1813
973
1573
$4,701.00
$4,701.00
$4,983.00
$5,047.00
$5,047.00
$5,348.00
$2,919.00
$4,640.00
0554
0555
0557
0558
2147
2147
2500
2500
$6,333.00
$6,333.00
$7,325.00
$7,325.00
TKD-406 SECTIONS
TKD-406 Standard Section
TKD-406 Bottom Section
TKD-406X Standard Section Heavy
TKD-406X Bottom Section Heavy
150-30649
150-30650
150-30651
150-30653
2827
2827
3040
3040
$8,339.00
$8,339.00
$8,664.00
$8,664.00
TKD-407 SECTIONS
TKD-407 Standard Section
TKD-407 Bottom Section
TKD-407X Standard Section Heavy
TKD-407X Bottom Section Heavy
150-30726
150-30727
150-30729
150-30730
3331
3331
3683
3683
$9,493.00
$9,493.00
$10,496.00
$10,496.00
TKD-408 SECTIONS
TKD-408 Standard Section
TKD-408 Bottom Section
TKD-408X Standard Section Heavy
TKD-408X Bottom Section Heavy
150-30726-2
150-30727-2
150-30729-2
150-30730-2
3672
3672
4003
4003
$10,465.00
$10,465.00
$11,001.00
$11,001.00
TKD-409 SECTIONS
TKD-409 Standard Section
TKD-409 Bottom Section
TKD-409X Standard Section Heavy
TKD-409X Bottom Section Heavy
150-30726-3
150-30727-3
150-30729-3
150-30730-3
5691
5691
6440
6440
$15,650.00
$15,650.00
$17,066.00
$17,066.00
TKD-410 SECTIONS
TKD-410 Standard Section
TKD-410 Bottom Section
TKD-410X Standard Section Heavy
TKD-410X Bottom Section Heavy
150-30726-4
150-30727-4
150-30729-4
150-30730-4
5972
5972
6757
6757
$17,020.00
$17,020.00
$18,581.00
$18,581.00
TKD-405 SECTIONS
TKD-405 Standard Section
TKD-405 Bottom Section
TKD-405X Standard Section Heavy
TKD-405X Bottom Section Heavy
150-3
150-3
150-3
150-3
42
Tower Price List
Description
TKD-411 SECTIONS
TKD-411 Standard Section
TKD-411 Bottom Section
TKD-411X Standard Section Heavy
TKD-411X Bottom Section Heavy
Part No.
150-3
150-3
150-3
150-3
MODEL TKD SELF SUPPORTING TOWER KITS
TKD-303 (L) 40’ Self Supporting Tower Kit
TKD-304 (M) 40’ Self Supporting Tower Kit
TKD-303 (L) 60’ Self Supporting Tower Kit
TKD-304X (M) 60’ Self Supporting Tower Kit
TKD-304X (L) 80’ Self Supporting Tower Kit
TKD-305 (M) 80’ Self Supporting Tower Kit
TKD-305 (L) 100’ Self Supporting Tower Kit
TKD-306X (M) 100’ Self Supporting Tower Kit
TKD-306X (L) 120’ Self Supporting Tower Kit
TKD-307 (M) 120’ Self Supporting Tower Kit
TKD-307 (L) 140’ Self Supporting Tower Kit
TKD-308X (M) 140’ Self Supporting Tower Kit
TKD-308X (L) 160’ Self Supporting Tower Kit
TKD-309 180’ Self Supporting Tower Kit
TKD-310 200’ Self Supporting Tower Kit
K-SERIES TOWERS
Call for Pricing
43
0726-5
0727-5
0729-5
0730-5
150-85019
150-85020
150-85021
150-85022
150-85023
150-85024
150-85025
150-85026
150-85027
150-85028
150-85029
150-85030
150-85031
150-85032
150-85033
Weight (lb)
Price
6413
6413
7173
7173
$16,699.00
$16,699.00
$19,725.00
$19,725.00
2463
2945
2556
3151
3839
4761
5449
7041
7729
9539
10227
13391
13319
17587
22066
$7,635.00
$9,129.00
$7,923.00
$9,768.00
$11,900.00
$14,759.00
$16,619.00
$21,475.00
$23,573.00
$29,093.00
$30,783.00
$40,173.00
$40,622.00
$53,640.00
$66,639.00
Tower Price List - Accessories
Booms
Description
Part No.
LATTICE TYPE
#5 Boom Section, 20 ft
900-0
Front Antenna Mount for #5 Boom
T-20 Boom Section, 20 ft
220-0
T-20 Boom Section, 10 ft
220-0
Standard Antenna Mount (#5&T-20 Booms)
Mount Kit, #5/T-20 Boom, for 2.5
Mount Kit, #5/T-20 Boom, for 3.0
Mount Kit, #5/T-20 Boom, for 4.0
Mount Kit, #5/T-20 Boom, for 6.0
Mount Kit, #5/T-20 Boom, for 1.5
Mount Kit, #5/T-20 Boom, for 2.0
Front Antenna Mount for T-20 Boom
0420
0450
0301
0302
900-00451
0453
0454
0469
0470
0471
0472
220-00530
145
28
168
306
14
38
39
42
46
35
36
29
$507.00
$125.00
$655.00
$994.00
$64.00
$159.00
$152.00
$168.00
$170.00
$145.00
$147.00
$150.00
901-00405
901-00409
901-00411
901-00415
901-00419
901-00430
901-00432
901-00433
901-00434
901-00437
901-00438
901-00441
901-00444
901-00445
901-00446
901-00447
901-00449
901-00451
901-00453
901-00467
901-00468
901-00469
901-00471
901-00478
901-00481
42
56
62
72
81
196
60
86
41
53
58
37
35
70
76
74
47
57
29
49
79
55
66
85
77
$166.00
$224.00
$240.00
$280.00
$320.00
$784.00
$240.00
$344.00
$164.00
$212.00
$232.00
$146.00
$140.00
$280.00
$304.00
$286.00
$188.00
$228.00
$116.00
$200.00
$320.00
$220.00
$264.00
$340.00
$300.00
SIDE ARM
Boom SA-6-1, for 2.0" Pipe Tower Leg
Boom SA-8-1, for 3.0" Pipe Tower Leg
Boom SA-8-2, for 3.0" Pipe Tower Leg
Boom SA-10-2, for 3.0" Pipe Tower Leg
Boom SA-12-2, for 3.0" Pipe Tower Leg
Boom SA-14-2, for 2.0" Pipe Tower Leg
Boom SA-8-2, for 2.5" Pipe Tower Leg
Boom SA-14-2, for 2.5" Pipe Tower Leg
Boom SA-6-1, for 2.0" Tube Tower Leg
Boom SA-8-1, for 2.0" Pipe Tower Leg
Boom SA-8-2, for 2.0" Pipe Tower Leg
Boom SA-4-1, for 3.0" Pipe Tower Leg
Boom SA-4-1, for 2.5" Pipe Tower Leg
Boom SA-10-2, for 2.5" Pipe Tower Leg
Boom SA-12-2, for 2.0" Tube Tower Leg
Boom SA-12-2, for 1.5" Tube Tower Leg
Boom SA-6-1, for 3.0" Pipe Tower Leg
Boom SA-8-2, for 2.0" Tube Tower Leg
Boom SA-6-1, for 1.5" Tube Tower Leg
Boom SA-6-2, for 2.0" Tube Tower Leg
Boom SA-12-2, for 2.5" Pipe Tower Leg
Boom SA-8-1, for 2.5" Pipe Tower Leg
Boom SA-10-1, for 3.0" Pipe Tower Leg
Boom SA-14-2, for 2.0" Tube Tower Leg
Boom SA-12-2, for 2.0" Pipe Tower Leg
900-0
900-0
900-0
900-0
900-0
900-0
900-0
44
Weight (lbs)
Price
Booms
Description
Part No.
Weight (lb)
901-00482
901-00483
901-00484
901-00485
901-00487
901-00489
901-00490
901-00491
901-00492
901-00493
901-00494
901-00495
901-00496
901-00497
901-00498
29
45
50
59
65
50
52
53
65
68
90
32
31
51
61
SIDE ARM
Boom SA-4-1, for 1.5" Tube Tower Leg
Boom SA-6-1, for 2.5" Pipe Tower Leg
Boom SA-8-1, for 1.5" Tube Tower Leg
Boom SA-10-1, for1.5" Pipe Tower Leg
Boom SA-10-1, for 2.5" Pipe Tower Leg
Boom SA-6-2, for 2.0" Pipe Tower Leg
Boom SA-6-2, for 2.5" Pipe Tower Leg
Boom SA-6-2, for 3.0" Pipe Tower Leg
Boom SA-10-2, for 1.5" Tube Tower Leg
Boom SA-10-2, for 2.0" Pipe Tower Leg
Boom SA-14-2, for 3.0" Pipe Tower Leg
Boom SA-4-1, for 2.0" Pipe Tower Leg
Boom SA-4-1, for 2.0" Pipe Tower Leg
Boom SA-8-1, for 2.0" Tube Tower Leg
Boom SA-10-1, for 2.0" Pipe Tower Leg
Price
$116.00
$186.00
$200.00
$256.00
$260.00
$200.00
$210.00
$218.00
$266.00
$275.00
$360.00
$128.00
$124.00
$204.00
$244.00
TKD Antenna Mounts
Description
Part No.
