screw-on
BOLT-on
PSD:2002-8
screw-on
BOLT-on
PSD:2002-16
Specification
Specification
1.0", 25.4 mm
Throat Size
1.0", 25.4 mm
Throat Size
Nominal Impedance*
8Ω
Nominal Impedance*
16 Ω
Minimum Impedance
7.6 ohm @ 3.7 kHz
Minimum Impedance
14.8 ohm @ 3.3 kHz
80 W (AES)
Power Rating*
80 W (EIA-426A)
Power Rating*
580 Hz
Resonance
540 Hz
Resonance
DC Resistance (Re)
6.10 Ω
DC Resistance (Re)
11.90 Ω
Usable Frequency Range
1.2 kHz - 20 kHz
Usable Frequency Range
1.2 kHz - 20 kHz
Recommended Crossover
1.2 kHz / 12 dB
Recommended Crossover
1.2 kHz / 12 dB
106.1 dB
Sensitivity*
Ferrite
Magnet Material
Polyimide
Voice Coil Former
Titanium
Diaphragm Material
2.0", 51 mm
Voice Coil Diameter
Polyimide
Voice Coil Former
34 oz, 0.96 kg
Magnet Weight
2.0", 51 mm
Voice Coil Diameter
Ferrite
Magnet Material
34 oz, 0.96 kg
Magnet Weight
105.8 dB
Sensitivity*
Titanium
Diaphragm Material
MOUNTING INFORMATION
MOUNTING INFORMATION
Overall Diameter
0.018 cu.ft., 0.50 liters
Driver Volume Displaced
0.018 cu.ft., 0.50 liters
Depth
5.25", 133.4 mm
Overall Diameter
5.25", 133.4 mm
Driver Volume Displaced
2.20”, 55.9 mm
Depth
2.20”, 55.9 mm
Net Weight
4.70 lb, 2.1 kg
Net Weight
4.70 lb, 2.1 kg
Shipping Weight
5.00 lb, 2.3 kg
Shipping Weight
5.00 lb, 2.3 kg
Mounting Thread
Mounting Thread
Mounting Holes Diameter
FREQUENCY RESPONSE & impedance curve*
SPL vs Freq
dBSPL
3.00”, 76.2 mm
Mounting Holes B.C.D.
3.00”, 76.2 mm
FREQUENCY RESPONSE & impedance curve*
115
2X 1/4-20 or 3x M6
Mounting Holes Diameter
2X 1/4-20 or 3x M6
Mounting Holes B.C.D.
Ohm
115
20
110
110
105
105
100
100
95
95
SPL vs Freq
dBSPL
Ohm
50
40
30
90
90
10
85
80
80
8
75
75
7
70
65
200 Hz
500
1K
2K
5K
10K
20
85
9
70
65
200 Hz
6
20K
500
1K
2K
5K
10K
12: GOLDEN PDS2002-16B on H290 AVG SPLZ
Notes
Notes
Map
Map
38: GOLDEN PSD2002-8B on H290 SPLZ
Data Measured: Sep 11, 2008 Thr 1:41 pm
Data Measured: Nov 20, 2008 Thr 1:19 pm
4.6.0.371
Person:
Project:
Nov 5, 2013
4.6.0.371
Data Measured: Sep 11, 2008 Thr 1:43 pm
Person:
Project:
Nov 5, 2013
10
20K
From design and manufacturing to the stage or studio. Once you’ve
experienced the performance of Eminence, you’ll never accept
anything else.
mission statement
*footnotes
Eminence is dedicated to providing the best Quality, Value and Service
to meet our customers’ needs.
impedance
Please consult www.eminence.com for specifications of models with alternative
impedances.
Power rating
Multiple units exceed published ratings evaluated under EIA 426A specification while
tested in a free-air, non-temperature-controlled environment. Multiple compression
drivers exceeded published ratings evaluated under EIA-426A or AES specification
while mounted on Eminence’s H290, H290S, or H2EA horn in a non-temperaturecontrolled environment.
Sensitivity
The average output across the usable frequency range when applying 1W/1m into
the nominal impedance. i.e: 2.83V/8Ω, 4V/16Ω. Eminence response curves are
measured under the following conditions: All speakers are tested at 1W/1m using
a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied
microphone (software calibrated) mounted 1m from wall/baffle | 2 ft. x 2 ft. baffle is
built into the wall with the speaker mounted flush against a steel ring for minimum
diffraction | Yamaha P3500S amplifier | 2700 cu. ft. chamber with fiberglass on all six
surfaces (three with custom-made wedges). Compression drivers were tested using
a 2ft x 2ft baffle built into the wall with horn front mounted.
coaxials
BETA 8CX, 10CX, and 12CX are coaxial speakers with tweeter sold separately.
Published usable frequency response contingent upon use of ASD:1001 HF Driver.
Prices, product cosmetics and specifications are subject to change without notice.
eminence speaker llc
838 Mulberry Pike, Eminence, KY 40019
Follow us: