Falk Ultramite UC Helical Concentric Gear Drives

Gear Catalog
Download the most up-to-date
versions at www.rexnord.com
Falk Ultramite UC
Helical Concentric Gear Drives
(Inch)
Falk Ultramite UC
Helical Concentric Gear Drive
To learn more about the Falk® Ultramite® UC Helical Concentric Gear Drive
and the rest of the Falk Ultramite family of products,
go to www.rexnord.com, where you’ll find:
Product information • Brochures • Catalogs • Manuals
866-REXNORD/866-739-6673 (toll-free within the U.S.) or 414-643-2366 (Outside the U.S.)
Selection Guide 281-110, May 2013
Table of Contents
Basic Information & Conditions Affecting Selection. . . . . . . . . . . . 3 & 4
How to Select & Order. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 & 6
Drive Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Service Factors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 & 9
Exact Ratios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 & 11
Drive & Motor Mounting Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Output Shaft Options (Dimensions) . . . . . . . . . . . . . . . . . . . . . . . . . 13
Motor Adapter Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 & 15
Motor Detail (NEMA C-Face) Dimensions . . . . . . . . . . . . . . . . . . . . . 16
Low Ratio Double Reduction - Sizes 03, 04, 06, 07 & 08
Gearmotor Selection Tables, LSS OHL & Part Numbers . . . . . . 17 - 23
UC Low Ratio Overhung Loads . . . . . . . . . . . . . . . . . . . . . . . . . 26 & 27
Thrust Loads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Moments of Inertia (WR2 ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Gear Drive Horsepower & Torque Tables . . . . . . . . . . . . . . . . . 29 & 30
Gear Drive Thermal Horsepower Ratings . . . . . . . . . . . . . . . . . . . . . 31
Gear Drive Part Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Approximate Shipping Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Low Ratio Dimensions
Gearmotor Base & Flange Mounted . . . . . . . . . . . . . . . . . . . . . 24 & 25
Gear Drive Base & Flange Mounted . . . . . . . . . . . . . . . . . . . . . 32 & 33
Sizes 201 thru 10
Gearmotor Selection Tables, LSS OHL & Part Numbers . . . . . . 36 - 61
Gear Drive Overhung Loads . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 & 71
Thrust Loads & WR2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Gear Drive Horsepower & Torque Tables . . . . . . . . . . . . . . . . . 73 - 80
Gear Drive Thermal Horsepower Ratings . . . . . . . . . . . . . . . . . . . . . 81
Gear Drive Part Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 - 87
Approximate Shipping Weights . . . . . . . . . . . . . . . . . . . . . . . . . 98 & 99
Dimensions
Gearmotor Base & Flange Mounted . . . . . . . . . . . . . . . . . . . . . 62 - 69
Gear Drive Base & Flange Mounted . . . . . . . . . . . . . . . . . . . . . 88 - 95
Accessories
UCF Optional Flanges Selections &
UC Fan Cooled Gear Drives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Backstop Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Basic Information
Safety Notes
Falk Gear Drives — The Falk and Rexnord name on the gear drive is the
purchaser’s assurance that the drive was engineered, rated and manufactured
to sound design practices. When one prime mover drives two pieces of
equipment, one of which is either a standard Rexnord geared drive or a
customer standard geared drive, the division of power between each machine is
the responsibility of the customer. The power supplied to the geared drive must
be equal to or less than the power for which the drive was selected using the
appropriate service factor for the application. The customer must also assume
the responsibility of isolating the gear drive from any vibratory or transient load
induced by the driven equipment.
Install and operate Rexnord products in conformance with applicable local and
national safety codes and per Rexnord installation manuals which are shipped
with gear drives and are also available on our website at www.rexnord.com.
Suitable guards for rotating members may be purchased from Rexnord as
optional accessories. Consult your local Rexnord Representative for complete
details.
People Conveying Equipment — Selection of Rexnord gear drives for
applications whose primary purpose is the transportation of people is not
approved. This includes such applications as freight or passenger elevators,
escalators, man lifts, work lift platforms and ski tows and ski lifts.
If the primary purpose of the application is material conveyance and
occasionally people are transported, the Rexnord warranty may remain in effect
provided the design load conditions are not exceeded and certification to the
appropriate safety codes and load conditions has been obtained by the system
designer or end user from the appropriate enforcement authorities.
Gear Drive Ratings — All gear drive ratings in this bulletin allow 100% overload
for starting loads and momentary overloads for electric motor driven applications
operating 10 hours per day under uniform conditions. For other conditions,
compute an equivalent horsepower by multiplying the actual horsepower required
for the application by the appropriate Service Factor.
Gear Drive Identification — Tables in this selection guide identify gear drives
based on the drive nomenclature.
Horsepower & Torque/Gearmotor Drives — Gearmotor Drive mechanical
horsepower and delivered torque ratings are tabulated only at 1750 rpm.
Horsepower, output torque, and LSS OHL ratings for Gearmotor Drives do not
always correspond to those of the comparable Inline Gear Drive of the same
size, reduction, and ratio.
In selected cases the Gearmotor Drive will have more rating than the
corresponding Inline Gear Drive. When additional rating for Gearmotor Drives at
1750 rpm input is available, it will be as stated in the Gearmotor Drive Selection
Tables. For Gearmotor Drive ratings at input speeds other than 1750 rpm,
consult the Factory.
Horsepower & Torque/Gear Drives — Gear Drive mechanical horsepower and
output torque ratings are tabulated in the Selection Guide to permit selections for
specific application requirements. When the required input speed falls between two
tabulated input speeds of a specific drive designation (size, reduction and ratio),
interpolate to determine drive rating.
Lubricants — Drive Sizes 201 thru 207UC will be supplied filled with a quantity
of EP mineral oil suitable for the drive mounting position specified at the time
of the order.
Drive Sizes 208 thru 10UC are supplied without lubricant. The appropriate fill
quantities and lubricant recommendations are stated in Manual 288-100.
Stored & Inactive Gear Drives — Each gear drive is protected with rust
preventive that will protect parts against rust for a period of 6 months in an
indoor dry shelter.
Sizes 208 thru 10UC — If a gear drive is to be stored, or is inactive after
installation beyond the above periods, drain oil from housing and spray all
internal parts with a rust preventive oil that is soluble in lubricating oil or add
“Motorstor”™ vapor phase rust inhibitor at the rate of one ounce per cubic foot
of internal drive space (or 5% of sump capacity) and rotate the shafts several
times by hand. Before operating, drives which have been stored or inactive must
be filled to the proper level with oil meeting the specifications given in Manual
288-100. Refer to Manual 128-014 for “Start-up after Storage” instructions.
Periodically inspect stored or inactive gear drives and spray or add rust
inhibitor every six months, or more often if necessary. Indoor dry storage is
recommended.
Gear drives ordered for extended storage can be treated at the Factory with
a special preservative and sealed to rust-proof parts for periods longer than
those cited previously.
Factory Warranty — Factory products generally carry a limited, one-year
warranty against defects in materials or workmanship; but for an actual
statement of the Factory Warranty, ask your local Representative or Distributor
for our Standard Conditions of Sale.
See warranty statement 100-003 on our website www.rexnord.com.
Copyright Rexnord, 1998, 2013
All Rights Reserved. Litho in U.S.A. RENEW, REXNORD, and ULTRAMITE, are registered trademarks.
Falk is a trademark of Rexnord.
The contents of this selection guide are subject to change without notice or obligation. Information
contained herein should be confirmed before placing orders.
©Rexnord, 1998, 2013
(281-110) 3
Conditions Affecting Selection
Non–Standard Application Procedures
The following conditions may affect the gear drive selection procedure, drive
size and auxiliary equipment being furnished.
Excessive Overloads — The maximum momentary or starting load must not
exceed 200% of rated load (100% overload). Rated load is defined as gear drive
rating with a Service Factor of 1.0. If the maximum starting or momentary load
exceeds the above conditions, compute a second equivalent horsepower by
dividing the peak load by two. The gear drive selected must have capacity equal
to, or in excess of, the larger equivalent horsepower.
Reversing Service — Applications involving either more than 20 reversals per
10 hour period, or less than 20 reversals per 10 hour period with peak torques
greater than 200% of normal load must be referred to the Factory.
Stop and Start Service — Applications involving frequent stop and start
overloads in access of 10 times per day must be referred to the Rexnord
Factory.
Brake Equipped Applications — When a gear drive is equipped with a
“working” brake that is used to decelerate the motion of the system and the
brake is located between the prime mover and the gear drive or on the rear of
the motor, select the drive based on the brake rating or the highest equivalent
horsepower, whichever is greater. If the brake is used for holding only and is
applied after the motion of the system has come to rest, the brake rating must
be less than 200% of the catalog rating, refer the application to the Factory.
Also refer to the Factory all applications in which the brake is located on the
output shaft of the gear drive.
Oversize Prime Mover — Published Service Factors do not cover applications
that require oversize prime movers for high energy or peak loads. Refer such
applications to the Factory for selection of suitable drives.
Speed Variation — Gear drives offered in this Selection Guide are designed
to operate with splash lubrication at all speeds for which they are catalogued,
provided the appropriate amount of lubricant is present based on the drive
mounting position (Refer to Manual 288-100 for oil quantity associated with
each gear drive mounting position). Variation of speed between cataloged
speeds, or at speeds falling between catalogued speeds, is permissible.
Lubrication of Sizes 201 thru 207UC — These sizes are furnished filled with
a quantity of oil. Quantity of oil furnished is based on the customer identified
drive mounting position stated at the time of order. Standard drive mounting
positions are shown in this selection guide. These sizes have no oil fill plug,
oil drain plug, or vent plug. Standard oil furnished with the gear drive is a
petroleum based extreme pressure lubricant conforming to AGMA Viscosity
Grade 6EP, ISO Viscosity Grade 320, and no further lubrication of the gear drive
is required.
Lubrication of Sizes 208 thru 10UC — These sizes are furnished without oil.
Customer oil fill is required. They are furnished with
oil fill plug, oil drain plug, and vent plug. Lubricant quantity lubricant
specifications, location of plugs, and recommended oil change frequency are
stated in the Installation & Maintenance Guide 288-100.
Variable or Multi–Speed Applications – All Types — When selecting gear
drives for multi-speed or variable speed application, determine the speed which
develops the greatest torque and select the drive on this basis. If the speed is
not listed in the selection table, use the next lower speed.
Effects of Solar Energy — If a drive operates in the sun at ambient
temperatures over 100°F, then special measures must be taken to protect the
drive from solar energy. This protection can consist of a canopy over the drive
or reflective paint on the drive. If neither is possible, a heat exchanger or other
cooling device maybe required.
Overhung Loads and Thrust Loads — The overhung load and thrust load
ratings published in this bulletin are based on a combination of the most
unfavorable conditions of rotation, speed, direction of applied load and drive
loading. If the calculated load exceeds the published value, or if an overhung
load and thrust load are applied simultaneously to a shaft, refer complete
application information to the Rexnord Rexnord factory.
Non-Standard Mounting Positions — For non-standard mounting positions
(other than those shown in this Selection Guide) refer to the Rexnord factory
for lubricant level and quantity.
Double Seal Option — Certain applications may dictate the use of double
seals. This option, provided at an additional charge, is furnished as follows:
Gearmotors — A double seal is available only at the low speed shaft.
Inline Drives — A double seal is furnished at both the high speed and low
speed shafts.
Reference Notes
General Information
– Rexnord standards apply unless otherwise specified.
– All dimensions are for reference only and are subject to change without
notice unless certified.
– H.S. Shaft or HSS = High Speed Shaft.
– L.S. Shaft or LSS = Low Speed Shaft.
4 (281-110)
 Dimensions are for reference only and will vary with motor manufacturer.
† For higher ratio selections, consult the Rexnord factory.
Check thermal input hp ratings. Selection tables are based on mechanical input hp ratings only.
‡ Thermal ratings are based upon the fitting of TEFC motor on gearmotors. For gear drives, consult the Rexnord factory.
©Rexnord, 1998, 2013
UC – How to Select & Order Gearmotors
Before making any selections, refer to the Basic Information and Conditions Affecting Selections on Pages 3 and 4.
Selection of Gearmotors
Example
1.
2.
3.
4.
Application: Belt conveyor, heavy duty, head shaft speed is 24 rpm, ambient
temperature of 86°F base mounted drive configuration is specified.
Duty Cycle: 16 hours per day.
Driver: 1/2 hp electric motor, 1750 rpm, 56C frame.
Output: 3” pitch diameter sprocket with a 2:1 chain drive. Sprocket is mounted
on gearmotor output shaft such that the centerline of the overhung load is at
the midpoint of the output shaft extension.
1. Service Factor from Page 9 is 1.50.
2. Motor Horsepower is .5 hp.
3. The head shaft speed must be multiplied by the chain drive ratio to obtain
the drive output rpm (24 x 2 = 48 rpm) and ratio (1750 ÷ 48 = 36:1).
4. From selection guide on Page 40, the appropriate gearmotor is the Size
202UCBN2A36.A_A, part number 4767286 (base mounted), exact ratio
35.69:1, 2.26 service factor, and permissible overhung load equals 899 lb.
5. Check Thermal Rating — From Page 81, the thermal hp rating is 7.8
hp. Since the ambient temperature is 86°F you must apply an ambient
adjustment factor to determine the application adjusted thermal rating.
Application adjusted thermal hp = 7.8 x .86 = 6.7hp
The application adjusted hp rating of the gearmotor exceeds our motor hp
requirements.
6. Overhung Load Check — Allowable overhung load from Page 40 is 899 lb.
Calculate overhung load per instructions on Page 70.
OHL = 126000 x .5 hp x 1.00 x 1.00 = 438 lb
3 x 48
The overhung load capacity of the gearmotor exceeds our calculated
requirements.
7. Check External Thrust Load Capacity on Page 72 — For this example there
is no external thrust.
8. Check Dimensions on Page 62.
9. Specify Drive Mounting Position and Motor Mounting Position (If Mounted
Motor is Requested) from Page 12 — For our example, the gearmotor is
mounted in drive mounting position #1, flat on the floor.
Regarding mounting of NEMA C – Face motors, the most common motor
mounting position is “C”, with the nameplate upward and the conduit box
wiring hole down.
5.
6.
7.
8.
9.
Determine Service Factor — See Pages 8 & 9.
Determine Motor Horsepower.
Determine Gearmotor Output Speed and Ratio.
Gearmotor Selection tables are included on Pages 17 through 23 and
36 through 61. These tables assume a motor base speed of 1750 rpm.
For ratings at other motor base speeds, consult your authorized Sales
Representative.
Go to the page that contains selections based on the specific C – Face
motor you will be using. For example, selections for .50 hp, 1750 rpm, 56C
frame motors are tabulated on Pages 40 & 41.
Starting at the top of the first selection page pertinent to your motor
requirement, move down the selections until a gearmotor meeting your
output speed, ratio, reduction, and service factor requirements is located.
For example consider an application with a .50 hp, 1750 rpm/56C frame
motor, output speed of 47 rpm, nominal ratio of 36:1, and a required
service factor of 2.00.
Pages 40 & 41 contains selections for a .50 hp, 1750 rpm/56C frame motor.
The Gearmotor 202UCBN2A36.A_A (base mounted) has an output speed
of 48 rpm, exact ratio of 35.69:1, double reduction, and a service factor of
2.26 which meets our requirements. Choose your required configuration,
a base mounted or flange mounted gearmotor and record the full
nomenclature & part number.
Check thermal Rating — The application adjusted thermal rating must be
equal or exceed the actual power transmitted(.50 hp). Ratings are based
upon an ambient temperature of 68°F. If the actual ambient is different
an ambient adjustment factor must be applied. Basic thermal ratings and
ambient adjustment factors are included on page 81.
Check Overhung Load — The gearmotor selection tables provide the low
speed shaft overhung capacity of the gearmotor selected. If overhung load
is present, calculate the value of the overhung load per instructions on
Page 70. Sprockets or other devices mounted on the output shaft of the
gearmotor should be sized and positioned so the gearmotor overhung load
capacities are not exceeded. Should applied overhung loads exceed the
capacity of the initial gearmotor selected, a larger gearmotor of adequate
capacity must be selected.
Check External Thrust Load — Permissible thrust loads are provided
on Page 72. If thrust and overhung loads are applied simultaneously, or
if loads exceed stated thrust capacities, consult your authorized Sales
Representative.
Check Gearmotor Dimensions — Pages 62 through 69.
When ordering, provide the gear drive mounting position from Page 12. If
a mounted motor is ordered, specify motor mounting position, also from
Page 12.
BASE MOUNTED GEARMOTOR
©Rexnord, 1998, 2013
FLANGE MOUNTED GEARMOTOR
(281-110) 5
UC – How to Select & Order Gear Drives
Before making any selections, refer to the Basic Information and Conditions Affecting Selections on Pages 3 and 4.
Selection of Gear Drives
Example
1. Determine Service Factor — See Pages 8 & 9.
2. Determine Equivalent Horsepower — Calculate the equivalent hpby
multiplying the motor hp by the service factor.
3. Determine Gear Drive Output Speed and Ratio.
4. Gear Drive Selection tables are included on Pages 73 through 80. Go to the
page that contains selections based on your required input speed for the
gear drive. For example, selections based an input speed of 1750 rpm are
shown on Pages 75 and 76.
Locate the table containing your required ratio, reduction and low speed
shaft rpm & select the drive size with a mechanical rating equal to or
exceeding your equivalent horsepower requirement.
Having selected a gear drive size meeting your ratio, reduction and
equivalent horsepower requirements, obtain nomenclature, exact ratio and
Falk part number from Pages 82 through 87. Part number selected will
depend on your mounting configuration (base mount or flange mount).
5. Check thermal rating. — The application adjusted thermal rating must be
equal or exceed the actual power transmitted. Ratings are based upon an
ambient temperature of 68°F. If the actual ambient is different , an ambient
adjustment factor must be applied. Basic thermal ratings and ambient
adjustment factors are included on Page 81.
6. Check Overhung Load — Tables on Page 71 provide the overhung load
capacity of the gear drive selected. If overhung load is present calculate the
value of the overhung load per instructions on Page 70.
Sprockets or other devices mounted on the output shaft of the gear drive
should be sized and positioned so the gear drive overhung load capacities
are not exceeded. If applied overhung loads exceed the capacity of the
initial gearmotor selected, a larger gear drive of adequate capacity must be
selected.
7. Check External Thrust Load — Permissible thrust loads are provided
on Page 72. If thrust and overhung loads are applied simultaneously, or
if loads exceed stated thrust capacities, consult your authorized Sales
Representative.
8. Check Gear Drive Dimensions — Pages 88 through 95.
9. When ordering, provide the drive mounting position from Page 12.
Application: Belt conveyor, heavy duty, head shaft speed is 24 rpm, ambient
temperature of 86°F, base mounted drive configuration is specified.
Duty Cycle: 16 hours per day.
Driver: 1/2 hp electric motor, 1750 rpm.
Output: 3” pitch diameter sprocket with a 2:1 chain drive. Sprocket is mounted
on drive output shaft such that the centerline of the overhung load is at the
midpoint of the output shaft extension.
1. Service Factor from Page 9 is 1.50.
2. Equivalent Horsepower is .5 x 1.5 = .75 hp.
3. The head shaft speed must be multiplied by the chain drive ratio to obtain
the drive output rpm (24 x 2 = 48 rpm) and ratio (1750 ÷ 48 = 36:1).
4. From selection guide on Page 75, the appropriate gear drive exceeding your
equivalent hp of .75 is the Size 202 with a service factor of 2.3.
Complete designation of the gear drive is obtained from Page 82
(202UCBN2A36.N_, exact ratio 35.69 and part number 4767288).
5. Check Thermal Rating — From Page 81, the thermal hp rating is 7.8hp.
Since the ambient temperature is 86°F you must apply an ambient
adjustment factor to determine the application adjusted thermal rating.
Application adjusted thermal hp = 7.8 x .86 = 6.7hp
The application adjusted hp rating of the gear drive exceeds our motor hp
requirements.
6. Overhung Load Check — Allowable overhung load from Page 71 is 861 lb.
Calculate overhung load per instructions on Page 70.
OHL = 126000 x .5 hp x 1.00 x 1.00 = 438 lb
3 x 48
The overhung load capacity of the gear drive exceeds our calculated
requirements.
7. Check External Thrust Load Capacity on Page 72 — For this example there
is no external thrust.
8. Check Dimensions on Page 88.
9. Specify Drive Mounting Position and Motor Mounting Position (If Mounted
Motor is Requested) from Page 12 — For our example, the gearmotor is
mounted in drive mounting position #1, flat on the floor.
Base Mounted Gear Drive
6 (281-110)
Flange Mounted Gear Drive
©Rexnord, 1998, 2013
UC – Drive Nomenclature
203
UC B N 2 A -
3.6 A 1 A .75 4 A
Drive Size
Product Type
Configuration
Output Shaft
Reductions
Model
Variance Symbol
Low Ratio Drive Sizes
03, 04, 06, 07 & 08
Drive Sizes
201, 202, 203, 204, 205, 206, 207, 208, 09 & 10
Product Type
Motor Mounting Position «
Motor Poles «
Motor Power«
Motor Adapter Symbol
Drive Mounting Position
Input Type
Ratio Code
Ratio Code, Three Characters, Refer to Pages 10 & 11
1.4 thru 4.5 Low Ratio Double Reduction – Sizes 03, 04, 06, 07 & 08
3.6 thru 56. Double Reduction – Sizes 201 - 208
1.4 thru 71. Double Reduction – Sizes 09 - 10
56 thru 250 Triple Reduction – Sizes 201 - 10
225 thru 27C Quadruple Reduction C=00 Sizes 203 - 10
27C thru 10K Quintuple Reduction K=000 Sizes 203 - 10
UC — Concentric Helical
Configuration
B — Base Mount
F — Flange Mount
Output Shaft
Input Type
A — Motor Adapter to Allow Fitting of Falk Std. NEMA Motor
G — Motor Adapter to Allow Fitting of Falk Std. IEC Motor
N — Inline Adapter (Inch)
C — Inline Adapter (Metric)
C — Metric
N —Inch
Drive Mounting Position, Refer to Page 12
Reductions
Motor Adapter Symbol, Refer to Page 14
2 — Double
3 — Triple
4 — Quadruple
5 — Quintuple
Model
A, B, C, etc.
Variance Symbol
Variance Symbol is omitted when Standard Mineral Lube and Single Seals are
specified
A — Standard Mineral Lube and Double Seals
B — Synthetic Lube and Single Seals
C — Biodegradeable lube and Single Seals
D — Food Compatible Lube and Single Seals
E — Synthetic Lube with Double Seals
F — Biodegradeable Compatible Lube with Double Seals
G — Food compatible Lube with Double Seals
H — Backstop (Hold Back)
J — Cooling Fan - Shaft Driven
S — Multiple Variances or Special
©Rexnord, 1998, 2013
Mounting Positions 1-6 for UCBN and 7-9 for UCFN
A through W
Motor Power, Decimal Point Shown«
Horsepower – NEMA Motor
Kilowatts – IEC Motor
Motor Poles «
2 — Poles, 3600 rpm @ 60 Hz, or 3000 rpm @ 50 Hz
4 — Poles, 1800 rpm @ 60 Hz, or 1500 rpm @ 50 Hz
6 — Poles, 1200 rpm @ 60 Hz, or 1000 rpm @ 50 Hz
8 — Poles, 900 rpm @ 60 Hz, or 750 rpm @ 50 Hz
Motor Mounting Position, Refer to Page 12 «
When Viewed from L.S. Shaft of Base Mounted Drive with Mounting Feet Down
A — Conduit Box Horizontal on Right Side, 0°
B — Conduit Box Vertical on Bottom Side, 90°
C — Conduit Box Horizontal on Left Side, 180°
D — Conduit Box Vertical on Top Side of Drive 270°
++ Motor Power, Motor Poles and Motor Mounting Position are stamped on the nameplate only if the
motor is furnished & fitted by the Factory.
(281-110) 7
Type UC Service Factors
A gear drive is rated to a specified application by the use of Service Factors.
Each application has its own conditions and operating requirements. These have
been analyzed and catalogued. Numerical values, based on field experience,
have been assigned to these classifications for intermittent service of 3 to 10
hours per day and for service over 10 hours per day and also for the type of
prime mover . . . electric motor or engine. Values for most applications are
listed by Application on Page 9,Table 3 and by Industry at right, Table 2.
Examples — A comparison of three different applications, each operating
16 hours per day, will illustrate the function of Service Factors: an Assembly
Conveyor, uniformly loaded (SF
Service
= 1.25), a Belt Conveyor, heavy
3
to
Over
duty (SF = 1.50) and a Laundry
Application
10
10
Washer (SF = 2.00). If each of
Hours Hours
these applications requires 10 hp,
each drive is selected for a rating
Assembly Conveyors
of 10 hp times the Service Factor
Uniformly
1.25
1.25
— that is, for 12.5, 15 and 20 hp
Loaded or Fed
respectively. Thus, the Service
Belt
Conveyors
Factor takes into consideration the
varying conditions of operation:
Heavy Duty
125
1.50
Laundry Washer service is
Laundry Washer
1.50
2.00
relatively more severe than that of a
uniformly loaded Assembly Conveyor, etc.
Since most industrial applications are electric motor driven, Service Factors are
based on the use of electric motors. These factors can be easily converted to
engine-drive factors as outlined in Table 1.
Service Factors are based on the assumption that the system is free of dynamic
vibrations, as explained in the warranty section, and that maximum momentary
or starting loads do not exceed 200%of the rated load.
Service Factors listed are recommended as minimum for general purpose use.
Application of these service factors will result in normal drive reliability and
life under typical operation conditions. Refer to the Factory any application not
listed in Tables 2 or 3.
Applications involving unusual operating conditions or requirements such as,
but not limited to, the following should also be referred to the Factory:
• Applications requiring extended life/High reliability exceeding normal
• High frequency starting
• Stalling or other high energy load absorption
• Torsional vibrations
• Frequent speed variations
• Reversing loads
• Extremes in ambient temperature
Occasional & Intermittent
Service or Engine Driven Applications
For multi-cylinder engine driven applications and all applications operating
intermittently up to 3 hours per day, refer to Table 2 or 3 for the Service Factor
of the same application operating 3 to 10hours per day. Next, in the first
column of Table 1, find this same Service Factor in bold face type. Then, to the
right, under the desired hours service and prime mover, locate the converted
Service Factor.
For example, from Table 3, the Service Factor is 1.25 for a uniformly loaded belt
conveyor. From Table 1, for the same application the following are the Service
Factors for various conditions.
1. Engine driven 3 to 10 hours per day; use 1.50 Service Factor.
2. Engine driven up to 3 hours intermittently; use 1.25 Service Factor.
3. Motor driven up to 3 hours intermittently; use 1.00 Service Factor.
Table 1 — Service Factor
Table 2 or 3
3 to 10 Hour
Service
Factor
1.00
1.25
1.50
1.75
2.00
3 to 10 Hours
per Day
Over 10 Hours
per Day
Intermittent - Up to
3 Hours per Day †
Multi-Cyl.
Engine ‡
Motor
Multi-Cyl.
Engine ‡
Motor
Multi-Cyl.
Engine ‡
1.25
1.50
1.75
2.00
2.25
1.25
1.50
1.75
2.00
2.25
1.50
1.75
2.00
2.25
2.50
1.00
1.00
1.25
1.50
1.75
1.00
1.25
1.50
1.75
2.00
†† For applications operating one half hour or less per day, and applications driven by single cylinder
engine, refer to Factory.
‡‡ These service factors are based on the assumption that the system is free from serious critical and
torsional vibrations, and that maximum momentary or starting loads do not exceed 200% of the
normal load.
Table 2 — Type UC Service Factors Listed by
For electric motor, steam turbine or hydraulic motor drives. . .
recommendations are MINIMUM and normal conditions are assumed.
Service
Service
Industry
3 to Over
10 10
Hour Hour
BOTTLING AND BREWING
Bottling Machinery . . . . . . . . . . . . . . . . 1.25
1.25
Brew Kettles, Continuous Duty . . . . . . . 1.25
1.25
Can Filling machines . . . . . . . . . . . . . . 1.25
1.25
Cookers—Continuous Duty . . . . . . . . . 1.25
1.25
Mash Tubs—Continuous Duty . . . . . . 1.25
1.25
Scale Hoppers—Frequent Starts . . . . . 1.25
1.50
CLAY WORKING INDUSTRY
Clay Working Machinery . . . . . . . . . . . 1.25
1.50
Pug Mills . . . . . . . . . . . . . . . . . . . . . . . 1.25
1.50
DISTILLING . . . . . . . . . . . . . . See Bottling
FOOD INDUSTRY
Beet Slicers . . . . . . . . . . . . . . . . . . . . . 1.25
1.50
Bottling, Can Filling Machine . . . . . . . . 1.25
1.25
Cereal Cookers . . . . . . . . . . . . . . . . . . . 1.25
1.25
Dough Mixers, Meat Grinders . . . . . . . 1.25
1.50
LUMBER INDUSTRY
Conveyors
Burner . . . . . . . . . . . . . . . . . . . . . . . . . 1.25
1.50
Main or Heavy Duty . . . . . . . . . . . . . . . 1.50
1.50
Re-Saw Merry-Go-Round . . . . . . . . . . 1.25
1.50
Slab . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.75
2.00
Transfer . . . . . . . . . . . . . . . . . . . . . . . . 1.25
1.50
Chains—Floor . . . . . . . . . . . . . . . . . . . 1.50
1.50
Chains—Green . . . . . . . . . . . . . . . . . . 1.50
1.75
Cut-Off Saws—Chain & Drag . . . . . . . 1.50
1.75
Feeds—Edger . . . . . . . . . . . . . . . . . . . 1.25
1.50
Feeds—Gang . . . . . . . . . . . . . . . . . . . . 1.75
1.75
Feeds—Trimmer . . . . . . . . . . . . . . . . . 1.25
1.50
Log Turning Devices . . . . . . . . . . . . . . 1.75
1.75
Planer Feed . . . . . . . . . . . . . . . . . . . . . 1.25
1.50
Planer Tilting Hoists . . . . . . . . . . . . . . 1.50
1.50
Rolls–Live–Off Bearing–
Roll Cases . . . . . . . . . . . . . . . . . . . . 1.75
1.75
Sorting Table, Tipple Hoist . . . . . . . . . . 1.25
1.50
Transfers—Chain & Craneway . . . . . . 1.75
2.00
Tray Drives . . . . . . . . . . . . . . . . . . . . . . 1.25
1.50
Veneer Lathe Drives . . . . . . . . . . . . . . . Refer to Factory
OIL INDUSTRY
Chillers . . . . . . . . . . . . . . . . . . . . . . . . 1.25
1.50
Paraffin Filter Press . . . . . . . . . . . . . . . 1.25
1.50
Rotary Kilns . . . . . . . . . . . . . . . . . . . . . 1.25
1.50
PAPER MILLS 
Agitator (Mixer) . . . . . . . . . . . . . . . . . .
...
1.50
Agitator for Pure Liquids . . . . . . . . . . .
...
1.50
Beater . . . . . . . . . . . . . . . . . . . . . . . . . .
...
1.50
Breaker Stack . . . . . . . . . . . . . . . . . . . .
...
1.50
tCalender . . . . . . . . . . . . . . . . . . . . .
...
1.50
Chipper . . . . . . . . . . . . . . . . . . . . . . . .
...
2.00
Chip Feeder . . . . . . . . . . . . . . . . . . . . .
...
1.50
Coating Rolls . . . . . . . . . . . . . . . . . . . .
...
1.50
Conveyors—
Chip, Bark, Chemical . . . . . . . . . . . . . .
...
1.50
Couch Rolls . . . . . . . . . . . . . . . . . . . . .
...
1.50
Cylinder molds . . . . . . . . . . . . . . . . . .
...
1.50
tDryers —
Paper Mach. & Conveyor Type . . . . . . .
...
1.50
Embosser . . . . . . . . . . . . . . . . . . . . . . .
...
1.50
Extruder . . . . . . . . . . . . . . . . . . . . . . . .
...
1.50
Fourdrinier Rolls—
Lumpbreaker, Wire Turning
Dandy & Return Rolls . . . . . . .
...
1.50
3 to Over
10 10
Hour Hour
Industry
Jordan . . . . . . . . . . . . . . . . . . . . . . . . Kiln Drive . . . . . . . . . . . . . . . . . . . . . . Mt. Hope & Paper Rolls . . . . . . . . . . . Platter . . . . . . . . . . . . . . . . . . . . . . . . .
Presses (Felt & Suction) . . . . . . . . . . Reel (Surface Type) . . . . . . . . . . . . . . Screens
Chip & Rotary . . . . . . . . . . . . . . . . . . Size Press . . . . . . . . . . . . . . . . . . . . . Thickener & Washer
AC Motor . . . . . . . . . . . . . . . . . . . . . . DC Motor . . . . . . . . . . . . . . . . . . . . . . Vacuum Pumps . . . . . . . . . . . . . . . . . Wind & Unwind Stand . . . . . . . . . . . . Winders (Surface Type) . . . . . . . . . . . PLASTIC INDUSTRY
Batch Drop Mill, 2 smooth rolls
Calenders . . . . . . . . . . . . . . . . . . . . . . Compounding Mills . . . . . . . . . . . . . . Continuous Feed, Holding &
Blend Mill . . . . . . . . . . . . . . . . . . .
Intensive Internal Mixers
Batch Mixers . . . . . . . . . . . . . . . . . . . Continuous Mixers . . . . . . . . . . . . . . .
RUBBER INDUSTRY
Batch Drop Mill, 2 smooth rolls
Calenders . . . . . . . . . . . . . . . . . . . . . . Cracker Warmer—2 roll.
1 corrugated roll . . . . . . . . . . . . . . . .
Holding, Feed & Blend Mill—
2 Roll . . . . . . . . . . . . . . . . . . . . . . .
Intensive Internal Mixers
Batch Mixers . . . . . . . . . . . . . . . . . . . Continuous Mixers . . . . . . . . . . . . . . .
Mixing Mill—2 smooth rolls
(if corrugated rolls are used. use
Cracker Warmer
service factors) . . . . . . . . . . . . . . . .
Refiner—2 roll . . . . . . . . . . . . . . . . . . SEWAGE DISPOSAL
Bar Screens . . . . . . . . . . . . . . . . . . . . Chemical Feeders . . . . . . . . . . . . . . . . Collectors . . . . . . . . . . . . . . . . . . . . . .
Dewatering Screens . . . . . . . . . . . . . . Scum Breakers . . . . . . . . . . . . . . . . . . Slow or Rapid Mixers . . . . . . . . . . . . . Thickeners . . . . . . . . . . . . . . . . . . . . . Vacuum Filters . . . . . . . . . . . . . . . . . . TEXTILE INDUSTRY
Batchers, Calenders . . . . . . . . . . . . . . Card Machines . . . . . . . . . . . . . . . . . . Dry Cans, Dryers . . . . . . . . . . . . . . . . Dyeing Machinery . . . . . . . . . . . . . . . Looms, Mangles,
Nappers, Pads . . . . . . . . . . . . . . . . Slashers, Soapers, Spinners,
Tenter Frames, Washers,
Winders . . . . . . . . . . . . . . . . . . . . . ...
...
...
...
...
...
1.50
1.50
1.50
1.50
1.50
1.50
...
...
1.50
1.50
...
...
...
...
...
1.50
1.50
1.50
1.25
1.25
1.25
1.50
1.25
1.25
1.50
1.25
1.25
1.25
1.75
1.50
1.75
1.50
1.50
1.50
1.50
1.50
1.75
1.75
1.25
1.25
2.00
1.50
2.00
1.50
1.50
1.50
1.50
1.50
1.25
1.25
1.25
1.50
1.50
1.50
1.50
1.50
1.25
1.25
1.25
1.50
1.50
1.50
1.50
1.50
1.25
1.25
1.25
1.25
1.50
1.50
1.50
1.50
1.25
1.50
1.25
1.50
++ Service Factors for paper mill applications are applied to the nameplate rating of the electric drive
motor at the motor rated base speed and are consistent with those shown in TAPPI standards.
 Anti-friction bearings only.
8 (281-110)
©Rexnord, 1998, 2013
TABLE 3 — Type UC Service Factors listed by
Application
Service
Application
3 to Over
10 10
Hour Hour
AGITATORS
Pure Liquids . . . . . . . . . . . . . . . . . . . . 1.25
1.25
Liquids & Solids . . . . . . . . . . . . . . . . . 1.25
1.50
Liquids-Variable Density . . . . . . . . . . . 1.25
1.50
APRON CONVEYORS . . . . . . . . Uniformly Loaded or Fed . . . . . . . . . . . 1.25
1.50
Heavy Duty . . . . . . . . . . . . . . . . . . . . . . 1.25
1.50
APRON FEEDERS . . . . . . . . . . . 1.25
1.50
ASSEMBLY CONVEYORS
Uniformly Loaded or Fed . . . . . . . . . . . 1.25
1.25
Heavy Duty . . . . . . . . . . . . . . . . . . . . . . 1.25
1.50
BALL MILLS . . . . . . . . . . . . . . See Mills. Rotary
BAR SCREENS (Sewage) . . . . . 1.25
1.25
BATCHERS (Textile) . . . . . . . . . 1.25
1.50
BELT CONVEYORS
Uniformly Loaded or Fed . . . . . . . . . . . 1.25
1.25
Heavy Duty . . . . . . . . . . . . . . . . . . . . . . 1.25
1.50
BELT FEEDERS . . . . . . . . . . . . 1.25
1.50
BENDING ROLLS (Machine) . . . 1.25
1.50
BLOWERS
Centrifugal . . . . . . . . . . . . . . . . . . . . . . 1.25
1.25
Lobe . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.25
1.50
Vane . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.25
1.50
BOTTLING MACHINERY . . . . . . 1.25
1.25
BREWING . . . . . . . . . . . . . . . . See Table 2
BUCKET
Conveyors Uniform . . . . . . . . . . . . . . . 1.25
1.50
Conveyors Heavy Duty . . . . . . . . . . . . . 1.25
1.50
Elevators Continuous . . . . . . . . . . . . . . 1.25
1.50
Elevators Uniform . . . . . . . . . . . . . . . . 1.25
1.50
Elevators Heavy Duty . . . . . . . . . . . . . . 1.25
1.50
CALENDERS
Rubber and Plastic . . . . . . . . . . . . . . . .
See Table 2
Textile . . . . . . . . . . . . . . . . . . . . . . . . . . 1.25
1.50
CAN FILLING MACHINES . . . . . 1.25
1.25
CARD MACHINES (Textile) . . . . 1.25
1.50
CAR PULLERS . . . . . . . . . . . . . 1.25
1.50
CEMENT KILNS . . . . . . . . . . . . See Mills. Rotary
CENTRIFUGAL
Blowers, Compressors,
Discharge Elevators,
Fans or Pumps . . . . . . . . . . . . . . . . . . 1.25
1.25
CHAIN CONVEYORS
Uniformly Loaded or Fed . . . . . . . . . . . 1.25
1.25
Heavy Duty . . . . . . . . . . . . . . . . . . . . . . 1.25
1.50
CHEMICAL FEEDERS (Sewage) . 1.25
1.25
CLARIFIERS . . . . . . . . . . . . . . 1.25
1.25
CLASSIFIERS . . . . . . . . . . . . . 1.25
1.50
CLAY WORKING . . . . . . . . . . . See Table 2
COLLECTORS (Sewage) . . . . . . 1.25
1.25
COMPRESSORS
Centrifugal . . . . . . . . . . . . . . . . . . . . . . 1.25
1.25
Lobe . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.25
1.50
Reciprocating
Multi-Cylinder . . . . . . . . . . . . . . . . . . . 1.50
1.75
Single-Cylinder . . . . . . . . . . . . . . . . . . 1.75
2.00
CONCRETE MIXERS
Continuous . . . . . . . . . . . . . . . . . . . . . 1.25
1.50
Intermittent . . . . . . . . . . . . . . . . . . . . . . 1.25
1.50
Service
Application
«CONVEYORS—Uniformly
loaded or Fed:
Apron, Assembly, Belt, Bucket,
Chain, Flight, Oven, Screw. . .
«CONVEYORS—Heavy Duty. Not
Uniformly Fed
Apron, Assembly, Belt, Bucket, Chain,
Flight, Oven, Screw . . . . . . . . . . . . . . .
COOKERS (Brewing & Distilling),
(food) . . . . . . . . . . . . . . . . . . DEWATERING SCREENS
(Sewage) . . . . . . . . . . . . . . . . DISC FEEDERS . . . . . . . . . . . . DISTILLING . . . . . . . . . . . . . . DOUBLE ACTING PUMPS
2 or more Cylinders . . . . . . . . . . . . . . .
DOUGH MIXER (Food) . . . . . . . DRAW BENCH (Metal Mills)
Carriage & Main Drive . . . . . . . . . . . . DRYERS & COOLERS (Mills.
Rotary) . . . . . . . . . . . . . . . . . DYEING MACHINERY (Textile) . . ELEVATORS
Bucket-Uniform Load . . . . . . . . . . . . . .
Bucket-Heavy Duty . . . . . . . . . . . . . . . .
Bucket-Continuous . . . . . . . . . . . . . . .
Centrifugal Discharge . . . . . . . . . . . . . .
«Escalators . . . . . . . . . . . . . . . . . . . .
«Freight . . . . . . . . . . . . . . . . . . . . . . .
Gravity Discharge . . . . . . . . . . . . . . . . .
«Man Lifts, Passenger . . . . . . . . . . . .
EXTRUDERS
(Plastic & Rubber) . . . . . . . . . . FANS
Centrifugal . . . . . . . . . . . . . . . . . . . . . .
Forced Draft . . . . . . . . . . . . . . . . . . . . .
Induced Draft . . . . . . . . . . . . . . . . . . . .
Large (Mine, etc.) . . . . . . . . . . . . . . . . .
Large Industrial . . . . . . . . . . . . . . . . . .
Light (Small Diameter) . . . . . . . . . . . . .
FEEDERS
Apron. Belt . . . . . . . . . . . . . . . . . . . . . .
Disc . . . . . . . . . . . . . . . . . . . . . . . . . . .
Screw . . . . . . . . . . . . . . . . . . . . . . . . . .
FLIGHT CONVEYORS
Uniform . . . . . . . . . . . . . . . . . . . . . . . .
Heavy . . . . . . . . . . . . . . . . . . . . . . . . . .
FOOD INDUSTRY . . . . . . . . . . . GENERATORS (Not Welding)
GRAVITY DISCHARGE
ELEVATORS . . . . . . . . . . . . . . 3 to Over
10 10
Hour Hour
1.25
1.25
1.25
1.50
1.25
1.25
1.50
1.50
1.25
1.25
See Table 2
1.25
1.25
1.50
1.50
1.25
1.50
...
1.50
1.25
1.50
1.25
1.50
1.25
1.50
1.25
1.50
1.25
1.25
Not Approved
Not Approved
1.25
1.25
Not Approved
See Table 2
1.25
...
1.50
1.50
1.50
1.00
1.25
1.25
1.50
1.50
1.50
1.25
1.25
1.25
1.25
1.50
1.25
1.50
1.25
1.25
1.25
1.50
See Table 2
1.25
1.25
1.00
1.25
Application
Service
Service
3 to Over
10
10
Hour Hour
3 to Over
10
10
Hour Hour
«HOISTS
Medium Duty . . . . . . . . . . . . . . . . . . . 1.25
1.50
Skip Hoist . . . . . . . . . . . . . . . . . . . . . 1.25
1.50
INDUCED DRAFT FANS . . . . . . . 1.25
1.50
KILNS . . . . . . . . . . . . . . . . . . See Mills. Rotary
LAUNDRY WASHERS . . . . . . . . 1.50
2.00
LAUNDRY TUMBLERS . . . . . . . 1.25
1.50
LINE SHAFTS
Driving Processing Equipment . . . . . . 1.25
1.50
Other Line Shafts, Light . . . . . . . . . . . 1.25
1.25
LOBE BLOWERS OR
1.50
COMPRESSORS . . . . . . . . . . . 1.25
LOOMS (Textile) . . . . . . . . . . . 1.25
1.50
LUMBER INDUSTRY . . . . . . . . . See Table 2
MACHINE TOOLS
Auxiliary Drives . . . . . . . . . . . . . . . . . 1.25
1.25
Bending Rolls . . . . . . . . . . . . . . . . . . . 1.25
1.50
Main Drives . . . . . . . . . . . . . . . . . . . . 1.25
1.50
Punch Press (Geared) . . . . . . . . . . . . 1.75
2.00
Tapping machines . . . . . . . . . . . . . . . 1.75
2.00
MANGLE (Textile) . . . . . . . . . . 1.25
1.50
MASH TUBS (Brewing &
Distilling) . . . . . . . . . . . . . . . . 1.25
1.25
MEAT GRINDERS (Food) . . . . . . 1.25
1.50
METAL MILLS
Draw Bench Carriages &
Main Drives . . . . . . . . . . . . . . . . . . . 1.25
1.50
Pinch, Dryer & Scrubber
Rolls, Reversing . . . . . . . . . . . . . . . Refer to Factory
Slitters . . . . . . . . . . . . . . . . . . . . . . . . 1.25
1.50
Table Conveyors.
Non-Reversing Group Drives . . . . . 1.50
1.50
Wire Drawing & Flattening
Machines . . . . . . . . . . . . . . . . . . . . 1.25
1.50
Wire Winding Machines . . . . . . . . . . . 1.50
1.50
MILLS. ROTARY
Pebble, Plain & Wedge Bar Mills
...
1.50
MIXER (Also see Agitators)
Concrete, Cont. & lnt. . . . . . . . . . . . . 1.25
1.50
Constant Density . . . . . . . . . . . . . . . . 1.25
1.50
Variable Density . . . . . . . . . . . . . . . . . 1.25
1.50
NAPPERS (Textile) . . . . . . . . . . 1.25
1.50
OIL INDUSTRY . . . . . . . . . . . . See Table 2
OVEN CONVEYORS
Uniform . . . . . . . . . . . . . . . . . . . . . . . 1.25
1.25
Heavy Duty . . . . . . . . . . . . . . . . . . . . . 1.25
1.50
PAPER MILLS . . . . . . . . . . . . . See Table 2
PASSENGER ELEVATORS
Not Approved
PEBBLE MILLS . . . . . . . . . . . . . . .
1.50
PROPORTIONING PUMPS . . . . . 1.25
1.50
PUG MILLS (Clay) . . . . . . . . . . 1.25
1.50
Application
PUMPS
Centrifugal . . . . . . . . . . . . . . . . . . . . . 1.25
1.25
Proportioning . . . . . . . . . . . . . . . . . . . 1.25
1.50
Reciprocating
Single Act., 3 or more Cyl. . . . . . . . . . 1.25
1.50
Double Act., 2 or more Cyl. . . . . . . . . 1.25
1.50
Rotary: Gear, Lobe, Vane . . . . . . . . . . 1.25
1.25
RECIPROCATING
COMPRESSORS
MultI-Cylinder . . . . . . . . . . . . . . . . . . 1.50
1.75
ROTARY
Pumps . . . . . . . . . . . . . . . . . . . . . . . . 1.25
1.25
Screens (Sand or Gravel) . . . . . . . . . . 1.25
1.50
RUBBER & PLASTICS
INDUSTRIES . . . . . . . . . . . . . . See Table 2
SAND MULLERS . . . . . . . . . . . 1.25
1.50
SCREENS
Air Washing . . . . . . . . . . . . . . . . . . . . 1.00
1.25
Rotary—Sand or Gravel . . . . . . . . . . . 1.25
1.50
Traveling Water Intake . . . . . . . . . . . . 1.00
1.25
SCREW CONVEYORS
Uniform . . . . . . . . . . . . . . . . . . . . . . . 1.25
1.25
Heavy Duty or Feeder
1.25
1.50
SCUM BREAKERS (Sewage)
1.50
1.50
SEWAGE DISPOSAL
See Table 2
SHAKER CONVEYORS
1.75
2.00
SHEETERS (Rubber)
...
1.50
SINGLE ACTING PUMP
3 or more Cylinders . . . . . . . . . . . . . . 1.25
1.50
«SKI TOWS & LIFTS . . . . . . . . Not Approved
«SKIP HOIST . . . . . . . . . . . . . 1.25
1.50
SLAB PUSHERS . . . . . . . . . . . . 1.50
1.50
SLITTERS (Metal) . . . . . . . . . . 1.25
1.50
SLUDGE COLLECTORS (Sewage)
1.25
1.25
SOAPERS (Textile) . . . . . . . . . . 1.25
1.50
SPINNERS (Textile) . . . . . . . . . 1.25
1.50
STEERING GEARS . . . . . . . . . . Refer to Factory
STOKERS . . . . . . . . . . . . . . . . 1.25
1.25
TABLE CONVEYORS
(Non-Reversing)
Group Drives . . . . . . . . . . . . . . . . . . . 1.50
1.50
TENTER FRAMES (Textile) . . . . 1.25
1.50
TEXTILE INDUSTRY . . . . . . . . . See Table 2
THICKENERS (Sewage) . . . . . . 1.50
1.50
VACUUM FILTERS (Sewage)
1.50
1.50
VANE BLOWERS . . . . . . . . . . . 1.25
1.50
WINCHES (Dredges) . . . . . . . . 1.25
1.50
WINDERS (Textile) . . . . . . . . . 1.25
1.50
WIRE
Drawing Machines . . . . . . . . . . . . . . . 1.25
1.50
Winding Machines . . . . . . . . . . . . . . . 1.50
1.50
++ Selection of Rexnord products for applications whose primary purpose is the transportation of people is not approved. This includes such applications as freight or passenger elevators.
If the primary purpose of the application is material conveyance and occasionally people are transported, the Factory warranty may remain in effect provided the design load conditions are not exceeded and
certification to the appropriate safety codes and load conditions has been obtained by the system designer or end user from the appropriate enforcement authorities.
Contact your local representative for proper selection of a Falk RAM mixer drive.
©Rexnord, 1998, 2013
(281-110) 9
UC – Exact Ratios
Low Ratio Double Reduction
Ratio Code
(3 Characters)
1.4
1.8
2.2
2.5
2.8
3.2
4.0
4.5
03
1.440
1.945
2.213
2.507
...
3.206
...
4.361
04
1.454
2.039
2.247
2.552
2.815
3.241
3.949
4.537
Drive Size
06
1.446
2.033
2.278
2.557
2.812
3.248
3.953
4.392
07
1.453
2.013
2.261
2.486
...
3.247
...
4.484
08
1.449
2.054
2.282
2.538
...
3.282
...
4.599
Double Reduction
Ratio Code
(3 Characters)
1.4
1.8
2.2
2.5
2.8
3.2
3.6
4.0
4.5
5.0
5.6
6.3
7.1
8.0
9.0
10.
11.
12.
14.
16.
18.
20.
22.
25.
28.
32.
36.
40.
45.
50.
56.
63.
71.
201
...
...
...
...
...
...
3.750
...
...
5.066
5.762
6.528
...
8.348
8.997
...
11.36
12.88
14.71
16.37
18.05
19.86
23.27
...
27.92
32.54
36.16
...
43.54
49.91
56.72
...
...
202
...
...
...
...
...
...
3.589
...
...
5.034
5.547
6.299
...
8.000
9.088
...
11.15
12.37
14.05
15.97
17.58
20.23
21.99
...
26.40
31.68
35.69
...
41.49
47.09
53.54
...
...
203
...
...
...
...
...
...
3.589
...
...
5.034
5.547
6.299
...
8.000
9.088
...
11.15
12.37
14.05
15.97
17.58
20.23
21.99
...
26.40
31.68
35.69
...
41.49
47.09
53.54
...
...
204
...
...
...
...
...
...
3.585
...
...
5.040
5.649
6.341
...
8.053
9.129
...
10.89
12.54
14.58
16.31
17.39
20.61
22.00
...
27.30
32.19
35.25
...
43.20
48.15
54.00
...
...
Drive Size
205
206
...
...
...
...
...
...
...
...
...
...
...
...
3.585
...
...
...
...
...
5.040
4.438
5.649
6.240
6.341
6.994
...
...
8.053
7.851
9.129
9.970
...
...
10.89
11.30
12.54
13.48
14.58
15.52
16.31
18.05
17.39
20.20
20.61
21.53
22.00
25.51
...
...
27.30
27.24
32.19
33.80
35.25
39.86
...
...
43.20
43.64
48.15
53.49
54.00
59.61
...
66.86
...
...
207
...
...
...
...
...
...
3.678
...
...
5.094
5.722
6.292
...
8.218
9.344
...
11.35
12.48
14.34
16.26
17.94
20.54
23.23
...
26.93
32.12
35.17
...
42.21
48.56
53.96
...
...
208
...
...
...
...
...
...
3.678
...
...
5.214
5.792
6.442
...
8.330
9.352
...
11.47
12.92
15.04
16.69
18.26
20.66
23.32
...
28.27
32.97
36.21
...
44.38
48.46
55.80
...
...
09
1.479
2.036
2.282
2.562
2.969
3.301
3.688
4.088
4.582
5.073
5.686
6.628
7.404
8.224
9.188
10.27
11.71
12.74
14.53
16.59
18.43
20.59
22.87
26.04
28.74
32.31
35.67
40.25
44.44
49.07
55.18
61.13
68.74
10
1.442
2.015
2.191
2.489
2.992
3.242
3.500
4.179
4.545
4.938
5.370
6.724
7.260
7.945
8.578
10.59
11.98
12.51
14.16
16.43
18.25
19.41
21.57
26.03
29.99
30.76
35.44
37.06
42.70
47.93
51.49
57.75
62.05
Triple Reduction
Ratio Code
(3 Characters)
56.
63.
71.
80.
90.
100
112
125
140
160
180
200
225
250
10 (281-110)
201
58.46
64.45
70.93
83.10
...
99.70
116.2
129.1
...
155.5
178.2
202.6
...
...
202
57.03
62.87
69.19
81.07
...
97.26
113.4
126.0
...
