Migrate Towards Simplicity
HUAWEI Telecom Energy Solutions
HUAWEI TECHNOLOGIES CO., LTD.
F
ull connected world cannot build without network, power supply
become a key factor in network reliability. Along rapid development of
telecommunication industry, site number tends to be explosive and the
growth rate of energy cost exceeds increase of income. Low energy efficiency
and weak expansion ability of traditional site hardly meets requirements of
building a green broadband network and reducing operational cost. How to
effectively deploy sites, elevate energy efficiency and reduce carbon emissions
while improving the power supply and environment assurance reliability, has
become common challenges faced by enterprises and operators globally.
H
uawei, with extensive experiences in digital technology, network
technology, M2M, software, big data, and power electronics, is
promoting legacy telecom power onto a new level, where energy
can be accessed anytime, anywhere, energy utilization becomes simpler, energy
management becomes smarter and energy facility is always ready to facilitate
network evolution. MTS (Migrate Towards Simplicity) makes everything simple,
ensures more efficient network and operation. Let's build a better connected
world, together.
Contents
•• Large Capacity Power System
100A-24,000A/6kW-1,440kW
•• Indoor Power System
100A-600A/6kW-36kW
•• Outdoor Power System
100A-400A/6kW-24kW
•• Wall-mounted Power System
30A-60A/1.74kW-3.2kW
•• Embedded Power System
30A-400A/1.74kW-24kW
•• Monitoring Modules
SUM02B/ECC500
•• Rectifier Modules
15A-100A/870W-6,000W
•• Advanced Energy Storage Modules
ESM-A2400Wh(D)/ESM-A9600Wh(N)
Large capacity power
(100A-24,000A)
Wall-mounted power
(30A-60A)
Indoor power
(100A-600A)
Outdoor power
(100A-400A)
Embedded power
(30A-400A)
•• New Generation Outdoor Solution
MTS9000A
•• PowerCube 1000 - Solar Hybrid
PowerCube S1/S2/S3
•• PowerCube 1000 - Diesel Hybrid
PowerCube D1-Standard/D1-Advanced
•• PowerCube 1000 - Grid Hybrid
PowerCube G2/G3/G4/G4-Mini
•• PowerCube 500
IVS Solution
•• Energy OSS
NetEco
MTS9000A
Grid Hybrid
6
Solar Hybrid
IVS Solution
Diesel Hybrid
NetEco
Large Capacity Power System
100A-24,000A/6kW-1,440kW
Introduction
Huawei new generation all-digital large capacity power systems
include TP483000D, TP482000B and TP481200B. Adopting high
power desity design and 1U 100A or 50A high efficiency rectifiers,
single rectiifer cabinet can output maximum 3000A/180kw. The
systems have tremendous features such as high reliability, high
efficiency, high power density, high capacity, low noise and easy
maintenance.
Application Scenarios
TP481200B TP482000B
Integrated Type
TP483000D
Distributed Type
•• Wireless network central office
•• Fixed network central office
•• Large capacity convergence site
•• Enterprise network central office
•• Data center
Legacy
power
Reuse AC & DC
distribution
Newly-built scenario
Reuse AC
distribution
All swap
Legacy power system
modernization
Features
•• Carrier class high reliability, system MTBF over 500,000 hours,
passed over 1000 test items
•• Green and energy saving, rectifier efficiency over 96%
•• Compact design, single rectifier cabinet can output maximum
3000A/180kw,which is the highest in industry
•• Huge system capacity, TP483000D can be expanded to 24,000A
by parallel combination matching network evolution, while
TP482000B expanded to 10000A and TP481200B expanded to
6000A
•• Flexible remote monitoring mode, saving OPEX
1
Specifications
Integrated large power system
Product style
Dimension
(W×D×H)
System
Cabling mode
Rated capacity
DC Distribution
Rectifier Module
TP482000B-N20C5
TP482000B-L20B5
600mm×600mm×2000mm
Top inlet & outlet
1200A(12×100A)
2000A(20×100A)
2000A(40×50A)
220/380VAC, three phase four/five line (L1, L2, L3, PE or L1, L2,
L3, N, PE)
120/208VAC, three phase
four/five line
Input voltage
260VAC-530VAC, rated: 380VAC
90VAC-290VAC,
rated: 208VAC
Input capacity
2×150A/3P (MCCB)
2×150A/3P (terminal)
2×230A/3P (terminal)
Battery branch
2×(1000A×2) (NT4)
2×(1000A×2) (NT4)
2×(1000A×2) (NT4)
Load branch
6×500A(NT3), 6×160A(NT00),
6×100A(NT00)
6×500A(NT3), 6×160A(NT00),
6×100A(NT00)
6×500A(NT3), 6×160A(NT00),
6×100A(NT00)
Input mode
Three phase, 260VAC-530VAC
120V or 240V dual live wire
100A/6000W
50A/3000W
Input mode
AC Distribution
TP4812000B-N20C3
Rated capacity
Distributed large power system
Product style
Cabinet style
AC Distribution
Cabinet
600mm×600mm×2000mm
Input mode
220/380VAC, three phase four/five line (L1, L2, L3, PE or L1, L2, L3, N, PE)
Input voltage
260VAC-530VAC, rated: 380VAC
Input capacity
1×630A/4P (two inputs/manual switchover)
1×400A/4P (two inputs/manual switchover)
AC output
6×160A/3P (MCCB)
1×63A/3P (MCB)
1×32A/3P (MCB)
3×32A/1P (MCB)
4×160A/3P (MCCB)
1×63A/3P (MCB)
1×32A/3P (MCB)
3×32A/1P (MCB)
Cabinet style
TPD48302B-N20B1
Output voltage
Maximum capacity
Battery branch
Rectifier Cabinet
800mm(W)×600mm(D)×2000mm(H)
42-58VDC, default value: 53.5VDC
3000A/180kW
2×(1250A×2) (NT4)
Load branch
8×500A(NT3), 4×400A(NT2), 4×200A(NT1), 8×160A(NT00), 6×100A(NT00)
Cabinet style
TPR48302B-N20C3
Dimensions(W×D×H)
Rated capacity
2
TPA38401B-N20B1
Dimension
(W×D×H)
Dimensions
DC Distribution
Cabinet
TP483000D
TPA38631B-N20B1
TPR48202B-N20C3
600mm×600mm×2000mm
3000A/180kW(30×100A/6kW)
2000A/120kW(20×100A/6kW)
Indoor Power System
100A-600A/6kW-36kW
Introduction
The indoor power systems include integrated power(built-in
batteries) and detached power(separated batteries), whose output
range varies from 100A to 600A. The series can accommodate
high efficiency rectifier modules and have outstanding monitoring
functions, and have been applied in multiple indoor scenarios.