TKD TAPERED DISH MOUNTS
Dish Mount Assembly for 2.0" Pipe Leg
Dish Mount Assembly for 2.5" Pipe Leg
Dish Mount Assembly for 3.0" Pipe Leg
Dish Mount Assembly for 6.0" Pipe Leg
Dish Mount Assembly for 4.0" Pipe Leg
200-00403
200-00406
200-00408
200-00445
200-00448
24
25
26
34
29
$195.00
$205.00
$215.00
$236.00
$223.00
TKD TAPERED FACE DISH MOUNTS
Dish Mount Assembly for TKD-301 Face
Dish Mount Assembly for TKD-302 Face
Dish Mount Assembly for TKD-303 Face
Dish Mount Assembly for TKD-304 Face
Dish Mount Assembly for TKD-305 Face
Dish Mount Assembly for TKD-306 Face
Dish Mount Assembly for TKD-307 Face
Dish Mount Assembly for TKD-308 Face
Dish Mount Assembly for TKD-309 Face
200-00577
200-00578
200-00529
200-00526
200-00486
200-00570
200-00488
200-00489
200-00579
302
322
343
364
388
388
405
420
430
$996.00
$1,032.00
$1,093.00
$1,164.00
$1,241.00
$1,241.00
$1,296.00
$1,325.00
$1,350.00
45
Weight (lb)
Price
Tower Price List - Accessories
TKD Antenna Mounts
Description
Part No.
TKD 2' ONE ARM ANTENNA MOUNTS
Antenna Mount Assembly for 4.0" Pipe Leg
Antenna Mount Assembly for 3.0" Pipe Leg
Antenna Mount Assembly for 2.5" Pipe Leg
Antenna Mount Assembly for 2.0" Tube Leg
Antenna Mount Assembly for 6.0" Pipe Leg
150-65010
150-65011
150-65022
150-65024
200-00479
46
42
39
36
51
$184.00
$168.00
$156.00
$144.00
$204.00
TKD 5' TWO ARM ANTENNA MOUNTS
Antenna Mount Assembly for 2.0" Pipe Leg
Antenna Mount Assembly for 3.0" Pipe Leg
Antenna Mount Assembly for 2.5"Pipe Leg
Antenna Mount Assembly for 4.0" Pipe Leg
200-00496
200-00466
200-00467
200-00469
104
114
109
119
$416.00
$456.00
$436.00
$476.00
0560
0561
0562
0563
200-00564
210
200
205
215
200
$840.00
$800.00
$820.00
$860.00
$800.00
97
125
$255.00
$360.00
TKD V-MOUNTS
V-Mount Assembly for 4.0" Pipe Leg
V-Mount Assembly for 2.5 Pipe Leg
V-Mount Assembly for 3.0" Pipe Leg
V-Mount Assembly for 6.0" Pipe Leg
V-Mount Assembly for 2.5" Str Pipe Leg
200-0
200-0
200-0
200-0
Weight (lb)
Price
Waveguide Ladders
W.G. LADDERS
Waveguide Ladder Assembly, 12" x 20'
Waveguide Ladder Assembly, 24" x 20'
W.G. LADDERS MOUNTING KITS
Mount Kit #2 (2 1/2"- 3" angle)
Mount Kit #1 (1 1/8"-2" angle)
Mount Kit #3 (3 l/2"-4" angle)
Splice Plate, Waveguide Ladder
Splice Plate, 5° angle Waveguide Ladder
Waveguide Ladder Assembly, 24"x10'
Waveguide Ladder Assembly, 24" x 20'
Waveguide Ladder Assembly, 48" x 10'
Waveguide Ladder Assembly, 48" x 20'
902-00421-1
902-5001
902-00420
902-00544
902-00545
902-3
000
902-3002
904-0
0419
904-00420
904-00421
904-00422
46
19
18
20
4
4
274
549
408
803
$21.
$1,0
$57.00
$54.00
$60.00
00
$27.00
96.00
$2,196.00
$1,600.00
$2,450.00
Tower Price List - Accessories
Waveguide Ladders
Description
LADDERS
Climb Ladder, 16"x20'
Climb Ladder, 16"x10'
Part No.
081-4
081-4
LADDERS MOUNTING KITS
Splice Kit, 5° Angle
916-0
Base Kit
916-00407
TKD Leg Mounting Kit (2.0" pipe)
TKD Leg Mounting Kit (2.5" pipe)
TKD Leg Mounting Kit (3.0" pipe)
TKD Leg Mounting Kit (4.0" pipe)
TKD Leg Mounting Kit (6.0" pipe)
TKD Face Mounting Kit (1/2" hardware)
TKD Face Mounting Kit (5/8" hardware)
TKD Face Mounting Kit (2.0" horizontal pipe)
TKD Face Mounting Kit (2.5" horizontal pipe)
TKD Face Mounting Kit (3.0" horizontal pipe)
SAFETY CLIMB
Safety Climb Cable (per foot)
Safety Climb Kit for Ladder
Price
000
001
75
37
$325
$195
.00
.00
0404
4
12
22
24
26
29
38
15
15
16
17
18
$27.
$40.00
00
-----
$1.68
$595.00
916-00634
916-00635
916-00636
916-00637
916-00638
916-00639
916-00640
916-00641
916-00642
916-00643
084-0020
084-0024
Weight (lb)
$92.00
$97.00
$100.00
$105.00
$110.00
$43.00
$43.00
$50.00
$51.00
$54.00
TKD INSIDE MOUNTING KIT REQUIRES ENGINEERING AVAILABLE UPON REQUEST
47
/Foot
Tower Price List - Accessories
Anchor Bolt Kits
Description
Part No.
Anchor Bolt Kit 3/4" x 48" 7.0" sq
Anchor Bolt Kit 3/4" x 48" 8.0” sq.
Anchor Bolt Kit 7/8" x 48" 10.5” sq
Anchor King Kit 1.0" x 48" 10.5" sq
Anchor Bolt Kit 5/8" x 48" 5.5” sq
150-35010
150-35042
150-35045
150-35046
150-35047
Weight (lbs)
110
140
185
200
90
Price
$610.00
$812.00
$1,110.00
$1,180.00
$540.00
Grounding Kits
Base Grounding Kit W/1 Rod - BGK-1
Base Grounding Kit W/2 Rods- BGK-2
Base Grounding Kit W/3 Rods- BGK-3
Base Grounding Kit W/4 Rods- BGK-4
968-5001
968-5002
968-5003
968-5004
$95.00
$145.00
$175.00
$220.00
Guying Hardware
GUY GRIPS (GALVANIZED)
Guy Grip, 3/16"
051-0
Guy Grip, 1/4"
051-0
Guy Grip, 5/16"
051-0
Guy Grip, 3/8"
051-0
Guy Grip, 5/8"
051-0
Guy Grip, 1/2"
051-0
Guy Grip, 9/16"
051-0
340
345
350
355
360
365
370
0.8
1
1.1
1.3
6.5
3.1
4.8
$50.00
$5.50
$6.80
$11.50
$44.06
$18.00
$30.00
THIMBLES (GALVANIZED) PACK OF 5
Thimble, 3/16" Standard Galvanized
051-0
Thimble, 1/4" Standard Galvanized
051-0
Thimble, 5/16 Galvanized
051-0
Thimble, 3/8" Galvanized
051-0
Thimble, 1/2" Galvanized
051-0
Thimble, 9/16" Galvanized
051-0
Thimble, 5/8" Galvanized
051-0
405
435
450
455
460
465
470
0.125
0.1875
0.1875
0.3125
0.625
0.75
1.25
$0.116
$0.134
$1.35
$3.60
$3.80
$8.30
$8.30
SHACKLES (GALVANIZED)
Shackle, 3/8" Galvanized
Shackle, 7/16" Galvanized
Shackle, 1/2" Galvanized
Shackle, 5/8" Galvanized
Shackle, 3/4" Galvanized
260
265
270
275
320
0.25
0.38
0.7
1.5
2.32
$4.55
$4.10
$5.02
$9.25
$18.50
0.76
2.06
3.78
$16.35
$10.48
$9.075
TURNBUCKLES (GALVANIZED)
Turnbuckle, 3/8 x 6
054-1
Turnbuckle, 1/2" x 12" Jaw and Jaw
Turnbuckle, 5/8" x 12" Jaw & Jaw
051-0
051-0
051-0
051-0
051-0
3061
054-14121
48
054-0005
TASHJIAN TOWERS
TOWER/TRAILER
UNITS
49
CT-33 TOWER
TRAILER UNIT
TOWER TYPE: Self-supporting, extendable, manual crank-up tower.
SPECIFICATIONS:
TOWER HEIGHT: Extended 33 feet. Retracted 13 feet.
TOWER SUPPORT: Self-supporting, with guys for pointing accuracy.
WIND LOADING: Engineering analysis indicates the tower will support 20 square feet of projected area at
winds of 85 MPH 3 second gust wind per ANSI/TIA EIA RS 222 Rev G.
DEAD LOAD: The maximum dead load is 300 lbs.
SECTIONS: The tower is made from 4 each 10 foot welded sections #5, #6, #7 and #8.
DESCRIPTION:
Tower is complete with 40:1 gearbox, drum and hoisting cables, and an upright tilt winch. The tower is
designed to extend the tower telescopic sections uniformly.
The tower has pulley frames on two faces. The lifting cable is 1/4 x 7 x 19 aircraft cable.
Because of high strength tubing and the bracing of solid rod, this design is considered to be the strongest
engineering configuration for towers, yet saves weight, resists torsion load and reduces wind resistance,
allowing more useful load to be installed on the tower.
TRAILER TYPE: Single axle equipped with a
system of stabilizing and leveling.
SPECIFICATIONS:
TRAILER SIZE: 7’-5" wide x 17’-7" long
TRAILER CAPACITY: 6,000lbs
GROSS VEHICLE WEIGHT: 2,250 lbs with
Tower
DESCRIPTION:
The single axle trailer has electric brakes, clearance lights,
tail lights, turn signals, brake lights, a tbd pin connection to
tow vehicle, adjustable lunette eye attachment ring.