151.7
173.9
197.6
...
...
203
57.03
62.87
69.19
81.07
...
97.26
113.4
126.0
...
151.7
173.9
197.6
...
...
204
58.38
64.29
73.95
80.40
...
96.52
115.8
130.5
...
151.7
172.2
195.8
...
...
Drive Size
205
206
58.38
...
64.29
72.28
73.95
79.60
80.40
91.56
...
...
96.52
99.54
115.8
119.5
130.5
143.4
...
...
151.7
161.6
172.2
187.8
195.8
213.2
...
242.4
...
...
207
58.95
62.83
74.47
79.51
...
98.66
116.3
127.4
...
156.1
174.0
195.2
...
...
208
60.33
66.02
74.69
84.31
...
102.2
119.2
130.9
...
160.4
175.2
201.8
...
...
09
59.85
66.49
74.26
82.51
93.92
103.7
116.5
128.7
145.2
160.3
177.0
199.0
220.5
248.0
10
60.23
66.93
71.17
79.08
95.44
110.0
112.8
129.9
135.9
156.6
175.7
188.8
211.8
227.5
©Rexnord, 1998, 2013
UC – Exact Ratios
Quadruple Reduction
Ratio Code †
(3 Characters)
225
250
280
300
360
400
450
500
650
730
860
10C
11C
13C
15C
18C
20C
24C
27C
Drive Size
203
235.0
261.4
287.8
317.3
365.0
401.7
436.7
511.7
614.2
736.9
884.3
1031
1161
1291
1500
1807
2051
2350
2671
204
232.8
260.5
277.6
305.7
362.3
416.8
445.0
483.8
600.3
720.7
849.8
1020
1117
1258
1542
1792
1998
2268
2578
205
232.8
260.5
277.6
305.7
362.3
416.8
445.0
483.8
600.3
720.7
849.8
1020
1117
1258
1542
1792
1998
2268
2578
206
...
...
272.9
313.9
365.1
396.9
444.1
533.1
568.2
681.9
808.1
972.2
1130
1402
1592
1877
2055
2337
2519
204
2655
3095
3650
4055
4440
5347
6553
7511
8372
9514
10670
205
2655
3095
3650
4055
4440
5347
6553
7511
8372
9514
10670
206
2649
3088
3832
4258
5021
6046
6620
7588
8624
9300
10569
207
229.0
259.7
286.4
315.4
361.2
415.5
469.8
510.7
592.1
710.8
847.8
1017
1114
1255
1506
1751
2015
2287
2600
208
228.9
259.0
301.2
337.0
359.2
425.7
480.5
513.0
621.9
771.8
900.0
1061
1166
1277
1564
1917
2094
2333
2617
09
231.1
258.2
300.2
335.8
358.1
424.4
471.4
503.1
624.4
736.2
882.1
1040
1148
1340
1580
1730
2120
2363
2650
10
220.3
242.2
278.3
315.6
348.2
398.7
443.0
501.1
580.9
692.8
828.4
988.0
1138
1246
1540
1686
2023
2327
2586
207
2619
3053
3641
4046
4430
5335
6403
7339
8443
9596
10662
208
2728
3274
3818
4302
4726
5494
6733
7641
8344
9486
10924
09
2598
3119
3742
4216
4655
5411
6742
7652
8449
9605
11966
10
2446
3035
3579
3919
4515
5533
6106
7483
8340
9354
10048
†† Ratio with letter C = 00. Example: 19C = 1900
Quadruple Reduction t
Ratio Code †
(3 Characters)
27C
32C
36C
40C
46C
55C
65C
74C
84C
95C
10K
Drive Size
203
2632
3068
3681
4091
4609
5550
6452
7396
8394
9540
10845
 Refer to the Factory.
†† Ratio with letter C = 00. Example: 19C = 1900.
Ratio with letter K = 000. Example: 12K = 12000.
©Rexnord, 1998, 2013
(281-110) 11
UC – Drive Mounting Position
Mounting 5
Mounting 1
Mounting 4
Mounting 6 ‡
Wall Mounting 3
Wall Mounting 2
Mounting 8
Mounting 9 ‡
Mounting 7
UC – Motor Mounting Position
‡‡ Use motor fitted with a seal.
Conduit box position when viewed from L.S. shaft of base
mounted drive with mounting feet down.
A - Conduit box horizontal on right side, 0°.
B - Conduit box vertical on bottom side, 90°.
C - conduit box horizontal on left side, 180°.
D - Conduit box vertical on top side, 270°.
Standard NEMA motor mounting position is “C”.
Standard IEC motor mounting position is “A”.
12 (281-110)
©Rexnord, 1998, 2013
UC – Output Shaft Options
C
D
B
E
W
TAPPED
HOLE
A
F
Table 5 — Low Ratio – Dimensions – Standard Shaft (in) — Metric Shaft (mm)
Drive Size
Type of
Output Shaft
03
04
Metric
Std.
Shaft 
Nomenclature
Entry
C
A
B
C
D
E
40
32
4
6
22.5
F
20 k6
W
M6 x 1
16 Deep
05
Metric
Std.
Shaft 
N
C
N
1.58
1.28
...
0.19
0.83
0.7500
0.7495
1/4 UNF x
0.63 Deep
50
40
7
8
28
1.97
1.75
...
0.25
1.106
1.000
0.9995
1/4 UNF x
0.63 Deep
25 k6
M10 x 1.5
22 Deep
07
Metric
Std.
Shaft 
C
Dimensions
60
50
7
8
33
30 k6
M10 x 1.5
22 Deep
08
Metric
Std.
Shaft 
Metric
Std.
Shaft 
N
C
N
C
N
2.36
2.00
...
0.25
1.36
1.2500
1.2495
3/8 UNF x
0.87 Deep
80
70
5
12
43
3.15
2.375
...
0.375
13.79
1.6250
1.6240
5/8 UNF x
1.42 Deep
40 k6
M16 x 2.0
36 Deep
100
80
10
14
53.5
3.94
2.75
...
0.5
2.35
2.1250
2.1240
5/8 UNF x
1.42 Deep
50 k6
M16 x 2.0
36 Deep
„„ Standard shafts have an open ended keyway to ANSI standard B17.1 and therefore no dimension C. All other shafts shown have keyways in accordance with B S 4235: Part 1.
Available from stock.
Table 5A — Dimensions – Standard Shaft (in) — Metric Shaft (mm)
Drive Size
Type of
Output Shaft
201
202
Metric
Std.
Shaft 
Nomenclature
Entry
C
A
B
C
D
E
40
32
4
6
22.5
F
20 k6
W
M6 x 1
16 Deep
203
Metric
Std.
Shaft 
N
C
N
1.58
1.28
...
0.19
0.83
0.7500
0.7495
1/4 UNF x
0.63 Deep
50
40
4
8
28
1.97
1.75
...
0.25
1.106
1.000
0.9995
1/4 UNF x
0.71 Deep
25 k6
M10 x 1.5
22 Deep
204
Metric
Std.
Shaft 
C
Dimensions
50
40
4
8
28
25 k6
M10 x 1.5
22 Deep
205
Metric
Std.
Shaft 
Metric
Std.
Shaft 
N
C
N
C
N
1.97
1.75
...
0.25
1.106
1.0000
0.9995
1/4 UNF x
0.71 Deep
60
50
7
8
33
2.36
2.00
...
0.25
1.36
1.2500
1.2495
3/8 UNF x
1.86 Deep
70
60
7
10
38
2.76
2.375
...
0.31
1.51
1.3750
1.3745
3/8 UNF x
0.75 Deep
30 k6
M10 x 1.5
22 Deep
35 k6
M12 x 1.75
28 Deep
„„ Standard shafts have an open ended keyway to ANSI standard B17.1 and therefore no dimension C. All other shafts shown have keyways in accordance with B S 4235: Part 1.
Available from stock.
Drive Size
Type of
Output Shaft
206
207
Metric
Std.
Shaft 
Nomenclature
Entry
C
A
B
C
D
E
70
60
7
10
38
F
35 k6
W
M12 x 1.75
28 Deep
208
Metric
Std.
Shaft 
N
C
N
2.76
2.375
...
0.31
1.51
1.3750
1.3745
3/8 UNF x
0.75 Deep
80
70
5
12
43
3.15
2.375
...
0.375
1.78
1.6250
1.6240
1/4 UNF x
0.71 Deep
40 k6
M16 x 2.0
36 Deep
09
Metric
Std.
Shaft 
C
Dimensions
100
80
10
14
53.5
50 k6
M16 x 2.0
36 Deep
10
Metric
Std.
Shaft 
Metric
Std.
Shaft 
N
C
N
C
N
3.94
2.75
...
0.5
2.34
1.0000
0.9995
1/4 UNF x
0.71 Deep
120
100
10
18
64
4.72
3.69
...
0.625
2.65
2.3750
2.3740
3/4 UNF x
1.65 Deep
60 m6
M20 x 2.5
42 Deep
140
110
15
20
74.5
70 m6
M20 x 2.5
42 Deep
5.51
4.625
...
0.750
3.20
2.8750
2.8740
3/4 UNF x
1.65 Deep
„„ Standard shafts have an open ended keyway to ANSI standard B17.1 and therefore no dimension C. All other shafts shown have keyways in accordance with B S 4235: Part 1.
Available from stock.
©Rexnord, 1998, 2013
(281-110) 13
UC – Motor Adapters
The ULTRAMITE concentric gearmotor accommodates NEMA (Input Type “A”) or IEC (Input Type “G”) motor frame sizes.
Tables 6 & 6A below and 7 on the next page identify the appropriate motor adapter symbol that pertains to specific
motor frame size, drive size, ratio, and reduction combinations. If a motor adapter symbol is not listed for a particular
combination of motor frame size, drive size, ratio, and reduction, then that combination is not offered.
For Gear Drives (Inputs Types “N” and “C”), the motor adapter symbol is not used.
TABLE 6 — Low Ratio – Input Type A – NEMA Motor Adapter Symbols
03
Double
Motor
Frame
Size
1.4 9.0
A
B
C
...
...
56C
143TC/145TC
182TC/184TC
213TC/215TC
254TC/256TC
Drive Size
06
Double
Ratio Range
1.4 10 9.0
71
...
A
....
B
C
C
D
...
...
...
04
Double
10 71
A
B
...
...
...
1.4 14
A
B
C
...
...
16 71
A
B
...
...
...
07
Double
1.4 9.0
...
...
C
D
E
08
Double
10 71
A
B
C
D
...
1.4 14
...
...
C
D
E
16 71
A
B
C
D
E
Triple
205
Double
TABLE 6A — Input Type A – NEMA Motor Adapter Symbols
Motor
Frame
Size
56C
143TC/145TC
182TC/184TC
213TC/215TC
Motor
Frame
Size
56C
143TC/145TC
182TC/184TC
213TC/215TC
254TC/256TC
284TC/286TC
324TC/326TC
14 (281-110)
11 56
56 200
3.6 14
16 56
56 200
Drive Size
203
Double
Triple
Ratio Range
3.6 16 56 14
56
200
A
B
...
...
A
B
...
...
A
B
C
...
A
B
...
...
A
B
...
...
A
B
C
...
201
Double
3.6 9.0
A
B
C
...
Triple
202
Double
Triple
A
B
...
...
A
B
...
...
5.0 12
14 63
56 225
3.6 90
11 56
56 200
Drive Size
208
Double
Triple
Ratio Range
3.6 16 56 14
56
200
...
...
C
D
...
...
...
A
B
C
...
...
...
...
A
B
...
...
...
...
...
...
...
C
D
E
...
...
A
B
C
D
...
...
...
A
B
C
...
...
...
...
...
...
C
D
E
...
...
206
Double
Triple
207
Double
Triple
A
B
C
D
E
....
...
A
B
C
D
...
...
...
204
Double
Triple
3.6 11
12 56
56 200
3.6 11
12 56
56 200
...
...
C
D
A
B
C
...
A
B
...
...
...
...
C
D
A
B
C
...
A
B
...
...
09
Double
10
Triple
Double
Triple
1.4 14
16 71
56 200
1.4 14
16 71
56 200
...
...
...
...
E
F
G
...
...
C
D
E
F
G
A
B
C
...
...
...
...
...
...
...
...
E
F
G
...
...
C
D
E
F
G
...
...
C
D
E
F
G
©Rexnord, 1998, 2013
Table 7 — Low Ratio – Input Type G– IEC Motor Adapter Symbols
Motor
Frame
Size
63/D
71/D
71/C
80/D
80/C
90/D
90/C
100/D
100/C
112/D
112/C
132/D
132/C
160/D
1.4 9.0
10 71
1.4 14
16 71
Drive Size
05
Double
Ratio Range
1.4 10 9.0
71
A
B
C
D
E
F
G
...
J
...
M
...
...
...
A
B
C
D
E
F
G
...
J
...
M
...
...
...
...
...
...
D
E
F
G
...
J
...
M
...
...
...
A
B
C
D
E
F
G
...
J
...
M
...
...
...
...
...
...
D
E
F
G
H
J
K
M
N
P
...
03
Double
04
Double
A
B
C
D
E
F
G
H
J
K
M
N
P
...
07
Double
08
Double
1.4 9.0
10 71
1.4 14
16 71
...
...
...
...
...
...
...
H
J
K
M
N
P
R
...
...
...
D
E
F
G
H
J
K
M
N
P
R
...
...
...
...
...
...
...
H
...
K
...
N
...
R
...
...
...
D
...
F
...
H
...
K
...
N
...
R
Symbols in Bold Face – Gear Drive Sizes 03 & 04 furnished by Falk less motor will be furnished without lubricant.
TABLE 7A — Input Type G – IEC Motor Adapter Symbols
Motor
Frame
Size
63/D
71/D
71/C
80/D
80/C
90/D
90/C
100/D
100/C
112/D
112/C
132/D
Motor
Frame
Size
63/D
71/D
71/C
80/D
80/C
90/D
90/C
100/D
100/C
112/D
112/C
132/D
132/C
160/D
180/D
200/D
225/D
©Rexnord, 1998, 2013
201
Double
3.6 9.0
A
B
C
D
E
F
G
...
J
...
M
...
11 56
A
B
C
D
E
F
G
...
J
...
M
...
206
Double
5.0 12
...
...
...
D
...
F
...
H
J
K
M
N
...
...
...
...
...
14 63
A
B
C
D
E
F
G
H
J
K
M
N
...
...
...
...
...
Triple
56 200
A
B
C
D
E
F
G
...
...
...
...
...
Triple
56 225
A
B
C
D
E
F
G
...
...
...
...
...
...
...
...
...
...
202
Double
3.6 14
...
...
...
D
E
F
G
...
J
...
M
...
16 56
A
B
C
D
E
F
G
...
J
...
M
...
207
Double
3.6 90
...
...
...
...
...
...
...
H
J
K
M
N
P
R
...
...
...
11 56
...
...
...
D
E
F
G
H
J
K
M
N
P
R
...
...
...
Triple
56 200
A
B
C
D
E
F
G
...
...
...
...
...
Triple
56 200
...
...
...
D
E
F
G
H
...
K
...
...
...
...
...
...
...
Drive Size
203
Double
Triple
Ratio Range
3.6 16 56 14
56
200
...
A
A
...
B
B
...
C
C
D
D
D
E
E
E
F
F
F
G
G
G
...
...
...
J
J
...
...
...
...
M
M
...
...
...
...
Drive Size
208
Double
Triple
Ratio Range
3.6 16 56 14
56
200
...
...
...
...
...
...
...
...
...
...
D
D
...
...
E
...
F
F
...
...
G
H
H
H
...
...
J
K
K
K
...
...
M
N
N
N
...
...
P
R
R
R
...
...
...
...
...
...
...
...
...
204
Double
3.6 11
...
...
...
D
...
F
G
H
J
K
M
N
12 56
A
B
C
D
E
F
G
H
J
K
M
N
Triple
56 200
A
B
C
D
E
F
G
...
...
...
...
...
205
Double
3.6 11
...
...
...
D
...
F
G
H
J
K
M
N
12 56
A
B
C
D
E
F
G
H
J
K
M
N
09
Double
1.4 14
...
...
...
...
...
...
...
...
...
...
...
...
...
R
T
U
W
16 71
...
...
...
D
...
F
...
H
...
K
...
N
...
R
T
U
W
Triple
56 200
A
B
C
D
E
F
G
...
...
...
...
...
10
Triple
56 200
...
...
...
D
...
F
...
H
...
K
...
...
...
...
...
...
...
Double
1.4 14
...
...
...
...
...
...
...
...
...
...
...
...
...
R
T
U
W
16 71
...
...
...
...
...
...
...
H
...
K
...
N
...
R
T
U
W
Triple
56 200
...
...
...
D
...
F
...
H
...
K
...
N
...
R
T
U
W
(281-110) 15
Motor Detail (NEMA C-Face)
CC
4 HOLES
BF - TAP
U
BD
AJ
AK
FP
AH
Table 8 — Typical Motor Dimensions – Inches
Motor
Frame
Size
BD
AJ
AK
U
AH
CC
Max
FP
BF
Tap UNC
56C
142TC/145TC
6.50
6.50
5.88
5.88
4.5
4.5
0.625
0.875
2.06
2.12
11.38
14.19
7.19
7.19
0.375-16
0.375-16
CC
4 HOLES
BF - TAP
U
BD AK AJ
FP
AH
Table 9 — Typical Motor Dimensions – Inches
Motor
Frame
Size
BD
AJ
AK
U
AH
CC Max
FP
BF
Tap UNC
182TC/184TC
213TC/215TC
254TC/256TC
284TC/286TC
324TC/326TC
364TC/365TC
404TC/405TC
9.00
9.00
10.00
11.25
13.38
13.38
13.88
7.25
7.25
7.25
9.00
11.00
11.00
11.00
8.5
8.5
8.5
10.5
12.5
12.5
12.5
1.125
1.375
1.625
1.875
2.125
2.375
2.875
2.63
3.13
3.75
4.38
5.00
5.63
7.00
18.06
19.44
23.63
27.56
30.25
32.56
36.88
8.50
10.19
12.50
15.56
16.94
19.00
20.63
0.50-13
0.50-13
0.50-13
0.50-13
0.63-11
0.63-11
0.63-11
16 (281-110)
©Rexnord, 1998, 2013
UC — Low Ratio Gearmotor Selection Table
0.25 HP/1750 rpm/56C Frame Motor
Approx.
Output
rpm
Exact
Ratio
Actual
Output
Torque
(lb-in)
1215
897
792
697
545
400
1.44
1.95
2.21
2.51
3.21
4.36
13
17
20
22
29
41
Service
Factor
Overhung
Load
(lb)
23.20
19.08
17.16
15.92
12.96
14.16
319
350
361
368
379
406
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
Part No.
Drive Designation
Part No.
03UCBN2A1.4A_A
1.8
2.2
2.5
3.2
4.5
4740000
4740004
4740008
4740012
4740020
4769116
03UCFN2A1.4A_A
1.8
2.2
2.5
3.2
4.5
4740819
4740823
4740827
4740831
4740839
4769119
0.33 HP/1750 rpm/56C Frame Motor
Approx.
Output
rpm
Exact
Ratio
1215
897
792
697
545
400
1.44
1.95
2.21
2.51
3.21
4.36
©Rexnord, 1998, 2013
Actual
Output
Torque
(lb-in)
Service
Factor
17
23
26
30
38
54
17.58
14.45
13.00
12.06
9.82
10.73
Overhung
Load
(lb)
318
349
360
366
377
404
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
Part No.
Drive Designation
Part No.
03UCBN2A1.4A_A
1.8
2.2
2.5
3.2
4.5
4740000
4740004
4740008
4740012
4740020
4769116
03UCFN2A1.4A_A
1.8
2.2
2.5
3.2
4.5
4740819
4740823
4740827
4740831
4740839
4769119
Motors are available from the
Factory or Distributors.
0.25 HP/56C Motor Part No.
1940393 Conforms to the
following specifications:
Eneryg Eggicient
C Face motor less base, TEFC,
1750 rpm, 208–230/460
Volts, 3 Phase, 60 Hz, NEMA
B,1.15 Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
Motors are available from the
Factory or Distributors.
0.33 HP/56C Motor Part No.
1940394 Conforms to the
following specifications:
Eneryg Eggicient
C Face motor less base, TEFC,
1750 rpm, 208–230/460
Volts, 3 Phase, 60 Hz,NEMA
B, 1.15 Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
(281-110) 17
UC — Low Ratio Gearmotor Selection Table
0.50 HP/1750 rpm/56C Frame Motor
Approx.
Output
rpm
1215
897
792
697
545
400
Exact
Ratio
Actual
Output
Torque
(lb-in)
Service
Factor
Overhung
Load
(lb)
1.44
1.95
2.21
2.51
3.21
4.36
26
35
40
45
58
82
11.60
9.54
8.58
7.96
6.48
7.08
316
346
357
362
373
399
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
Part No.
Drive Designation
Part No.
03UCBN2A1.4A_A
1.8
2.2
2.5
3.2
4.5
4740000
4740004
4740008
4740012
4740020
4769116
03UCFN2A1.4A_A
1.8
2.2
2.5
3.2
4.5
4740819
4740823
4740827
4740831
4740839
4769119
Motors are available from the
Factory or Distributors.
0.50 HP/56C Motor
Part No. 1940395 Conforms to
the following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz,NEMA B,
1.15 Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
0.75 HP/1750 rpm/56C Frame Motor
Approx.
Output
rpm
Exact
Ratio
1215
897
792
697
545
400
1.44
1.95
2.21
2.51
3.21
4.36
18 (281-110)
Actual
Output
Torque
(lb-in)
Service
Factor
39
53
60
68
87
124
7.73
6.36
5.72
5.31
4.32
4.72
Overhung
Load
(lb)
313
342
352
357
367
391
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
Part No.
Drive Designation
Part No.
03UCBN2A1.4A_A
1.8
2.2
2.5
3.2
4.5
4740000
4740004
4740008
4740012
4740020
4769116
03UCFN2A1.4A_A
1.8
2.2
2.5
3.2
4.5
4740819
4740823
4740827
4740831
4740839
4769119
Motors are available from the
Factory or Distributors.
0.75HP/56C Motor
Part No. 1940396 Conforms to
the following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz, NEMA B, 1.15
Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
©Rexnord, 1998, 2013
UC — Low Ratio Gearmotor Selection Table
1.0 HP/1750 rpm/143C Frame Motor
Approx.
Output
rpm
1215
897
792
697
545
400
Exact
Ratio
Actual
Output
Torque
(lb-in)
Service
Factor
Overhung
Load
(lb)
1.44
1.95
2.21
2.51
3.21
4.36
52
71
80
91
117
165
5.80
4.77
4.29
3.98
3.24
3.54
310
338
348
351
360
383
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
03UCBN2A1.4A_B
1.8
2.2
2.5
3.2
4.5
Part No.
4740001
4740005
4740009
4740013
4740021
4769117
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
03UCFN2A1.4A_B
1.8
2.2
2.5
3.2
4.5
Part No.
4740820
4740824
4740828
4740832
4740840
4769120
Motors are available from the
Factory or Distributors.
1.0 HP/143TC Motor Part No.
1940397 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz, NEMA B,1.15
Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
1.5 HP/1750 rpm/145C Frame Motor
Approx.
Output
rpm
1215
897
792
697
545
400
Exact
Ratio
Actual
Output
Torque
(lb-in)
Service
Factor
Overhung
Load
(lb)
1.44
1.95
2.21
2.51
3.21
4.36
78
106
121
137
175
248
3.87
3.18
2.86
2.65
2.16
2.36
304
331
339
340
348
368
©Rexnord, 1998, 2013
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
03UCBN2A1.4A_B
1.8
2.2
2.5
3.2
4.5
Part No.
4740001
4740005
4740009
4740013
4740021
4769117
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
03UCFN2A1.4A_B
1.8
2.2
2.5
3.2
4.5
Part No.
4740820
4740824
4740828
4740832
4740840
4769120
Motors are available from the
Factory or Distributors.
1.5 HP/145TC Motor Part No.
1940398 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz, NEMA B, 1.15
Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
(281-110) 19
UC — Low Ratio Gearmotor Selection Table
2.0 HP/1750 rpm/145TC Frame Motor
Approx.
Output
rpm
1215
897
792
697
545
400
686
621
540
443
386
Exact
Ratio
Actual
Output
Torque
(lb-in)
Service
Factor
Overhung
Load
(lb)
1.44
1.95
2.21
2.51
3.21
4.36
2.55
2.82
3.24
3.95
4.54
105
142
161
183
234
330
186
212
236
288
317
2.90
2.39
2.15
1.99
1.62
1.77
3.98
4.17
3.52
3.48
3.30
298
323
330
328
335
352
529
537
541
556
561
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
03UCBN2A1.4A_B
1.8
2.2
2.5
3.2
4.5
04UCBN2A2.5A_B
2.8
3.2
4.0
4.5
Part No.
4740001
4740005
4740009
4740013
4740021
4769117
4740127
4740131
4740135
4740143
4769123
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
03UCFN2A1.4A_B
1.8
2.2
2.5
3.2
4.5
04UCFN2A2.5A_B
...
3.2
...
4.5
Part No.
4740820
4740824
4740828
4740832
4740840
4769120
4740946
...
4740954
...
4769127
Motors are available from the
Factory or Distributors.
2.0 HP/145TC Motor Part No.
1940399 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz,NEMA B, 1.15
Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
3.0 HP/1750 rpm/182TC Frame Motor
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Approx.
Output
rpm
Exact
Ratio
Actual
Output
Torque
(lb-in)
Service
Factor
Overhung
Load
(lb)
1215
897
792
697
545
1207
858
778
1.44
1.95
2.21
2.51
3.21
1.45
2.04
2.25
157
213
242
274
351
159
223
246
1.93
1.59
1.43
1.33
1.08
3.03
2.90
2.84
286
307
312
306
310
440
486
498
686
621
540
2.55
2.82
3.24
279
308
355
2.65
2.78
2.34
512
523
518
2.5
2.8
3.2
4740128
4740132
4740136
2.5
...
3.2
4740947
...
4740955
443
386
3.95
4.54
432
476
2.32
2.20
532
535
4.0
4.5
4740144
4769124
...
4.5
...
4769128
20 (281-110)
Drive Designation
Part No.
Drive Designation
Part No.
03UCBN2A1.4A_C
1.8
2.2
2.5
3.2
04UCBN2A1.4A_C
1.8
2.2
4740002
4740006
4740010
4740014
4740022
4740116
4740120
4740124
03UCFN2A1.4A_C
1.8
2.2
2.5
3.2
04UCFN2A1.4A_C
1.8
2.2
4740821
4740825
4740829
4740833
4740841
4740935
4740939
4740943
Motors are available from the
Factory or Distributors.
3.0 HP/182TC Motor Part
No. 194044 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz, NEMA B, 1.15
Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
©Rexnord, 1998, 2013
UC — Low Ratio Gearmotor Selection Table
5.0 HP/1750 rpm/184TC Frame Motor
Approx.
Output
rpm
1215
897
1207
858
778
686
621
540
443
386
1207
862
768
684
623
538
443
396
Exact
Ratio
Actual
Output
Torque
(lb-in)
Service
Factor
Overhung
Load
(lb)
1.44
1.95
1.45
2.04
2.25
2.55
2.82
3.24
3.95
4.54
1.45
2.03
2.28
2.56
2.81
3.25
3.95
4.39
263
355
265
372
410
466
514
592
721
794
264
371
416
467
513
593
722
809
1.16
0.95
1.82
1.74
1.70
1.59
1.67
1.41
1.39
1.32
3.24
3.08
3.00
2.90
3.18
2.68
2.66
2.50
263
276
420
458
467
478
490
474
485
483
750
828
855
884
921
932
960
967
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
Part No.
Drive Designation
Part No.
03UCBN2A1.4A_C
1.8
04UCBN2A1.4A_C
1.8
2.2
2.5
2.8
3.2
4.0
4.5
06UCBN2A1.4A_C
1.8
2.2
2.5
2.8
3.2
4.0
4.5
4740002
4740006
4740116
4740120
4740124
4740128
4740132
4740136
4740144
4769124
4740232
4740235
4740238
4740241
4740244
4740247
4740253
4769130
03UCFN2A1.4A_C
1.8
04UCFN2A1.4A_C
1.8
2.2
2.5
...
3.2
...
4.5
06UCFN2A1.4A_C
1.8
2.2
2.5
...
3.2
...
4.5
4740821
4740825
4740935
4740939
4740943
4740947
...
4740955
...
4769128
4741051
4741054
4741057
4741060
...
4741066
...
4769133
Motors are available from the
Factory or Distributors.
5.0 HP/184TC Motor Part No.
1940401 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz, NEMA B, 1.15
Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
7.5 HP/1750 rpm/213TC Frame Motor
Approx.
Output
rpm
1207
862
768
684
623
538
443
396
1207
871
774
703
538
391
Exact
Ratio
Actual
Output
Torque
(lb-in)
Service
Factor
Overhung
Load
(lb)
1.45
2.03
2.28
2.56
2.81
3.25
3.95
4.39
1.45
2.01
2.26
2.49
3.25
4.48
396
556
624
700
770
889
1083
1214
398
551
619
681
889
1228
2.16
2.05
2.00
1.93
2.12
1.79
1.77
1.67
2.83
2.83
2.83
2.83
2.83
2.83
730
800
823
849
888
886
914
915
973
1071
1109
1138
1226
1290
©Rexnord, 1998, 2013
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
06UCBN2A1.4A_D
1.8
2.2
2.5
2.8
3.2
4.0
4.5
07UCBN2A1.4A_D
1.8
2.2
2.5
3.2
4.5
Part No.
4740233
4740236
4740239
4740242
4740245
4740248
4740254
4769131
4740350
4740354
4740358
4740362
4740370
4769139
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
06UCFN2A1.4A_D
1.8
2.2
2.5
...
3.2
...
4.5
07UCFN2A1.4A_D
1.8
2.2
2.5
3.2
4.5
Part No.
4741052
4741055
4741058
4741061
...
4741067
...
4769134
4741169
4741173
4741177
4741181
4741189
4769144
Motors are available from the
Factory or Distributors.
7.5 HP/213TC Motor Part No.
1940402 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz, NEMA B, 1.15
Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
(281-110) 21
UC — Low Ratio Gearmotor Selection Table
10 HP/1750 rpm/215TC Frame Motor
Approx.
Output
rpm
Exact
Ratio
Actual
Output
Torque
(lb-in)
Service
Factor
Overhung
Load
(lb)
1207
862
768
684
623
538
443
395
1207
871
774
703
538
391
1207
854
768
689
534
382
1.45
2.03
2.28
2.56
2.81
3.25
3.95
4.43
1.45
2.01
2.26
2.49
3.25
4.48
1.45
2.05
2.28
2.54
3.28
4.59
528
742
832
934
1027
1186
1444
1618
530
735
826
908
1186
1637
529
750
833
927
1198
1673
1.62
1.54
1.50
1.45
1.59
1.34
1.33
1.25
2.12
2.12
2.12
2.12
2.12
2.12
3.29
3.29
3.29
3.29
3.08
3.29
710
771
791
813
854
840
867
863
957
1048
1083
1110
1189
1248
2377
2673
2754
2844
3095
3369
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
06UCBN2A1.4A_D
1.8
2.2
2.5
2.8
3.2
4.0
4.5
07UCBN2A1.4A_D
1.8
2.2
2.5
3.2
4.5
08UCBN2A1.4A_D
1.8
2.2
2.5
3.2
4.5
Part No.
4740233
4740236
4740239
4740242
4740245
4740248
4740254
4769131
4740350
4740354
4740358
4740362
4740370
4769139
4740500
4740504
4740508
4740512
4740520
4769147
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
06UCFN2A1.4A_D
1.8
2.2
2.5
...
3.2
...
4.5
07UCFN2A1.4A_D
1.8
2.2
2.5
3.2
4.5
08UCFN2A1.4A_D
1.8
2.2
2.5
3.2
4.5
Part No.
4741052
4741055
4741058
4741061
...
4741067
...
4769134
4741169
4741173
4741177
4741181
4741189
4769144
4741319
4741323
4741327
4741331
4741339
4769151
Motors are available from the
Factory or Distributors.
10 HP/215TC Motor Part No.
1940403 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz, NEMA B, 1.15
Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
15 HP/1750 rpm/254TC Frame Motor
Approx.
Output
rpm
Exact
Ratio
Actual
Output
Torque
(lb-in)
Service
Factor
Overhung
Load
(lb)
1207
871
774
703
538
1207
854
768
689
534
382
1.45
2.01
2.26
2.49
3.25
1.45
2.05
2.28
2.54
3.28
4.59
780
1081
1214
1335
1744
778
1103
1225
1363
1762
2460
1.41
1.41
1.41
1.41
1.41
2.19
2.19
2.19
2.19
2.05
2.19
924
1003
1031
1054
1116
2357
2640
2714
2804
3042
3303
22 (281-110)
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
07UCBN2A1.4A_E
1.8
2.2
2.5
3.2
08UCBN2A1.4A_E
1.8
2.2
2.5
3.2
4.5
Part No.
4740351
4740355
4740359
4740363
4740371
4740501
4740505
4740509
4740513
4740521
4769148
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
07UCFN2A1.4A_E
1.8
2.2
2.5
3.2
08UCFN2A1.4A_E
1.8
2.2
2.5
3.2
4.5
Part No.
4741170
4741174
4741178
4741182
4741190
4741320
4741324
4741328
4741332
4741340
4769152
Motors are available from the
Factory or Distributors.
15 HP/254TC Motor Part No.
1940404 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460
Volts, 3 Phase, 60 Hz, NEMA
B, 1.15 Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
©Rexnord, 1998, 2013
UC — Low Ratio Gearmotor Selection Table
20 HP/1750 rpm/256TC Frame Motor
Approx.
Output
rpm
Exact
Ratio
Actual
Output
Torque
(lb-in)
Service
Factor
Overhung
Load
(lb)
1207
871
774
703
538
1207
854
768
689
534
382
1.45
2.01
2.26
2.49
3.25
1.45
2.05
2.28
2.54
3.28
4.59
1040
1441
1619
1780
2325
1037
1470
1634
1817
2350
3280
1.06
1.06
1.06
1.06
1.06
1.65
1.65
1.65
1.65
1.54
1.65
892
957
980
998
1043
2337
2607
2675
2765
2989
3237
©Rexnord, 1998, 2013
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
07UCBN2A1.4A_E
1.8
2.2
2.5
3.2
08UCBN2A1.4A_E
1.8
2.2
2.5
3.2
4.5
Part No.
4740351
4740355
4740359
4740363
4740371
4740501
4740505
4740509
4740513
4740521
4769148
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
07UCFN2A1.4A_E
1.8
2.2
2.5
3.2
08UCFN2A1.4A_E
1.8
2.2
2.5
3.2
4.5
Part No.
4741170
4741174
4741178
4741182
4741190
4741320
4741324
4741328
4741332
4741340
4769152
Motors are available from the
Factory or Distributors.
20 HP/256TC Motor Part No.
1940405 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz, NEMA B, 1.15
Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
(281-110) 23
Type UC Low Ratio Double Reduction Gearmotor
Sizes 03 – 08 — Dimensions – Inches
Base Mounted
AB
K
S
R
N
X-CLEARANCE
LOW SPEED
SHAFT KEY
KO
U
BD
O
FP
D
G
J
4-HOLES FOR
H-DIA. BOLT
Q
E
F
A
SIZES 03 & 04
B
TAPPED HOLE
L - DIA. UNF
LA - DEPTH
AD
SIZE
«
03
04
06
07
08
A
B
5.31 4.33
5.71 6.30
7.48 7.87
9.06 9.65
11.42 12.20
D
2.95
3.54
4.53
5.51
7.09
E
F
4.33 3.35
4.33 5.12
5.31 6.50
6.69 8.07
8.46 10.24
G
H
J
L
LA
N
0.47
0.63
0.79
0.98
1.38
0.312
0.312
0.500
0.625
0.625
0.98
1.38
2.17
2.36
2.95
0.250
0.250
0.375
0.625
0.625
0.63
0.63
0.87
1.42
1.42
O
1.57 5.79
1.97 7.01
2.36 9.06
3.15 10.83
3.94 12.64
Q
R
S
2.28
2.95
3.54
4.53
5.51
3.07
3.31
4.13
5.12
6.50
2.83
2.95
3.86
4.69
5.79
U‡
0.7500
1.0000
1.2500
1.6250
2.1250
Low Speed Shaft
Key
.1875 x .1875 x 1.2812
.2500 x .2500 x 1.7500
.2500 x .2500 x 2.0000
.3750 x .3750 x 2.3750
.5000 x .5000 x 2.7500
X
...
...
...
...
1.61
‡‡ Sizes 03, 04 & 06 tolerance is +.0000, –.0005; Sizes 07 & 08 tolerance is +.0000, –.0010.
Typical NEMA Motor Dimensions «
Frame
Size
†
56C
143TC/145TC †
182TC/184TC †
213TC/215TC
254TC/256TC
All Sizes
AB
AD
BD
FP
5.25
5.25
5.88
7.38
8.94
6.69
6.69
9.02
...
...
6.50
6.50
9.00
9.00
9.13
7.19
7.19
8.50
10.19
12.50
KO
(Max)
12.00
12.06
15.44
16.31
19.63
Drive Size
03
K
(Max)
21.02
21.09
24.88
...
...
04
K
(Max)
21.92
21.98
25.79
...
...
06
K
(Max)
23.50
23.56
28.45
29.32
...
07
K
(Max)
26.29
26.35
30.53
31.41
34.73
08
K
(Max)
29.68
29.74
33.12
33.99
37.31
++ Refer to Page 4 for General Information and Reference Notes.
†† Motor and dimension AD project below the base of the drive.
24 (281-110)
©Rexnord, 1998, 2013
Type UC Low Ratio Double Reduction Gearmotor
Sizes 03 – 08 — Dimensions – Inches
Flange Mounted
K
AB
N
LOW SPEED
SHAFT KEY
X - CLEARANCE
KO
MA
U
A
BD
BB
FP
M
YA - BOLT CIRCLE
Y - QUANTITY
& DIA.
SIZES 03 & 04
Z
TAPPED HOLE
L - DIA. UNF
LA - DEPTH
G
NB
SIZE
«
03
04
06
07
08
A
BB l
G
L
LA
M
MA
N
NB
6.30
7.87
9.84
11.81
13.78
4.3307
5.1181
7.0866
9.0551
9.8425
0.28
0.47
0.47
0.55
0.63
0.250
0.250
0.375
0.625
0.625
0.63
0.63
0.87
1.42
1.42
3.15
3.74
4.45
5.43
7.36
2.76
3.46
4.53
5.43
4.93
1.57
1.97
2.36
3.15
3.94
1.57
1.97
2.36
3.15
3.94
AD
U‡
0.7500
1.0000
1.2500
1.6250
2.1250
Low Speed Shaft
Key
.1875 x .1875 x 1.2812
.2500 x .2500 x 1.7500
.2500 x .2500 x 2.0000
.3750 x .3750 x 2.3750
.5000 x .5000 x 2.7500
X
Y
YA
Z
...
...
...
...
1.61
4-0.39
4-0.47
4-0.59
4-0.59
4-0.71
5.12
6.50
8.46
10.43
11.81
0.14
0.14
0.16
0.16
0.20
zz Size 03, tolerance is +.0000, –.0021; Sizes 04 & 06 tolerance is +.0000, –.0025; Sizes 07 & 08 tolerance is +.0000, –.0028.
‡‡ Sizes 03, 04 & 06 tolerance is +.0000, –.0005; Sizes 07 & 08 tolerance is +.0000, –.0010.
Typical NEMA Motor Dimensions «
Frame
Size
†
56C
143TC/145TC †
182TC/184TC †
213TC/215TC
254TC/256TC
All Sizes
AB
AD
BD
FP
5.25
5.25
5.88
7.38
8.94
6.69
6.69
9.02
...
...
6.50
6.50
9.00
9.00
9.13
7.19
7.19
8.50
10.19
12.50
KO
(Max)
12.00
12.06
15.44
16.31
19.63
Drive Size
03
K
(Max)
21.02
21.09
24.88
...
...
04
K
(Max)
21.92
21.98
25.79
...
...
06
K
(Max)
23.50
23.56
28.45
29.32
...
07
K
(Max)
26.29
26.35
30.53
31.41
34.73
08
K
(Max)
29.68
29.74
33.12
33.99
37.31
++ Refer to Page 4 for General Information and Reference Notes.
†† Motor and dimension AD project below the base of the drive.
©Rexnord, 1998, 2013
(281-110) 25
UC — Low Ratio Overhung Loads
High & Low Speed Shaft
Overhung load is imposed upon a shaft when a pinion, sprocket or sheave is
used as a power take-off. The magnitude of the load varies with the type of
take-off and its proximity to the shaft bearing. Calculate the load and check the
result against the tabulated overhung load rating.
Overhung load formula:
Overhung Load = 126,000 x hp x Fc x Lf
Pitch Dia x rpm
Fc = Load Connection Factor.
Gearmotor Overhung Load Capacity — The overhung load capacity at the low
speed shaft is found in the Selection Tables on Pages 17 through 22.
Gear Drive Overhung Load Capacity — The overhung load capacity at the high
speed shaft and low speed shaft are found on Page 27.
Example:
Gear Drive Size = 04UCBN2A40.N_, exact ratio of 39.37:1.
Motor = .50 hp at 1750 rpm.
Low speed shaft rpm = 1750 ÷ 39.37 = 44.4 rpm.
3” diameter sprocket mounted on low speed shaft. Centerline of sprocket
overhung load is positioned at B = 0.98 inches. Calculate the overhung load as
follows:
Sprocket or Timing Belt. . . . . . . . . . . . . . . . . . . . . . . . . . 1.00
CENTER LINE
OF LOAD
Machined Pinion & Gear. . . . . . . . . . . . . . . . . . . . . . . . . 1.25
V-Belt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.50
HOUSING
OHL = 126,000 x 50 x 1.00 x 1.00 = 473 lb
3 x 44.4
Flat Belt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.50
Lf = Load Location Factor.
DISTANCE
Allowable OHL on Page 27 is 770 lb and is satisfactory for this selection.
For overhung loads applied at the
midpoint of the usable shaft
extension, L = 1.00
f
Locate the centerline of the load as close to the drive housing as practical to
minimize the overhung load and increase bearing life. The above overhung load
formula employs the transmitted horsepower, without Service Factor, providing
the overloads, starting loads, and brake capacities do not exceed the amounts
listed in Basic Information on Page 3.
Consult Factory for Higher Overhung Load Ratings — In many cases,
overhung load capacity in excess of that published is available. Published
ratings are based on a combination of the most unfavorable conditions of
rotation, speed, direction of applied load, and drive loading. If the actual load
should exceed the published capacity, refer full details to the Factory; provide
complete application information, as well as direction of rotation, location and
direction of applied load.
CENTERLINE
HSS
OVERHUNG LOAD
CENTERLINE
LSS
OVERHUNG LOAD
A
B
HIGH SPEED
SHAFT
LOW SPEED
SHAFT
Double Reduction Usable Shaft Extension
Drive Size
No. of Reductions
03
04
06
07
08
2
2
2
2
2
26 (281-110)
HSS
A (Inch)
0.79
0.79
0.79
0.98
1.18
LSS
B (Inch)
0.79
0.98
1.18
1.57
1.97
©Rexnord, 1998, 2013
UC – Low Ratio Gear Drive HSS Overhung Load Ratings/Pounds
Double Reduction
Consult Factory for higher overhung load ratings
Reduction
Ratio
Double
4.5
03
344
04
314
Drive Size †
06
310
07
402
08
648
†† Published ratings are based on a combination of the most unfavorable conditions of loading. For higher ratings, refer full data to the Factory.
UC – Low Ratio Gearmotor & Gear Drive LSS Overhung Load Ratings/Pounds
Double Reduction
Consult Factory for higher overhung load ratings
Approx.
L.S. Shaft rpm
03
1000
270
630
290
500
300
400
320
320
340
250
360
200
385
160
385
125
385
100
385
80
385
63
385
50
385
40
385
32
385
385
25 t
04
425
450
455
460
465
485
505
525
555
620
675
760
770
770
770
770
Drive Size
06
715
790
805
810
830
880
900
945
990
1010
1075
1270
1360
1515
1590
1600
07
950
1045
1065
1065
1065
1065
1065
1090
1130
1275
1425
1615
1720
1860
2060
2090
08
1820
1845
1845
1865
1890
1910
1910
1935
1980
2070
2745
2945
3505
4045
4990
4990
 The last overhung load value in each Drive Size column applies to all lower output speeds for that drive. Published ratings are based on a combination of the most unfavorable conditions of loading. For higher
ratings, refer full data to the Factory.
©Rexnord, 1998, 2013
(281-110) 27
UC – Low Ratio Gearmotor & Gear Drive LSS Thrust Loads/Pounds
Double Reduction
Axial Thrust Capacities/Inward or Outward
Thrust capacities tabulated refer to output shafts, and are calculated without any overhung loads being applied. In cases where combined axial thrusts and overhung
loads are to be applied, refer to the Factory.
Approx.
L.S. Shaft rpm
1000
630
500
400
320
250
200
160
125
100
80
63
50
40
32
25 t
03
390
390
390
390
390
390
390
390
390
390
390
390
390
390
390
390
04
635
635
635
635
635
635
635
635
635
635
635
635
635
635
635
635
Drive Size
06
1020
1200
1200
1200
1200
1200
1200
1200
1200
1270
1270
1270
1270
1270
1270
1270
07
1390
1580
1580
1580
1580
1580
1580
1580
1580
1620
1620
1620
1620
1620
1620
1620
08
1845
1845
1845
1845
1845
1845
1845
1845
1910
1910
1910
2405
2405
2405
2405
2405
 The last thrust capacity value in each Drive Size column applies to all lower output speeds for that drive.
UC — Low Ratio Gearmotor & Gear Drive Moments of Inertia
Double Reduction
WR2 (lb-in2) Referred to H.S. Shaft
Drive Size
Approx.
L.S. Shaft rpm
03
04
06
07
08
1.4
0.77
2.43
7.50
20.62
34.03
1.8
0.51
1.37
4.22
11.75
20.58
2.2
0.44
1.17
3.51
9.72
17.85
2.5
0.38
0.96
2.93
8.43
15.53
2.8
0.44
1.20
3.94
9.64
23.13
3.2
0.30
0.67
2.06
5.59
11.32
3.6
0.29
0.57
1.73
4.66
9.90
4.0
0.33
0.75
2.42
6.02
15.15
4.5
0.29
0.66
2.08
5.18
13.46
Values shown in the table above are referred to the drive high speed shaft. The WR2 referred to the low speed shaft equals the exact total ratio squared times the H.S.
shaft WR2.
28 (281-110)
©Rexnord, 1998, 2013
UC — Low Ratio Gear Drive Horsepower & Torque Ratings
3500 High Speed Shaft rpm/Double Reduction
(Torque is in pound-inches at low speed shaft)
Ratio
Code
Aprox.
L.S.Shaft
rpm
1.4
1.8
2.2
2.5
2.8
3.2
4.0
4.5
2500.00
1944.44
1590.91
1400.00
1250.00
1093.75
875.00
777.78
03
9.23
8.89
8.35
7.98
...
6.50
...
6.57
04
14.50
13.80
13.60
12.70
13.30
11.30
11.10
10.50
Horsepower
Drive Size
06
25.90
24.60
23.90
23.10
25.40
21.30
21.20
20.00
07
42.30
42.30
42.30
42.30
...
36.20
...
40.90
08
65.70
65.70
65.40
61.70
...
53.10
...
65.40
03
231
302
322
349
...
364
...
517
04
364
492
532
564
649
640
761
794
Torque
Drive Size
06
647
869
949
1030
1240
1210
1460
1540
07
1060
1480
1670
1840
...
2050
...
3200
08
1640
2340
2600
2730
...
3040
...
5210
Torque
Drive Size
06
737
988
1080
1170
1400
1370
1660
1750
07
1070
1490
1670
1840
...
2340
...
3310
08
1650
2350
2620
2920
...
3470
...
5260
Torque
Drive Size
06
820
1100
1200
1300
1560
1530
1840
1940
07
1070
1490
1680
1840
...
2410
...
3320
08
1650
2360
2630
2920
...
3790
...
5270
Input mechanical hp rating exceeds thermal hp capacity.
When selecting gear drives by hp method, check required hp (without service factor) against the thermal hp ratings on Page 31.
When selecting gear drives by torque method, convert required torque (without service factor) to hp and check against the thermal hp ratings on Page 31.
2400 High Speed Shaft rpm/Double Reduction
(Torque Is In Pound-Inches At Low Speed Shaft)
Ratio
Code
Aprox.
L.S. Shaft
rpm
1.4
1.8
2.2
2.5
2.8
3.2
4.0
4.5
1714.29
1333.33
1090.91
960.00
857.14
750.00
600.00
533.33
03
7.16
6.55
5.89
5.46
...
4.45
...
4.69
04
11.20
10.70
10.50
9.82
10.30
8.77
8.60
8.14
Horsepower
Drive Size
06
20.10
19.10
18.50
17.90
19.60
16.50
16.50
15.50
07
29.00
29.00
29.00
29.00
...
28.10
...
29.00
08
45.10
45.10
45.10
45.10
...
41.30
...
45.10
03
263
325
333
350
...
364
...
540
04
415
559
604
640
737
726
863
901
Input mechanical hp rating exceeds thermal hp capacity.
When selecting gear drives by hp method, check required hp (without service factor) against the thermal hp ratings on Page 31.
When selecting gear drives by torque method, convert required torque (without service factor) to hp and check against the thermal hp ratings on Page 31.
1750 High Speed Shaft rpm/Double Reduction
(Torque Is In Pound-Inches At Low Speed Shaft)
Ratio
Code
Aprox.
L.S. Shaft
rpm
1.4
1.8
2.2
2.5
2.8
3.2
4.0
4.5
1250.00
972.22
795.45
700.00
625.00
546.88
437.50
388.89
03
5.80
4.77
4.29
3.98
...
3.24
...
3.54
04
9.08
8.69
8.52
7.95
8.34
7.03
6.96
6.59
Horsepower
Drive Size
06
16.20
15.40
15.00
14.50
15.90
13.40
13.30
12.50
07
21.20
21.20
21.20
21.20
...
21.20
...
21.20
08
32.90
32.90
32.90
32.90
...
32.90
...
32.90
03
292
325
333
350
...
356
...
560
04
461
622
671
712
819
800
960
1000
Input mechanical hp rating exceeds thermal hp capacity.
When selecting gear drives by hp method, check required hp (without service factor) against the thermal hp ratings on Page 31.
When selecting gear drives by torque method, convert required torque (without service factor) to hp and check against the thermal hp ratings on Page 31.
©Rexnord, 1998, 2013
(281-110) 29
UC — Low Ratio Gear Drive Horsepower & Torque Ratings
1430 High Speed Shaft rpm/Double Reduction
(Torque is in pound-inches at low speed shaft)
Ratio
Code
Aprox.
L.S. Shaft
rpm
1.4
1.8
2.2
2.5
2.8
3.2
4.0
4.5
1021.43
794.44
650.00
572.00
510.71
446.88
357.50
317.78
03
4.82
3.95
3.56
3.30
...
2.69
...
3.00
04
8.00
7.66
7.51
7.01
7.35
5.83
6.13
5.81
Horsepower
Drive Size
06
14.30
13.60
13.20
12.80
14.00
11.80
11.70
11.00
07
17.50
17.50
17.50
17.50
...
17.50
...
17.50
08
27.20
27.20
27.20
27.20
...
27.20
...
27.20
03
293
325
333
350
...
365
...
573
04
492
662
715
758
873
800
1020
1070
Torque
Drive Size
06
874
1170
1280
1390
1660
1630
1960
2070
07
1070
1490
1680
1850
...
2410
...
3320
08
1660
2360
2630
2930
...
3790
...
5270
04
530
714
763
774
941
801
1100
1150
Torque
Drive Size
06
942
1260
1380
1480
1790
1700
2110
2230
07
1070
1490
1680
1850
...
2420
...
3320
08
1660
2370
2630
2930
...
3800
...
5280
04
565
743
763
774
1030
801
1170
1200
Torque
Drive Size
06
1040
1370
1480
1480
1970
1770
2320
2400
07
1080
1500
1680
1850
...
2420
...
3330
08
1670
2370
2640
2940
...
3800
...
5280
04
565
744
764
775
1090
801
1290
1330
Torque
Drive Size
06
1050
1370
1480
1480
2040
1830
2540
2640
07
1080
1500
1680
1850
...
2420
...
3330
08
1670
2380
2640
2940
...
3810
...
5290
1170 High Speed Shaft rpm/Double Reduction
(Torque Is In Pound-Inches at Low Speed Shaft)
Ratio
Code
Aprox.
L.S. Shaft
rpm
1.4
1.8
2.2
2.5
2.8
3.2
4.0
4.5
835.71
650.00
531.82
468.00
417.86
365.63
292.50
260.00
03
3.85
3.16
2.84
2.64
...
2.15
...
2.41
04
6.89
6.60
6.40
5.72
6.33
4.66
5.28
5.00
Horsepower
Drive Size
06
12.30
11.70
11.40
10.90
12.10
9.85
10.10
07
14.00
14.00
14.00
14.00
...
14.00
...
14.00
08
21.80
21.80
21.80
21.80
...
21.80
...
21.80
03
293
325
333
350
...
365
...
576
870 High Speed Shaft rpm/Double Reduction
(Torque Is In Pound-Inches at Low Speed Shaft)
Ratio
Code
Aprox.
L.S. Shaft
rpm
1.4
1.8
2.2
2.5
2.8
3.2
4.0
4.5
621.43
483.33
395.45
348.00
310.71
271.88
217.50
193.33
03
2.90
2.38
2.14
1.99
...
1.62
...
1.82
04
5.53
5.18
4.83
4.32
5.24
3.51
4.24
3.94
Horsepower
Drive Size
06
10.20
9.59
9.22
8.23
9.98
7.75
8.37
7.72
07
10.60
10.60
10.60
10.60
...
10.60
...
10.60
08
16.40
16.40
16.40
16.40
...
16.40
...
16.40
03
293
325
333
350
...
365
...
576
500 High Speed Shaft rpm/Double Reduction
(Torque Is In Pound-Inches at Low Speed Shaft)
Ratio
Code
Aprox.
L.S. Shaft
rpm
1.4
1.8
2.2
2.5
2.8
3.2
4.0
4.5
357.14
277.78
227.27
200.00
178.57
156.25
125.00
111.11
30 (281-110)
03
1.66
1.36
1.22
1.14
...
0.93
...
1.04
04
3.16
2.96
2.76
2.46
3.16
2.01
2.67
2.50
Horsepower
Drive Size
06
5.90
5.48
5.27
4.70
5.90
4.56
5.22
4.84
07
6.04
6.04
6.04
6.04
...
6.04
...
6.04
08
9.39
9.39
9.39
9.39
...
9.39
...
9.39
03
294
326
333
350
...
365
...
576
©Rexnord, 1998, 2013
UC — Low Ratio Gear Drive Part Numbers
Base Mounted
Double Reduction
Flange Mounted
Double Reduction
Drive
Size
Ratio
Code
Exact
Ratio
Drive
Designation
Drive
Part No.
Drive
Size
Ratio
Code
Exact
Ratio
Drive
Designation
Drive
Part No.
03
03
03
03
03
03
04
04
04
04
04
04
04
04
06
06
06
06
06
06
06
06
07
07
07
07
07
07
08
08
08
08
08
08
1.4
1.8
2.2
2.5
3.2
4.5
1.4
1.8
2.2
2.5
2.8
3.2
4.0
4.5
1.4
1.8
2.2
2.5
2.8
3.2
4.0
4.5
1.4
1.8
2.2
2.5
3.2
4.5
1.4
1.8
2.2
2.5
3.2
4.5
1.440
1.945
2.213
2.507
3.206
4.361
1.454
2.039
2.247
2.552
2.815
3.241
3.949
4.537
1.446
2.033
2.278
2.557
2.812
3.248
3.953
4.392
1.453
2.013
2.261
2.486
3.247
4.483
1.449
2.054
2.282
2.538
3.282
4.580
03UCBN2A1.4N_
03UCBN2A1.8N_
03UCBN2A2.2N_
03UCBN2A2.5N_
03UCBN2A3.2N_
03UCBN2A4.5N_
04UCBN2A1.4N_
04UCBN2A1.8N_
04UCBN2A2.2N_
04UCBN2A2.5N_
04UCBN2A2.8N_
04UCBN2A3.2N_
04UCBN2A4.0N_
04UCBN2A4.5N_
06UCBN2A1.4N_
06UCBN2A1.8N_
06UCBN2A2.2N_
06UCBN2A2.5N_
06UCBN2A2.8N_
06UCBN2A3.2N_
06UCBN2A4.0N_
06UCBN2A4.5N_
07UCBN2A1.4N_
07UCBN2A1.8N_
07UCBN2A2.2N_
07UCBN2A2.5N_
07UCBN2A3.2N_
07UCBN2A4.5N_
08UCBN2A1.4N_
08UCBN2A1.8N_
08UCBN2A2.2N_
08UCBN2A2.5N_
08UCBN2A3.2N_
08UCBN2A4.5N_
4740003
4740007
4740011
4740015
4740023
4769118
4740117
4740121
4740125
4740129
4740133
4740137
4740145
4769125
4740234
4740237
4740240
4740243
4740246
4740249
4740255
4769132
4740352
4740356
4740360
4740364
4740372
4769140
4740502
4740506
4740510
4740514
4740522
4769149
03
03
03
03
03
03
04
04
04
04
04
04
06
06
06
06
06
06
07
07
07
07
07
07
08
08
08
08
08
08
1.4
1.8
2.2
2.5
3.2
4.5
1.4
1.8
2.2
2.5
3.2
4.5
1.4
1.8
2.2
2.5
3.2
4.5
1.4
1.8
2.2
2.5
3.2
4.5
1.4
1.8
2.2
2.5
3.2
4.5
1.440
1.945
2.213
2.507
3.206
4.361
1.454
2.039
2.247
2.552
3.241
4.537
1.446
2.033
2.278
2.557
3.248
4.392
1.453
2.013
2.261
2.486
3.247
4.483
1.449
2.054
2.282
2.538
3.282
4.580
03UCFN2A1.4N_
03UCFN2A1.8N_
03UCFN2A2.2N_
03UCFN2A2.5N_
03UCFN2A3.2N_
03UCFN2A4.5N_
04UCFN2A1.4N_
04UCFN2A1.8N_
04UCFN2A2.2N_
04UCFN2A2.5N_
04UCFN2A3.2N_
04UCFN2A4.5N_
06UCFN2A1.4N_
06UCFN2A1.8N_
06UCFN2A2.2N_
06UCFN2A2.5N_
06UCFN2A3.2N_
06UCFN2A4.5N_
07UCFN2A1.4N_
07UCFN2A1.8N_
07UCFN2A2.2N_
07UCFN2A2.5N_
07UCFN2A3.2N_
07UCFN2A4.5N_
08UCFN2A1.4N_
08UCFN2A1.8N_
08UCFN2A2.2N_
08UCFN2A2.5N_
08UCFN2A3.2N_
08UCFN2A4.5N_
4740822
4740826
4740830
4740834
4740842
4769121
4740936
4740940
4740944
4740948
4740956
4769129
4741053
4741056
4741059
4741062
4741068
4769135
4741171
4741175
4741179
4741183
4741191
4769145
4741321
4741325
4741329
4741333
4741341
4769153
UC — Low Ratio Gear Drive Thermal Horsepower Ratings ‡
Drive Size
Overall
Ratios
High
SpeedShaft
rpm
03
04
06
07
08
1.4
to
5.6
3500
2400
1750
<1450
3.1
4.4
5.5
5.5
4.4
6.3
7.9
8.0
7.4
10.4
13.1
13.3
10.8
15.2
19.3
19.4
16.5
23.2
29.5
29.8
‡‡ Thermal hp ratings are based on standard horizontal (Mounting #1) position. For ratings in the other positions, consult the Factory.
©Rexnord, 1998, 2013
(281-110) 31
Type UC Low Ratio Double Reduction Gear Drive
Sizes 03 – 08 — Dimensions – Inches
Base Mounted
C
S
R
N
LOW SPEED
SHAFT KEY
X - CLEARANCE
HIGH SPEED
SHAFT KEY
NA
W - QUANTITY
& TAP
UA
U
O
D
G
J
4 - HOLES FOR
H - DIA. BOLT
Size
«
03
04
06
07
08
WA BOLT CIRCLE
TAPPED HOLE
L - DIA. UNF
LA - DEPTH
E
A
Q
TAPPED HOLE
LB - DIA. UNF
LC - DEPTH
P
F
B
A
B
C
D
E
F
G
H
J
L
LA
LB
LC
5.31
5.71
7.48
9.06
11.42
4.33
6.30
7.87
9.65
12.20
11.57
12.48
14.53
17.32
21.85
2.95
3.54
4.53
5.51
7.09
4.33
4.33
5.31
6.69
8.46
3.35
5.12
6.50
8.07
10.24
0.47
0.63
0.79
0.98
1.38
0.312
0.312
0.500
0.625
0.625
0.98
1.38
2.17
2.36
2.95
0.250
0.250
0.375
0.625
0.625
0.63
0.63
0.87
1.42
1.42
0.250
0.250
0.250
0.312
0.375
0.49
0.49
0.63
0.63
0.87
Low Speed Shaft
Size
«
N
NA
O
P
Q
R
S
03
04
06
07
08
1.57
1.97
2.36
3.15
3.94
1.57
1.57
1.57
1.97
2.36
5.79
7.01
9.06
10.83
12.64
5.94
4.41
4.49
4.72
6.10
2.28
2.95
3.54
4.53
5.51
3.07
3.31
4.13
5.12
6.50
2.83
2.95
3.86
4.69
5.79
U‡
Key
0.7500
1.0000
1.2500
1.6250
2.1250
.188 x .188 x 1.281
.250 x .250 x 1.750
.250 x .250 x 2.000
.375 x .375 x 2.375
.500 x .500 x 2.750
High Speed Shaft
UA
+.0000
Key
–.0005
0.6250
.188 x .188 x 1.281
0.6250
.188 x .188 x 1.281
0.7500
.188 x .188 x 1.281
0.8750
.188 x .188 x 1.281
1.1250
.250 x .250 x 2.000
W
WA
X
4 x M8
4 x M8
4 x M10
4 x M12
4 x M12
3.54
3.54
4.53
5.71
5.71
...
...
...
...
1.61
++ Refer to Page 4 for General Information and Reference Notes.
‡‡ Sizes 03, 04 & 06 tolerance is +.0000, –.0005; Sizes 07 & 08 tolerance is +.0000, –.0010.
32 (281-110)
©Rexnord, 1998, 2013
Type UC Low Ratio Double Reduction Gear Drive
Sizes 03 – 08 — Dimensions – Inches
Flange Mounted
C
LOW SPEED
SHAFT KEY
N
HIGH SPEED
SHAFT KEY
X - CLEARANCE
NA
UA
MA
U
A
W - QUANTITY
& TAP
BB
M
YA BOLT CIRCLE
Y - QUANTITY
& DIA.
Size
«
03
04
06
07
08
Z
G
TAPPED HOLE
L - DIA. UNF
LA - DEPTH
WA BOLT CIRCLE
TAPPED HOLE
LB - DIA. UNF
LC - DEPTH
NB
A
BB 
C
D
E
F
G
H
J
L
LA
LB
LC
6.30
7.87
9.84
11.81
13.78
4.3307
5.1181
7.0866
9.0551
9.8425
11.57
12.48
14.53
17.32
21.85
0.28
0.47
0.47
0.55
0.63
.250
.250
.375
.625
.625
0.63
0.63
0.87
1.42
1.42
.250
.250
.250
.312
.375
0.49
0.49
0.63
0.63
0.87
3.15
3.74
4.45
5.43
7.36
2.76
3.46
4.53
5.43
6.81
1.57
1.97
2.36
3.15
3.94
0.250
0.250
0.250
0.312
0.375
0.49
0.49
0.63
0.63
0.87
zz Size 03, tolerance is +.0000, –.0021; Sizes 04 & 06 tolerance is +.0000, –.0025; Sizes 07 & 08 tolerance is +.0000, –.0028.
Low Speed Shaft
Size
«
NA
NB
03
04
06
07
08
1.57
1.57
1.57
1.97
2.36
1.57
1.97
2.36
3.15
3.94
U‡
Key
0.7500
1.0000
1.2500
1.6250
2.1250
.188 x .188 x 1.281
.250 x .250 x 1.750
.250 x .250 x 2.375
.375 x .375 x 2.375
.500 x .500 x 2.750
High Speed Shaft
UA
+.0000
Key
–.0005
0.6250
0.6250
0.7500
0.8750
1.1250
.188 x .188 x 1.281
.188 x .188 x 1.281
.188 x .188 x 1.281
.188 x .188 x 1.281
.250 x .250 x 2.000
W
WA
X
Y
YA
Z
4 x M8
4 x M8
4 x M10
4 x M12
4 x M12
3.54
3.54
4.53
5.71
5.71
...
...
...
...
1.88
4 x 0.39
4 x 0.47
4 x 0.59
4 x 0.59
4 x 0.71
5.12
6.50
8.46
10.43
11.81
0.14
0.14
0.16
0.16
0.20
++ Refer to Page 4 for General Information and Reference Notes.
‡‡ Sizes 03, 04 & 06 tolerance is +.0000, –.0005; Sizes 07 & 08 tolerance is +.0000, –.0010.
©Rexnord, 1998, 2013
(281-110) 33
UC — Low Ratio Approximate Shipping Weights – lb t
56C
DRIVE
SIZE
03UC2
04UC2
06UC2
07UC2
08UC2
03UC2
04UC2
06UC2
07UC2
08UC2
143TC
145TC
Motor Frame Size
184TC
213TC
Gearmotor Without Motor
Flange Base Flange Base Flange
182TC
Base
Flange
Base
Flange
Base
Flange
Base
22
24
22
24
22
24
25
27
29
48
86
156
33
50
92
160
29
48
86
156
33
50
92
160
29
48
86
156
33
50
92
160
32
63
99
156
36
66
105
160
Base
47
54
73
111
181
Flange
49
58
75
117
185
Base
52
59
78
116
186
Flange
54
63
80
122
190
Base
62
69
88
126
196
Flange
64
73
90
132
200
Base
80
87
118
154
211
25
27
...
...
32
36
63
66
63
99
105
99
156
160
156
Gearmotor With Motor
Flange Base Flange Base
...
82
102
104
...
91
109
113
121
140
143
179
160
176
182
215
215
233
238
272
215TC
254TC
256TC
Base
Flange
Base
Flange
Base
Flange
...
...
...
...
...
...
66
105
160
63
99
156
66
105
160
...
...
...
...
...
...
...
...
...
...
...
...
99
156
105
160
99
156
105
160
Flange
Base
Flange
Base
Flange
Base
Flange
...
...
...
...
...
...
182
221
277
220
256
313
223
262
317
...
...
...
...
...
...
...
...
...
...
...
...
405
462
411
466
382
439
388
443
 All weights exclude lubricant.
DRIVE
SIZE
03UC2
04UC2
06UC2
07UC2
08UC2
34 (281-110)
Gear Drive
Base
19
25
49
92
148
Flange
22
29
51
99
153
©Rexnord, 1998, 2013
THIS PAGE INTENTIONALLY LEFT BLANK
©Rexnord, 1998, 2013
(281-110) 35
UC — Gearmotor Selection Table
0.25 HP/1750 rpm/56C Frame Motor
Approx.
Output
rpm
Exact
Ratio
Actual
Output
Torque
(lb-in)
460
341
299
264
207
192
152
134
117
105
96
87
74
62
53
48
40
35
30
30
27
24
21
17
42
37
32
30
27
25
21
18
15
14
11
10
8.7
32
30
27
25
21
18
15
14
11
10
8.7
7.3
6.6
3.75
5.07
5.76
6.53
8.35
9.00
11.36
12.88
14.71
16.37
18.05
19.86
23.27
27.92
32.54
36.16
43.54
49.91
56.72
58.46
64.45
70.93
83.10
99.70
41.49
47.09
53.54
57.03
62.87
69.19
81.07
97.26
113.37
125.97
151.69
173.87
197.60
53.54
57.03
62.87
69.19
81.07
97.26
113.37
125.97
151.69
173.87
197.60
234.96
261.37
33
44
50
57
73
79
99
114
130
143
159
175
204
245
285
316
381
437
496
502
556
611
715
858
364
413
469
495
546
600
702
842
981
1088
1312
1504
1705
470
494
546
601
703
843
982
1089
1315
1507
1706
1970
2187
36 (281-110)
Service Overhung
Load
Factor
(lb)
14.91
12.58
11.69
10.79
9.25
8.72
7.24
6.50
5.87
5.45
4.99
4.54
3.88
3.24
2.78
2.51
1.94
1.45
1.26
1.58
1.43
1.30
1.11
0.93
3.88
3.42
3.01
2.86
2.59
2.36
2.01
1.68
1.44
1.30
1.08
0.94
0.83
3.88
3.74
3.38
3.08
2.63
2.19
1.88
1.70
1.41
1.23
1.08
0.94
0.85
364
384
393
404
422
427
427
427
427
427
427
427
427
426
427
426
427
427
427
427
426
424
399
310
899
899
899
899
899
899
899
899
899
899
898
899
804
899
899
898
899
898
899
898
898
898
897
801
680
680
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
201UCBN2A3.6A_A
5.0
5.6
6.3
8.0
9.0
11.
12.
14.
16.
18.
20.
22.
28.
32.
36.
45.
50.
56.
201UCBN3A56.A_A
63.
71.
80.
100
202UCBN2A45.A_A
50.
56.
202UCBN3A56.A_A
63.
71.
80.
100
112
125
160
180
200
203UCBN2A56.A_A
203UCBN3A56.A_A
63.
71.
80.
100
112
125
160
180
200
203UCBN4A225A_A
250
Part No.
4767169
4767173
4767177
4767181
4767185
4767189
4767193
4767193
4767199
4767202
4767205
4767208
4767211
4767214
4767217
4767220
4767223
4767226
4767229
4768344
4768347
4768350
4768353
4768356
4767289
4767292
4767295
4768374
4768377
4768380
4768383
4768386
4768389
4768392
4768395
4768398
4768401
4767361
4768404
4768407
4768410
4768413
4768416
4768419
4768422
4768425
4768428
4768431
4768888
4768889
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
201UCFN2A3.6A_A
5.0
5.6
6.3
8.0
9.0
11.
12.
14.
16.
18.
20.
22.
28.
32.
36.
45.
50.
56.
201UCFN3A56.A_A
63.
71.
80.
100
202UCFN2A45.A_A
50.
56.
202UCFN3A56.A_A
63.
71.
80.
100
112
125
160
180
200
203UCFN2A56.A_A
203UCFN3A56.A_A
63.
71.
80.
100
112
125
160
180
200
203UCFN4A225A_A
250
Part No.
4767756
4767760
4767764
4767768
4767772
4767776
4767780
4767783
4767786
4767789
4767792
4767795
4767798
4767801
4767804
4767807
4767810
4767813
4767816
4768616
4768619
4768622
4768625
4768628
4767876
4767879
4767882
4768646
4768649
4768652
4768655
4768658
4768661
4768664
4768667
4768670
4768673
4767948
4768676
4768679
4768682
4768685
4768688
4768691
4768694
4768697
4768700
4768703
4768890
4768891
Motors are available from the
Factory or Distributors.
0.25 HP/56C Motor
Part No. 1940393
Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz, NEMA B,
1.15 Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
©Rexnord, 1998, 2013
UC — Gearmotor Selection Table
0.25 HP/1750 rpm/56C Frame Motor
Approx.
Output
rpm
Exact
Ratio
Actual
Output
Torque
(lb-in)
18
15
13
11
10
8.8
7.4
6.6
6.2
5.6
4.8
4.1
15
13
11
10
8.8
7.4
6.6
6.2
5.6
4.8
4.1
3.9
3.6
11
9.2
8.1
8.0
7.3
6.3
5.5
4.7
4.3
3.9
3.2
3.0
2.5
7.5
6.6
6.0
5.5
4.8
4.2
3.7
3.4
2.9
2.4
2.0
1.7
96.52
115.82
130.50
151.71
172.19
195.75
232.81
260.47
277.62
305.72
362.32
416.75
115.82
130.50
151.71
172.19
195.75
232.81
260.47
277.62
305.72
362.32
416.75
444.96
483.76
161.57
187.83
213.18
215.23
237.02
272.91
313.91
365.10
396.93
444.10
533.13
568.23
681.88
229.00
259.68
286.42
315.41
361.21
415.49
469.77
510.72
592.12
710.84
847.84
1017.41
839
1004
1131
1318
1492
1693
1959
2183
2325
2565
3024
3480
1007
1134
1319
1497
1696
1970
2197
2341
2581
3046
3504
3735
4061
1404
1634
1851
1833
2021
2317
2665
3097
3366
3758
4508
4805
5759
1950
2206
2432
2681
3065
3523
3975
4321
4995
5993
7123
8538
©Rexnord, 1998, 2013
Service Overhung
Load
Factor
(lb)
3.56
2.98
2.64
2.27
2.00
1.77
1.53
1.37
1.29
1.17
0.99
0.86
3.96
3.51
3.02
2.66
2.35
2.02
1.81
1.70
1.54
1.31
1.14
1.07
0.98
3.94
3.39
2.99
3.02
2.74
2.02
1.76
1.71
1.57
1.47
1.23
1.15
0.96
3.94
3.48
3.16
2.86
2.51
2.18
1.93
1.78
1.54
1.28
1.08
0.90
1618
1618
1618
1618
1618
1618
1601
1601
1601
1601
1601
1601
1618
1618
1618
1617
1618
1081
1081
1081
1081
1081
1081
1081
1081
1618
1618
1618
1618
1618
1618
1618
1618
1618
1618
1618
1618
1618
1051
1051
1051
1051
1051
1051
1051
1051
1051
1051
1050
1050
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
204UCBN3A100A_A
112
125
160
180
200
204UCBN4A225A_A
250
280
300
360
400
205UCBN3A112A_A
125
160
180
200
205UCBN4A225A_A
250
280
300
360
400
450
500
206UCBN3A160A_A
180
200
206UCBN4A225A_A
250
280
300
360
400
450
500
650
730
207UCBN4A225A_A
250
280
300
360
400
450
500
650
730
860
10C
Part No.
4768450
4768453
4768456
4768459
4768462
4768465
4768892
4768893
4768894
4768895
4768896
4768897
4768487
4768490
4768493
4768496
4768499
4768904
4768905
4768906
4768907
4768908
4768909
4768910
4768911
4768524
4768527
4768530
4768920
4768921
4768922
4768923
4768924
4768925
4768926
4768927
4768928
4768929
4768940
4768942
4768944
4768945
4768946
4768947
4768948
4768949
4768950
4768951
4768952
4768953
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
204UCFN3A100A_A
112
125
160
180
200
204UCFN4A225A_A
250
280
300
360
400
205UCFN3A112A_A
125
160
180
200
205UCFN4A225A_A
250
280
300
360
400
450
500
206UCFN3A160A_A
180
200
206UCFN4A225A_A
250
280
300
360
400
450
500
650
730
207UCFN4A225A_A
250
280
300
360
400
450
500
650
430
860
10C
Part No.
4768722
4768725
4768728
4768731
4768734
4768737
4768898
4768899
4768900
4768901
4768902
4768903
4768759
4768762
4768765
4768768
4768771
4768912
4768913
4768914
4768915
4768916
4768917
4768918
4768919
4768796
4768799
4768802
4768930
4768931
4768932
4768933
4768934
4768935
4768936
4768937
4768938
4768939
4768954
4768956
4768958
4768959
4768960
4768961
4768962
4768963
4768964
4768965
4768966
4768967
Motors are available from the
Factory or Distributors.
0.25 HP/56C Motor Part No.
1940393 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz, NEMA B,
1.15 Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
(281-110) 37
UC — Gearmotor Selection Table
0.33 HP/1750 rpm/56C Frame Motor
Approx.
Output
rpm
Exact
Ratio
Actual
Output
Torque
(lb-in)
460
341
299
264
207
192
152
134
117
105
96
87
74
62
53
48
40
35
30
30
27
24
21
54
48
42
37
32
30
27
25
21
18
15
14
11
42
37
32
30
27
25
21
18
15
14
11
10
8.7
3.75
5.07
5.76
6.53
8.35
9.00
11.36
12.88
14.71
16.37
18.05
19.86
23.27
27.92
32.54
36.16
43.54
49.91
56.72
58.46
64.45
70.93
83.10
31.68
35.69
41.49
47.09
53.54
57.03
62.87
69.19
81.07
97.26
113.37
125.97
151.69
41.49
47.09
53.54
57.03
62.87
69.19
81.07
97.26
113.37
125.97
151.69
173.87
197.6
43
58
67
76
97
104
131
150
171
189
210
231
270
323
376
418
503
576
655
663
734
806
944
367
413
481
546
620
653
721
792
927
1111
1294
1437
1732
480
546
620
653
721
793
929
1112
1297
1438
1736
1990
2252
38 (281-110)
Service Overhung
Load
Factor
(lb)
11.30
9.53
8.85
8.17
7.01
6.61
5.49
4.93
4.45
4.13
3.78
3.44
2.94
2.45
2.11
1.90
1.47
1.10
0.95
1.20
1.08
0.99
0.84
3.85
3.42
2.94
2.59
2.28
2.17
1.96
1.79
1.53
1.27
1.09
0.99
0.82
3.59
3.24
2.94
2.83
2.56
2.33
1.99
1.66
1.43
1.29
1.07
0.93
0.82
361
381
389
400
417
421
420
419
421
419
414
424
417
404
408
396
411
427
413
413
395
348
242
894
899
899
892
875
899
891
899
899
873
899
899
782
870
892
875
867
851
872
836
873
808
757
782
599
406
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
201UCBN2A3.6A_A
5.0
5.6
6.3
8.0
9.0
11.
12.
14.
16.
18.
20.
22.
28.
32.
36.
45.
50.
56.
201UCBN3A56.A_A
63.
71.
80.
202UCBN2A32.A_A
36.
45.
50.
56.
202UCBN3A56.A_A
63.
71.
80.
100
112
125
160
203UCBN2A45.A_A
50.
56.
203UCBN3A56.A_A
63.
71.
80.
100
112
125
160
180
200
Part No.
4767169
4767173
4767177
4767181
4767185
4767189
4767193
4767196
4767199
4767202
4767205
4767208
4767211
4767214
4767217
4767220
4767223
4767226
4767229
4768344
4768347
4768350
4768353
4767283
4767286
4767289
4767292
4767295
4768374
4768377
4768380
4768383
4768386
4768389
4768392
4768395
4767355
4767358
4767361
4767404
4767407
4767410
4767413
4767416
4767419
4767422
4767425
4767428
4767431
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
201UCFN2A3.6A_A
5.0
5.6
6.3
8.0
9.0
11.
12.
14.
16.
18.
20.
22.
28.
32.
36.
45.
50.
56.
201UCFN3A56.A_A
63.
71.
80.
202UCFN2A32.A_A
36.
45.
50.
56.
202UCFN3A56.A_A
63.
71.
80.
100
112
125
160
203UCFN2A45.A_A
50.
56.
203UCFN3A56.A_A
63.
71.
80.
100
112
125
160
180
200
Part No.
4767756
4767760
4767764
4767768
4767772
4767776
4767780
4767783
4767786
4767789
4767792
4767795
4767798
4767801
4767804
4767804
4767810
4767813
4767816
4768616
4768619
4768622
4768625
4767870
4767873
4767876
4767879
4767882
4768646
4768649
4768652
4768655
4768658
4768661
4768664
4768667
4767942
4767945
4767948
4768676
4768679
4768682
4768685
4768688
4768691
4768694
4768697
4768700
4768703
Motors are available
from the Factory or
Distributors.
0.33 HP/56C Motor
Part No. 1940394
Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz, NEMA B,
1.15 Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
©Rexnord, 1998, 2013
UC — Gearmotor Selection Table
0.33 HP/1750 rpm/56C Frame Motor
Approx.
Output
rpm
Exact
Ratio
Actual
Output
Torque
(lb-in)
Service
Factor
Overhung
Load
(lb)
27
23
21
18
15
13
11
10
8.8
7.4
6.6
6.2
5.6
18
15
13
11
10
8.8
7.4
6.6
6.2
5.6
4.8
4.1
12
11
9.2
8.1
8.0
7.3
6.3
5.5
4.7
4.3
3.9
3.2
3.0
7.5
6.6
6.0
5.5
4.8
4.2
3.7
3.4
2.9
2.4
2.0
64.29
73.95
80.40
96.52
115.82
130.50
151.71
172.19
195.75
232.81
260.47
277.62
305.72
96.52
115.82
130.50
151.71
172.19
195.75
232.81
260.47
277.62
305.72
362.32
416.75
143.39
161.57
187.83
213.18
215.23
237.02
272.91
313.91
365.10
396.93
444.10
533.13
568.23
229.00
259.68
286.42
315.41
361.21
415.49
469.77
510.72
592.12
710.84
847.84
748
850
924
1108
1326
1493
1740
1970
2236
2586
2882
3069
3386
1109
1329
1497
1741
1976
2239
2601
2900
3090
3408
4021
4626
1646
1854
2157
2443
2420
2668
3059
3517
4088
4444
4960
5951
6343
2575
2912
3211
3540
4046
4651
5247
5703
6594
7911
9402
3.96
3.52
3.24
2.7
2.26
2.00
1.72
1.52
1.34
1.16
1.04
0.97
0.88
3.59
3.00
2.66
2.29
2.01
1.78
1.53
1.37
1.29
1.17
0.99
0.86
3.36
2.99
2.57
2.27
2.28
2.07
1.53
1.33
1.29
1.19
1.12
0.93
0.87
2.98
2.64
2.39
2.17
1.90
1.65
1.46
1.35
1.16
0.97
0.82
1618
1618
1618
1613
1618
1610
1618
1618
1602
1601
1601
1601
1601
1598
1561
1533
1538
1494
1553
1081
1081
1081
1081
1081
1081
1618
1618
1618
1618
1618
1618
1618
1618
1618
1618
1618
1618
1618
1051
1051
1051
1051
1051
1051
1051
1051
1051
1051
1050
©Rexnord, 1998, 2013
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
204UCBN3A63.A_A
71.
80.
100
112
125
160
180
200
204UCBN4A225A_A
250
280
300
205UCBN3A100A_A
112
125
160
180
200
205UCBN4A225A_A
250
280
300
360
400
206UCBN3A125A_A
160
180
200
206UCBN4A225A_A
250
280
300
360
400
450
500
650
207UCBN4A225A_A
250
280
300
360
400
450
500
650
730
860
Part No.
4768438
4768442
4768446
4768450
4768453
4768456
4768457
4768462
4768465
4768892
4768893
4768894
4768895
4768484
4768487
4768490
4768493
4768496
4768499
4768904
4768905
4768906
4768907
4768908
4768909
4768521
4768524
4768527
4768530
4768920
4768921
4768922
4768923
4768924
4768925
4768926
4768927
4768928
4768940
4768942
4768944
4768945
4768946
4768947
4768948
4768949
4768950
4768951
4768952
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
204UCFN3A63.A_A
71.
80.
100
112
125
160
180
200
204UCFN4A225A_A
250
280
300
205UCFN3A100A_A
112
125
160
180
200
205UCFN4A225A_A
250
280
300
360
400
206UCFN3A125A_A
160
180
200
206UCFN4A225A_A
250
280
300
360
400
450
500
650
207UCFN4A225A_A
250
280
300
360
400
450
500
650
730
860
Part No.
4768710
4768714
4768718
4768722
4768725
4768728
4768731
4768734
4768737
4768898
4768899
4768900
4768901
4768756
4768759
4768762
4768765
4768768
4768771
4768912
4768913
4768914
4768915
4768916
4768917
4768793
4768796
4768799
4768802
4768930
4768931
4768932
4768933
4768934
4768935
4768936
4768937
4768938
4768954
4768956
4768958
4768959
4768960
4768961
4768962
4768963
4768964
4768965
4768966
Motors are available
from the Factory or
Distributors.
0.33 HP/56C Motor
Part No. 1940394
Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz, NEMA B,
1.15 Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
(281-110) 39
UC — Gearmotor Selection Table
0.50 HP/1750 rpm/56C Frame Motor
Approx.
Output
rpm
Exact
Ratio
Actual
Output
Torque
(lb-in)
460
341
299
264
207
192
152
134
117
105
96
87
74
62
53
48
40
85
78
65
54
48
42
37
32
30
27
25
21
18
65
54
48
42
37
32
30
27
25
21
18
15
14
3.75
5.07
5.76
6.53
8.35
9.00
11.36
12.88
14.71
16.37
18.05
19.86
23.27
27.92
32.54
36.16
43.54
20.23
21.99
26.40
31.68
35.69
41.49
47.09
53.54
57.03
62.87
69.19
81.07
97.26
26.40
31.68
35.69
41.49
47.09
53.54
57.03
62.87
69.19
81.07
97.26
113.37
125.97
66
89
101
115
147
158
199
228
260
287
318
350
409
490
570
633
763
357
388
465
557
627
729
827
939
990
1093
1201
1405
1684
466
555
624
727
828
940
989
1093
1202
1407
1686
1965
2179
40 (281-110)
Service Overhung
Load
Factor
(lb)
7.46
6.29
5.84
5.39
4.63
4.36
3.62
3.25
2.93
2.72
2.49
2.27
1.94
1.62
1.39
1.25
0.97
3.97
3.65
3.04
2.54
2.26
1.94
1.71
1.51
1.43
1.30
1.18
1.01
0.84
3.97
3.33
2.96
2.37
2.14
1.94
1.87
1.69
1.54
1.31
1.10
0.94
0.85
356
373
381
390
405
408
406
402
408
402
388
419
397
356
368
332
379
892
886
899
884
899
899
879
825
899
876
899
899
818
869
831
854
809
879
825
800
750
815
704
818
616
458
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
201UCBN2A3.6A_A
5.0
5.6
6.3
8.0
9.0
11.
12.
14.
16.
18.
20.
22.
28.
32.
36.
45.
202UCBN2A20.A_A
22.
28.
32.
36.
45.
50.
56.
202UCBN3A56.A_A
63.
71.
80.
100
203UCBN2A28.A_A
32.
36.
45.
50.
56.
203UCBN3A56.A_A
63.
71.
80.
100
112
125
Part No.
4767169
4767173
4767177
4767181
4767185
4767189
4767193
4767196
4767199
4767202
4767205
4767208
4767211
4767214
4767217
4767220
4767223
4767274
4767277
4767280
4767283
4767286
4767289
4767292
4767295
4768374
4768377
4768380
4768383
4768386
4767346
4767349
4767352
4767355
4767358
4767361
4768404
4768407
4768410
4768413
4768416
4768419
4768422
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
201UCFN2A3.6A_A
5.0
5.6
6.3
8.0
9.0
11.
12.
14.
16.
18.
20.
22.
28.
32.
36.
45.
202UCFN2A20.A_A
22.
28.
32.
36.
45.
50.
56.
202UCFN3A56.A_A
63.
71.
80.
100
203UCFN2A28.A_A
32.
36.
45.
50.
56.
203UCFN3A56.A_A
63.
71.
80.
100
112
125
Part No.
4767756
4767760
4767764
4767768
4767772
4767776
4767780
4767783
4767786
4767789
4767792
4767795
4767798
4767801
4767804
4767807
4767810
4767861
4767864
4767867
4767870
4767873
4767876
4767879
4767882
4768646
4768649
4768652
4768655
4768658
4767933
4767936
4767939
4767942
4767945
4767948
4768676
4768679
4768682
4768685
4768688
4768691
4768694
Motors are available from the
Factory or Distributors.
0.50 HP/56C Motor Part No.
1940395 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz, NEMA B,
1.15 Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
©Rexnord, 1998, 2013
UC — Gearmotor Selection Table
0.50 HP/1750 rpm/56C Frame Motor
Approx.
Output
rpm
Exact
Ratio
Actual
Output
Torque
(lb-in)
30
27
23
21
18
15
13
11
10
8.8
30
27
23
21
18
15
13
11
10
8.8
7.4
6.6
6.2
22
19
17
14
12
11
9.2
8.1
8.0
7.3
6.3
5.5
4.7
7.5
6.6
6.0
5.5
4.8
4.2
3.7
3.4
58.38
64.29
73.95
80.40
96.52
115.82
130.50
151.71
172.19
195.75
58.38
64.29
73.95
80.40
96.52
115.82
130.50
151.71
172.19
195.75
232.81
260.47
277.62
79.60
91.56
99.54
119.50
143.39
161.57
187.83
213.18
215.23
237.02
272.91
313.91
365.10
229.00
259.68
286.42
315.41
361.21
415.49
469.77
510.72
1013
1122
1288
1400
1678
2009
2263
2637
2985
3387
1017
1124
1287
1407
1681
2014
2268
2638
2995
3393
3941
4394
4682
1392
1601
1732
2074
2494
2809
3269
3702
3667
4043
4635
5330
6195
3901
4412
4865
5363
6130
7047
7951
8642
©Rexnord, 1998, 2013
Service Overhung
Load
Factor
(lb)
2.83
2.64
2.32
2.14
1.78
1.49
1.32
1.13
1.00
0.88
3.91
3.54
3.09
2.83
2.37
1.98
1.76
1.51
1.33
1.17
1.01
0.91
0.85
3.78
3.41
3.20
2.67
2.22
1.97
1.69
1.50
1.51
1.37
1.01
0.88
0.85
1.97
1.74
1.58
1.43
1.25
1.09
0.97
0.89
1617
1609
1618
1618
1602
1617
1592
1618
1618
1566
1539
1508
1528
1493
1557
1440
1353
1370
1232
1416
1081
1081
1081
1618
1618
1618
1618
1618
1618
1618
1618
1618
1618
1618
1618
1618
1051
1051
1051
1051
1051
1051
1051
1051
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
204UCBN3A56.A_A
63.
71.
80.
100
112
125
160
180
200
205UCBN3A56.A_A
63.
71.
80.
100
112
125
160
180
200
205UCBN4A225A_A
250
280
206UCBN3A71.A_A
80.
100
112
125
160
180
200
206UCBN4A225A_A
250
280
300
360
207UCBN4A225A_A
250
280
300
360
400
450
500
Part No.
4768434
4768438
4768442
4768446
4768450
4768453
4768456
4768459
4768462
4768465
4768468
4768472
4768476
4768480
4768484
4768487
4768490
4768493
4768496
4768499
4768904
4768905
4768906
4768506
4768510
4768514
4768518
4768521
4768524
4768527
4768530
4768920
4768921
4768922
4768923
4768924
4768940
4768942
4768944
4768945
4768946
4768947
4768948
4768949
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
204UCFN3A56.A_A
63.
71.
80.
100
112
125
160
180
200
205UCFN3A56.A_A
63.
71.
80.
100
112
125
160
180
200
205UCFN4A225A_A
250
280
206UCFN3A71.A_A
80.
100
112
125
160
180
200
206UCFN4A225A_A
250
280
300
360
207UCFN4A225A_A
250
280
300
360
400
450
500
Part No.
4768706
4768710
4768714
4768718
4768722
4768725
4768728
4768731
4768734
4768737
4768740
4768744
4768748
4768752
4768756
4768759
4768762
4768765
4768768
4768771
4768912
4768913
4768914
4768778
4768782
4768786
4768790
4768793
4768796
4768799
4768802
4768930
4768931
4768932
4768933
4768934
4768954
4768956
4768958
4768959
4768960
4768961
4768962
4768963
Motors are available from the
Factory or Distributors.
0.50 HP/56C Motor Part No.
1940395 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz, NEMA B,
1.15 Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
(281-110) 41
UC — Gearmotor Selection Table
0.75 HP/1750 rpm/56C Frame Motor
Approx.
Output
rpm
Exact
Ratio
Actual
Output
Torque
(lb-in)
460
341
299
264
207
192
152
134
117
105
96
87
74
62
53
48
98
85
78
65
54
48
42
37
32
30
27
98
85
78
65
54
48
42
37
32
30
27
25
21
63
54
49
40
36
32
30
27
23
21
18
15
13
54
49
40
36
32
30
27
23
21
18
15
13
11
10
3.75
5.07
5.76
6.53
8.35
9.00
11.36
12.88
14.71
16.37
18.05
19.86
23.27
27.92
32.54
36.16
17.58
20.23
21.99
26.40
31.68
35.69
41.49
47.09
53.54
57.03
62.87
17.58
20.23
21.99
26.40
31.68
35.69
41.49
47.09
53.54
57.03
62.87
69.19
81.07
27.30
32.19
35.25
43.20
48.15
54.00
58.38
64.29
73.95
80.40
96.52
115.82
130.50
32.19
35.25
43.20
48.15
54.00
58.38
64.29
73.95
80.40
96.52
115.82
130.50
151.71
172.19
99
133
152
173
221
238
299
342
390
431
477
525
614
736
856
950
466
535
582
698
836
940
1094
1241
1409
1485
1639
466
535
583
699
832
937
1091
1243
1411
1484
1639
1803
2111
725
851
935
1137
1266
1422
1520
1683
1933
2100
2518
3014
3394
851
935
1137
1268
1422
1526
1686
1931
2111
2522
3021
3403
3957
4492
42 (281-110)
Service Overhung
Load
Factor
(lb)
4.97
4.19
3.90
3.60
3.08
2.91
2.41
2.17
1.96
1.82
1.66
1.51
1.29
1.08
0.93
0.84
2.94
2.64
2.43
2.03
1.69
1.51
1.29
1.14
1.00
0.95
0.86
3.74
3.40
3.17
2.64
2.22
1.97
1.58
1.42
1.29
1.25
1.13
1.03
0.88
3.84
3.35
3.08
2.59
2.36
1.68
1.89
1.76
1.55
1.42
1.19
0.99
0.88
3.35
3.08
2.59
2.38
1.68
2.61
2.36
2.06
1.89
1.58
1.32
1.17
1.01
0.89
348
363
369
377
387
389
386
376
389
377
350
412
367
286
310
238
899
885
873
899
870
899
899
860
752
899
854
899
885
873
840
763
809
719
860
752
702
602
732
510
1562
1567
1570
1604
1598
1618
1615
1599
1618
1618
1587
1616
1566
1558
1549
1470
1561
1597
1460
1397
1438
1367
1495
1263
1088
1123
846
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
201UCBN2A3.6A_A
5.0
5.6
6.3
8.0
9.0
11.
12.
14.
16.
18.
20.
22.
28.
32.
36.
202UCBN2A18.A_A
20.
22.
28.
32.
36.
45.
50.
56.
202UCBN3A56.A_A
63.
203UCBN2A18.A_A
20.
22.
28.
32.
36.
45.
50.
56.
203UCBN3A56.A_A
63.
71.
80.
204UCBN2A28.A_A
32.
36.
45.
50.
56.
204UCBN3A56.A_A
63.
71.
80.
100
112
125
205UCBN2A32.A_A
36.
45.
50.
56.
205UCBN3A56.A_A
63.
71.
80.
100
112
125
160
180
Part No.
4767169
4767173
4767177
4767181
4767185
4767189
4767193
4767196
4767199
4767202
4767205
4767208
4767211
4767214
4767217
4767220
4767271
4767274
4767277
4767280
4767283
4767286
4767289
4767292
4767295
4768374
4768377
4767337
4767340
4767343
4767346
4767349
4767352
4767355
4767358
4767361
4768404
4768407
4768410
4768413
4767409
4767413
4767417
4767421
4767425
4767429
4768434
4768438
4768442
4768446
4768450
4768453
4768456
4767482
4767486
4767490
4767494
4767498
4768468
4768472
4768476
4768480
4768484
4768487
4768490
4768493
4768496
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
201UCFN2A3.6A_A
5.0
5.6
6.3
8.0
9.0
11.
12.
14.
16.
18.
20.
22.
28.
32.
36.
202UCFN2A18.A_A
20.
22.
28.
32.
36.
45.
50.
56.
202UCFN3A56.A_A
63.
203UCFN2A18.A_A
20.
22.
28.
32.
36.
45.
50.
56.
203UCFN3A56.A_A
63.
71.
80.
204UCFN2A28.A_A
32.
36.
45.
50.
56.
204UCFN3A56.A_A
63.
71.
80.
100
112
125
205UCFN2A32.A_A
36.
45.
50.
56.
205UCFN3A56.A_A
63.
71.
80.
100
112
125
160
180
Part No.
4767756
4767760
4767764
4767768
4767772
4767776
4767780
4767783
4767786
4767789
4767792
4767795
4767798
4767801
4767804
4767807
4767858
4767861
4767864
4767867
4767870
4767873
4767876
4767879
4767882
4768646
4768649
4767924
4767927
4767930
4767933
4767936
4767939
4767942
4767945
4767948
4768676
4768679
4768682
4768685
4767996
4768000
4768004
4768008
4768012
4768016
4768706
4768710
4768714
4768718
4768722
4768725
4768728
4768069
4768073
4768077
4768081
4768085
4768740
4768744
4768748
4768752
4768756
4768759
4768762
4768765
4768768
Motors are available from the
Factory or Distributors.
0.75 HP/56C Motor Part No.
1940396 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz,NEMA B,
1.15 Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
©Rexnord, 1998, 2013
UC — Gearmotor Selection Table
0.75 HP/1750 rpm/56C Frame Motor
Approx.
Output
rpm
Exact
Ratio
Actual
Output
Torque
(lb-in)
32
29
27
24
22
19
17
14
12
11
9.2
8.1
8.0
7.3
32
27
23
22
17
15
14
11
10
8.9
7.5
6.6
6.0
5.5
4.8
11
10
8.6
7.5
6.7
5.7
5.1
4.8
4.1
3.6
3.4
2.8
7.5
6.7
5.7
5.1
4.8
4.1
3.7
3.4
2.8
2.3
2.0
1.7
1.5
4.3
3.9
3.4
3.0
2.5
2.1
1.7
1.5
1.4
1.1
1.0
53.49
59.61
66.86
72.28
79.60
91.56
99.54
119.5
143.39
161.57
187.83
213.18
215.23
237.02
53.96
62.83
74.47
79.51
98.66
116.34
127.39
156.12
174.01
195.15
229.00
259.68
286.42
315.41
361.21
160.45
175.21
201.75
228.91
258.98
301.21
337.01
359.19
425.69
480.51
513.04
621.92
231.06
258.09
300.18
335.85
357.95
424.23
471.32
503.22
624.45
736.35
882.06
1040.13
1148.27
398.71
443.06
500.94
580.78
692.72
828.21
987.84
1138.21
1246.47
1539.39
1685.80
1408
1567
1691
1893
2089
2401
2598
3112
3742
4213
4904
5554
5501
6065
1416
1642
1950
2077
2575
3048
3327
4073
4531
5053
5852
6619
7298
8045
9195
4184
4565
5237
5831
6588
7664
8566
9140
10831
12206
13031
15749
5958
6646
7728
8635
9212
10910
12104
12920
16014
18861
22507
26517
29265
10206
11324
12797
14826
17665
21049
25089
28833
31561
38707
42381
©Rexnord, 1998, 2013
Service Overhung
Load
Factor
(lb)
3.26
2.65
1.72
2.84
2.52
2.27
2.13
1.78
1.48
1.31
1.13
1.00
1.01
0.91
3.72
3.90
3.47
3.33
2.89
2.52
2.31
1.89
1.70
1.52
1.31
1.16
1.05
0.95
0.84
3.60
3.30
2.87
2.07
1.97
1.69
1.51
1.42
1.20
1.12
1.04
0.93
3.93
3.81
3.27
2.93
2.75
2.32
2.09
1.96
1.58
1.34
1.12
0.95
0.86
3.83
3.45
3.05
2.63
2.21
1.86
1.56
1.35
1.24
0.97
0.89
1618
1618
1618
1618
1618
1618
1618
1618
1618
1618
1618
1618
1618
1618
2215
2248
2248
2248
2248
2248
2248
2248
2248
2183
1051
1051
1051
1051
1051
4496
4496
4496
4252
4017
4017
4017
4017
4017
3775
3775
3407
5780
5609
5609
5609
5609
5609
5609
5609
5609
5609
5609
5609
5609
9347
9347
9347
9347
9347
9347
9347
9347
9347
9423
9423
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
206UCBN2A50.A_A
56.
63.
206UCBN3A63.AA
71.
80.
100
112
125
160
180
200
206UCBN4A225A_A
250
207UCBN2A56.A_A
207UCBN3A63.A_A
71.
80.
100
112
125
160
180
200
207UCBN4A225A_A
250
280
300
360
208UCBN3A160A_A
180
200
208UCBN4A225A_A
250
280
300
360
400
450
500
650
09UCBN4B225A_A
250
280
300
360
400
450
500
650
730
860
14C
11C
10UCBN4B400A_A
450
500
650
730
860
10C
11C
13C
15C
18C
Part No.
4767560
4767564
4767568
4768502
4768506
4768510
4768514
4768518
4768521
4768524
4768527
4768530
4768920
4768921
4767655
4768540
4768544
4768548
4768552
4768556
4768560
4768564
4768568
4768572
4768940
4768942
4768944
4768945
4768946
4768604
4768608
4768611
4768968
4768970
4768972
4768974
4768976
4768978
4768980
4768982
4768983
4769000
4769002
4769004
4769006
4769008
4769010
4769012
4769014
4769016
4769018
4769020
4769022
4769024
4769062
4769065
4769068
4769070
4769072
4769074
4769076
4769078
4769080
4769082
4769083
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
206UCFN2A50.A_A
56.
63.
206UCFN3A63.AA
71.
80.
100
112
125
160
180
200
206UCFN4A225A_A
250
207UCFN2A56.A_A
207UCFN3A63.A_A
71.
80.
100
112
125
160
180
200
207UCFN4A225A_A
250
280
300
360
208UCFN3A160A_A
180
200
208UCFN4A225A_A
250
280
300
360
400
450
500
650
09UCFN4B225A_A
250
280
300
360
400
450
500
650
730
860
10C
11C
10UCFN4B400A_A
450
500
650
730
860
10C
11C
13C
15C
18C
Part No.
4768147
4768151
4768155
4768774
4768778
4768782
4768786
4768790
4768793
4768796
4768799
4768802
4768930
4768931
4768242
4768812
4768816
4768820
4768824
4768828
4768832
4768836
4768840
4768844
4768954
4768956
4768958
4768959
4768960
4768876
4768880
4768884
4768984
4768986
4768988
4768990
4768992
4768994
4768996
4768998
4768999
4769026
4769028
4768030
4769032
4769034
4769036
4769038
4769040
4769042
4769044
4769046
4769048
4769050
4769094
4769097
4769100
4769102
4769104
4769106
4769108
4769110
4769112
4769114
4769115
Motors are available from the
Factory or Distributors.
0.75 HP/56C Motor Part No.
1940396 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz,NEMA B,
1.15 Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
(281-110) 43
UC — Gearmotor Selection Table
1.0 HP/1750 rpm/143TC Frame Motor
Approx.
Output
rpm
Exact
Ratio
Actual
Output
Torque
(lb-in)
460
341
299
264
207
192
152
134
117
105
96
87
74
62
190
155
139
123
108
98
85
78
65
54
48
42
37
155
139
123
108
98
85
78
65
54
48
42
37
32
30
27
84
78
63
54
49
40
36
32
30
27
23
21
18
54
49
40
36
32
30
27
23
21
18
15
13
3.75
5.07
5.76
6.53
8.35
9.00
11.36
12.88
14.71
16.37
18.05
19.86
23.27
27.92
9.09
11.15
12.37
14.05
15.97
17.58
20.23
21.99
26.40
31.68
35.69
41.49
47.09
11.15
12.37
14.05
15.97
17.58
20.23
21.99
26.40
31.68
35.69
41.49
47.09
53.54
57.03
62.87
20.61
22.00
27.30
32.19
35.25
43.20
48.15
54.00
58.38
64.29
73.95
80.40
96.52
32.19
35.25
43.20
48.15
54.00
58.38
64.29
73.95
80.40
96.52
115.82
130.50
132
178
203
231
294
317
399
456
520
575
636
700
819
981
321
395
438
497
563
621
714
776
931
1114
1254
1459
1655
395
438
496
564
622
714
777
932
1110
1249
1455
1657
1881
1979
2186
730
777
967
1134
1247
1516
1688
1896
2027
2245
2577
2800
3357
1134
1247
1516
1691
1896
2035
2248
2575
2815
3362
4028
4537
44 (281-110)
Service Overhung
Load
Factor
(lb)
3.73
3.15
2.92
2.70
2.31
2.18
1.81
1.63
1.47
1.36
1.25
1.13
0.97
0.81
3.74
3.16
2.91
2.62
2.42
2.21
1.98
1.82
1.52
1.27
1.13
0.97
0.86
3.81
3.56
3.27
3.04
2.80
2.55
2.38
1.98
1.67
1.48
1.19
1.07
0.97
0.93
0.85
3.64
3.45
2.88
2.51
2.31
1.94
1.77
1.26
1.41
1.32
1.16
1.07
0.89
2.51
2.31
1.94
1.78
1.26
1.96
1.77
1.55
1.41
1.18
0.99
0.88
340
353
357
363
370
371
366
351
370
353
312
404
337
215
880
853
837
819
899
899
878
860
899
856
899
899
840
782
837
819
899
899
878
860
810
695
764
629
840
679
604
454
1420
1466
1534
1542
1545
1597
1588
1618
1614
1590
1618
1618
1571
1528
1515
1396
1533
1587
1381
1287
1347
1242
1434
1086
823
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
201UCBN2A3.6A_B
5.0
5.6
6.3
8.0
9.0
11.
12.
14.
16.
18.
20.
22.
28.
202UCBN2A9.0A_B
11.
12.
14.
16.
18.
20.
22.
28.
32.
36.
45.
50.
203UCBN2A11.A_B
12.
14.
16.
18.
20.
22.
28.
32.
36.
45.
50.
56.
203UCBN3A56.A_B
63.
204UCBN2A20.A_B
22.
28.
32.
36.
45.
50.
56.
204UCBN3A56.A_B
63.
71.
80.
100
205UCBN2A32.A_B
36.
45.
50.
56.
205UCBN3A56.A_B
63.
71.
80.
100
112
125
Part No.
4767170
4767174
4767178
4767182
4767186
4767190
4767194
4767197
4767200
4767203
4767206
4767209
4767212
4767215
4767253
4767257
4767261
4767265
4767269
4767272
4767275
4767278
4767281
4767284
4767287
4767290
4767293
4767323
4767327
4767331
4767335
4767338
4767341
4767344
4767347
4767350
4767353
4767356
4767359
4767362
4768405
4768408
4767402
4767406
4767410
4767414
4767418
4767422
4767426
4767430
4768435
4768439
4768443
4768447
4768451
4767483
4767487
4767491
4767495
4767499
4768469
4768473
4768477
4768481
4768485
4768488
4768491
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
201UCFN2A3.6A_B
5.0
5.6
6.3
8.0
9.0
11.
12.
14.
16.
18.
20.
22.
28.
202UCFN2A9.0A_B
11.
12.
14.
16.
18.
20.
22.
28.
32.
36.
45.
50.
203UCFN2A11.A_B
12.
14.
16.
18.
20.
22.
28.
32.
36.
45.
50.
56.
203UCFN3A56.A_B
63.
204UCFN2A20.A_B
22.
28.
32.
36.
45.
50.
56.
204UCFN3A56.A_B
63.
71.
80.
100
205UCFN2A32.A_B
36.
45.
50.
56.
205UCFN3A56.A_B
63.
71.
80.
100
112
125
Part No.