Application Scenarios
•• Indoor site of access network
•• Indoor site of convergence network
•• Medium and small capacity central office
•• Enterprise communication network
TP48300B/TP48600B Mini TP48300B
Combined Type
supporting solar evolution
Unified NetEco
Integrated Power
Mini Power
Detached Power
supporting solar evolution
High temp. battery
Features
•• High rectifier efficiency (>98%) and non-derating below 55ºC
help save energy
•• Footprint saving, 50% footprint saved by integrated power, ‘0’
footprint for rack stack / wall-mounted of mini power
•• Large housing ability, up to 8 BBUs accommodation
•• Intelligent battery management prolongs battery lifespan
•• Support in-band transmission networking, ‘0’ extra data
collector and transmission link cost
•• All-in-one controller, MIMO* energy scheduling mgmt., 5 AI, 9
DI, 8 DO
•• Support solar access, saving grid expenditure
•• High-temp. battery saves 70%-80% site A/C consumption
TP48200B/400B/600B
Integrated Type
*MIMO: Multiple energy input, multiple mode output
3
Specifications
Integrated power system
Product type
Dimension
(W×D×H)
TP48200B
TP48400B
TP48600B
600mm×600mm×2000mm
600mm×600mm×2000mm
600mm×600mm×2000mm
Rated capacity
200A
400A
600A
Battery space
16-32U(2-4×190Ah)
32U(4×190Ah)
24U(3×190Ah)
User space
0-16U
N/A
N/A
Input mode
220V single phase
380V three phase
110V dual-wire
220V three phase
380V three phase
220V three phase
380V three phase
LLVD: (MCB)5 branches
BLVD: (MCB)6 branches
LLVD: (MCB)10 branches
BLVD: (MCB)8 branches
LLVD: (fuse)4 branches+(MCB)10
branches
BLVD: (MCB)6 branches
Load branches
Combined power system
Product type
Dimension
(W×D×H)
Rated capacity
Installation mode
Input mode
Load branches
4
TP48300B
TP48600B
Mini TP48300B
600mm×400mm×1600mm
600mm×400mm×1600mm
442mm×360mm×480mm
300A
600A
300A
Antistatic floor/ ground installation
Antistatic floor/ ground installation
On the battery rack, 19/21/23 inches
open rack, ground, DFMU cabinet,
wall-mounted
220V single phase
380V three phase
220V three phase
380V three phase
220V single phase
380V three phase
110V dual-wire
LLVD: (fuse)7 branches+ (MCB)3
branches
BLVD: (MCB)4 branches
LLVD: (fuse)5 branches+ (MCB)7
branches
BLVD: (MCB)9 branches
LLVD: (MCB)8 branches
BLVD: (MCB)6 branches
Outdoor Power System
100A-400A/6kW-24kW
Introduction
TP48200A(TP48400A) is an AC/DC outdoor power system
that configures 48V/50A rectifier modules to supply rated of
200A(400A) output current, with various cooling system: heat
exchanger(HEX), direct ventilation(DV) and TEC cooling. The power
system has excellent performance such as wide range of AC input
voltage, high power efficiency, intelligent battery management and
remote monitoring.
Application Scenarios
TP48200A/TP48400A
Integrated Type
•• Outdoor carrier’s wireless site power scenarios
•• Outdoor enterprise communication network power scenarios
WIRE(2U)
POWER
(6U)
R
R
U
……
R
R
U
WIRE(2U)
TMC
WIRE(2U)
TMC
POWER
(6U)
BBU(2U)
POWER
(6U)
BBU(2U)
BBU(2U)
BBU(2U)
R
R
U
R
…… R
U
BBU(2U)
BBU(2U)
SPARE
SPARE
SPARE
RFC
BATTERY
Typical outdoor
DBS
BATTERY
Typical outdoor
BTS
RFC
BATTERY
Typical outdoor
DBS+BTS
Features
TP48200A
Separated Type
•• Cooling capacity up to 1500W, operation temperature can be
-40ºC-45ºC, IP55 protect level, protect main equipment to be
safe and reliable
•• High power efficiency of rectifier >98%, intelligent rectifier
dormancy, saving energy
•• Support electronic labels, can be co-managed by HUAWEI main
equipment OSS, saving management and maintenance cost
•• Intelligent battery management and online test, prolonging
battery lifespan
•• Cooling system equipped in door, easy maintance
TBC300A
Separated Type
5
Specifications
Integrated cabinet steel series(1.5m Height)
Product Type
System capacity
Dimension
(W×D×H)
Cooling
TP48200AHD15A6
TP48200AHD15A9
TP48200AHT15A5
TP48200AHT15A6
TP48200AHX15A1
650mm×650mm×1500mm
HEX(850W)+DV
220V/380V
User space
9U
Heater
TP48200AHD15A8
200A
Input mode
Battery space
TP48200AHD15A7
HEX(850W)+TEC
110V
220V/380V
110V
220V/380V
HEX(850W)
110V
220V/380V
25U
16U(2×190Ah)
N/A
N/A
500W
N/A
Heat by TEC
500W
N/A
Integrated cabinet steel series(0.9m Height)
Product Type
System capacity
Dimension
(W×D×H)
Cooling
TP48120A-HD09A1
HEX(1500W) +DV
220V/380V
User space
8U
Heater
TP48120A-HD09A3
TP48120A-HD09A4
650mm×650mm×1500mm
Input mode
Battery space
TP48120A-HD09A2
120A
HEX(850W) +DV
110V
220V/380V
110V
8U(1×100Ah)
500W(Optional)
Separated power cabinet series
Product Type
System capacity
Dimension
(W×D×H)
Cooling
TP48200A-HX09A5
TP48200A-HX09A6
TP48200A-HX09A7
200A
650mm×650mm×900mm
HEX(850W)
Input mode
220V single phase/380V three phase
User space
11U
110V dual-live wire
N/A
15U
Separated battery cabinet series
Product Type
Dimension
(W×D×H)
Cooling
Battery space
Heater
6
TBC300A-DCA7
TBC300A-DCA6
TBC300A-TCA3
650mm×650mm×900mm
DV
DV
TEC
Without heater
Heat by TEC
16U(2×190Ah)
With heater (500W)
Wall-mounted Power System
30A-60A/1.74kW-3.2kW
Introduction
TP4860C and TP4860H are 2 types of wall-mounted power system,
which can convert from 220VAC single-phase or 110VAC dual-live
wire input to stabilized -48V DC output. Its largest capacity is 60A.
