Model PLVX AC-AC
Enhanced Precision Displacement Transducer
DESCRIPTION
Model PLVX displacement transducer is designed for single and
steel constructed and windings are magnetically shielded. Ultra
multi-point industrial gaging applications and micro-displace-
Precision LVDTs utilize spring loaded captive guided armatures
ment measurements in research and scientific studies. It incor-
and low friction, non-rotating probes. Non-linearity is 0.25 % full
porates non-rotating armatures to increase resistance to side
scale. The Model PLVX with a 0.02 in stroke range has a me-
loads and improve repeatability. Bodies and probes are stainless
chanical zero adjustment to correct pre- and over-travel.
FEATURES
• Miniature design
•
0.25 % non-linearity
• Rugged, enhanced accuracy
•
Enhanced immunity to electrical noise
•
±0.02 in to ±0.2 in range
•
-58 °F to 257 °F operating range (standard)
• Non-rotating probe
• Stainless steel construction
•
Extended life cycle
•
Infinite resolution
• Captive guided spring return armature
•
Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model PLVX AC-AC
PERFORMANCE SPECIFICATIONS
RANGE CODES
Characteristic
Measure
Range Code
Available ranges
Stroke range
±0,51 mm to 5,08 mm [±0.02 in to 0.20
in]
HI
±0,51 mm [±0.02 in]
Non-linearity (max.)
±0.25 % full scale
HK
±1,02 mm [±0.04 in]
Non-repeatability (max.)
6 microinches
HM
±2,54 mm [±0.10 in]
Output sensitivity
See table
HN
±5,08 mm [±0.20 in]
Output load (min.)
100000 ohm
Resolution
Infinite
Phase shift
<10° @ 5 kHz
OPTION CODES
Range Code
Many range/option combinations are available in
our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/
TMsensor-ship for updated listings.
Stroke ranges
±2,54 mm [±0.1 in]; ±0,51 mm [±0.02 in];
±1,02 mm [±0.04 in]; ±0,25 mm [±0.01 in]
Electrical
termination
Multiconductor shielded cable (1,83 m [6 ft])
Electrical cable
orientation
Ra. Right angle cable exit
Mounting
threads
TM392. 3/8-32 UNF threaded sleeve
Improved
linearity
L10. ±0.1 % linearity* (only for ±1,02 mm
[±0.04]; ±2,54 mm [±0.1]; ±5,08 mm [±0.2 in])
ENVIRONMENTAL SPECIFICATIONS
Characteristic
Measure
Temperature, operating
-40 °C to 100 °C [-40 °F to 212 °F]
Temperature effect, zero
(max.)
0.005 % full scale/°F
Temperature effect, span
(max.)
0.005 % full scale/°F
ELECTRICAL SPECIFICATIONS
Characteristic
Measure
Element type
ac-ac displacement transducer
Input supply (calibrated)
5 V RMS @ 5 kHz
Input supply (acceptable)
1 V to 7 V RMS @ 2 kHz to 10 kHz
Electrical termination
Multiconductor shielded cable
* Air activated model available. Consult factory for details
MECHANICAL SPECIFICATIONS
Characteristic
Measure
Case material
Stainless steel
Probe material
Stainless steel
Armature type
Captive guided spring return
Weight
See table
Spring force (max.)
See table
2 Honeywell • Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Enhanced Precision Displacement Transducer
MOUNTING DIMENSIONS
Range
code
Available
stroke range
L
mm [in]
N
mm [in]
D
mm [in]
X
mm [in]
Approx. unit
weight
Max. spring
force
g [oz]
Output
sensitivity
mV/V/ 0.001 in
HI
±0,51[±0.02]
25,9 [1.02]
5,59 [0.22]
8,00 [0.315]
7,62 [0.30]
12,76 [0.45]
99,23 [3.5]
6
HK
±1,02 [±0.04]
53,1 [2.09]
13,97 [0.55]
8,00 [0.315]
13,97 [0.55]
15,88 [0.56]
100,92 [3.56]
4
HM
±2,54 [±0.1]
56,9 [2.24]
18,03 [0.71]
8,00 [0.315]
20,1 [0.79]
17,86 [0.63]
117,93 [4.16]
4
HN
±5,08 [±0.2]
86,6 [3.41]*
29,97 [1.18]
8,00 [0.315]
22,1 [0.87]
22,11 [0.78]
149,97 [5.29]
4*
* New L dimension and output sensitivity for 5,08 mm [±0.2 in] range. For old L dimension and output sensitivity, consult factory.
WIRING CODES
For reference only
TYPICAL SYSTEM DIAGRAM
Wire color
Supply
Red
(+) supply (calibrated @ 5 V RMS, 5 kHz)
Yellow
Supply return
Blue
Output
Green
Output return
Black
Secondary center tap (normally not connected)
5
Nominal
electric
zero
point
Honeywell • Sensing and Control
3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model PLVX AC-AC
Enhanced Precision Displacement Transducer
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit
www.honeywell.com/sensing or call +1-815-235-6847
Email inquiries to info.sc@honeywell.com
WARNING
PERSONAL INJURY
•DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
•The information presented in this catalogue is for
reference only. DO NOT USE this document as product
installation information.
•Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008749-1-EN IL50 GLO May 2008
Copyright © 2008 Honeywell International Inc. All rights reserved.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2,54 mm to 12,7 mm
[0.10 in to 0.50 in]
Model S5 AC-AC
0,25 mm to 1,02 mm
[0.01 in to 0.04 in]
Enhanced Precision Displacement Transducer
DESCRIPTION
Model S5 Ultra Precision displacement transducer is designed
probes are stainless steel constructed and windings
for single and multi-point industrial gaging applications and
are magnetically shielded. Ultra Precision displacement trans-
micro-displacement measurements in research and scientific
ducers utilize spring loaded captive guided armatures and low
studies. It incorporates non-rotating armatures to increase
friction, non-rotating probes. Non-linearity is 0.25% full scale.
resistance to side loads and improve repeatability. Bodies and
FEATURES
• Miniature design
•
0.25 % non-linearity
• Rugged, enhanced accuracy
•
Enhanced immunity to electrical noise
•
±0.01 in to ±0.5 in range
•
-58 °F to 257 °F operating range (standard)
• Non-rotating probe
• Stainless steel construction
•
Extended life cycle
•
Infinite resolution
• Captive guided spring return armature
•
Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model S5 AC-AC
PERFORMANCE SPECIFICATIONS
RANGE CODES
Characteristic
Measure
Range Code
Available ranges
Stroke range
±0,25 mm to 12,7 mm [±0.10 in to 0.50
in]
HH
±0,25 mm [±0.01 in]
Non-linearity (max.)
±0.25 % full scale
HI
±0,51 mm [±0.02 in]
Non-repeatability
<20 microinches
HK
±1,02 mm [±0.04 in]
Output sensitivity
See table
HM
±2,54 mm [±0.10 in]
Output load (min.)
100000 ohm
HN
±5,08 mm [±0.20 in]
Resolution
Infinite
HF
±7,62 mm [±0.30 in]
Phase shift
<10° @ 5 kHz
HG
±10,16 mm [±0.40 in]
HP
±12,7 mm [±0.50 in]
ENVIRONMENTAL SPECIFICATIONS
Characteristic
Measure
Temperature, operating
-20 °C to 125 °C [-4 °F to 257 °F]
Temperature effect, zero
(max.)
0.006 % full scale/°F
Temperature effect, span
(max.)
0.006 % full scale/°F
ELECTRICAL SPECIFICATIONS
Characteristic
Measure
Element type
ac-ac displacement transducer
Input supply (calibrated)
5 V RMS @ 5 kHz
Input supply (acceptable)
1 V to 7 V RMS @ 2 kHz to 10 kHz
Electrical termination
Multiconductor shielded cable
MECHANICAL SPECIFICATIONS
Characteristic
Measure
Case material
Stainless steel
Probe material
Stainless steel
Armature type
Captive guided spring return
Weight
See table
Spring force (max.)
See table
OPTION CODES
Range Code
Many range/option combinations are available in
our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/
TMsensor-ship for updated listings.