4767757
4767761
4767765
4767769
4767773
4767777
4767781
4767784
4767787
4767790
4767793
4767796
4767799
4767802
4767840
4767844
4767848
4767852
4767856
4767859
4767862
4767865
4767868
4767871
4767874
4767877
4767880
4767910
4767914
4767918
4767922
4767925
4767928
4767931
4767934
4767937
4767940
4767943
4767946
4767949
4768677
4768680
4767989
4767993
4767997
4768001
4768005
4768009
4768013
4768017
4768707
4768711
4768715
4768719
4768823
4768070
4768074
4768078
4768082
4768086
4768741
4768745
4768749
4768753
4768757
4768760
4768763
Motors are available from the
Factory or Distributors.
1.0 HP/143TC Motor Part No.
1940397 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz,NEMA B,
1.15 Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
©Rexnord, 1998, 2013
UC — Gearmotor Selection Table
1.0 HP/1750 rpm/143TC Frame Motor
Approx.
Output
rpm
Exact
Ratio
Actual
Output
Torque
(lb-in)
43
40
32
29
27
24
22
19
17
14
12
11
9.2
36
32
29
27
23
22
17
15
14
11
10
8.8
7.5
6.6
14
13
11
10
8.6
7.5
6.7
5.7
5.1
4.8
4.1
3.6
11
7.5
6.7
5.7
5.1
4.8
4.1
3.7
3.4
2.8
2.3
2.0
5.5
5.0
4.3
3.9
3.4
3.0
2.5
2.1
1.7
1.5
1.4
39.86
43.64
53.49
59.61
66.86
72.28
79.60
91.56
99.54
119.50
143.39
161.57
187.83
48.56
53.96
58.95
62.83
74.47
79.51
98.66
116.34
127.39
156.12
174.01
195.15
229.00
259.68
119.19
130.92
160.45
175.21
201.75
228.91
258.98
301.21
337.01
359.19
425.69
480.51
160.29
231.06
258.09
300.18
335.85
357.95
424.23
471.32
503.22
624.45
736.35
882.06
315.65
348.16
398.71
443.06
500.94
580.78
692.72
828.21
987.84
1138.21
1246.47
1406
1540
1884
2097
1691
2524
2785
3202
3464
4149
4989
5618
6538
1704
1888
2054
2190
2600
2770
3433
4064
4436
5472
6087
6817
7803
8825
4139
4553
5579
6086
6983
7775
8785
10219
11421
12187
14441
16275
5568
7944
8862
10304
11513
12283
14547
16139
17226
21352
25148
30009
10769
11887
13608
15099
17062
19768
23553
28065
33452
38444
42081
©Rexnord, 1998, 2013
Service Overhung
Load
Factor
(lb)
3.94
3.60
2.43
1.98
1.32
2.13
1.89
1.71
1.60
1.34
1.11
0.99
0.85
3.64
2.79
3.07
2.92
2.60
2.50
2.17
1.89
1.73
1.40
1.26
1.13
0.98
0.87
3.64
3.30
2.70
2.47
2.15
1.55
1.47
1.27
1.13
1.06
0.90
0.84
3.93
2.95
2.85
2.45
2.20
2.06
1.74
1.57
1.47
1.18
1.01
0.84
3.63
3.29
2.87
2.59
2.29
1.98
1.66
1.39
1.17
1.02
0.93
1606
1618
1618
1618
1618
1618
1618
1618
1618
1618
1618
1618
1618
2229
2183
2248
2248
2248
2248
2248
2248
2248
1804
1677
1480
1051
1051
4496
4496
4496
4496
4496
4252
4017
4017
4017
4017
4017
3775
6658
5780
5609
5609
5609
5609
5609
5609
5609
5609
5609
5609
9347
9347
9347
9347
9347
9347
9347
9347
9347
9347
9347
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
Part No.
206UCBN2A36.A_B
4767553
45.
4767557
50.
4767561
56.
4767565
63.
4767569
206UCBN3A63.A_B
4768503
71.
4768507
80.
4768511
100
4768515
112
4768519
125
4768522
160
4768525
180
4768528
207UCBN2A50.A_B
4767651
56.
4767656
207UCBN3A56.A_B
4768537
63.
4768541
71.
4768545
80.
4768549
100
4768553
112
4768557
125
4768561
160
4768565
180
4768569
200
4768573
207UCBN4A225A_B
4768941
250
4768943
208UCBN3A112A_B
4768597
125
4768601
160
4768605
180
4768609
200
4768613
208UCBN4A225A_B
4768969
250
4768971
280
4768973
300
4768975
360
4768977
400
4768979
450
4768981
09UCBN3A160A_B
4741970
09UCBN4B225A_B
4769001
250
4769003
280
4769005
300
4769007
360
4769009
400
4769011
450
4769013
500
4769015
650
4769017
730
4769019
860
4769021
10UCBN4B300A_B
4769058
360
4769060
400
4769063
450
4769066
500
4769069
650
4769071
730
4769073
860
4769075
10C
4769077
11C
4769079
13C
4769081
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
Part No.
206UCFN2A36.A_B
4768140
45.
4768144
50.
4768148
56.
4768152
63.
4768156
206UCFN3A63.A_B
4768775
71.
4768779
80.
4768783
100
4768787
112
4768791
125
4768794
160
4768797
180
4768800
207UCFN2A50.A_B
4768238
56.
4768243
207UCFN3A56.A_B
4768809
63.
4768813
71.
4768817
80.
4768821
100
4768825
112
4768829
125
4768833
160
4768837
180
4768841
200
4768845
207UCFN4A225A_B
4768955
250
4768957
208UCFN3A112A_B
4768869
125
4768873
160
4768877
180
4768881
200
4768885
208UCFN4A225A_B
4768985
250
4768987
280
4768989
300
4768991
360
4768993
400
4768995
450
4768997
09UCFN3A160A_B
4742320
09UCFN4B225A_B
4769027
250
4769029
280
4769031
300
4769033
360
4769035
400
4769037
450
4769039
500
4769041
650
4769043
730
4769045
860
4769047
10UCFN4B300A_B
4769090
360
4769092
400
4769095
450
4769098
500
4769101
650
4769103
730
4769105
860
4769107
10C
4769109
11C
4769111
13C
4769113
Motors are available from the
Factory or Distributors.
1.0 HP/143TC Motor Part No.
1940397 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz, NEMA B,
1.15 Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
(281-110) 45
UC — Gearmotor Selection Table
1.5 HP/1750 rpm/145TC Frame Motor
Approx.
Output
rpm
Exact
Ratio
Actual
Output
Torque
(lb-in)
460
341
299
264
207
192
152
134
117
105
96
343
311
274
216
190
155
139
123
108
98
85
78
65
54
311
274
216
190
155
139
123
108
98
85
78
65
54
48
118
106
99
84
78
63
54
49
40
36
32
30
27
84
78
63
54
49
40
36
32
30
27
23
21
3.75
5.07
5.76
6.53
8.35
9.00
11.36
12.88
14.71
16.37
18.05
5.03
5.55
6.30
8.00
9.09
11.15
12.37
14.05
15.97
17.58
20.23
21.99
26.40
31.68
5.55
6.30
8.00
9.09
11.15
12.37
14.05
15.97
17.58
20.23
21.99
26.40
31.68
35.69
14.58
16.31
17.39
20.61
22.00
27.30
32.19
35.25
43.20
48.15
54.00
58.38
64.29
20.61
22.00
27.30
32.19
35.25
43.20
48.15
54.00
58.38
64.29
73.95
80.40
198
267
304
346
442
476
599
684
780
862
955
267
293
332
424
482
592
657
745
845
932
1071
1164
1397
1672
294
333
425
483
592
657
744
847
933
1071
1166
1399
1665
1874
774
865
922
1095
1165
1451
1702
1870
2275
2533
2845
3041
3367
1094
1167
1448
1702
1870
2275
2536
2845
3053
3372
3862
4223
46 (281-110)
Service Overhung
Load
Factor
(lb)
2.49
2.10
1.95
1.80
1.54
1.45
1.21
1.08
0.98
0.91
0.83
3.61
3.41
3.16
2.73
2.49
2.11
1.94
1.74
1.61
1.47
1.32
1.22
1.01
0.85
3.99
3.69
3.16
2.91
2.54
2.37
2.18
2.03
1.87
1.70
1.59
1.32
1.11
0.99
3.16
2.93
2.80
2.42
2.30
1.92
1.67
1.54
1.30
1.18
0.84
0.94
0.88
3.64
3.41
2.75
1.67
1.54
1.30
1.19
0.84
1.30
1.18
1.03
0.94
325
332
334
336
335
333
325
301
332
303
236
853
842
825
785
868
823
797
766
899
899
865
834
899
827
842
825
785
758
704
797
766
899
899
865
834
751
560
674
1276
1307
1329
1360
1416
1477
1491
1497
1583
1568
1618
1611
1571
1298
1302
1301
1468
1446
1249
1477
1566
1223
1067
1167
992
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
Part No.
201UCBN2A3.6A_B
4767170
5.0
4767174
5.6
4767178
6.3
4767182
8.0
4767186
9.0
4767190
11.
4767194
12.
4767197
14.
4767200
16.
4767203
18.
4767206
202UCBN2A5.0A_B
4767237
5.6
4767241
6.3
4767245
8.0
4767249
9.0
4767253
11.
4767257
12.
4767261
14.
4767265
16.
4767269
18.
4767272
20.
4767275
22.
4767278
28.
4767281
32.
4767284
203UCBN2A5.6A_B
4767307
6.3
4767311
8.0
4767315
9.0
4767319
11.
4767323
12.
4767327
14.
4767331
16.
4767335
18.
4767338
20.
4767341
22.
4767344
28.
4767347
32.
4767350
36.
4767353
204UCBN2A14.A_B
4767390
16.
4767394
18.
4767398
20.
4767402
22.
4767406
28.
4767410
32.
4767414
36.
4767418
45.
4767422
50.
4767426
56.
4767430
204UCBN3A56.A_B
4768435
63.
4768439
205UCBN2A20.A_B
4767471
22.
4767475
28.
4767479
32.
4767183
36.
4767487
45.
4767491
50.
4767495
56.
4767499
205UCBN3A56.A_B
4768469
63.
4768473
71.
4768477
80.
4768481
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
Part No.
201UCFN2A3.6A_B
4767757
5.0
4767761
5.6
4767765
6.3
4767769
8.0
4767773
9.0
4767777
11.
4767781
12.
4767784
14.
4767787
16.
4767790
18.
4767793
202UCFN2A5.0A_B
4767824
5.6
4767828
6.3
4767832
8.0
4767836
9.0
4767840
11.
4767844
12.
4767848
14.
4767852
16.
4767856
18.
4767859
20.
4767862
22.
4767865
28.
4767868
32.
4767871
203UCFN2A5.6A_B
4767894
6.3
4767898
8.0
4767902
9.0
4767906
11.
4767910
12.
4767914
14.
4767918
16.
4767922
18.
4767925
20.
4767928
22.
4767931
28.
4767934
32.
4767937
36.
4767940
204UCFN2A14.A_B
4767977
16.
4767981
18.
4767985
20.
4767989
22.
4767993
28.
4767997
32.
4768001
36.
4768005
45.
4768009
50.
4768013
56.
4768017
204UCFN3A56.A_B
4768707
63.
4768711
205UCFN2A20.A_B
4768058
22.
4768062
28.
4768066
32.
4768070
36.
4768074
45.
4768078
50.
4768082
56.
4768086
205UCFN3A56.A_B
4768741
63.
4768745
71.
4768749
80.
4768753
Motors are available from the
Factory or Distributors.
1.5 HP/145TC Motor Part No.
1940398 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz, NEMA B,
1.15 Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
©Rexnord, 1998, 2013
UC — Gearmotor Selection Table
1.5 HP/1750 rpm/145TC Frame Motor
Approx.
Output
rpm
Exact
Ratio
Actual
Output
Torque
(lb-in)
63
51
43
40
32
29
27
24
22
19
17
14
49
41
36
32
29
27
23
22
17
15
13
11
10
23
20
17
14
13
11
10
8.5
7.5
6.7
5.7
13
12
11
7.5
6.7
5.7
5.1
4.8
4.1
3.7
3.4
7.8
7.1
6.2
5.5
5.0
4.3
3.9
3.4
3.0
2.5
2.1
27.24
33.80
39.86
43.64
53.49
59.61
66.86
72.28
79.60
91.56
99.54
119.50
35.17
42.21
48.56
53.96
58.95
62.83
74.47
79.51
98.66
116.34
127.39
156.12
174.01
74.69
84.31
102.20
119.19
130.92
160.45
175.21
201.75
228.91
258.98
301.21
128.66
145.20
160.29
231.06
258.09
300.18
335.85
357.95
424.23
471.32
503.22
220.22
242.24
278.36
315.65
348.16
398.71
443.06
500.94
580.78
692.72
828.21
1448
1796
2109
2311
2827
3146
1691
3786
4178
4803
5196
6224
1861
2226
2556
2832
3082
3285
3900
4155
5189
6142
6705
8209
9130
3887
4390
5335
6208
6829
8369
9130
10554
11663
13177
15328
6742
7563
8352
11917
13293
15457
17270
18425
21820
24208
25840
11288
12416
14263
16154
17831
20413
22649
25594
29652
35330
42098
©Rexnord, 1998, 2013
Service Overhung
Load
Factor
(lb)
3.82
3.08
2.63
2.40
1.62
1.32
0.88
1.42
1.26
1.14
1.07
0.89
3.96
3.37
2.42
1.86
2.04
1.95
1.74
1.67
1.43
1.25
1.15
0.94
0.84
3.67
3.37
2.82
2.42
2.20
1.80
1.65
1.43
1.04
0.98
0.85
3.75
2.89
2.62
1.96
1.90
1.64
1.46
1.37
1.16
1.04
0.98
3.46
3.15
2.74
2.42
2.19
1.91
1.72
1.53
1.32
1.11
0.93
1618
1618
1598
1618
1618
1618
1618
1618
1618
1618
1618
1618
1972
2015
2211
2118
2248
2248
2248
2248
1757
1452
1262
913
530
4496
4496
4496
4496
4496
4496
4496
4023
4252
4017
4017
6639
6629
6618
5780
5609
5609
5609
5609
5609
5609
5609
9347
9347
9347
9347
9347
9347
9347
9347
9347
9347
9347
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
206UCBN2A28.A_B
32.
36.
45.
50.
56.
63.
206UCBN3A63.A_B
71.
80.
100
112
207UCBN2A36.A_B
45.
50.
56.
207UCBN3A56.A_B
63.
71.
80.
100
112
125
160
180
208UCBN3A71.A_B
80.
100
112
125
160
180
200
208UCBN4A225A_B
250
280
09UCBN3A125A_B
140
160
09UCBN4B225A_B
250
280
300
360
400
450
500
10UCBN4B225A_B
250
280
300
360
400
450
500
650
730
860
Part No.
4767545
4767549
4767553
4767557
4767561
4767565
4767569
4768503
4768507
4768511
4768515
4768517
4767641
4767646
4767651
4767656
4768537
4768541
4768545
4768549
4768553
4768557
4768561
4768565
4768569
4768585
4768589
4768593
4768597
4768601
4768605
4768609
4768613
4768969
4768971
4768973
4741962
4741966
4741970
4769001
4769003
4769005
4769007
4769009
4769011
4769013
4769015
4769052
4769054
4769056
4769058
4769060
4769063
4769066
4769069
4769071
4769073
4769075
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
206UCFN2A28.A_B
32.
36.
45.
50.
56.
63.
206UCFN3A63.A_B
71.
80.
100
112
207UCFN2A36.A_B
45.
50.
56.
207UCFN3A56.A_B
63.
71.
80.
100
112
125
160
180
208UCFN3A71.A_B
80.
100
112
125
160
180
200
208UCFN4A225A_B
250
280
09UCFN3A125A_B
140
160
09UCFN4B225A_B
250
280
300
360
400
450
500
10UCFN4B225A_B
250
280
300
360
400
450
500
650
730
860
Part No.
4768132
4768136
4768140
4768144
4768148
4768152
4768156
4768775
4768779
4768783
4768787
4768791
4768228
4768233
4768238
4768243
4768809
4768813
4768817
4768821
4768825
4768829
4768833
4768837
4768841
4768857
4768861
4768865
4768869
4768873
4768877
4768881
4768885
4768985
4768987
4768989
4723312
4723316
4723320
4769027
4769029
4769031
4769033
4769035
4769037
4769039
4769041
4769084
4769086
4769088
4769090
4769092
4769095
4769098
4769101
4769103
4769105
4769107
Motors are available from the
Factory or Distributors.
1.5 HP/145TC Motor Part No.
1940398 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz, NEMA B,
1.15 Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
(281-110) 47
UC — Gearmotor Selection Table
2.0 HP/1750 rpm/145TC Frame Motor
Approx.
Output
rpm
Exact
Ratio
Actual
Output
Torque
(lb-in)
460
341
299
264
207
192
152
134
481
343
311
274
216
190
155
139
123
108
98
85
78
481
343
311
274
216
190
155
139
123
108
98
85
78
65
54
138
118
106
99
84
78
63
54
49
40
36
118
106
99
84
78
63
54
49
40
36
30
27
3.75
5.07
5.76
6.53
8.35
9.00
11.36
12.88
3.59
5.03
5.55
6.30
8.00
9.09
11.15
12.37
14.05
15.97
17.58
20.23
21.99
3.59
5.03
5.55
6.30
8.00
9.09
11.15
12.37
14.05
15.97
17.58
20.23
21.99
26.40
31.68
12.54
14.58
16.31
17.39
20.61
22.00
27.30
32.19
35.25
43.20
48.15
14.58
16.31
17.39
20.61
22.00
27.30
32.19
35.25
43.20
48.15
58.38
64.29
264
357
406
462
589
634
799
912
253
356
391
443
565
643
790
876
994
1126
1242
1428
1552
253
356
393
444
566
645
790
876
992
1129
1244
1429
1554
1865
2221
888
1033
1154
1229
1460
1554
1934
2269
2494
3033
3377
1035
1156
1232
1459
1557
1931
2269
2494
3033
3382
4071
4497
48 (281-110)
Service Overhung
Load
Factor
(lb)
1.86
1.57
1.46
1.35
1.16
1.09
0.91
0.81
3.29
2.71
2.56
2.37
2.05
1.87
1.58
1.45
1.31
1.21
1.10
0.99
0.91
3.91
3.18
2.99
2.77
2.37
2.18
1.90
1.78
1.63
1.52
1.40
1.28
1.19
0.99
0.83
2.65
2.37
2.20
2.10
1.82
1.73
1.44
1.26
1.16
0.97
0.89
3.85
3.44
3.23
2.73
2.56
2.06
1.26
1.16
0.97
0.89
0.98
0.89
309
311
310
308
301
296
285
251
813
834
819
796
740
856
793
756
713
899
899
851
809
813
834
819
796
740
702
626
756
713
899
899
851
809
692
424
1218
1243
1269
1289
1300
1366
1421
1440
1448
1569
1548
1198
1222
1243
1235
1229
1185
1408
1377
1101
1420
1065
846
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
201UCBN2A3.6A_B
5.0
5.6
6.3
8.0
9.0
11.
12.
202UCBN2A3.6A_B
5.0
5.6
6.3
8.0
9.0
11.
12.
14.
16.
18.
20.
22.
203UCBN2A3.6A_B
5.0
5.6
6.3
8.0
9.0
11.
12.
14.
16.
18.
20.
22.
28.
32.
204UCBN2A12.A_B
14.
16.
18.
20.
22.
28.
32.
36.
45.
50.
205UCBN2A14.A_B
16.
18.
20.
22.
28.
32.
36.
45.
50.
205UCBN3A56.A_B
63.
Part No.
4767170
4767174
4767178
4767182
4767186
4767190
4767194
4767197
4767233
4767237
4767241
4767245
4767249
4767253
4767257
4767261
4767265
4767269
4767272
4767275
4767278
4767299
4767303
4767307
4767311
4767315
4767319
4767323
4767327
4767331
4767335
4767338
4767341
4767344
4767347
4767350
4767386
4767390
4767394
4767398
4767402
4767406
4767410
4767414
4767418
4767422
4767426
4767459
4767463
4767467
4767471
4767475
4767479
4767483
4767487
4767491
4767495
4768469
4768473
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
201UCFN2A3.6A_B
5.0
5.6
6.3
8.0
9.0
11.
12.
202UCFN2A3.6A_B
5.0
5.6
6.3
8.0
9.0
11.
12.
14.
16.
18.
20.
22.
203UCFN2A3.6A_B
5.0
5.6
6.3
8.0
9.0
11.
12.
14.
16.
18.
20.
22.
28.
32.
204UCFN2A12.A_B
14.
16.
18.
20.
22.
28.
32.
36.
45.
50.
205UCFN2A14.A_B
16.
18.
20.
22.
28.
32.
36.
45.
50.
205UCFN3A56.A_B
63.
Part No.
4767757
4767761
4767765
4767769
4767773
4767777
4767781
4767784
4767820
4767824
4767828
4767832
4767836
4767840
4767844
4767848
4767852
4767856
4767859
4767862
4767865
4767886
4767890
4767894
4767898
4767902
4767906
4767910
4767914
4767918
4767922
4767925
4767928
4767931
4767934
4767937
4767973
4767977
4767981
4767985
4767989
4767993
4767997
4768001
4768005
4768009
4768013
4768046
4768050
4768054
4768058
4768062
4768066
4768070
4768074
4768078
4768082
4768741
4768745
Motors are available from the
Factory or Distributors.
2.0 HP/145TC Motor Part No.
1940399 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz, NEMA B,
1.15 Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
©Rexnord, 1998, 2013
UC — Gearmotor Selection Table
2.0 HP/1750 rpm/145TC Frame Motor
Approx.
Output
rpm
Exact
Ratio
Actual
Output
Torque
(lb-in)
85
80
68
63
51
43
40
32
29
24
22
19
64
54
49
41
36
32
29
27
23
22
17
15
13
31
29
26
23
20
17
14
13
11
10
8.5
18
17
15
13
12
11
7.5
6.7
5.7
5.1
4.8
4.1
7.8
7.1
6.2
5.5
5.0
4.3
3.9
3.4
3.0
2.5
20.20
21.53
25.51
27.24
33.80
39.86
43.64
53.49
59.61
72.28
79.60
91.56
26.93
32.12
35.17
42.21
48.56
53.96
58.95
62.83
74.47
79.51
98.66
116.34
127.39
55.80
60.33
66.02
74.69
84.31
102.20
119.19
130.92
160.45
175.21
201.75
93.92
103.68
116.55
128.66
145.20
160.29
231.06
258.09
300.18
335.85
357.95
424.23
220.22
242.24
278.36
315.65
348.16
398.71
443.06
500.94
580.78
692.72
1432
1526
1810
1931
2395
2813
3081
3769
4195
5048
5571
6404
1899
2265
2481
2969
3408
3776
4140
4414
5239
5582
6919
8190
8940
3914
4177
4611
5182
5854
7114
8341
9175
11244
12266
14072
6559
7244
8148
8990
10084
11136
15889
17725
20609
23027
24566
29094
15051
16554
19018
21538
23775
27217
30198
34125
39536
47106
©Rexnord, 1998, 2013
Service Overhung
Load
Factor
(lb)
3.87
3.63
3.06
2.87
2.31
1.97
1.80
1.22
0.99
1.06
0.95
0.85
3.77
3.22
2.97
2.52
1.82
1.39
1.52
1.45
1.29
1.24
1.08
0.94
0.86
3.44
3.20
2.99
2.75
2.52
2.11
1.80
1.64
1.34
1.23
1.07
3.56
3.23
3.11
2.82
2.17
1.96
1.47
1.43
1.23
1.10
1.03
0.87
2.59
2.36
2.05
1.81
1.64
1.43
1.29
1.14
0.99
0.83
1618
1618
1618
1618
1618
1590
1618
1618
1618
1618
1618
1618
1893
1882
1835
1899
2192
2054
1987
1864
1583
1462
1430
921
604
4243
4496
4496
4496
4496
4496
3918
3722
3443
3130
3708
6646
6639
6631
6609
6594
6578
5780
5609
5609
5609
5609
5609
9347
9347
9347
9347
9347
9347
9347
9347
9347
9347
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
206UCBN2A18.A_B
20.
22.
28.
32.
36.
45.
50.
56.
206UCBN3A63.A_B
71.
80.
207UCBN2A28.A_B
32.
36.
45.
50.
56.
207UCBN3A56.A_B
63.
71.
80.
100
112
125
208UCBN2A56.A_B
208UCBN3A56.A_B
63.
71.
80.
100
112
125
160
180
200
09UCBN3A90.A_B
100
112
125
140
160
09UCBN4B225A_B
250
280
300
360
400
10UCBN4B225A_B
250
280
300
360
400
450
500
650
730
Part No.
4767533
4767537
4767541
4767545
4767549
4767553
4767557
4767561
4767565
4768503
4768507
4768511
4767631
4767636
4767641
4767646
4767651
4767656
4768537
4768541
4768545
4768549
4768553
4768557
4768561
4767751
4768577
4768581
4768585
4768589
4768593
4768597
4768601
4768605
4768609
4768613
4741950
4741954
4741958
4741962
4741966
4741970
4769001
4769003
4769005
4769007
4769009
4769011
4769052
4769054
4769056
4769058
4769060
4769063
4769066
4769069
4769071
4769073
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
206UCFN2A18.A_B
20.
22.
28.
32.
36.
45.
50.
56.
206UCFN3A63.A_B
71.
80.
207UCFN2A28.A_B
32.
36.
45.
50.
56.
207UCFN3A56.A_B
63.
71.
80.
100
112
125
208UCFN2A56.A_B
208UCFN3A56.A_B
63.
71.
80.
100
112
125
160
180
200
09UCFN3A90.A_B
100
112
125
140
160
09UCFN4B225A_B
250
280
300
360
400
10UCFN4B225A_B
250
280
300
360
400
450
500
650
730
Part No.
4768120
4768124
4768128
4768132
4768136
4768140
4768144
4768148
4768152
4768775
4768779
4768783
4768218
4768223
4768228
4768233
4768238
4768243
4768809
4768813
4768817
4768821
4768825
4768829
4768833
4768338
4768849
4768853
4768857
4768861
4768865
4768869
4768873
4768877
4768881
4768885
4742300
4742304
4742308
4742312
4742316
4742320
4769027
4769029
4769031
4769033
4769035
4769037
4769084
4769086
4769088
4769090
4769092
4769095
4769098
4769101
4769103
4769105
Motors are available from the
Factory or Distributors.
2.0 HP/145TC Motor Part No.
1940399 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz, NEMA B,
1.15 Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
(281-110) 49
UC — Gearmotor Selection Table
3.0 HP/1750 rpm/182TC Frame Motor
Approx.
Output
rpm
Exact
Ratio
460
341
299
264
481
343
311
274
216
190
155
139
123
481
343
311
274
216
190
155
139
123
488
342
305
272
214
189
158
138
118
106
99
84
78
63
54
158
138
118
106
99
84
78
63
54
128
111
96
85
80
68
63
51
43
40
32
106
96
84
74
64
54
49
41
36
32
3.75
5.07
5.76
6.53
3.59
5.03
5.55
6.30
8.00
9.09
11.15
12.37
14.05
3.59
5.03
5.55
6.30
8.00
9.09
11.15
12.37
14.05
3.59
5.04
5.65
6.34
8.05
9.13
10.89
12.54
14.58
16.31
17.39
20.61
22.00
27.30
32.19
10.89
12.54
14.58
16.31
17.39
20.61
22.00
27.30
32.19
13.48
15.52
18.05
20.20
21.53
25.51
27.24
33.80
39.86
43.64
53.49
16.26
17.94
20.54
23.23
26.93
32.12
35.17
42.21
48.56
53.96
50 (281-110)
Actual
Output
Torque
(lb-in)
396
535
609
693
379
534
586
665
848
965
1185
1314
1491
380
534
589
666
850
967
1185
1314
1488
393
535
599
674
855
970
1157
1332
1549
1731
1844
2191
2331
2902
3404
1160
1334
1553
1734
1848
2188
2335
2897
3404
1435
1654
1921
2149
2290
2715
2897
3592
4219
4622
5654
1725
1905
2179
2461
2849
3398
3722
4453
5113
5664
Service Overhung
Load
Factor
(lb)
1.24
1.05
0.97
0.90
2.19
1.81
1.71
1.58
1.37
1.25
1.05
0.97
0.87
2.60
2.12
2.00
1.85
1.58
1.45
1.27
1.19
1.09
4.45
3.68
3.45
3.23
2.80
2.60
2.31
1.77
1.58
1.47
1.40
1.21
1.15
0.96
0.84
3.43
2.82
2.56
2.30
2.15
1.82
1.71
1.37
0.84
3.72
2.82
2.75
2.58
2.42
2.04
1.91
1.54
1.31
1.20
0.81
3.93
3.59
3.21
2.87
2.52
2.15
1.98
1.68
1.21
0.93
278
269
263
254
790
797
774
737
649
831
733
674
607
790
797
774
737
649
589
470
674
607
981
1034
1049
1067
1103
1122
1144
1160
1176
1194
1209
1180
1266
1308
1338
1104
1118
1133
1151
1166
1111
1082
954
1288
1618
1618
1618
1618
1618
1618
1618
1618
1574
1618
1618
1900
1861
1799
1730
1656
1638
1559
1667
2156
1924
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
Part No.
201UCBN2A3.6A_C
4767171
5.0
4767175
5.6
4767179
6.3
4767183
202UCBN2A3.6A_C
4767234
5.0
4767238
5.6
4767242
6.3
4767246
8.0
4767250
9.0
4767254
11.
4767258
12.
4767262
14.
4767266
203UCBN2A3.6A_C
4767300
5.0
4767304
5.6
4767308
6.3
4767312
8.0
4767316
9.0
4767320
11.
4767324
12.
4767328
14.
4767332
204UCBN2A3.6A_C
4767364
5.0
4767367
5.6
4767370
6.3
4767373
8.0
4767376
9.0
4767379
11.
4767382
12.
4767387
14.
4767391
16.
4767395
18.
4767399
20.
4767403
22.
4767407
28.
4767411
32.
4767415
205UCBN2A11.A_C
4767451
12.
4767456
14.
4767460
16.
4767464
18.
4767468
20.
4767472
22.
4767476
28.
4767480
32.
4767484
206UCBN2A12.A_C
4767521
14.
4767526
16.
4767530
18.
4767534
20.
4767538
22.
4767542
28.
4767546
32.
4767550
36.
4767554
45.
4767558
50.
4767562
207UCBN2A16.A_C
4767612
18.
4767617
20.
4767622
22.
4767627
28.
4767632
32.
4767637
36.
4767642
45.
4767647
50.
4767652
56.
4767657
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
Part No.
201UCFN2A3.6A_C
4767758
5.0
4767762
5.6
4767766
6.3
4767770
202UCFN2A3.6A_C
4767821
5.0
4767825
5.6
4767829
6.3
4767833
8.0
4767837
9.0
4767841
11.
4767845
12.
4767849
14.
4767853
203UCFN2A3.6A_C
4767887
5.0
4767891
5.6
4767895
6.3
4767899
8.0
4767903
9.0
4767907
11.
4767911
12.
4767915
14.
4767919
204UCFN2A3.6A_C
4767951
5.0
4767954
5.6
4767957
6.3
4767960
8.0
4767963
9.0
4767966
11.
4767969
12.
4767974
14.
4767978
16.
4767982
18.
4767986
20.
4767990
22.
4767994
28.
4767998
32.
4768002
205UCFN2A11.A_C
4768038
12.
4768043
14.
4768047
16.
4768051
18.
4768055
20.
4768059
22.
4768063
28.
4768067
32.
47680714
206UCFN2A12.A_C
4768108
14.
4768113
16.
4768117
18.
4768121
20.
4768125
22.
4768129
28.
4768133
32.
4768137
36.
4768141
45.
4768145
50.
4768149
207UCFN2A16.A_C
4768200
18.
4768204
20.
4768209
22.
4768214
28.
4768219
32.
4768224
36.
4768229
45.
4768234
50.
4768239
56.
4768244
Motors are available from the
Factory or Distributors.
3.0 HP/182TC Motor Part No.
1940400 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz, NEMA B,
1.15 Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
©Rexnord, 1998, 2013
UC — Gearmotor Selection Table
3.0 HP/1750 rpm/182TC Frame Motor
Approx.
Output
rpm
Exact
Ratio
Actual
Output
Torque
(lb-in)
48
39
36
31
29
26
23
20
17
14
13
11
10
31
28
25
29
26
23
21
18
17
15
13
12
11
18
16
15
13
13
11
7.8
7.1
6.2
5.5
5.0
4.3
3.9
36.21
44.38
48.46
55.8
60.33
66.02
74.69
84.31
102.20
119.19
130.92
160.45
175.21
55.18
61.13
68.74
59.85
66.49
74.26
82.51
93.92
103.68
116.55
128.66
145.20
160.29
95.44
109.97
112.77
129.94
135.88
156.57
220.22
242.24
278.36
315.65
348.16
398.71
443.06
3839
4706
5130
5871
6266
6917
7774
8781
10671
12417
13659
16739
18260
5833
6468
7253
6275
6972
7778
8648
9838
10866
12223
13485
15126
16705
9990
11508
11795
13586
14139
16288
22577
24832
28527
32308
35662
40826
45298
©Rexnord, 1998, 2013
Service Overhung
Load
Factor
(lb)
3.69
3.08
2.85
2.29
2.13
2.00
1.83
1.68
1.41
1.21
1.10
0.90
0.82
3.08
3.38
3.01
3.44
3.20
3.11
2.89
2.37
2.15
2.07
1.88
1.45
1.31
3.34
2.90
3.31
2.87
2.60
2.26
1.73
1.57
1.37
1.21
1.10
0.96
0.86
4066
3933
3863
3991
4496
4496
4159
3906
3910
3340
2947
2600
2037
6654
6654
6632
6646
6634
6634
6621
6596
6584
6571
6549
6524
6497
11128
11061
11061
10993
10971
10881
9347
9347
9347
9347
9347
9347
9347
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
208UCBN2A36.A_C
45.
50.
56.
208UCBN3A56.A_C
63.
71.
80.
100
112
125
160
180
09UCBN2A56.A_C
63.
71.
09UCBN3A56.A_C
63.
71.
80.
90.
100
112
125
140
160
10UCBN3A90.A_C
100
112
125
140
160
10UCBN4B225A_C
250
280
300
360
400
450
Part No.
4767734
4767740
4767746
4767752
4768578
4768582
4768586
4768590
4768594
4768598
4768602
4768606
4768610
4740801
4740807
4740813
4741935
4741939
4741943
4741947
4741951
4741955
4741959
4741963
4741967
4741971
4763115
4763121
4763127
4763133
4763139
4763145
4769053
4769055
4769057
4769059
4769061
4769064
4769067
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
208UCFN2A36.A_C
45.
50.
56.
208UCFN3A56.A_C
63.
71.
80.
100
112
125
160
180
09UCFN2A56.A_C
63.
71.
09UCFN3A56.A_C
63.
71.
80.
90.
100
112
125
140
160
10UCFN3A90.A_C
100
112
125
140
160
10UCFN4B225A_C
250
280
300
360
400
450
Part No.
4768321
4768327
4768333
4768339
4768850
4768854
4768858
4768862
4768866
4768870
4768874
4768878
4768882
4741620
4741626
4741632
4742285
4742289
4742293
4742297
4742301
4742305
4742309
4742313
4742317
4742321
4763359
4763365
4763371
4763377
4763383
4763389
4769085
4769087
4769089
4769091
4769093
4769096
4769099
Motors are available from the
Factory or Distributors.
3.0 HP/182TC Motor Part No.
1940400 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz, NEMA B,
1.15 Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
(281-110) 51
UC — Gearmotor Selection Table
5.0 HP/1750 rpm/184TC Frame Motor
Approx.
Output
rpm
Exact
Ratio
Actual
Output
Torque
(lb-in)
481
343
311
274
216
481
342
305
272
214
189
158
138
118
106
484
342
305
272
214
189
158
138
118
106
99
84
78
391
276
247
220
173
153
128
111
96
85
80
68
63
51
472
341
303
276
211
186
152
138
120
106
96
84
74
64
54
49
41
3.59
5.03
5.55
6.3
8.0
3.58
5.04
5.65
6.34
8.05
9.13
10.89
12.54
14.58
16.31
3.58
5.04
5.65
6.34
8.05
9.13
10.89
12.54
14.58
16.31
17.39
20.61
22.00
4.44
6.24
6.99
7.85
9.97
11.30
13.48
15.52
18.05
20.20
21.53
25.51
27.24
33.80
3.68
5.09
5.72
6.29
8.22
9.34
11.35
12.48
14.34
16.26
17.94
20.54
23.23
26.93
32.12
35.17
42.21
634
890
982
1110
1417
629
893
999
1123
1426
1617
1929
2220
2583
2885
693
894
1006
1124
1434
1621
1933
2224
2588
2891
3080
3647
3892
860
1107
1246
1390
1773
2006
2391
2757
3202
3582
3817
4526
4828
5987
706
981
1104
1215
1596
1807
2011
2208
2540
2875
3175
3632
4102
4749
5664
6203
7423
52 (281-110)
Service Overhung
Load
Factor
(lb)
1.56
1.27
1.20
1.11
0.95
2.67
2.21
2.07
1.94
1.68
1.56
1.39
1.06
0.95
0.88
3.72
3.78
3.62
3.25
2.78
2.46
2.06
1.69
1.54
1.38
1.29
1.09
1.02
3.72
3.78
3.62
3.25
2.93
2.62
2.23
1.69
1.65
1.55
1.45
1.22
1.15
0.93
3.82
3.82
3.82
3.82
3.41
3.17
3.07
2.88
2.58
2.36
2.15
1.92
1.72
1.51
1.29
1.19
1.01
744
723
683
620
467
964
987
997
1010
1015
983
922
1045
1043
1045
921
950
961
973
968
939
884
1007
1005
1007
1011
861
789
1618
1618
1618
1618
1618
1618
1549
1618
1618
1618
1618
1618
1618
1618
1645
1708
1728
1753
1827
1861
1771
1740
1683
1622
1552
1439
1317
1183
1150
1008
1203
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
203UCBN2A3.6A_C
5.0
5.6
6.3
8.0
204UCBN2A3.6A_C
5.0
5.6
6.3
8.0
9.0
11.
12.
14.
16.
205UCBN2A3.6A_C
5.0
5.6
6.3
8.0
9.0
11.
12.
14.
16.
18.
20.
22.
206UCBN2A5.0A_C
5.6
6.3
8.0
9.0
11.
12.
14.
16.
18.
20.
22.
28.
32.
207UCBN2A3.6A_C
5.0
5.6
6.3
8.0
9.0
11.
12.
14.
16.
18.
20.
22.
28.
32.
36.
45.
Part No.
4767300
4767304
4767308
4767312
4767316
4767364
4767367
4767370
4767373
4767376
4767379
4767382
4767387
4767391
4767395
4767433
4767436
4767439
4767442
4767445
4767448
4767451
4767456
4767460
4767464
4767468
4767472
4767476
4767502
4767505
4767508
4767511
4767514
4767517
4767521
4767526
4767530
4767534
4767538
4767542
4767546
4767550
4767571
4767575
4767579
4767583
4767587
4767591
4767597
4767602
4767607
4767612
4767617
4767622
4767627
4767632
4767637
4767642
4767647
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
203UCFN2A3.6A_C
5.0
5.6
6.3
8.0
204UCFN2A3.6A_C
5.0
5.6
6.3
8.0
9.0
11.
12.
14.
16.
205UCFN2A3.6A_C
5.0
5.6
6.3
8.0
9.0
11.
12.
14.
16.
18.
20.
22.
206UCFN2A5.0A_C
5.6
6.3
8.0
9.0
11.
12.
14.
16.
18.
20.
22.
28.
32.
207UCFN2A3.6A_C
5.0
5.6
6.3
8.0
9.0
11.
12.
14.
16.
18.
20.
22.
28.
32.
36.
45.
Part No.
4767887
4767891
4767895
4767899
4767903
4767951
4767954
4767957
4767960
4767963
4767966
4767969
4767974
4767978
4767982
4768020
4768023
4768026
4768029
4768032
4768035
4768038
4768043
4768047
4768051
4768055
4768059
4768063
4768089
4768092
4768095
4768098
4768101
4768104
4768108
4768113
4768117
4768121
4768125
4768129
4768133
4768137
4768158
4768162
4768166
4768170
4768174
4768178
4768184
4768189
4768194
4768199
4768204
4768209
4768214
4768219
4768224
4768229
4768234
Motors are available from the
Factory or Distributors.
5.0 HP/184TC Motor Part No.
1940401 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz,NEMA B,
1.15 Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
©Rexnord, 1998, 2013
UC — Gearmotor Selection Table
5.0 HP/1750 rpm/184TC Frame Motor
Approx.
Output
rpm
Exact
Ratio
Actual
Output
Torque
(lb-in)
104
94
83
74
61
52
48
39
36
31
29
26
23
21
53
48
43
39
35
31
28
25
29
26
23
21
18
17
15
13
36
33
30
28
29
26
24
22
18
16
15
13
13
11
7.8
7.1
16.69
18.26
20.66
23.32
28.27
32.97
36.21
44.38
48.46
55.80
60.33
66.02
74.69
84.31
32.31
35.67
40.25
44.44
49.07
55.18
61.13
68.74
59.85
66.49
74.26
82.51
93.92
103.68
116.55
128.66
47.93
51.49
57.75
62.05
60.23
66.93
71.17
79.08
95.44
109.97
112.77
129.94
135.88
156.57
220.22
242.24
3222
3229
3647
4122
5021
5809
6399
7843
8550
9785
11416
12601
14162
15997
5746
6295
7128
7875
8655
9722
10781
12089
10459
11620
12963
14413
16397
18111
20371
22476
9229
9060
10165
10880
10517
11686
12422
13801
16650
19181
19659
22644
23565
27148
37628
41387
©Rexnord, 1998, 2013
Service Overhung
Load
Factor
(lb)
3.85
3.73
3.54
3.20
2.70
2.38
2.21
1.85
1.71
1.37
1.17
1.10
1.01
0.92
3.36
3.09
3.07
2.78
2.32
1.85
2.03
1.81
2.06
1.92
1.86
1.73
1.42
1.29
1.24
1.13
3.80
3.78
3.62
3.38
3.17
2.86
3.01
2.80
2.00
1.74
1.99
1.72
1.56
1.36
1.04
0.94
3798
3483
3462
3490
3564
3398
3636
3370
3230
3485
3302
3105
3596
2921
6117
6354
6572
6594
6553
6603
6590
6561
6586
6564
6564
6542
6497
6474
6452
6429
9554
9808
10177
10408
10296
10633
10851
10986
10839
10733
10733
10614
10591
10441
9347
9347
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
208UCBN2A16.A_C
18.
20.
22.
28.
32.
36.
45.
50.
56.
208UCBN3A56.A_C
63.
71.
80.
09UCBN2A32.A_C
36.
40.
45.
50.
56.
63.
71.
09UCBN3A56.A_C
63.
71.
80.
90.
100
112
125
10UCBN2A50.A_C
56.
63.
71.
10UCBN3A56.A_C
63.
71.
80.
90.
100
112
125
140
160
10UCBN4B225A_C
250
Part No.
4767698
4767704
4767710
4767716
4767722
4767728
4767734
4767740
4767746
4767752
4768578
4768582
4768586
4768590
4740771
4740777
4740783
4740789
4740795
4740801
4740807
4740813
4741935
4741939
4741943
4741947
4741951
4741955
4741959
4741963
4763067
4763073
4763079
4763085
4763091
4763097
4763103
4763109
4763115
4763121
4763127
4763133
4763139
4763145
4769053
4769055
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
208UCFN2A16.A_C
18.
20.
22.
28.
32.
36.
45.
50.
56.
208UCFN3A56.A_C
63.
71.
80.
09UCFN2A32.A_C
36.
40.
45.
50.
56.
63.
71.
09UCFN3A56.A_C
63.
71.
80.
90.
100
112
125
10UCFN2A50.A_C
56.
63.
71.
10UCFN3A56.A_C
63.
71.
80.
90.
100
112
125
140
160
10UCFN4B225A_C
250
Part No.
4768285
4768291
4768297
4768303
4768309
4768315
4768321
4768327
4768333
4768339
4768850
4768854
4768858
4768863
4741590
4741596
4741602
4741608
4741614
4741620
4741626
4741632
4742285
4742289
4742293
4742297
4742301
4742305
4742309
4742313
4763311
4763317
4763323
4763329
4763335
4763341
4763347
4763353
4763359
4763365
4763371
4763377
4763383
4763389
4769085
4769087
Motors are available from the
Factory or Distributors.
5.0 HP/184TC Motor Part No.
1940401 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz, NEMA B,
1.15 Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
(281-110) 53
UC — Gearmotor Selection Table
7.5 HP/1750 rpm/213TC Frame Motor
Approx.
Output
rpm
Exact
Ratio
Actual
Output
Torque
(lb-in)
481
342
305
272
214
189
158
481
342
305
272
214
189
158
389
276
247
220
173
153
128
469
339
301
274
210
185
152
138
120
106
96
84
74
64
54
50
133
115
103
94
83
74
61
52
48
39
36
31
66
60
53
48
43
39
35
31
28
25
47
40
36
33
30
28
29
26
24
22
18
16
15
13
13
3.58
5.04
5.65
6.34
8.05
9.13
10.89
3.58
5.04
5.65
6.34
8.05
9.13
10.89
4.44
6.24
6.99
7.85
9.97
11.30
13.48
3.68
5.09
5.72
6.29
8.22
9.34
11.35
12.48
14.34
16.26
17.94
20.54
23.23
26.93
32.12
35.17
12.92
15.04
16.69
18.26
20.66
23.32
28.27
32.97
36.21
44.38
48.46
55.80
26.04
28.74
32.31
35.67
40.25
44.44
49.07
55.18
61.13
68.74
37.06
42.70
47.93
51.49
57.75
62.05
60.23
66.93
71.17
79.08
95.44
109.97
112.77
129.94
135.88
944
1339
1498
1685
2139
2425
2894
952
1341
1510
1686
2152
2432
2900
1180
1661
1869
2086
2660
3010
3587
969
1347
1516
1668
2190
2480
3017
3312
3811
4313
4762
5449
6153
7123
8496
9198
3445
3993
4421
4843
5471
6183
7532
8714
9599
11765
12826
14678
6931
7648
8619
9442
10692
11813
12983
14583
16171
18134
9802
11305
12666
13590
15248
16320
15776
17529
18633
20702
24976
28771
29488
33966
35347
54 (281-110)
Service Overhung
Load
Factor
(lb)
1.78
1.47
1.38
1.29
1.12
1.04
0.92
2.71
2.52
2.41
2.17
1.85
1.64
1.37
2.71
2.52
2.41
2.17
1.96
1.75
1.49
2.78
2.78
2.78
2.78
2.49
2.31
2.04
1.92
1.72
1.57
1.43
1.28
1.15
1.01
0.86
0.80
3.31
3.01
2.80
2.49
2.36
2.13
1.80
1.58
1.48
1.23
1.14
0.92
3.38
3.07
2.24
2.06
2.04
1.85
1.55
1.23
1.35
1.21
3.67
3.23
2.77
2.52
2.41
2.26
2.11
1.90
2.01
1.87
1.34
1.16
1.32
1.15
1.04
923
930
932
937
905
809
644
889
894
898
903
849
761
609
1618
1618
1618
1618
1618
1618
1462
1620
1674
1690
1712
1773
1800
1591
1521
1397
1275
1166
990
800
591
540
299
3327
3308
3150
3103
3013
2961
2982
2712
3099
2666
2438
2854
5544
5655
5838
6119
6440
6491
6398
6538
6509
6472
8730
9121
9417
9619
9972
10184
10071
10380
10588
10695
10477
10323
10323
10140
10115
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
204UCBN2A3.6A_D
5.0
5.6
6.3
8.0
9.0
11.
205UCBN2A3.6A_D
5.0
5.6
6.3
8.0
9.0
11.
206UCBN2A5.0A_D
5.6
6.3
8.0
9.0
11.
12.
207UCBN2A3.6A_D
5.0
5.6
6.3
8.0
9.0
11.
12.
14.
16.
18.
20.
22.
28.
32.
36.
208UCBN2A12.A_D
14.
16.
18.
20.
22.
28.
32.
36.
45.
50.
56.
09UCBN2A25.A_D
28.
32.
36.
40.
45.
50.
56.
63.
71.
10UCBN2A40.A_D
45.
50.
56.
63.
71.
10UCBN3A56.A_D
63.
71.
80.
90.
100
112
125
140
Part No.
4767365
4767368
4767371
4767374
4767377
4767380
4767383
4767434
4767437
4767440
4767443
4767446
4767449
4767452
4767503
4767506
4767509
4767512
4767515
4767518
4767522
4767572
4767576
4767580
4767584
4767588
4767592
4767598
4767603
4767608
4767613
4767618
4767623
4767628
4767633
4767638
4767643
4767689
4767693
4767699
4767705
4767711
4767717
4767723
4767729
4767735
4767741
4767747
4767753
4740760
4740766
4740772
4740778
4740784
4740790
4740796
4740802
4740808
4740814
4763056
4763062
4763068
4763074
4763080
4763086
4763092
4763098
4763104
4763110
4763116
4763122
4763128
4763134
4763140
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
204UCFN2A3.6A_D
5.0
5.6
6.3
8.0
9.0
11.
205UCFN2A3.6A_D
5.0
5.6
6.3
8.0
9.0
11.
206UCFN2A5.0A_D
5.6
6.3
8.0
9.0
11.
12.
207UCFN2A3.6A_D
5.0
5.6
6.3
8.0
9.0
11.
12.
14.
16.
18.
20.
22.
28.
32.
36.
208UCFN2A12.A_D
14.
16.
18.
20.
22.
28.
32.
36.
45.
50.
56.
09UCFN2A25.A_D
28.
32.
36.
40.
45.
50.
56.
63.
71.
10UCFN2A40.A_D
45.
50.
56.
63.
71.
10UCFN3A56.A_D
63.
71.
80.
90.
100
112
125
140
Part No.
4767952
4767955
4767958
4767961
4767964
4767967
4767970
4768021
4768024
4768027
4768030
4768033
4768036
4768039
4768090
4768093
4768096
4768099
4768102
4768105
4768109
4768159
4768163
4768167
4768171
4768175
4768179
4768185
4768190
4768195
4768200
4768205
4768210
4768215
4768220
4768225
4768230
4768276
4768280
4768286
4768292
4768298
4768304
4768310
4768316
4768322
4768328
4768334
4768340
4741579
4741585
4741591
4741597
4741603
4741609
4741615
4741621
4741627
4741633
4763300
4763306
4763312
4763318
4763324
4763330
4763336
4763342
4763348
4763354
4763360
4763366
4763372
4763378
4763384
Motors are available from the
Factory or Distributors.
7.5 HP/213TC Motor Part No.
1940402 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz, NEMA B,
1.15 Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
©Rexnord, 1998, 2013
UC — Gearmotor Selection Table
10 HP/1750 rpm/215TC Frame Motor
Approx.
Output
rpm
Exact
Ratio
Actual
Output
Torque
(lb-in)
481
342
305
272
481
342
305
272
214
189
158
389
276
247
220
173
153
128
469
339
301
274
210
185
152
138
120
106
96
84
268
207
184
150
133
115
103
94
83
74
61
52
48
39
36
104
94
84
75
66
60
53
48
43
39
35
31
28
25
66
58
56
49
47
40
36
33
30
28
29
26
24
22
18
16
15
3.58
5.04
5.65
6.34
3.58
5.04
5.65
6.34
8.05
9.13
10.89
4.44
6.24
6.99
7.85
9.97
11.30
13.48
3.68
5.09
5.72
6.29
8.22
9.34
11.35
12.48
14.34
16.26
17.94
20.54
6.44
8.33
9.35
11.47
12.92
15.04
16.69
18.26
20.66
23.32
28.27
32.97
36.21
44.38
48.46
16.59
18.43
20.59
22.87
26.04
28.74
32.31
35.67
40.25
44.44
49.07
55.18
61.13
68.74
26.03
29.99
30.76
35.44
37.06
42.70
47.93
51.49
57.75
62.05
60.23
66.93
71.17
79.08
95.44
109.97
112.77
1259
1786
1998
2247
1269
1788
2013
2248
2869
3243
3867
1573
2214
2492
2781
3546
4013
4783
1292
1796
2021
2224
2920
3306
4023
4416
5081
5750
6350
7265
2277
2952
3319
4043
4594
5325
5895
6458
7295
8245
10043
11618
12799
15686
17101
5902
6545
7324
8134
9241
10197
11493
12590
14257
15750
17311
19445
21562
24178
9212
10606
10895
12511
13069
15074
16888
18120
20331
21760
21035
23372
24844
27603
33301
38362
39318
©Rexnord, 1998, 2013
Service Overhung
Load
Factor
(lb)
1.34
1.11
1.04
0.97
2.04
1.89
1.81
1.63
1.39
1.23
1.03
2.04
1.89
1.81
1.63
1.47
1.31
1.12
2.09
2.09
2.09
2.09
1.86
1.73
1.53
1.44
1.29
1.18
1.08
0.96
3.89
3.36
3.12
2.74
2.49
2.26
2.10
1.86
1.77
1.60
1.35
1.19
1.11
0.93
0.85
3.79
3.53
3.24
3.01
2.54
2.30
1.68
1.55
1.53
1.39
1.16
0.92
1.01
0.90
3.62
3.15
3.58
3.12
2.75
2.42
2.08
1.89
1.81
1.69
1.59
1.43
1.51
1.40
1.00
0.87
0.99
881
872
867
865
849
838
836
834
730
584
334
1618
1618
1618
1618
1618
1618
1375
1587
1569
1556
1550
1514
1484
1411
1301
1112
928
779
541
3152
3235
3210
3164
3102
3010
2822
2723
2564
2431
2400
2026
2562
1962
1647
4899
5095
4980
5174
5340
5399
5560
5884
6309
6388
6244
6474
6429
6384
7624
7841
7925
8473
8596
8967
9240
9431
9767
9959
9846
10127
10326
10405
10116
9913
9913
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
204UCBN2A3.6A_D
5.0
5.6
6.3
205UCBN2A3.6A_D
5.0
5.6
6.3
8.0
9.0
11.
206UCBN2A5.0A_D
5.6
6.3
8.0
9.0
11.
12.
207UCBN2A3.6A_D
5.0
5.6
6.3
8.0
9.0
11.
12.
14.
16.
18.
20.
208UCBN2A6.3A_D
8.0
9.0
11.
12.
14.
16.
18.
20.
22.
28.
32.
36.
45.
50.
09UCBN2A16.A_D
18.
20.
22.
25.
28.
32.
36.
40.
45.
50.
56.
63.
71.
10UCBN2A25.A_D
28.
32.
36.
40.
45.
50.
56.
63.
71.
10UCBN3A56.A_D
63.
71.
80.
90.
100
112
Part No.
4767365
4767368
4767371
4767374
4767434
4767437
4767440
4767443
4767446
4767449
4767452
4767503
4767506
4767509
4767512
4767515
4767518
4767522
4767572
4767576
4767580
4767584
4767588
4767592
4767598
4767603
4767608
4767613
4767618
4767623
4767673
4767677
4767681
4767685
4767689
4767693
4767699
4767705
4767711
4767717
4767723
4767729
4767735
4767741
4767747
4740736
4740742
4740748
4740754
4740760
4740766
4740772
4740778
4740784
4740790
4740796
4740802
4740808
4740814
4763032
4763038
4763044
4763050
4763056
4763062
4763068
4763074
4763080
4763086
4763092
4763098
4763104
4763110
4763116
4763122
4763128
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
204UCFN2A3.6A_D
5.0
5.6
6.3
205UCFN2A3.6A_D
5.0
5.6
6.3
8.0
9.0
11.
206UCFN2A5.0A_D
5.6
6.3
8.0
9.0
11.
12.
207UCFN2A3.6A_D
5.0
5.6
6.3
8.0
9.0
11.
12.
14.
16.
18.
20.
208UCFN2A6.3A_D
8.0
9.0
11.
12.
14.
16.
18.
20.
22.
28.
32.
36.
45.
50.
09UCFN2A16.A_D
18.
20.
22.
25.
28.
32.
36.
40.
45.
50.
56.
63.
71.
10UCFN2A25.A_D
28.
32.
36.
40.
45.
50.
56.
63.
71.
10UCFN3A56.A_D
63.
71.
80.
90.
100
112
Part No.
4767952
4767955
4767958
4767961
4768021
4768024
4768027
4768030
4768033
4768036
4768039
4768090
4768093
4768096
4768099
4768102
4768105
4768109
4768159
4768163
4768167
4768171
4768175
4768179
4768185
4768190
4768195
4768200
4768205
4768210
4768260
4768264
4768268
4768272
4768276
4768280
4768286
4768292
4768298
4768304
4768310
4768316
4768322
4768328
4768334
4741555
4741561
4741567
4741573
4741579
4741585
4741591
4741597
4741603
4741609
4741615
4741621
4741627
4741633
4763276
4763282
4763288
4763294
4763300
4763306
4763312
4763318
4763324
4763330
4763336
4763342
4763348
4763354
4763360
4763366
4763372
Motors are available from the
Factory or Distributors.
10 HP/215TC Motor Part No.
1940403 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz, NEMA B,
1.15 Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
(281-110) 55
UC — Gearmotor Selection Table
15 HP/1750 rpm/254TC Frame Motor
Approx.
Output
rpm
Exact
Ratio
Actual
Output
Torque
(lb-in)
479
345
308
280
214
188
479
338
304
273
211
188
153
136
117
105
96
85
75
62
53
192
171
150
138
121
106
95
85
77
68
61
54
49
44
40
107
96
91
82
68
59
57
50
47
41
37
34
30
28
29
26
25
22
3.68
5.09
5.72
6.29
8.22
9.34
3.68
5.21
5.79
6.44
8.33
9.35
11.47
12.92
15.04
16.69
18.26
20.66
23.32
28.27
32.97
9.19
10.27
11.71
12.74
14.53
16.59
18.43
20.59
22.87
26.04
28.74
32.31
35.67
40.25
44.44
16.43
18.25
19.41
21.57
26.03
29.99
30.76
35.44
37.06
42.70
47.93
51.49
57.75
62.05
60.23
66.93
71.17
79.08
1900
2641
2971
3270
4293
4861
1906
2714
3016
3348
4340
4880
5944
6754
7828
8667
9494
10725
12121
14765
17081
4804
5369
6145
6669
7589
8677
9622
10767
11959
13586
14991
16897
18509
20960
23156
8570
9515
10105
11224
13544
15592
16018
18394
19214
22161
24828
26640
29890
31992
30925
34362
36525
40582
56 (281-110)
Service Overhung
Load
Factor
(lb)
1.42
1.42
1.42
1.42
1.27
1.18
2.85
2.85
2.80
2.64
2.28
2.12
1.86
1.69
1.54
1.43
1.27
1.20
1.09
0.92
0.81
3.78
3.56
3.25
3.04
2.79
2.58
2.40
2.20
2.05
1.73
1.56
1.14
1.05
1.04
0.94
3.89
3.51
3.71
3.46
2.46
2.14
2.44
2.12
1.87
1.65
1.41
1.29
1.23
1.15
1.08
0.97
1.03
0.95
1519
1360
1289
1227
997
852
2840
3017
3046
3059
3090
2999
2807
2652
2414
2167
1964
1666
1371
1236
654
4563
4653
4743
4833
4923
4577
4833
4554
4808
4931
4888
5003
5415
6047
6182
7007
7061
7117
7114
7354
7452
7548
8215
8330
8661
8888
9054
9357
9509
9396
9621
9801
9824
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
207UCBN2A3.6A_E
5.0
5.6
6.3
8.0
9.0
208UCBN2A3.6A_E
5.0
5.6
6.3
8.0
9.0
11.
12.
14.
16.
18.
20.
22.
28.
32.
09UCBN2A9.0A_E
10.
11.
12.
14.
16.
18.
20.
22.
25.
28.
32.
36.
40.
45.
10UCBN2A16.A_E
18.
20.
22.
25.
28.
32.
36.
40.
45.
50.
56.
63.
71.
10UCBN3A56.A_E
63.
71.
80.
Part No.
4767573
4767577
4767581
4767585
4767589
4767593
4767662
4767666
4767670
4767674
4767678
4767682
4767686
4767690
4767694
4767700
4767706
4767712
4767718
4767724
4767730
4740715
4740719
4740723
4740727
4740731
4740737
4740743
4740749
4740755
4740761
4740767
4740773
4740779
4740785
4740791
4763009
4763015
4763021
4763027
4763033
4763039
4763045
4763051
4763057
4763063
4763069
4763075
4763081
4763087
4763093
4763099
4763105
4763111
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
207UCFN2A3.6A_E
5.0
5.6
6.3
8.0
9.0
208UCFN2A3.6A_E
5.0
5.6
6.3
8.0
9.0
11.
12.
14.
16.
18.
20.
22.
28.
32.
09UCFN2A9.0A_E
10.
11.
12.
14.
16.
18.
20.
22.
25.
28.
32.
36.
40.
45.
10UCFN2A16.A_E
18.
20.
22.
25.
28.
32.
36.
40.
45.
50.
56.
63.
71.
10UCFN3A56.A_E
63.
71.
80.
Part No.
4768160
4768164
4768168
4768172
4768176
4768180
4768249
4768253
4768257
4768261
4768265
4768269
4768273
4768277
4768281
4768287
4768293
4768299
4768305
4768311
4768317
4745341
4741538
4741542
4741546
4741550
4741556
4741562
4741568
4741574
4741580
4741586
4741592
4741598
4741604
4741610
4763253
4763259
4763265
4763271
4763277
4763283
4763289
4763295
4763301
4763307
4763313
4763319
4763325
4763331
4763337
4763343
4763349
4763355
Motors are available from the
Factory or Distributors.
15 HP/254TC Motor Part No.
1940404 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts, 3
Phase, 60 Hz, NEMA B,
1.15 Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
©Rexnord, 1998, 2013
UC — Gearmotor Selection Table
20 HP/1750 rpm/256TC Frame Motor
Approx.
Output
rpm
Exact
Ratio
Actual
Output
Torque
(lb-in)
479
345
308
280
214
188
479
338
304
273
211
188
153
136
117
105
96
85
75
310
266
238
214
192
171
150
138
121
106
95
85
77
68
61
54
147
141
124
107
96
91
82
68
59
57
50
47
41
37
3.68
5.09
5.72
6.29
8.22
9.34
3.68
5.21
5.79
6.44
8.33
9.35
11.47
12.92
15.04
16.69
18.26
20.66
23.32
5.69
6.63
7.40
8.22
9.19
10.27
11.71
12.74
14.53
16.59
18.43
20.59
22.87
26.04
28.74
32.31
11.98
12.51
14.16
16.43
18.25
19.41
21.57
26.03
29.99
30.76
35.44
37.06
42.70
47.93
2533
3522
3962
4361
5724
6482
2542
3618
4021
4464
5787
6506
7925
9005
10438
11556
12659
14300
16162
3953
4623
5175
5733
6406
7159
8194
8892
10118
11570
12830
14357
15945
18115
19989
22529
8358
8694
9837
11427
12687
13474
14965
18058
20790
21358
24525
25619
29549
33105
©Rexnord, 1998, 2013
Service Overhung
Load
Factor
(lb)
1.07
1.07
1.07
1.07
0.95
0.88
2.14
2.14
2.10
1.98
1.71
1.59
1.40
1.27
1.15
1.07
0.95
0.90
0.82
3.85
3.56
3.32
3.04
2.83
2.67
2.44
2.28
2.09
1.94
1.80
1.65
1.54
1.29
1.17
0.86
3.77
3.74
3.45
2.92
2.63
2.79
2.60
1.85
1.60
1.83
1.59
1.40
1.23
1.06
1452
1150
1022
903
480
220
2787
2944
2967
2967
2944
2787
2450
2202
1818
1512
1204
767
311
4226
4284
4342
4409
4457
4470
4492
4569
4582
4255
4571
4129
4442
4522
4377
4445
6538
6586
6728
6883
6894
6935
6865
7083
7063
7172
7957
8064
8354
8535
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
207UCBN2A3.6A_E
5.0
5.6
6.3
8.0
9.0
208UCBN2A3.6A_E
5.0
5.6
6.3
8.0
9.0
11.
12.
14.
16.
18.
20.
22.
09UCBN2A5.6A_E
6.3
7.1
8.0
9.0
10.
11.
12.
14.
16.
18.
20.
22.
25.
28.
32.
10UCBN2A11.A_E
12.
14.
16.
18.
20.
22.
25.
28.
32.
36.
40.
45.
50.
Part No.
4767573
4767577
4767581
4767585
4767589
4767593
4767662
4767666
4767670
4767674
4767678
4767682
4767686
4767690
4767694
4767700
4767706
4767712
4767718
4740699
4740703
4740707
4740711
4740715
4740719
4740723
4740727
4740731
4740737
4740743
4740749
4740755
4740761
4740767
4740773
4762995
4762999
4763003
4763009
4763015
4763021
4763027
4763033
4763039
4763045
4763051
4763057
4763063
4763069
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
207UCFN2A3.6A_E
5.0
5.6
6.3
8.0
9.0
208UCFN2A3.6A_E
5.0
5.6
6.3
8.0
9.0
11.
12.
14.
16.
18.
20.
22.
09UCFN2A5.6A_E
6.3
7.1
8.0
9.0
10.
11.
12.
14.
16.
18.
20.
22.
25.
28.
32.
10UCFN2A11.A_E
12.
14.
16.
18.
20.
22.
25.
28.
32.
36.
40.
45.
50.
Part No.
4768160
4768164
4768168
4768172
4768176
4768180
4768249
4768253
4768257
4768261
4768265
4768269
4768273
4768277
4768281
4768287
4768293
4768299
4768305
4741518
4741522
4741526
4741530
4741534
4741538
4741542
4741546
4741550
4741556
4741562
4741568
4741574
4741580
4741586
4741592
4763239
4763243
4763247
4763253
4763259
4763265
4763271
4763277
4763283
4763289
4763295
4763301
4763307
4763313
Motors are available from the
Factory or Distributors.
20 HP/256TC Motor Part No.
1940405 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz, NEMA B,
1.15 Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
(281-110) 57
UC — Gearmotor Selection Table
25 HP/1750 rpm/284TC Frame Motor
Approx.
Output
rpm
Exact
Ratio
Actual
Output
Torque
(lb-in)
533
477
431
384
347
310
266
238
214
192
171
150
138
121
106
95
85
77
68
61
205
166
147
141
124
107
96
91
82
68
59
57
50
47
3.30
3.69
4.09
4.58
5.07
5.69
6.63
7.40
8.22
9.19
10.27
11.71
12.74
14.53
16.59
18.43
20.59
22.87
26.04
28.74
8.58
10.59
11.98
12.51
14.16
16.43
18.25
19.41
21.57
26.03
29.99
30.76
35.44
37.06
2876
3209
3559
3997
4416
4941
5779
6469
7166
8007
8948
10242
11115
12648
14462
16037
17946
19932
22644
24986
7442
9211
10448
10868
12296
14284
15859
16843
18707
22573
25988
26698
30657
32023
58 (281-110)
Service Overhung
Load
Factor
(lb)
3.32
2.98
3.88
3.61
3.31
3.08
2.85
2.65
2.43
2.27
2.14
1.95
1.82
1.67
1.55
1.44
1.32
1.23
1.04
0.94
3.84
3.33
3.02
2.99
2.76
2.34
2.10
2.23
2.08
1.48
1.28
1.46
1.27
1.12
3667
3796
3937
4059
4126
4181
4229
4277
4345
4351
4287
4242
4306
4242
3933
4308
3703
4075
4113
3866
6121
6313
6445
6496
6622
6759
6727
6753
6616
6813
6674
6795
7699
7797
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
09UCBN2A3.2A_F
3.6
4.0
4.5
5.0
5.6
6.3
7.1
8.0
9.0
10.
11.
12.
14.
16.
18.
20.
22.
25.
28.
10UCBN2A9.0A_F
10.
11.
12.
14.
16.
18.
20.
22.
25.
28.
32.
36.
40.
Part No.
4740680
4740684
4740688
4740692
4740696
4740700
4740704
4740708
4740712
4740716
4740720
4740724
4740728
4740732
4740738
4740744
4740750
4740756
4740762
4740768
4762988
4762992
4762996
4763000
4763004
4763010
4763016
4763022
4763028
4763034
4763040
4763046
4763052
4763058
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
09UCFN2A3.2A_F
3.6
4.0
4.5
5.0
5.6
6.3
7.0
8.0
9.0
10.
11.
12.
14.
16.
18.
20.
22.
25.
28.
10UCFN2A9.0A_F
10.
11.
12.
14.
16.
18.
20.
22.
25.
28.
32.
36.
40.
Part No.
4741499
4741503
4741507
4741511
4741515
4741519
4741523
4741527
4741531
4741535
4741539
4741543
4741547
4741551
4741557
4741563
4741569
4741575
4741581
4741587
4763232
4763236
4763240
4763244
4763248
4763254
4763260
4763266
4763272
4763278
4763284
4763290
4763296
4763302
Motors are available from the
Factory or Distributors.
25 HP/284TC Motor Part No.
1940406 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz,NEMA B,
1.15 Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
©Rexnord, 1998, 2013
UC — Gearmotor Selection Table
30 HP/1750 rpm/286TC Frame Motor
Approx.
Output
rpm
Exact
Ratio
Actual
Output
Torque
(lb-in)
864
771
687
593
533
477
431
384
347
310
266
238
214
192
171
150
138
121
106
95
85
77
543
503
262
242
222
205
166
147
141
124
107
96
91
82
68
59
57
50
2.04
2.28
2.56
2.97
3.30
3.69
4.09
4.58
5.07
5.69
6.63
7.40
8.22
9.19
10.27
11.71
12.74
14.53
16.59
18.43
20.59
22.87
3.24
3.50
6.72
7.26
7.95
8.58
10.59
11.98
12.51
14.16
16.43
18.25
19.41
21.57
26.03
29.99
30.76
35.44
2136
2393
2677
3096
3451
3851
4271
4796
5299
5930
6935
7762
8599
9609
10738
12291
13338
15178
17355
19245
21535
23918
3399
3661
7027
7574
8275
8931
11054
12538
13042
14756
17141
19031
20211
22448
27088
31185
32037
36788
©Rexnord, 1998, 2013
Service Overhung
Load
Factor
(lb)
3.89
3.77
3.57
3.92
2.77
2.48
3.23
3.01
2.76
2.57
2.37
2.21
2.03
1.89
1.78
1.63
1.52
1.39
1.29
1.20
1.10
1.03
3.75
3.53
3.74
3.53
3.36
3.20
2.78
2.51
2.49
2.30
1.95
1.75
1.86
1.73
1.23
1.07
1.22
1.06
3134
3259
3362
3542
3635
3760
3905
4020
4088
4136
4174
4213
4280
4245
4104
3991
4043
3901
3611
4046
3278
3709
4926
5051
5893
5950
6008
6056
6233
6352
6406
6516
6634
6559
6571
6367
6543
6285
6418
7441
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
09UCBN2A1.8A_F
2.2
2.5
2.8
3.2
3.6
4.0
4.5
5.0
5.6
6.3
7.1
8.0
9.0
10.
11.
12.
14.
16.
18.
20.
22.
10UCBN2A3.2A_F
3.6
6.3
7.1
8.0
9.0
10.
11.
12.
14.
16.
18.
20.
22.
25.
28.
32.
36.
Part No.
4740664
4740668
4740672
4740676
4740680
4740684
4740688
4740692
4740696
4740700
4740704
4740708
4740712
4740716
4740720
4740724
4740728
4740732
4740738
4740744
4740750
4740756
4762952
4762956
4762976
4762980
4762984
4762988
4762992
4762996
4763000
4763004
4763010
4763016
4763022
4763028
4763034
4763040
4763046
4763052
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
09UCFN2A1.8A_F
2.2
2.5
2.8
3.2
3.6
4.0
4.5
5.0
5.6
6.3
7.1
8.0
9.0
10.
11.
12.
14.
16.
18.
20.
22.
10UCFN2A3.2A_F
3.6
6.3
7.1
8.0
9.0
10.
11.
12.
14.
16.
18.
20.
22.
25.
28.
32.
36.
Part No.
4741483
4741487
4741491
4741495
4741499
4741503
4741507
4741511
4741515
4741519
4741523
4741527
4741531
4741535
4741539
4741543
4741547
4741551
4741557
4741563
4741569
4741575
4763196
4763200
4763220
4763224
4763228
4763232
4763236
4763240
4763244
4763248
4763254
4763260
4763266
4763272
4763278
4763284
4763290
4763296
Motors are available from the
Factory or Distributors.
30 HP/286TC Motor Part No.
1940407 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz, NEMA B,
1.15 Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
(281-110) 59
UC — Gearmotor Selection Table
40 HP/1750 rpm/324TC Frame Motor
Approx.
Output
rpm
Exact
Ratio
Actual
Output
Torque
(lb-in)
1190
864
771
687
593
533
477
431
384
347
310
266
238
214
192
171
150
138
121
106
96
85
1220
874
803
707
588
543
503
421
387
356
328
262
242
222
205
166
147
141
124
107
96
91
82
68
59
1.48
2.04
2.28
2.56
2.97
3.30
3.69
4.09
4.58
5.07
5.69
6.63
7.40
8.22
9.19
10.27
11.71
12.74
14.53
16.59
18.43
20.59
1.44
2.01
2.19
2.49
2.99
3.24
3.50
4.18
4.55
4.94
5.37
6.72
7.26
7.95
8.58
10.59
11.98
12.51
14.16
16.43
18.25
19.41
21.57
26.03
29.99
2066
2849
3191
3570
4128
4602
5135
5695
6395
7065
7907
9247
10350
11466
12812
14318
16388
17784
20237
23140
25601
28714
2004
2808
3058
3475
4143
4532
4882
5811
6340
6868
7480
9370
10098
11034
11908
14739
16717
17389
19674
22855
25375
26949
29931
36117
41580
60 (281-110)
Service Overhung
Load
Factor
(lb)
3.18
2.92
2.83
2.68
2.94
2.08
1.86
2.42
2.26
2.07
1.93
1.78
1.66
1.52
1.42
1.34
1.22
1.14
1.05
0.97
0.90
0.83
3.18
3.18
3.18
3.18
3.18
2.81
2.65
3.18
3.18
3.18
3.18
2.81
2.65
2.52
2.40
2.08
1.88
1.87
1.72
1.46
1.31
1.39
1.30
0.92
0.80
2813
3095
3214
3311
3490
3571
3690
3840
3943
4011
4046
4065
4085
4152
4033
3738
3490
3516
3220
2967
2562
2427
3802
4219
4332
4496
4788
4868
4987
5302
5443
5584
5674
5790
5841
5893
5928
6072
6166
6227
6304
6385
6224
6208
5870
6002
5507
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
09UCBN2A1.4A_G
1.8
2.2
2.5
2.8
3.2
3.6
4.0
4.5
5.0
5.6
6.3
7.1
8.0
9.0
10.
11.
12.
14.
16.
18.
20.
10UCBN2A1.4A_G
1.8
2.2
2.5
2.8
3.2
3.6
4.0
4.5
5.0
5.6
6.3
7.1
8.0
9.0
10.
11.
12.
14.
16.
18.
20.
22.
25.
28.
Part No.
4740661
4740665
4740669
4740673
4740677
4740681
4740685
4740689
4740693
4740697
4740701
4740705
4740709
4740713
4740717
4740721
4740725
4740729
4740733
4740737
4740741
4740745
4762933
4762937
4762941
4762945
4762949
4762953
4762957
4762961
4762969
4762969
4762973
4762977
4762981
4762985
4762989
4762993
4762997
4763001
4763005
4763011
4763017
4763023
4763029
4763035
4763041
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
09UCFN2A1.4A_G
1.8
2.2
2.5
2.8
3.2
3.6
4.0
4.5
5.0
5.6
6.3
7.1
8.0
9.0
10.
11.
12.
14.
16.
18.
20.
10UCFN2A1.4A_G
1.8
2.2
2.5
2.8
3.2
3.6
4.0
4.5
5.0
5.6
6.3
7.1
8.0
9.0
10.
11.
12.
14.
16.
18.
20.
22.
25.
28.
Part No.
4741480
4741484
4741488
4741492
4741496
4741500
4741504
4741508
4741512
4741516
4741520
4741524
4741528
4741532
4741536
4741540
4741544
4741548
4741552
4741556
4741560
4741564
4763177
4763181
4763185
4763189
4763193
4763197
4763201
4763205
4763209
4763213
4763217
4763221
4763225
4763229
4763233
4763237
4763241
4763245
4763249
4763255
4763261
4763267
4763273
4763279
4763283
Motors are available from the
Factory or Distributors.
40 HP/324TC Motor Part No.
1940408 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz, NEMA B,
1.15 Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
©Rexnord, 1998, 2013
UC — Gearmotor Selection Table
50 HP/1750 rpm/326TC Frame Motor
Approx.
Output
rpm
Exact
Ratio
Actual
Output
Torque
(lb-in)
1190
864
771
687
593
533
477
431
384
347
310
266
238
214
192
171
150
138
121
1220
874
803
707
588
543
503
421
387
356
328
262
242
222
205
166
147
141
124
107
96
91
82
1.48
2.04
2.28
2.56
2.97
3.3
3.69
4.09
4.58
5.07
5.69
6.63
7.4
8.22
9.19
10.27
11.71
12.74
14.53
1.44
2.01
2.19
2.49
2.99
3.24
3.5
4.18
4.55
4.94
5.37
6.72
7.26
7.95
8.58
10.59
11.98
12.51
14.16
16.43
18.25
19.41
21.57
2582
3561
3989
4463
5161
5752
6419
7119
7994
8832
9883
11558
12938
14332
16015
17897
20485
22230
25297
2506
3510
3823
4344
5179
5665
6102
7264
7925
8585
9350
11713
12623
13792
14885
18423
20896
21736
24593
28568
31718
33686
37414
©Rexnord, 1998, 2013
Service Overhung
Load
Factor
(lb)
2.55
2.34
2.26
2.14
2.35
1.66
1.49
1.94
1.8
1.65
1.54
1.42
1.33
1.22
1.13
1.07
0.98
0.91
0.84
2.55
2.55
2.55
2.55
2.55
2.25
2.12
2.55
2.55
2.55
2.55
2.24
2.12
2.01
1.92
1.67
1.51
1.49
1.38
1.17
1.05
1.11
1.04
2787
3057
3169
3259
3439
3506
3619
3776
3866
3934
3956
3956
3956
4023
3821
3371
2989
2989
2539
3776
4181
4293
4451
4743
4810
4923
5238
5372
5507
5597
5687
5732
5777
5799
5912
5979
6047
6092
6137
5889
5844
5372
Base Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
09UCBN2A1.4A_G
1.8
2.2
2.5
2.8
3.2
3.6
4.0
4.5
5.0
5.6
6.3
7.1
8.0
9.0
10.
11.
12.
14.
10UCBN2A1.4A_G
1.8
2.2
2.5
2.8
3.2
3.6
4.0
4.5
5.0
5.6
6.3
7.1
8.0
9.0
10.
11.
12.
14.
16.
18.
20.
22.
Part No.
4740661
4740665
4740669
4740673
4740677
4740681
4740685
4740689
4740693
4740697
4740701
4740705
4740709
4740713
4740717
4740721
4740725
4740729
4740733
4762933
4762937
4762941
4762945
4762949
4762953
4762957
4762961
4762969
4762969
4762973
4762977
4762981
4762985
4762989
4762993
4762997
4763001
4763005
4763011
4763017
4763023
4763029
Flange Mounted
Gear Drive Less Motor
Inch Dimensioned
Drive Designation
09UCFN2A1.4A_G
1.8
2.2
2.5
2.8
3.2
3.6
4.0
4.5
5.0
5.6
6.3
7.1
8.0
9.0
10.
11.
12.
14.
10UCFN2A1.4A_G
1.8
2.2
2.5
2.8
3.2
3.6
4.0
4.5
5.0
5.6
6.3
7.1
8.0
9.0
10.
11.
12.
14.
16.
18.
20.
22.
Part No.
4741480
4741484
4741488
4741492
4741496
4741500
4741504
4741508
4741512
4741516
4741520
4741524
4741528
4741532
4741536
4741540
4741544
4741548
4741552
4763177
4763181
4763185
4763189
4763193
4763197
4763201
4763205
4763209
4763213
4763217
4763221
4763225
4763229
4763233
4763237
4763241
4763245
4763249
4763255
4763261
4763267
4763273
Motors are available from the
Factory or Distributors.
50 HP/326TC Motor Part No.
1940409 Conforms to the
following specifications:
Energy Efficient
C Face motor less base, TEFC,
1750 rpm, 208–230/460 Volts,
3 Phase, 60 Hz, NEMA B,
1.15 Service Factor
Premium Efficient available
upon request.
Motors meeting other
specifications are available
upon request.
(281-110) 61
Type UC Double Reduction Gearmotor
Sizes 201 – 10 — Dimensions – Inches
Base Mounted
K
S
AB
R
KO
X - CLEARANCE
LOW SPEED
SHAFT KEY
N
U
BD
O
FP
V
D
J
4 - HOLES
H - DIA
G
Q
E
A
SIZE
«
201
202
203
204
205
206
207
208
09
10
A
B
D
5.31
5.71
5.71
7.48
7.48
8.27
9.06
11.42
13.39
15.75
5.16
5.98
5.98
7.87
7.87
9.25
9.65
12.20
14.37
17.32
E
2.95 4.33
3.54 4.33
3.54 4.33
4.53 5.31
4.53 5.31
5.12 5.91
5.51 6.69
7.09 8.46
8.86 9.84
9.84 11.42
F
TAPPED HOLE
L - DIA UNF
LA - DEPTH
B
F
G
H
J
L
LA
N
O
Q
R
S
4.33
5.12
5.12
6.50
6.50
7.68
8.07
10.24
12.20
14.57
0.47
0.63
0.63
0.79
0.79
0.94
0.98
1.38
1.57
1.77
0.39
0.39
0.39
0.59
0.59
0.59
0.75
0.75
0.91
1.06
0.98
1.38
1.38
2.17
2.17
2.36
2.36
2.95
3.54
4.33
0.250
0.250
0.250
0.375
0.375
0.375
0.625
0.750
0.750
0.750
0.63
0.71
0.71
0.86
0.75
0.75
1.25
1.50
1.65
1.65
1.575
1.969
1.969
2.362
2.756
2.756
3.150
3.937
4.720
5.510
5.87
7.09
7.09
8.19
8.19
8.43
9.84
12.20
15.51
17.56
2.28
2.95
2.95
3.54
3.94
3.94
4.53
5.51
6.30
7.28
2.99
3.31
3.31
3.82
3.82
4.33
4.69
6.57
7.87
8.86
2.99
3.38
3.38
4.21
4.21
4.33
5.23
6.03
6.78
7.99
U‡
0.750
1.000
1.000
1.250
1.375
1.375
1.625
2.125
2.375
2.875
Low Speed Shaft
Key
.1875 x .1875 x 1.2812
.2500 x .2500 x 1.5625
.2500 x .2500 x 1.5625
.2500 x .2500 x 2.0000
.3125 x .3125 x 2.3750
.3125 x .3125 x 2.3750
.3750 X .3750 X 2.3750
.5000 X .5000 X 2.7500
.6250 X .6250 X 3.6875
.7500 X .7500 X 4.6250
V
X
...
...
...
...
...
0.57
...
...
...
...
...
...
...
...
...
1.26
1.77
1.97
1.54
2.32
‡‡ Sizes 201 thru 206 tolerance is +.0000, –.0005; Sizes 207 thru 10 tolerance is +.0000, –.0010.
Typical NEMA Motor Dimensions «
Drive Size
Frame
Size
AB
56C
143TC/145TC
182TC/184TC
213TC/215TC
254TC/256TC
284TC/286TC
324TC/326TC
5.25
5.25
5.88
7.38
8.94
13.13
14.13
BD
FP
KO
(Max)
All Sizes
7.19
6.50 †
7.19
6.50 †
8.50
9.00 †
10.19
9.00 †
12.50
10.00 †
11.25
15.56
13.38
16.94
12.00
12.06
15.44
16.31
19.63
23.19
25.25
K
(Max)
201
21.45
21.45
24.20
...
...
...
...
202
22.67
22.67
25.42
...
...
...
...
203
22.67
22.67
25.42
...
...
...
...
204
24.13
24.13
28.61
29.61
...
...
...
205
24.52
24.52
29.00
30.00
...
...
...
206
25.35
25.35
29.83
30.83
...
...
...
207
26.84
26.84
30.70
31.70
35.12
...
...
208
30.86
30.86
34.36
35.36
38.86
...
...
09
...
...
36.27
37.14
41.83
45.51
48.20
10
...
...
39.42
40.29
44.79
48.47
51.16
++ Refer to Page 4 for General Information and Reference Notes.
†† BD = 11.44 on all Size 208 drives.
62 (281-110)
©Rexnord, 1998, 2013
Type UC Triple Reduction Gearmotor
Sizes 201 – 10 — Dimensions – Inches
Base Mounted
K
S
AB
R
KO
X - CLEARANCE
LOW SPEED
SHAFT KEY
N
U
BD
O
FP
V
D
J
4 - HOLES
H - DIA
G
Q
E
SIZE
«
201
202
203
204
205
206
207
208
09
10
A
B
D
5.31
5.71
5.71
7.48
7.48
8.27
9.06
11.42
13.39
15.75
5.16
5.98
5.98
7.87
7.87
9.25
9.65
12.20
14.37
17.32
E
2.95 4.33
3.54 4.33
3.54 4.33
4.53 5.31
4.53 5.31
5.12 5.91
5.51 6.69
7.09 8.46
8.86 9.84
9.84 11.42
F
TAPPED HOLE
L - DIA UNF
LA - DEPTH
A
B
F
G
H
J
L
LA
N
O
Q
R
S
4.33
5.12
5.12
6.50
6.50
7.68
8.07
10.24
12.20
14.57
0.47
0.63
0.63
0.79
0.79
0.94
0.98
1.38
1.57
1.77
0.39
0.39
0.39
0.59
0.59
0.59
0.75
0.75
0.91
1.06
0.98
1.38
1.38
2.17
2.17
2.36
2.36
2.95
3.54
4.33
0.250
0.250
0.250
0.375
0.375
0.375
0.625
0.750
0.750
0.750
0.63
0.71
0.71
0.86
0.75
0.75
1.25
1.50
1.65
1.65
1.575
1.969
1.969
2.362
2.756
2.756
3.150
3.937
4.720
5.510
5.87
7.09
7.09
8.19
8.19
8.43
9.84
12.20
15.51
17.56
2.28
2.95
2.95
3.54
3.94
3.94
4.53
5.51
6.30
7.28
2.99
3.31
3.31
3.82
3.82
4.33
4.69
6.57
7.87
8.86
2.99
3.38
3.38
4.21
4.21
4.33
5.23
6.03
6.78
7.99
U‡
0.750
1.000
1.000
1.250
1.375
1.375
1.625
2.125
2.375
2.875
Low Speed Shaft
Key
.1875 x .1875 x 1.2812
.2500 x .2500 x 1.5625
.2500 x .2500 x 1.5625
.2500 x .2500 x 2.0000
.3125 x .3125 x 2.3750
.3125 x .3125 x 2.3750
.3750 X .3750 X 2.3750
.5000 X .5000 X 2.7500
.6250 X .6250 X 3.6875
.7500 X .7500 X 4.6250
V
X
...
...
...
...
...
0.57
...
...
...
...
...
...
...
...
...
1.26
1.77
1.97
1.54
2.32
‡‡ Sizes 201 thru 206 tolerance is +.0000, –.0005; Sizes 207 thru 10 tolerance is +.0000, –.0010.
Typical NEMA Motor Dimensions «
Drive Size
Frame
Size
AB
56C
143TC/145TC
182TC/184TC
213TC/215TC
254TC/256TC
284TC/286TC
324TC/326TC
5.25
5.25
5.88
7.38
8.94
13.13
14.13
BD
FP
KO
(Max)
All Sizes
6.50
7.19
6.50
7.19
9.00
8.50
9.00
10.19
10.00
12.50
11.25
15.56
13.38
16.94
12.00
12.06
15.44
16.31
19.63
23.19
25.25
K
(Max)
201
22.04
22.04
24.79
...
...
...
...
202
23.18
23.18
25.93
...
...
...
...
203
23.18
23.18
25.93
...
...
...
...
204
25.03
25.03
27.78
...
...
...
...
205
25.43
25.43
28.18
...
...
...
...
206
26.25
26.25
29.00
...
...
...
...
207
27.39
27.39
31.88
32.88
...
...
...
208
30.78
30.78
34.63
35.63
39.06
...
...
09
33.89
33.95
37.33
...
...
...
...
10
...
...
41.15
42.02
46.72
50.39
53.08
++ Refer to Page 4 for General Information and Reference Notes.
©Rexnord, 1998, 2013
(281-110) 63
Type UC Quadruple Reduction Gearmotor
Sizes 203 – 10 — Dimensions – Inches
Base Mounted
S
AB
R
K
X - CLEARANCE`
LOW SPEED
SHAFT KEY
KO
N
U
VB
V
VA
D
J
A
B
5.71
7.48
7.48
8.27
9.06
11.42
13.39
15.75
5.98
7.87
7.87
9.25
9.65
12.20
14.37
17.32
D
E
3.54 4.33
4.53 5.31
4.53 5.31
5.12 5.91
5.51 6.69
7.09 8.46
8.86 9.84
9.84 11.42
Q
G
E
A
4 - HOLES
H - DIA
SIZE
«
203
204
205
206
207
208
09
10
FP
BD
O
F
B
TAPPED HOLE
L - DIA UNF
LA - DEPTH
F
G
H
J
L
LA
N
O
Q
R
S
5.12
6.50
6.50
7.68
8.07
10.24
12.20
14.57
0.63
0.79
0.79
0.94
0.98
1.38
1.57
1.77
0.39
0.59
0.59
0.59
0.75
0.75
0.91
1.06
1.38
2.17
2.17
2.36
2.36
2.95
3.54
4.33
0.250
0.375
0.375
0.375
0.625
0.750
0.750
0.750
0.71
0.86
0.75
0.75
1.25
1.50
1.65
1.65
1.969
2.362
2.756
2.756
3.150
3.937
4.720
5.510
7.09
8.19
8.19
8.43
9.84
12.20
15.51
17.56
2.95
3.54
3.94
3.94
4.53
5.51
6.30
7.28
3.31
3.82
3.82
4.33
4.69
6.57
7.87
8.86
3.38
4.21
4.21
4.33
5.23
6.03
6.78
7.99
U‡
1.000
1.250
1.375
1.375
1.625
2.125
2.375
2.875
Low Speed Shaft
Key
.2500 x .2500 x 1.5625
.2500 x .2500 x 2.0000
.3125 x .3125 x 2.3750
.3125 x .3125 x 2.3750
.3750 X .3750 X 2.3750
.5000 X .5000 X 2.7500
.6250 X .6250 X 3.6875
.7500 X .7500 X 4.6250
V
VA
VB
X
...
...
...
0.57
...
...
...
...
2.99
3.58
3.58
3.58
4.53
4.53
4.53
5.51
...
...
...
...
...
...
...
6.1
...
...
...
1.26
1.77
1.97
1.54
2.32
‡‡ Sizes 203 thru 206 tolerance is +.0000, –.0005; Sizes 207 thru 10 tolerance is +.0000, –.0010.
Typical NEMA Motor Dimensions «
Drive Size
Frame
Size
AB
BD
56C
143TC/145TC
182TC/184TC
213TC/215TC
5.25
5.25
5.88
7.38
All Sizes
6.50
7.19
6.50
7.19
9.00
8.50
9.00
10.19
FP
KO
(Max)
12.00
12.06
15.44
16.31
K
(Max)
203
29.99
32.67
...
...
202
32.67
32.67
...
...
205
33.06
33.06
...
...
206
33.89
33.89
...
...
207
35.35
35.35
...
...
208
39.40
39.40
43.89
...
09
42.59
42.59
47.07
...
10
47.16
47.16
51.01
52.01
++ Refer to Page 4 for General Information and Reference Notes.
64 (281-110)
©Rexnord, 1998, 2013
Type UC Quintruple Reduction Gearmotor
Sizes 203 – 10 — Dimensions – Inches
Base Mounted
S
AB
R
K
X - CLEARANCE`
LOW SPEED
SHAFT KEY
KO
N
U
VB
V
VA
D
J
A
B
5.71
7.48
7.48
8.27
9.06
11.42
13.39
15.75
5.98
7.87
7.87
9.25
9.65
12.20
14.37
17.32
D
E
3.54 4.33
4.53 5.31
4.53 5.31
5.12 5.91
5.51 6.69
7.09 8.46
8.86 9.84
9.84 11.42
Q
G
E
A
4 - HOLES
H - DIA
SIZE
«
203
204
205
206
207
208
09
10
FP
BD
O
F
B
TAPPED HOLE
L - DIA UNF
LA - DEPTH
F
G
H
J
L
LA
N
O
Q
R
S
5.12
6.50
6.50
7.68
8.07
10.24
12.20
14.57
0.63
0.79
0.79
0.94
0.98
1.38
1.57
1.77
0.39
0.59
0.59
0.59
0.75
0.75
0.91
1.06
1.38
2.17
2.17
2.36
2.36
2.95
3.54
4.33
0.250
0.375
0.375
0.375
0.625
0.750
0.750
0.750
0.71
0.86
0.75
0.75
1.25
1.50
1.65
1.65
1.969
2.362
2.756
2.756
3.150
3.937
4.720
5.510
7.09
8.19
8.19
8.43
9.84
12.20
15.51
17.56
2.95
3.54
3.94
3.94
4.53
5.51
6.30
7.28
3.31
3.82
3.82
4.33
4.69
6.57
7.87
8.86
3.38
4.21
4.21
4.33
5.23
6.03
6.78
7.99
U‡
1.000
1.250
1.375
1.375
1.625
2.125
2.375
2.875
Low Speed Shaft
Key
.2500 x .2500 x 1.5625
.2500 x .2500 x 2.0000
.3125 x .3125 x 2.3750
.3125 x .3125 x 2.3750
.3750 X .3750 X 2.3750
.5000 X .5000 X 2.7500
.6250 X .6250 X 3.6875
.7500 X .7500 X 4.6250
V
VA
VB
X
...
...
...
0.57
...
...
...
...
2.99
3.58
3.58
3.58
4.53
4.53
4.53
5.51
...
...
...
...
...
...
...
6.1
...
...
...
1.26
1.77
1.97
1.54
2.32
‡‡ Sizes 203 thru 206 tolerance is +.0000, –.0005; Sizes 207 thru 10 tolerance is +.0000, –.0010.
Typical NEMA Motor Dimensions «
Drive Size
Frame
Size
AB
BD
FP
KO
(Max)
56C
143TC/145TC
182TC/184TC
5.25
5.25
5.88
All Sizes
6.50
7.19
6.50
7.19
9.00
8.50
12.00
12.06
15.44
K
(Max)
203
30.58
33.18
...
202
33.18
33.18
...
205
33.57
33.57
...
206
34.40
34.40
...
207
35.86
35.86
...
208
39.72
39.72
44.20
09
42.91
42.91
47.39
10
47.79
47.79
51.64
++ Refer to Page 4 for General Information and Reference Notes.
©Rexnord, 1998, 2013
(281-110) 65
Type UC Double Reduction Gearmotor
Sizes 201-10 — Dimensions – Inches
Flange Mounted
SIZES 09 & 10
SIZES 201 - 208
AB
K
AB
X - CLEARANCE
U
MA
N
A BB
SIZE
«
201
202
203
204
205
206
207
208
09
10
A
BB
G
4.72
5.51
6.30
7.87
4.72
5.51
6.30
7.87
4.72
5.51
6.30
7.87
5.51
6.30
7.87
9.84
5.51
6.30
7.87
9.84
7.87
9.84
11.81
7.87
9.84
11.81
11.81
13.78
17.72
17.72
3.15
3.74
4.33
5.12
3.15
3.74
4.33
5.12
3.15
3.74
4.33
5.12
3.74
4.33
5.12
7.09
3.74
4.33
5.12
7.09
5.12
7.09
9.06
5.12
7.09
9.06
9.06
9.84
13.78
13.78
0.35
0.35
0.39
0.39
0.39
0.39
0.39
0.39
0.39
0.39
0.39
0.39
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.67
0.67
0.71
0.87
M
V
Z
Y - QTY
& DIA
Y - QTY
& DIA
FP
BD
YA - BOLT
CIRCLE
YA - BOLT
CIRCLE
KO
TAPPED HOLE
L - DIA UNF
LA - DEPTH
L
LA
M
MA
N
0.250
0.63
2.99
2.91
1.575
0.250
0.71
3.58
3.54
1.969
0.250
0.71
3.58
3.54
1.969
0.375
0.86
4.53
3.66
2.362
0.375
0.75
4.53
3.66
2.756
0.375
0.75
5.12
3.31
2.756
0.625
1.25
5.51
4.33
3.150
0.750
1.50
7.17
5.12
3.937
0.750
0.750
1.65
1.65
9.06
10.24
5.92
7.33
4.720
5.510
NB
G
NB
U‡
1.57
1.57
1.57
1.57
1.97
1.97
1.97
1.97
1.97
1.97
1.97
1.97
2.36
2.36
2.36
2.36
2.76
2.76
2.76
2.76
2.76
2.76
2.76
3.15
3.15
3.15
3.94
3.94
5.51
5.51
Low Speed Shaft
Key
V
X
0.750
.1875 x .1875 x 1.2812
...
...
1.000
.2500 x .2500 x 1.5625
...
...
1.000
.2500 x .2500 x 1.5625
...
...
1.250
.2500 x .2500 x 2.0000
...
...
1.375
.3125 x .3125 x 2.3750
...
...
1.375
.3125 x .3125 x 2.3750
0.57
1.26
1.625
.3750 x .3750 x 2.3750
...
1.77
2.125
.5000 x .5000 x 2.7500
...
1.97
2.375
2.875
.6250 x .6250 x 3.6875
.7500 x .7500 x 4.6250
...
...
1.54
2.32
Y
YA
Z
4 x 0.35
4 x 0.35
4 x 0.35
4 x 0.43
4 x 0.26
4 x 0.35
4 x 0.35
4 x 0.43
4 x 0.26
4 x 0.35
4 x 0.35
4 x 0.43
4 x 0.35
4 x 0.35
4 x 0.43
4 x 0.53
4 x 0.35
4 x 0.35
4 x 0.43
4 x 0.53
4 x 0.43
4 x 0.53
4 x 0.53
4 x 0.43
4 x 0.53
4 x 0.53
4 x 0.53
4 x 0.69
8 x 0.71
8 x 0.71
3.94
4.53
5.12
6.50
3.94
4.53
5.12
6.50
3.94
4.53
5.12
6.50
4.53
5.12
6.50
8.46
4.53
5.12
6.50
8.46
6.50
8.46
10.43
6.50
8.46
10.43
10.43
11.81
15.75
15.75
0.12
0.12
0.14
0.14
0.12
0.12
0.14
0.14
0.12
0.12
0.14
0.14
0.12
0.14
0.14
0.16
0.12
0.14
0.14
0.16
0.16
0.16
0.16
0.14
0.16
0.16
0.16
0.20
0.20
0.20
44 See Page 96 for optional flange sizes and their part numbers.
‡‡ Sizes 201 thru 206 tolerance is +.0000, –.0005; Sizes 207 thru 10 tolerance is +.0000, –.0010.
Standard supplied flange if not specified.
Typical NEMA Motor Dimensions «
Drive Size
Frame
Size
AB
BD
56C
143TC/145TC
182TC/184TC
213TC/215TC
254TC/256TC
284TC/286TC
324TC/326TC
5.25
5.25
5.88
7.38
8.94
13.13
14.13
6.50 †
6.50 †
9.00 †
9.00 †
10.00 †
11.25
13.38
FP
KO
(Max)
KO
(Max)
201
202
203
204
205
206
207
208
09
10
12.00
12.06
15.44
16.31
19.63
23.19
25.25
21.45
21.45
24.20
...
...
...
...
22.67
22.67
25.42
...
...
...
...
22.67
22.67
25.42
...
...
...
...
24.13
24.13
28.61
29.61
...
...
...
24.52
24.52
29.00
30.00
...
...
...
25.35
25.35
29.83
30.83
...
...
...
26.84
26.84
30.70
31.70
35.12
...
...
30.86
30.86
34.36
35.36
38.80
...
...
...
...
36.33
37.33
42.20
45.57
48.20
...
...
39.48
40.48
45.16
48.53
51.16
All Sizes
7.19
7.19
8.50
10.19
12.50
15.56
16.94
K
(Max)
++ Refer to Page 4 for General Information and Reference Notes.
†† BD = 11.44 on all Size 208 drives.
66 (281-110)
©Rexnord, 1998, 2013
Type UC Triple Reduction Gearmotor
Sizes 201-10 — Dimensions – Inches
Flange Mounted
SIZES 09 & 10
SIZES 201 - 208
AB
K
AB
X - CLEARANCE
U
MA
N
A BB
SIZE
«
201
202
203
204
205
206
207
208
09
10
A
BB
G
4.72
5.51
6.30
7.87
4.72
5.51
6.30
7.87
4.72
5.51
6.30
7.87
5.51
6.30
7.87
9.84
5.51
6.30
7.87
9.84
7.87
9.84
11.81
7.87
9.84
11.81
11.81
13.78
17.72
17.72
3.15
3.74
4.33
5.12
3.15
3.74
4.33
5.12
3.15
3.74
4.33
5.12
3.74
4.33
5.12
7.09
3.74
4.33
5.12
7.09
5.12
7.09
9.06
5.12
7.09
9.06
9.06
9.84
13.78
13.78
0.35
0.35
0.39
0.39
0.39
0.39
0.39
0.39
0.39
0.39
0.39
0.39
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.67
0.67
0.71
0.87
M
V
Z
Y - QTY
& DIA
Y - QTY
& DIA
FP
BD
YA - BOLT
CIRCLE
YA - BOLT
CIRCLE
KO
TAPPED HOLE
L - DIA UNF
LA - DEPTH
L
LA
M
MA
N
0.250
0.63
2.99
2.91
1.575
0.250
0.71
3.58
3.54
1.969
0.250
0.71
3.58
3.54
1.969
0.375
0.86
4.53
3.66
2.362
0.375
0.75
4.53
3.66
2.756
0.375
0.75
5.12
3.31
2.756
0.625
1.25
5.51
4.33
3.150
0.750
1.50
7.17
5.12
3.937
0.750
0.750
1.65
1.65
9.06
10.24
5.92
7.33
4.720
5.510
NB
1.57
1.57
1.57
1.57
1.97
1.97
1.97
1.97
1.97
1.97
1.97
1.97
2.36
2.36
2.36
2.36
2.76
2.76
2.76
2.76
2.76
2.76
2.76
3.15
3.15
3.15
3.94
3.94
5.51
5.51
G
NB
U‡
Low Speed Shaft
Key
V
X
0.750
.1875 x .1875 x 1.2812
...
...
1.000
.2500 x .2500 x 1.5625
...
...
1.000
.2500 x .2500 x 1.5625
...
...
1.250
.2500 x .2500 x 2.0000
...
...
1.375
.3125 x .3125 x 2.3750
...
...
1.375
.3125 x .3125 x 2.3750
0.57
1.26
1.625
.3750 x .3750 x 2.3750
...
1.77
2.125
.5000 x .5000 x 2.7500
...
1.97
2.375
2.875
.6250 x .6250 x 3.6875
.7500 x .7500 x 4.6250
...
...
1.54
2.32
Y
YA
Z
4 x 0.35
4 x 0.35
4 x 0.35
4 x 0.43
4 x 0.26
4 x 0.35
4 x 0.35
4 x 0.43
4 x 0.26
4 x 0.35
4 x 0.35
4 x 0.43
4 x 0.35
4 x 0.35
4 x 0.43
4 x 0.53
4 x 0.35
4 x 0.35
4 x 0.43
4 x 0.53
4 x 0.43
4 x 0.53
4 x 0.53
4 x 0.43
4 x 0.53
4 x 0.53
4 x 0.53
4 x 0.69
8 x 0.71
8 x 0.71
3.94
4.53
5.12
6.50
3.94
4.53
5.12
6.50
3.94
4.53
5.12
6.50
4.53
5.12
6.50
8.46
4.53
5.12
6.50
8.46
6.50
8.46
10.43
6.50
8.46
10.43
10.43
11.81
15.75
15.75
0.12
0.12
0.14
0.14
0.12
0.12
0.14
0.14
0.12
0.12
0.14
0.14
0.12
0.14
0.14
0.16
0.12
0.14
0.14
0.16
0.16
0.16
0.16
0.14
0.16
0.16
0.16
0.20
0.20
0.20
44 See Page 96 for optional flange sizes and their part numbers.
‡‡ Sizes 201 thru 206 tolerance is +.0000, –.0005; Sizes 207 thru 10 tolerance is +.0000, –.0010.
Standard supplied flange if not specified.
Typical NEMA Motor Dimensions «
Frame
Size
AB
56C
143TC/145TC
182TC/184TC
213TC/215TC
254TC/256TC
284TC/286TC
324TC/326TC
5.25
5.25
5.88
7.38
8.94
13.13
14.13
BD
FP
All Sizes
6.50
7.19
6.50
7.19
9.00
8.50
9.00
10.19
10.00
12.50
11.25
15.56
13.38
16.94
KO
(Max)
12.00
12.06
15.44
16.31
19.63
23.19
25.25
201
22.04
22.04
24.79
...
...
...
...
202
23.18
23.18
25.93
...
...
...
...
Drive Size
KO
(Max)
203
204
23.18
25.03
23.18
25.03
25.93
27.78
...
...
...
...
...
...
...
...
205
25.43
25.43
28.18
...
...
...
...
206
26.25
26.25
29.00
...
...
...
...
207
27.39
27.39
31.88
32.88
...
...
...
K
(Max)
208
30.78
30.78
34.63
35.63
39.06
...
...
09
33.89
33.95
37.33
...
...
...
...
10
...
...
41.15
42.02
46.72
50.39
53.08
++ Refer to Page 4 for General Information and Reference Notes.
©Rexnord, 1998, 2013
(281-110) 67
Type UC Quadruple Reduction Gearmotor
Sizes 201-10 — Dimensions – Inches
Flange Mounted
K
SIZES 203 - 208
SIZES 09 & 10
X - CLEARANCE
AB
KO
AB
U
N
MA
SIZE
«
203
204
205
206
207
208
09
10
BB
G
4.72
5.51
6.30
7.87
5.51
6.30
7.87
9.84
5.51
6.30
7.87
9.84
7.87
9.84
11.81
7.87
9.84
11.81
11.81
13.78
17.72
17.72
3.15
3.74
4.33
5.12
3.74
4.33
5.12
7.09
3.74
4.33
5.12
7.09
5.12
7.09
9.06
5.12
7.09
9.06
9.06
9.84
13.78
13.78
0.39
0.39
0.39
0.39
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.67
0.67
0.71
0.87
VA
V
YA - BOLT
CIRCLE
YA - BOLT
CIRCLE
Y - QTY
& DIA
A
FP
BD
M
Y - QTY
& DIA
VB
BB
A
Z
TAPPED HOLE
L - DIA UNF
LA - DEPTH
L
LA
M
MA
N
NB
0.250
0.71
3.58
3.54
1.969
0.375
0.86
4.53
3.66
2.362
0.375
0.75
4.53
3.66
2.756
0.375
0.75
5.12
3.31
2.756
0.625
1.25
5.51
4.33
3.150
0.750
1.50
7.17
5.12
3.937
0.750
0.750
1.65
1.65
9.06
10.24
5.92
7.33
4.720
5.510
1.97
1.97
1.97
1.97
2.36
2.36
2.36
2.36
2.76
2.76
2.76
2.76
2.76
2.76
2.76
3.15
3.15
3.15
3.94
3.94
5.51
5.51
G
NB
U‡
Low Speed Shaft
Key
V
VA
1.000
.2500 x .2500 x 1.5625
...
2.99
1.250
.2500 x .2500 x 2.0000
...
3.58
1.375
.3125 x .3125 x 2.3750
...
3.58
1.375
.3125 x .3125 x 2.3750
0.57
3.58
...
1.625
.3750 x .3750 x 2.3750
4.53
2.125
.5000 x .5000 x 2.7500
...
4.53
2.375
2.875
.6250 x .6250 x 3.6875
.7500 x .7500 x 4.6250
...
...
4.53
5.51
VB
X
...
...
...
...
...
...
...
...
6.1
Y
4 x 0.26
4 x 0.35
4 x 0.35
4 x 0.43
. . . 4 x 0.35
4 x 0.35
4 x 0.43
4 x 0.53
. . . 4 x 0.35
4 x 0.35
4 x 0.43
4 x 0.53
1.26 4 x 0.43
4 x 0.53
4 x 0.53
1.77 4 x 0.43
4 x 0.53
4 x 0.53
1.97 4 x 0.53
4 x 0.69
1.54 8 x 0.71
2.32 8 x 0.71
YA
Z
3.94
4.53
5.12
6.50
4.53
5.12
6.50
8.46
4.53
5.12
6.50
8.46
6.50
8.46
10.43
6.50
8.46
10.43
10.43
11.81
15.75
15.75
0.12
0.12
0.14
0.14
0.12
0.14
0.14
0.16
0.12
0.14
0.14
0.16
0.16
0.16
0.16
0.14
0.16
0.16
0.16
0.20
0.20
0.20
44 See Page 96 for optional flange sizes and their part numbers.
‡‡ Sizes 203 thru 206 tolerance is +.0000, –.0005; Sizes 207 thru 10 tolerance is +.0000, –.0010.
Standard supplied flange if not specified.
Typical NEMA Motor Dimensions «
Frame
Size
56C
143TC/145TC
182TC/184TC
213TC/215TC
All Sizes
AB
BD
FP
5.25
5.25
5.88
7.38
6.50
6.50
9.00
9.00
7.19
7.19
8.50
10.19
KO
(Max)
12.00
12.06
15.44
16.31
203
KO
(Max)
29.99
32.67
...
...
Drive Size
204
205
KO
KO
(Max)
(Max)
32.67
33.06
32.67
33.06
...
...
...
...
206
K
(Max)
33.89
33.89
...
...
207
K
(Max)
35.35
35.35
...
...
208
K
(Max)
39.40
39.40
43.89
...
09
K
(Max)
42.59
42.59
47.07
...
10
K
(Max)
47.16
47.16
51.01
52.01
++ Refer to Page 4 for General Information and Reference Notes.
68 (281-110)
©Rexnord, 1998, 2013
Type UC Quintuple Reduction Gearmotor
Sizes 201-10 — Dimensions – Inches
Flange Mounted
K
SIZES 203 - 208
SIZES 09 & 10
X - CLEARANCE
AB
KO
AB
U
N
MA
BB
A
M
SIZE
«
203
204
205
206
207
208
09
10
A
BB
G
4.72
5.51
6.30
7.87
5.51
6.30
7.87
9.84
5.51
6.30
7.87
9.84
7.87
9.84
11.81
7.87
9.84
11.81
11.81
13.78
17.72
17.72
3.15
3.74
4.33
5.12
3.74
4.33
5.12
7.09
3.74
4.33
5.12
7.09
5.12
7.09
9.06
5.12
7.09
9.06
9.06
9.84
13.78
13.78
0.39
0.39
0.39
0.39
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.67
0.67
0.71
0.87
L
FP
BD
VA
V
YA - BOLT
CIRCLE
YA - BOLT
CIRCLE
Y - QTY
& DIA
Y - QTY
& DIA
VB
Z
TAPPED HOLE
L - DIA UNF
LA - DEPTH
LA
M
MA
N
NB
0.250
0.71
3.58
3.54
1.969
0.375
0.86
4.53
3.66
2.362
0.375
0.75
4.53
3.66
2.756
0.375
0.75
5.12
3.31
2.756
0.625
1.25
5.51
4.33
3.150
0.750
1.50
7.17
5.12
3.937
0.750
0.750
1.65
1.65
9.06
10.24
5.92
7.33
4.720
5.510
1.97
1.97
1.97
1.97
2.36
2.36
2.36
2.36
2.76
2.76
2.76
2.76
2.76
2.76
2.76
3.15
3.15
3.15
3.94
3.94
5.51
5.51
G
NB
U‡
Low Speed Shaft
Key
V
VA
VB
1.000
.2500 x .2500 x 1.5625
...
2.99
...
1.250
.2500 x .2500 x 2.0000
...
3.58
...
1.375
.3125 x .3125 x 2.3750
...
3.58
...
1.375
.3125 x .3125 x 2.3750
0.57
3.58
...
1.625
.3750 x .3750 x 2.3750
...
4.53
...
2.125
.5000 x .5000 x 2.7500
...
4.53
...
2.375
2.875
.6250 x .6250 x 3.6875
.7500 x .7500 x 4.6250
...
...
4.53
5.51
...
6.1
X
Y
4 x 0.26
4 x 0.35
...
4 x 0.35
4 x 0.43
4 x 0.35
4 x 0.35
...
4 x 0.43
4 x 0.53
4 x 0.35
4 x 0.35
...
4 x 0.43
4 x 0.53
4 x 0.43
1.26 4 x 0.53
4 x 0.53
4 x 0.43
1.77 4 x 0.53
4 x 0.53
1.97 4 x 0.53
4 x 0.69
1.54 8 x 0.71
2.32 8 x 0.71
YA
Z
3.94
4.53
5.12
6.50
4.53
5.12
6.50
8.46
4.53
5.12
6.50
8.46
6.50
8.46
10.43
6.50
8.46
10.43
10.43
11.81
15.75
15.75
0.12
0.12
0.14
0.14
0.12
0.14
0.14
0.16
0.12
0.14
0.14
0.16
0.16
0.16
0.16
0.14
0.16
0.16
0.16
0.20
0.20
0.20
44 See Page 96 for optional flange sizes and their part numbers.
‡‡ Sizes 203 thru 206 tolerance is +.0000, –.0005; Sizes 207 thru 10 tolerance is +.0000, –.0010.
Standard supplied flange if not specified.
Typical NEMA Motor Dimensions 
Frame
Size
56C
143TC/145TC
182TC/184TC
All Sizes
AB
BD
FP
5.25
5.25
5.88
6.50
6.50
9.00
7.19
7.19
8.50
KO
(Max)
12.00
12.06
15.44
203
KO
(Max)
30.58
33.18
...
Drive Size
204
205
KO
KO
(Max)
(Max)
33.18
33.57
33.18
33.57
...
...
206
K
(Max)
34.40
34.40
...
207
K
(Max)
35.86
35.86
...
208
K
(Max)
39.72
39.72
44.20
09
K
(Max)
42.91
42.91
47.39
10
K
(Max)
47.79
47.79
51.64
++ Refer to Page 4 for General Information and Reference Notes.
©Rexnord, 1998, 2013
(281-110) 69
UC — Overhung Loads
High & Low Speed Shaft
Overhung load is imposed upon a shaft when a pinion, sprocket or sheave is
used as a power take-off. The magnitude of the load varies with the type of
take-off and its proximity to the shaft bearing. Calculate the load and check the
result against the tabulated overhung load rating.
Overhung Load Formula:
Overhung Load = 126,000 x hp x Fc x Lf
Pitch Dia x rpm
Gearmotor Overhung Load Capacity — The overhung load capacity at the low
speed shaft is found in the Selection Tables on Pages 19 through 23.
Gear Drive Overhung Load Capacity — The overhung load capacity at the high
speed shaft and low speed shaft are found on Page 27.
Example:
Gear Drive Size = 04UCBN2A40.N_, exact ratio of 39.37:1.
Motor = .50 hp at 1750 rpm.
Low speed shaft rpm = 1750 ÷ 39.37 = 44.4 rpm.
3” diameter sprocket mounted on low speed shaft. Centerline of sprocket
overhung load is positioned at B = 0.98 inches. Calculate the overhung load as
follows:
Fc = Load Connection Factor.
CENTER LINE
OF LOAD
HOUSING
Sprocket or Timing Belt. . . . . . . . . . . . . . . . . . . . . 1.00
Machined Pinion & Gear . . . . . . . . . . . . . . . . . . . . 1.25
OHL = 126,000 x 50 x 1.00 x 1.00 = 473 lb
V-Belt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.50
3 x 44.4
Flat Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.50
DISTANCE
Lf = Load Location Factor.
Allowable OHL on Page 27 is 770 lb and is satisfactory for this selection.
For overhung loads applied at the midpoint of the
usable shaft extension, Lf = 1.00
Locate the centerline of the load as close to the drive housing as practical to
minimize the overhung load and increase bearing life. The above overhung load
formula employs the transmitted horsepower, without Service Factor, providing
the overloads, starting loads, and brake capacities do not exceed the amounts
listed in Basic Information on Page 3.
Consult Factory for Higher Overhung Load Ratings — In many cases,
overhung load capacity in excess of that published is available. Published
ratings are based on a combination of the most unfavorable conditions of
rotation, speed, direction of applied load, and drive loading. If the actual load
should exceed the published capacity, refer full details to the Factory; provide
complete application information, as well as direction of rotation, location and
direction of applied load.
CENTERLINE
HSS
OVERHUNG LOAD
CENTERLINE
LSS
OVERHUNG LOAD
A
B
HIGH SPEED
SHAFT
LOW SPEED
SHAFT
Usable Shaft Extension Midpoint
Drive Size
No. of Reductions
201
202
203
204
205
206
2-3
2-3
2-5
2-5
2-5
2-5
2
3
4-5
2
3
4-5
2
3
4-5
2
3
4-5
207
208
09
10
70 (281-110)
HSS
A (Inch)
0.79
0.79
0.79
0.79
0.79
0.79
0.99
0.79
0.79
1.18
0.99
0.79
1.58
1.18
0.79
2.17
2.17
0.99
LSS
B (Inch)
0.79
0.98
0.98
1.18
1.38
1.38
1.58
1.58
1.58
1.97
1.97
1.97
2.36
2.36
2.36
2.76
2.76
2.76
©Rexnord, 1998, 2013
UC – Gear Drive HSS Overhung Load Ratings/Pounds
Double, Triple, Quadruple, & Quintuple Reductions
Consult Factory for higher overhung load ratings
Reduction
Ratio
Double
Triple
Quadruple
Quintuple
201
315
345
...
...
202
345
365
...
...
203
325
365
315
315
Drive Size †
205
206
230
190
315
315
315
315
315
315
204
250
315
315
315
207
345
380
315
315
All Ratios
All Ratios
All Ratios
All Ratios
†† Published ratings are based on a combination of the most unfavorable conditions of loading. For higher ratings, refer full data to the Factory.
208
315
470
365
365
09
315
785
365
365
10
535
880
470
470
UC – Gearmotor & Gear Drive LSS Overhung Load
Ratings/Pounds
Double, Triple, Quadruple, & Quintuple Reductions
Consult Factory for higher overhung load ratings
Reduction
500
400
320
250
200
160
125
100
80
63
50
40
32
25 
Drive Size
201
242
250
254
258
269
288
320
334
334
334
334
374
399
401
202
650
632
628
613
620
646
700
765
855
861
861
861
861
861
203
556
513
507
499
484
476
475
503
549
651
651
736
710
673
204
790
808
819
846
872
904
1073
1025
1129
1236
1380
1504
1533
1581
205
537
537
537
537
537
500
631
684
865
1015
1035
1178
1351
1552
206
...
1399
1207
1063
1054
930
1006
1336
1399
1552
1552
1552
1552
1552
207
1351
1063
982
764
580
533
533
587
682
802
1035
1083
1973
1562
208
2558
2405
2232
1815
1494
1370
1341
1389
1408
1734
2012
2366
2520
3094
09
2270
2295
2295
2340
2385
2430
2475
2565
2925
3530
3820
5035
5890
6295
10
2745
2765
2765
2790
2790
2810
2810
2925
3370
3575
5170
6295
7645
8990
++ The last overhung load value in each Drive Size column applies to all lower output speeds for that drive. Published ratings are based on a combination of the most unfavorable conditions of loading. For higher
ratings, refer full data to the Factor.
©Rexnord, 1998, 2013
(281-110) 71
UC – Gearmotor & Gear Drive LSS Thrust Loads/Pounds
Double, Triple, Quadruple, & Quintuple Reductions
Axial Thrust Capacities/Inward or Outward
Thrust capacities tabulated refer to output shafts, and are
calculated without any overhung loads being applied. In case
where combined axial thrusts and overhung loads are to be
applied, refer to the Factory.
Reduction
1000
630
500
400
320
250
200
160
125
100
80
63
50
40
32
25 
201
...
315
315
315
315
315
315
315
315
315
315
315
315
315
345
345
202
...
605
605
605
605
605
605
605
605
605
605
605
605
605
620
620
203
...
775
775
775
775
775
775
775
775
775
775
775
775
775
800
800
204
...
1270
1270
1270
1270
1270
1270
1270
1270
1270
1270
1270
1270
1270
1290
1290
Drive Size
205
206
...
...
1450
1535
1450
1535
1450
1535
1450
1535
1450
1535
1450
1535
1450
1535
1450
1535
1450
1535
1450
1535
1450
1535
1450
1535
1450
1535
1480
1535
1480
1535
207
...
1640
1640
1640
1640
1640
1640
1640
1640
1640
1640
1640
1640
1640
1690
1690
208
...
1880
1880
1880
1880
1880
1880
1880
1880
1880
1880
1880
1880
1880
2460
2460
09
2135
2295
2295
2295
2295
2295
2295
2295
2295
2655
3035
3440
3440
3440
3440
3440
10
2790
2790
2790
2790
2790
2790
2790
2790
3035
3035
3755
3755
5350
5350
5350
5350
++ The last thrust capacity value in each Drive Size column applies to all lower output speeds for that drive.
Axial Thrust Capacities (lb)
No check or calculation is required for axial loads (FA) towards or away from
the drive up to 50% of the permissible overhung load. If the axial thrust
considerably exceeds these values or if there is a combination of axial thrust
loads and overhung loads please contact Rexnord Engineering.
WR2
Contact the factory.
72 (281-110)
©Rexnord, 1998, 2013
UC – Gear Drive Horsepower & Torque Ratings
3500 High Speed Shaft rpm/Double Reduction
(Torque is in pound-inches at low speed shaft)
Ratio
Code
1.4
1.8
2.2
2.5
2.8
3.2
3.6
4.0
4.5
5.0
5.6
6.3
7.1
8.0
9.0
10.
11.
12.
14.
16.
18.
20.
22.
25.
28.
32.
36.
40.
45.
50.
56.
63.
71.
Approx.
L.S.
Shaft
rpm
201
202
203
204
Horsepower
Drive Size
205 206
207
208
2500
1944
1591
1400
1250
1094
972
875
778
700
625
556
493
438
389
350
318
292
250
219
194
175
159
140
125
109
94
88
78
70
63
56
49
See Low Ratio Double
Page 29
6.04
...
...
5.09
4.72
4.37
...
3.77
3.59
...
3.11
2.87
2.64
2.46
2.27
2.10
1.84
...
1.59
1.41
1.27
...
0.98
0.74
0.64
...
...
10.7
...
...
8.77
8.28
7.68
...
6.64
6.13
...
5.37
5.04
4.65
4.35
3.99
3.56
3.33
...
2.86
2.48
2.26
...
1.97
1.74
1.53
...
...
12.9
...
...
10.5
9.91
9.16
...
7.86
7.22
...
6.29
5.88
5.40
5.01
4.64
4.22
3.99
...
3.53
3.12
2.88
...
2.28
2.06
1.97
...
...
21.6
...
...
17.9
16.8
15.7
...
13.6
12.6
...
11.3
10.4
9.44
8.92
8.44
7.57
7.17
...
6.01
5.25
4.87
...
4.00
3.59
2.56
...
...
35.1
...
...
30.0
28.3
26.6
...
23.1
21.4
...
19.0
17.2
15.4
14.0
13.1
11.1
10.4
...
8.38
7.11
6.50
...
4.95
4.02
2.56
...
...
...
...
...
35.1
30.0
28.3
...
26.6
23.1
...
21.4
19.0
17.2
15.4
14.2
13.6
11.8
...
11.2
9.26
7.98
...
7.30
4.95
4.02
2.56
...
42.3
...
...
39.9
37.4
35.4
...
30.2
28.0
...
24.8
23.4
21.5
20.1
18.6
17.1
15.8
...
14.1
12.2
11.3
...
9.59
7.37
5.65
...
...
65.7
...
...
65.7
65.4
61.7
...
53.1
49.4
...
43.1
39.3
35.5
32.9
30.3
27.8
25.2
...
21.2
18.6
17.3
...
14.5
13.4
11.7
...
...
09
146
125
118
111
146
96.6
89.1
125
118
125
118
96.6
89.1
96.6
89.1
72.0
65.5
72.0
65.5
50.0
45.5
50.0
45.5
34.4
31.4
34.4
31.4
31.2
28.2
23.7
19.9
20.6
18.4
10
253
249
238
223
253
191
180
244
232
220
209
182
173
163
155
135
125
121
112
101
91.9
90.2
84.0
68.7
60.8
65.9
59.9
57.1
49.6
45.2
38.3
36.8
34.3
201
202
203
204
Torque
Drive Size
205 206
207
208
1340
...
...
1560
1640
1730
...
1900
2000
...
2140
2260
2390
2530
2550
2710
2740
...
2850
2930
2980
...
2990
2990
2380
...
...
2190
...
...
2630
2790
2940
...
3250
3400
...
3610
3760
3920
3980
3980
3980
3980
...
3980
3980
3980
...
3700
3350
2380
...
...
...
...
...
2710
3260
3450
...
3640
4020
...
4210
4470
4660
4850
5020
5110
5240
...
5300
5450
5530
...
5540
4590
4150
2950
...
2690
...
...
3530
3710
3860
...
4320
4540
...
4890
5080
5360
5680
5820
6110
6390
...
6610
6800
6890
...
7010
6190
5260
...
...
4160
...
...
5930
6570
6900
...
7680
8020
...
8590
8820
9280
9540
9620
9970
10200
...
10400
10700
10900
...
11100
11200
11300
...
...
09
3750
4430
4690
4950
7530
5570
5740
8880
9410
11000
11700
11200
11500
13900
14300
12900
13400
16000
16600
14500
14700
18000
18200
15600
15800
19300
19500
21800
21800
20200
19100
21800
21800
204
2440
2490
2570
2620
...
2720
2860
2980
...
2990
2990
2990
...
...
Torque
Drive Size
205 206
3800 . . .
3690 4700
3790 4570
3860 4700
...
...
3980 4780
3980 4950
3980 5180
...
...
3980 5340
3980 5540
3980 5540
. . . 5540
...
...
207
5450
5520
5720
5800
...
6070
6290
6430
...
6880
7140
7410
...
...
208
10900
11200
11600
12000
...
12700
13300
13700
...
14600
15000
15000
...
...
09
17600
18100
19600
20300
20100
20700
22500
23200
21800
21800
25300
25300
21900
21900
See Low Ratio Double
Page 29
391
...
...
445
471
494
...
545
560
...
612
641
673
697
710
721
742
...
767
791
794
...
740
635
624
...
...
660
...
...
763
794
837
...
921
965
...
1040
1080
1130
1200
1220
1250
1270
...
1310
1360
1390
...
1410
1410
1410
...
...
803
...
...
919
953
1000
...
1090
1140
...
1220
1260
1320
1390
1420
1480
1520
...
1610
1710
1780
...
1640
1680
1820
...
...
10
6350
8780
9150
9710
13200
10800
11000
17800
18400
18900
19600
21300
21900
22600
23200
25000
26100
26400
27500
28900
29300
30500
31600
31200
31700
35300
36900
36800
36800
37600
34200
36800
36800
10
27800
29100
30400
31400
32400
33400
35000
36500
36800
36800
39100
39100
36900
36900
3500 High Speed Shaft rpm/Triple Reduction
(Torque is in pound-inches at low speed shaft)
Ratio
Code
56.
63.
71.
80.
90.
100
112
125
140
160
180
200
225
250
Approx.
L.S.
Shaft
rpm
63
56
49
44
39
35
31
28
25
22
19
18
16
14
©Rexnord, 1998, 2013
201
0.81
0.73
0.66
0.57
...
0.47
0.41
0.37
...
0.30
0.26
0.23
...
...
202
1.39
1.29
1.19
1.02
...
0.86
0.73
0.66
...
0.55
0.48
0.42
...
...
203
1.84
1.72
1.56
1.34
...
1.12
0.96
0.86
...
0.72
0.62
0.55
...
...
204
2.46
2.27
2.03
1.90
...
1.65
1.45
1.34
...
1.15
1.02
0.90
...
...
Horsepower
Drive Size
205 206
3.80
...
3.35 3.80
2.99 3.35
2.80 2.99
...
...
2.41 2.80
2.01 2.42
1.79 2.11
...
...
1.53 1.93
1.35 1.72
1.19 1.52
...
1.34
...
...
207
5.41
5.14
4.50
4.27
...
3.60
3.16
2.96
...
2.58
2.40
2.23
...
...
208
10.7
9.98
9.14
8.39
...
7.33
6.58
6.16
...
5.33
5.01
4.38
...
...
09
17.2
15.9
15.5
14.4
12.5
11.6
11.3
10.5
8.86
8.01
8.35
7.44
5.83
5.19
10
27.1
25.4
25.1
23.3
19.8
17.7
18.1
16.4
15.9
13.8
13.0
12.1
10.2
9.53
201
794
794
794
794
...
794
795
795
...
795
795
795
...
...
202
1350
1380
1410
1410
...
1410
1410
1410
...
1410
1410
1410
...
...
203
1790
1850
1850
1850
...
1850
1850
1850
...
1850
1850
1850
...
...
(281-110) 73
UC – Gear Drive Horsepower & Torque Ratings
3500 High Speed Shaft rpm/Quadruple Reduction
(Torque is in pound-inches at low speed shaft)
Ratio
Code
225
250
280
300
360
400
450
500
650
730
860
10C
11C
13C
15C
18C
20C
24C
27C
Approx.
L.S.
Shaft
rpm
15.56
14.00
12.50
11.67
9.72
8.75
7.78
7.00
5.38
4.79
4.07
3.50
3.18
2.69
2.33
1.94
1.75
1.46
1.30
203
0.46
0.42
0.38
0.34
0.30
0.27
0.25
0.21
0.18
0.15
0.12
0.11
0.09
0.08
0.07
0.06
0.05
0.05
0.04
204
0.76
0.68
0.63
0.58
0.49
0.42
0.40
0.36
0.29
0.24
0.21
0.17
0.16
0.14
0.11
0.10
0.09
0.08
0.07
205
1.00
0.89
0.84
0.76
0.64
0.56
0.52
0.48
0.39
0.32
0.27
0.23
0.21
0.19
0.15
0.13
0.10
0.09
0.08
Horsepower
Drive Size
206
207
...
1.95
...
1.72
1.18
1.56
1.02
1.42
0.88
1.24
0.81
1.08
0.73
0.95
0.61
0.88
0.57
0.76
0.47
0.63
0.40
0.53
0.33
0.44
0.29
0.40
0.23
0.36
0.20
0.30
0.17
0.26
0.16
0.19
0.14
0.16
0.13
0.14
208
3.16
3.00
2.58
2.30
2.16
1.82
1.66
1.55
1.41
1.14
0.98
0.83
0.75
0.69
0.56
0.46
0.42
0.38
0.34
09
5.91
5.73
4.93
4.41
4.13
3.49
3.14
2.94
2.37
2.01
1.68
1.42
1.29
1.10
0.94
0.86
0.70
0.63
0.56
10
10.36
9.42
8.20
7.23
6.55
5.72
5.15
4.55
3.93
3.29
2.75
2.31
2.00
1.83
1.43
1.31
1.09
0.95
0.85
203
1859
1859
1859
1859
1859
1859
1859
1859
1859
1859
1859
1859
1859
1859
1797
1797
1797
1797
1797
204
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
205
3983
3983
3983
3983
3983
3983
3983
3983
3983
3983
3983
3983
3983
3983
3983
3983
3363
3363
3363
Torque
Drive Size
206
207
...
7655
...
7655
5487
7655
5487
7655
5487
7655
5487
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
6416
5531
6416
5487
6416
208
12390
13275
13275
13275
13275
13275
13629
13629
15045
15045
15045
15045
15045
15045
15045
15045
15045
15045
15045
09
23364
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
10
39029
39029
39029
39029
39029
39029
39029
39029
39029
39029
39029
39029
39029
39029
37701
37701
37701
37701
37701
205
3983
3983
3983
3983
3983
3983
3983
3983
3363
3363
2390
Torque
Drive Size
206
207
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
6416
5487
6416
5487
6416
208
15045
15045
15045
15045
15045
15045
15045
15045
15045
15045
13718
09
25311
25311
25311
25311
25311
25311
21948
21948
25311
25311
21948
10
39029
39029
39029
39029
39029
39029
37701
37701
37701
37701
37436
3500 High Speed Shaft rpm/Quintuple Reduction
(Torque is in pound-inches at low speed shaft)
Ratio
Code
27C
32C
36C
40C
46C
55C
65C
74C
84C
95C
10K
Approx.
L.S.
Shaft
rpm
1.30
1.09
0.97
0.88
0.76
0.64
0.54
0.47
0.42
0.37
0.35
203
0.041
0.035
0.030
0.027
0.024
0.020
0.016
0.014
0.013
0.011
0.010
204
0.066
0.057
0.048
0.043
0.040
0.033
0.027
0.023
0.021
0.018
0.013
205
0.088
0.075
0.064
0.057
0.052
0.044
0.036
0.031
0.023
0.021
0.013
Horsepower
Drive Size
206
207
0.122
0.17
0.105
0.15
0.084
0.12
0.076
0.11
0.064
0.10
0.053
0.084
0.049
0.070
0.043
0.061
0.037
0.044
0.034
0.039
0.030
0.035
208
0.32
0.27
0.23
0.20
0.19
0.16
0.13
0.12
0.11
0.093
0.073
09
0.57
0.47
0.40
0.35
0.32
0.27
0.19
0.17
0.18
0.15
0.11
10
0.93
0.75
0.64
0.58
0.51
0.41
0.36
0.30
0.26
0.24
0.22
203
1859
1859
1859
1859
1797
1797
1797
1797
1797
1797
1797
204
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
2390
2400 High Speed Shaft rpm
Contact the factory.
74 (281-110)
©Rexnord, 1998, 2013
UC – Gear Drive Horsepower & Torque Ratings
1750 High Speed Shaft rpm/Double Reduction
(Torque is in pound-inches at low speed shaft)
Ratio
Code
1.4
1.8
2.2
2.5
2.8
3.2
3.6
4.0
4.5
5.0
5.6
6.3
7.1
8.0
9.0
10.
11.
12.
14.
16.
18.
20.
22.
25.
28.
32.
36.
40.
45.
50.
56.
63.
71.
Approx.
L.S.
Shaft
201
rpm
202
203
204
Horsepower
Drive Size
205 206
207
208
1250
972
795
700
625
547
486
438
389
350
313
278
246
219
194
175
159
146
125
109
97
88
80
70
63
55
49
44
39
35
31
28
25
See Low Ratio Double
Page 29
3.78
...
...
3.19
2.96
2.74
...
2.35
2.21
...
1.83
1.66
1.49
1.38
1.27
1.15
0.98
...
0.82
0.71
0.64
...
0.49
0.37
0.32
...
...
6.67
...
...
5.49
5.19
4.81
...
4.16
3.79
...
3.21
2.95
2.66
2.45
2.24
2.01
1.85
...
1.54
1.29
1.15
...
0.98
0.87
0.77
...
...
7.93
...
...
6.45
6.07
5.61
...
4.82
4.43
...
3.86
3.61
3.31
3.09
2.85
2.59
2.42
...
2.02
1.68
1.50
...
1.20
1.08
0.98
...
...
13.5
...
...
11.2
10.5
9.83
...
8.53
7.91
...
7.02
6.28
5.56
5.15
4.81
4.16
3.90
...
3.15
2.67
2.44
...
2.00
1.79
1.28
...
...
20.6
...
...
18.9
17.8
16.5
...
14.1
12.5
...
10.4
8.60
7.81
6.99
6.55
5.53
5.18
...
4.18
3.55
3.25
...
2.47
2.01
1.28
...
...
...
...
...
20.6
18.9
17.8
...
16.5
14.6
...
13.3
11.3
8.60
8.36
7.85
7.36
6.22
...
5.82
4.70
3.99
...
3.65
2.47
2.01
1.28
...
21.2
...
...
21.2
21.2
21.2
...
19.0
17.6
...
15.6
14.6
13.1
12.0
10.9
9.76
8.74
...
7.65
6.53
6.03
...
5.12
3.69
2.83
...
...
32.9
...
...
32.9
32.9
32.9
...
32.9
31.1
...
27.2
24.7
22.4
20.7
18.9
17.5
15.9
...
13.4
11.7
10.9
...
9.11
8.42
6.97
...
...
09
92.1
78.7
74.3
69.8
92.1
60.9
56.2
78.7
74.3
78.7
74.3
60.9
56.2
60.5
56.2
45.4
41.3
45.3
41.3
31.5
28.7
31.5
28.7
21.6
19.8
21.6
19.8
15.6
14.1
14.8
9.37
10.3
9.17
10
127
127
127
127
127
120
113
127
127
127
127
112
106
100
95.5
83.0
76.5
74.3
68.5
58.1
52.3
55.4
51.6
36.7
31.9
36.4
31.6
28.6
24.8
22.6
19.2
18.4
17.2
201
202
203
204
Torque
Drive Size
205 206
207
208
See Low Ratio Double
Page 29
493
...
...
562
594
623
...
683
692
...
724
742
763
783
794
794
794
...
794
794
794
...
741
636
625
...
...
833
...
...
963
1000
1060
...
1160
1200
...
1250
1270
1300
1360
1370
1410
1410
...
1410
1410
1410
...
1410
1410
1410
...
...
991
...
...
1130
1170
1230
...
1340
1400
...
1500
1560
1620
1720
1740
1830
1850
...
1850
1850
1850
...
1730
1770
1820
...
...
1690
...
...
1970
2070
2180
...
2400
2520
...
2670
2750
2830
2930
2920
2990
2990
...
2990
2990
2990
...
2990
2990
2390
...
...
2590
...
...
3340
3530
3650
...
3980
3980
...
3980
3770
3980
3980
3980
3980
3980
...
3980
3980
3980
...
3700
3360
2390
...
...
...
...
...
3200
4130
4370
...
4530
5080
...
5260
5340
4670
5280
5540
5540
5540
...
5540
5540
5540
...
5540
4580
4160
2960
...
2700
...
...
3760
4220
4640
...
5440
5730
...
6170
6360
6550
6790
6830
6990
7070
...
7170
7290
7360
...
7500
6200
5270
...
...
4190
...
...
5960
6630
7380
...
9560
10200
...
10900
11200
11700
12100
12100
12600
12900
...
13200
13500
13700
...
14100
14200
13500
...
...
09
4770
5620
5940
6270
9570
7060
7280
11300
11900
14000
14800
14100
14600
17400
18100
16300
16900
20200
21000
18300
18500
22700
23000
19700
19900
24400
24700
21800
21800
25300
18000
21800
21800
10
6390
8940
9730
11100
13200
13700
13900
18500
20100
21800
23800
26300
27000
27800
28600
30800
32100
32500
33900
33400
33400
37600
38900
33400
33400
39100
39100
36800
36800
37700
34200
36800
36800
1750 High Speed Shaft rpm/Triple Reduction
(Torque is in pound-inches at low speed shaft)
Ratio
Code
56.
63.
71.
80.
90.
100
112
125
140
160
180
200
225
250
Approx.
L.S.
Shaft
rpm
31
28
25
22
19
18
16
14
13
11
10
8.8
7.8
7.0
201
0.40
0.36
0.33
0.28
...
0.24
0.20
0.18
...
0.15
0.13
0.12
...
...
©Rexnord, 1998, 2013
202
0.73
0.66
0.60
0.51
...
0.43
0.37
0.33
...
0.27
0.24
0.21
...
...
203
0.95
0.86
0.78
0.67
...
0.56
0.48
0.43
...
0.36
0.31
0.28
...
...
204
1.43
1.34
1.18
1.08
...
0.90
0.76
0.67
...
0.58
0.51
0.45
...
...
Horsepower
Drive Size
205 206
1.98 . . .
1.80 2.16
1.57 1.92
1.44 1.73
...
...
1.20 1.62
1.00 1.35
0.89 1.13
...
...
0.77 1.00
0.68 0.86
0.60 0.76
. . . 0.67
...
...
207
3.11
2.96
2.65
2.53
...
2.20
1.92
1.76
...
1.44
1.29
1.15
...
...
208
6.48
6.08
5.58
5.12
...
4.29
3.68
3.35
...
2.73
2.51
2.18
...
...
09
10.5
9.73
9.45
8.78
7.23
6.54
6.31
5.71
4.40
3.98
4.16
3.71
2.90
2.58
10
16.1
14.5
15.3
14.2
10.2
8.83
10.1
8.75
7.92
6.88
6.48
6.04
5.09
4.75
201
795
795
795
795
...
795
795
795
...
795
795
795
...
...
202
1410
1410
1410
1410
...
1410
1410
1410
...
1410
1410
1410
...
...
203
1850
1850
1850
1850
...
1850
1850
1850
...
1850
1850
1850
...
...
204
2870
2960
2990
2990
...
2990
2990
2990
...
2990
2990
2990
...
...
Torque
Drive Size
205 206
3980 . . .
3980 5370
3980 5260
3980 5460
...
...
3980 5540
3980 5540
3980 5540
...
...
3980 5540
3980 5540
3980 5540
. . . 5540
...
...
207
6310
6400
6780
6920
...
7440
7680
7680
...
7680
7680
7680
...
...
208
13400
13800
14300
14800
...
15000
15000
15000
...
15000
15000
15000
...
...
09
21600
22300
24200
24900
23400
23400
25300
25300
21900
21900
25300
25300
21900
21900
10
33400
33400
37500
38700
33400
33400
39100
39100
36900
36900
39100
39100
36900
36900
(281-110) 75
UC – Gear Drive Horsepower & Torque Ratings
1750 High Speed Shaft rpm/Quadruple Reduction
(Torque is in pound-inches at low speed shaft)
Ratio
Code
225
250
280
300
360
400
450
500
650
730
860
10C
11C
13C
15C
18C
20C
24C
27C
Approx.
L.S.
Shaft
rpm
7.78
7.00
6.25
5.83
4.86
4.38
3.89
3.50
2.69
2.40
2.03
1.75
1.59
1.35
1.17
0.97
0.88
0.73
0.65
203
0.23
0.21
0.19
0.17
0.15
0.14
0.12
0.11
0.09
0.07
0.06
0.05
0.05
0.04
0.04
0.03
0.03
0.02
0.02
204
0.38
0.34
0.32
0.29
0.24
0.21
0.20
0.18
0.15
0.12
0.10
0.09
0.08
0.07
0.06
0.05
0.04
0.04
0.03
205
0.50
0.45
0.42
0.38
0.32
0.28
0.26
0.24
0.19
0.16
0.14
0.11
0.10
0.09
0.08
0.07
0.05
0.04
0.04
Horsepower
Drive Size
206
207
…
0.98
…
0.86
0.59
0.78
0.51
0.71
0.44
0.62
0.40
0.54
0.36
0.48
0.30
0.44
0.29
0.38
0.24
0.32
0.20
0.26
0.17
0.22
0.14
0.20
0.12
0.18
0.10
0.15
0.09
0.13
0.08
0.09
0.07
0.08
0.06
0.07
208
1.58
1.50
1.29
1.15
1.08
0.91
0.83
0.78
0.71
0.57
0.49
0.41
0.38
0.34
0.28
0.23
0.21
0.19
0.17
09
2.96
2.87
2.46
2.20
2.07
1.74
1.57
1.47
1.19
1.01
0.84
0.71
0.64
0.55
0.47
0.43
0.35
0.31
0.28
10
5.18
4.71
4.10
3.61
3.28
2.86
2.58
2.28
1.96
1.65
1.38
1.16
1.00
0.92
0.72
0.65
0.55
0.47
0.43
203
1859
1859
1859
1859
1859
1859
1859
1859
1859
1859
1859
1859
1859
1859
1797
1797
1797
1797
1797
204
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
205
3983
3983
3983
3983
3983
3983
3983
3983
3983
3983
3983
3983
3983
3983
3983
3983
3363
3363
3363
Torque
Drive Size
206
207
…
7655
…
7655
5487
7655
5487
7655
5487
7655
5487
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
6416
5531
6416
5487
6416
208
12390
13275
13275
13275
13275
13275
13629
13629
15045
15045
15045
15045
15045
15045
15045
15045
15045
15045
15045
09
23364
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
10
39029
39029
39029
39029
39029
39029
39029
39029
39029
39029
39029
39029
39029
39029
37701
37701
37701
37701
37701
205
3983
3983
3983
3983
3983
3983
3983
3983
3363
3363
2390
Torque
Drive Size
206
207
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
6416
5487
6416
5487
6416
208
15045
15045
15045
15045
15045
15045
15045
15045
15045
15045
13718
09
25311
25311
25311
25311
25311
25311
21948
21948
25311
25311
21948
10
39029
39029
39029
39029
39029
39029
37701
37701
37701
37701
37436
1750 High Speed Shaft rpm/Quintuple Reduction
(Torque is in pound-inches at low speed shaft)
Ratio
Code
27C
32C
36C
40C
46C
55C
65C
74C
84C
95C
10K
Approx.
L.S.
Shaft
rpm
0.65
0.55
0.49
0.44
0.38
0.32
0.27
0.24
0.21
0.184
0.175
203
0.021
0.018
0.015
0.013
0.012
0.010
0.008
0.007
0.006
0.006
0.005
204
0.033
0.029
0.024
0.022
0.02
0.017
0.014
0.012
0.011
0.009
0.007
205
0.044
0.038
0.032
0.026
0.026
0.022
0.018
0.016
0.012
0.01
0.007
Horsepower
Drive Size
206
207
0.062
0.086
0.053
0.074
0.043
0.062
0.038
0.056
0.033
0.051
0.027
0.042
0.025
0.035
0.022
0.031
0.019
0.022
0.017
0.020
0.015
0.018
208
0.16
0.14
0.12
0.10
0.094
0.081
0.066
0.058
0.053
0.047
0.037
09
0.29
0.24
0.20
0.18
0.16
0.14
0.10
0.085
0.088
0.078
0.054
10
0.50
0.41
0.34
0.31
0.27
0.22
0.20
0.16
0.14
0.13
0.12
203
1859
1859
1859
1859
1797
1797
1797
1797
1797
1797
1797
204
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
2390
1430 High Speed Shaft rpm
Contact the factory.
76 (281-110)
©Rexnord, 1998, 2013
UC – Gear Drive Horsepower & Torque Ratings
1170 High Speed Shaft rpm/Double Reduction
(Torque is in pound-inches at low speed shaft)
Ratio
Code
1.4
1.8
2.2
2.5
2.8
3.2
3.6
4.0
4.5
5.0
5.6
6.3
7.1
8.0
9.0
10.
11.
12.
14.
16.
18.
20.
22.
25.
28.
32.
36.
40.
45.
50.
56.
63.
71.
Approx.
L.S.
Shaft
rpm
201
836
650
532
468
418
366
325
293
260
234
209
186
165
147
130
117
106
98
84
73
65
59
53
47
42
37
33
29
26
23
21
19
16
202
203
204
Horsepower
Drive Size
205 206
207
208
See Low Ratio Double
Page 30
2.87
...
...
2.42
2.22
2.01
...
1.66
1.56
...
1.31
1.17
1.03
0.93
0.84
0.76
0.65
...
0.54
0.47
0.42
...
0.33
0.24
0.21
...
...
5.06
...
...
4.17
3.94
3.58
...
2.96
2.67
...
2.28
2.11
1.91
1.69
1.53
1.33
1.23
...
1.02
0.85
0.76
...
0.65
0.58
0.51
...
...
5.94
...
...
4.83
4.55
4.20
...
3.61
3.32
...
2.89
2.70
2.48
2.20
2.00
1.74
1.60
...
1.34
1.12
0.99
...
0.83
0.74
0.65
...
...
10.2
...
...
8.51
7.97
7.46
...
6.28
5.69
...
4.95
4.45
3.89
3.48
3.26
2.76
2.58
...
2.08
1.77
1.62
...
1.32
1.19
0.85
...
...
13.7
...
...
12.7
12.2
10.9
...
9.35
8.25
...
6.92
5.70
5.17
4.63
4.34
3.67
3.43
...
2.77
2.35
2.15
...
1.69
1.33
0.85
...
...
...
...
...
13.7
12.7
12.2
...
10.9
9.97
...
9.00
7.76
5.70
5.54
5.20
4.88
4.12
...
3.86
3.11
2.64
...
2.42
1.69
1.33
0.85
...
14.0
...
...
14.0
14.0
14.0
...
14.0
13.0
...
11.1
10.3
9.25
8.31
7.60
6.72
6.02
...
5.28
4.51
4.16
...
3.48
2.44
1.87
...
...
21.8
...
...
21.8
21.8
21.8
...
21.8
21.8
...
20.6
18.8
17.0
14.3
12.5
11.9
11.1
...
9.94
8.68
7.91
...
6.45
5.92
4.71
...
...
09
70.0
59.8
56.4
53.1
70.0
46.3
42.7
59.8
56.4
59.8
56.4
46.3
42.7
45.3
42.2
34.5
31.4
34.0
31.1
24.0
21.8
23.2
20.9
16.5
15.1
14.9
13.4
10.3
9.35
9.80
6.02
6.81
6.02
10
83.9
83.9
83.9
83.9
83.9
80.7
74.7
83.9
83.9
83.9
83.9
83.6
79.7
75.1
71.5
59.6
52.7
55.7
51.3
38.5
34.7
38.2
34.4
24.3
21.1
24.1
21.0
18.9
16.4
15.0
12.7
12.2
11.4
201
202
203
204
Torque
Drive Size
205 206 207
208
See Low Ratio Double
Page 30
566
...
...
645
671
689
...
727
737
...
782
794
794
794
794
794
794
...
794
794
794
...
741
636
626
...
...
956
...
...
1110
1150
1190
...
1250
1280
...
1340
1380
1410
1410
1410
1410
1410
...
1410
1410
1410
...
1410
1410
1410
...
...
1120
...
...
1280
1330
1400
...
1520
1590
...
1700
1760
1840
1850
1850
1850
1850
...
1850
1850
1850
...
1790
1830
1820
...
...
1930
...
...
2260
2380
2500
...
2670
2740
...
2840
2940
2990
2990
2990
2990
2990
...
2990
2990
2990
...
2990
2990
2390
...
...
2590
...
...
3380
3650
3660
...
3980
3980
...
3980
3770
3980
3980
3980
3980
3980
...
3980
3980
3980
...
3820
3360
2390
...
...
...
...
...
3210
4190
4520
...
4530
5260
...
5380
5530
4670
5280
5540
5540
5540
...
5540
5540
5540
...
5540
4740
4160
2960
...
2710
...
...
3760
4230
4650
...
6080
6390
...
6650
6780
6990
7110
7170
7270
7360
...
7470
7600
7670
...
7680
6200
5270
...
...
4200
...
...
5980
6640
7390
...
9570
10700
...
12500
12800
13500
12600
12100
12900
13600
...
14800
15000
15000
...
15000
15000
13700
...
...
09
5480
6460
6840
7220
11000
8120
8360
12900
13700
16000
17000
16300
16700
19700
20500
18800
19500
22900
23900
21000
21300
25300
25300
22600
22900
25300
25300
21800
21800
25300
17400
21900
21700
10
6390
8950
9740
11100
13200
13900
13900
18500
20100
21900
23800
29700
30600
31500
32400
33400
33400
36800
38400
33400
33400
39100
39100
33400
33400
39100
39100
36800
36800
37700
34300
36900
36900
09
23400
23400
25300
25300
23400
23400
25300
25300
21900
21900
25300
25300
21900
21900
10
33400
33400
39100
39100
33400
33400
39100
39100
36900
36900
39100
39100
36900
36900
1170 High Speed Shaft rpm/Triple Reduction
(Torque is in pound-inches at low speed shaft)
Ratio
Code
56.
63.
71.
80.
90.
100
112
125
140
160
180
200
225
250
Approx.
L.S.
Shaft
rpm
201
0.27
21
19
0.24
16
0.22
15
0.19
...
13
12
0.16
11
0.13
9.0
0.12
8.4
...
0.10
7.3
6.5
0.09
5.9
0.08
5.2
...
4.7
...
©Rexnord, 1998, 2013
Horsepower
Drive Size
202
0.48
0.44
0.40
0.34
...
0.28
0.24
0.22
...
0.18
0.16
0.14
...
...
203
0.63
0.57
0.52
0.44
...
0.37
0.32
0.29
...
0.24
0.21
0.18
...
...
204
0.99
0.90
0.78
0.72
...
0.60
0.50
0.44
...
0.38
0.34
0.30
...
...
205
1.31
1.19
1.04
0.95
...
0.80
0.66
0.59
...
0.51
0.45
0.39
...
...
206
...
1.47
1.34
1.16
...
1.07
0.89
0.75
...
0.66
0.57
0.50
0.44
...
Torque
Drive Size
207
2.35
2.25
1.99
1.86
...
1.50
1.27
1.16
...
0.95
0.86
0.77
...
...
208
4.80
4.39
3.88
3.44
...
2.84
2.44
2.22
...
1.81
1.66
1.45
...
...
09
7.49
6.75
6.54
5.89
4.78
4.33
4.17
3.78
2.91
2.63
2.75
2.45
1.92
1.71
10
10.7
9.59
10.6
9.50
6.73
5.84
6.67
5.79
5.24
4.55
4.29
4.00
3.37
3.14
201
795
795
795
795
...
795
795
795
...
795
795
795
...
...
202
1410
1410
1410
1410
...
1410
1410
1410
...
1410
1410
1410
...
...
203
1850
1850
1850
1850
...
1850
1850
1850
...
1850
1850
1850
...
...
204
2990
2990
2990
2990
...
2990
2990
2990
...
2990
2990
2990
...
...
205
3980
3980
3980
3980
...
3980
3980
3980
...
3980
3980
3980
...
...
206
...
5540
5540
5540
...
5540
5540
5540
...
5540
5540
5540
5540
...
207
7190
7340
7680
7680
...
7680
7680
7680
...
7680
7680
7780
...
...
208
15000
15000
15000
15000
...
15000
15000
15000
...
15000
15000
15000
...
...
(281-110) 77
UC – Gear Drive Horsepower & Torque Ratings
1170 High Speed Shaft rpm/Quadruple Reduction
(Torque is in pound-inches at low speed shaft)
Ratio
Code
225
250
280
300
360
400
450
500
650
730
860
10C
11C
13C
15C
18C
20C
24C
27C
Approx.
L.S.
Shaft
rpm
5.20
4.68
4.18
3.90
3.25
2.93
2.60
2.34
1.80
1.60
1.36
1.17
0.94
0.90
0.78
0.65
0.59
0.49
0.43
203
0.15
0.14
0.13
0.11
0.10
0.09
0.08
0.07
0.06
0.05
0.04
0.04
0.03
0.03
0.02
0.02
0.02
0.02
0.01
204
0.25
0.22
0.21
0.19
0.16
0.14
0.13
0.12
0.10
0.08
0.07
0.06
0.05
0.05
0.04
0.03
0.03
0.03
0.02
205
0.33
0.30
0.28
0.25
0.21
0.19
0.17
0.16
0.13
0.11
0.09
0.08
0.07
0.06
0.05
0.04
0.03
0.03
0.03
Horsepower
Drive Size
206
207
…
0.65
…
0.57
0.39
0.52
0.34
0.47
0.29
0.41
0.27
0.36
0.24
0.32
0.20
0.29
0.19
0.25
0.16
0.21
0.13
0.18
0.11
0.15
0.10
0.13
0.08
0.12
0.07
0.10
0.06
0.09
0.05
0.06
0.05
0.05
0.04
0.05
208
1.05
0.99
0.85
0.76
0.72
0.60
0.55
0.52
0.47
0.38
0.32
0.28
0.25
0.23
0.19
0.15
0.14
0.13
0.11
09
1.96
1.90
1.63
1.46
1.37
1.16
1.04
0.98
0.79
0.67
0.56
0.47
0.43
0.37
0.31
0.28
0.23
0.21
0.19
10
3.43
3.12
2.72
2.40
2.17
1.90
1.71
1.51
1.30
1.09
0.91
0.77
0.66
0.61
0.47
0.43
0.36
0.31
0.28
203
1859
1859
1859
1859
1859
1859
1859
1859
1859
1859
1859
1859
1859
1859
1797
1797
1797
1797
1797
204
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
205
3983
3983
3983
3983
3983
3983
3983
3983
3983
3983
3983
3983
3983
3983
3983
3983
3363
3363
3363
Torque
Drive Size
206
207
…
7655
…
7655
5487
7655
5487
7655
5487
7655
5487
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
6416
5531
6416
5487
6416
208
12390
13275
13275
13275
13275
13275
13629
13629
15045
15045
15045
15045
15045
15045
15045
15045
15045
15045
15045
09
23364
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
10
39029
39029
39029
39029
39029
39029
39029
39029
39029
39029
39029
39029
39029
39029
37701
37701
37701
37701
37701
205
3983
3983
3983
3983
3983
3983
3983
3983
3363
3363
2390
Torque
Drive Size
206
207
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
6416
5487
6416
5487
6416
208
15071
15071
15071
15071
15071
15071
15071
15071
15071
15071
13741
09
25311
25311
25311
25311
25311
25311
21948
21948
25311
25311
21948
10
39029
39029
39029
39029
39029
39029
37701
37701
37701
37701
37436
1170 High Speed Shaft rpm/Quintuple Reduction
(Torque is in pound-inches at low speed shaft)
Ratio
Code
27C
32C
36C
40C
46C
55C
65C
74C
84C
95C
10K
Approx.
L.S.
Shaft
rpm
0.43
0.37
0.33
0.29
0.25
0.21
0.18
0.16
0.14
0.123
0.117
78 (281-110)
203
0.014
0.012
0.010
0.009
0.008
0.007
0.005
0.005
0.004
0.004
0.003
204
0.022
0.019
0.016
0.015
0.013
0.011
0.009
0.008
0.007
0.0060
0.0040
205
0.029
0.025
0.021
0.018
0.018
0.015
0.012
0.010
0.008
0.0070
0.0040
Horsepower
Drive Size
206
207
0.041
0.057
0.035
0.049
0.028
0.041
0.025
0.037
0.022
0.034
0.018
0.028
0.016
0.023
0.014
0.020
0.013
0.015
0.012
0.013
0.010
0.012
208
0.108
0.090
0.077
0.068
0.062
0.054
0.044
0.039
0.035
0.031
0.025
09
0.19
0.16
0.13
0.12
0.11
0.092
0.064
0.056
0.059
0.052
0.036
10
0.31
0.25
0.21
0.20
0.17
0.14
0.12
0.10
0.089
0.079
0.073
203
1859
1859
1859
1859
1859
1859
1797
1797
1797
1797
1797
204
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
2390
©Rexnord, 1998, 2013
UC – Gear Drive Horsepower & Torque Ratings
870 High Speed Shaft rpm/Double Reduction
(Torque is in pound-inches at low speed shaft)
Approx.
Ratio L.S.
Code Shaft
rpm
1.4
621
1.8
483
2.2
395
2.5
348
2.8
311
3.2
272
3.6
242
4.0
218
4.5
193
5.0
174
5.6
155
6.3
138
7.1
123
8.0
109
9.0
97
10.
87
11.
79
12.
73
14.
62
16.
54
18.
48
20.
44
22.
40
25.
35
28.
31
32.
27
36.
24
40.
22
45.
19
50.
17
56.
16
63.
14
71.
12
Horsepower
201
202
203
204
Drive Size
205 206
Torque
207
208
See Low Ratio Double
Page 30
2.38
...
...
1.92
1.74
1.58
...
1.32
1.25
...
1.00
0.88
0.78
0.70
0.63
0.58
0.49
...
0.41
0.35
0.32
...
0.25
0.18
0.16
...
...
4.19
...
...
3.35
3.10
2.82
...
2.35
2.13
...
1.82
1.64
1.44
1.27
1.15
1.00
0.92
...
0.77
0.64
0.57
...
0.49
0.43
0.38
...
...
4.87
...
...
3.96
3.73
3.45
...
2.96
2.72
...
2.37
2.14
1.88
1.66
1.51
1.31
1.21
...
1.01
0.84
0.75
...
0.64
0.57
0.49
...
...
8.47
...
...
7.04
6.48
5.94
...
4.94
4.49
...
3.93
3.41
2.93
2.63
2.46
2.08
1.95
...
1.57
1.33
1.22
...
1.00
0.90
0.64
...
...
10.3
...
...
9.59
9.22
8.23
...
7.05
6.22
...
5.22
4.30
3.90
3.49
3.27
2.76
2.59
...
2.09
1.77
1.62
...
1.31
1.01
0.64
...
...
...
...
...
10.3
9.59
9.22
...
8.23
7.52
...
6.78
5.85
4.30
4.18
3.92
3.68
3.11
...