When configured with inverter, it can output -48VDC and 220VAC
simultaneously . It can be built in 20Ah/40Ah VRLA battery. It
provides great performance such as compact design, high efficiency
and flexible power backup.
Application Scenarios
•• Wireless coverage sites power supply
•• WLAN power supply
Remote power supply
TP4860H
Small site power supply
Features
•• High rectifier efficiency over 96% helps to save energy, output
without derated below 55ºC
•• Support built-in inverter to output AC&DC simultaneously
•• Support flexible installation mode, such as wall mounted, pole
mounted and grounding installation
•• High protection level of IP55
•• Low noise and high environment adaptability
TP4860C
7
Specifications
Wall-mounted power system
Type
TP4860H
Dimension
(W×D×H)
System
450mm×300mm×580mm
TP4860C
450mm (excluding 50mm protuberant part
on the vent port)×300mm×630mm
Rated capacity
DC: 1740W / 2000W / 3200W, AC: 700W (1000VAC)
Cooling mode
Natural cooling
DV
Wall-mounted / floor-mounted
Wall-mounted / pole-mounted / floor-mounted
IP21
IP55
Installation mode
Protection level
AC input
Inverter output (optional)
220VAC single phase or 110VAC dual-live wire
3 branches
AC Distribution
AC SPD
Signal port SPD
20kA/40kA, 8/20µs
3kA/5kA, 8/20µs
Maximum output
3200W
Battery branch
1 branch
DC Distribution
BLVD
DC SPD
Rectifier
Rated power
Sensors interface
Signal input
3 branches
N/A
10kA / 20kA, 8/20µs
870W, 1000W or 1600W (optional)
Battery temperature, door, battery mid-point voltage check
7 Digital input
Controller
Alarm output
4 Dry contact output
Communication port
RS485 / RS232
Rated output
1000VA/700W
Inverter (optional)
Working mode
Default by DC input priority
Rated capacity
20Ah/40Ah VRLA battery or 40Ah lithium battery
Normal voltage
12V
Battery (optional)
8
Embedded Power System
30A-400A/1.74kW-24kW
Introduction
This series of embedded power products includes 5 types of
products: ETP4830, ETP4890, ETP48150, ETP48200 and ETP48400.
They can provide wide range of DC output from 30A to 400A,
and are very broad application in DC power system scenarios. The
functional unit using a standardized installation structure design,
power height ranging from 1U to 11U, compact design, support
19-inch rack or cabinet installation. The system can be adapted
to a wide range of AC input voltage, with intelligent battery
management, remote monitoring, etc.
ETP4830
ETP4890
Application Scenarios
ETP48150
•• Access network
•• Transmission network
•• Wireless base station
•• Communication network of enterprise
ETP48200
Newly-built site
Legacy site modernization
Features
•• High rectifier efficiency over 98% helps to save energy, derated
output above 55ºC
•• Rectifier with MTBF > 500,000h helps to save OPEX
•• E-label function, can achieve assets management of the whole
site, easy for assets management and location of problem quality
•• Capacity covers 30A - 400A
•• Smooth expansion of capacity from 200A to 400A and ACDB &
DCDB
•• Only 5U for 200A system, 12kW/U high power density
•• Support 19/21 inch standard rack
•• Standard FE, RS485/232 port , supporting 5 AI, 9 DI, 8 DO
•• Support MIMO (solar access, 24V output, etc.) evolution
ETP48400
*MIMO: Multiple energy input, multiple mode output
9
Specifications
Small and medium capacity embedded power system
Type
ETP4830
Dimension
(W×D×H)
System
Installation mode
Protection level
Input mode
AC Distribution
SPD
Maximum capacity
DC Distribution
Battery breakers
Load breakers
Type
Signal input
Controller
Alarm output
Communication port
442mm×255mm×43.6mm
(1U)
ETP4890
442mm×255mm×86.1mm
(2U)
ETP48150
442mm×255mm×130.5mm
(3U)
Installed on 19-inch rack or cabinet
IP20
220VAC single phase or
110VAC dual-live wire
220/380VAC 3-phase or 220VAC single phase or 110VAC duallive wire
5kA/10kA, 8/20us
2kW
4.8kW
8kW
1 branch
1 branch
1 branch
2 branches
4 branches
8 branches
SMU01A
SMU01B
SMU01C
7 digital input, 2 analog input
2 digital input
8 dry contact output
RS232/485, FE
4 dry contact output
RS232/485
Large capacity embedded power system
Type
System
ETP48200
Dimension
(W×D×H)
482.6mm×330mm×222.5mm(5U)
Installation mode
Installed on 19-inch rack or cabinet
Protection level
Input mode
AC Distribution
220/380VAC 3-phase, 220VACsingle phase, or 110VAC dual-live wire
Output breakers
1 branch
2 branches
30kA/60kA, 8/20us
5kA/10kA, 8/20us
12kW
24kW
Battery breakers
Load breakers
SPD
Signal input
Alarm output
Communication port
10
IP20
1 branch
Maximum capacity
Controller
442mm×330mm×489.5mm(11U)
Input breakers
SPD
DC Distribution
ETP48400
2 branches
Maximum 10 branches
16 branches
10kA/20kA, 8/20us
6 digital input, 1 door magnetism, 1 water logging, 1 smoke, 2 temperature, 1 battery
temperature, 1 environment temperature and humidity
8 dry contact output
RS232/485, FE
Full Series of Monitoring Modules
SMU02B
Introduction
SMU02B is a type of high-end monitoring unit for site and power.
It can monitor and manage telecom power system, and provides
site monitoring function. LCD screen and keyboard are equipped
in the unit to realize man-machine interaction. It has a serial
communication port and an Ethernet port to realize local and
remote monitoring. SMU02B supports the monitoring management
of HUAWEI’s power system series, including embedded power,
indoor power and outdoor power system.
SMU02B
Features
•• Performs comprehensive power management and intelligent
battery management
•• Grid quality detection
•• Support time, voltage, capacity disconnecting protection and
LLVD1, LLVD2, BLVD
•• Supports north CAN and FE ports accessing and support SNMP
protocol through FE interface
•• Support local display and configuration by LCD screen or HTTPS
browsing
•• Supports electronic label function
•• Support remote management and remote software upgrade from
NetEco
•• Supports downloading historical logs and statistics data
•• Provides 5 analog inputs(AI), 12 dry contact outputs(DO) and 9
Boolean value inputs(DI)
•• Provides multiple ports accessing, such as smoke sensor, door
status sensor, water sensor, battery temperature sensor, ambient
temperature and humidity sensor
•• Supports multiple languages, such as English, Chinese, Turkish,
Spanish, Portuguese and German
•• Supports hot plug
11
Full Series of Monitoring Modules
ECC500
Introduction
ECC500(Energy Control Center) is a central control unit of
PowerCube system, which adopts advanced power conversion
technology and intelligent management to maximize efficiency
of energy utilization. It consists of main control module, basic I/
O module, expansion I/O module, GPRS module(optional), D.G.
control module(optional) and one reserved slot.