Stroke ranges
±0,25 mm to 12,7 mm [±0.01 in to ±0.5 in]
Electrical
termination
Multiconductor shielded cable (1,83 m [6 ft])
Electrical cable
orientation
Ra. Right angle cable exit
Mounting
threads
TM392. 3/8-32 UNF threaded sleeve
Improved
linearity
L10. 0.1 % max. linearity (only for ±0,01 mm to
0,51 mm [±0.040 in to ±0.02 in])
Higher
temperature
TM315. 204 °C [400 °F] up to 101,6 mm [±4.0
in]
2 Honeywell • Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Enhanced Precision Displacement Transducer
MOUNTING DIMENSIONS
Range
code
Available
stroke range
mm [in]
L
mm [in]
D
mm [in]
X
mm [in]
Approx. unit
weight
g [oz]
Max. spring
force
g [oz]
Output
sensitivity
mV/V/ 0.001 in
HH
±0,25 [±0.01]
48,01 [1.89]
7,88 [0.31]
10,92 [0.43]
396,89 [14]
212,62 [7.5]
4
HI
±0,51 [±0.02]
48,01 [1.89]
7,88 [0.31]
10,92 [0.43]
396,89 [14]
212,62 [7.5]
4
HK
±1,02 [±0.04]
51,05 [2.01]
7,88 [0.31]
12,95 [0.51]
510,29 [18]
212,62 [7.5]
4
HM
±2,54 [±0.1]
61 [2.40]
9,4 [0.37]
11,43 [0.45]
623,69 [22]
119,92 [4.23]
4
HN
±5,08 [±0.2]
78 [3.07]*
9,4 [0.37]
11,43 [0.45]
737,09 [26]
129,84 [4.58]
4*
HF
±7,62 [±0.3]
87,89 [3.46]
9,4 [0.37]
15,24 [0.60]
250,49 [30]
244,94 [8.64]
2
HG
±10,16 [±0.4]
99,06 [3.90]
9,4 [0.37]
19,05 [0.75]
963,88 [34]
209,79 [7.40]
2
HP
±12,7 [±0.5]
120,90 [4.76]
9,4 [0.37]
21,59 [0.85]
1190,68 [42]
214,89 [7.58]
2
* New L dimension and output sensitivity for 5,08 mm [±0.2 in] range. For old L dimension and output sensitivity, consult factory.
TYPICAL SYSTEM DIAGRAM
Nominal
electric
zero
point
Nominal
electric
zero
point
For reference only
Wire color
Supply
Red
(+) supply (calibrated @ 5 V RMS, 5 kHz)
Yellow
Supply return
Blue
Output
Green
Output return
Black
Secondary center tap (normally not connected)
5
WIRING CODES
Honeywell • Sensing and Control
3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model S5 AC-AC
Enhanced Precision Displacement Transducer
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit
www.honeywell.com/sensing or call +1-815-235-6847
Email inquiries to info.sc@honeywell.com
WARNING
PERSONAL INJURY
•DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
•The information presented in this catalogue is for
reference only. DO NOT USE this document as product
installation information.
•Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008748-1-EN IL50 GLO May 2008
Copyright © 2008 Honeywell International Inc. All rights reserved.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model MVL7 AC-AC
Long Stroke Displacement Transducer
DESCRIPTION
Model MVL7 (free unguided armature) ac-ac long stroke
achieves an impressive 0.25 % full scale non-linearities. Dis-
displacement transducer is designed for measuring static and
placement transducer bodies and probes are constructed of
dynamic displacements from ±0.5 in to ±8.0 in. This model
stainless steel for durability in harsh, industrial environments.
FEATURES
• 0.25 % non-linearity
• Stainless steel construction
•
Enhanced immunity to electrical noise
•
Infinite resolution
• 12,7 mm to 203,2 mm [0.5 in to 8.0 in] range
•
-58 °F to 257 °F operating range (standard)
• Free unguided armature
•
Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model MVL7 AC-AC
PERFORMANCE SPECIFICATIONS
RANGE CODES
Characteristic
Measure
Range Code
Available ranges
Stroke range
±12,7 mm to 203,2 mm [±0.5 in to 8.0
in]
HP
±12,7 mm [±0.5 in]
HQ
±25,4 mm [±1.0 in]
HR
±50,8 mm [±2.0 in]
HS
±76,2 mm [±3.0 in]
HT
±101,6 mm [±4.0 in]
HU
±152,4 mm [±6.0 in]
HV
±203,2 mm [±8.0 in]
Non-linearity (max.)
±0.25 % full scale
Non-repeatability (max.)
Not applicable
Output sensitivity
See table
Resolution
Infinite
ENVIRONMENTAL SPECIFICATIONS
Characteristic
Measure
Temperature, operating
-50 °C to 125 °C [-58 °F to 257 °F]
Temperature effect, zero
(max.)
0.006 % full scale/°F
Temperature effect, span
(max.)
0.006 % full scale/°F
ELECTRICAL SPECIFICATIONS
Characteristic
Measure
Element type
ac-ac displacement transducer
Input supply (calibrated)
5 V RMS @ 5 kHz
Input supply (acceptable)
1 V to 7 V RMS @ 2 kHz to 10 kHz
Electrical termination
Multiconductor shielded cable
MECHANICAL SPECIFICATIONS
Characteristic
Measure
Case material
Stainless steel
Probe material
Stainless steel
Armature type
Free unguided
Probe thread
M5 x 0.8
Weight
See table
Spring force (max.)
Not applicable
OPTION CODES
Range Code
Many range/option combinations are available in
our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/
TMsensor-ship for updated listings.
Stroke ranges
±12,7 mm to 203,2 mm [±0.5 in to 8.0 in]
Electrical
termination
Multiconductor shielded cable (1,83 m [6 ft])
TM405. Axial Bendix connector on body radial
(side)
TM406. Bendix connector on body
Electrical cable
orientation
TM49. Axial cable exit
Mounting
threads
TM511. 13/16-32 UNF
Improved
linearity
L10. ±0.1 % max. linearity (less than or equal to
±101.6 mm [±4 in])
Higher
temperature
TM315. 204 °C [400 °F] up to 101,6 mm [±4.0
in]
2 Honeywell • Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Long Stroke Displacement Transducer
MOUNTING DIMENSIONS
Range
code
Available stroke
range
L
X
Approx. body
weight
Approx. armature
weight
Typical full scale
output at
3 V RMS
HP
±12,7 mm [±0.5 in]
127 mm [5.0 in]
43,18 mm [1.7 in]
170,1 g [6 oz]
35,44 g [1.25 oz]
2.4 V RMS
HQ
±25,4 mm [±1.0 in]
152,4 mm [6.0 in]
68,58 mm [2.7 in]
226,8 g [8 oz]
49,61 g [1.75 oz]
3.0 V RMS
HR
±50,8 mm [±2.0 in]
269,24 mm [10.6 in]
81,28 mm [3.2 in]
368,54 g [13 oz]
56,7 g [2.0 oz]
4.8 V RMS
HS
±76,2 mm [±3.0 in]
381 mm [15.0 in]
119,38 mm [4.7 in]
453,59 g [16 oz]
62,37 g [2.2 oz]
4.5 V RMS
HT
±101,6 mm [±4.0 in]
425,45 mm [16.75 in]
132,08 mm [5.2 in]
566,99 g [20 oz]
70,87 g [2.5 oz]
9.5 V RMS
HU
±152,4 mm [±6.0 in]
615,95 mm [24.25 in]
182,88 mm [7.2 in]
822,14 g [29 oz]
113,40 g [4.0 oz]
7.2 V RMS
HV
±203,2 mm [±8.0 in]
806,45 mm [31.75 in]
259,08 mm [10.2 in]
1190,68 g [42 oz]
144,58 g [5.1 oz]
4.8 V RMS
WIRING CODES
For reference only
Wire color
Supply
Red
(+) supply (calibrated @ 5 V RMS, 5 kHz)
Yellow
Supply return
Blue
Output
Green
Output return
Black
Secondary center tap (normally not connected)
5
TYPICAL SYSTEM DIAGRAM
Honeywell • Sensing and Control
3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model MVL7 AC-AC
Long Stroke Displacement Transducer
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit
www.honeywell.com/sensing or call +1-815-235-6847
Email inquiries to info.sc@honeywell.com
WARNING
PERSONAL INJURY
•DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
•The information presented in this catalogue is for
reference only. DO NOT USE this document as product
installation information.
•Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008752-1-EN IL50 GLO May 2008
Copyright © 2008 Honeywell International Inc. All rights reserved.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model VL7A AC-AC
Long Stroke Displacement Transducer
DESCRIPTION
Model VL7A (spring return armature) ac-ac long stroke displace-
impressive 0.25 % full scale non-linearities. Displacement trans-
ment transducer is designed for measuring static and dynamic
ducer bodies and probes are constructed of stainless steel for
displacements from ±0.5 in to ±3.0 in. This model achieve
durability in harsh, industrial environments.
FEATURES
• 0.25 % non-linearity
• Stainless steel construction
• 12,7 mm to 76,2 mm [0.5 in to 3.0 in] range
•
Enhanced immunity to electrical noise
•
Infinite resolution
•
-58 °F to 257 °F operating range (standard)
• Spring return armature
•
Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model VL7A AC-AC
PERFORMANCE SPECIFICATIONS
RANGE CODES
Characteristic
Measure
Range Code
Available ranges
Stroke range
±12,7 mm to 76,2 mm [±0.5 in to 3.0 in]
HP
±12,7 mm [±0.5 in]
Non-linearity (max.)
±0.25 % full scale
HQ
±25,4 mm [±1.0 in]
Non-repeatability (max.)
