Electron
S.R.L.
Design
Production &
Trading of
Educational
Equipment
B2300 – ELECTRONIC CONSTRUCTION KITS
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200
FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it
Rev 00
Specifications may change without notice
Page 1 of 11
File LEAFLET B2300
B2300-K1 – FM RECEIVER KIT
General:
This FM Receiver in kit form is of the latest
design and includes integrated circuitry in all
stages . The panel operates in the 88-108
MHz band.
The kit contains all the electronic
components, circuit boards and hardware
necessary to complete the project.
Printed on the circuit board there is a clear
silk-screen diagram of the component
positions and shapes.
Test points are provided for the execution of
setup, regulation and examination of the
circuit operation.
The FM Receiver consists of the following
sections:
−
−
−
−
RF amplifier/local oscillator/mixer, built
around an advanced feature IC
Varicap tuning and AFC control
IF amplifier with AGC control and FM
detector, built around another advanced
monolithic IC
Audio amplifier with tone and volume
controls
The kit requires an external +15V stabilized
power supply.
Ordering code:
B2300-K1
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200
FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it
Rev 00
Specifications may change without notice
Page 2 of 11
File LEAFLET B2300
B2300-K2 – AM RECEIVER KIT
General:
This is a high performance AM Radio
Receiver of a classic design in kit form. It is
built around discrete components in the RF
and IF stages. The kit also has an integrated
circuit as an audio power amplifier.
The kit operates in the 550 - 1650kHz
band.
The kit contains all the electronic
components, circuit boards and hardware
necessary to complete the project.
Printed on the circuit board there is a clear
silk-screen diagram of the component
positions and shapes.
Test points are provided for the execution of
setup, regulation and examination of the
circuit operation.
The AM Receiver consists of the following
sections:
−
−
−
−
−
Antenna input with bandpass filter
RF local oscillator/mixer
3-stage IF amplifier section with AGC
control
Diode demodulator detector with AGC
generator
Integrated audio amplifier with tone and
volume controls
The kit requires an external +15V stabilized
power supply.
Ordering code:
B2300-K2
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200
FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it
Rev 00
Specifications may change without notice
Page 3 of 11
File LEAFLET B2300
B2300-K3 – 2-WATT AUDIO AMPLIFIER KIT
General:
This is a 2 Watt Audio (AF) Amplifier in kit
form. It is of the latest design and includes
both discrete and integrated circuitry.
The kit contains all the electronic
components, circuit boards and hardware
necessary to complete the project.
Printed on the circuit board there is a clear
silk-screen diagram of the component
positions and shapes.
The AF amplifier consists of the following
sections:
−
−
−
Transistor input buffer amplifier
Separate treble and bass tone controls
Monolithic audio power amplifier
The kit requires an external +15V
stabilized power supply.
Ordering code:
B2300-K3
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200
FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it
Rev 00
Specifications may change without notice
Page 4 of 11
File LEAFLET B2300
B2300-K4 – FM MICRORECEIVER KIT
General:
This is a FM Microreceiver in kit form. The
receiver is of the latest design and includes
integrated circuitry in all stages and
operating in the 88-108 MHz band.
The microreceiver kit contains all the
electronic components, circuit boards and
hardware necessary to complete the project.
Printed on the circuit board there is a clear
silk-screen diagram of the component
positions and shapes.
Test points are provided for the execution of
setup, regulation and examination of the
circuit operation.
The FM Microreceiver
following sections:
−
−
−
−
consists
of
the
RF amplifier/local oscillator/mixer, built
around an advanced feature IC
Varicap tuning and AFC control
IF amplifier with AGC control and FM
detector, built around another advanced
monolithic IC
Audio amplifier with tone and volume
controls
The MICRORECEIVER KIT requires an
external +15V stabilized power supply.
Ordering code:
B2300-K4
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200
FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it
Rev 00
Specifications may change without notice
Page 5 of 11
File LEAFLET B2300
B2300-K5 – 1.2-WATT AUDIO AMPLIFIER KIT
General:
This is a 1.2 Watt Audio (AF) Amplifier in kit
form. It is of the latest design and includes
both discrete and integrated circuitry.