2.91
2.35
1.99
...
1.82
1.31
1.01
0.64
...
10.6
...
...
10.6
10.6
10.6
...
10.6
10.2
...
8.80
8.16
7.20
6.44
5.89
5.21
4.67
...
4.09
3.44
3.14
...
2.62
1.84
1.41
...
...
16.4
...
...
16.4
16.4
16.4
...
16.4
16.4
...
16.4
15.6
14.1
10.8
9.46
8.97
8.36
...
7.50
6.55
5.97
...
4.87
4.46
3.55
...
...
09
58.0
49.6
46.8
44.0
58.0
38.4
35.4
49.6
46.8
49.6
46.8
38.4
35.4
37.1
34.6
28.6
26.0
27.9
24.8
19.9
18.1
17.5
15.8
12.8
11.6
11.2
10.1
7.79
7.05
7.39
4.46
5.14
4.46
10
63.3
63.3
63.3
63.3
63.3
60.8
56.3
63.3
63.3
63.3
63.3
63.3
63.3
61.6
58.7
45.0
39.7
44.6
39.4
29.0
26.1
28.8
25.9
18.4
15.9
18.2
15.8
14.3
12.4
11.3
9.59
9.20
8.58
201
202
203
204
Drive Size
205 206 207
208
See Low Ratio Double
Page 30
622
...
...
679
701
720
...
768
782
...
794
794
794
794
794
794
794
...
794
795
795
...
742
636
626
...
...
1050
...
...
1180
1200
1240
...
1310
1350
...
1410
1410
1410
1410
1410
1410
1410
...
1410
1410
1410
...
1410
1410
1410
...
...
1220
...
...
1400
1450
1520
...
1660
1730
...
1850
1850
1850
1850
1850
1850
1850
...
1850
1850
1850
...
1830
1840
1820
...
...
2130
...
...
2490
2570
2640
...
2790
2870
...
2990
2990
2990
2990
2990
2990
2990
...
2990
2990
2990
...
2990
2990
2390
...
...
2590
...
...
3390
3650
3660
...
3980
3980
...
3980
3780
3980
3980
3980
3980
3980
...
3980
3980
3980
...
3920
3360
2390
...
...
...
...
...
3210
4190
4520
...
4530
5260
...
5380
5530
4680
5280
5540
5540
5540
...
5540
5540
5540
...
5540
4850
4160
2960
...
204
2990
2990
2990
2990
...
2990
2990
2990
...
2990
2990
2990
...
...
Torque
Drive Size
205 206
3980 . . .
3980 5540
3980 5540
3980 5540
...
...
3980 5540
3980 5540
3980 5540
...
...
3980 5540
3980 5540
3980 5540
. . . 5540
...
...
2710
...
...
3770
4230
4650
...
6080
6670
...
6980
7120
7210
7300
7370
7480
7570
...
7680
7680
7680
...
7680
6200
5270
...
...
4210
...
...
5980
6650
7400
...
9580
10800
...
13200
14100
14800
12600
12100
12900
13600
...
14800
15000
15000
...
15000
15000
13700
...
...
09
6040
7110
7520
7940
12100
8930
9200
14200
15100
17700
18700
17900
18400
21500
22300
20600
21400
24900
25300
23100
23400
25300
25300
23400
23400
25300
25300
21800
21900
25300
17100
21900
21300
10
6390
8960
9750
11100
13200
13900
13900
18500
20200
21900
23800
29900
32200
34300
35200
33400
33400
39100
39100
33400
33400
39100
39100
33400
33400
39100
39100
36800
36900
37700
34300
36900
36900
09
23400
23400
25300
25300
23400
23400
25300
25300
21900
21900
25300
25300
21900
21900
10
33400
33400
39100
39100
33400
33400
39100
39100
36900
36900
39100
39100
37600
37800
870 High Speed Shaft rpm/Triple Reduction
(Torque is in pound-inches at low speed shaft)
Approx.
Ratio L.S.
Code Shaft
rpm
56.
16
63.
14
71.
12
80.
11
90.
9.7
100
8.7
112
7.8
125
7.0
140
6.2
160
5.4
180
4.8
200
4.4
225
3.9
250
3.5
201
0.20
0.18
0.16
0.14
...
0.12
0.10
0.09
...
0.08
0.07
0.06
...
...
©Rexnord, 1998, 2013
202
0.36
0.33
0.30
0.26
...
0.21
0.18
0.17
...
0.14
0.12
0.11
...
...
203
0.47
0.43
0.39
0.33
...
0.28
0.24
0.22
...
0.18
0.16
0.14
...
...
204
0.75
0.68
0.59
0.54
...
0.45
0.38
0.34
...
0.29
0.25
0.22
...
...
Horsepower
Drive Size
205 206
0.99 . . .
0.90 1.11
0.78 1.01
0.72 0.88
...
...
0.60 0.81
0.50 0.67
0.45 0.56
...
...
0.38 0.50
0.34 0.43
0.30 0.38
. . . 0.33
...
...
207
1.89
1.77
1.50
1.40
...
1.13
0.96
0.88
...
0.73
0.66
0.59
...
...
208
3.62
3.31
2.92
2.59
...
2.14
1.84
1.67
...
1.36
1.25
1.11
...
...
09
5.64
5.08
4.93
4.44
3.60
3.26
3.15
2.85
2.19
1.98
2.07
1.85
1.45
1.29
10
8.02
7.22
7.95
7.16
5.07
4.40
5.02
4.36
3.95
3.43
3.23
3.02
2.59
2.43
201
795
795
795
795
...
795
795
795
...
795
795
795
...
...
202
1410
1410
1410
1410
...
1410
1410
1410
...
1410
1410
1410
...
...
203
1850
1850
1850
1850
...
1850
1850
1850
...
1850
1850
1850
...
...
207
7680
7680
7680
7680
...
7680
7680
7680
...
7830
7680
7680
...
...
208
15000
15000
15000
15000
...
15000
15000
15000
...
15000
15000
15300
...
...
(281-110) 79
UC – Gear Drive Horsepower & Torque Ratings
870 High Speed Shaft rpm/Quadruple Reduction
(Torque is in pound-inches at low speed shaft)
Ratio
Code
225
250
280
300
360
400
450
500
650
730
860
10C
11C
13C
15C
18C
20C
24C
27C
Approx.
L.S.
Shaft
rpm
3.87
3.48
3.11
2.90
2.42
2.18
1.93
1.74
1.34
1.19
1.01
0.87
0.79
0.67
0.58
0.48
0.44
0.36
0.32
203
0.12
0.10
0.09
0.09
0.07
0.07
0.06
0.05
0.04
0.04
0.03
0.03
0.02
0.02
0.02
0.02
0.01
0.01
0.01
204
0.19
0.17
0.16
0.14
0.12
0.11
0.10
0.09
0.07
0.06
0.05
0.04
0.04
0.04
0.03
0.03
0.02
0.02
0.02
205
0.25
0.22
0.21
0.19
0.16
0.14
0.13
0.12
0.10
0.08
0.07
0.06
0.05
0.05
0.04
0.03
0.03
0.02
0.02
Horsepower
Drive Size
206
207
…
0.49
…
0.43
0.29
0.39
0.26
0.36
0.22
0.31
0.20
0.27
0.18
0.24
0.15
0.22
0.14
0.19
0.12
0.16
0.10
0.13
0.08
0.11
0.07
0.10
0.06
0.09
0.05
0.07
0.04
0.06
0.04
0.05
0.04
0.04
0.03
0.04
208
0.79
0.75
0.64
0.58
0.54
0.46
0.42
0.39
0.35
0.29
0.24
0.21
0.19
0.17
0.14
0.12
0.11
0.09
0.08
09
1.48
1.43
1.23
1.10
1.03
0.87
0.79
0.74
0.59
0.50
0.42
0.36
0.32
0.28
0.23
0.21
0.17
0.16
0.14
10
2.59
2.36
2.05
1.81
1.64
1.43
1.29
1.14
0.98
0.82
0.69
0.58
0.50
0.46
0.36
0.33
0.27
0.24
0.21
203
1859
1859
1859
1859
1859
1859
1859
1859
1859
1859
1859
1859
1859
1859
1797
1797
1797
1797
1797
204
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
205
3983
3983
3983
3983
3983
3983
3983
3983
3983
3983
3983
3983
3983
3983
3983
3983
3363
3363
3363
Torque
Drive Size
206
207
…
7655
…
7655
5487
7655
5487
7655
5487
7655
5487
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
6416
5531
6416
5487
6416
208
12390
13275
13275
13275
13275
13275
13629
13629
15045
15045
15045
15045
15045
15045
15045
15045
15045
15045
15045
09
23364
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
25311
10
39029
39029
39029
39029
39029
39029
39029
39029
39029
39029
39029
39029
39029
39029
37701
37701
37701
37701
37701
205
3983
3983
3983
3983
3983
3983
3983
3983
3363
3363
2390
Torque
Drive Size
206
207
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
7655
5531
6416
5487
6416
5487
6416
208
15045
15045
15045
15045
15045
15045
15045
15045
15045
15045
13718
09
25311
25311
25311
25311
25311
25311
21948
21948
25311
25311
21948
10
39029
39029
39029
39029
39029
39029
37701
37701
37701
37701
37436
870 High Speed Shaft rpm/Quintuple Reduction
(Torque is in pound-inches at low speed shaft)
Ratio
Code
27C
32C
36C
40C
46C
55C
65C
74C
84C
95C
10K
80 (281-110)
Approx.
L.S.
Shaft
rpm
0.32
0.27
0.24
0.22
0.19
0.16
0.13
0.12
0.10
0.092
0.087
203
0.010
0.009
0.007
0.007
0.006
0.005
0.004
0.004
0.003
0.003
0.002
204
0.017
0.014
0.012
0.011
0.010
0.008
0.007
0.006
0.005
0.005
0.003
205
0.022
0.019
0.016
0.013
0.013
0.011
0.009
0.008
0.006
0.005
0.003
Horsepower
Drive Size
206
207
0.031
0.043
0.026
0.037
0.021
0.031
0.019
0.028
0.016
0.026
0.014
0.021
0.012
0.018
0.011
0.015
0.009
0.011
0.009
0.010
0.008
0.009
208
0.081
0.068
0.058
0.052
0.047
0.040
0.033
0.029
0.027
0.023
0.019
09
0.14
0.12
0.10
0.089
0.080
0.069
0.048
0.042
0.044
0.039
0.027
10
0.24
0.19
0.16
0.15
0.13
0.10
0.091
0.074
0.067
0.060
0.055
203
1859
1859
1859
1859
1859
1859
1797
1797
1797
1797
1797
204
3009
3009
3009
3009
3009
3009
3009
3009
3009
3009
2390
©Rexnord, 1998, 2013
Thermal Ratings (HP)
Thermal ratings are a measure of the units ability to dissipate heat, if they are exceeded the lubricant may break down resulting in premature gear failure.
Thermal ratings are based on an ambient temperature of 68ºF, when units are to operate at other ambient temperatures the thermal HP ratings must be multiplied by
the following factors.
Ambient Adjustment Factor
DRIVE SIZE
Ambient Temperature °F
All Units
–4
14
32
50
68
86
104
122
1.57
1.43
1.29
1.14
1.0
0.86
0.71
0.5
UC – Gear Drive Thermal Horsepower Ratings ‡
Overall
Ratios
Type of
Cooling
High
Speed
Shaft
rpm
1.4
to
5.6
Units
with no
additional
cooling
6.3
and
over
DRIVE SIZE
201
202
203
204
205
3500
1750
1170
<870
5.5
5.3
5.1
8.0
7.6
7.4
8.0
7.6
7.4
13.2
12.6
12.2
13.2
12.6
12.2
Units
with no
additional
cooling
3500
1750
1170
<870
3.8
5.4
5.2
5.0
5.5
7.8
7.4
7.2
5.5
7.8
7.4
7.2
9.2
13.0
12.4
12.0
1.4
to
5.6
Units
with fan
cooling
3500
1750
1170
<870
...
...
...
...
...
...
...
...
...
...
...
...
6.3
and
over
Units
with fan
cooling
3500
1750
1170
<870
...
...
...
...
...
...
...
...
...
...
...
...
206
207
208
09
10
15.3
14.6
14.2
19.3
18.4
17.9
29.5
28.2
27.3
41.9
40.0
38.8
56.5
54.0
52.3
9.2
13.0
12.4
12.0
10.7
15.0
14.3
13.9
13.5
19.0
18.1
17.6
20.7
29.1
27.8
26.9
29.3
41.3
39.4
38.2
39.5
55.6
53.1
51.4
...
...
...
...
...
...
...
...
...
...
...
...
...
43.4
36.2
31.4
...
66.4
55.3
47.9
...
94.3
78.6
68.1
...
127.1
105.9
91.8
...
...
...
...
...
...
...
...
...
...
...
...
...
42.8
35.6
30.9
...
65.5
54.6
47.3
...
92.9
77.4
67.1
...
125.1
104.3
90.4
CONSULT THE FACTORY
‡‡ Thermal hp ratings are based on standard horizontal (Mounting #1). For ratings in the other positions, consult the Factory.
©Rexnord, 1998, 2013
(281-110) 81
UC – Gear Drive Part Numbers
Base Mounted – Double Reduction
Drive Ratio Exact
Drive
Size Code Ratio
Designation
201 3.6 3.750 201UCBN2A3.6N_
201 5.0 5.066 201UCBN2A5.0N_
201 5.6 5.762 201UCBN2A5.6N_
201 6.3 6.528 201UCBN2A6.3N_
201 8.0 8.348 201UCBN2A8.0N_
201 9.0 8.997 201UCBN2A9.0N_
201 11. 11.36 201UCBN2A11.N_
201 12. 12.88 201UCBN2A12.N_
201 14. 14.71 201UCBN2A14.N_
201 16. 16.37 201UCBN2A16.N_
201 18. 18.05 201UCBN2A18.N_
201 20. 19.86 201UCBN2A20.N_
201 22. 23.27 201UCBN2A22.N_
201 28. 27.92 201UCBN2A28.N_
201 32. 32.54 201UCBN2A32.N_
201 36. 36.16 201UCBN2A36.N_
201 45. 43.54 201UCBN2A45.N_
201 50. 49.91 201UCBN2A50.N_
201 56. 56.72 201UCBN2A56.N_
202 3.6 3.589 202UCBN2A3.6N_
202 5.0 5.034 202UCBN2A5.0N_
202 5.6 5.547 202UCBN2A5.6N_
202 6.3 6.299 202UCBN2A6.3N_
202 8.0 8.000 202UCBN2A8.0N_
202 9.0 9.088 202UCBN2A9.0N_
202 11. 11.15 202UCBN2A11.N_
202 12. 12.37 202UCBN2A12.N_
202 14. 14.05 202UCBN2A14.N_
202 16. 15.97 202UCBN2A16.N_
202 18. 17.58 202UCBN2A18.N_
202 20. 20.23 202UCBN2A20.N_
202 22. 21.99 202UCBN2A22.N_
202 28. 26.40 202UCBN2A28.N_
202 32. 31.68 202UCBN2A32.N_
202 36. 35.69 202UCBN2A36.N_
202 45. 41.49 202UCBN2A45.N_
202 50. 47.09 202UCBN2A50.N_
202 56. 53.54 202UCBN2A56.N_
203 3.6 3.589 203UCBN2A3.6N_
203 5.0 5.034 203UCBN2A5.0N_
203 5.6 5.547 203UCBN2A5.6N_
203 6.3 6.299 203UCBN2A6.3N_
203 8.0 8.000 203UCBN2A8.0N_
203 9.0 9.088 203UCBN2A9.0N_
203 11. 11.15 203UCBN2A11.N_
82 (281-110)
Drive
Part No.
4767172
4767176
4767180
4767184
4767188
4767192
4767195
4767198
4767201
4767204
4767207
4767210
4767213
4767216
4767219
4767222
4767225
4767228
4767231
4767235
4767239
4767243
4767247
4767251
4767255
4767259
4767263
4767267
4767270
4767273
4767276
4767279
4767282
4767285
4767288
4767291
4767294
4767297
4767301
4767305
4767309
4767313
4767317
4767321
4767325
Drive Ratio Exact
Size Code Ratio
12.
12.37
203
203
14.
14.05
203
16.
15.97
203
18.
17.58
203
20.
20.23
203
22.
21.99
203
28.
26.40
203
32.
31.68
203
36.
35.69
203
45.
41.49
203
50.
47.09
203
56.
53.54
204
3.6
3.585
204
5.0
5.040
204
5.6
5.649
204
6.3
6.341
204
8.0
8.053
204
9.0
9.129
204
11.
10.89
204
12.
12.54
204
14.
14.58
204
16.
16.31
204
18.
17.39
204
20.
20.61
204
22.
22.00
204
28.
27.30
204
32.
32.19
204
36.
35.25
204
45.
43.20
204
50.
48.15
204
56.
54.00
205
3.6
3.585
205
5.0
5.040
205
5.6
5.649
205
6.3
6.341
205
8.0
8.053
205
9.0
9.129
205
11.
10.89
205
12.
12.54
205
14.
14.58
205
16.
16.31
205
18.
17.39
205
20.
20.61
205
22.
22.00
205
28.
27.30
Drive
Designation
Drive
Part No.
203UCBN2A12.N_
203UCBN2A14.N_
203UCBN2A16.N_
203UCBN2A18.N_
203UCBN2A20.N_
203UCBN2A22.N_
203UCBN2A28.N_
203UCBN2A32.N_
203UCBN2A36.N_
203UCBN2A45.N_
203UCBN2A50.N_
203UCBN2A56.N_
204UCBN2A3.6N_
204UCBN2A5.0N_
204UCBN2A5.6N_
204UCBN2A6.3N_
204UCBN2A8.0N_
204UCBN2A9.0N_
204UCBN2A11.N_
204UCBN2A12.N_
204UCBN2A14.N_
204UCBN2A16.N_
204UCBN2A18.N_
204UCBN2A20.N_
204UCBN2A22.N_
204UCBN2A28.N_
204UCBN2A32.N_
204UCBN2A36.N_
204UCBN2A45.N_
204UCBN2A50.N_
204UCBN2A56.N_
205UCBN2A3.6N_
205UCBN2A5.0N_
205UCBN2A5.6N_
205UCBN2A6.3N_
205UCBN2A8.0N_
205UCBN2A9.0N_
205UCBN2A11.N_
205UCBN2A12.N_
205UCBN2A14.N_
205UCBN2A16.N_
205UCBN2A18.N_
205UCBN2A20.N_
205UCBN2A22.N_
205UCBN2A28.N_
4767329
4767333
4767336
4767339
4767342
4767345
4767348
4767351
4767354
4767357
4767360
4767363
4767366
4767369
4767372
4767375
4767378
4767381
4767384
4767388
4767392
4767396
4767400
4767404
4767408
4767412
4767416
4767420
4767424
4767428
4767432
4767435
4767438
4767441
4767444
4767447
4767450
4767453
4767457
4767461
4767465
4767469
4767473
4767477
4767481
Drive Ratio Exact
Size Code Ratio
32.
32.19
205
205
36.
35.28
205
45.
43.20
205
50.
48.15
205
56.
54.00
206
5.0
4.438
206
5.6
6.240
206
6.3
6.994
206
8.0
7.851
206
9.0
9.970
206
11.
11.30
206
12.
13.48
206
14.
15.52
206
16.
18.05
206
18.
20.20
206
20.
21.53
206
22.
25.51
206
28.
27.24
206
32.
33.80
206
36.
39.86
206
45.
43.64
206
50.
53.49
206
56.
59.61
206
63.
66.86
207
3.6
3.678
207
5.0
5.094
207
5.6
5.722
207
6.3
6.292
207
8.0
8.218
207
9.0
9.344
207
11.
11.35
207
12.
12.48
207
14.
14.34
207
16.
16.26
207
18.
17.94
207
20.
20.54
207
22.
23.23
207
28.
26.93
207
32.
32.12
207
36.
35.17
207
45.
42.21
207
50.
48.56
207
56.
53.96
Drive
Designation
Drive
Part No.
205UCBN2A32.N_
205UCBN2A36.N_
205UCBN2A45.N_
205UCBN2A50.N_
205UCBN2A56.N_
206UCBN2A5.0N_
206UCBN2A5.6N_
206UCBN2A6.3N_
206UCBN2A8.0N_
206UCBN2A9.0N_
206UCBN2A11.N_
206UCBN2A12.N_
206UCBN2A14.N_
206UCBN2A16.N_
206UCBN2A18.N_
206UCBN2A20.N_
206UCBN2A22.N_
206UCBN2A28.N_
206UCBN2A32.N_
206UCBN2A36.N_
206UCBN2A45.N_
206UCBN2A50.N_
206UCBN2A56.N_
206UCBN2A63.N_
207UCBN2A3.6N_
207UCBN2A5.0N_
207UCBN2A5.6N_
207UCBN2A6.3N_
207UCBN2A8.0N_
207UCBN2A9.0N_
207UCBN2A11.N_
207UCBN2A12.N_
207UCBN2A14.N_
207UCBN2A16.N_
207UCBN2A18.N_
207UCBN2A20.N_
207UCBN2A22.N_
207UCBN2A28.N_
207UCBN2A32.N_
207UCBN2A36.N_
207UCBN2A45.N_
207UCBN2A50.N_
207UCBN2A56.N_
4767485
4767489
4767493
4767497
4767501
4767504
4767507
4767510
4767513
4767516
4767519
4767523
4767527
4767531
4767535
4767539
4767543
4767547
4767551
4767555
4767559
4767563
4767567
4767570
4767574
4767578
4767582
4767586
4767590
4767594
4767599
4767604
4767609
4767614
4767619
4767624
4767629
4767634
4767639
4767644
4767649
4767654
4767659
Continued on next page
©Rexnord, 1998, 2013
UC – Gear Drive Part Numbers
Base Mounted – Double Reduction
Drive Ratio Exact
Drive
Drive
Size Code Ratio Designation Part No.
3.6
3.678 208UCBN2A3.6N_ 4767663
208
208
5.0
5.214 208UCBN2A5.0N_ 4767667
208
5.6
5.792 208UCBN2A5.6N_ 4767671
208
6.3
6.442 208UCBN2A6.3N_ 4767675
208
8.0
8.330 208UCBN2A8.0N_ 4767679
208
9.0
9.352 208UCBN2A9.0N_ 4767683
208
11.
11.47 208UCBN2A11.N_ 4767687
208
12.
12.92 208UCBN2A12.N_ 4767691
208
14.
15.04 208UCBN2A14.N_ 4767695
208
16.
16.69 208UCBN2A16.N_ 4767701
208
18.
18.26 208UCBN2A18.N_ 4767707
208
20.
20.66 208UCBN2A20.N_ 4767713
208
22.
23.32 208UCBN2A22.N_ 4767719
208
28.
28.27 208UCBN2A28.N_ 4767725
208
32.
32.97 208UCBN2A32.N_ 4767731
208
36.
36.21 208UCBN2A36.N_ 4767737
208
45.
44.38 208UCBN2A45.N_ 4767743
208
50.
48.46 208UCBN2A50.N_ 4767749
208
56.
55.80 208UCBN2A56.N_ 4767755
©Rexnord, 1998, 2013
Drive Ratio Exact
Size Code Ratio
09
09
09
09
09
09
09
09
09
09
09
09
09
09
09
09
09
09
09
09
09
09
09
09
09
09
09
09
09
09
09
09
09
1.4
1.8
2.2
2.5
2.8
3.2
3.6
4.0
4.5
5.0
5.6
6.3
7.1
8.0
9.0
10.
11.
12.
14.
16.
18.
20.
22.
25.
28.
32.
36.
40.
45.
50.
56.
63.
71.
1.479
2.036
2.282
2.562
2.969
3.301
3.688
4.088
4.582
5.073
5.686
6.628
7.404
8.224
9.188
10.270
11.710
12.740
14.530
16.590
18.430
20.590
22.870
26.040
28.740
32.310
35.670
40.250
44.440
49.070
55.180
61.130
68.740
Drive
Designation
Drive
Part No.
09UCBN2A1.4N_
09UCBN2A1.8N_
09UCBN2A2.2N_
09UCBN2A2.5N_
09UCBN2A2.8N_
09UCBN2A3.2N_
09UCBN2A3.6N_
09UCBN2A4.0N_
09UCBN2A4.5N_
09UCBN2A5.0N_
09UCBN2A5.6N_
09UCBN2A6.3N_
09UCBN2A7.1N_
09UCBN2A8.0N_
09UCBN2A9.0N_
09UCBN2A10.N_
09UCBN2A11.N_
09UCBN2A12.N_
09UCBN2A14.N_
09UCBN2A16.N_
09UCBN2A18.N_
09UCBN2A20.N_
09UCBN2A22.N_
09UCBN2A25.N_
09UCBN2A28.N_
09UCBN2A32.N_
09UCBN2A36.N_
09UCBN2A40.N_
09UCBN2A45.N_
09UCBN2A50.N_
09UCBN2A56.N_
09UCBN2A63.N_
09UCBN2A71.N_
4740662
4740666
4740670
4740674
4740678
4740682
4740686
4740690
4740694
4740698
4740702
4740706
4740710
4740714
4740718
4740722
4740726
4740730
4740734
4740740
4740746
4740752
4740758
4740764
4740770
4740776
4740782
4740788
4740794
4740800
4740806
4740812
4740818
Drive Ratio Exact
Size Code Ratio
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
1.4
1.8
2.2
2.5
2.8
3.2
3.6
4.0
4.5
5.0
5.6
6.3
7.1
8.0
9.0
10.
11.
12.
14.
16.
18.
20.
22.
25.
28.
32.
36.
40.
45.
50.
56.
63.
71.
1.442
2.015
2.191
2.489
2.992
3.242
3.500
4.179
4.545
4.938
5.370
6.742
7.260
7.945
8.578
10.590
11.980
12.510
14.160
16.430
18.250
19.410
21.570
26.030
29.990
30.760
35.440
37.060
42.700
47.930
51.490
57.750
62.050
Drive
Designation
Drive
Part No.
10UCBN2A1.4N_
10UCBN2A1.8N_
10UCBN2A2.2N_
10UCBN2A2.5N_
10UCBN2A2.8N_
10UCBN2A3.2N_
10UCBN2A3.6N_
10UCBN2A4.0N_
10UCBN2A4.5N_
10UCBN2A5.0N_
10UCBN2A5.6N_
10UCBN2A6.3N_
10UCBN2A7.1N_
10UCBN2A8.0N_
10UCBN2A9.0N_
10UCBN2A10.N_
10UCBN2A11.N_
10UCBN2A12.N_
10UCBN2A14.N_
10UCBN2A16.N_
10UCBN2A18.N_
10UCBN2A20.N_
10UCBN2A22.N_
10UCBN2A25.N_
10UCBN2A28.N_
10UCBN2A32.N_
10UCBN2A36.N_
10UCBN2A40.N_
10UCBN2A45.N_
10UCBN2A50.N_
10UCBN2A56.N_
10UCBN2A63.N_
10UCBN2A71.N_
4762934
4762938
4762942
4762946
4762950
4762954
4762958
4762962
4762966
4762970
4762974
4762978
4762982
4762986
4762990
4762994
4762998
4763002
4763006
4763012
4763018
4763024
4763030
4763036
4763042
4763048
4763054
4763060
4763066
4763072
4763078
4763084
4763090
(281-110) 83
UC – Gear Drive Part Numbers
Flange Mounted – Double Reduction
Drive Ratio Exact
Drive
Drive
Size Code Ratio Designation Part No.
3.6
3.750 201UCFN2A3.6N_ 4767759
201
201
5.0
5.066 201UCFN2A5.0N_ 4767763
201
5.6
5.762 201UCFN2A5.6N_ 4767767
201
6.3
6.528 201UCFN2A6.3N_ 4767771
201
8.0
8.348 201UCFN2A8.0N_ 4767775
201
9.0
8.997 201UCFN2A9.0N_ 4767779
201
11.
11.36 201UCFN2A11.N_ 4767782
201
12.
12.88 201UCFN2A12.N_ 4767785
201
14.
14.71 201UCFN2A14.N_ 4767788
201
16.
16.37 201UCFN2A16.N_ 4767791
201
18.
18.05 201UCFN2A18.N_ 4767794
201
20.
19.86 201UCFN2A20.N_ 4767797
201
22.
23.27 201UCFN2A22.N_ 4767800
201
28.
27.92 201UCFN2A28.N_ 4767803
201
32.
32.54 201UCFN2A32.N_ 4767806
201
36.
36.16 201UCFN2A36.N_ 4767809
201
45.
43.54 201UCFN2A45.N_ 4767812
201
50.
49.91 201UCFN2A50.N_ 4767815
201
56.
56.72 201UCFN2A56.N_ 4767818
202
3.6
3.589 202UCFN2A3.6N_ 4767822
202
5.0
5.034 202UCFN2A5.0N_ 4767826
202
5.6
5.547 202UCFN2A5.6N_ 4767830
202
6.3
6.299 202UCFN2A6.3N_ 4767834
202
8.0
8.000 202UCFN2A8.0N_ 4767838
202
9.0
9.088 202UCFN2A9.0N_ 4767842
202
11.
11.15 202UCFN2A11.N_ 4767846
202
12.
12.37 202UCFN2A12.N_ 4767850
202
14.
14.05 202UCFN2A14.N_ 4767854
202
16.
15.97 202UCFN2A16.N_ 4767857
202
18.
17.58 202UCFN2A18.N_ 4767860
202
20.
20.23 202UCFN2A20.N_ 4767863
202
22.
21.99 202UCFN2A22.N_ 4767866
202
28.
26.40 202UCFN2A28.N_ 4767869
202
32.
31.68 202UCFN2A32.N_ 4767872
202
36.
35.69 202UCFN2A36.N_ 4767875
202
45.
41.49 202UCFN2A45.N_ 4767878
202
50.
47.09 202UCFN2A50.N_ 4767881
202
56.
53.54 202UCFN2A56.N_ 4767884
203
3.6
3.589 203UCFN2A3.6N_ 4767888
203
5.0
5.034 203UCFN2A5.0N_ 4767892
203
5.6
5.547 203UCFN2A5.6N_ 4767896
203
6.3
6.299 203UCFN2A6.3N_ 4767900
203
8.0
8.000 203UCFN2A8.0N_ 4767904
203
9.0
9.088 203UCFN2A9.0N_ 4767908
203
11.
11.15 203UCFN2A11.N_ 4767912
84 (281-110)
Drive Ratio Exact
Drive
Drive
Size Code Ratio Designation Part No.
12.
12.37 203UCFN2A12.N_ 4767916
203
203
14.
14.05 203UCFN2A14.N_ 4767920
203
16.
15.97 203UCFN2A16.N_ 4767923
203
18.
17.58 203UCFN2A18.N_ 4767926
203
20.
20.23 203UCFN2A20.N_ 4767929
203
22.
21.99 203UCFN2A22.N_ 4767932
203
28.
26.40 203UCFN2A28.N_ 4767935
203
32.
31.68 203UCFN2A32.N_ 4767938
203
36.
35.69 203UCFN2A36.N_ 4767941
203
45.
41.49 203UCFN2A45.N_ 4767944
203
50.
47.09 203UCFN2A50.N_ 4767947
203
56.
53.54 203UCFN2A56.N_ 4767950
204
3.6
3.585 204UCFN2A3.6N_ 4767953
204
5.0
5.040 204UCFN2A5.0N_ 4767956
204
5.6
5.649 204UCFN2A5.6N_ 4767959
204
6.3
6.341 204UCFN2A6.3N_ 4767962
204
8.0
8.053 204UCFN2A8.0N_ 4767965
204
9.0
9.129 204UCFN2A9.0N_ 4767968
204
11.
10.89 204UCFN2A11.N_ 4767971
204
12.
12.54 204UCFN2A12.N_ 4767975
204
14.
14.58 204UCFN2A14.N_ 4767979
204
16.
16.31 204UCFN2A16.N_ 4767983
204
18.
17.39 204UCFN2A18.N_ 4767987
204
20.
20.61 204UCFN2A20.N_ 4767991
204
22.
22.00 204UCFN2A22.N_ 4767995
204
28.
27.30 204UCFN2A28.N_ 4768999
204
32.
32.19 204UCFN2A32.N_ 4768003
204
36.
35.25 204UCFN2A36.N_ 4768007
204
45.
43.20 204UCFN2A45.N_ 4768011
204
50.
48.15 204UCFN2A50.N_ 4768015
204
56.
54.00 204UCFN2A56.N_ 4768019
205
3.6
3.585 205UCFN2A3.6N_ 4768022
205
5.0
5.040 205UCFN2A5.0N_ 4768025
205
5.6
5.649 205UCFN2A5.6N_ 4768028
205
6.3
6.341 205UCFN2A6.3N_ 4768031
205
8.0
8.053 205UCFN2A8.0N_ 4768034
205
9.0
9.129 205UCFN2A9.0N_ 4768037
205
11.
10.89 205UCFN2A11.N_ 4768040
205
12.
12.54 205UCFN2A12.N_ 4768044
205
14.
14.58 205UCFN2A14.N_ 4768048
205
16.
16.31 205UCFN2A16.N_ 4768052
205
18.
17.39 205UCFN2A18.N_ 4768056
205
20.
20.61 205UCFN2A20.N_ 4768060
205
22.
22.00 205UCFN2A22.N_ 4768064
205
28.
27.30 205UCFN2A28.N_ 4768068
Drive Ratio Exact
Drive
Drive
Size Code Ratio Designation Part No.
32.
32.19 205UCFN2A32.N_ 4768072
205
205
36.
35.28 205UCFN2A36.N_ 4768076
205
45.
43.20 205UCFN2A45.N_ 4768080
205
50.
48.15 205UCFN2A50.N_ 4768084
205
56.
54.00 205UCFN2A56.N_ 4768088
206
5.0
4.438 206UCFN2A5.0N_ 4768091
206
5.6
6.240 206UCFN2A5.6N_ 4768094
206
6.3
6.994 206UCFN2A6.3N_ 4768097
206
8.0
7.851 206UCFN2A8.0N_ 4768100
206
9.0
9.970 206UCFN2A9.0N_ 4768103
206
11.
11.30 206UCFN2A11.N_ 4768106
206
12.
13.48 206UCFN2A12.N_ 4768110
206
14.
15.52 206UCFN2A14.N_ 4768114
206
16.
18.05 206UCFN2A16.N_ 4768118
206
18.
20.20 206UCFN2A18.N_ 4768122
206
20.
21.53 206UCFN2A20.N_ 4768126
206
22.
25.51 206UCFN2A22.N_ 4768130
206
28.
27.24 206UCFN2A28.N_ 4768134
206
32.
33.80 206UCFN2A32.N_ 4768138
206
36.
39.86 206UCFN2A36.N_ 4768142
206
45.
43.64 206UCFN2A45.N_ 4768146
206
50.
53.49 206UCFN2A50.N_ 4768150
206
56.
59.61 206UCFN2A56.N_ 4768154
206
63.
66.86 206UCFN2A63.N_ 4768157
207
3.6
3.678 207UCFN2A3.6N_ 4768161
207
5.0
5.094 207UCFN2A5.0N_ 4768165
207
5.6
5.722 207UCFN2A5.6N_ 4768169
207
6.3
6.292 207UCFN2A6.3N_ 4768173
207
8.0
8.218 207UCFN2A8.0N_ 4768177
207
9.0
9.344 207UCFN2A9.0N_ 4768181
207
11.
11.35 207UCFN2A11.N_ 4768186
207
12.
12.48 207UCFN2A12.N_ 4768191
207
14.
14.34 207UCFN2A14.N_ 4768196
207
16.
16.26 207UCFN2A16.N_ 4768201
207
18.
17.94 207UCFN2A18.N_ 4768206
207
20.
20.54 207UCFN2A20.N_ 4768211
207
22.
23.23 207UCFN2A22.N_ 4768216
207
28.
26.93 207UCFN2A28.N_ 4768221
207
32.
32.12 207UCFN2A32.N_ 4768226
207
36.
35.17 207UCFN2A36.N_ 4768231
207
45.
42.21 207UCFN2A45.N_ 4768236
207
50.
48.56 207UCFN2A50.N_ 4768241
207
56.
53.96 207UCFN2A56.N_ 4768246
Continued on next page
©Rexnord, 1998, 2013
UC – Gear Drive Part Numbers
Flange Mounted – Double Reduction
Drive Ratio Exact
Size Code Ratio
3.6
3.678
208
208
5.0
5.214
208
5.6
5.792
208
6.3
6.442
208
8.0
8.330
208
9.0
9.352
208
11.
11.47
208
12.
12.92
208
14.
15.04
208
16.
16.69
208
18.
18.26
208
20.
20.66
208
22.
23.32
208
28.
28.27
208
32.
32.97
208
36.
36.21
208
45.
44.38
208
50.
48.46
208
56.
55.80
©Rexnord, 1998, 2013
Drive
Designation
Drive
Part No.
208UCFN2A3.6N_
208UCFN2A5.0N_
208UCFN2A5.6N_
208UCFN2A6.3N_
208UCFN2A8.0N_
208UCFN2A9.0N_
208UCFN2A11.N_
208UCFN2A12.N_
208UCFN2A14.N_
208UCFN2A16.N_
208UCFN2A18.N_
208UCFN2A20.N_
208UCFN2A22.N_
208UCFN2A28.N_
208UCFN2A32.N_
208UCFN2A36.N_
208UCFN2A45.N_
208UCFN2A50.N_
208UCFN2A56.N_
4768250
4768254
4768258
4768262
4768266
4768270
4768274
4768278
4768282
4768288
4768294
4768300
4768306
4768312
4768318
4768324
4768330
4768336
4768342
Drive Ratio Exact
Size Code Ratio
1.4
1.479
09
09
1.8
2.036
09
2.2
2.282
09
2.5
2.562
09
2.8
2.969
09
3.2
3.301
09
3.6
3.688
09
4.0
4.088
09
4.5
4.582
09
5.0
5.073
09
5.6
5.686
09
6.3
6.628
09
7.1
7.404
09
8.0
8.224
09
9.0
9.188
09
10. 10.270
09
11. 11.710
09
12. 12.740
09
14. 14.530
09
16. 16.590
09
18. 18.430
09
20. 20.590
09
22. 22.870
09
25. 26.040
09
28. 28.740
09
32. 32.310
09
36. 35.670
09
40. 40.250
09
45. 44.440
09
50. 49.070
09
56. 55.180
09
63. 61.130
09
71. 68.740
Drive
Designation
Drive
Part No.
09UCFN2A1.4N_
09UCFN2A1.8N_
09UCFN2A2.2N_
09UCFN2A2.5N_
09UCFN2A2.8N_
09UCFN2A3.2N_
09UCFN2A3.6N_
09UCFN2A4.0N_
09UCFN2A4.5N_
09UCFN2A5.0N_
09UCFN2A5.6N_
09UCFN2A6.3N_
09UCFN2A7.1N_
09UCFN2A8.0N_
09UCFN2A9.0N_
09UCFN2A10.N_
09UCFN2A11.N_
09UCFN2A12.N_
09UCFN2A14.N_
09UCFN2A16.N_
09UCFN2A18.N_
09UCFN2A20.N_
09UCFN2A22.N_
09UCFN2A25.N_
09UCFN2A28.N_
09UCFN2A32.N_
09UCFN2A36.N_
09UCFN2A40.N_
09UCFN2A45.N_
09UCFN2A50.N_
09UCFN2A56.N_
09UCFN2A63.N_
09UCFN2A71.N_
4741481
4741485
4741489
4741493
4741497
4741501
4741505
4741509
4741513
4741517
4741521
4741525
4741529
4741533
4741537
4741541
4741545
4741549
4741553
4741559
4741565
4741571
4741577
4741583
4741589
4741595
4741601
4741607
4741613
4741619
4741625
4741631
4741637
Drive Ratio Exact
Size Code Ratio
1.4
1.442
10
10
1.8
2.015
10
2.2
2.191
10
2.5
2.489
10
2.8
2.992
10
3.2
3.242
10
3.6
3.500
10
4.0
4.179
10
4.5
4.545
10
5.0
4.938
10
5.6
5.370
10
6.3
6.742
10
7.1
7.260
10
8.0
7.945
10
9.0
8.578
10
10. 10.590
10
11. 11.980
10
12. 12.510
10
14. 14.160
10
16. 16.430
10
18. 18.250
10
20. 19.410
10
22. 21.570
10
25. 26.030
10
28. 29.990
10
32. 30.760
10
36. 35.440
10
40. 37.060
10
45. 42.700
10
50. 47.930
10
56. 51.490
10
63. 57.750
10
71. 62.050
Drive
Designation
Drive
Part No.
10UCFN2A1.4N_
10UCFN2A1.8N_
10UCFN2A2.2N_
10UCFN2A2.5N_
10UCFN2A2.8N_
10UCFN2A3.2N_
10UCFN2A3.6N_
10UCFN2A4.0N_
10UCFN2A4.5N_
10UCFN2A5.0N_
10UCFN2A5.6N_
10UCFN2A6.3N_
10UCFN2A7.1N_
10UCFN2A8.0N_
10UCFN2A9.0N_
10UCFN2A10.N_
10UCFN2A11.N_
10UCFN2A12.N_
10UCFN2A14.N_
10UCFN2A16.N_
10UCFN2A18.N_
10UCFN2A20.N_
10UCFN2A22.N_
10UCFN2A25.N_
10UCFN2A28.N_
10UCFN2A32.N_
10UCFN2A36.N_
10UCFN2A40.N_
10UCFN2A45.N_
10UCFN2A50.N_
10UCFN2A56.N_
10UCFN2A63.N_
10UCFN2A71.N_
4763178
4763182
4763186
4763190
4763194
4763198
4763202
4763206
4763210
4763214
4763218
4763222
4763226
4763230
4763234
4763238
4763242
4763246
4763250
4763256
4763262
4763268
4763274
4763280
4763286
4763292
4763298
4763304
4763310
4763316
4763322
4763328
4763334
(281-110) 85
UC – Gear Drive Part Numbers
Base Mounted – Triple Reduction
Drive Ratio Exact
Drive
Drive
Size Code Ratio
Designation Part No.
56.
58.46 201UCBN3A56.N_ 4768346
201
201
63.
64.45 201UCBN3A63.N_ 4768349
201
71.
70.93 201UCBN3A71.N_ 4768352
201
80.
83.10 201UCBN3A80.N_ 4768355
201 100 99.70 201UCBN3A100N_ 4768358
201 112 116.2 201UCBN3A112N_ 4768361
201 125 129.1 201UCBN3A125N_ 4768364
201 160 155.5 201UCBN3A160N_ 4768367
201 180 178.2 201UCBN3A180N_ 4768370
201 200 202.6 201UCBN3A200N_ 4768373
202
56.
57.03 202UCBN3A56.N_ 4768376
202
63.
62.87 202UCBN3A63.N_ 4768379
202
71.
69.19 202UCBN3A71.N_ 4768382
202
80.
81.07 202UCBN3A80.N_ 4768385
202 100 97.26 202UCBN3A100N_ 4768388
202 112 113.4 202UCBN3A112N_ 4768391
202 125 126.0 202UCBN3A125N_ 4768394
202 160 151.7 202UCBN3A160N_ 4768397
202 180 173.9 202UCBN3A180N_ 4768400
202 200 197.6 202UCBN3A200N_ 4768403
203
56.
57.03 203UCBN3A56.N_ 4768406
203
63.
62.87 203UCBN3A63.N_ 4768409
203
71.
69.19 203UCBN3A71.N_ 4768412
203
80.
81.07 203UCBN3A80.N_ 4768142
203 100 97.26 203UCBN3A100N_ 4768418
203 112 113.4 203UCBN3A112N_ 4768421
203 125 126.0 203UCBN3A125N_ 4768424
203 160 151.7 203UCBN3A160N_ 4768427
203 180 173.9 203UCBN3A180N_ 4768430
203 200 197.6 203UCBN3A200N_ 4768433
204
56.
58.38 204UCBN3A56.N_ 4768437
204
63.
64.29 204UCBN3A63.N_ 4768441
204
71.
73.95 204UCBN3A71.N_ 4768445
204
80.
80.40 204UCBN3A80.N_ 4768449
204 100 96.52 204UCBN3A100N_ 4768452
204 112 115.8 204UCBN3A112N_ 4768455
204 125 130.5 204UCBN3A125N_ 4768458
204 160 151.7 204UCBN3A160N_ 4768461
204 180 172.2 204UCBN3A180N_ 4768464
204 200 195.8 204UCBN3A200N_ 4768467
Drive Ratio Exact
Size Code Ratio
56.
58.38
205
205
63.
64.29
205
71.
73.95
205
80.
80.40
205 100 96.52
205 112 115.8
205 125 130.5
205 160 151.7
205 180 172.2
205 200 195.8
206
63.
72.28
206
71.
79.60
206
80.
91.56
206 100 99.54
206 112 119.5
206 125 143.4
206 160 161.6
206 180 187.8
206 200 213.2
206 225 242.4
207
56.
58.95
207
63.
62.83
207
71.
74.47
207
80.
79.51
207 100 98.66
207 112 116.3
207 125 127.4
207 160 156.1
207 180 174.0
207 200 195.2
208
56.
60.33
208
63.
66.02
208
71.
74.69
208
80.
84.31
208 100 102.2
208 112 119.2
208 125 130.9
208 160 160.4
208 180 175.2
208 200 201.8
Drive
Designation
Drive
Part No.
205UCBN3A56.N_
205UCBN3A63.N_
205UCBN3A71.N_
205UCBN3A80.N_
205UCBN3A100N_
205UCBN3A112N_
205UCBN3A125N_
205UCBN3A160N_
205UCBN3A180N_
205UCBN3A200N_
206UCBN3A63.N_
206UCBN3A71.N_
206UCBN3A80.N_
206UCBN3A100N_
206UCBN3A112N_
206UCBN3A125N_
206UCBN3A160N_
206UCBN3A180N_
206UCBN3A200N_
206UCBN3A225N_
207UCBN3A56.N_
207UCBN3A63.N_
207UCBN3A71.N_
207UCBN3A80.N_
207UCBN3A100N_
207UCBN3A112N_
207UCBN3A125N_
207UCBN3A160N_
207UCBN3A180N_
207UCBN3A200N_
208UCBN3A56.N_
208UCBN3A63.N_
208UCBN3A71.N_
208UCBN3A80.N_
208UCBN3A100N_
208UCBN3A112N_
208UCBN3A125N_
208UCBN3A160N_
208UCBN3A180N_
208UCBN3A200N_
4768471
4768475
4768479
4768483
4768486
4768489
4768492
4768495
4768498
4768501
4768505
4768509
4768513
4768517
4768520
4768523
4768526
4768529
4768532
4768535
4768539
4768543
4768547
4768551
4768555
4768559
4768563
4768567
4768571
4768575
4768579
4768583
4768587
4768591
4768595
4768599
4768603
4768607
4768611
4768615
Drive Ratio Exact
Drive
Drive
Size Code Ratio Designation Part No.
56.
59.85 09UCBN3A56.N_ 4741936
09
09
63.
66.49 09UCBN3A63.N_ 4741940
09
71.
74.26 09UCBN3A71.N_ 4741944
09
80.
82.51 09UCBN3A80.N_ 4741948
09
90.
93.92 09UCBN3A90.N_ 4741952
09
100
103.7 09UCBN3A100N_ 4741956
09
112
116.5 09UCBN3A112N_ 4741960
09
125
128.7 09UCBN3A125N_ 4741964
09
140
145.2 09UCBN3A140N_ 4741968
09
160
160.3 09UCBN3A160N_ 4741972
09
180
177.0 09UCBN3A180N_ 4741976
09
200
199.0 09UCBN3A200N_ 4741980
09
225
220.5 09UCBN3A225N_ 4741984
09
250
248.0 09UCBN3A250N_ 4741988
10
56.
60.23 10UCBN3A56.N_ 4763096
10
63.
66.93 10UCBN3A63.N_ 4763102
10
71.
71.17 10UCBN3A71.N_ 4763108
10
80.
79.08 10UCBN3A80.N_ 4763114
10
90.
95.44 10UCBN3A90.N_ 4763120
10
100
110.0 10UCBN3A100N_ 4763126
10
112
112.8 10UCBN3A112N_ 4763132
10
125
129.9 10UCBN3A125N_ 4763138
10
140
135.9 10UCBN3A140N_ 4763144
10
160
156.6 10UCBN3A160N_ 4763150
10
180
175.7 10UCBN3A180N_ 4763156
10
200
188.8 10UCBN3A200N_ 4763162
10
225
211.8 10UCBN3A225N_ 4763168
10
250
227.5 10UCBN3A250N_ 4763174
Base Mounted – Quad. & Quint. Reduction
Contact factory for part number and ratings.
86 (281-110)
©Rexnord, 1998, 2013
UC – Gear Drive Part Numbers
Flange Mounted – Triple Reduction
Drive Ratio Exact
Drive
Drive
Size Code Ratio Designation Part No.
56.
58.46 201UCFN3A56.N_ 4768618
201
201
63.
64.45 201UCFN3A63.N_ 4768621
201
71.
70.93 201UCFN3A71.N_ 4768624
201
80.
83.10 201UCFN3A80.N_ 4768627
201
100
99.70 201UCFN3A100N_ 4768630
201
112
116.2 201UCFN3A112N_ 4768633
201
125
129.1 201UCFN3A125N_ 4768636
201
160
155.5 201UCFN3A160N_ 4768639
201
180
178.2 201UCFN3A180N_ 4768642
201
200
202.6 201UCFN3A200N_ 4768645
202
56.
57.03 202UCFN3A56.N_ 4768648
202
63.
62.87 202UCFN3A63.N_ 4768651
202
71.
69.19 202UCFN3A71.N_ 4768654
202
80.
81.07 202UCFN3A80.N_ 4768657
202
100
97.26 202UCFN3A100N_ 4768660
202
112
113.4 202UCFN3A112N_ 4768663
202
125
126.0 202UCFN3A125N_ 4768666
202
160
151.7 202UCFN3A160N_ 4768669
202
180
173.9 202UCFN3A180N_ 4768672
202
200
197.6 202UCFN3A200N_ 4768675
203
56.
57.03 203UCFN3A56.N_ 4768678
203
63.
62.87 203UCFN3A63.N_ 4768681
203
71.
69.19 203UCFN3A71.N_ 4768684
203
80.
81.07 203UCFN3A80.N_ 4768687
203
100
97.26 203UCFN3A100N_ 4768690
203
112
113.4 203UCFN3A112N_ 4768693
203
125
126.0 203UCFN3A125N_ 4768696
203
160
151.7 203UCFN3A160N_ 4768699
203
180
173.9 203UCFN3A180N_ 4768702
203
200
197.6 203UCFN3A200N_ 4768705
204
56.
58.38 204UCFN3A56.N_ 4768709
204
63.
64.29 204UCFN3A63.N_ 4768713
204
71.
73.95 204UCFN3A71.N_ 4768717
204
80.
80.40 204UCFN3A80.N_ 4768721
204
100
96.52 204UCFN3A100N_ 4768724
204
112
115.8 204UCFN3A112N_ 4768727
204
125
130.5 204UCFN3A125N_ 4768730
204
160
151.7 204UCFN3A160N_ 4768733
204
180
172.2 204UCFN3A180N_ 4768736
204
200
195.8 204UCFN3A200N_ 4768739
Drive Ratio Exact
Drive
Drive
Size Code Ratio Designation Part No.
56.
58.38 205UCFN3A56.N_ 4768743
205
205
63.
64.29 205UCFN3A63.N_ 4768747
205
71.
73.95 205UCFN3A71.N_ 4768751
205
80.
80.40 205UCFN3A80.N_ 4768755
205
100
96.52 205UCFN3A100N_ 4768758
205
112
115.8 205UCFN3A112N_ 4768761
205
125
130.5 205UCFN3A125N_ 4768764
205
160
151.7 205UCFN3A160N_ 4768767
205
180
172.2 205UCFN3A180N_ 4768770
205
200
195.8 205UCFN3A200N_ 4768773
206
63.
72.28 206UCFN3A63.N_ 4768777
206
71.
79.60 206UCFN3A71.N_ 4768781
206
80.
91.56 206UCFN3A80.N_ 4768785
206
100
99.54 206UCFN3A100N_ 4768789
206
112
119.5 206UCFN3A112N_ 4768792
206
125
143.4 206UCFN3A125N_ 4768795
206
160
161.6 206UCFN3A160N_ 4768798
206
180
187.8 206UCFN3A180N_ 4768801
206
200
213.2 206UCFN3A200N_ 4768804
206
225
242.4 206UCFN3A225N_ 4768807
207
56.
58.95 207UCFN3A56.N_ 4768811
207
63.
62.83 207UCFN3A63.N_ 4768815
207
71.
74.47 207UCFN3A71.N_ 4768819
207
80.
79.51 207UCFN3A80.N_ 4768823
207
100
98.66 207UCFN3A100N_ 4768827
207
112
116.3 207UCFN3A112N_ 4768831
207
125
127.4 207UCFN3A125N_ 4768835
207
160
156.1 207UCFN3A160N_ 4768839
207
180
174.0 207UCFN3A180N_ 4768843
207
200
195.2 207UCFN3A200N_ 4768847
208
56.
60.33 208UCFN3A56.N_ 4768851
208
63.
66.02 208UCFN3A63.N_ 4768855
208
71.
74.69 208UCFN3A71.N_ 4768859
208
80.
84.31 208UCFN3A80.N_ 4768863
208
100
102.2 208UCFN3A100N_ 4768867
208
112
119.2 208UCFN3A112N_ 4768871
208
125
130.9 208UCFN3A125N_ 4768875
208
160
160.4 208UCFN3A160N_ 4768879
208
180
175.2 208UCFN3A180N_ 4768883
208
200
201.8 208UCFN3A200N_ 4768887
Drive Ratio Exact
Drive
Drive
Size Code Ratio Designation Part No.
56.
59.85 09UCFN3A56.N_ 4742286
09
09
63.