The trailer is equipped with an 18 x 18 x 30 inch tool
storage box for the storage of pins, tools, racket straps, and
other items. There are 4 guy cable reels, which store the guy
cables and are mounted on each of the 4 outriggers.
50
CT-50 TOWER
TRAILER UNIT
TOWER TYPE: Self-supporting, extendable, manual crank-up tower.
SPECIFICATIONS:
TOWER HEIGHT: Extended 55 feet. Retracted 21 feet.
TOWER SUPPORT: Self-supporting, with guys for pointing accuracy.
WIND LOADING: Engineering analysis indicates the tower will support 20 sq ft of
projected area at winds of 85
MPH 3 second gust wind per ANSI/TIA EIA RS 222 Rev G.
DEAD LOAD: The maximum dead load is 300 lbs.
SECTIONS: The tower is made from 3 each 20 foot welded sections #6, #7 and #8.
DESCRIPTION:
Tower is complete with 40:1 gearbox, drum and hoisting cables, and an upright tilt
winch. The tower is designed to extend the tower telescopic sections uniformly.
The tower has pulley frames on two faces. The lifting cable is 1/4 x 7 x 19 aircraft
cable. Because of high strength tubing and the bracing of solid rod, this design is
considered to be the strongest engineering configuration for towers, yet saves weight,
resists torsion load and reduces wind resistance, allowing more useful load to be
installed on the tower.
TRAILER TYPE: Single axle equipped with a system of stabilizing and leveling.
SPECIFICATIONS:
TRAILER SIZE: 7’-5" wide x 17’-7" long
TRAILER CAPACITY: 6,000lbs
GROSS VEHICLE WEIGHT: 3,000 lbs with Tower
DESCRIPTION:
The single axle trailer has electric brakes, clearance lights, tail lights, turn
signals, brake lights, a tbd pin connection to tow vehicle, adjustable lunette eye
attachment ring.
The trailer is equipped with an 18 x 18 x 30 inch
tool storage box for the storage of pins, tools,
racket straps, and other items. There are
4 guy cable reels, which store the guy
cables and are mounted on
each of the 4 outriggers.
51
CT-70 TOWER
TRAILER UNIT
TOWER TYPE: Self-supporting, extendable, manual crank-up tower.
SPECIFICATIONS:
TOWER HEIGHT: Extended 69 feet (70 feet from the ground). Retracted 25’-6”.
TOWER SUPPORT: Trailer mounted tower with (1) top level of guy cables.
WIND LOADING: Engineering analysis indicates the tower will support 17
square feet of projected area at winds of 85 MPH 3 second gust wind per
ANSI/TIA EIA RS 222 Rev G.
DEAD LOAD: The maximum dead load is 500 lbs.
GROSS VEHICLE WEIGHT: 3,500 lbs with tower
SECTIONS: The tower is made from 4 each 20 foot welded sections #5, #6, #7
and #8.
DESCRIPTION:
Tower is complete with 40:1 gearbox, drum and hoisting cables, and an upright
tilt winch. The tower is designed to extend the tower telescopic sections uniformly.
The tower has pulley frames on two faces. The lifting cable is 1/4 x 7 x 19
aircraft cable. Because of high strength tubing and the bracing of solid rod, this
design is considered to be the strongest engineering configuration for towers, yet
saves weight, resists torsion load and reduces wind resistance, allowing more useful
load to be installed on the tower.
TRAILER TYPE: Single axle equipped with a system of stabilizing and leveling.
SPECIFICATIONS:
TRAILER SIZE: 7’-5" wide x 17’-7" long
TRAILER CAPACITY: 6,000 lbs
DESCRIPTION:
The single axle trailer has electric brakes, clearance lights, tail lights, turn
signals, brake lights, a tbd pin connection to tow vehicle, adjustable lunette eye
attachment ring.
The trailer is equipped with an
18 x 18 x 30 inch tool storage box
for the storage of pins, tools, racket
straps, and other items. There are
4 guy cable reels, which store
the guy cables and are
mounted on each of
the 4 outriggers.
52
CT-85 TOWER
TRAILER UNIT
TYPE: Tower, Guyed, Extendable, Motorized.
SPECIFICATIONS:
TOWER HEIGHT: Extended 84’ (85’ from the ground). Retracted 26 feet.
TOWER SUPPORT: Trailer mounted tower with (1) top level of Guy Cables.
WIND LOADING: Engineering analysis indicates the tower will support 17
square feet of projected area at the wind speed of 85 mph with 3-second gust per
the EIA RS 222 Rev. G.
DEAD LOAD: The maximum dead load is 500 lbs.
WEIGHT: The tower & trailer GVWR 6,200 pounds.
SECTIONS: The tower is made from 5 each 20-foot sections #5, #6, #7, #8, #9.
DESCRIPTION:
The DX-86 Tower is designed to be mounted on a tilting frame. The frame is
mounted to a TRA-9 trailer. The tower is raised and lowered with a cable system.
The tower is extended with a lift cable driven onto a drum with a 3/4hp electric
motor and gearbox. The electrical system has an electric control box and limit
switches. The 3/4 hp motor and controls are wired 110 VAC.
The tower is equipped with top guy loops on the #5 section for the attachments
of (4) guy cables. The guy cables are guyed to the (4) trailer mounted outriggers,
each with a turnbuckle for adjustment.
The tower is mounted horizontal on a frame. It is tilted to the vertical position
by cable pulley arrangement driven onto a drum with a 3/4 hp electric motor and
gearbox.
TRAILER TYPE: Tandem axle trailer with hydraulic surge brakes
SPECIFICATIONS:
FRAME SIZE: 7’-4” wide x 20’-0”
DESCRIPTION:
The trailer is equipped with tandem 6000 lbs capacity axles and 4 Bias Ply 15”
tires. The front axle has hydraulic surge brakes. The trailer has a front jack and four
fold out outriggers with jacks to provide a stabilizing and leveling system. The guy
cables are guyed to the end of the outriggers. There is a front mounted storage box
to store the guy cables
and other accessories during transport.
53
CT-100 TOWER
TRAILER UNIT
TYPE: Tower, Guyed, Extendable, Motorized.
SPECIFICATIONS:
TOWER HEIGHT: Extended 101’ (100’ from the ground). Retracted 27 feet.
TOWER SUPPORT: Trailer mounted tower with (1) top level of guy cables.
WIND LOADING: Engineering analysis indicates the tower will support 17
square feet of projected area at the wind speed of 85 mph with 3- second gust per
the EIA RS 222 Rev. G.
DEAD LOAD: The maximum dead load is 500 lbs.
WEIGHT: The tower & trailer GVWR 6,200 pounds.
SECTIONS: The tower is made from 6 each 20-foot sections #4,#5, #6, #7, #8,
#9.
DESCRIPTION:
The DX-100 Tower is designed to be mounted on a tilting frame. The frame is
mounted to a TRA-9 trailer. The tower is raised and lowered with a cable system. The
tower is extended with a lift cable driven onto a drum with a 3/4hp electric motor and
gearbox. The electrical system has an electric control box and limit switches. The 3/4
hp motor and controls are wired 110 VAC.
The tower is equipped with top guy loops on the #5 section for the attachments of
(4) guy cables. The guy cables are guyed to the (4) trailer mounted outriggers, each
with a turnbuckle for adjustment. The tower is mounted horizontal on a frame. It is
tilted to the vertical position by cable pulley arrangement driven onto a drum with a
3/4 hp electric motor and gearbox.
TRAILER TYPE: Tandem axle trailer with hydraulic surge brakes
SPECIFICATIONS:
FRAME SIZE: 7’-4” wide x 20’-0”
DESCRIPTION:
The trailer is equipped with tandem 6000 lbs capacity axles and 4 Bias Ply 15”
tires. The front axle has hydraulic surge brakes. The trailer has a front jack and four
fold out outriggers with jacks to provide a stabilizing and
leveling system. The guy cables are guyed to
the end of the outriggers. There is a front
mounted storage box to store the guy
cables and other accessories during
transport.
54
CT114 TOWER
TRAILER UNIT
AB-1309 REPLACEMENT
55
TRAILER
TYPE: Drop deck trailer as manufactured by Great Dane.
SPECIFICATIONS:
TRAILER SIZE: 102" wide x 48’ long and 3’-9" high
WEIGHT: The tower & trailer GVWR without building 32,000 pounds.
DESCRIPTION:
The trailer is equipped with (2) Onan diesel generators, fuel tank, automatic transfer switch for the
generators, battery pack, (8) storage boxes for the storage.
SUSPENSION:
Model of Suspension - Hendrickson AANT 23K
Bogie Location -90'’ Fixed from Rear
Dump Valve - Hose Coupler Activated (Automatic) Dump Valve
AXLES:
Axle Type - Hendrickson Tapered Spindle Standard Wall
Brake Size - 16.50'’ x 7.00'’
Brake Actuators - Great Dane Standard 2.5'’ Stroke
Brake Lining - Furnished With Suspension
Brake Shoe Type - Hendrickson Extended Service
Brake Adjusters - Great Dane Standard Automatic 5.50'’
BRAKES/MUDFLAPS:
Anti-Lock Brakes - Wabco 2S/1M Easy Stop
Optional Diagnostic Cable - None
Brake Valves - Sealco
Air-Tank Drain Valve - Manual
Mudflaps - Great Dane, Smooth Black with Logo
Mudflap Mounting Location - On Rear Frame
TIRES/WHEELS/H and D:
Rim/Disc Wheel Size - 22.5'’ X 8.25'’
Hub/Wheel and Drum - Great Dane Hub Piloted Universal 10 Stud Hub with Outboard Cast Drums
Brake Drum Balancing - None-Standard
Wheel Type - 22.5'’ Steel Disc Wheel, Hub Piloted, 5HH
Wheel Stud Options - Long Studs for Future Alum Wheels
Tire Size - 11R 22.5
Tire Brand - Bridgestone R195F (G)
56
DX7114 TOWER
TYPE: Tower, Guyed, Extendable, Motorized.