<20 microinches
HR
±50,8 mm [±2.0 in]
Output sensitivity
See table
HS
±76,2 mm [±3.0 in]
Resolution
Infinite
ENVIRONMENTAL SPECIFICATIONS
Characteristic
Measure
Temperature, operating
-50 °C to 125 °C [-58 °F to 257 °F]
Temperature effect, zero
(max.)
0.006 % full scale/°F
Temperature effect, span
(max.)
0.006 % full scale/°F
ELECTRICAL SPECIFICATIONS
Characteristic
Measure
Element type
ac-ac displacement transducer
Input supply (calibrated)
5 V RMS @ 5 kHz
Input supply (acceptable)
1 V to 7 V RMS @ 2 kHz to 10 kHz
Electrical termination
Multiconductor shielded cable
MECHANICAL SPECIFICATIONS
Characteristic
Measure
Case material
Stainless steel
Probe material
Stainless steel
Armature type
Captive guided spring return
Probe thread
Not applicable
Weight
See table
Spring force (max.)
4 oz/in
OPTION CODES
Range Code
Many range/option combinations are available in
our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/
TMsensor-ship for updated listings.
Stroke ranges
±12,7 mm to ±50,8 mm [±0.5 in to ±2.0 in];
76,2 mm [±3.0 in]
Electrical
termination
Multiconductor shielded cable (1,83 m [6 ft])
TM405. Axial Bendix connector on body radial
(side)
TM406. Bendix connector on body
Electrical cable
orientation
TM49. Axial cable exit
Mounting
threads
TM511. 13/16-32 UNF
Improved
linearity
L10. ±0.1 % max. linearity (less than or equal to
101,6 mm [±4.0 in]
Higher
temperature
TM315. 204 °C [400 °F] up to 101,6 mm [±4.0
in]
2 Honeywell • Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Long Stroke Displacement Transducer
MOUNTING DIMENSIONS
Range code
Available stroke range
L
X
Approx. unit weight
Typical full scale output
at 3 V RMS
HP
±12,7 mm [±0.5 in]
135,89 mm [5.35 in]
38,1 mm [1.5 in]
184,27 g [6.5 oz]
2.4 V RMS
HQ
±25,4 mm [±1.0 in]
161,29 mm [6.35 in]
63,5 mm [2.5 in]
226,8 g [8.0 oz]
3.0 V RMS
HR
±50,8 mm [±2.0 in]
279,4 mm [11.0 in]
76,2 mm [3.0 in]
396,89 g [14 oz]
4.8 V RMS
HS
±76,2 mm [±3.0 in]
389,89 mm [15.35 in]
114,3 mm [4.5 in]
481,94 g [17 oz]
4.5 V RMS
WIRING CODES
Wire color
Supply
Red
(+) supply (calibrated @ 3 V RMS, 5 kHz)
Yellow
Supply return
Blue
Output
Green
Output return
Black
Secondary center tap (normally not connected)
For reference only
5
TYPICAL SYSTEM DIAGRAM
AA937
Honeywell • Sensing and Control
3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model VL7A AC-AC
Long Stroke Displacement Transducer
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit
www.honeywell.com/sensing or call +1-815-235-6847
Email inquiries to info.sc@honeywell.com
WARNING
PERSONAL INJURY
•DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
•The information presented in this catalogue is for
reference only. DO NOT USE this document as product
installation information.
•Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008751-1-EN IL50 GLO May 2008
Copyright © 2008 Honeywell International Inc. All rights reserved.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model MVL7C AC-AC
Long Stroke Displacement Transducer
DESCRIPTION
Model MVL7C (captive guided armature) ac-ac long stroke
achieves an impressive 0.25 % full scale non-linearity. Displace-
displacement transducer is designed for measuring static and
ment transducer bodies and probes are constructed of stainless
dynamic displacements from ±0.5 in to ±18.5 in. This model
steel for durability in harsh, industrial environments.
FEATURES
• 0.25 % non-linearity
• Stainless steel construction
•
±18.5 in long-stroke range available
•
Enhanced immunity to electrical noise
•
Infinite resolution
• 12,7 mm to 470 mm [0.5 in to 18.5 in] range
•
-58 °F to 257 °F operating range (standard)
• Captive guided armature
•
Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model MVL7C AC-AC
PERFORMANCE SPECIFICATIONS
RANGE CODES
Characteristic
Measure
Range Code
Available ranges
Stroke range
±12,7 mm to 470 mm [±0.5 in to 18.5 in]
HP
±12,7 mm [±0.5 in]
Non-linearity (max.)
±12,5 mm to 254 mm
[±0.5 in to ±10 in]
±0.25 % full scale
HQ
±25,4 mm [±1.0 in]
HR
±50,8 mm [±2.0 in]
Non-linearity (max.)
±381 mm to 470 mm
[±15 in to 18.5 in]
±0.5 % full scale
HS
±76,2 mm [±3.0 in]
HT
±101,6 mm [±4.0 in]
Resolution
Infinite
HU
±152,4 mm [±6.0 in]
HV
±203,2 mm [±8.0 in]
HW
±254 mm [±10.0 in]
HY
±381 mm [±15.0 in]
HZ
±470 mm [±18.5 in]
ENVIRONMENTAL SPECIFICATIONS
Characteristic
Measure
Temperature, operating
-50 °C to 125 °C [-58 °F to 257 °F]
Temperature effect, zero
(max.)
0.006 % full scale/°F
Temperature effect, span
(max.)
0.006 % full scale/°F
ELECTRICAL SPECIFICATIONS
Characteristic
Measure
Element type
ac-ac displacement transducer
Input supply (calibrated)
5 V RMS @ 5 kHz
Input supply (acceptable)
1 V to 7 V RMS @ 2 kHz to 10 kHz
Electrical termination
Multiconductor shielded cable
MECHANICAL SPECIFICATIONS
Characteristic
Measure
Case material
Stainless steel
Probe material
Stainless steel
Armature type
Captive guided
Probe thread
M5 x 0.8
Weight
See table
Spring force (max.)
Not applicable
OPTION CODES
Range Code
Many range/option combinations are available in
our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/
TMsensor-ship for updated listings.
Stroke ranges
±12,7 mm to 470 mm [±0.5 in to 18.5 in]
Electrical
termination
Multiconductor shielded cable (1,83 m [6 ft])
TM405. Axial Bendix connector on body radial
(side)
TM406. Bendix connector on body
Electrical cable
orientation
TM49. Axial cable exit
Mounting
threads
TM511. 13/16-32 UNF
Improved
linearity
L10. ±0.1 % max. linearity (less than or equal to
±101.6 mm [±4 in])
Higher
temperature
TM315. 204 °C [400 °F] up to 101,6 mm
[±4.0 in]
2 Honeywell • Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Long Stroke Displacement Transducer
MOUNTING DIMENSIONS
Range code
Available stroke range
L
X
Approx. unit weight
Typical full scale output
at 3 V RMS
HP
±12,7 mm [±0.5 in]
152,4 mm [6.0 in]
38,1 mm [1.5 in]
283,5 g [10 oz]
2.4 V RMS
HQ
±25,4 mm [±1.0 in]
177,8 mm [7.0 in]
63,5 mm [2.5 in]
340,19 g [12 oz]
3.0 V RMS
HR
±50,8 mm [±2.0 in]
294,64 mm [11.6 in]
76,2 mm [3.0 in]
510,29 g [18 oz]
4.8 V RMS
HS
±76,2 mm [±3.0 in]
406,4 mm [16.0 in]
114,3 mm [4.5 in]
652,04 g [23 oz]
4.5 V RMS
HT
±101,6 mm [±4.0 in]
452,12 mm [17.8 in]
127,0 mm [5 in]
708,74 g [25 oz]
9.6 V RMS
HU
±152,4 mm [±6.0 in]
642,62 mm [25.3 in]
177,8 mm [7 in]
1020,6 g [36 oz]
7.2 V RMS
HV
±203,2 mm [±8.0 in]
833,12 mm [32.8 in]
254 mm [10 in]
1417,48 g [50 oz]
4.8 V RMS
HW
±254 mm [±10.0 in]
1028,7 mm [40.5 in]
304,8 mm [12 in]
1587,57 g [56 oz]
6.0 V RMS
HY
±381 mm [±15.0 in]
1435,1 mm [56.5 in]
406,4 mm [16 in]
2126,21 g [75 oz]
9.0 V RMS
HZ
±470 mm [±18.5 in]
1701,8 mm [67.0 in]
508 mm [20 in]
2523,11 g [89 oz]
11.1 V RMS
WIRING CODES
Wire color
Supply
Red
(+) supply (calibrated @ 5 V RMS, 5 kHz)
Yellow
Supply return
Blue
Output
Green
Output return
Black
Secondary center tap (normally not connected)
For reference only
5
TYPICAL SYSTEM DIAGRAM
Honeywell • Sensing and Control
3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model MVL7C AC-AC
Long Stroke Displacement Transducer
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit
www.honeywell.com/sensing or call +1-815-235-6847
Email inquiries to info.sc@honeywell.com
WARNING
PERSONAL INJURY
•DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
•The information presented in this catalogue is for
reference only. DO NOT USE this document as product
installation information.
•Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008753-1-EN IL50 GLO May 2008
Copyright © 2008 Honeywell International Inc. All rights reserved.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model JEC DC-DC
Long Stroke Displacement Transducer
DESCRIPTION
Models JEC (free unguided armature) dc-dc long stroke
that sensitivity will remain constant over large variations in sup-
displacement transducers utilize an improved internal circuit
ply voltage. These models require no further conditioning, thus
which incorporates both reverse polarity protection and voltage
permitting easy operation.
regulation. These features eliminate the danger of permanent
damage if supply voltage is accidentally reversed, and ensure
FEATURES
•
Stainless steel construction
•
Enhanced life cycle
•
Voltage regulation
•
Single or dual supply wiring (field selectable)
•
Reverse polarity protected
•
Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model JEC DC-DC
PERFORMANCE SPECIFICATIONS
RANGE CODES
Characteristic
Measure
Range Code
Available ranges
Stroke range
±12,7 mm to 203,2 mm [±0.5 in to 8.0
in]
HP
±12,7 mm [±0.5 in]
HQ
±25,4 mm [±1.0 in]
HR
±50,8 mm [±2.0 in]
HS
±76,2 mm [±3.0 in]
Non-linearity (max.)
±0.25 % full scale
Output load (min.)
2000 ohm with three-wire supply, 20000
ohm with floating supply
Output impedance
2 ohm
HT
±101,6 mm [±4.0 in]
Output sensitivity
±5 Vdc or 0 Vdc to 10 Vdc (field selectable)
HU
±152,4 mm [±6.0 in]
HV
±203,2 mm [±8.0 in]
Isolation
1000 V input to output
Polarity
Output is positive for outward stroke
ENVIRONMENTAL SPECIFICATIONS
OPTION CODES
Range Code
Many range/option combinations are available in
our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/
TMsensor-ship for updated listings.
Characteristic
Measure
Temperature, operating
-50 °C to 70 °C [-58 °F to 158 °F]
Stroke ranges
±12,7 mm to 203,2 mm [±0.5 in to 8.0 in]
Temperature effect, zero
(max.)
0.006 % full scale/°F
Electrical
termination
Temperature effect, span
(max.)
0.017 % full scale/°F
Multiconductor shielded cable (1.83 m [6 ft])
TM405. Axial Bendix connector on body radial
(side)
TM406. Bendix connector on body
Electrical cable
orientation
TM49. Axial cable exit
Mounting
threads
TM511. 13/16-32 UNF
Improved
linearity
L10. ±0.1 % max. linearity (less than or equal to
±101.6 mm [±4 in])
ELECTRICAL SPECIFICATIONS
Characteristic
Measure
Element type
dc-dc displacement transducer
Power supply, single
24 Vdc to 40 Vdc @ 30 mA
Power supply, dual
±12 Vdc to ±20 Vdc @ 30 mA
Ripple power supply
30 mV peak to peak
Electrical termination
Multiconductor shielded cable (1.83 m
[6 ft])
Reverse polarity protection
Yes
MECHANICAL SPECIFICATIONS
Characteristic
Measure
Case material
Stainless steel
Probe material
Stainless steel
Armature type
Free unguided
Probe thread
M5 x 0.8
Weight
See table
Spring force (max.)
Not applicable
2 Honeywell • Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Long Stroke Displacement Transducer
MOUNTING DIMENSIONS
Range
code
Available stroke
range
L
X
Approx. body weight
Approx. armature
weight
HP
±12,7 mm [±0.5 in]
175,26 mm [6.9 in]
43,18 mm [1.7 in]
212,62 g [7.5 oz]
28,35 g [1.0 oz]
HQ
±25,4 mm [±1.0 in]
203,2 mm [8.0 in]
68,58 mm [2.7 in]
269,32 g [9.5 oz]
56,70 g [2.0 oz]
HR
±50,8 mm [±2.0 in]
317,5 mm [12.5 in]
81,28 mm [3.2 in]
368,54 g [13.0 oz]
70,87 g [2.5 oz]
HS
±76,2 mm [±3.0 in]
429,26 mm [16.9 in]
119,38 mm [4.7 in]
496,12 g [17.5 oz]
85,05 g [3.0 oz]
HT
±101,6 mm [±4.0 in]
474,98 mm [18.7 in]
132,08 mm [5.2 in]
623,69 g [22.0 oz]
99,22 g [3.5 oz]
HU
±152,4 mm [±6.0 in]
665,48 mm [26.2 in]
182,88 mm [7.2 in]
850,49 g [30.0 oz]
113,40 g [4.0 oz]
HV
±203,2 mm [±8.0 in]
855,98 mm [33.7 in]
259,08 mm [10.2 in]
1247,37 g [44.0 oz]
141,75 g [5.0 oz]
WIRING CODES
Wire
color
Dual supply
Single supply
(floating)*
Red
12 V to 20 V input
24 V to 40 V input
Blue
- 12 V to - 20 V
input
Supply negative
Black
O V, I/P, O/P common
For reference only
TYPICAL SYSTEM DIAGRAM
Outputs
Yellow
0 V to 10 V
Green
±5 Vdc
* Output common floats at voltage source/2
Honeywell • Sensing and Control 3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model JEC DC-DC
NOTES
Long Stroke Displacement Transducer
1. GM-A should not be used with an amplified displacement transducer
unless using an external power supply to power the displacement
transducer.
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit
www.honeywell.com/sensing or call +1-815-235-6847
Email inquiries to info.sc@honeywell.com
WARNING
PERSONAL INJURY
•DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
•The information presented in this catalogue is for
reference only. DO NOT USE this document as product
installation information.
•Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008763-1-EN IL50 GLO May 2008
Copyright © 2008 Honeywell International Inc. All rights reserved.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model JEC-AG DC-DC
Long Stroke Displacement Transducer
DESCRIPTION
Models JEC-AG (captive guided spring return) dc-dc long stroke
damage if supply voltage is accidentally reversed, and ensure
displacement transducer utilizes an improved internal circuit
that sensitivity will remain constant over large variations in sup-
which incorporates both reverse polarity protection and voltage
ply voltage. These models require no further conditioning, thus
regulation. These features eliminate the danger of permanent
permitting easy operation.
FEATURES
•
Stainless steel construction
•
Enhanced life cycle
•
Voltage regulation
•
Reverse polarity protected
•
Single or dual supply wiring (field selectable)
•
Captive guided spring return armature
•
Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model JEC-AG DC-DC
PERFORMANCE SPECIFICATIONS
RANGE CODES
Characteristic
Measure
Range Code
Available ranges
Stroke range
±12,7 mm to 76,2 mm [±0.5 in to 3.0 in]
HP
±12,7 mm [±0.5 in]
Non-linearity (max.)
±0.25 % full scale
HQ
±25,4 mm [±1.0 in]
Output load (min.)
2000 ohm with three-wire supply; 20000
ohm with floating supply
HR
±50,8 mm [±2.0 in]
Output impedance
2 ohm
HS
±76,2 mm [±3.0 in]
Output sensitivity
±5 Vdc or 0 Vdc to 10 Vdc (field selectable)
Isolation
1000 V input to output
Polarity
Output positive for outward stroke
ENVIRONMENTAL SPECIFICATIONS
Characteristic
Measure
Temperature, operating
-50 °C to 80 °C [-58 °F to 176 °F]
Temperature effect, zero
(max.)
0.006 % full scale/°F
Temperature effect, span
(max.)
0.017 % full scale/°F
ELECTRICAL SPECIFICATIONS
Characteristic
Measure
Element type
dc-dc displacement transducer
Power supply, single
24 Vdc to 40 Vdc @ 30 mA
Power supply, dual
±12 Vdc to ±20 Vdc @ 30 mA
Ripple
30 mV peak to peak
Electrical termination
Multiconductor shielded cable (1.83 m
[6 ft])
Reverse polarity protection
Yes
OPTION CODES
Range Code
Many range/option combinations are available in
our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/
TMsensor-ship for updated listings.
Stroke ranges
±12,7 mm [±0.5 in], ±25,4 mm [±1.0 in], ±50,8
mm [±2.0 in], 6,2 mm [3.0 in]
Electrical
termination
Multiconductor shielded cable (1.83 m [6 ft])
TM405. Axial Bendix connector on body radial
(side)
TM406. Bendix connector on body
Electrical cable
orientation
TM49. Axial cable exit
Mounting
threads
TM511. 13/16-32 UNF
Improved
linearity
L10. ±0.1 % max. linearity
MECHANICAL SPECIFICATIONS
Characteristic
Measure
Case material
Stainless steel
Probe material
Stainless steel
Armature type
Captive guided spring return
Probe thread
Not applicable
Weight
See table
Spring force (max.)