ECC500
Features
•• Unified controller with comprehensive data acquisition function
•• Supports multiple energy input and adopts advanced energy
scheduling strategic to matching different hybrid power
application scenario.
•• Supports comprehensive management of power, energy storage
system, environment and intelligent equipments.
•• Support remote management and remote software upgrade from
NetEco.
•• Support local display and configuration by LCD screen or HTTPS
browsing
•• Support time, voltage, capacity disconnecting protection and
LLVD1, LLVD2, BLVD
•• Supports electronic label function
•• Supports downloading historical logs and statistics data
•• Provides multiple ports accessing, such as smoke sensor, door
status sensor, water sensor, battery temperature sensor, ambient
temperature and humidity sensor
•• Supports multiple languages, such as English, Chinese, Turkish,
Spanish, Portuguese and German
•• Supports hot plug
•• Support extended IO port
•• Support GPRS communications with NetEco server
12
Full Series of Rectifier Modules
15A-100A/870W-6,000W
Introduction
R4815G
HUAWEI 1U height rectifier module with high efficiency and high
power density can cover the output capacity from 15A to 100A
or from 870W to 6000W. Rectifier efficiency is over 96%, and has
tremendous features such as high reliability, high power density, soft
start, excellent input and output protection, low noise and multimodule paralle.etc. HUAWEI rectifier modules are widely applied in
HUAWEI -48VDC power system such as embedded power, outdoor
power, indoor power and large power system.
R4830G1
R4830G2
Features
•• Full series of high efficiency modules, applied in multiple
scenarios
•• Efficiency over 96%, energy saving
•• 1U height, high power density
•• MTBF over 500,000hours, high reliability
•• Excellent grid and environment adaptability
R4850G
R4850S
R48100G
Specifications
Module style
R4850S
Dimensions (H×W×D)
40.8mm×105mm×281mm
Efficiency
Input voltage
Output power
98%
85-300VAC,
220V single phase or 110V dual live lines
3000W
R4815G1
870W
40.8mm×95.5mm×208mm
R4830G1
R4830G2
>96%
85-300VAC,
220V single phase or 110V dual live lines
1600W
2000W
40.8mm×105mm×281mm
R4850G2
R48100G1
3000W
43mm×238mm×378mm
260-530VAC, three phase three line
6000W
13
Full Series of Advanced Energy Storage Modules
ESM-A2400Wh(D), ESM-A9600Wh(N)
Introduction
HUAWEI advanced Energy Storage Modules(ESM) are a type of
lithium iron phosphate battery integrated with management
system. As an important module of PowerCube diesel hybrid
solution and grid hybrid solution, ESM can be used in off grid
and unstable grid areas. With fast charging adaptability and long
lifespan, ESM can sharply reduce the D.G. running time and O&M
cost comparing with traditional solutions.
ESM-A2400Wh(D)
Features
•• High charge acceptance to ensure rapid and complete recharge
•• Long shelf life up to 2 years at 35ºC due to low self-discharge
•• Good performance at high temperature up to 55ºC
•• Support parallel use and maximum capacity of 28.8kWh in
parallel
ESM-A9600Wh(N)
Specifications
ESM-A2400Wh(D)
Nominal Voltage
Operating Voltage
Charging Voltage@ 25ºC
Recommended Operating Temperature
Self Discharge @ 25ºC
Nominal Capacity
47V-58V DC
56.4V
25ºC-35ºC
Less than 5% after 90 days storage
2400Wh@ 5hr, 25ºC
9600Wh @ 5hr, 25ºC
Approx. 42.5kg
Approx. 125kg
50 A
100 A
ESM-A Dimension(WxDxH)
435mmx420mmx125 mm
440mmx500mmx500mm
ESMU Dimension(WxDxH)
444mmx310mmx44.5mm
Total Weight
Maximum Charging Current Limited
14
ESM-A9600Wh(N)
48V
New Generation Telecom Power Solution
MTS9000A
Introduction
Huawei new generation telecom power solution (MTS9000A) ensures carriers realize network easy deployment, site level
saving, efficient O&M and smooth evolution for its easy, intelligent and high efficiency performance. Huawei MTS system
highly integrates power system, cooling system, site monitor system and housing system to provide safe and reliable
environment for main equipment.
MTS9000A solution could be widely used in outdoor sites.
•• wireless coverage site
•• Transmission node site
Solution
Huawei new generation telecom power solution MTS9000A
provides plentiful intelligent management functions to make
telecom power system easy and high efficiency.
MTS9000A
SOH management
MTS9000A provides SOH management based on monitoring
battery cell SOH & SOC (Status of health, status of charge) in real
time, to prolong battery serving life and avoid site power failure.
SOH
SOC
Access control management
MTS9000A Intelligent access control management system makes
the O&M easier and safer. The electrical lock on the cabinet is
designed to be opened by:
•• authorized card within valid period
•• mobile APP with authorized username and password
•• NetEco remotely
Smart capture
To reduce carrier investment loss due to illegal invasion, MTS9000A
provide intelligent photograph capture function against illegal
activities. The camera mounted on the top of inner cabinet will take
a series of pictures automatically while invasion, and the pictures
will be sent to OSS center(NetEco) immediately
15
Site energy efficiency management
Huawei MTS9000A solution provide energy information collecting
sensors on site to measure energy input and output, the data will
upload to NetEco server for SEE analysis. NetEco could show SEE
status on multiple customized views.
Mobile APP management
Mobile APP management is a new innovative OSS auxiliary function
supported by MTS9000A, customer can not only maintain telecom
site in mobile APP through OSS server, but also log on though WIFI
module integrated in MTS9000A while arrived site. With the help
of mobile APP, customer could realize network management at
anywhere and anytime.