SPECIFICATIONS:
TOWER HEIGHT: Extended 116 feet. Retracted 25 feet.
TOWER SUPPORT: Trailer mounted tower with (4) levels of Guy Cables.
The tower is designed to be a guyed tower.
WIND LOADING: Engineering analysis indicates the tower will support 40 square feet of projected area
at winds of 105 MPH with 3-second gust per the EIA RS 222 Rev. G.
DEAD LOAD: The maximum dead load is 700 lbs.
WEIGHT: The tower & trailer GVWR without building 32,000 pounds.
SECTIONS: The tower is made from 7 each 20-foot sections; #4, #5, #6, #7, #8, #9 and #10.
DESCRIPTION:
The DX7114 Tower is designed to be mounted on a frame. The frame is mounted to a step deck trailer.
The tower is raised and lowered with a cable system. The dual lift cable is driven onto a drum with a 3 hp
electric motor and gearbox. The 3 HP electric motor comes with an electric control box and a limit switch
wired for 230 Volt single phase 50 hertz power.
The tower is equipped with a top torque arm bolted to the #4 section with attachments for (6) guy
cables. The torque arm is capable of holding antennas and rotators. There are three loops on the #10, #8
and #6 sections for attaching three cables to each level. In total there will be three guy cables to the #10
section at 20’, three guy cables to the #8 section at 52 feet, three guy cables to the #6 section at 84 feet and
6 guy cables to the top of the
tower at 116 feet.
The tower is mounted horizontal on a frame. It is raised to the vertical position by (2) hydraulic
cylinders powered by a hydraulic power unit. The power unit has a 2 HP single phase, 50 hertz motor, a
reservoir, and 4 gal per minute pump.
FRAME
TYPE: Welded Space Frame for stabilizing and leveling tower to be attached to a drop deck trailer.
SPECIFICATIONS:
Frame SIZE: 7’-6" wide x 24’-6" long and 7’-10" high
Frame Weight with tower: 16,000 lbs
Frame Weight without Tower: 11,000 lbs without Tower
DESCRIPTION:
The frame is equipped with 4 each coax reel, 3 each guy cable reels and 4 each outriggers/ jacks, which
fold out from the frame to provide a stabilizing and leveling system. The outriggers level the trailer with a
hydraulic cylinder on each outrigger. The hydraulic cylinders are controlled individually by a hydraulic spool
valve with solenoid controls directed by toggle switches located in the main control box. The guy cables can be
short guyed to the end of the rear outriggers and front of the trailer.
57
CT-150 TOWER
TRAILER UNIT
58
TRAILER
TYPE: Drop deck trailer as manufactured by Great Dane.
SPECIFICATIONS:
Trailer Size: 102" wide x 48’ long and 3’-9" high
WEIGHT: The tower & trailer GVWR without building 32,000 pounds.
DESCRIPTION:
The trailer is equipped with (2) Onan diesel generators, fuel tank, automatic transfer switch for the
generators, battery pack, (8) storage boxes for the storage.
Suspensions
Model of Suspension - Hendrickson AANT 23K
Bogie Location -90” Fixed from Rear
Dump Valve - Hose Coupler Activated (Automatic) Dump Valve
Axles
Axle Type - Hendrickson Tapered Spindle Standard Wall
Brake Size - 16.50” x 7.00”
Brake Actuators - Great Dane Standard 2.5” Stroke
Brake Lining - Furnished With Suspension
Brake Shoe Type - Hendrickson Extended Service
Brake Adjusters - Great Dane Standard Automatic 5.50”
Brakes/Mudflaps
Anti-Lock Brakes - Wabco 2S/1M Easy Stop
Optional Diagnostic Cable - None
Brake Valves - Sealco
Air-Tank Drain Valve - Manual
Mudflaps - Great Dane, Smooth Black with Logo
Mudflap Mounting Location - On Rear Frame
Tires/Wheels/H and D
Rim/Disc Wheel Size - 22.5” X 8.25”
Hub/Wheel And Drum - Great Dane hub piloted universal 10 stud hub with outboard cast drums
Brake Drum Balancing - None-Standard
Wheel Type - 22.5” Steel Disc Wheel, Hub Piloted, 5HH
Wheel Stud Options - Long Studs for Future Alum Wheels
Tire Size - 11R 22.5
Tire Brand - Bridgestone R195F (G)
59
DX6150 TOWER
TYPE: Tower, Guyed, Extendable, Motorized.
SPECIFICATIONS:
TOWER HEIGHT: Extended 150 feet. Retracted 36 feet.
TOWER SUPPORT: Skid mounted tower with (4) levels of guy cables.
The tower is designed to be a guyed tower.
WIND LOADING: Engineering analysis indicates the tower will support 90 square feet of projected area
at winds of 85 MPH with 3-second gust per the EIA 222 Rev. G.
DEAD LOAD: The maximum dead load is 750 lbs.
WEIGHT: The tower & trailer GVWR 32,000 pounds.
SECTIONS: The tower is made from 6 each 30-foot sections: #5, #6, #7, #8, #9, and #10.
DESCRIPTION:
The DX6150 Tower is designed to be mounted on a frame. The frame is mounted to a step deck trailer.
The tower is raised and lowered with a cable system. The dual lift cable is driven onto a drum with a 3hp
electric motor and gearbox. The 3hp electric motor comes with an electric control box and a limit switch
wired for 230 Volt single phase 60 hertz power.
The tower is equipped with a top torque arm bolted to the #5 section with attachments for (6) guy cables.
The torque arm is capable of holding antennas and rotators. There are three loops on the #10, #8 and #6
sections for attaching three cables to each level. In total there will be three guy cables to the #10 section at
30’, three guy cables to the #8 section at 78 feet, three guy cables to the #6 section at 126 feet and 6 guy
cables to the top of the tower at 150 feet.
The tower is mounted horizontal on a frame. It is raised to the vertical position by (2) hydraulic
cylinders powered by a hydraulic power unit. The power unit has a 2 HP single phase, 60 hertz motor, a
reservoir, and 4 gal per minute pump.
FRAME
TYPE: Welded Space Frame for stabilizing and leveling tower to be attached to a drop deck trailer.
SPECIFICATIONS:
Frame Size: 7’-6" wide x 24’-6" long and 7’-10" high
Frame Weight with tower: 16,000 lbs
Frame Weight without Tower: 11,000 lbs without Tower
DESCRIPTION:
The frame is equipped with 4 each coax reel, 3 each guy cable reels and 4 each outriggers/ jacks, which
fold out from the frame to provide a stabilizing and leveling system. The outriggers level the trailer with a
hydraulic cylinder on each outrigger. The hydraulic cylinders are controlled individually by a hydraulic spool
valve with solenoid controls directed by toggle switches located in the main control box. The guy cables can
be short guyed to the end of the rear outriggers and front of the trailer.
60
Tower Trailer and Accessories Price List
Description
Part No.
Price
TOWER TRAILERS
CT-25 Manual 25' Tower Trailer Unit, Single Axle, MW-25
CT-33 Manual 33' Tower Trailer unit Single Axle, MW 33
CT-51 Manual 51' Tower Trailer unit Single Axle, W-51
CT-70A Electric 70' Tower Trailer unit Single Axle, LM-470
CT-85 Commercial Tower on Trailer, LM-585
CT-100 Commercial Tower on Trailer, DX-100
CT-114 114' Crank up tower, AB-1309 replacement, DX-114
CT-150 150’ Commercial Tower on Trailer, DX-6150
Grasshopper 86' crank up tower on Skid
Used AB 1309 Quick Erect 117' Crank Up Tower Trailer
500-0066
500-0068
500-0069
500-0072
500-0085
500-1000
500-1140
500-0150
495-1000
500-0101
$11,550.00
$11,950.00
$18,500.00
$24,083.00
$32,309.00
$39,500.00
Call
Call
Call
Call
TOWER TRAILER ACCESSORIES
Tool Box, 15 x 16 x 48 Galvanized
Tool Box, 1936 White Undermount Box
CT-85 Tool Kit
3.5 KW Generator
Three Arm Mount
Winch, 12 VDC 4,000 pound winch
Spare Tire
Manual Co Ax Reel
Electric Co Ax Reel for Trailer
CT-33 Guy Kit
CT-50 Guy Kit
CT-70 Guy Kit
CT-85 Guy Kit
CT-100 Guy Kit
CT-114 Guy Kit
CT-150 Guy Kit
500-0016
500-0018
500-0034
061-00016
700-045
500-0104
500-0042
500-00527
500-00529
500-0033
500-0051
500-0044
500-0035
500-0100
500-0114
500-0151
$395.00
$295.00
$475.00
$2950.00
$1,350.00
$1495.00
$475.00
$550.00
$1,750.00
$1,250.00
$1,350.00
$1,450.00
$1,550.00
$2,500.00
$3,250.00
$4,000.00
TASHJIAN TOWERS
MONOPOLES

The monopole is available as a standard
product in heights of 20’, 40’, 60’, 80’, 100’,
120’ and 140’ .

Maximum antenna loads which can be applied
at the top of each model are determined by
analysis.

