TAPWARE
Model RBA3125-Series
BASYS ‘MID’ MIXER SERIES SENSOR TAP
Key Features
•
•
•
•
•
Modern design
Above bench maintenance
Interchangeable parts
Solar options
Environmentally superior
Description
The Basys ‘Mid’ Mixer is a sensor tap constructed from a chrome
plated die cast body. The unit offers multiple spray options as well as
solar power harvesting.
Hydraulic Requirements
RBA3125-111 Basys Chrome ‘Mid’ Mixer
Inlet: Static Pressure: Sensing Range: Flow Rate: Flow Time: Maximum Temp:
G1/2” Braided Hose connection
200 to 600 kPa
25-150mm (Auto adjusting on Installation)
1.9 & 5.7LPM
On demand
50oC
Features
Power: Standard unit uses 4 x AA batteries accessible above bench (approx. 5 year life based on 8000 cycles per month)
Time out setting: 30 seconds - Maximum time tap will run upon continuous detection.
One tool service: A single allen key provides access to all key components above bench. No additional tools required.
Line purge funtion: Eliminates stagnant water that can lead to bacterial growth.
Sleep mode: With a touch, staff can temporarily turn off the water in order to clean a sink.
Visible diagnostics: Individual external diagnostic LEDs indicate the health and status of key components.
Refer to installation instructions for more detail.
Available Models
RBA3125-111
RBA3125-113
RBA3125-231
RBA3125-233
Basys ‘Mid’ Mixer Sensor Tap, Battery Powered, 5.7LPM Aerated flow
Basys ‘Mid’ Mixer Sensor Tap, Battery Powered, 1.9LPM Laminar spray
Basys ‘Mid’ Mixer Sensor Tap, Solar, 5.7LPM Aerated flow
Basys ‘Mid’ Mixer Sensor Tap, Solar, 1.9LPM Laminar spray
Designers Note
To specify additional options including single temp, high spout, low spout and wall mount, please visit www.rbagroup.co.nz
Important: Installation instructions and current rough-in details should be furnished with each fixture. Do not rough in without certified dimensions. Dimensions are subject
to manufacturer’s tolerance of +/-10mm.
Rough In
SPOUT
Dimensions
51 mm
INTEGRAL SIDE MIXER LEVER
(Can Be Set and Removed)
30mm
MIN.DIA.HOLE
REQUIRED
164 mm
RETAINER
38mm
MAX.DECK
THICKNESS
34 °
20°
90 mm
94 mm
31 mm
NUT
63 mm
330mm
LONG FLEX HOSE
147 mm
380 mm
164 mm
133 mm
TEMPERED
SUPPLY (BY
OTHERS)
57 mm
Basys Sensor Tap
Sloan
Basys Sensor Tap
2
6
Sloan
As improvements in the design and performance of RBA products are continuous, specifications may be subject to change without notice.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 04/13
© 2013 by RBA Group TD/Model RBA3125-Series/0413
AUCKLAND • SYDNEY • MELBOURNE • BRISBANE • PERTH
New Zealand 0800 722 111 • sales@rbagroup.co.nz • www.rbagroup.co.nz
8 mm