Benefits
•• Easy land acquisition for its compact figure, knockdown type cabinet and Multiple energy input & output
•• Intelligent O&M, Overall energy system and environment monitoring and convenient mobile app supported
•• Easy Evolution, All modular design, easy expansion and upgrading
•• High efficiency, High efficiency rectifier and site & network level efficiency management
16
Accessories
Battery SOC & SOH management
Parameters
Item
Dimension
Installation
Working Voltage
Working Current
Communication
iBox
110mm×142mm×10mm(L×W×H)
Cabinet interior side wall
12V ± 2V
Less than 100mA
Northbound interface: Modbus
Southbound interface: Zigbee
Camera
Parameters
Item
Pixels
Lens
Output Format
Night Vision
Communication
Working Voltage
Working Current
Working temperature
Camera
0.3 Million
6mm infrared
JPEG
Monochrome image, 6m distance
RS485, Modbus,
DC 9-15V
Less than 100mA( night vision, less than 300mA)
-20˚C to 70˚C
Intelligent Electronic Door Lock
Parameters
Item
Working Voltage
Working Current
Unlock
Record
IP level
eLock
12V ± 20%
Less than 60mA
Magnetic card, Live APP, OSS, LUI on site
Unlock time and authorization number
Closed status: IP55
AC Meter
Parameters
Item
Working Voltage
Working Current
Detecting Voltage Range
Detecting Current Range
AC PUE Measurement
Precession
AC Meter
36 to 72 VDC
Less than 100mA
90 to 300VAC
0 to 75A
±1%
EFUSE
Parameters
Item
Dimension
Distribution
SPD
Working Voltage
Maximum Current
EFUSE
442mm×42mm×300mm(W×H×D)
10 Routes, up to 20A/route (5,10,15,20A configurable)
Differ mode: 10kA, ComVmon mode: 20kA; 8/20μs
40 to 60VDC
100A
17
Specifications
Product Model
Base Dimension
(W x D)
Height
Application mode
Cabinet
Cooling mode
Maintenance
Panel material
Battery shelf
Protection level
Power Model
Embedded
Power
Capacity
Input voltage
Input frequency
AC input
AC input SPD
Dimension
Rectifier capacity
Rectifier efficiency
DC distribution
Advanced
Features
Environment
Battery
(optional)
18
Optional Features
Operation
temperature
Storage &
transportation
temperature
Humidity
Specification
Capacity
MTS9510A
(Mini-shelter)
MTS9512A
MTS9513A
815mmx735mm
1.4m, 2.0m, 2.3m
2.0m
2.0m
Equipment cabinet
Battery cabinet
Integrated telecom energy solution
Integrated cabinet
HEX (Only for equipment cabinet and integrated cabinet)
DV/TEC (Only for battery cabinet)
DC/AC Aircon
Front operation & maintenance
Sandwich panel
2/3/4 Layers
IP55 for Aircon and HEX, IP45 for DV
ETP48200-C5B4/ ETP48200-C5B5/
N/A
ETP48200-C5C5
ETP48300-C6A1
C4
C3
N/A
200A
200A
200A
300A
N/A
220/380V
110V dual live
220/380V
220/380V
N/A
45Hz to 66Hz
N/A
MCB:1×63A/3P
MCB:1×100A/2P
N/A
N/A
30kA/60kA (8/20μs)
N/A
N/A
5U
6U
N/A
3000W
N/A
>96%
LLVD:
LLVD:
LLVD:
LLVD:
2×80A/1P, 9×32A/1P
2×80A/1P, 9×32A/1P
2×80A/1P, 3×32A/1P 2×80A/1P, 3×32A/1P
BLVD:
BLVD:
BLVD:
BLVD:
1×63A/1P, 3×32A/1P,
1×63A/1P, 2×32A/1P,
1×63A/1P, 3×32A/1P,
1×63A/1P, 3×32A/1P,
N/A
1×16A/1P
1×16A/1P
4×16A/1P
1×16A/1P
Battery breaker:
Battery breaker:
Battery breaker:
Battery breaker:
2×125A/1P
2×125A/1P
2×125A/1P
4×125A/1P
• Battery SOH management
• Access control management
• Smart capture
N/A
• Mobile APP management
• Site energy efficiency management (unavailable for ETP48300-C6A1)
(Above features are unavailable for ETP48200-C5B4/B5)
-40˚C to +50˚C
-40˚C to +55˚C
-40˚C to +45˚C
-40˚C to +70˚C
5% to 95%
12V/2V
Max. 4x190Ah
12V
Max. 3x190Ah
12V
Max. 2x190Ah
12V
Max. 2x190Ah
12V
Max. 2x190Ah
Hybrid Power-Solar Hybrid
PowerCube S1: Pure Solar Solution
Introduction
Pure solar hybrid solution is currently the most favored choice for green power solutions in many regions for low and medium
load sites.
Scenarios
•• Mountainous areas and isolated islands where the topography is complicated and transportation is inconvenient
•• Scenic spots which require environment protection.
High Efficiency PV
Module: 15%
United Controller with
Advanced SolarMax
Technology
High-temperature Tolerant
Solar Cycle Battery
High Precision MPPT:
Upto 99.8%
Benefits
•• ‘Zero’ OPEX, ‘Zero’ CO2 emission
•• More PV panels saving with advanced SolarMax MPPT(Maximum Power Point Tracking) tech.
•• Multi-anti-theft design to protect assets
19
Configuration
Solution 1 (Outdoor)
Typical Power Load
Solution 2 (Outdoor)
Solution 3 (Outdoor)
Solution 4 (Indoor)
<0.8kW
< 3kW
MPPT(Maximum Power
Point Tracking) box
ECC500(Energy Control Center) with MPPT(Maximum Power Point Tracking) module
Installation Type
Pole-mounted
Ground-mounted
Capacity of SSU
N/A
Max. 8x50A SSU
Capacity of PV Module
Max. 3,000Wp
Max. 24,000Wp
BLVD
1x32A, 2x10A
2x80A, 2x63A
LLVD
N/A
4x32A, 2x16A, 1x10A
Cooling for Equipment
Natural cooling
HEX
Cooling for Battery
Natural cooling
Natural cooling
ICC100
ICC350
ICC310
ICC200
Remaining Space
N/A
7U
26U
31U
Battery Model and
Capacity
TCB-A (Temperature Cycle Battery): 300/400/500/650/800Ah (Max. 4 groups)
SCB-A (Solar Cycle Battery): 200/300/500/600/800Ah (Max. 4 groups)
Controller
EcoCool / Split DC Aircon
Cabinet
Key Technology
20
SolarMax technology includes features such as high precision MPPT(Maximum Power Point Tracking) of upto 99.8%,
high conversion efficiency of 98.50%, high temperature adaptability and high sensation of light.
Hybrid Power-Solar Hybrid
PowerCube S2: Solar & Diesel Solution
Introduction
Solar & D.G. hybrid solution is applicable for modernization of legacy diesel powered sites with medium and high
load in outlying areas.