66.49 09UCFN3A63.N_ 4742290
09
71.
74.26 09UCFN3A71.N_ 4742294
09
80.
82.51 09UCFN3A80.N_ 4742298
09
90.
93.92 09UCFN3A90.N_ 4742302
09
100
103.7 09UCFN3A100N_ 4742306
09
112
116.5 09UCFN3A112N_ 4742310
09
125
128.7 09UCFN3A125N_ 4742314
09
140
145.2 09UCFN3A140N_ 4742318
09
160
160.3 09UCFN3A160N_ 4742322
09
180
177.0 09UCFN3A180N_ 4742326
09
200
199.0 09UCFN3A200N_ 4742330
09
225
220.5 09UCFN3A225N_ 4742334
09
250
248.0 09UCFN3A250N_ 4742338
10
56.
60.23 10UCFN3A56.N_ 4763340
10
63.
66.93 10UCFN3A63.N_ 4763346
10
71.
71.17 10UCFN3A71.N_ 4763352
10
80.
79.08 10UCFN3A80.N_ 4763358
10
90.
95.44 10UCFN3A90.N_ 4763364
10
100
110.0 10UCFN3A100N_ 4763370
10
112
112.8 10UCFN3A112N_ 4763376
10
125
129.9 10UCFN3A125N_ 4763382
10
140
135.9 10UCFN3A140N_ 4763388
10
160
156.6 10UCFN3A160N_ 4763394
10
180
175.7 10UCFN3A180N_ 4763400
10
200
188.8 10UCFN3A200N_ 4763406
10
225
211.8 10UCFN3A225N_ 4763412
10
250
227.5 10UCFN3A250N_ 4763418
Flange Mounted – Quad. & Quint. Reduction
Contact factory for part number and ratings.
©Rexnord, 1998, 2013
(281-110) 87
Type UC Double Reduction Gear Drive
Sizes 201 – 10 — Dimensions – Inches
Base Mounted
C
X - CLEARANCE
S
R
LOW SPEED
SHAFT KEY
U
HIGH SPEED
SHAFT KEY
NA
N
UA
O
V
D
TAPPED HOLE
LB - DIA UNF
LC - DEPTH
J
4 - HOLES
H - DIA
G
Q
E
A
SIZE

201
202
203
204
205
206
207
09
10
F
TAPPED HOLE
L - DIA UNF
LA - DEPTH
P
B
A
B
C
D
E
F
G
H
J
L
LA
LB
LC
5.31
5.71
5.71
7.48
7.48
8.27
9.06
13.39
15.75
5.16
5.98
5.98
7.87
7.87
9.25
9.65
14.37
17.32
11.26
12.48
12.48
14.53
14.92
15.75
17.32
25.98
30.79
2.95
3.54
3.54
4.53
4.53
5.12
5.51
8.86
9.84
4.33
4.33
4.33
5.31
5.31
5.91
6.69
9.84
11.42
4.33
5.12
5.12
6.50
6.50
7.68
8.07
12.20
14.57
0.47
0.63
0.63
0.79
0.79
0.94
0.98
1.57
1.77
0.39
0.39
0.39
0.59
0.59
0.59
0.75
0.91
1.06
0.98
1.38
1.38
2.17
2.17
2.36
2.36
3.54
4.33
0.250
0.250
0.250
0.375
0.375
0.375
0.625
0.750
0.750
0.63
0.71
0.71
0.86
0.75
0.75
1.25
1.65
1.65
0.250
0.250
0.250
0.250
0.250
0.250
0.313
0.500
0.625
0.63
0.63
0.63
0.63
0.63
0.63
0.63
1.10
1.42
SIZE

N
NA
O
P
Q
R
S
201
202
203
204
205
206
207
208
09
10
1.575
1.969
1.969
2.362
2.756
2.756
3.150
3.937
4.720
5.510
1.570
1.570
1.570
1.570
1.570
1.570
1.970
2.360
3.150
4.330
5.87
7.09
7.09
8.19
8.19
8.43
9.84
12.20
15.51
17.56
4.65
4.41
4.38
4.49
4.48
4.13
4.72
6.10
7.48
8.94
2.28
2.95
2.95
3.54
3.94
3.94
4.53
5.51
6.30
7.28
2.99
3.31
3.31
3.82
3.82
4.33
4.69
6.57
7.87
8.86
2.99
3.38
3.38
4.21
4.21
4.33
5.23
6.03
6.78
7.99
Low Speed Shaft
High Speed Shaft
U‡
Key
UA †
Key
0.7500
1.0000
1.0000
1.2500
1.3750
1.3750
1.6250
2.1250
2.3750
2.8750
.1875 x .1875 x 1.2812
.2500 x .2500 x 1.5625
.2500 x .2500 x 1.5625
.2500 x .2500 x 2.0000
.3125 x .3125 x 2.3750
.3125 x .3125 x 2.3750
.3750 X .3750 X 2.3750
.5000 X .5000 X 2.7500
.6250 X .6250 X 3.6875
.7500 X .7500 X 4.6250
0.6250
0.6250
0.6250
0.7500
0.7500
0.7500
0.8750
1.1250
1.3750
1.6250
.1875 x .1875 x 1.2812
.1875 x .1875 x 1.2812
.1875 x .1875 x 1.2812
.1875 x .1875 x 1.2812
.1875 x .1875 x 1.2812
.1875 x .1875 x 1.2812
.1875 x .1875 x 1.2812
.2500 x .2500 x 2.0000
.3125 x .3125 x 2.4062
.3750 X .3750 X 3.6875
V
X
...
...
...
...
...
0.57
...
...
...
...
...
...
...
...
...
1.26
1.77
1.97
1.54
2.32
‡‡ Sizes 201 thru 206 tolerance is +.0000, –.0005; Sizes 207 thru 10 tolerance is +.0000, –.0010.
†† Sizes 201 thru 09 tolerance is +.0000, –.0005; Size 10 tolerance is +.0000, –.0010.
++ Refer tp Page 4 for General Information and Reference Notes.
88 (281-110)
©Rexnord, 1998, 2013
Type UC Triple Reduction Gear Drive
Sizes 201 – 10 — Dimensions – Inches
Base Mounted
C
X - CLEARANCE
S
R
LOW SPEED
SHAFT KEY
U
HIGH SPEED
SHAFT KEY
NA
N
UA
O
V
D
TAPPED HOLE
LB - DIA UNF
LC - DEPTH
J
4 - HOLES
H - DIA
G
Q
E
SIZE

201
202
203
204
205
206
207
208
09
10
F
TAPPED HOLE
L - DIA UNF
LA - DEPTH
A
P
B
A
B
C
D
E
F
G
H
J
L
LA
LB
LC
5.31
5.71
5.71
7.48
7.48
8.27
9.06
11.42
13.39
15.75
5.16
5.98
5.98
7.87
7.87
9.25
9.65
12.20
14.37
17.32
11.26
12.48
12.48
14.53
14.92
15.75
17.32
21.85
25.98
30.79
2.95
3.54
3.54
4.53
4.53
5.12
5.51
7.09
8.86
9.84
4.33
4.33
4.33
5.31
5.31
5.91
6.69
8.46
9.84
11.42
4.33
5.12
5.12
6.50
6.50
7.68
8.07
10.24
12.20
14.57
0.47
0.63
0.63
0.79
0.79
0.94
0.98
1.38
1.57
1.77
0.39
0.39
0.39
0.59
0.59
0.59
0.75
0.75
0.91
1.06
0.98
1.38
1.38
2.17
2.17
2.36
2.36
2.95
3.54
4.33
0.250
0.250
0.250
0.375
0.375
0.375
0.625
0.750
0.750
0.750
0.63
0.71
0.71
0.86
0.75
0.75
1.25
1.50
1.65
1.65
0.250
0.250
0.250
0.250
0.250
0.250
0.313
0.375
0.500
0.625
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.87
1.10
1.42
SIZE

N
NA
O
P
Q
R
S
201
202
203
204
205
206
207
208
1.575
1.969
1.969
2.362
2.756
2.756
3.150
3.937
4.720
5.510
1.570
1.570
1.570
1.570
1.570
1.570
1.970
2.360
3.150
4.330
5.87
7.09
7.09
8.19
8.19
8.43
9.84
12.20
15.51
17.56
4.65
4.41
4.38
4.49
4.48
4.13
4.72
6.10
7.48
8.94
2.28
2.95
2.95
3.54
3.94
3.94
4.53
5.51
6.30
7.28
2.99
3.31
3.31
3.82
3.82
4.33
4.69
6.57
7.87
8.86
2.99
3.38
3.38
4.21
4.21
4.33
5.23
6.03
6.78
7.99
09
10
‡‡ Sizes 201 thru 206 tolerance is +.0000, –.0005; Sizes 207 thru 10 tolerance is +.0000, –.0010.
†† Sizes 201 thru 09 tolerance is +.0000, –.0005; Size 10 tolerance is +.0000, –.0010.
++ Refer tp Page 4 for General Information and Reference Notes.
©Rexnord, 1998, 2013
U‡
0.7500
1.0000
1.0000
1.2500
1.3750
1.3750
1.6250
2.1250
2.3750
2.8750
Low Speed Shaft
Key
.1875 x .1875 x 1.2812
.2500 x .2500 x 1.5625
.2500 x .2500 x 1.5625
.2500 x .2500 x 2.0000
.3125 x .3125 x 2.3750
.3125 x .3125 x 2.3750
.3750 X .3750 X 2.3750
.5000 X .5000 X 2.7500
.6250 X .6250 X 3.6875
.7500 X .7500 X 4.6250
UA †
0.6250
0.6250
0.6250
0.6250
0.6250
0.6250
0.7500
0.8750
1.1250
1.3750
High Speed Shaft
Key
.1875 x .1875 x 1.2812
.1875 x .1875 x 1.2812
.1875 x .1875 x 1.2812
.1875 x .1875 x 1.2812
.1875 x .1875 x 1.2812
.1875 x .1875 x 1.2812
.1875 x .1875 x 1.2812
.1875 x .1875 x 1.2812
.2500 x .2500 x 2.0000
.3125 x .3125 x 2.4062
V
X
...
...
...
...
...
0.57
...
...
...
...
...
...
...
...
...
1.26
1.77
1.97
1.54
2.32
(281-110) 89
Type UC Quadruple Reduction Gear Drive
Sizes 203 – 10 — Dimensions – Inches
Base Mounted
C
X - CLEARANCE
S
R
HIGH SPEED
SHAFT KEY
LOW SPEED
SHAFT KEY
N
U
NA
UA
O
V
D
J
4 - HOLES
H - DIA
SIZE

203
204
205
206
207
208
09
10
TAPPED HOLE
LB - DIA UNF
LC - DEPTH
G
E
Q
A
P
F
TAPPED HOLE
L - DIA UNF
LA - DEPTH
B
A
B
C
D
E
F
G
H
J
L
LA
LB
LC
5.71
7.48
7.48
8.27
9.06
11.42
13.39
15.75
5.98
7.87
7.87
9.25
9.65
12.20
14.37
17.32
19.80
22.48
22.87
23.70
25.16
29.57
32.76
37.64
3.54
4.53
4.53
5.12
5.51
7.09
8.86
9.84
4.33
5.31
5.31
5.91
6.69
8.46
9.84
11.42
5.12
6.50
6.50
7.68
8.07
10.24
12.20
14.57
0.63
0.79
0.79
0.94
0.98
1.38
1.57
1.77
0.39
0.59
0.59
0.59
0.75
0.75
0.91
1.06
1.38
2.17
2.17
2.36
2.36
2.95
3.54
4.33
0.250
0.375
0.375
0.375
0.625
0.750
0.750
0.750
0.71
0.86
0.75
0.75
1.25
1.50
1.65
1.65
0.250
0.250
0.250
0.250
0.250
0.250
0.250
0.313
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.63
SIZE

N
NA
O
P
Q
R
S
203
204
205
206
207
208
09
10
1.969
2.362
2.756
2.756
3.150
3.937
4.720
5.510
1.570
1.570
1.570
1.570
1.750
1.750
1.750
1.970
7.09
8.19
8.19
8.43
9.84
12.20
15.51
17.56
11.73
12.44
12.43
12.08
12.56
13.82
14.26
15.79
2.95
3.54
3.94
3.94
4.53
5.51
6.30
7.28
3.31
3.82
3.82
4.33
4.69
6.57
7.87
8.86
3.38
4.21
4.21
4.33
5.23
6.03
6.78
7.99
U‡
1.0000
1.2500
1.3750
1.3750
1.6250
2.1250
2.3750
2.8750
Low Speed Shaft
Key
.2500 x .2500 x 1.5625
.2500 x .2500 x 2.0000
.3125 x .3125 x 2.3750
.3125 x .3125 x 2.3750
.3750 X .3750 X 2.3750
.5000 X .5000 X 2.7500
.6250 X .6250 X 3.6875
.7500 X .7500 X 4.6250
UA †
0.6250
0.6250
0.6250
0.6250
0.6250
0.7500
0.7500
0.8750
High Speed Shaft
Key
.1875 x .1875 x 1.2812
.1875 x .1875 x 1.2812
.1875 x .1875 x 1.2812
.1875 x .1875 x 1.2812
.1875 x .1875 x 1.2812
.1875 x .1875 x 1.2812
.1875 x .1875 x 1.2812
.1875 x .1875 x 1.2812
V
X
...
...
...
0.57
...
...
...
...
...
...
...
1.26
1.77
1.97
1.54
2.32
‡‡ Sizes 203 thru 206 tolerance is +.0000, –.0005; Sizes 207 thru 10 tolerance is +.0000, –.0010.
†† Sizes 203 thru 10 tolerance is +.0000, –.0005.
++ Refer tp Page 4 for General Information and Reference Notes.
90 (281-110)
©Rexnord, 1998, 2013
Type UC Quintuple Reduction Gear Drive
Sizes 203 – 10 — Dimensions – Inches
Base Mounted
C
X - CLEARANCE
S
R
HIGH SPEED
SHAFT KEY
LOW SPEED
SHAFT KEY
N
U
NA
UA
O
V
D
J
4 - HOLES
H - DIA
SIZE

203
204
205
206
207
208
09
10
TAPPED HOLE
LB - DIA UNF
LC - DEPTH
G
E
Q
A
P
F
TAPPED HOLE
L - DIA UNF
LA - DEPTH
B
A
B
C
D
E
F
G
H
J
L
LA
LB
LC
5.71
7.48
7.48
8.27
9.06
11.42
13.39
15.75
5.98
7.87
7.87
9.25
9.65
12.20
14.37
17.32
19.80
22.48
22.87
23.70
25.16
29.57
32.76
37.64
3.54
4.53
4.53
5.12
5.51
7.09
8.86
9.84
4.33
5.31
5.31
5.91
6.69
8.46
9.84
11.42
5.12
6.50
6.50
7.68
8.07
10.24
12.20
14.57
0.63
0.79
0.79
0.94
0.98
1.38
1.57
1.77
0.39
0.59
0.59
0.59
0.75
0.75
0.91
1.06
1.38
2.17
2.17
2.36
2.36
2.95
3.54
4.33
0.250
0.375
0.375
0.375
0.625
0.750
0.750
0.750
0.71
0.86
0.75
0.75
1.25
1.50
1.65
1.65
0.250
0.250
0.250
0.250
0.250
0.250
0.250
0.313
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.63
SIZE

N
NA
O
P
Q
R
S
203
204
205
206
207
208
09
10
1.969
2.362
2.756
2.756
3.150
3.937
4.720
5.510
1.570
1.570
1.570
1.570
1.750
1.750
1.750
1.970
7.09
8.19
8.19
8.43
9.84
12.20
15.51
17.56
11.73
12.44
12.43
12.08
12.56
13.82
14.26
15.79
2.95
3.54
3.94
3.94
4.53
5.51
6.30
7.28
3.31
3.82
3.82
4.33
4.69
6.57
7.87
8.86
3.38
4.21
4.21
4.33
5.23
6.03
6.78
7.99
Low Speed Shaft
High Speed Shaft
U‡
Key
UA †
Key
1.0000
1.2500
1.3750
1.3750
1.6250
2.1250
2.3750
2.8750
.2500 x .2500 x 1.5625
.2500 x .2500 x 2.0000
.3125 x .3125 x 2.3750
.3125 x .3125 x 2.3750
.3750 X .3750 X 2.3750
.5000 X .5000 X 2.7500
.6250 X .6250 X 3.6875
.7500 X .7500 X 4.6250
0.6250
0.6250
0.6250
0.6250
0.6250
0.7500
0.7500
0.8750
.1875 x .1875 x 1.2812
.1875 x .1875 x 1.2812
.1875 x .1875 x 1.2812
.1875 x .1875 x 1.2812
.1875 x .1875 x 1.2812
.1875 x .1875 x 1.2812
.1875 x .1875 x 1.2812
.1875 x .1875 x 1.2812
V
X
...
...
...
0.57
...
...
...
...
...
...
...
1.26
1.77
1.97
1.54
2.32
‡‡ Sizes 203 thru 206 tolerance is +.0000, –.0005; Sizes 207 thru 10 tolerance is +.0000, –.0010.
†† Sizes 203 thru 10 tolerance is +.0000, –.0005.
++ Refer tp Page 4 for General Information and Reference Notes.
©Rexnord, 1998, 2013
(281-110) 91
Type UC Double Reduction Gearmotor
Sizes 201-10 — Dimensions – Inches
Flange Mounted
C
SIZES 09 & 10
SIZES 201 - 208
X - CLEARANCE
HIGH SPEED
SHAFT KEY
NA
U
MA
N
UA
A BB
YA - BOLT
CIRCLE
SIZE A  BB

C
G
L
LA
LB
LC
M
MA
V
TAPPED HOLE
LB - DIA UNF
LC - DEPTH
Z
Y - QTY
& DIA
Y - QTY
& DIA
M
YA - BOLT
CIRCLE
TAPPED HOLE
L - DIA UNF
LA - DEPTH
N
NA
NB
G
NB
Low Speed Shaft
U‡
Key
High Speed Shaft
U†
Key
V
X
Y
YA
Z
201 5.51 3.74 11.26 0.35 0.250 0.63 0.250 0.63 2.99 2.91 1.575 1.570 1.57 0.750 .1875 x .1875 x 1.2812 0.6250 .1875 x .1875 x 1.2812 . . .
6.30 4.33
0.39
1.57
4.72 3.15
0.35
1.57
7.87 5.12
0.39
1.57
4 x 0.35
4 x 0.35
. . . 4 x 0.35
4 x 0.43
3.94
4.53
5.12
6.50
0.12
0.12
0.14
0.14
4.72
202 5.51
6.30
7.87
1.97
1.97
1.97 1.000 .2500 x .2500 x 1.5625 0.6250 .1875 x .1875 x 1.2812 . . .
1.97
4 x 0.26
4 x 0.35
. . . 4 x 0.35
4 x 0.43
3.94
4.53
5.12
6.50
0.12
0.12
0.14
0.14
203 5.51 3.74 12.48 0.39 0.250 0.71 0.250 0.63 3.58 3.54 1.969 1.570 1.97 1.000 .2500 x .2500 x 1.5625 0.6250 .1875 x .1875 x 1.2812 . . .
6.30 4.33
0.39
1.97
3.94
4.53
5.12
6.50
0.12
0.12
0.14
0.14
5.51
204 6.30
7.87
9.84
3.15
0.39
3.74
0.39
12.48
4.33
0.39 0.250 0.71 0.250 0.63 3.58 3.54 1.969 1.570
5.12
0.39
4.72 3.15
0.39
1.97
7.87 5.12
0.39
1.97
4 x 0.26
4 x 0.35
. . . 4 x 0.35
4 x 0.43
2.36
2.36
2.36 1.250 .2500 x .2500 x 2.0000 0.7500 .1875 x .1875 x 1.2812 . . .
2.36
4 x 0.35
4 x 0.35
. . . 4 x 0.43
4 x 0.53
4.53
5.12
6.50
8.46
0.12
0.14
0.14
0.16
4 x 0.35
4 x 0.35
. . . 4 x 0.43
4 x 0.53
4.53
5.12
6.50
8.46
0.12
0.14
0.14
0.16
3.74
0.43
4.33
0.43
14.53
5.12
0.43 0.375 0.86 0.250 0.63 4.53 3.66 2.362 1.570
7.09
0.43
5.51 3.74
0.43
2.76
9.84 7.09
0.43
2.76
205 6.30 4.33 14.92 0.43 0.375 0.75 0.250 0.63 4.53 3.66 2.756 1.570 2.76 1.375 .3125 x .3125 x 2.3750 0.7500 .1875 x .1875 x 1.2812 . . .
7.87 5.12
0.43
2.76
7.87 5.12
0.43
2.76
4 x 0.43 6.50 0.16
206 9.84 7.09 15.75 0.43 0.375 0.75 0.250 0.63 5.12 3.31 2.756 1.570 2.76 1.375 .3125 x .3125 x 2.3750 0.7500 .1875 x .1875 x 1.2812 0.57 1.26 4 x 0.53 8.46 0.16
11.81 9.06
0.43
2.76
4 x 0.53 10.43 0.16
7.87 5.12
0.43
3.15
4 x 0.43 6.50 0.14
11.81 9.06
0.43
3.15
4 x 0.53 10.43 0.16
207 9.84 7.09 17.32 0.43 0.625 1.25 0.313 0.63 5.51 4.33 3.150 1.970 3.15 1.625 .3750 x .3750 x 2.3750 0.8750 .1875 x .1875 x 1.2812 . . . 1.77 4 x 0.53 8.46 0.16
208 11.81 9.06 21.85 0.67 0.750 1.50 0.375 0.87 7.17 5.12 3.937 2.360 3.94 2.125 .5000 x .5000 x 2.7500 1.1250 .2500 x .2500 x 2.0000 . . .
13.78 9.84
0.67
3.94
4 x 0.53 10.43 0.16
1.97 4 x 0.69 11.81 0.20
09 17.72 13.78 25.98 0.71 0.750 1.65 0.500 1.10 9.06 5.92 4.720 3.150 5.51 2.375 .6250 x .6250 x 3.6875 1.3750 .3125 x .3125 x 2.4062 . . . 1.54 8 x 0.71 15.75 0.20
10 17.72 13.78 30.79 0.87 0.750 1.65 0.625 1.42 10.24 7.33 5.510 4.330 5.51 2.875 .7500 x .7500 x 4.6250 1.6250 .3750 x .3750 x 3.6875 . . . 2.32 8 x 0.71 15.75 0.20
++ Refer tp Page 4 for General Information and Reference Notes.
44 See Page 96 for optional flange sizes and their part numbers.
‡‡ Sizes 201 thru 206 tolerance is +.0000, –.0005; Sizes 207 thru 10 tolerance is +.0000, –.0010.
†† Sizes 201 thru 09 tolerance is +.0000, –.0005; Size 10 tolerance is +.0000, –.0010.
Standard supplied flange if not specified.
92 (281-110)
©Rexnord, 1998, 2013
Type UC Triple Reduction Gearmotor
Sizes 201-10 — Dimensions – Inches
Flange Mounted
C
SIZES 09 & 10
SIZES 201 - 208
X - CLEARANCE
HIGH SPEED
SHAFT KEY
NA
U
MA
N
UA
A BB
SIZE A  BB

C
G
4.72 3.15
0.35
7.87 5.12
0.39
L
LA
LB
LC
M
MA
V
TAPPED HOLE
LB - DIA UNF
LC - DEPTH
Z
Y - QTY
& DIA
Y - QTY
& DIA
M
YA - BOLT
CIRCLE
YA - BOLT
CIRCLE
TAPPED HOLE
L - DIA UNF
LA - DEPTH
N
NA
NB
G
NB
Low Speed Shaft
U‡
Key
High Speed Shaft
U†
Key
V
Y
YA
Z
201 5.51 3.74 11.26 0.35 0.250 0.63 0.250 0.63 2.99 2.91 1.575 1.570 1.57 0.750 .1875 x .1875 x 1.2812 0.6250 .1875 x .1875 x 1.2812 . . .
6.30 4.33
0.39
1.57
1.57
4 x 0.35
4 x 0.35
. . . 4 x 0.35
4 x 0.43
3.94
4.53
5.12
6.50
0.12
0.12
0.14
0.14
4.72
202 5.51
6.30
7.87
1.97
1.97
1.97 1.000 .2500 x .2500 x 1.5625 0.6250 .1875 x .1875 x 1.2812 . . .
1.97
4 x 0.26
4 x 0.35
. . . 4 x 0.35
4 x 0.43
3.94
4.53
5.12
6.50
0.12
0.12
0.14
0.14
203 5.51 3.74 12.48 0.39 0.250 0.71 0.250 0.63 3.58 3.54 1.969 1.570 1.97 1.000 .2500 x .2500 x 1.5625 0.6250 .1875 x .1875 x 1.2812 . . .
6.30 4.33
0.39
1.97
1.97
1.97
4 x 0.26
4 x 0.35
. . . 4 x 0.35
4 x 0.43
3.94
4.53
5.12
6.50
0.12
0.12
0.14
0.14
5.51
204 6.30
7.87
9.84
2.36
2.36
2.36 1.250 .2500 x .2500 x 2.0000 0.7500 .1875 x .1875 x 1.2812 . . .
2.36
4 x 0.35
4 x 0.35
. . . 4 x 0.43
4 x 0.53
4.53
5.12
6.50
8.46
0.12
0.14
0.14
0.16
4 x 0.35
4 x 0.35
. . . 4 x 0.43
4 x 0.53
4.53
5.12
6.50
8.46
0.12
0.14
0.14
0.16
3.15
0.39
3.74
0.39
12.48
4.33
0.39 0.250 0.71 0.250 0.63 3.58 3.54 1.969 1.570
5.12
0.39
4.72 3.15
0.39
7.87 5.12
0.39
3.74
0.43
4.33
0.43
14.53
5.12
0.43 0.375 0.86 0.250 0.63 4.53 3.66 2.362 1.570
7.09
0.43
1.57
X
5.51 3.74
0.43
2.76
9.84 7.09
0.43
2.76
205 6.30 4.33 14.92 0.43 0.375 0.75 0.250 0.63 4.53 3.66 2.756 1.570 2.76 1.375 .3125 x .3125 x 2.3750 0.7500 .1875 x .1875 x 1.2812 . . .
7.87 5.12
0.43
2.76
7.87 5.12
0.43
2.76
4 x 0.43 6.50 0.16
206 9.84 7.09 15.75 0.43 0.375 0.75 0.250 0.63 5.12 3.31 2.756 1.570 2.76 1.375 .3125 x .3125 x 2.3750 0.7500 .1875 x .1875 x 1.2812 0.57 1.26 4 x 0.53 8.46 0.16
11.81 9.06
0.43
2.76
4 x 0.53 10.43 0.16
7.87 5.12
0.43
3.15
11.81 9.06
0.43
3.15
4 x 0.43 6.50 0.14
207 9.84 7.09 17.32 0.43 0.625 1.25 0.313 0.63 5.51 4.33 3.150 1.970 3.15 1.625 .3750 x .3750 x 2.3750 0.8750 .1875 x .1875 x 1.2812 . . . 1.77 4 x 0.53 8.46 0.16
208 11.81 9.06 21.85 0.67 0.750 1.50 0.375 0.87 7.17 5.12 3.937 2.360 3.94 2.125 .5000 x .5000 x 2.7500 1.1250 .2500 x .2500 x 2.0000 . . .
13.78 9.84
0.67
3.94
4 x 0.53 10.43 0.16
4 x 0.53 10.43 0.16
1.97 4 x 0.69 11.81 0.20
09 17.72 13.78 25.98 0.71 0.750 1.65 0.500 1.10 9.06 5.92 4.720 3.150 5.51 2.375 .6250 x .6250 x 3.6875 1.3750 .3125 x .3125 x 2.4062 . . . 1.54 8 x 0.71 15.75 0.20
10 17.72 13.78 30.79 0.87 0.750 1.65 0.625 1.42 10.24 7.33 5.510 4.330 5.51 2.875 .7500 x .7500 x 4.6250 1.6250 .3750 x .3750 x 3.6875 . . . 2.32 8 x 0.71 15.75 0.20
++ Refer tp Page 4 for General Information and Reference Notes.
44 See Page 96 for optional flange sizes and their part numbers.
‡‡ Sizes 201 thru 206 tolerance is +.0000, –.0005; Sizes 207 thru 10 tolerance is +.0000, –.0010.
†† Sizes 201 thru 09 tolerance is +.0000, –.0005; Size 10 tolerance is +.0000, –.0010.
Standard supplied flange if not specified.
©Rexnord, 1998, 2013
(281-110) 93
Type UC Quadruple Reduction Gearmotor
Sizes 203-10 — Dimensions – Inches
Flange Mounted
C
SIZES 09 & 10
SIZES 203 - 208
X - CLEARANCE
HIGH SPEED
SHAFT KEY
NA
U
MA
N
UA
A BB
SIZE A  BB

C
G
4.72 3.15
0.39
7.87 5.12
0.39
L
LA
LB
LC
M
TAPPED HOLE
LB - DIA UNF
LC - DEPTH
Z
Y - QTY
& DIA
Y - QTY
& DIA
V
M
YA - BOLT
CIRCLE
YA - BOLT
CIRCLE
TAPPED HOLE
L - DIA UNF
LA - DEPTH
MA
N
NA
NB
G
NB
Low Speed Shaft
U‡
Key
High Speed Shaft
U†
Key
V
Y
YA
Z
203 5.51 3.74 19.80 0.39 0.250 0.71 0.250 0.63 3.58 3.54 1.969 1.570 1.97 1.000 .2500 x .2500 x 1.5625 0.6250 .1875 x .1875 x 1.2812 . . .
6.30 4.33
0.39
1.97
1.97
4 x 0.26
4 x 0.35
. . . 4 x 0.35
4 x 0.43
3.94
4.53
5.12
6.50
0.12
0.12
0.14
0.14
5.51
204 6.30
7.87
9.84
2.36
2.36
2.36 1.250 .2500 x .2500 x 2.0000 0.6250 .1875 x .1875 x 1.2812 . . .
2.36
4 x 0.35
4 x 0.35
. . . 4 x 0.43
4 x 0.53
4.53
5.12
6.50
8.46
0.12
0.14
0.14
0.16
4 x 0.35
4 x 0.35
. . . 4 x 0.43
4 x 0.53
4.53
5.12
6.50
8.46
0.12
0.14
0.14
0.16
3.74
0.43
4.33
0.43
22.48
5.12
0.43 0.375 0.86 0.250 0.63 4.53 3.66 2.362 1.570
7.09
0.43
1.97
X
5.51 3.74
0.43
2.76
9.84 7.09
0.43
2.76
205 6.30 4.33 22.87 0.43 0.375 0.75 0.250 0.63 4.53 3.66 2.756 1.570 2.76 1.375 .3125 x .3125 x 2.3750 0.6250 .1875 x .1875 x 1.2812 . . .
7.87 5.12
0.43
2.76
7.87 5.12
0.43
2.76
4 x 0.43 6.50 0.16
206 9.84 7.09 23.70 0.43 0.375 0.75 0.250 0.63 5.12 3.31 2.756 1.570 2.76 1.375 .3125 x .3125 x 2.3750 0.6250 .1875 x .1875 x 1.2812 0.57 1.26 4 x 0.53 8.46 0.16
11.81 9.06
0.43
2.76
4 x 0.53 10.43 0.16
7.87 5.12
0.43
3.15
11.81 9.06
0.43
3.15
4 x 0.43 6.50 0.14
207 9.84 7.09 25.16 0.43 0.625 1.25 0.250 0.63 5.51 4.33 3.150 1.570 3.15 1.625 .3750 x .3750 x 2.3750 0.6250 .1875 x .1875 x 1.2812 . . . 1.77 4 x 0.53 8.46 0.16
208 11.81 9.06 29.57 0.67 0.750 1.50 0.250 0.63 7.17 5.12 3.937 1.570 3.94 2.125 .5000 x .5000 x 2.7500 0.7500 .1875 x .1875 x 1.2812 . . .
13.78 9.84
0.67
3.94
4 x 0.53 10.43 0.16
4 x 0.53 10.43 0.16
1.97 4 x 0.69 11.81 0.20
09 17.72 13.78 32.76 0.71 0.750 1.65 0.250 0.63 9.06 5.92 4.720 1.570 5.51 2.375 .6250 x .6250 x 3.6875 0.7500 .1875 x .1875 x 1.2812 . . . 1.54 8 x 0.71 15.75 0.20
10 17.72 13.78 37.64 0.87 0.750 1.65 0.313 0.63 10.24 7.33 5.510 1.970 5.51 2.875 .7500 x .7500 x 4.6250 0.8750 .1875 x .1875 x 1.2812 . . . 2.32 8 x 0.71 15.75 0.20
++ Refer tp Page 4 for General Information and Reference Notes.
44 See Page 96 for optional flange sizes and their part numbers.
‡‡ Sizes 203 thru 206 tolerance is +.0000, –.0005; Sizes 207 thru 10 tolerance is +.0000, –.0010.
†† Sizes 203 thru 10 tolerance is +.0000, –.0005
Standard supplied flange if not specified.
94 (281-110)
©Rexnord, 1998, 2013
Type UC Quintuple Reduction Gearmotor
Sizes 203-10 — Dimensions – Inches
Flange Mounted
C
SIZES 09 & 10
SIZES 203 - 208
X - CLEARANCE
HIGH SPEED
SHAFT KEY
NA
U
MA
N
UA
A BB
SIZE A  BB

C
G
4.72 3.15
0.39
7.87 5.12
0.39
L
LA
LB
LC
M
V
TAPPED HOLE
LB - DIA UNF
LC - DEPTH
Z
Y - QTY
& DIA
Y - QTY
& DIA
M
YA - BOLT
CIRCLE
YA - BOLT
CIRCLE
TAPPED HOLE
L - DIA UNF
LA - DEPTH
MA
N
NA
NB
G
NB
Low Speed Shaft
U‡
Key
High Speed Shaft
U†
Key
V
Y
YA
Z
203 5.51 3.74 19.80 0.39 0.250 0.71 0.250 0.63 3.58 3.54 1.969 1.570 1.97 1.000 .2500 x .2500 x 1.5625 0.6250 .1875 x .1875 x 1.2812 . . .
6.30 4.33
0.39
1.97
1.97
4 x 0.26
4 x 0.35
. . . 4 x 0.35
4 x 0.43
3.94
4.53
5.12
6.50
0.12
0.12
0.14
0.14
5.51
204 6.30
7.87
9.84
2.36
2.36
2.36 1.250 .2500 x .2500 x 2.0000 0.6250 .1875 x .1875 x 1.2812 . . .
2.36
4 x 0.35
4 x 0.35
. . . 4 x 0.43
4 x 0.53
4.53
5.12
6.50
8.46
0.12
0.14
0.14
0.16
4 x 0.35
4 x 0.35
. . . 4 x 0.43
4 x 0.53
4.53
5.12
6.50
8.46
0.12
0.14
0.14
0.16
3.74
0.43
4.33
0.43
22.48
5.12
0.43 0.375 0.86 0.250 0.63 4.53 3.66 2.362 1.570
7.09
0.43
1.97
X
5.51 3.74
0.43
2.76
9.84 7.09
0.43
2.76
205 6.30 4.33 22.87 0.43 0.375 0.75 0.250 0.63 4.53 3.66 2.756 1.570 2.76 1.375 .3125 x .3125 x 2.3750 0.6250 .1875 x .1875 x 1.2812 . . .
7.87 5.12
0.43
2.76
7.87 5.12
0.43
2.76
4 x 0.43
206 9.84 7.09 23.70 0.43 0.375 0.75 0.250 0.63 5.12 3.31 2.756 1.570 2.76 1.375 .3125 x .3125 x 2.3750 0.6250 .1875 x .1875 x 1.2812 0.57 1.26 4 x 0.53
11.81 9.06
0.43
2.76
4 x 0.53
3.15
7.87 5.12
0.43
4 x 0.43
207 9.84 7.09 25.16 0.43 0.625 1.25 0.250 0.63 5.51 4.33 3.150 1.570 3.15 1.625 .3750 x .3750 x 2.3750 0.6250 .1875 x .1875 x 1.2812 . . . 1.77 4 x 0.53
11.81 9.06
0.43
3.15
4 x 0.53
6.50 0.16
8.46 0.16
10.43 0.16
208 11.81 9.06 29.57 0.67 0.750 1.50 0.250 0.63 7.17 5.12 3.937 1.570 3.94 2.125 .5000 x .5000 x 2.7500 0.7500 .1875 x .1875 x 1.2812 . . . 1.97 4 x 0.53
13.78 9.84
0.67
3.94
4 x 0.69
09 17.72 13.78 32.76 0.71 0.750 1.65 0.250 0.63 9.06 5.92 4.720 1.570 5.51 2.375 .6250 x .6250 x 3.6875 0.7500 .1875 x .1875 x 1.2812 . . . 1.54 8 x 0.71
10 17.72 13.78 37.64 0.87 0.750 1.65 0.313 0.63 10.24 7.33 5.510 1.970 5.51 2.875 .7500 x .7500 x 4.6250 0.8750 .1875 x .1875 x 1.2812 . . . 2.32 8 x 0.71
10.43 0.16
11.81 0.20
6.50 0.14
8.46 0.16
10.43 0.16
15.75 0.20
15.75 0.20
++ Refer tp Page 4 for General Information and Reference Notes.
44 See Page 96 for optional flange sizes and their part numbers.
‡‡ Sizes 203 thru 206 tolerance is +.0000, –.0005; Sizes 207 thru 10 tolerance is +.0000, –.0010.
†† Sizes 203 thru 10 tolerance is +.0000, –.0005
Standard supplied flange if not specified.
©Rexnord, 1998, 2013
(281-110) 95
Type UC – Accessories
Type UCF Optional Flanges Sizes 201 – 10 Flange Dimension – Inches
SIZES 09 & 10
SIZES 201 - 208
U
N
A BB
YA - BOLT
CIRCLE
YA - BOLT
CIRCLE
Part
Number
A
BB
G
201
1941123
1941200
1941201
1941202
4.72
5.51
6.30
7.87
3.15
3.74
4.33
5.12
0.35
0.35
0.39
0.39
202
1941203
1941121
1941204
1941205
4.72
5.51
6.30
7.87
3.15
3.74
4.33
5.12
0.39
0.39
0.39
0.39
203
1941203
1941121
1941204
1941205
4.72
5.51
6.30
7.87
3.15
3.74
4.33
5.12
0.39
0.39
0.39
0.39
204
1941206
1941207
1941143
1941141
5.51
6.30
7.87
9.84
3.74
4.33
5.12
7.09
0.43
0.43
0.43
0.43
205
1941206
1941207
1941143
1941141
5.51
6.30
7.87
9.84
3.74
4.33
5.12
7.09
0.43
0.43
0.43
0.43
0.375
206
1941208
1941136
1941139
7.87
9.84
11.81
5.12
7.09
9.06
0.43
0.43
0.43
207
1941208
1941136
1941139
7.87
9.84
11.81
5.12
7.09
9.06
208
1941172
1941179
11.81
13.78
09
10
Integral with Hsg
Integral with Hsg
Size

Z
Y - QTY
& DIA
Y - QTY
& DIA
L
LA
TAPPED HOLE
L - DIA UNF
LA - DEPTH
N
NB
1.575
1.57
1.57
1.57
1.57
1.969
1.97
1.97
1.97
1.97
1.969
1.97
1.97
1.97
1.97
2.362
2.36
2.36
2.36
2.36
0.75
2.756
2.76
2.76
2.76
2.76
0.375
0.75
2.756
0.43
0.43
0.43
0.625
1.25
9.06
9.84
0.67
0.67
0.750
17.72
13.78
0.71
17.72
13.78
0.87
G
NB
Low Speed Shaft
Y
YA
Z
.1875 x .1875 x 1.2812
4 x 0.35
4 x 0.35
4 x 0.35
4 x 0.43
3.94
4.53
5.12
6.50
0.12
0.12
0.14
0.14
.2500 x .2500 x 1.5625
4 x 0.26
4 x 0.35
4 x 0.35
4 x 0.43
3.94
4.53
5.12
6.50
0.12
0.12
0.14
0.14
.2500 x .2500 x 1.5625
4 x 0.26
4 x 0.35
4 x 0.35
4 x 0.43
3.94
4.53
5.12
6.50
0.12
0.12
0.14
0.14
.2500 x .2500 x 2.0000
4 x 0.35
4 x 0.35
4 x 0.43
4 x 0.53
4.53
5.12
6.50
8.46
0.12
0.14
0.14
0.16
1.375
.3125 x .3125 x 2.3750
4 x 0.35
4 x 0.35
4 x 0.43
4 x 0.53
4.53
5.12
6.50
8.46
0.12
0.14
0.14
0.16
2.76
2.76
2.76
1.375
.3125 x .3125 x 2.3750
4 x 0.43
4 x 0.53
4 x 0.53
6.50
8.46
10.43
0.16
0.16
0.16
3.150
3.15
3.15
3.15
1.625
.3750 x .3750 x 2.3750
4 x 0.43
4 x 0.53
4 x 0.53
6.50
8.46
10.43
0.14
0.16
0.16
1.50
3.937
3.94
3.94
2.125
.5000 x .5000 x 2.7500
4 x 0.53
4 x 0.69
10.43
11.81
0.16
0.20
0.750
1.65
4.720
5.51
2.375
.6250 x .6250 x 3.6875
8 x 0.71
15.75
0.20
0.750
1.65
5.510
5.51
2.875
.7500 x .7500 x 4.6250
8 x 0.71
15.75
0.20
0.250
0.63
0.250
0.71
0.250
0.71
0.375
0.86
U‡
0.750
1.000
1.000
1.250
Key
++ Refer tp Page 4 for General Information and Reference Notes.
‡‡ Sizes 201 thru 206 tolerance is +.0000, –.0005; Sizes 207 thru 10 tolerance is +.0000, –.0010.Standard supplied flange part number unless otherwise specified.
Standard supplied flange part number unless otherwise specified.
Type UC Fan Cooled Drives
Y
NA
MA
NB
DRIVE
SIZE
207
208
09
10
96 (281-110)
MA
NA
NB
Y
Kit
Part Number
8.86
10.43
12.60
14.96
1.38
1.77
2.56
3.74
1.28
2.00
2.40
3.69
17.32
21.85
25.98
30.79
1940894
1940895
1940896
1940897
©Rexnord, 1998, 2013
Type UC – Accessories
Gearmotor Backstop Module
Gearmotor backstop modules can be fitted between the gear drive and motor. The backstop device incorporates high quality centrifugal lift off sprags which are
wear free above the lift off speed (rpm). To ensure correct operation motor speed must exceed lift off speed. Suitable for ambient temperatures of -40°F to 122°F
(-40°C to 50°C). When a backstop module is furnished, dimension K should be added to the overall length of the gearmotor assembly.
Low speed shaft rotation must be specified when ordering as viewed from the low speed shaft end.
KA
BD
DIMENSIONS — INCHES (NEMA C Flange)
Motor Frame
Size
Lift Off
Speed
(rpm)
Rated Locking
Torque Max at
Motor
(lb-in)
BD
KA
182TC / 184TC
213TC / 215TC
254TC / 256TC
284TC / 286TC
324TC / 326TC
670
670
620
620
550
2655
2655
8320
8320
11150
9.00
9.00
9.00
11.00
13.00
3.75
3.75
4.75
5.38
6.00
Kit
Part
Number
1940888
1940889
1940890
1940891
1940892
Gear Drive Backstop Module
The gear drives listed below can be fitted with an internal backstop, this has no effect of the external drive size. The backstop device incorporates high quality
centrifugal lift off sprags which are wear free above the lift off speed (rpm). Suitable for ambient temperatures of -40°F to 122°F (-40°C to 50°C).
Low speed shaft rotation must be specified when ordering as viewed from the low speed shaft end.
DIMENSIONS — INCHES
Rating Locking
Kit
DRIVE Lift Off
Speed Torque Max at HSS
Part
SIZE
(rpm)
(lb-in)
Number
204
205
206
207
208
09
10
©Rexnord, 1998, 2013
800
800
800
670
670
670
670
885
885
885
1504
1504
2655
2655
Consult
Factory
(281-110) 97
Type UC – Approximate Shipping Weights – lb «
56C
DRIVE
SIZE
143TC
145TC
182TC
184TC
Motor Frame Size
213TC
215TC
254TC
256TC
284TC
286TC
324TC
326TC
C-Face Drive With Mounted Motor
Base Flange Base Flange Base Flange Base Flange Base Flange Base Flange Base Flange Base Flange Base Flange Base Flange Base Flange Base Flange Base Flange
201UC2
201UC3
202UC2
202UC3
203UC2
203UC3
203UC4
203UC5
204UC2
204UC3
204UC4
204UC5
205UC2
205UC3
205UC4
205UC5
206UC2
206UC3
206UC4
206UC5
207UC2
207UC3
207UC4
207UC5
208UC2
208UC3
208UC4
208UC5
09UC2
09UC3
09UC4
09UC5
10UC2
10UC3
10UC4
10UC5
20
24
27
31
27
31
48
51
47
52
79
82
48
52
79
82
59
64
89
94
75
86
106
114
160
157
211
218
...
280
308
330
...
...
448
492
21
23
30
34
30
34
51
54
52
56
83
87
53
56
83
87
64
68
93
98
71
82
101
109
153
154
204
210
...
286
314
336
...
...
439
483
20
24
27
31
27
31
48
...
47
52
79
...
48
52
79
...
59
64
89
...
75
86
106
114
160
157
211
218
...
280
308
330
...
...
448
492
21
23
30
34
30
34
51
...
52
56
83
...
53
56
83
...
64
68
93
...
71
82
101
109
153
154
204
210
...
286
314
336
...
...
439
483
20
24
27
31
27
31
48
...
47
52
79
...
48
52
79
...
59
64
89
...
75
86
106
114
160
157
211
218
...
280
308
330
...
...
448
492
21
23
30
34
30
34
51
...
52
56
83
...
53
56
83
...
64
68
93
...
71
82
101
109
153
154
204
210
...
286
314
336
...
...
439
483
23
27
30
34
30
34
...
...
62
67
...
...
63
67
...
...
74
79
...
...
86
97
...
...
160
164
...
...
248
280
324
...
352
394
461
...
24
26
33
37
33
37
...
...
67
71
...
...
68
71
...
...
79
83
...
...
84
95
...
...
157
161
...
...
254
286
330
...
343
385
452
...
26
30
33
37
33
37
...
...
77
82
...
...
78
82
...
...
89
94
...
...
86
97
...
...
160
164
...
...
248
280
324
...
352
394
461
...
27
29
36
40
36
40
...
...
82
86
...
...
83
86
...
...
94
98
...
...
84
95
...
...
157
161
...
...
254
286
330
...
343
385
452
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
86
...
...
...
160
164
...
...
248
...
...
...
352
394
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
84
...
...
...
157
161
...
...
254
...
...
...
343
385
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
86
...
...
...
160
164
...
...
248
...
...
...
352
394
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
84
...
...
...
157
161
...
...
254
...
...
...
343
385
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
94
...
...
...
160
...
...
...
264
...
...
...
371
410
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
88
...
...
...
157
...
...
...
270
...
...
...
362
401
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
94
...
...
...
160
...
...
...
264
...
...
...
371
410
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
88
...
...
...
157
...
...
...
270
...
...
...
362
401
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
269
...
...
...
376
415
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
275
...
...
...
367
406
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
269
...
...
...
376
415
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
275
...
...
...
367
406
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
273
...
...
...
380
419
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
279
...
...
...
371
410
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
273
...
...
...
380
419
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
279
...
...
...
371
410
...
...
Continued on next page
DRIVE
SIZE
201UC2
201UC3
202UC2
202UC3
203UC2
203UC3
203UC4
203UC5
204UC2
204UC3
204UC4
204UC5
205UC2
205UC3
205UC4
205UC5
206UC2
206UC3
206UC4
206UC5
98 (281-110)
Solid Input Shaft Gear Drive
Base
Flange
18
19
26
29
26
29
47
48
49
49
73
75
49
49
77
79
60
60
88
90
19
20
29
31
29
31
49
50
51
51
77
79
53
51
82
84
64
64
93
95
DRIVE
SIZE
207UC2
207UC3
207UC4
207UC5
208UC2
208UC3
208UC4
208UC5
09UC2
09UC3
09UC4
09UC5
10UC2
10UC3
10UC4
10UC5
Solid Input Shaft Gear Drive
Base
Flange
84
86
106
108
148
163
212
212
252
272
309
377
375
395
457
499
88
90
110
112
157
172
223
220
258
278
316
284
366
286
448
490
©Rexnord, 1998, 2013
Type UC – Approximate Shipping Weights – lb «
Motor Frame Size
DRIVE
SIZE
56C
143TC
145TC
182TC
184TC
213TC
215TC
254TC
256TC
284TC
286TC
324TC
326TC
C-Face Drive With Mounted Motor
Base Flange Base Flange Base Flange Base Flange Base Flange Base Flange Base Flange Base Flange Base Flange Base Flange Base Flange Base Flange Base Flange
201UC2
201UC3
202UC2
202UC3
203UC2
203UC3
203UC4
203UC5
204UC2
204UC3
204UC4
204UC5
205UC2
205UC3
205UC4
205UC5
206UC2
206UC3
206UC4
206UC5
207UC2
207UC3
207UC4
207UC5
208UC2
208UC3
208UC4
208UC5
09UC2
09UC3
09UC4
09UC5
10UC2
10UC3
10UC4
10UC5
45
49
52
56
52
56
73
76
72
77
104
107
73
77
104
107
84
89
114
119
100
111
131
139
185
182
236
243
...
305
333
355
...
...
473
517
46
48
55
59
55
59
76
79
77
81
108
112
78
81
108
112
89
93
118
123
96
107
126
134
178
179
229
235
...
311
339
361
...
...
464
508
50
54
57
61
57
61
78
...
77
82
109
...
78
82
109
...
89
94
119
...
105
116
136
144
190
187
241
248
...
310
338
360
...
...
478
522
51
53
60
64
60
64
81
...
82
86
113
...
83
86
113
...
94
98
123
...
101
112
131
139
183
184
234
240
...
316
344
366
...
...
469
513
60
64
67
71
67
71
88
...
87
92
119
...
88
92
119
...
99
104
129
...
115
126
146
154
200
197
251
258
...
320
348
370
...
...
488
532
61
63
70
74
70
74
91
...
92
96
123
...
93
96
123
...
104
108
133
...
111
122
141
149
193
194
244
250
...
326
354
376
...
...
479
523
78
82
85
89
85
89
...
...
117
122
...
...
118
122
...
...
129
134
...
...
141
152
...
...
215
219
...
...
303
335
379
...
407
449
516
...
79
81
88
92
88
92
...
...
122
126
...
...
123
126
...
...
134
138
...
...
139
150
...
...
212
216
...
...
309
341
385
...
398
440
507
...
103
107
110
114
110
114
...
...
154
159
...
...
155
159
...
...
166
171
...
...
163
174
...
...
237
241
...
...
325
357
401
...
429
471
538
...
104
106
113
117
113
117
...
...
159
163
...
...
160
163
...
...
171
175
...
...
161
172
...
...
234
238
...
...
331
363
407
...
420
462
529
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
203
...
...
...
277
281
...
...
365
...
...
...
469
511
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
201
...
...
...
274
278
...
...
371
...
...
...
460
502
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
215
...
...
...
289
293
...
...
377
...
...
...
481
523
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
213
...
...
...
286
290
...
...
383
...
...
...
472
514
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
293
...
...
...
359
...
...
...
463
...
...
...
570
609
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
287
...
...
...
356
...
...
...
469
...
...
...
561
600
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
367
...
...
...
433
...
...
...
537
...
...
...
644
683
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
361
...
...
...
430
...
...
...
543
...
...
...
635
674
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
646
...
...
...
753
792
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
652
...
...
...
744
783
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
668
...
...
...
775
814
...
...
... ... ... ...
... ... ... ...
... ... ... ...
... ... ... ...
... ... ... ...
... ... ... ...
... ... ... ...
... ... ... ...
... ... ... ...
... ... ... ...
... ... ... ...
... ... ... ...
... ... ... ...
... ... ... ...
... ... ... ...
... ... ... ...
... ... ... ...
... ... ... ...
... ... ... ...
... ... ... ...
... ... ... ...
... ... ... ...
... ... ... ...
... ... ... ...
... ... ... ...
... ... ... ...
... ... ... ...
... ... ... ...
674 867 873 852
... ... ... ...
... ... ... ...
... ... ... ...
766 974 965 959
805 1013 1004 998
... ... ... ...
... ... ... ...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
858
...
...
...
950
989
...
...
++ All weights exclude lubricant.
©Rexnord, 1998, 2013
(281-110) 99
866-REXNORD/866-739-6673 (Within the US)
414-643-2366 (Outside the US)
www.rexnord.com
Why Choose Rexnord?
When it comes to providing highly engineered products that
improve productivity and efficiency for industrial applications
worldwide, Rexnord is the most reliable in the industry.
Commitment to customer satisfaction and superior value
extend across every business function.
Delivering Lowest Total Cost of Ownership
The highest quality products are designed to help
prevent equipment downtime and increase productivity
and dependable operation.
Valuable Expertise
An extensive product offering is accompanied by global sales
specialists, customer service and maintenance support teams,
available anytime.
Solutions to Enhance Ease of Doing Business
Commitment to operational excellence ensures the right
products at the right place at the right time.
Rexnord Corporation
Rexnord is a growth-oriented, multi-platform industrial company with leading market
shares and highly trusted brands that serve a diverse array of global end markets.
Process and Motion Control
The Rexnord Process and Motion Control platform designs, manufactures, markets
and services specified, highly engineered mechanical components used within complex
systems where our customers’ reliability requirements and the cost of failure or
downtime are extremely high.
Water Management
The Rexnord Water Management platform designs, procures, manufactures
and markets products that provide and enhance water quality, safety, flow
control and conservation.
©2013 Rexnord 281-110 Printed in USA 05/13