ISA-PLAN® // Precision resistors
A-H
Features
– Up to 10 W permanent power
– Max. permanent current: 8 1 A
– Very high precision of tolerance and TCR
– 4 -terminal connection
– Low self-heating
– RoHS 2011/65/EU compliant
Applications
– Measurement equipment
– Reference resistors in laboratories
– Current sources
– Laboratory power supplies
Technical data
Resistance values *
mOhm
Ohm
Tolerance
Temperature coefficient (20-60 °C)
Applicable temperature range
Power rating
Thermal resistance to ambient (Rth)
Thermal resistance to aluminium substrat (Rthi)
Dielectric withstanding voltage
Inductance
%
ppm/K
°C
W
K/W
K/W
V AC/DC
nH
Stability (Nominal load) deviation after 2000h
TK = Terminal temperature
1 to 500
1 to 100
0.1 / 1
<30
-55 to +140
3 / 10 (on a heatsink)
<15
<3
500
<10
< 0.1 % (TK = 80 °C with heatsink),
< 0.2 % (TK = 95 °C with heatsink)
* See all standard values on page 4
Isotek Corporation - An Isabellenhütte Company // sales@isotekcorp.com // Issue 09-January-2014 // Current valid issue: see www.isotekcorp.com
1 / 4
ISA-PLAN® // Precision resistors
A-H
Mechanical dimensions [mm]
Version A-H1 with standard terminal F1-K2
Mechanical dimensions [mm]
Version A-H2 with standard terminal F1-K2
Isotek Corporation - An Isabellenhütte Company // sales@isotekcorp.com // Issue 09-January-2014 // Current valid issue: see www.isotekcorp.com
2 / 4
ISA-PLAN® // Precision resistors
A-H
Temperature dependence of the electrical resistance
of A-H resistors
Power derating curve
dR/R20 [%]
P/P Nom
1
1,25
0,8
0,6
1
0,4
0,2
0,75
0
-0,2
0,5
-0,4
-0,6
0,25
-0,8
-1
-40
-20
0
20
40
60
80
100
120
0
140
0
20
40
60
80
100
120
Limiting curve
Typical temperature dependence of a A-H resistor
140
160
180
Terminal temperature TK [°C]
Temperature [°C]
Stability < 0.1 % heatsink mounted
Stability < 0.2 % heatsink mounted
10000
100
1000
10
100
1
10
0,1
1
0,01
0,1
0,01
0,0001
Power [W]
Pulse energy [J]
Maximum pulse energy respectively pulse power for permanent operation
0,001
0,0001
0,001
0,01
0,1
1
10
100
Pulse width [s]
This curve is only valid for the resistance value R005. The progression of the curve in the lower range could be different for other resistance
values. Therefore a separate qualification should be made in thresholds.
Isotek Corporation - An Isabellenhütte Company // sales@isotekcorp.com // Issue 09-January-2014 // Current valid issue: see www.isotekcorp.com
3 / 4
ISA-PLAN® // Precision resistors
A-H
Available standard resistance values and tolerances*
Resistance values A-H1
R001
Tolerance
Resistance values A-H2
Tolerance
0.1
1.0


R001


R002



R005
0.1
R010

R005

R020

R010

R050

R020

R100

R050

R200

R100

R250

R200

R300

R500

R500

1R00

1R00

2R00

5R00

5R00

10R0

10R0

33R0

20R0

100R

100R

1.0

* Further values and tolerances on request
ü = available
Ordering code
A-H1 - R005 - F1-K2 - 1.0
Tolerance
Terminal
Resistance value [Ohm] / „R“ represents decimal point
Type
Packaging Information
Parts per tray A-H1
Parts per tray A-H2
Tray
40
50
Disclaimer // All products, product specifications and data are subject to change without notice.
The product specifications do not expand or otherwise modify Isabellenhütte’s terms and conditions of sale, including but not limited to, the warranty expressed therein. Isabellenhütte makes no warranty, representation or guarantee other than as set forth in its terms and conditions of sale.
Information provided in datasheets and/or specifications may vary from actual results in different applications. Any statements made by Isabellenhütte regarding the suitability of products for certain types of applications are based on its knowledge of typical requirements that are often
placed on its products. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in the application intended.
No license, express or implied, or otherwise, to any intellectual property rights is granted by this document.
Any and all liability arising out of the application or use of any product shall be as set forth in Isabellenhütte’s terms and conditions of sale.
Isotek Corporation - An Isabellenhütte Company // sales@isotekcorp.com // Issue 09-January-2014 // Current valid issue: see www.isotekcorp.com
4 / 4