Scenarios
•• Areas where sunshine duration fluctuates greatly in each month
•• Modernization of legacy D.G. powered sites with limited footprint
•• Systems requiring high reliability requirements
High Pillar Structure &
Anti-theft Bolts
United Controller with
Advanced SolarMax
Technology
IDG: Integrated Diesel Generator
High Efficiency
Rectifier: Upto 96%
Benefits
•• High reliability
•• Maximum usage of solar energy with leading algorithm design
•• Excellent TCO performance with optimized PV & IDG combination
21
Configuration
Solution 1 (Outdoor)
Typical Power Load
Controller
Installation Type
Distribution Capacity
Capacity of PV Module
<3.5kW
ECC500(Energy Control Center)
Ground-mounted
Max. 8x50A (SSU+PSU)
Max. 24,000Wp
BLVD
2x80A, 2x63A
LLVD
4x32A, 2x16A, 1x10A
Integrated Diesel
Generator Capacity
Cooling for Equipment
Solution 2(Indoor)
10/14kW with 3W+N; 11.5/16kW with dual-live wire or reuse
HEX
EcoCool / Split DC aircon
Cooling for Battery
Cabinet
ICC350
ICC310
ICC200
Remaining Space
7U
26U
31U
Battery Model and
Capacity
TCB-A (Temperature Cycle Battery): 300/400/500/650/800Ah (Max. 4 groups)
DCB-A (Deep Cycle Battery): 300/420/490/600/800Ah (Max. 4 groups)
DCB-B (Deep Cycle Battery): 200/300/500/650/800Ah (Max. 4 groups)
Key Technology
22
Natural cooling
SolarMax technology includes features such as high precision MPPT(Maximum Power Point Tracking) of upto 99.8%,
high conversion efficiency of 98.50%, high temperature adaptability & high sensation of light.
Hybrid Power-Solar Hybrid
PowerCube S3: Solar & Grid (Diesel)
Introduction
Solar & Grid hybrid solution is applicable for medium and high load sites with grid connection.
Scenarios
•• Areas having unstable grid, Solar energy acts a complement to the unstable grid
•• Scenarios where Mains supply needs to blend with sustainable energy solution to cut down emission
United Controller with Advanced
SolarMax Technology
Carrier Class Reliability,
Complete SPD Design
Benefits
•• High reliability
•• Solar energy is priority
•• Low TCO, less maintenance costs
23
Configuration
Solution 1 (Outdoor)
Typical Power Load
Controller
Distribution Capacity
Capacity of PV Module
<3.5kW
ECC500(Energy Control Center)
Max. 8x50A (SSU+PSU)
Max. 12,000Wp
BLVD
2x80A, 2x63A
LLVD
4x32A, 2x16A, 1x10A
AC Input
Integrated Diesel
Generator Capacity
Cooling for Equipment
Solution 2 (Indoor)
220VAC (85-300VAC) , 50/60Hz (45-66Hz) , 3-phase & 4-wire
10/14kW with 3W+N; 11.5/16kW with dual-live wire
HEX
EcoCool / Split DC Aircon
Cooling for Battery
Cabinet
ICC310
ICC200
Remaining Space
26U
31U
Battery Model and
Capacity
TCB-A (Temperature Cycle Battery): 300/400/500/650/800Ah (Max. 4 groups)
DCB-A (Deep Cycle Battery): 300/420/490/600/800Ah (Max. 4 groups)
DCB-B (Deep Cycle Battery): 200/300/500/650/800Ah (Max. 4 groups)
Key Technology
24
Natural cooling
SolarMax technology includes features such as high precision MPPT(Maximum Power Point Tracking) of upto 99.8%,
high conversion efficiency of 98.50%, high temperature adaptability & high sensation of light.
Hybrid Power-Diesel Hybrid
PowerCube D1-Standard & D1-Advanced
Introduction
Diesel hybrid solution is suitable for medium and high load sites with high reliability requirement.
Scenarios
•• Modernization of legacy D.G. powered sites with low load rate
•• Areas where Diesel-powered site OPEX is comparatively less than that of the Solar site
•• Areas lacking professional D.G. maintenance engineers
Integrated Diesel Generator
United Controller with
Advanced DieselMax
Technology
Fuel Level Sensor
5 Levels of Anti-theft
Structure Design
Deep Cycle Battery
Benefits
•• Up to 75% fuel saving and 90% D.G. running time saving
•• Up to 97.5% D.G. maintenance cost saving
•• Smooth evolution to Solar Hybrid Solution
25
Configuration
D1-Standard
(Outdoor)
Typical Power Load
Controller
System Capacity
D1-Standard
(Indoor)
D1-Advanced
(Outdoor)
D1-Advanced
(Indoor)
<5kW
ECC500(Energy Control Center)
Max. 6x50A PSU(Standard)
Max. 8x50A PSU(Co-site)
Max. 8x50A PSU
Max. 6x50A PSU
Max. 8x50A PSU
Integrated Diesel
Generator Capacity
10/14kW with 3W+N; 11.5/16kW with dual-live wire(standard/advanced), 10/14kW with 3W+N;(Co-site)
Integrated Fuel Tank
Capacity
800L
BLVD
2x80A, 2x63A(standard/advanced), 1x63A/tenant, total for 4 tenants(Co-site)
LLVD
4x32A, 2x16A, 1x10A(standard/advanced), 1x63A,2x80A/tenant, total for 4 tenants(Co-site)
AC Input
Cooling for Equipment
220VAC (85-300VAC), 50/60Hz (45-66Hz), 3-phase & 4-wire
HEX
HEX
EcoCool / Split DC Aircon
Cooling for Battery
EcoCool / Split DC Aircon
DC Aircon / Free cooling
Cabinet
ICC500
ICC 900
ICC200
ICC500
Remaining Space
12-14U
19-29U
31U
14U
Battery Model and
Capacity
TCB-A (Temperature Cycle Battery):
300/400/500/650/800Ah (Max. 2 groups)
DCB-A (Deep Cycle Battery):
300/420/490/600Ah (Max. 2 groups)
DCB-B (Deep Cycle Battery):
200/300/500/650Ah (Max. 2 groups)
Key Technology
26
DC Aircon / Free cooling
ICC900
ICC200
31U
For ICC500,
ESU-A (Advanced Energy Storage Unit),
Max. 2x200Ah
For ICC900,
ESU-A (Advanced Energy Storage Unit),
Max. 3x200Ah + 2x150Ah backup batteries(optional)
DieselMax Technology includes features such as dynamic load algorithm, high AC to DC conversion efficiency of 96%
and high charging/discharging efficiency of 96%
Hybrid Power-Grid Hybrid
PowerCube G2: Advanced Fast Charging Solution
Introduction
Advanced fast charging system is feasible when electricity grid is unreliable and outage time is short but frequent.
