SCTL is one of the leading enamelled copper wire producer in INDIA. Our company is using the state of art machinery for enamelled copper wire production technology We can produce enamelled copper wire according to national and international standards such as IEC, & NEMA. The aim of our company is to produce high quality enamelled copper wire. Quality control team strictly applies quality control test at every step of production. SCTL is always at the disposal of its client to provide assistance and share its vast experience with them. Technical Data of Enamelled Copper Wire based on IEC 60317 Nominal Diameter mm Bare Wire Tolerance mm Outer Diameter Resistance per meter at 20° C Grade 1 Grade 2 Grade 3 Nominal Minimum Maximum Min. Max. Min. Max. Min. Max. Ω/m Ω/m Ω/m mm mm mm mm mm mm Nominal Diameter mm 0.200 ± 0.003 0.5441 0.5237 0.5657 0.214 0.226 0.227 0.239 0.24 0.252 0.200 0.212 ± 0.003 0.4843 0.4669 0.5026 0.227 0.240 0.241 0.254 0.255 0.268 0.212 0.224 ± 0.003 0.4338 0.4188 0.4495 0.239 0.252 0.253 0.266 0.267 0.28 0.224 0.236 ± 0.004 0.3908 0.3747 0.4079 0.253 0.267 0.268 0.283 0.284 0.298 0.236 0.250 ± 0.004 0.3482 0.3345 0.3628 0.267 0.281 0.282 0.297 0.298 0.312 0.250 0.265 ± 0.004 0.3099 0.2982 0.3223 0.283 0.297 0.298 0.314 0.315 0.33 0.265 0.280 ± 0.004 0.2776 0.2676 0.2882 0.298 0.312 0.313 0.329 0.33 0.345 0.280 0.300 ± 0.004 0.2418 0.2335 0.2506 0.319 0.334 0.335 0.352 0.353 0.369 0.300 0.315 ± 0.004 0.219 0.2121 0.227 0.334 0.349 0.35 0.367 0.368 0.384 0.315 0.335 ± 0.004 0.1939 0.1878 0.2004 0.355 0.372 0.373 0.391 0.392 0.408 0.335 0.355 ± 0.004 0.1727 0.1674 0.1782 0.375 0.392 0.393 0.411 0.412 0.428 0.355 0.375 ± 0.005 0.1548 0.1494 0.1604 0.396 0.414 0.415 0.434 0.435 0.453 0.375 0.400 ± 0.005 0.136 0.1316 0.1407 0.421 0.439 0.44 0.459 0.46 0.478 0.400 0.425 ± 0.005 0.1205 0.1167 0.1244 0.447 0.466 0.467 0.488 0.489 0.508 0.425 0.450 ± 0.005 0.1057 0.1042 0.1109 0.472 0.491 0.492 0.513 0.514 0.533 0.450 0.475 ± 0.005 0.09646 0.09366 0.09938 0.499 0.519 0.52 0.541 0.542 0.562 0.475 0.500 ± 0.005 0.08706 0.08462 0.08959 0.524 0.544 0.545 0.566 0.567 0.587 0.500 0.508 ± 0.006 0.08434 0.08168 0.08711 0.533 0.554 0.556 0.578 0.58 0.601 0.508 0.559 ± 0.006 0.06965 0.0676 0.07178 0.584 0.605 0.607 0.629 0.631 0.652 0.559 0.610 ± 0.006 0.05848 0.05687 0.06017 0.637 0.659 0.661 0.684 0.686 0.708 0.610 0.711 ± 0.008 0.04305 0.04175 0.04442 0.744 0.766 0.772 0.795 0.8 0.822 0.711 0.813 ± 0.009 0.03293 0.03194 0.03396 0.849 0.872 0.878 0.902 0.908 0.931 0.813 0.914 ± 0.009 0.02605 0.02528 0.02686 0.953 0.976 0.984 1.008 1.015 1.038 0.914 0.965 ± 0.010 0.02337 0.0227 0.02407 1.004 1.028 1.035 1.06 1.067 1.091 0.965 1.016 ± 0.010 0.02108 0.0205 0.02169 1.056 1.08 1.088 1.113 1.12 1.144 1.016 1.118 ± 0.011 0.01741 NA NA 1.157 1.182 1.189 1.215 1.222 1.247 1.118 1.219 ± 0.012 0.01465 NA NA 1.26 1.285 1.292 1.318 1.325 1.35 1.219 1.321 ± 0.013 0.01247 NA NA 1.362 1.388 1.396 1.423 1.43 1.456 1.321 1.422 ± 0.014 0.01076 NA NA 1.466 1.492 1.501 1.528 1.5 1.526 1.422 Intermediate diameter belong to R40 series are not included in the table, these are produced on request. Corporate Office Shilpi Cables Technologies Ltd A-19/B-1 Extension Mohan Co-op. Industrial Estate Mathura Road, P.O. Badarpur New Delhi - 110044, India Tel.: +91 11 43117900 Fax.: +91 11 43117902 Factory Chopanki Factory SP-1037, Chopanki, RIICO Industrial Area, Bhiwadi, Dist. Alwar Rajasthan - 301019 Bhiwadi Factory E-138, RIICO, Industrial Area Phase -1, Bhiwadi, District - Alwar Rajasthan - 301019 www.shilpicables.com You can email us at - info@shilpicabletech.com Enamelled Copper Wire Enamelled Copper Wire Our Product Range of Round Enamelled copper Wires 1 Type of enamelled wire Specification 12 13 14 15 16 17 18 19 20 Self solderable Self solderable 2 Self solderable 3 Self solderable 4 Self solderable/ & bondable 5 Self solderable/Self bonding 6 Self solderable/Self bonding 7 Self solderable/High temperature 8 High mechanical/ strength 9 High mechanical/ strength 10 High Thermal & mechanical/strength 11 General Purpose General Purpose General Purpose General Purpose High Temperature High Temperature High Temperature High Temperature Self Bonding 21 IS : 13730-19/ IS : 13730-21/ IS : 13730-20/ IS : 13730-23/ IS : 13730-2/ IS : 13730-35/ IS : 13730-36/ IS : 13730-51/ IS : 13730-1/ IS : 13730-4/ IS : 13730-7/ IEC-60317-19/ IEC-60317-21 IEC-60317-20/ IEC-60317-23 IEC-60317-2 IEC-60317-35 IEC-60317-36 IEC-60317-51/ IEC-60317-1/ IEC-60317-4/ IEC-60317-7 IS : 13730-54/ IEC-60317-54 NEMA JIS C 3202- SBUEW JIS C 3202- SBUEW NEMA IS : 13730-12/ NEMA IS : 13730-26/ IEC-60317-26/ NEMA MW-81C MW-80C MW-79C MW-82C IEC-60317-12/ MW-75C/ IS : 13730-13/ IEC-60317-13/ NEMA MW-35C/ 73C (Hermetic) IS : 13730-22/ IEC-60317-22/ NEMA MW-76C MW-28C IS : 13730-8/ IEC-60317-8/ NEMA MW-30C/ 72C (Hermetic) JIS C 3202-EIW IS : 13730-37/ IEC-60317-37 NEMA IS : 13730-34/ IEC-60317-34/ JIS C 3202-PEW IS : 13730-45/ IEC-60317-45 NEMA IS : 13730-3/ IEC-60317-3/ NEMA MW-5C IS : 13730 (Under/ preparation)/ IEC-60317(Under preparation)/ NEMA MW-24C NEMA MW-15C/ JIS C 3202-UEW JIS C 3202-PVF Thermal Class Chemical base of base coat Chemical base of top coat Range of Wire (Diameter) 130 (B) 155 (F) 155 (F) 180 (H) 130 (B) 155 (F) 180 (H) 180 (H) 105/120 130 (B) 200 155 (F) 130 (B) 130 (B) 155 (F) 180 (H) 200 (C) 180 (H) 200 (C) 180 (H) 155 (F) Polyurethane Polyurethane Polyurethane Polyesterimide Polyurethane Polyurethane Polyesterimide Polyurethane Modified Polyvinyl Acetal Polyurethane Polyimide Modified Polyester Polyester Polyester Polyester Polyesterimide Theicpolyester/ Polyesterimide Polyester/ Polyesterimide Polyamideimide Polyesterimide Polyester Nylon Nylon Not applicable Not applicable Polyvinyl Polyvinyl Polyvinyl Not applicable Not applicable Not applicable Not applicable Not applicable Not applicable Not applicable Not applicable Not applicable Polyamideimide Nylon Not applicable butyral/ Polyamide butyral/ Polyamide Polyvinyl butyral/ Polyamide Polyamide butyral/ Polyamide 1.42-0.20 mm 1.42-0.20 mm 1.42-0.20 mm 1.42-0.20 mm 1.42-0.20 mm 1.42-0.20 mm 1.42-0.20 mm 1.42-0.20 mm 1.42-0.20 mm 1.42-0.20 mm 1.42-0.20 mm 1.42-0.254 mm 1.42 -0.20 mm 1.42 -0.20 mm 0.80-0.20 mm 1.42 -0.20 mm 1.42 -0.20 mm 0.80-0.20 mm 1.42 -0.20 mm 1.00-0.20 mm 1.42-0.50 mm Heat shock (°C) 155 175 175 200 155 175 200 200 155 155 240 175 155 155 175 200 220 200 220 200 175 Cut through (°C) 170 200 200 265 170 200 265 240 170 170 400 240 240 240 240 300 320 265 350 300 240 Solderable temperature (°C) 375 390 390 470 375 390 470 450 Not applicable 375 Not applicable Not applicable Not applicable Not applicable Not applicable Not applicable Not applicable Not applicable Not applicable Not applicable Not applicable Low coefficient of friction, besides properties of general purpose polyurethane. It is suitable for winding in small size motors, coils of electrical instruments, especially of high speed winding. Low coefficient of friction, besides properties of polyurethane, suitable for winding in small and medium electrical instruments, for high speed winding. Self solderable property with its low dielectric dissipation factor under high frequency. It can be widely used in electrical instruments of machine tools, motors which have special requirements of this type of enamel. Self solderable with high potential both under the dry and humid conditions, good properties in heat shock and cut through, it is suitable for the coils of various motors appliances, instruments and telephone equipments. Solderable, thermoplastic bonded by heat or solvent, used for all self supported coils for television, electronics, small motors, relays, magnets, telephones & voice calls of all kinds can be bonded in forms by heating at 170/180°C Solderable, thermoplastic bonded by heat or solvent, used for all self supported coils for television, electronics, small motors, relays, magnets, telephones & voice calls of all kinds can be bonded in forms by