Monopoles have an omnidirectional radiation
pattern in the horizontal plane.

Monopoles are often preferred for aesthetic
reasons.

Monopoles are frequently customized to meet
specific customer needs.

Efficient design, compact size and fast
installation.
62
63
Monopole Price List
Tashjian Towers monopoles show on the previous page are heavy duty, multiple carrier at 90 MPH,
high strength, tapered, slip fit, poles. Included in the pole price below are ports near antennas, two
large ports near base, anchor bolts, template, grounding kit, top cap, galvanizing, and delivered to most
locations in Ca. Engineering and foundation design are included. Sizes and prices are a general
guideline. Other pole geometry is available, for example a heavy duty pole is shown but a lighter duty
pole can be quoted.
Description
Weight
Price
40’ Pole
2,90
0
$10,
650
60’ Pole
5,40
0
$16,
200
80’ Pole
7,10
0
$21,
000
100’ Pole
12,5
00
$29,
200
120’ Pole
13,7
00
$32,
000
140’ Pole
22,9
00
$39,
000
64
Stealth Towers and Poles
With the increased interest in aesth
etics, Tashjian To wers can design,
manufacture, and construct a stealth towe rs and poles in the form o f trees,
windmills, water tanks, and towers disguised as comm on structures such as a
steeples, to help conceal its presence. Call today for more information.
65
Water Tank Tower
66
Windmill Tower
67
Construction
CONSTRUCTION SERVICES
Tashjian Towers is a licensed C51 Contractor in the State of California. We offer turnkey installation of the towers
we produce. We can provide sites surveys, foundation construction, tower erection, antenna and line installations,
buildings, building foundation, setting buildings, and fencing. By offering turnkey installations, we can reduce the risk
for the tower owner.
Also, we can send our construction crews to map towers for our engineering department. As our crew members are
knowledgeable about tower manufacturing, our tower mappings are comprehensive.
Tashjian Towers construction services can provide and set up mobile tower trailers for rental in most California
locations.
Rough Order of Magnitude Construction Costs (mobilization not included)
Foundations
Tower
WT-51
LM-470
T-20
T-26
T-36
T-48
TKD-301
TKD-302
TKD-303
TKD-304
TKD-305
TKD-306
Foundation
2.5 x 2.5 x 5.5
3.5 x 3.5 x 7.5
5x5x5
7x7x5
9x9x5
11 x11 x 5
8x8x4
10x10x 4
12x12x 4
14x14x4
16x16x4
18x18x4
Cubic Yards
1.3
3.4
4.6
9.1
15
22
9.5
14.8
21.3
29
40
48
Price
10,900
$1,500
2,200
3,200
5,900
8,500
6,000
8,500
10,900
Call
Call
Call
Erection
LM-470
T-20 40’
T-26 60’
T-48 80’
TKD/26-80’-303
TKD-120’-306X
TKD-180’-309
1,800
1,500
2,700
6,500
5,900
11,500
Call
68
Amateur Radio Towers
Tashjian Towers Corporation has the objective of engineering, designing, and manufacturing the best crank-up towers
in the world. This catalog covers the crank-up tower line of products.
The purpose of this catalog is to provide our customers with details of the products that Tashjian Towers can provide.
The catalog has general information, tower specifications, and a price list. The catalog lists projected areas for
budgetary purposes only. Wind speed requirements may be higher in your specific location. In the event there may be
a question of compliance in the design of a tower to state, local, building codes, special engineering calculations and
drawings can be prepared at a modest cost.
When a customer orders a tower, the ship date, shipping expenses, sales tax, will be determined. Written quotations
will be provided and a signed proposal will constitute an order to proceed. Payment is due upon shipment. Larger
towers will require a deposit.
69
Model No.
MW-33
TYPE: Self-supporting, extendable, manual crank-up tower.
SPECIFICATIONS:
TOWER HEIGHT: Extended 32’ – 6”. Retracted 11’ – 6”.
TOWER SUPPORT: Self-supporting, no guys.
W IND LOADING: Engineering analysis indicates the tower will support 25 Square feet of projected
area at winds of 85 MPH 3 second gust wind speed per ANSI/TIA EIA RS 222 Rev. G.
DEAD LOAD: The maximum dead load is 300 lbs.
WEIGHT: The tower with the base weighs 250 pounds.
SECTIONS: The tower is made from four each 10 foot sections, #4, #5, #6 and #7 is the base.
DESCRIPTION:
Tower includes a manual crank-up winch and hoisting cables, and a rigid concrete base mount. The
tower is designed to extend the tower telescopic sections uniformly. With your purchase, a user manual
and one stamped set of drawings and calculation is provided.
This tower has a pulley frame on one face only. The lifting cable is 3/16 x 7 x 19 aircraft cable.
Because of high strength tubing and the bracing of solid rod, this design is considered to be the strongest
engineering configuration for towers, yet saves weight, resists torsion load and reduces wind resistance,
allowing more useful load to be installed on the tower.
ACCESSORIES:
RCB-54 LT (#7 Wide Section)
Masts
CO-4 for MW-33
M
W-33 Manual, Drawings, Calculations
TA-54 Special
Replacem
ent Pulleys
#4 rotator plates
TB-2 Thrust Bearing
Cable Kit for MW-33
Manual
Winch 1,550 Pound
70
Model No. MW-33
PLAN VIEW
ELEVATION VIEW
(Required Concrete = 1.84 CY)
TOWER CROSS SECTION
MW-33 Elevation and Foundation
71
Model No.
WT-51
TYPE: Self-supporting, extendable, manual crank-up tower.
SPECIFICATIONS:
TOWER HEIGHT: Extended 51’. Retracted 21’-6”.
TOWER SUPPORT: Self-supporting, no guys.
WIND LOADING: Engineering analysis indicates the tower will support 13 square feet of projected area
at winds of 85 MPH 3 second gust wind speed per ANSI/TIA EIA RS 222 Rev. G.
DEAD LOAD: The maximum dead load is 300 lbs.
WEIGHT: The tower with the base weighs 355 pounds.
SECTIONS: The tower is made from three each 20 foot sections, #4, #5, and #6 is the base
DESCRIPTION:
Tower is complete with a manual crank-up winch and hoisting cables, and a rigid concrete base mount.
The tower is designed to extend the tower telescopic sections uniformly. With your purchase, a user’s
manual and stamped set drawings and calculations is provided.
This tower has pulley frame on one face only. The lifting cable is 3/16 x 7 x 19 aircraft cable.
Because of high strength tubing and the bracing of solid rod, this design is considered to be the strongest
engineering configuration for towers, yet saves weight, resists torsion load and reduces wind resistance,
allowing more useful load to be installed on the tower.
ACCESSORIES:
RCB-37LT
(#6 Wide Section)
TB-2
CO-3 for WT-51
TA-51
#4
Rotator Plates
Replacem
Cable
Kit for WT-51
Manual
Thrust Bearing
Masts
WT-51 Manual, Drawings, Calculations
ent Pulleys
Winch 1,550 Pounds
72
Model No. WT-51
PLAN VIEW
ELEVATION VIEW
(Required Concrete = 1.3 CY)
TOWER CROSS SECTION
WT-51 Elevation and Foundation
73
Model No.
LM-237
TYPE: Self-supporting, extendable, crank-up tower.
SPECIFICATIONS:
TOWER HEIGHT: Extended 37’. Retracted 20’ - 6”.
TOWER SUPPORT: Self-supporting, no guys.
WIND LOADING: Engineering analysis indicates the tower will support 20 square feet of projected area
at winds of 85 MPH 3 second gust wind speed per ANSI/TIA EIA RS 222 Rev. G.
DEAD LOAD: The maximum dead load is 300 lbs.
WEIGHT: The tower with the base weighs 325 pounds.
SECTIONS: There are two each 20 foot sections #5 and #6.
DESCRIPTION:
Tower is complete with a manual crank-up winch and hoisting cables, and a rigid concrete base mount.
The tower comes with a predrilled rotator mounting plate in top section. Note most rotators will fit inside
top section. The tower comes with an operation manual and on set of drawings and calculations for the
standard tower. The hoisting cable system designed to extend the tower telescopic sections uniformly.
This tower has pulley frame on two faces. The lifting cable is 3/16 x 7 x 19 aircraft cable.
Because of high strength tubing and the bracing of solid rod, this design is considered to be the strongest
engineering configuration for tower, yet saves weight, resists torsional loads and reduces wind
resistance, allowing more useful load to be installed on the tower.
ACCESSORIES:
RCB-37LT (#6 Wide Section)
CO-3 for LM-237
TA-37
#5 Rotator Plates
Cable
Kit for LM-237
Manual Winch
TB-2 Thrust Bearing
74
Model No. LM-237
PLAN VIEW
ELEVATION VIEW
(Required Concrete = 1.84 CY)
TOWER CROSS SECTION
LM-237 Elevation and Foundation
75
Model No.
LM-354E
TYPE: Self-supporting, extendable, crank-up tower.
SPECIFICATIONS:
TOWER HEIGHT: Extended 53’-9”. Retracted 21’-6”.
TOWER SUPPORT: Self-supporting, no guys.
W IND LOADING: Engineering analysis indicated the tower will support 18 square feet of projected
area at winds of 85 MPH 3 second gust wind speed per ANSI/TIA EIA RS 222 Rev. G.
DEAD LOAD: The maximum dead load is 500 lbs.
WEIGHT: The tower with the base weighs 660 pounds.
SECTIONS: The tower is made from three each 20 foot sections #5, #6 and #7.
DESCRIPTION:
Tower is complete with a manual crank-up winch and hoisting cables, and a rigid concrete base mount.