4 oz/in
2 Honeywell • Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Long Stroke Displacement Transducer
MOUNTING DIMENSIONS
Range code
Available stroke range
L
X
Approx. unit weight
HP
±12,7 mm [±0.5 in]
190,5 mm [7.5 in]
38,1 mm [1.5 in]
226,7 g [8 oz]
HQ
±25,4 mm [±1.0 in]
209,6 mm [8.25 in]
63,5 mm [2.5 in]
283,5 g [10 oz]
HR
±50,8 mm [±2.0 in]
326,39 mm [12.85 in]
76,2 mm [3.0 in]
396,9 g [14 oz]
HS
±76,2 mm [±3.0 in]
438,15 mm [17.25 in]
114,3 mm [4.5 in]
510,29 g [18 oz]
WIRING CODES
For reference only
TYPICAL SYSTEM DIAGRAM
Wire color
Dual supply
Single supply (floating)*
Red
12 V to 20 V input 24 V to 40 V input
Blue
-12 V to -20 V
input
Black
OV, I/P, O/P
common
Outputs
Supply negative
Yellow
0 V to
10 V
Green
±5 Vdc
* Output common floats at voltage source/2
Honeywell • Sensing and Control 3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model JEC-AG DC-DC
NOTES
Long Stroke Displacement Transducer
1. GM-A should not be used with an amplified displacement transducer
unless using an external power supply to power the displacement
transducer.
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit
www.honeywell.com/sensing or call +1-815-235-6847
Email inquiries to info.sc@honeywell.com
WARNING
PERSONAL INJURY
•DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
•The information presented in this catalogue is for
reference only. DO NOT USE this document as product
installation information.
•Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008762-1-EN IL50 GLO May 2008
Copyright © 2008 Honeywell International Inc. All rights reserved.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model JEC-C DC-DC
Long Stroke Displacement Transducer
DESCRIPTION
Model JEC-C (captive guided armature) dc-dc long stroke dis-
if supply voltage is accidentally reversed and ensure that sensi-
placement transducer utilizes an improved internal circuit which
tivity will remain constant over large variations in supply voltage.
incorporates both reverse polarity protection and voltage regula-
This model requires no further conditioning, thus permitting easy
tion. These features eliminate the danger of permanent damage
operation. Stroke ranges from ±0.5 in to ±18.5 in are available.
FEATURES
•
Stainless steel construction
•
±18.5 in long-stroke range available
•
Enhanced life cycle
•
Voltage regulation
•
Single or dual supply wiring (field selectable)
•
Reverse polarity protected
•
Captive guided
•
Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model JEC-C DC-DC
PERFORMANCE SPECIFICATIONS
RANGE CODES
Characteristic
Measure
Range Code
Available ranges
Stroke range
±12,7 mm to 470 mm [±0.5 in to 18.5 in]
HP
±12,7 mm [±0.5 in]
HQ
±25,4 mm [±1.0 in]
HR
±50,8 mm [±2.0 in]
HS
±76,2 mm [±3.0 in]
HT
±101,6 mm [±4.0 in]
HU
±152,4 mm [±6.0 in]
HV
±203,2 mm [±8.0 in]
HW
±254 mm [±10.0 in]
HY
±381 mm [±15.0 in]
HZ
±470 mm [±18.5 in]
Non-linearity (max.)
±12,5 mm to 254 mm
[±0.5 in to ±10 in]
±0.25 % full scale
±381 mm to 470 mm
[±15 in to 18.5 in]
±0.5 % full scale
Output load (min.)
2000 ohm with three-wire supply;
20000 ohm with floating supply
Output impedance
2 ohm
Output sensitivity
±5 Vdc or 0 Vdc to 10 Vdc
(field selectable)
Isolation
1000 V input to output
Polarity
Output positive for outward stroke
OPTION CODES
Range Code
Many range/option combinations are available in
our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/
TMsensor-ship for updated listings.
Stroke ranges
±12,7 mm to 470 mm [±0.5 in to 18.5 in]
Electrical
termination
Multiconductor shielded cable (1.83 m [6 ft])
TM405. Axial Bendix connector on body radial
(side)
TM406. Bendix connector on body
Electrical cable
orientation
TM49. Axial cable exit
Mounting
threads
TM511. 13/16-32 UNF
Improved
linearity
L10. ±0.1 % max. linearity (less than or equal to
±101.6 mm [±4 in])
ENVIRONMENTAL SPECIFICATIONS
Characteristic
Measure
Temperature, operating
-50 °C to 70 °C [-58 °F to 158 °F]
Temperature effect,
zero (max.)
0.006 % full scale/°F
Temperature effect,
span (max.)
0.017 % full scale/°F
ELECTRICAL SPECIFICATIONS
Characteristic
Measure
Element type
dc-dc displacement transducer
Power supply, single
24 Vdc to 40 Vdc @ 30 mA
Power supply, dual
±12 Vdc to ±20 Vdc @ 30 mA
Ripple
30 mV peak to peak
Electrical termination
Multiconductor shielded cable
(1.83 m [6 ft])
Reverse polarity protection
Yes
MECHANICAL SPECIFICATIONS
Characteristic
Measure
Case material
Stainless steel
Probe material
Stainless steel
Armature type
Captive guided
Probe thread
M5 x 0.8
Weight
See table
Spring force (max.)
Not applicable
2 Honeywell • Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Long Stroke Displacement Transducer
MOUNTING DIMENSIONS
Range code
Available stroke range
L
X
Approx. unit weight
HP
±12,7 mm [±0.5 in]
190,5 mm [7.5 in]
38,1 mm [1.5 in]
340,9 g [12 oz]
HQ
±25,4 mm [±1.0 in]
219,15 mm [8.5 in]
63,5 mm [2.5 in]
396,9 g [14 oz]
HR
±50,8 mm [±2.0 in]
332,74 mm [13.1 in]
76,2 mm [3.0 in]
510,29 g [18 oz]
HS
±76,2 mm [±3.0 in]
444,5 mm [17.5 in]
114,3 mm [4.5 in]
623,6 g [22 oz]
HT
±101,6 mm [±4.0 in]
490,22 mm [19.3 in]
127 mm [5.0 in]
765,4 g [27 oz]
HU
±152,4 mm [±6.0 in]
680,72 mm [26.8 in]
177,8 mm [7.0 in]
1020,5 g [36 oz]
HV
±203,2 mm [±8.0 in]
871,22 mm [34.3 in]
254 mm [10 in]
1445 g [51.0 oz]
HW
±254 mm [±10.0 in]
1066,8 mm [42.0 in]
304,8 mm [12 in]
1672 g [59.0 oz]
HY
±381 mm [±15.0 in]
1473,2 mm [58.0 in]
406,4 mm [16 in]
2211 g [78.0 oz]
HZ
±470 mm [±18.5 in]
1740 mm [68.5 in]
508 mm [20 in]
2608 g [92.0 oz]
WIRING CODES
Wire color
Dual supply
Single supply (floating)*
Red
12 V to 20 V
input
24 V to 40 V input
Blue
-12 V to -20 V
input
Supply negative
Black
OV, I/P, O/P
common
For reference only
TYPICAL SYSTEM DIAGRAM
Outputs
Yellow
0 V to 10 V
Green
±5 Vdc
* Output common floats at voltage source/2
Honeywell • Sensing and Control 3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model JEC-C DC-DC
NOTES
Long Stroke Displacement Transducer
1. GM-A should not be used with an amplified displacement transducer
unless using an external power supply to power the displacement
transducer.
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit
www.honeywell.com/sensing or call +1-815-235-6847
Email inquiries to info.sc@honeywell.com
WARNING
PERSONAL INJURY
•DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
•The information presented in this catalogue is for
reference only. DO NOT USE this document as product
installation information.
•Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008764-1-EN IL50 GLO May 2008
Copyright © 2008 Honeywell International Inc. All rights reserved.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model DLB DC-DC
Long Stroke Displacement Transducer
DESCRIPTION
Model DLB (free unguided) displacement transducer operates
digital panel meters to from a complete readout system. The
from either 5 Vdc regulated or 6 Vdc to 18 Vdc unregulated
DLB, free unguided is available with stroke ranges of ±0.5 in to
and generates an output signal of ±2 Vdc. The output signal is
±8.0 in.
electrically isolated from the input voltage and can be used with
FEATURES
•
±0.25 % non-linearity
•
±12,7 mm to ±203,2 mm [±0.5 in to ±8 in] •
Low voltage requirements
•
Easy to operate
•
Stainless steel construction
•
Reverse polarity protected
•
Single or dual supply wiring (field selectable)
•
Infinite resolution
•
Free unguided armature
•
Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model DLB DC-DC
PERFORMANCE SPECIFICATIONS
RANGE CODES
Characteristic
Measure
Range Code
Available ranges
Stroke range
±12,7 mm to 203,2 mm
[±0.5 in to 8.0 in]
HP
±12,7 mm [±0.5 in]
HQ
±25,4 mm [±1.0 in]
HR
±50,8 mm [±2.0 in]
HS
±76,2 mm [±3.0 in]
HT
±101,6 mm [±4.0 in]
HU
±152,4 mm [±6.0 in]
HV
±203,2 mm [±8.0 in]
Non-linearity (max.)
