FLANGED AND MECHANICAL JOINT WALL PIPE (Fabricated)* (AWWA C111) Flange and Plain End Flange and MJ MJ and MJ Pressure Rating psi Pipe Size Inches 3 4 6 8 10 12 14 16 18 20 24 30 36 Flange and Flange Plain End and MJ Minimum Overall Length* Inches Ductile Flange / Plain MJ / MJ Flange / Flange Plain End / MJ Flange / MJ 250 350 250 350 250 350 250 350 250 350 250 350 250 350 250 350 250 350 250 350 250 350 250 250 250 250 Flange and Flange Flange and MJ MJ and MJ 7 7 7 8 8 8 10 10 11 11 11 10 10 8 9 9 9 9 9 11 11 12 12 12 12 12 10 10 10 10 10 10 12 12 12 12 12 16 21 Wall Body Collar Thickness O.D. Inches Inches .48 .52 .55 .60 .68 .75 .66 .70 .75 .80 .89 1.03 1.15 6.48 7.38 9.46 11.98 14.05 16.20 18.35 20.95 23.05 25.65 29.95 36.90 43.25 *Wall pipe can be furnished in varied lengths. Check for minimum and maximum available length. Note: Order must specify if plain end is to socket in a Mechanical Joint or Push-on bell. Flange Dimensions †† Pipe Studs Size Flange Inches O.D. No. Size Req’d. 3 7.50 5/8 x 2 1/4 4 4 9.00 5/8 X 2 1/2 8 6 11.00 3/4 x 3 8 8 13.50 3/4 x 3 8 10 16.00 7/8 x 3 l/4 12 12 19.00 7/8 x 3 1/4 12 14 21.00 1 x 3 3/4 12 16 23.50 1 x 3 3/4 16 18 25.00 1 1/8 x4 1/4 16 20 27.50 1 1/8 x4 1/4 20 24 32.00 1 1/4 x 4 1/2 20 30 38.75 1 1/4 x 5 28 36 46.00 1 1/2 x 9 32 MJ Dimensions † Bell O.D. 7.69 9.12 11.12 13.37 15.69 17.94 20.31 22.56 24.83 27.08 31.58 39.12 46.00 Studs Size 5/8 x 3 3/4 x 3 1/2 3/4 x 3 1/2 3/4 x 3 1/2 3/4 x 3 1/2 3/4 x 3 1/2 3/4 x 4 3/4 x 4 3/4 x 4 3/4 x 4 3/4 x 5 1x6 1x6 Approximate Weight Pounds No. Barrel One One Wall Req’d. per Inch Flange MJ Bell Collar 4 4 6 6 8 8 10 12 12 14 16 20 24 1.37 1.90 2.94 4.27 5.96 7.81 7.89 9.55 11.48 13.60 18.11 26.11 34.19 6 10 13 21 28 43 54 67 70 89 123 184 275 11 16 23 31 41 51 79 97 117 140 185 315 580 4 5 6 9 10 12 26 30 33 35 45 50 78 NOTE: Wall Pipe may be statically cast, with integral water-stop collars, or fabricated, with welded water-stop collars at our option unless otherwise specified. The above data are for statically cast wall pipe. † MJ Bells are furnished complete with standard joint accessories. Order must specify if bells are to be tapped for studs. Bells not tapped for studs are furnished with T-Head Bolts and nuts to the number and size indicated. †† Order must specify if flanges are to be drilled or tapped for studs. Unless specified otherwise, flanges will be furnished to 125 pound template. Flanges or MJ Bells ordered tapped for studs may be tapped between existing standard bolt holes unless specified otherwise. 75 FLANGED AND MECHANICAL JOINT WALL PIPE (Cast)* (AWWA C111) Flange and Plain End Flange and MJ MJ and MJ Pressure Rating psi Pipe Size Inches 3 4 6 8 10 12 14 16 18 20 24 30 36 Flange and Flange Plain End and MJ Minimum Overall Length* Inches Ductile Flange / Plain MJ / MJ Flange / Flange Plain End / MJ Flange / MJ 250 350 250 350 250 350 250 350 250 350 250 350 250 350 250 350 250 350 250 350 250 350 250 250 250 250 Flange and Flange Flange and MJ MJ and MJ 7 7 7 8 8 8 10 10 11 11 11 10 10 8 9 9 9 9 9 11 11 12 12 12 12 12 10 10 10 10 10 10 12 12 12 12 12 16 21 Wall Body Collar Thickness O.D. Inches Inches .48 .52 .55 .60 .68 .75 .66 .70 .75 .80 .89 1.03 1.15 7.00 8.00 10.00 12.50 14.50 16.50 19.50 21.75 23.75 25.75 30.25 36.25 43.4 *Wall pipe can be furnished in varied lengths. Check for minimum and maximum available length. Note: Order must specify if plain end is to socket in a Mechanical Joint or Push-on bell. Flange Dimensions †† Pipe Studs Size Flange Inches O.D. No. Size Req’d. 3 7.50 5/8 x 2 1/4 4 4 9.00 5/8 X 2 1/2 8 6 11.00 3/4 x 3 8 8 13.50 3/4 x 3 8 10 16.00 7/8 x 3 l/4 12 12 19.00 7/8 x 3 1/4 12 14 21.00 1 x 3 3/4 12 16 23.50 1 x 3 3/4 16 18 25.00 1 1/8 x4 1/4 16 20 27.50 1 1/8 x4 1/4 20 24 