The tower comes equipped with a rotator plate, manual and one set of drawings and calculations.
Hoisting cable system designed to extend the tower telescopic section uniformly.
This tower has a pulley frame on two faces. The lifting cable is 1/4 x 7 x 19 Aircraft cable.
Because of high strength tubing and the bracing of solid rod, this design is considered to be the strongest
engineering configuration for towers, yet saves weight, resists torsion loads and reduces wind resistance,
allowing more useful load to be installed on the tower.
ACCESSORIES:
RCB-54LT (#7 Wide Section)
Cable
Kit for LM-354E
CO-3 for LM-354E
Manual
Winch
TA-54
TB-2 Thrust Bearing
#5 Rotator Plate
76
Model No. LM-354E
PLAN VIEW
ELEVATION VIEW
(Required Concrete = 2.2 CY)
TOWER CROSS SECTION
LM-354E Elevation and Foundation77
Model No.
LM-354HD and HDSP
TYPE: Self-supporting, extendable, crank-up tower.
SPECIFICATIONS:
TOWER HEIGHT: Extended 54’. Retracted 21’-6” .
TOWER SUPPORT: Self-supporting, no guys.
WIND LOADING: Engineering analysis indicates the tower will support 52 square feet of projected area
at winds
of 85 MPH 3 second gust wind speed per ANSI/TIA EIA RS 222 Rev. G.
DEAD LOAD: The maximum dead load is 500 lbs.
WEIGHT: The tower with the base weighs 960 pounds.
SECTIONS: The tower is made from three each 20 foot sections #6, #7 and #8.
DESCRIPTION:
Tower is complete with a gearbox, drum and hoisting cables, and a rigid concrete base mount. The tower
comes equipped with a manual and one set of drawings and calculations, hoisting cable system
designed to extend the tower telescopic sections uniformly.
The LM-354HD uses a manual crank on the gearbox to extend and retract the tower. This tower does not
have a positive pull down.
The LM-354HD SP is a motorized version of the above tower, the 1/2 HP electric motor comes with an
electric control box and two limit switches. This tower has a positive pull down and has the largest top
section offered.
“Positive Control” worm gear winch permits the raising and lowering of LM towers without the aid of
stops or locks. LM-354HD uses a 40:1 ratio winch. The LM-354HDSP also includes a pre-wired motor
control assembly.
This tower has a pulley frame on two faces. The lifting cable is 1/4 x 7 x 19 Aircraft cable.
ACCESSORIES:
RCB-70LT (#8 Wide Section)
CO-3 for LM-354HD
TA-70
#6 Rotator Plates
Cable
Kit for LM-354HD
Manual Winch
TB-2 Thrust Bearing
78
Model No. LM-354HD and HDSP
PLAN VIEW
ELEVATION VIEW
(Required Concrete = 3.4 CY)
TOWER CROSS SECTION
LM-354HD and HDSP Elevation and
Foundation
79
Model No.
LM-470
TYPE: Self-supporting, extendable, crank-up tower.
SPECIFICATIONS:
TOWER HEIGHT: Extended 69’-6”’. Retracted 25’-6”.
TOWER SUPPORT: Self-supporting, no guys.
WIND LOADING: Engineering analysis indicates the tower will support 18 square feet of projected area
at winds of 85 MPH 3 second gust wind speed per ANSI/TIA EIA RS 222 Rev. G.
DEAD LOAD: The maximum dead load is 500 lbs.
WEIGHT: The tower with the base weighs 1,200 pounds.
SECTIONS: The tower is made from 4 each 20 foot sections #5, #6, #7 and #8.
DESCRIPTION:
Tower is complete with a gearbox, drum, hoisting cables, and a rigid concrete base mount. The tower
comes equipped with a rotator plate, manual and one set of drawings and calculations. Hoisting cable
system designed to extend the tower telescopic sections uniformly.
The LM-470 is motorized, and includes 1/2 HP electric motor, electric control box and two limit
switches
wired for 110. This tower has a positive pull down.
“Positive Control” worm gear winch permits the raising and lowering of LM towers without the aid of
stops
or locks. LM-470 uses a 40:1 ratio winch. The LM-470 also includes a pre-wired motor control
assembly.
This tower has a pulley frame on two faces and uses 1/4 x 7 x 19 aircraft cable.
ACCESSORIES
RCB-70LT (#8 Wide Section)
CO-4 for LM-470
Replacem
TA-70
#5 Rotor Plates
Cable Kit for LM-470
RLT
LM-470 Manual, Drawings, Calculations
ent Pulleys
Masts
TB-2 Thrust Bearing
80
Model No. LM-470
PLAN VIEW
ELEVATION VIEW
(Required Concrete = 3.4 CY)
LM-470 Elevation and Foundation
TOWER CROSS SECTION
81
Model No.
DX-86
TYPE: Self-supporting, extendable, crank-up tower.
SPECIFICATIONS:
TOWER HEIGHT: Extended 86’. Retracted 22’.
TOWER SUPPORT: Self-supporting no guys.
WIND LOADING: Engineering analysis indicates the tower will support 20 square feet of projected area
at winds
of 85 MPH 3 second gust wind speed per ANSI/TIA EIA RS 222 Rev. G.
DEAD LOAD: The maximum dead load is 550 lbs.
WEIGHT: The tower with the base weighs 2100 pounds.
SECTIONS: The tower is mad from 5 each 20 foot sections #5, #6, #7, #8 and #9.
DESCRIPTION:
Tower is complete with a gearbox, drum, hoisting cables, and a rigid concrete base mount. The tower
comes equipped with a rotator plate, manual and one set of drawings and calculations. Hoisting cable
system designed to extend the tower telescopic sections uniformly.
The DX-86 is a motorized version of the above tower. The 1 HP electric motor comes with an electric
control box and two limit switches wired for 220 V. This tower has a positive pull down. “Positive
Control” worm gear winch permits the raising and lowering of DX towers without the aid of stops or
locks. DX-86 uses a 50:1 ratio winch. The DX-86 also includes a pre-wired motor control assembly.
This tower has a pulley frame on 3 faces and uses 5/16 x 7 x 19 aircraft cable.
ACCESSORIES:
RCB-86 LT (#9 Wide Section)
TB-2
Thrust Bearing
CO-6 for DX-86
Masts
TA-86
Replacem
ent Pulleys
#5 Rotator Plates
DX-86
manual, Drawings, Calculations
Cable Kit for DX-86
RLT
82
Model No. DX-86
PLAN VIEW
ELEVATION VIEW
(Required Concrete = 5.3 CY)
TOWER CROSS SECTION
DX-86 Elevation and Foundation
83
TM Series
Specifications
Model No.
Sections
TM-358
3
TM-370
3
TM-370HD
3
TM-490
4
TM-5100RC
5
Sizes
Top: 2-3/8”
Bottom: 6-5/8”
Top: 4-1/2”
Bottom: 8-5/8”
Top: 6-5/8”
Bottom: 10-3/4”
Top: 4-1/2”
Bottom: 10-3/4”
Top: 2-7/8”
Bottom: 10-3/4”
Max.
Height
Min.
Height
Winch System
Power
Required
Vertical Dead
Load Max
70 mph Wind
Allowable Sail Area
58’
23’
40:1, 1/2 HP
110 VAC
500 lbs
15 Sq. Ft.
70’
28’
40:1, 1 HP
220 VAC
500 lbs
15 Sq. Ft.
70’
28’
50:1, 1 HP
220 VAC
600 lbs
35 Sq. Ft.
90’
30’
50:1, 1 1/2 HP
220 VAC
650 lbs
20 Sq. Ft.
100’
32’
50:1, 1 1/2 HP
220 VAC
700 lbs
20 Sq. Ft.
TM SERIES TOWER INFORMATION
The aerodynamic design of the slender, tubular TM Tower makes it more aesthetically capable of supporting
large antenna loads. Tubular sections used in the TM towers provide a low wind resistance design. The
telescopic cabling extends each section uniformly. Aircraft grade galvanized cable of 7 x 19 construction is
used on all models. The TM Tower is free standing, without aid of bracket or guys.
All TM towers include a hinged base mount that is installed in concrete. This base mount allows the tower to
be hinged at ground level and tilted into a vertical position.
The TM towers are hot-dipped galvanized finish after fabrication for maintenance free finish.
The top section of each tower model is adapted to accept an accessory rotator cage assembly. If a rotator
assembly is not desired, the mast adapter can be ordered as an accessory item. All standard mast adapters
accommodate a two (2) inch O.D. mast size.
ACCESSORIES:
CO-3 for TM
Tilting Gin Pole
Cable Kit
TB-2 Thrust Bearing
Work Platform
Rotator Cage Assembly
Motor Control Assembly
Remote Control Kit
84
TM Series
Model No.
Length
Width
Depth
Required
Concrete Volume
(Cubic Yards)
TM-358
TM-370
TM-370HD
TM-490
TM-5100
36”
42”
48”
48”
48”
36”
42”
48”
48”
48”
6’-0”
8’-3”
9’-3”
9’-3”
10’-3”
2.0
3.7
5.5
5.5
6.1
TM Series Concrete Base
85
TM Tower Elevation
(TM-370 Shown)
A
Acceessorries
Coax Standofff Kits
Tilt--Over Acccessory
CO-2 fo
or 2 section towers
t
CO-3 fo
or 3 section towers
t
CO-4 fo
or 4 section towers
t
CO-5 fo
or 5 section towers
t
Ro
otator Platte
Rigid Concretee Base
86
T
Tilt-O
Overr Accesssory
Erection
n of Tower with
Tilt-Ov
ver Accesssory
Position
P
#1
Position #3
Position
n #1: Installaation
With thee Tilt-Over Acccessory installeed on the Rigidd
Concretee Base, attach tower
t
in horizoontal position
Position
n #2: Operattion
Tilt toweer to vertical to
o operate towerr
Position
n #3: Antenn
na Adjustmeent
Tilt Tow
wer over to instaall or adjust anntenna
Note: To
ower must be nested
n
to use Tiilt-Over Accesssory
T
Tilt Accessory installed
i
on
Rigid Concreete Base
87
P
Position #22
Tower Price List
Description
Part No.