±0.25 % full scale
Output load (min.)
2000 ohm
Output impedance
2 ohm
Output sensitivity
±2 Vdc (nominal)
Isolation
1000 V input to output
Polarity
Output positive for outward stroke
ENVIRONMENTAL SPECIFICATIONS
Characteristic
Measure
Temperature, operating
-50 °C to 70 °C [-58 °F to 158 °F]
Temperature effect,
zero (max.)
0.006 % full scale/°F
Temperature effect,
span (max.)
0.017 % full scale/°F
ELECTRICAL SPECIFICATIONS
OPTION CODES
Range Code
Many range/option combinations are available in
our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/
TMsensor-ship for updated listings.
Stroke ranges
±12,7 mm to 203,2 mm [±0.5 in to 8.0 in]
Electrical
termination
Multiconductor shielded cable (1.83 m [6 ft])
TM405. Axial Bendix connector on body radial
(side)
TM406. Bendix connector on body
Electrical cable
orientation
TM49. Axial cable exit
Characteristic
Measure
Element type
dc-dc displacement transducer
5 Vdc @ 100 mA max.
Mounting
threads
TM511. 13/16-32 UNF
Input supply (acceptable),
regulated
Input supply (acceptable),
unregulated
6 V to 18 Vdc @ 100 mA max.
Improved
linearity
L10. ±0.1 % max. linearity (less than or equal to
±101.6 mm [±4 in])
Ripple
30 mV peak to peak
Electrical termination
Multiconductor shielded cable
(1.83 m [6 ft])
Reverse polarity protection
Yes
MECHANICAL SPECIFICATIONS
Characteristic
Measure
Case material
Stainless steel
Probe material
Stainless steel
Armature type
Free unguided
Probe thread
M5 x 0.8
Weight
See table
Spring force (max.)
Not applicable
2 Honeywell • Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Long Stroke Displacement Transducer
MOUNTING DIMENSIONS
Range code
Available stroke range
L
X
Approx. body weight
Approx. armature weight
HP
±12,7 mm [±0.5 in]
175,26 mm [6.9 in]
43,18 mm [1.7 in]
212,62 g [7.5 oz]
28,35 g [1.0 oz]
HQ
±25,4 mm [±1.0 in]
200,6 mm [7.9 in]
68,58 mm [2.7 in]
269,32 g [9.5 oz]
56,70 g [2.0 oz]
HR
±50,8 mm [±2.0 in]
317,5 mm [12.5 in]
81,28 mm [3.2 in]
368,54 g [13.0 oz]
70,87 g [2.5 oz]
HS
±76,2 mm [±3.0 in]
429,26 mm [16.9 in]
119,38 mm [4.7 in]
496,12 g [17.5 oz]
85,05 g [3.0 oz]
HT
±101,6 mm [±4.0 in]
472,44 mm [18.6 in]
132,08 mm [5.2 in]
623,69 g [22.0 oz]
99,22 g [3.5 oz]
HU
±152,4 mm [±6.0 in]
662,94 mm [26.1 in]
182,88 mm [7.2 in]
850,49 g [30.0 oz]
113,40 g [4.0 oz]
HV
±203,2 mm [±8.0 in]
853,44 mm [33.6 in]
259,08 mm [10.2 in]
1247,37 g [44.0 oz]
141,75 g [5.0 oz]
WIRING CODES
For reference only
TYPICAL SYSTEM DIAGRAM
Wire color
5 V supply
6 Vdc to 18 Vdc supply
Yellow
5 V input
Connect to brown
Brown
Insulate
Connect to yellow
Red
Insulate
6 Vdc to 18 Vdc
Blue
Supply common (0 V)
Supply common (0 V)
Black
Output low
Output low
Green
Output high
Output high
Shield
Instrument ground
Instrument ground
Note: Incorrect connection may cause irreparable damage, consult factory for assistance.
Honeywell • Sensing and Control 3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model DLB DC-DC
NOTES
Long Stroke Displacement Transducer
1. GM-A should not be used with an amplified displacement transducer
unless using an external power supply to power the displacement
transducer.
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit
www.honeywell.com/sensing or call +1-815-235-6847
Email inquiries to info.sc@honeywell.com
WARNING
PERSONAL INJURY
•DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
•The information presented in this catalogue is for
reference only. DO NOT USE this document as product
installation information.
•Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008760-1-EN IL50 GLO May 2008
Copyright © 2008 Honeywell International Inc. All rights reserved.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model DLE DC-DC
Long Stroke Displacement Transducer
DESCRIPTION
Model DLE (captive guided armature) operates from either 5
from the input voltage and can be used with digital panel meters
Vdc regulated or 6 Vdc to 18 Vdc unregulated and generate an
to from a complete readout system. The DLE, captive guided
output signal of ±2 Vdc. The output signal is electrically isolated
armature has stroke ranges of ±0.5 in to ±18.5 in.
FEATURES
•
±0.25 % non-linearity
• ±12,7 mm to 470 mm [±0.5 in to 18.5 in] range
•
Low voltage requirements
•
Easy to operate
•
Stainless steel construction
•
Reverse polarity protected
•
Single or dual supply wiring (field selectable)
•
Infinite resolution
•
Captive guided armature
•
Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model DLE DC-DC
PERFORMANCE SPECIFICATIONS
RANGE CODES
Characteristic
Measure
Range Code
Available ranges
Stroke range
±12,7 mm to 470 mm [±0.5 in to 18.5 in]
HP
±12,7 mm [±0.5 in]
Non-linearity (max.)
±12,5 mm to 254 mm
[±0.5 in to ±10 in]
±0.25 % full scale
HQ
±25,4 mm [±1.0 in]
HR
±50,8 mm [±2.0 in]
Non-linearity (max.)
±381 mm to 470 mm
[±15 in to 18.5 in]
±0.5 % full scale
HS
±76,2 mm [±3.0 in]
HT
±101,6 mm [±4.0 in]
Output load (min.)
2000 ohm
HU
±152,4 mm [±6.0 in]
Output impedance
2 ohm
HV
±203,2 mm [±8.0 in]
Output sensitivity
±2 Vdc (nominal)
HW
±254 mm [±10.0 in]
Isolation
1000 V input to output
HY
±381 mm [±15.0 in]
Polarity
Output positive for outward stroke
HZ
±470 mm [±18.5 in]
ENVIRONMENTAL SPECIFICATIONS
OPTION CODES
Range Code
Many range/option combinations are available in
our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/
TMsensor-ship for updated listings.
0.006 % full scale/°F
Stroke ranges
±12,7 mm to 470 mm [±0.5 in to 18.5 in]
0.017 % full scale/°F
Electrical
termination
Multiconductor shielded cable (1.83 m [6 ft])
TM405. Axial Bendix connector on body radial
(side)
TM406. Bendix connector on body
Electrical cable
orientation
TM49. Axial cable exit
Mounting
threads
TM511. 13/16-32 UNF
Improved
linearity
L10. ±0.1 % max. linearity (less than or equal to
±101.6 mm [±4 in])
Characteristic
Measure
Temperature, operating
-50 °C to 70 °C [-58 °F to 158 °F]
Temperature effect, zero
(max.)
Temperature effect, span
(max.)
ELECTRICAL SPECIFICATIONS
Characteristic
Measure
Element type
dc-dc displacement transducer
Input supply (acceptable),
regulated
5 Vdc @ 100 mA max.
Input supply (acceptable),
unregulated
6 Vdc to 18 Vdc @ 100 mA max.
Ripple
30 mV peak to peak
Electrical termination
Multiconductor shielded cable (1.83 m
[6 ft])
Reverse polarity protection
Yes
MECHANICAL SPECIFICATIONS
Characteristic
Measure
Case material
Stainless steel
Probe material
Stainless steel
Armature type
Captive guided
Probe thread
M5 x 0.8
Weight
See table
Spring force (max.)