heating at 170/180°C Solderable, thermoplastic bonded by heat or solvent, used for all self supported coils for television, electronics, small motors, relays, magnets, telephones & voice calls of all kinds can be bonded in forms by heating at 170/180°C Good mechanical, electrical & chemical resistant properties. Improved thermal resistance. Fast solderability. Fractional & integral horsepower motors Class 155. Coils & relays. Instrument & audio coils. High mechanical properties, good transformer oil resistance, suitable for 135°C Hermetic appllications, used in oil filled transformers & equipments required high mechanical properties such as auto electricals. Self solderable property with good insulation resistance, high flexibility usedd in all communication equipments, relays magnetic spools, universal & non- impregnated winding of all kind of transformers. Designed for using of wire for product with maximum value of the thermal and mechanical characteristics Upgraded thermo mechanical properties compared to ordinary polyesters, used in ignition coils, oil filled transformers, relays, contractors, fhp motors. This version can also be made for upgraded abrasion. Good thermal & electrical properties, used in general purpose rotating & static electrical equipments, oil transformers, control coils. General purpose 130°C polyster. Good thermal & electrical properties, used in general purpose rotatng & static electrical equipments, oil transformers, control coils. General purpose 155°C polyester with heat shock at higher mandrel diameter. Good thermal & electrical properties, used in general purpose rotating & static electrical equipments, oil transformers, control coils. Good resistance against refrigerants, transformer oil. High burnout resistance, used in fhp motors, hermetic application and thermal class 180°C equipments. Very good resistance for refrigerants & chemicals, high burnout resistance, excellent windability, low coefficient of friction, high slotfill factor, used in special motors including Hermetic motors, Armatures, Alternators, Power Tools and high HP motors, suitable for high speed coil winding. Used in all 180°C class equipment requiring high speed machine winding, low coefficient of friction. High burnout resistance, excellent windability, low coefficient of friction, high slot fill factor, used in special types of motors & electromotive tools. Class 180°C with self bonding property and all other properties of Polyesterimide. Good mechanical, electrical & chemical resistance properties. Improved for high speed winding. FHP motors, coils & relays, audio & instrument coils. TECHNICAL PROPERTIES AS PER IS:13730-0-1 / IEC-60317-0-1 Special Charactersistics & Application * IS 13730 and IEC 60317 are completely harmonized standards and identical. Packing The product is evenly and compactly wounded on the plastic/wooden spools without deformation, packed in suitable cartoons. Dimensions of the spools are as per table below: Marking Each spool is labelled with the following with indelible ink: i) Manufacturer’s Name ii) Product code iii) Type of enamel. iv) Type of covering. v) Size of wire in swg/mm. vi) Net weight of wire. vii) Batch No. Cylinderical reels acc. To IEC 60264-2-2 Storage The spools shall be stored on racks and in dry atmosphere. Please pay attention to the following points when storing wires for a long period of time. i) Never store wires in an area exposed to direct sunlight. ii) Avoid high-humidity environments. iii) Avoid special environments (gasses). iv) Be sure that no electric wire will hit other articles or other wires. v) Never store wires in a dusty area. Wire capacity Type D1 D2 D3 D4 D5 L1 L2 160 160 100 22 - - 160 128 6 kg 200 200 125 22 - - 200 160 12 kg 250 250 160 22 - - 200 160 20 kg 355 355 224 34 - - 200 160 40 kg 500 500 315 36 - - 250 180 80 kg Round According to DIN 46395 We are touching your lives at every point D710 710 500 51 - - 250 180 180 kg D8p 800 400 40 - - 270 200 320 kg