Weight (lb)
Price
MW-33 33ft Manual Crank-Up Tower
WT-51 51ft Manual Crank-Up Tower
WT-67 67ft Manual Crank-Up Tower
433-00401
451-00501
467-00401
340
360
385
$2,805.00
$2,700.00
$4,125.00
LM Series
LM-237 37ft Manual Crank up
LM-354E 54ft Manual Crank up
LM-354 HD 54ft Manual Crank up with gear box
LM-354HDSP 54ft Motorized Crank up with tower
LM-470 70ft Motorized Crank up with tower
LM-584 84ft Motorized Crank up with tower
DX-70 70ft Motorized Crank up tower
DX-70HD 70ft Motorized Crank up tower
DX-86 86ft Motorized Crank up tower
DX-86HD 86ft Motorized Crank up tower
DX-100 100ft Motorized Crank up tower
437-00401
454-00406
454-00402
454-00409
470-00401
454-0584
481-0026
482-0401
490-59000
486-000401
481-0100
330
525
875
950
1,100
1,500
2,050
3,500
2,300
4,000
2,750
$2,035.00
$3,245.00
$5,225.00
$6,895.00
$8,245.00
$12,045.00
$13,145.00
$15,070.00
$13,695.00
$16,060.00
$17,600.00
TM Series
TM-358
TM-370
TM-370HD
TM-490
TM-5100
TM-5100R
525-0358
525-0370
525-0371
525-0490
525-5100
525-00309X
1,750
2,100
3,050
3,275
3,350
3,450
$7,920.00
$10,890.00
$11,550.00
$16,500.00
$20,900.00
$24,750.00
Heavy Antenna Mast (2.0” OD x .188” Wall)
AD-100H (10' long)
AD-150H (15' long)
AD-200H (20' long)
300-00049
300-00050
300-00051
37
55
73
$185.00
$295.00
$405.00
Extra Heavy Antenna Mast (2.0” OD x .250”)
AD-100EH (10' long)
AD-150EH (15' long)
AD-200EH (20' long)
300-00053
300-00054
300-00055
47
71
94
$255.00
$400.00
$470.00
Mast and Rotator Mounting Plates
CDR Rotator Plate (WT-51)
CDR Rotator Plate (LM-237, LM 354, LM 470)
CDR Rotator Plate (LM354HD)
T2R Rotator Plate (LM-237, LM354, LM470)
T2R Rotator Plate (LM354HD)
TM Rotator cage assembly
480-0000 4
115-00308
454-00104
460-00128
454-00117
525-9490
7
8
9
8
9
40
$85.00
$90.00
$120.00
$100.00
$80.00
$665.00
Coax Standoff Kits
CO-2 Standoff (LM-237)
CO-3 Standoff (WT-51, LM-354E, LM-354HD)
CO-4 Standoff (LM-470)
CO-5 Standoff (DX-86)
441-00406
441-00404
441-00408
441-00411
8
12
16
20
$68.00
$112.00
$136.00
$170.00
Tilt Over Accessories
TA-37 (LM-237)
TA-51L (WT-51)
TA-54L (LM354E)
TA-70L (LM354HD & LM470E)
TA-86L (DX-86)
GP300TM Sky Needle Ginpole
412-00401
412-00402
415-00401
417-00401
481-00301
500-0043
120
120
137
149
179
375
$695.00
$695.00
$760.00
$760.00
$2,350.00
$2,800.00
Tower Price List
Description
Part No.
Weight (lb)
Manual Winches
K1550 Fulton Winch
K2550 Fulton Winch
041-0335
041-0345
20
30
$160.00
$305.00
Thrust Bearing (W & LM Series)
TB-2 Bearing
400-00089
10
$185.00
Replacement Concrete Bases
RCB-37/51LT (WT51 and LM237)
RCB-54LT (LM354E)
RCB-70LT (LM354HD and LM470E)
RCB-86LT (DX86)
CB-490 (TM490, TM5100R, TM370HD)
CB-370 (TM370)
RCB-36 (W36)
400-00400
400-00401
460-00170X
481-00300
390-00309X
370-00308X
400-0136
80
86
129
180
325
325
82
$345.00
$360.00
$395.00
$740.00
$1,105.00
$695.00
$315.00
Remote Control Kit-Less Motor - Towers must have “Pull down” Capability
RLT (purchased with the tower)
370-00328
RLT (purchased separately)
370-00327
30
30
$1,340.00
$1,515.00
Replacement Cable Kits (with cable diagrams)
Cable Kit, MW-33
Cable Kit, MW-33 - S.S Version 1/4"
Cable Kit, WT-51
Cable Kit, WT-51 - S.S Version 1/4"
Cable Kit, LM 237
Cable Kit, LM237 - S.S Version 1/4"
Cable Kit, LM354E
Cable Kit, LM354HD
Cable Kit, LM354HD - S.S Version 1/4"
Cable Kit for LM-470
Cable Kit for LM-470 1/4 inch S.S
Cable Kit, DX86
Cable Kit, DX100
Cable Kit, TM370C
Cable Kit, TM370C - S.S Version
25
25
16
16
13
13
20
41
41
80
80
106
135
141
141
$135.00
$205.00
$100.00
$185.00
$100.00
$175.00
$145.00
$295.00
$520.00
$520.00
$770.00
$660.00
$855.00
$800.00
$1015.00
Motor Control Kits (Towers having 40:1 winch ratio) Includes Motor & Control Box
MC-50 (1/2HP)
060-50002
MC-75 (3/4 HP)
060-2935
MC-100 (1 HP)
060-2936
60
60
60
$715.00
$800.00
$935.00
Replacement Motors Only
1/2 HP Motor (washdown)
3/4 HP Motor (washdown)
1 HP Motor (washdown)
20
25
30
$460.00
$565.00
$715.00
051-0021
051-0022
051-0025
051-0135
051-0105
051-0110
051-0115
051-0120
051-0121
051-0085
051-0090
051-0100
051-0095
051-0125
051-0126
060-0330
060-0331
060-0335
Price
Manual Control Motor Kits with Top and Bottom Limit Switch (Towers having 40:1 ratio)
Includes Motor, Control box, & 2 Limit Switches
MC-50 LL (1/2 HP)
060-50000
65
MC-75LL (3/4 HP)
060-75000
68
MC-100LL (1 HP)
060-10000
71
$1,170.00
$1,310.00
$1,470.00
Pulleys
Pulley Assembly, 4A/K8 Bearing
Pulley Assembly, 5A/K8 Bearing
$75.00
$80.00
045-0125
045-0150
1
1
TERMS AND CONDTITIONS OF SALE
1. All quotations are for immediate acceptance and subject to change without notice.
2. This quotation is based upon the assumption that the materials required for the items quoted can be obtained from
the Steel Mills and/or Seller’s other suppliers within days after approval by Seller, In the event Seller’s suppliers are
unable to make deliveries within the period specified, then such delay shall be considered to be a delay in the
completion of the work due to causes beyond the control and without the fault or negligence of Seller. Furthermore,
the following “force majeure” definition applies: The term “force majeure” as used in this proposal shall mean and
include any cause, act or event beyond the control and without the fault or negligence of Seller, including but not
restricted to: acts of God; weather; floods; storms; explosion; fires; labor trouble; strikes; insurrection; riots;
freight embargoes; acts of the public enemy; items quoted from Seller’s customary suppliers; scarcity of or inability
to obtain or use labor or equipment; Federal, State or Local law or orders, rules or regulations of governmental
authority, or default of Seller’s subcontractors due to any cause. If by reason of “force majeure” seller is prevented,
hindered or delayed in satisfying or meeting any condition of this Quotation or is prevented, hindered or delayed in its
performance under this Quotation. Seller shall be excused from such performance to the extent that it is prevented,
hindered or delayed thereby, and during the continuous of any such happening or event then this quotation shall be
deemed suspended so long as and to the extent that any such cause prevents, hinders or delays the performance, and
the time while Seller is so prevented shall not be counted against Seller, anything in this Quotation to the contrary
notwithstanding; and Seller shall not by liable for any claims or damages in any form or of an kind of nature for excess
costs, if nay , for any failure to perform arising out of or any reason of “force majeure”.
Seller shall give written notice to Buyer within a reasonable time after the happening thereof of the nature, and, so
far as possible, the extent of any “force majeure” condition referred to in the preceding paragraph hereof, in order that
said party may be fully advised as to the nature and extent of said condition. In the event that it appears to Seller that
Seller’s performance shall be delayed, Seller shall so state in said written notice in which even the following shall
apply;
(1) The buyer may, by written notice transmitted to Seller within thirty (30) days after receipt of the above Notice,
cancel the undelivered or undeliverable portion of the items quoted without liability except for costs and expenses and
a reasonable profit allocable to work done.
(2) If the Buyer does not cancel the order in the manner and within the time specified in Paragraph (1) , seller may,
by giving to Buyer written notice:
(a) Suspend performance on the undeliverable items quoted pending removal of the causes of delay, under
which circumstances the Buyer agrees to immediately pay an equitable proportion of the price of the items if such
items are not separately priced;
(b) Cancel the undeliverable portion of the items quoted at any time as long as the causes of delay continue.