The kit contains all the electronic
components, circuit boards and hardware
necessary to complete the project.
Printed on the circuit board there is a clear
silk-screen diagram of the component
positions and shapes.
The AF amplifier consists of the following
sections:
−
−
−
Transistor input buffer amplifier
Tone control stage
Monolithic audio power amplifier
The kit requires an external +15V
stabilized power supply.
Ordering code:
B2300-K5
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200
FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it
Rev 00
Specifications may change without notice
Page 6 of 11
File LEAFLET B2300
B2300-K6 – STAIRCASE GENERATOR KIT
General:
This is a staircase generator in kit form. The
circuit is of the latest design and includes
both discrete and integrated circuitry.
The kit contains all the electronic
components, circuit boards and hardware
necessary to complete the project.
Printed on the circuit board there is a clear
silk-screen diagram of the component
positions and shapes.
The staircase generator consists of the
following sections:
−
−
−
CMOS oscillator
UP – DOWN counter
Mixer/output stage
The kit requires an external +12V
stabilized power supply.
Ordering code:
B2300-K6
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200
FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it
Rev 00
Specifications may change without notice
Page 7 of 11
File LEAFLET B2300
B2300-K7 – TRANSISTOR TESTER KIT
General:
The tester consists of the following sections:
This is a tester for transistors and diodes in
kit form, it is of the latest design and
includes integrated circuitry.
−
−
−
The kit contains all the electronic
components, circuit boards and hardware
necessary to complete the project.
The kit has an on-board 9V battery power
supply.
Printed on the circuit board there is a clear
silk-screen diagram of the component
positions and shapes.
IC oscillator
IC inverter
LED indicators
Ordering code:
B2300-K7
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200
FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it
Rev 00
Specifications may change without notice
Page 8 of 11
File LEAFLET B2300
B2300-K8 – BLINKER KIT
General:
This is a car indicator blinker in kit form. The
circuit is of the latest design and includes
both discrete and integrated circuitry.
The kit contains all the electronic
components, circuit boards and hardware
necessary to complete the project.
Printed on the circuit board there is a clear
silk-screen diagram of the component
positions and shapes.
The blinker
sections:
−
−
−
consists
of
the
following
IC timer
Transistor switch
Relay output stage
The kit requires an external +12V
stabilized power supply.
Ordering code:
B2300-K8
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200
FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it
Rev 00
Specifications may change without notice
Page 9 of 11
File LEAFLET B2300
B2300-K9 – GUITAR PREAMPLIFIER KIT
General:
This is a Guitar Preamplifier in kit form. The
circuit is of the latest design and includes
integrated components in all sections.
The kit contains all the electronic
components, circuit boards and hardware
necessary to complete the project.
Printed on the circuit board there is a clear
silk-screen diagram of the component
positions and shapes.
The AF amplifier consists of the following
sections:
−
−
−
Two level input section
Input buffer amplifier
Three way tone control
The kit requires an external +12V
stabilized power supply.
Ordering code:
B2300-K9
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200
FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it
Rev 00
Specifications may change without notice
Page 10 of 11
File LEAFLET B2300
B2300-K10 – FM TRAMSMITTER 10.7MHz KIT
General:
This is a wireless headphone transmitter
circuit in kit form. The operation frequency is
10,7MHz. The circuit is of the latest design
and includes both discrete and integrated
circuitry.
The transmitter operates on Frequency
Modulation of a carrier at 10,7MHz. Since
this is also the Intermediate Frequency (IF) of
most common domestic FM receivers, no
specific receiver will be required to work with
the B4232-K10 transmitter, other than a
standard FM receiver.
The kit contains all the electronic
components, circuit boards and hardware
necessary to complete the project.
Printed on the circuit board there is a clear
silk-screen diagram of the component
positions and shapes.
The transmitter consists of the following
sections:
−
−
−
−
On-board regulated power supply
Input audio preamplifier
Voltage controlled oscillator (VCO)
Tuned power output stage
The kit operates from a 120-240V AC mains
supply (Please specify while ordering).
Ordering code:
B2300-K10
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200
FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it
Rev 00
Specifications may change without notice
Page 11 of 11
File LEAFLET B2300