Edixeon Series
Edixeon R White Series
Datasheet
Features :
■■
Various colors
■■
More energy efficient than incandescent and most halogen lamps
■■
Low voltage operation
■■
Instant light
■■
Long operating life
Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
version : 3
1
Table of Contents
General Information..........................................................................................................................................................3
Absolute Maximum Ratings...........................................................................................................................................4
Characteristics.....................................................................................................................................................................4
Luminous Flux Characteristic.........................................................................................................................................5
Mechanical Dimensions...................................................................................................................................................6
Characteristic curve...........................................................................................................................................................7
Reflow Profile.......................................................................................................................................................................14
Reliability...............................................................................................................................................................................15
Product Packaging Information....................................................................................................................................16
Revision History..................................................................................................................................................................17
About Edison Opto............................................................................................................................................................17
Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
version : 3
2
General Information
Introduction
Edixeon R series emitters are one of the highest flux LEDs in the world by Edison Opto. Edixeon
R Series emitters are designed to satisfy more and more Solid-State lighting High Power LED
applications for brilliant world such as flash light, indoor and outdoor decoration light.
Edixeon R Series emitters are designed by particular package for reflow process application. Unlike
most fluorescent sources, Edixeon R Series contains no mercury and has more energy efficient than
other incandescent light source.
Ordering Code Format
2
E
R1
0x
xW
xx
000
xxx
X1
X2
X3
X4
X5
X6
X7
X8
X1
X2
X3
X4
X5
Type
Component
Series
Wattage
Color
2
Emitter
E
Edixeon
R1
R Series
X6
X7
X8
Internal code
PCB Board
Serial Number
-
-
000
-
--
01
1W
CW
Cool White
03
3W
NW
Neutral White
WW
Warm White
--
Ordering Code Format (Emitter on Star )
5
E
R1
0x
xW
S
X1
X2
X3
X4
X5
X6
X7
X8
X1
X2
X3
X4
X5
Type
Component
Series
Wattage
Color
5
S
001 xxxx
Module
E
Edixeon
R1
R1 Series
X6
X7
X8
PCB Board
Emitter Nmber
Serial Number
Star
001
--
--
01
1W
CW
Cool White
03
3W
NW
Neutral White
WW
Warm White
--
Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
version : 3
3
Absolute Maximum Ratings
Parameter
Symbol
[1]
DC Forward Current
Peak Pulsed Current; (tp≤100μs, Duty cycle=0.25)
[2]
(1W)
(3W)
(1W)
(3W)
Reverse Voltage
IF
Ipulse
Value
Units
350
700
500
1000
mA
mA
VR
5
V
VD
5
V
TJ
125
°C
Operating Temperature
-
-30 ~ +110
°C
Storage Temperature
-
-40 ~ +120
°C
ESD Sensitivity (HBM)
-
2,000
V
Soldering Temperature
-
260
°C
Manual Soldering Time at 260˚C(Max.)
-
5
Sec.
Drive Voltage
LED Junction Temperature
[3]
Notes:
1. Proper current derating must be observed to maintain junction temperature below the maximum at all time.
2. LEDs are not designed to be driven in reverse bias.
3. tp: Pulse width time
4. Allowable reflow cycles are 3 times for each LED.
Characteristics
Parameter
Viewing Angle
Forward voltage
Thermal resistance
∆VF/∆T
(Typ.)
Symbol
Value
Units
2Θ1/2
135
Degree
VF
3.4
-
11
∆VF/∆T
-2
CCT
λd
CRI
-
JEDEC Moisture Sensitivity
-
CW: 5,000-10,000
NW: 3,800-5,000
WW: 2,670-3,800
CW: 70
NW: 75
WW: 80
Level 2a
Floor Life
Conditions: ≤30˚C / 60% RH
Soak Requirements(Standard)
Time (hours): 120+1/-0
Conditions: 60˚C / 60% RH
V
o
C/W
mV/ ˚C
K
-
-
Notes:
1. Wavelength is measured with an accuracy of ± 1nm.
2. CCT is measured with an accuracy of ± 5%.
3. Viewing anlge is measured with an accuracy of ± 5%.
4. Color Rendering index CRI tolerane: ± 2.
Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
version : 3
4
Luminous Flux Characteristic
Luminous Flux Characteristics, Tj=25˚C.