(3) If performance is suspended in accordance with (2) (a), the price of the suspended portion of the items quoted
shall be subject to revision as follows:
(a) Prior to proceeding with the performance of the items quoted Seller shall notify the Buyer of any price
revision applicable and obtain written agreement thereto.
(b) In the event of failure to agree upon such revised price or prices within the time to be specified in the notice
described in Paragraph (3) (a), and Seller does not desire to proceed with performance on the basis of the price of the
original items, Seller or Buyer may cancel upon delivery of written notice to the other party, without liability except
that of the Buyer for costs and expenses and a reasonable profit, allocable to work done prior to the suspension of
performance.
(4) Seller shall not be liable for damages in any manner resulting from cancellation or suspension of performance in
accordance with the terms of this condition.
3. If construction by others and charges to a designated point are included in the prices herein quoted, we shall not be
responsible for switching, spotting, handling storage, demurrage or any charges incurred therefore.
4. Where installation is not included, our responsibility ceases upon delivery of shipments to carrier when sales are
f.o.b. point of shipment. Buyers are warned against receiving them until careful inspection has been made.
5. No Federal, State, or local taxes are included in price unless specifically stated in the proposal. All quotations and
sales are subject to increase without notice for all present and future Federal, State, and local taxes, including sales,
use and excise tax that may be assessed, charged or levied by any governmental action, which taxes are to be added to
the quoted price and paid by the Buyer.
90
6. Manufacturer’s guarantee: For a period of one (1) year after shipment, we warrant the article to be reasonably fit for
the purpose for which it is Manufactured and sold, and shall be free from defects in material and workmanship. No
other warranty to material or workmanship is expressed or implied, and no other claim for damage or charge for labor
will be allowed. We reserve the sole right to determine whether or not any part to be replaced is to be furnished free of
charge or to be supplied at our regular sales price.
7. Commodities not manufactured by us are warranty and guaranteed only to extent and in the manner warranted and
guaranteed to us by the manufacturer and then only to the extent we are able to enforce such warranty or guaranteed.
8. Orders cannot be canceled by Buyer under any circumstances without the Buyer first, reaching an agreement in
writing with the Seller covering all damages. In ever event, written permission must be secured prior to returning
goods for credit.
9. We reserve the right to change or modify our design and construction and to substitute material equal to or superior
to that originally specified.
10. Every effort will e made to maintain shipping schedules shown. However, we shall not be liable for delays or
default in filling this order caused by strikes or other disputes, floods, fires, accidents, contingencies or transportation
and other causes of like or different character beyond the control of the Seller.
11. No terms or conditions, other than those stated herein and no agreement or understanding, oral or written in any
way purporting to modify these terms or conditions whether contained in Buyer’s purchase or shipping release forms
or elsewhere shall be binding on Seller, unless hereafter made in writing and signed by Seller’s authorized
representative. All proposals, negotiations and representations, if any made prior and with reference hereto are merged
herein.
12. Any controversy or claim arising out of or relating to this agreement or the breach thereof shall be settled by
arbitration in accordance with the rules of the American Arbitration Association. All hearings shall be oral and shall
be held in Tulare County, California. Judgment upon the award rendered by the arbitrate may be entered in any court
having jurisdiction thereof and shall be final both as law and fact.
13. If Buyer requires Seller to delay delivery of material, payment for material or services shall not thereby be
postponed or extended. Material held in storage for Buyer shall be at the risk and expense of the Buyer and at a price
agreed upon by Buyer and Seller at the time of request for storage by buyer, If Buyer removes has order from Seller’s
production schedule, then the Buyer automatically relinquishes hiss position in Seller’s production schedule. At time
buyer instructs Seller to proceed with order, it must at that time take its position in Seller’s production schedule
existing at time order is reentered.
14. This quotation includes unloading tower material from carrier and hauling to maximum of 20 miles to the
construction site. Cost of unloading anchor assemblies to be the expense of the Buyer.
15. Where roof top installations are required, tower material and services are furnished to base of tower only, and all
roof modifications, waterproofing steel reinforcements to the roof are not included in this quotation unless specifically
noted.
16. Shipments and deliveries shall be subject to approval of Seller’s Credit Department. If Buyer fails to fulfill the
terms payment, Seller may defer further shipments, or may at its option, cancel the unshipped balance. Seller reserves
the right, previous to making any shipments, to require from Buyer satisfactory security for performance of Buyer’s
obligations. No failure of Seller to exercise any right acceding from any default of Buyer shall impair Seller’s rights in
case of any subsequent default of Buyer.
17. When export license is required, the acceptance of this quotation is subject to export license being granted and
supplied by the Buyer unless otherwise specified.
18. The price and delivery of the tower, and the cost and time of the tower, antenna and transmission lines are based
upon furnishing and erecting the exact size and type material shown, and at the location indicated. Modification, if
any, of these details must be agreed to by both parties in writing, and it is understood that any such modification will
require a revision of both price and delivery.
19. Acceptance of all orders must be approved by the home office of this Company.
20. The above provision set for the sole and only obligation or liability of and warranty made by Tashjian Towers
Corporation in connection with the items covered by this agreement, and any provisions in any proposals,
specifications or in any other provisions hereof, are merely descriptive and are not to be construed as either obligations
or warranties made by Tashjian Towers Corporation.
91
CONDITIONS OF SALE – ERECTION OF TOWER
1. This quotation is based on work being carried out in one continuous operation without interruption or delays due to
missing materials such as coax lines, transmission line hangers, antenna, reflectors, or electrical power. All material
necessary for completing installation to be furnished by Buyer must be o the tower site prior to starting of erection or
scheduled in such a manner as to avoid delaying erection crew.
2. Antenna, transmission lines and transmission line clamps must be available when construction work on tower is
under way. Drawing showing transmission line installation is to e furnished by customer.
3. Tower site shall be accessible to workmen and erection equipment, using two wheel drive vehicles.
4. This quotation on labor to erect tower and antenna is based upon weather suitable for outdoor construction between
the dates of April 15 and November 15. In the event the customer desires the work done under the handicap of snow,
ice or severe cold, or between the dates of November 15 and April 15, the cost of erection shall be increased to include
the additional cost incurred because of adverse weather conditions, unless otherwise specified in the proposal.
5. Should any conditions exist such that the use of union trades for installation of the tower, accessories and/or
foundations are necessary, the prices quoted are subject to adjustment, unless the union stipulation has been specifically
noted in the inquiry.
6. Unless provided by Tashjian Towers Corporation, the foundations must be completed so as to permit continuous
work from time Seller’s crew reports on the job, and must be finished in accordance with Seller’s specifications.
7. Installation of all wiring and all transmission lines shall be on the tower to the base of the tower only unless
otherwise specified.
8. Seller to carry or cause to be carried Workmen’s Compensation, Public Liability and Property Damage Insurance and
all Risk Insurance, which is included as part of this quotation and shall be terminated in accordance with the following
paragraph.
“Upon notice of the date of completion, the customer shall have seven (7) days from such date of completion to
accept or reject the structure, If no notice or rejection is received within such timer, the structure shall be considered the
customer’s property and our Property Damage Insurance and All risk Insurance on such structure shall be canceled, or
should the Buyer commence broadcast operations from the tower before it is accepted the, all Seller’s insurance will
terminate after the first day of such broadcast operations.”
9. All fees, service charges, cost of and expense to obtain permits and/or contractor’s licenses to be for the account of
the Buyer.
10. This quotation can be changed or varied only by the duty authorized officers of the parties hereto in writing.
11. Whenever regulations require or conditions necessitate working more than an eight (8) hours day and or five (5) day
week, all overtime will be charged for in addition to quoted prices.
12. It is also Buyer’s responsibility to:
(a) Provide (1) tagline (25 t. wide and equal in length to the height of the tower), cleared of all obstruction in order to
permit a truck to be driven thereon.
(b) Clear a fire land down each guy radial 25 ft. wide on each side of the guy line, and extend this lane 50 ft. beyond the
outer guy anchor; a 10 ft. width of this 150 ft. lane must be cleared of all obstructions in order to permit a truck to be
driven thereon.
(c) So grade the area immediately surrounding the tower so as to permit the moving of trucks, crane and/or other
equipment required to handle and erect the tower.
(d) Clear an area 250 ft x 250 ft. adjacent to the center of the tower to permit unloading, sorting, assembling and
working space.
(e) Provide the necessary wooden horses to support the antenna during construction.
(f) Provide necessary fittings and gas required in pressure checking all of the transmission lines.
(g) Provide electrical power to the base of the tower.
(h) Provide the necessary building and construction permit.
(i) Provide the necessary police service to direct traffic if in the event the guy lines should cross a public or private road.
(j) Provide toilet facilities if required by regulations.
13. Seller shall not be responsible for delays arising from92
causes beyond its reasonable control.
CONDITIONS OF SALE – FOUNDATION
1. When the foundations are specified as part of this quotation, it is assumed that this work will be done under normal
ground conditions with a soil bearing capacity of at least 4,000 lb. Per sq. ft. in accordance with E.I.A.
specifications, It shall be their responsibility of the Buyer to supply soil bearing capacity and Seller shall have an
absolute right to rely on written test reports furnished by Buyer in the preparation of foundation drawings and in the
installation of foundations. Blasting, cribbing, fill, removal of obstruction planking, snow, road building, and
clearance for easy access to the site. Existence of swamp, sand, mud, water and frozen ground are not considered
normal. If any of the above conditions are encountered, the foundations price shall be increased to include the
additional cost incurred, plus a reasonable profit allocable to the work performed.
2. The foundation price does not include clearing a grading of tower site, profiles, or grounding system.
93