Scenarios
•• Modernization of Grid plus backup D.G. powered sites
•• Areas lacking professional D.G. maintenance engineers
United Controller with
Advanced GridMax Technology
Advanced Energy Storage Unit
Benefits
•• Fast charging: Full charging < 2hrs
•• Energy storage: 4-5 years lifespan
•• ‘Zero’ D.G. running time or removing D.G.
•• Smooth evolution to Solar Hybrid Solution
27
Configuration
G2 (Outdoor)
Typical Power Load
G2 (Indoor)
<5kW
Controller
ECC500(Energy Control Center)
AC Input
220VAC (85-300VAC) , 50/60Hz (45-66Hz) , 3-phase & 4-wire
System Capacity
Cooling for Equipment
Max. 6x50A PSU
Max. 8x50A PSU
HEX
EcoCool / Split DC Aircon
Cooling for Battery
BLVD
2x80A, 2x63A
LLVD
4x32A, 2x16A, 1x10A
Cabinet
ICC500
ICC900
ICC200
Remaining Space
14U
14U
31U
Battery Model and
Capacity
ESU-A (Advanced Storage
Energy Unit):
200Ah (Max. 2 groups)
ESU-A (Advanced Storage
Energy Unit):
200Ah (Max. 3 groups)
ESU-A (Advanced Storage Energy Unit):
200Ah (Max. 4 groups)
Key Technology
28
DC Aircon
GridMax Technology includes features such as fast charging, step charging and high adaptability
Hybrid Power-Grid Hybrid
PowerCube G3: Enhanced Fast Charging Solution
Introduction
Enhanced fast charging system is used for areas where electricity grid not only faces often short outages but also
seldom abnormal long outages.
Scenarios
•• Modernization of Grid plus backup D.G. powered sites
•• Areas lacking professional D.G. maintenance engineers
United Controller with Advanced
GridMax technology, Unique Control
Algorithm of Hybrid Energy Storage
Hybrid Energy Storage
Benefits
•• Fast charging: Full charging < 3hrs
•• Energy storage: 4-5 years lifespan
•• ‘Zero’ D.G. running time or removing D.G.
•• Smooth evolution to Solar Hybrid Solution
29
Configuration
G3 (Outdoor)
Typical Power Load
Controller
System Capacity
AC Input
Cooling for Equipment
G3 (Indoor)
<5kW
ECC500(Energy Control Center)
Max. 6x50A PSU
Max. 8x50A PSU
220VAC (85-300VAC) , 50/60Hz (45-66Hz) , 3-phase & 4-wire
HEX
EcoCool / Split DC Aircon
Cooling for Battery
BLVD
2x80A, 2x63A
LLVD
4x32A, 2x16A, 1x10A
Cabinet
Remaining Space
Battery Model and
Capacity
Key Technology
30
DC Aircon
ICC500
ICC900
ICC200
14U
9U
28U
ESU-A (Advanced Storage Energy Unit): 50Ah.
FCB-A (Fast Charging Battery): 200/300/400/500/650Ah
Max. 2x50Ah ESU-A +
1x400Ah FCB-A
Max. 3x50Ah ESU-A +
1x650Ah FCB-A
GridMax Technology includes features such as fast charging,
step charging and high adaptability.
Max. 3x50Ah ESU-A + 1x650Ah FCB-A
Hybrid Power-Grid Hybrid
PowerCube G4: Standard Fast Charging Solution
Introduction
Standard fast charging system is suitable for areas where electricity grid has seldom daily outages.
Scenarios
•• Modernization of Grid plus backup batteries powered sites
•• New-building sites in unstable grid areas
Split DC Aircon
United Controller
with Advanced
GridMax Technology
Fast Charging Battery
Benefits
•• Fast charging: Full charging < 4hrs
•• Energy storage: 3-4 years lifespan
•• ‘Zero’ D.G. running time or removing D.G.
•• Smooth evolution to Solar Hybrid Solution
31
Configuration
G4 (Outdoor)
Typical Power Load
Controller
System Capacity
AC Input
Cooling for Equipment
G4 (Indoor)
<5kW
ECC500(Energy Control Center)
Max. 6x50A PSU
Max. 8x50A PSU
220VAC (85-300VAC) , 50/60Hz (45-66Hz) , 3-phase & 4-wire
HEX
EcoCool / Split DC Aircon
Cooling for Battery
BLVD
2x80A, 2x63A
LLVD
4x32A, 2x16A, 1x10A
Cabinet
Remaining Space
Battery Model and
Capacity
Key Technology
32
DC Aircon / Free cooling
ICC500
ICC900
ICC200
12U
27U
31U
FCB-A (Fast Charging Battery): 200/300/400/500/650Ah
Max. 1x650Ah FCB-A
Max. 2x650Ah FCB-A
Max. 1x650Ah FCB-A
GridMax Technology includes features such as fast charging, step charging and high adaptability.
Hybrid Power-Grid Hybrid
PowerCube G4 Mini: Mini Standard Fast Charging Solution
Introduction
Mini-Standard fast charging system is suitable for areas where the electricity grid suffers from weekly multiple
longtime outages.
Scenarios
•• Modernization of Grid plus backup batteries powered sites
•• New-building sites in unstable grid areas
United Controller with Advanced
GridMax technology
Fast Charging
Battery (12V per cell)
Benefits
•• Fast charging: Full charging < 4hrs
•• Energy storage: 2-3 years lifespan
•• ‘Zero’ D.G. running time or removing D.G.
•• Smooth evolution to Solar Hybrid Solution
33
Configuration
G4 Mini (Outdoor)
Typical Power Load
Controller
System Capacity
AC Input
Cooling for Equipment
G4 Mini (Indoor)
<3kW
ECC500(Energy Control Center)
Max. 6x50A PSU
Max. 8x50A PSU
220VAC (85-300VAC), 50/60Hz (45-66Hz), 3-phase & 4-wire
HEX
EcoCool / Split DC Aircon
Cooling for Battery
BLVD
2x80A, 2x63A
LLVD
4x32A, 2x16A, 1x10A
Cabinet
ICC330
ICC200
Remaining Space
8U
31U
Battery Model and
Capacity
FCB-B (Fast Charging Battery): Max. 2x150Ah
FCB-B (Fast Charging Battery): Max. 4x150Ah
Key Technology
34
Free Cooling
GridMax Technology includes features such as fast charging, step charging and high adaptability
Intelligent Video Surveillance Power Solution
PowerCube500: IVS Solution
Introduction
Intelligent video surveillance demands grow rapidly. HUAWEI IVS solution can be applied in various scenarios from good
grid, poor grid to off grid.