Color
Wattage
(W)
1
Cool White
3
1
Neutral White
3
1
Warm White
3
Group
Min. Luminous
Flux(lm)
Max. Luminous Forward Current
Flux(lm)
(mA)
U3
100
110
V1
110
120
V2
120
130
V3
130
140
V4
140
150
W1
160
180
W2
180
200
W3
200
220
X1
220
240
U2
90
100
U3
100
110
V1
110
120
V2
120
130
W1
160
180
W2
180
200
W3
200
220
T3
80
86.5
U1
86.5
90
U2
90
100
U3
100
110
V5
150
160
W1
160
180
W2
180
200
Order Code
350
2ER101CW06000001
(non star)
5ER101CWS0010001
(on star)
700
2ER103CW06000002
(non star)
5ER103CWS0010002
(on star)
350
2ER101NW05000001
(non star)
5ER101NWS0010001
(on star)
700
2ER103NW05000001
(non star)
5ER103NWS0010003
(on star)
350
2ER101WW05000001
(non star)
5ER101WWS0010001
(on star)
700
2ER103WW05000001
(non star)
5ER103WWS0010007
(on star)
Notes:
1. Flux is measured with an accuracy of ± 10%.
2. All Cool White, Neutral White, Warm White emitters are built with InGaN.
Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
version : 3
5
Mechanical Dimensions
Emitter Type Dimension
3.60
Lens
08.00
Housing
1.50
Lead
Cathode (-)
Anode (+)
1.30
Slug
6.50
5.69
2.70
5.30
1.05
11.90
14.50
Emitter Type Circuit
Slug
Star Type Dimensions
3.2
0±
0.3
Edixeon
19.90±0.30
0
19.00±0.20
6-R1.6
Pad
1.6±0.2
6.9±0.2
Star
Edixeon R series dimensions and circuits
Notes:
1. All dimensions are in mm.
2. Lambertian and side emitting series slug has polarity as anode.3. It is important that the slug can’t contact aluminum surface. It is
strongly recommended that there should coat a uniform electrically isolated heat dissipation film on the aluminum surface.
Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
version : 3
6
Characteristic curve
Color Spectrum
1.2
Cool White
Normalized luminous Intensity
1.0
Neutral White
Warm White
0.8
0.6
0.4
0.2
0.0
400
500
600
700
800
Wavelength(nm)
Color Spectrum at a typical CCT for Edixeon R White
Radiation Angle
Normalized
Luminous
Intensity (%)
Relative
Intensity(%)
100
80
60
40
20
0
-100
-80
-60
-40
-20
0
20
40
Angular Displacement(Degree)
Angle (Degree)
60
80
100
Radiation Angle for Edixeon R White
Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
version : 3
7
Forward Current vs. Forward Voltage
600
Forward Current (mA)
500
400
300
200
100
0
3
3.2
3.4
3.6
3.8
4
Forward Voltage (V)
Forward Current vs. Forward Voltage for 1W White
1000
Forward Current (mA)
900
800
700
600
500
400
3
3.2
3.4
3.6
3.8
4
Forward Voltage (V)
Forward Current vs. Forward Voltage for 3W White
Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
version : 3
8
Relative Luminous Intensity vs. Forward Current
1.6
Relative Lumnious Intensity
1.4
1.2
1.0
0.8
0.6
0.4
100
200
300
400
500
600
Forward Current (mA)
Relative Luminous Intensity vs. Forward Current for 1W White
1.6
Relative Lumnious Intensity
1.4
1.2
1.0
0.8
0.6
0.4
200
400
600
800
1000
1200
Forward Current (mA)
Luminous Intensity vs. Forward Current for 3W White
Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
version : 3
9
Relative Luminous Flux vs. Junction Temperature
1.10
Relative Luminous Intensity
1.05
1.00
0.95
0.90
0.85
0.80
0
20
40
60
80
100
120
140
o
Junction Temperature ( C)
Relative Luminous flux vs. junction temperature for Edixeon R White
Forward Voltage vs. Junction Temperature
3.50
Forward Voltage (VF)
3.45
3.40
3.35
3.30
3.25
3.20
0
20
40
60
80
100
120
140
o
Junction Temperature ( C)
Forward voltage vs. junction temperature for Edixeon R White
Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
version : 3
10
Δx,Δy vs. Forward Current
0.003
Δx
Δy
0.002
Δx,Δy
0.001
0.000
-0.001
-0.002
-0.003
100
200
300
400
500
600
Forward Current (mA)
Δx,Δy vs. Forward Current for 1W White
0.003
Δx
Δy
0.002
Δx,Δy
0.001
0.000
-0.001
-0.002
-0.003
200
400
600
800
1000
1200
Forward Current (mA)
Δx,Δy vs. Forward Current for 3W White
Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
version : 3
11
Δx,Δy vs. Junction Temperature
0.015
Δx
Δy
0.010
Δx,Δy
0.005
0.000
-0.005
-0.010
-0.015
0
20
40
60
80
100
Junction temperature (oC)
Δx,Δy vs. Junction temperature for Edixeon R White
120
Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
140
version : 3
12
Maximum Current vs. Ambient Temperature
420
Maximum Current (mA)
350
280
210
140
70
0
0
20
40
60
80
100
120
140
120
140
o
Ambient Temperature ( C)
Maximum Current vs. Ambient Temperature for 1W White
840
Maximum Current (mA)
700
560
420
280
140
0
0
20
40
60
80
100
Ambient Temperature (oC)
Maximum Current vs. Ambient Temperature for 3W White
Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
version : 3
13
Reflow Profile
The following reflow profile is from IPC/JEDEC J-STD-020D which provided here for reference.