Not applicable
2 Honeywell • Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Long Stroke Displacement Transducer
MOUNTING DIMENSIONS
Range code
Available stroke range
L
X
Approx. unit weight
HP
±12,7 mm [±0.5 in]
190,5 mm [7.5 in]
38,1 mm [1.5 in]
340,9 g [12 oz]
HQ
±25,4 mm [±1.0 in]
215,9 mm [8.5 in]
63,5 mm [2.5 in]
396,9 g [14 oz]
HR
±50,8 mm [±2.0 in]
332,74 mm [13.1 in]
76,2 mm [3.0 in]
510,29 g [18 oz]
HS
±76,2 mm [±3.0 in]
444,5 mm [17.5 in]
114,3 mm [4.5 in]
623,6 g [22 oz]
HT
±101,6 mm [±4.0 in]
490,22 mm [19.3 in]
127 mm [5.0 in]
765,4 g [27 oz]
HU
±152,4 mm [±6.0 in]
680,72 mm [26.8 in]
177,8 mm [7.0 in]
1020,5 g [36 oz]
HV
±203,2 mm [±8.0 in]
871,22 mm [34.3 in]
254 mm [10 in]
1445 g [51 oz]
HW
±254 mm [±10.0 in]
1066,8 mm [42.0 in]
304,8 mm [12 in]
1672 g [59 oz]
HY
±381 mm [±15.0 in]
1473,2 mm [58.0 in]
406,4 mm [16 in]
2211 g [78 oz]
HZ
±470 mm [±18.5 in]
1740 mm [68.5 in]
508 mm [20 in]
2608 g [92 oz]
WIRING CODES
For reference only
TYPICAL SYSTEM DIAGRAM
Wire color
5 V supply
6 Vdc to 18 Vdc supply
Yellow
5 V input
Connect to brown
Brown
Insulate
Connect to yellow
Red
Insulate
6 Vdc to 18 Vdc
Blue
Supply common (0 V)
Supply common (0 V)
Black
Output low
Output low
Green
Output high
Output high
Shield
Instrument ground
Instrument ground
Note: Incorrect connection may cause irreparable damage, consult factory for assistance.
Honeywell • Sensing and Control 3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model DLE DC-DC
NOTES
Long Stroke Displacement Transducer
1. GM-A should not be used with an amplified displacement transducer
unless using an external power supply to power the displacement
transducer.
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit
www.honeywell.com/sensing or call +1-815-235-6847
Email inquiries to info.sc@honeywell.com
WARNING
PERSONAL INJURY
•DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
•The information presented in this catalogue is for
reference only. DO NOT USE this document as product
installation information.
•Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008761-1-EN IL50 GLO May 2008
Copyright © 2008 Honeywell International Inc. All rights reserved.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model DLF DC-DC
Long Stroke Displacement Transducer
DESCRIPTION
Model DLF (captive guided spring return) operates from either 5
from the input voltage and can be used with digital panel meters
Vdc regulated or 6 Vdc to 18 Vdc unregulated and generate an
to from a complete readout system. The DLF, captive guided
output signal of ±2 Vdc. The output signal is electrically isolated
spring return, from 0.5 in to 3.0 in.
FEATURES
•
±0.25 % non-linearity
• ±12,7 mm to 76,2 mm [±0.5 in to 3.0 in] range
•
Low voltage requirements
•
Easy to operate
•
Stainless steel construction
•
Reverse polarity protected
•
Single or dual supply wiring (field selectable)
•
Infinite resolution
•
Captive guided spring return armature
•
Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model DLF DC-DC
PERFORMANCE SPECIFICATIONS
RANGE CODES
Characteristic
Measure
Range Code
Available ranges
Stroke range
±12,7 mm to 76,2 mm [±0.5 in to 3 in]
HP
±12,7 mm [±0.5 in]
Non-linearity (max.)
±0.25 % full scale
HQ
±25,4 mm [±1.0 in]
Output load (min.)
2000 ohm
HR
±50,8 mm [±2.0 in]
Output impedance
2 ohm
HS
±76,2 mm [±3.0 in]
Output sensitivity
±2 Vdc (nominal)
Isolation
1000 V input to output
Polarity
Output positive for outward stroke
OPTION CODES
Range Code
Many range/option combinations are available in
our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/
TMsensor-ship for updated listings.
ENVIRONMENTAL SPECIFICATIONS
Characteristic
Measure
Stroke ranges
±12,7 mm to 76,2 mm [±0.5 in to 3 in]
Temperature, operating
-50 °C to 70 °C [-58 °F to 158 °F]
Temperature effect, zero
(max.)
0.006 % full scale/°F
Electrical
termination
Temperature effect, span
(max.)
0.017 % full scale/°F
Multiconductor shielded cable (1.83 m [6 ft])
TM405. Axial Bendix connector on body radial
(side)
TM406. Bendix connector on body
Electrical cable
orientation
TM49. Axial cable exit
Mounting
threads
TM511. 13/16-32 UNF
Improved
linearity
L10. ±0.1 % max. linearity
ELECTRICAL SPECIFICATIONS
Characteristic
Measure
Element type
dc-dc displacement transducer
Input supply (acceptable),
regulated
5 Vdc @ 100 mA max.
Input supply (acceptable),
unregulated
6 Vdc to 18 Vdc @ 100 mA max.
Ripple
30 mV peak to peak
Electrical termination
Multiconductor shielded cable (1.83 m
[6 ft])
Reverse polarity protection
Yes
MECHANICAL SPECIFICATIONS
Characteristic
Measure
Case material
Stainless steel
Probe material
Stainless steel
Armature type
Captive guided spring return
Probe thread
N/A
Weight
See table
Spring force (max.)
4.0 oz/in
2 Honeywell • Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Long Stroke Displacement Transducer
MOUNTING DIMENSIONS
Range code
Available stroke range
L
X
Approx. unit weight
HP
±12,7 mm [±0.5 in]
184,15 mm [7.25 in]
38,1 mm [1.5 in]
226,7 g [8 oz]
HQ
±25,4 mm [±1.0 in]
209,6 mm [8.25 in]
63,5 mm [2.5 in]
283,5 g [10 oz]
HR
±50,8 mm [±2.0 in]
326,39 mm [12.85 in]
76,2 mm [3.0 in]
396,9 g [14 oz]
HS
±76,2 mm [±3.0 in]
438,15 mm [17.25 in]
114,3 mm [4.5 in]
510,29 g [18 oz]
WIRING CODES
For reference only
TYPICAL SYSTEM DIAGRAM
Wire color
5 V supply
6 Vdc to 18 Vdc supply
Yellow
5 V input
Connect to brown
Brown
Insulate
Connect to yellow
Red
Insulate
6 Vdc to 18 Vdc
Blue
Supply common (0 V)
Supply common (0 V)
Black
Output low
Output low
Green
Output high
Output high
Shield
Instrument ground
Instrument ground
Note: Incorrect connection may cause irreparable damage, consult factory for assistance.
Honeywell • Sensing and Control 3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model DLF DC-DC
NOTES
Long Stroke Displacement Transducer
1. GM-A should not be used with an amplified displacement transducer
unless using an external power supply to power the displacement
transducer.
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit
www.honeywell.com/sensing or call +1-815-235-6847
Email inquiries to info.sc@honeywell.com
WARNING
PERSONAL INJURY
•DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
•The information presented in this catalogue is for
reference only. DO NOT USE this document as product
installation information.
•Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008759-1-EN IL50 GLO May 2008
Copyright © 2008 Honeywell International Inc. All rights reserved.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model LW7S AC-AC
Submersible* Displacement Transducer
DESCRIPTION
Model LW7S submersible displacement transducer is often ideal
ing linear displacement device or positional feedback element
for drilling, mining, and hydraulic engineering applications which
in dynamic systems. They are suitable for submersion in fresh
require a displacement transducer with a stainless steel, water-
water and some corrosive fluids for long periods.
proof construction. This model may be used as direct measur-
FEATURES
•
±0.25 % non-linearity
• Submersible
• Stainless steel construction
•
±12,7 mm to 76,2 mm range [±0.5 in to ±3.0 in range]
• Enhanced immunity to electrical noise
•
Submersible mating connector with 5 m {16 ft] cable
•
Easy to operate
•
Captive guided spring return armature
•
Infinite resolution
• Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model LW7S AC-AC
PERFORMANCE SPECIFICATIONS
RANGE CODES
Characteristic
Measure
Range Code
Available ranges
Stroke range
±12,7 mm to 76,2 mm [±0.5 in to 3.0 in]
HP
±12,7 mm [±0.5 in]
Non-linearity (max.)
±0.25 % full scale
HQ
±25,4 mm [±1.0 in]
Non-repeatability (max.)
<20 microinches
HR
±50,8 mm [±2.0 in]
Output sensitivity
See table
HS
±76,2 mm [±3.0 in]
Resolution
Infinite
ENVIRONMENTAL SPECIFICATIONS
OPTION CODES
Range Code
Many range/option combinations are available in
our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/
TMsensor-ship for updated listings.
Characteristic
Measure
Temperature, operating
-40 °C to 90 °C [-40 °F to 194 °F]
Temperature effect, zero
(max.)
0.005 % full scale/°F
Stroke ranges
±12,7 mm to 76,2 mm [±0.5 in to 3 in]
Temperature effect, span
(max.)