•• National security infrastructure demands in terms of border monitoring, fortress spot protecting and website facility
management will adopt the IVS system, which sites grid are unavailable.
•• As energy saving and environment friendly demands, in densely populated areas will adopt the IVS system, especially
in city, road, square, scenic spot etc.
Scenarios
•• Modernization of Grid plus backup batteries powered sites
•• New-building sites in unstable grid areas
Solar Panel
Camera
Camera
Integrated cabinet,
including battery,
Integrated cabinet,
power converter, etc.
including battery,
power converter, etc.
Grid hybrid IVS solution
Solar hybrid IVS solution
Benefits
•• Higher efficiency, energy saving, green & environment friendly
•• Simplified configuration
•• Easy deployment and footprint saving, pole-mounted or ground installation supported
•• Anti-theft design and assets protected
35
Configuration
Typical Power Load
Solution 2
Solution 3
Solution 4
None Backup Time
Short Backup Time
Long Backup Time
Off Grid
<300 W
<150 W
<150 W
<80 W
Grid
Grid + Battery
Grid + Battery
Solar + Battery
Autonomy Time
0 Hours
2 Hours
12 Hours
72 Hours
Installation Mode
(Cabinet)
Pole Mounted
Pole Mounted
Pole Mounted
/Ground Installation
Pole Mounted
/Ground Installation
Power Supply Source
Height of Pole
Maximum PV Capacity
Input AC Voltage
SPD
36
Solution 1
Typical 6m
N/A
800Wp
110/220 V
N/A
AC port: 5kA/10kA,
FE port: nominal 2kA/6kV
Output Voltage
DC12V
Optional (DC48V PoE, AC 24V, AC 220V)
Protection Level
IP55
Site Energy Management Specialist
iManager NetEco (Site)
Introduction
Network Availability = Communication Availability * Transmission Availability * Energy Availability
Site will be out-of-service during energy interruption. Well managed perfect communication equipment and well
managed perfect transmission equipment together with perfect energy system are not necessarily bring high network
availability and satisfied revenue, unless energy system is simultaneously well managed.
Conventional inefficient manpower-based O&M mode can not meet in depth needs of increasing network scale and
diversified types of energy supply and consumption.
Facing cutthroat competition, we never must be considered as they are now of meticulous management for electricity,
fuel, efficiency and asset, to improve profitability by cutting OPEX.
Scenarios
NetEco is innovated to adapt to these strategies, it is a centralized remote OSS solution for site energy equipment. The
following diagram indicates the unique features and customer values of NetEco solution.
Flexible Server Options:
Small-scale
(<=1000 Sites)
Medium-scale
(<=2000 Sites)
Large-scale
(<=5000 Sites)
NetEco
Mobile APP
Northbound
3rd Party System
Networking
Transmission-Saving
In-band networking solution
In-band
Green Channel
Flexible and Stable
OR
Out-of-band
GPRS/IP/E1
Out-of-band networking solution
Adaptable to
diversified
scenarios
Hybrid Power Systems
Grid Hybrid
Diesel Hybrid Solar Hybrid
Site Power Systems
Indoor Power
Outdoor Power
Embedded
Power
Saving Site data
acquisition
devices-free
Benefits
•• Better back high efficient O&M, makes O&M visible, controllable and manageable; realize automation and information,
reduce manpower site visit; assists preventative maintenance, provides prediction and expert suggestion.
•• Improves power availability, ensures smooth communication, improves QoS and QoE; drives revenue and subscribers
increasing.
•• Makes site energy saving manageable, controllable and measureable; supports PUE analysis and optimization.
37
Configuration
Items
Specifications and/or Features
Small scale
Medium scale
Large scale
1,000 sites per server
2,000 sites per server
5,000 sites per server
System Capacity
In-band transmission
Out-of-band transmission
For some Huawei 3900 G/U/L serials macro sites
IP, GPRS, E1, etc.
Networking mode
Integration with
3rd party
Alarm SNMP northbound interface: supports SNMP v1, SNMP v2c, and SNMP v3;
Performance SNMP northbound interface, based on SNMPv3
Platform function
Supports management of multiple time zones, data backup and restore, online help
Real-time monitoring
GIS site Map (based on Google Map), real-time monitoring, GUI, power supply logics, customized real-time counter
subscription and my workspace
Alarm management
Alarm collection and storage, alarm browse, alarm notification, alarm processing, alarm setting, dry contact alarm
management, alarm masking and alarm thresholds setting
Configuration Mgmt.
Site controller discovery, graphical drag and drop site configuration, batch sites copy and batch parameters modification,
site parameter setting by SMS; configuration data export to EXCEL
Performance and
Report
Security management
Asset management
Value-added features
Historical data collection, query, statistical analysis, report management; customized report, automatic periodic report
Network security management, role and operation authority management, user and password management, operation
authentication, log management, ECC500-based video capture
Inventory data management, asset anti-theft
Overall network battery management, overall network diesel generator and fuel management, site DC power sharing,
Diesel Max II efficiency optimization
Preventative
maintenance
Early-warning: reduces the probability of power failure
Maintenance reminder: D.G. refueling, defected battery changing, etc.
Prospective Prediction
Operating time prediction: D.G. fuel capacity, battery backup time, etc.
Lifespan prediction: Battery remain capacity, discharge times, etc.
Remarks: Features are constrained to the configuration of site hardware and controller software, as well as NetEco versions.
38
Migrate Towards Simplicity
Global Recognition, Market Share No.1
24.7% Market Share of Global Telecom Power in 2013, NO.1 in Industry.
1,600,000+ power system, 170+ countries, 310+ operators
130+ service branches, 1,100+ professional partners, 7×24 hours service
DC Power
98% Efficiency Rectifier
Global Product Leadership
Recommended Excellent
Award for DC Power Market
Solution Award
Frost & Sullivan
CIC
Data Resource: Frost & Sullivan
Copyright © Huawei Technologies Co., Ltd. 2015. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.
Trademark Notice
, HUAWEI, and
are trademarks or registered trademarks of Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names mentioned are the property of their respective owners.
General Disclaimer
The information in this document may contain predictive statements including,
without limitation, statements regarding the future financial and operating results,
future product portfolio, new technology, etc. There are a number of factors
that could cause actual results and developments to differ materially from those
expressed or implied in the predictive statements. Therefore, such information
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Version No.: M3-022333-20141109-C-1.0
is provided for reference purpose only and constitutes neither an offer nor an
acceptance. Huawei may change the information at any time without notice.
www.huawei.com