Reflow Profiles
Classification Reflow Profiles
Profile Feature
Pb-Free Assembly
Preheat & Soak
Temperature min (Tsmin)
Temperature max (Tsmax)
Time (Tsmin to Tsmax) (ts)
150 °C
200 °C
60-120 seconds
Average ramp-up rate (Tsmax to Tp)
3 °C/second max.
Liquidous temperature (TL)
Time at liquidous (tL)
217 °C
60-150 seconds
Peak package body temperature (Tp)*
255 °C ~260 °C *
Classification temperature (Tc)
260 °C
Time (tp)** within 5 °C of the specified classification temperature (Tc)
30** seconds
Average ramp-down rate (Tp to Tsmax)
6°C/second max.
Time 25oC to peak temperature
8 minutes max.
Notes:
1. * Tolerance for peak profile temperature (Tp) is defined as a supplier minimum and a user maximum.
2. ** Tolerance for time at peak profile temperature (tp) is defined as a supplier minimum and a user maximum.
Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
version : 3
14
Reliability
NO .
Test Item
Test Condition
-40°C~100°C
30, 30, mins
-40°C~100°C
15, 15 mins ≦10 sec
Remark
1
Temperature Cycle
100 Cycle
2
Thermal Shock
3
Resistance to Soldering Heat
TSOL=260°C, 30 sec
3 times
4
Moisture Resistance
25°C~65°C 90% RH
24 hrs / 1 cycle
10 Cycle
5
High-Temperature Storage
TA=100°C
1,000 hrs
6
Humidity Heat Storage
TA=85°C
RH=85%
1,000 hrs
7
Low-Temperature Storage
TA=-40°C
1,000 hrs
8
Operation Life test
25°C
1,000 hrs
9
High Temperature
Operation Life test
85°C
1,000 hrs
10
High Humidity Heat Life Test
85oC, 85%RH
1,000 hrs
11
ON/OFF Test
30 sec ON, 30 sec OFF
10W times
100 Cycle
Failure Criteria
Item
Criteria for Judgment
Min.
Max.
Lumen Maintenance
85%
-
Δu'v'
-
0.006
Forward Voltage
-
Initial Data x 1.1
Reverse Current
-
10 μA
Resistance to
Soldering Heat
No dead lamps or visual damage
Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
version : 3
15
Product Packaging Information
0.2
±
1.5
(-)
14.8±0.2
24±0.2
0
0.35±0.2
12±0.2
15.81±0.2
4±0.2
11.5±0.2
Tape and Reel Dimension
(+)
5.75±0.2
Cover Tape
Carrier Tape
Leader Length 20Pockets
Edixeon Emitter
Humidity Indicator
13" Reel
Seal
Label
Label
Moisture absorbent material
Moisture proof bag
1000pcs LEDs inside
艾笛 森光電股 份有 限公 司
ED ISON O PTO CO PO RA TION
Pa rt N o: E DE W- KL C8 -B 3
Group : UZ 1V 03
In sp ec ted by :
Co lor: Wh it e
Qu anti ty:
100 0
RO HS
A4 100000 05
Di rec tive C omplia nce
Te l +86- 2- 8227 6996 Fa x +8 6-2- 82 27-6 997
4F N o. 800 Chun g- Chen g ., C hun g- Ho C ity Taip ei . Taiw an
5 boxes in 1 carton
2 bags in 1 box
Note : 445*410*415 (Tolerance : ±5mm)
Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
version : 3
16
Revision History
Versions
Description
Release Date
1
Establish order code information
2014/05/19
2
Add Star Type Dimensions
2014/06/04
3
Add on star order code
2014/06/25
About Edison Opto
Edison Opto is a leading manufacturer of high power LED and a solution provider experienced
in LDMS. LDMS is an integrated program derived from the four essential technologies in LED
lighting applications- Thermal Management, Electrical Scheme, Mechanical Refinement, Optical
Optimization, to provide customer with various LED components and modules. More Information
about the company and our products can be found at www.edison-opto.com
Copyright©2014 Edison Opto. All rights reserved. No
part of publication may be reproduced or transmitted
in any form or by any means, electronic or mechanical,
including photo copy, recording or any other
information storage and retrieval system, without
prior permission in writing from the publisher. The
information in this publication are subject to change
without notice.
www.edison-opto.com
For general assistance please contact:
service@edison-opto.com.tw
For technical assistance please contact:
LED.Detective@edison-opto.com.tw
Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
version : 3
17