32.00 1 1/4 x 4 1/2 20 30 38.75 1 1/4 x 5 28 36 46.00 1 1/2 x 9 32 MJ Dimensions † Bell O.D. 7.69 9.12 11.12 13.37 15.69 17.94 20.31 22.56 24.83 27.08 31.58 39.12 46.00 Studs Size 5/8 x 3 3/4 x 3 1/2 3/4 x 3 1/2 3/4 x 3 1/2 3/4 x 3 1/2 3/4 x 3 1/2 3/4 x 4 3/4 x 4 3/4 x 4 3/4 x 4 3/4 x 5 1x6 1x6 Approximate Weight Pounds No. Barrel One One Wall Req’d. per Inch Flange MJ Bell Collar 4 4 6 6 8 8 10 12 12 14 16 20 24 1.37 1.90 2.94 4.27 5.96 7.81 7.89 9.55 11.48 13.60 18.11 26.11 34.19 6 10 13 21 28 43 54 67 70 89 123 184 275 11 16 23 31 41 51 79 97 117 140 185 315 580 4 5 6 9 10 12 26 30 33 35 45 50 78 NOTE: Wall Pipe may be statically cast, with integral water-stop collars, or fabricated, with welded water-stop collars at our option unless otherwise specified. The above data are for statically cast wall pipe. † MJ Bells are furnished complete with standard joint accessories. Order must specify if bells are to be tapped for studs. Bells not tapped for studs are furnished with T-Head Bolts and nuts to the number and size indicated. †† Order must specify if flanges are to be drilled or tapped for studs. Unless specified otherwise, flanges will be furnished to 125 pound template. Flanges or MJ Bells ordered tapped for studs may be tapped between existing standard bolt holes unless specified otherwise. 74 FLANGED AND MECHANICAL JOINT WALL PIPE (cont.) WALLPIPE MINIMUM DIMENSIONS (FABRICATED) Pipe Size Inches MJ x MJ MJ x FLG MJ x PE FLG x FLG 3 4 6 8 10 12 14 16 18 20 24 26 36 10” 10” 10” 10” 1’-0” 1’-0” 1’-3” 1’-3” 1’-4” 1’-4” 1’-4” 1’-8” 1’-9” 8” 8” 8” 8” 10” 10” 10” 10” 1’-0” 1’-0” 1’-0” 1’-4” 1’-5” 8” 8” 8” 8” 8” 8” 8” 8” 8” 8” 8” 1’-3” 1’-4” 5” 5” 6” 6” 7” 7” 7” 7 1/2” 8” 8” 9” 11” 1’-0” Note: 30” collars 9 1/2” and 36” collars 10” from bell FABRICATED PIPE MINIMUM DIMENSIONS Pipe Size Inches FLG x FLG 3 4 6 8 10 12 14 16 18 20 24 30 36 4” 4” 4 1/2” 5” 5 1/2” 6” 6” 6 1/2” 7” 7 1/2” 8 1/2” 9 1/2” 11” FLG x PE 3” 3” 3” 3” 4” 4” 4” 4” 4” 4” 4 1/2” 5” 5 1/2” PE x PE 1” 1” 1” 1” 1” 1” 1” 1” 1” 1” 1” 1” 1” MECHANICAL JOINT WALL SLEEVES Mechanical Joint Wall Sleeve Short pattern and Long pattern DIMENSIONS AND WEIGHTS Dimensions Inches Approximate Weight Pounds Overall Length* A B E Ductile Short Long Short Long 3 350 7.69 4.06 8.0 7.5 12 30 35 4 350 9.38 4.90 9.0 7.5 12 40 50 6 350 11.31 7.00 11.5 7.5 12 55 75 8 350 13.63 9.15 13.5 7.5 12 75 95 10 350 15.81 11.20 16.0 7.5 12 95 125 12 350 18.06 13.30 18.0 7.5 12 125 160 14 350 20.69 15.44 21.5 9.5 15 195 255 16 350 22.94 17.54 23.5 9.5 15 230 305 18 350 24.83 19.64 26.0 9.5 15 275 365 20 350 27.08 21.74 28.0 9.5 15 315 420 24 350 31.58 25.94 32.5 9.5 15 405 550 30 250 39.12 32.17 39.5 15.0 24 800 1140 *Available only in lengths shown for 3” thru 24” sizes. 30” size available in 1 inch increments from 12” to 24” overall length. Tapped for studs unless otherwise ordered. Bell flanges are tapped through unless otherwise specified. Pipe Size Inches Pressure Rating psi MECHANICAL JOINT WALL SLEEVE The sleeve can be furnished in lengths from 6” through 18” in increments of 2”. The sleeve is grooved at 2” intervals to facilitate cutting in the field, but is shipped full length unless otherwise specified. Studs, MJ gaskets and MJ glands are furnished with these sleeves unless otherwise specified. Bell flanges are tapped through unless otherwise specified. MJ WALL SLEEVE DIMENSIONS AND WEIGHT Pipe Size Inches 6 8 10 12 16 18 20 24 30 Bell O.D. 11.12 13.37 15.69 17.94 22.94 24.83 27.08 31.58 39.12 Dimensions in Inches Collar Inside O.D. Diameter 10.0 12.5 14.5 16.5 23.5 26.0 28.0 32.5 39.5 7.00 9.15 11.20 13.30 17.54 19.64 21.74 25.94 32.17 Weight Pounds 18 Inch Per 2 Inch Length Increments 85 115 160 190 310 370 430 580 830 7.1 9.9 13.6 17.6 27.2 32.7 38.7 51.8 75.9 75