0.005 % full scale/°F
Electrical
termination
Pressure rating, standard
150 psi, up to 3000 psi with cable options
Multiconductor shielded cable (1.83 m [6.0 ft])
OPT1. No connector or cable, terminated with
soldier pins
OPT5. Mineral insulated welded stainless steel
sheathed cable (3 mm [0.12 in] dia. cable, 50
m [1 ft to 164 ft] lengths available, -55 °C to 200
°C [-67 °F to 390 °F], 200 bar [3000 psi]
Electrical cable
orientation
OPT7. Radial output submersible connector
with 5.03 m [16.5 ft] cable
Improved
linearity
L10. ±0.1 % max. linearity (less than or equal to
±101.6 mm [±4 in])
Higher
temperature
TM315. 204 °C [400 °F] (less than or equal to
±101.6 mm [±4 in])
ELECTRICAL SPECIFICATIONS
Characteristic
Measure
Element type
ac-ac displacement transducer
Input supply (calibrated)
5 V RMS @ 5 kHz
Input supply (acceptable)
1 V to 7 V RMS @ 5 kHz
Output load (minimum)
100000 ohm
Electrical termination
Submersible mating connector with 5.03
m [16.5 ft] cable
MECHANICAL SPECIFICATIONS
Characteristic
Measure
Case material
Stainless steel
Probe material
Stainless steel
Armature type
Captive guided spring return
Probe thread
Not applicable
Spring force (max.)
4 oz/in
2 Honeywell • Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Submersible* Displacement Transducer
MOUNTING DIMENSIONS
Range
code
Available stroke
range
L
X
Spring force oz/in
Typical full scale
output at 5 V RMS
HP
±12,7 mm [±0.5 in]
152,90 mm [6.02 in]
38,1 mm [1.5 in]
4
3.5 V RMS
HQ
±25,4 mm [±1.0 in]
180,85 mm [7.12 in]
63,5 mm [2.5 in]
4
4.5 V RMS
HR
±50,8 mm [±2.0 in]
304,04 mm [11.97 in]
76,2 mm [3.0 in]
4
7.6 V RMS
HS
±76,2 mm [±3.0 in]
419,86 mm [16.53 in]
114,3 mm [4.5 in]
4
7.5 V RMS
WIRING CODES
Wire color
Dual power supply
Brown
Supply
White
Supply return
Blue
Output
Black
Output return
For reference only
5
TYPICAL SYSTEM DIAGRAM
Honeywell • Sensing and Control 3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model LW7S AC-AC
NOTES
Submersible* Displacement Transducer
* Not recommended for salt water use. Consult factory for saltwater
submersible applications.
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit
www.honeywell.com/sensing or call +1-815-235-6847
Email inquiries to info.sc@honeywell.com
WARNING
PERSONAL INJURY
•DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
•The information presented in this catalogue is for
reference only. DO NOT USE this document as product
installation information.
•Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008743-1-EN IL50 GLO May 2008
Copyright © 2008 Honeywell International Inc. All rights reserved.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model LW7C AC-AC
Submersible* Displacement Transducer
DESCRIPTION
Model LW7C submersible displacement transducer is often ideal
linear displacement device or positional feedback element in dy-
for drilling, mining, and hydraulic engineering applications which
namic systems. They are suitable for submersion in fresh water
require a displacement transducer with a stainless steel, water-
and some corrosive fluids for long periods. The captive guided
proof construction. This model may be used as direct measuring
spring return armature is fitted with a ball ended probe.
FEATURES
•
±0.25 % non-linearity
• Submersible
• Stainless steel construction
• ±12,7 mm to 101,6 mm range [±0.5 in to ±4.0 in range]
• Enhanced immunity to electrical noise
•
Submersible mating connector with 5 m {16 ft] cable
•
Easy to operate
•
Captive guided armature
•
Infinite resolution
• Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model LW7C AC-AC
PERFORMANCE SPECIFICATIONS
RANGE CODES
Characteristic
Measure
Range Code
Available ranges
Stroke range
±12,7 mm to 101,6 mm [±0.5 in to 4.0
in]
HP
±12,7 mm [±0.5 in]
HQ
±25,4 mm [±1.0 in]
HR
±50,8 mm [±2.0 in]
HS
±76,2 mm [±3.0 in]
HT
±101,6 mm [±4.0 in]
Non-linearity (max.)
±0.25 % full scale
Output sensitivity
See table
Resolution
Infinite
ENVIRONMENTAL SPECIFICATIONS
Characteristic
Measure
Temperature, operating
-40 °C to 90 °C [-40 °F to 194 °F]
Temperature effect, zero
(max.)
0.005 % full scale/°F
Temperature effect, span
(max.)
0.005 % full scale/°F
Pressure rating, standard
150 psi, up to 3000 psi with cable options
OPTION CODES
Range Code
Many range/option combinations are available in
our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/
TMsensor-ship for updated listings.
Stroke ranges
±12,7 mm to 101,6 mm [±0.5 in to 4 in]
Electrical
termination
Multiconductor shielded cable (1.83 m [6.0 ft])
OPT1. No connector or cable, terminated with
soldier pins
OPT5. Mineral insulated welded stainless steel
sheathed cable (3 mm [0.12 in] dia. cable, 50
m [1 ft to 164 ft] lengths available, -55 °C to 200
°C [-67 °F to 390 °F], 200 bar [3000 psi]
Electrical cable
orientation
OPT7. Radial output submersible connector
with 5.03 m [16.5 ft] cable
Improved
linearity
L10. ±0.1 % max. linearity (less than or equal to
±101.6 mm [±4 in])
Higher
temperature
TM315. 204 °C [400 °F] (less than or equal to
±101.6 mm [±4 in])
ELECTRICAL SPECIFICATIONS
Characteristic
Measure
Element type
ac-ac displacement transducer
Input supply (calibrated)
5 V RMS @ 5 kHz
Input supply (acceptable)
1 V to 7 V RMS @ 5 kHz
Output load (minimum)
100000 ohm
Electrical termination
Submersible mating connector with 5.03
m [16.5 ft] cable
MECHANICAL SPECIFICATIONS
Characteristic
Measure
Case material
Stainless steel
Probe material
Stainless steel
Armature type
Captive guided
Probe thread
M5 x 0.8
Spring force (max.)
Not applicable
2 Honeywell • Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Submersible* Displacement Transducer
MOUNTING DIMENSIONS
Range
code
Available stroke
range
L
X
Weight armature
Typical full scale
output at 5 V RMS
HP
±12,7 mm [±0.5 in]
152,90 mm [6.02 in]
38,1 mm [1.5 in]
21,26 g [0.75 oz]
3.5 V RMS
HQ
±25,4 mm [±1.0 in]
180,85 mm [7.12 in]
63,5 mm [2.5 in]
28,35 g [1.0 oz]
4.5 V RMS
HR
±50,8 mm [±2.0 in]
304,04 mm [11.97 in]
76,2 mm [3.0 in]
42,52 g [1.5 oz]
7.6 V RMS
HS
±76,2 mm [±3.0 in]
419,86 mm [16.53 in]
114,3 mm [4.5 in]
85,05 g [3.0 oz]
7.5 V RMS
HT
±101,6 mm [±4.0 in]
452,88 mm [17.83 in]
127 mm [5.0 in]
104,89 g [3.7 oz]
16.05 V RMS
WIRING CODES
Wire color
Dual power supply
Brown
Supply
White
Supply return
Blue
Output
Black
Output return
For reference only
5
TYPICAL SYSTEM DIAGRAM
Honeywell • Sensing and Control 3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model LW7C AC-AC
NOTES
Submersible* Displacement Transducer
* Not recommended for salt water use. Consult factory for saltwater
submersible applications.
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit
www.honeywell.com/sensing or call +1-815-235-6847
Email inquiries to info.sc@honeywell.com
WARNING
PERSONAL INJURY
•DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
•The information presented in this catalogue is for
reference only. DO NOT USE this document as product
installation information.
•Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008744-1-EN IL50 GLO May 2008
Copyright © 2008 Honeywell International Inc. All rights reserved.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model LW7U AC-AC
Submersible* Displacement Transducer
DESCRIPTION
Model LW7U submersible displacement transducer is often ideal
ing linear displacement device or positional feedback element
for drilling, mining, and hydraulic engineering applications which
in dynamic systems. They are suitable for submersion in fresh
require a displacement transducer with a stainless steel, water-
water and some corrosive fluids for long periods.
proof construction. This model may be used as direct measur-
FEATURES
•
±0.25 % non-linearity
• Submersible
• Stainless steel construction
• ±12,7 mm to 101,6 mm range [±0.5 in to ±4.0 in range]
• Enhanced immunity to electrical noise
•
Submersible mating connector with 5 m {16 ft] cable
•
Easy to operate
• Free unguided armature
•
Infinite resolution
• Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model LW7U AC-AC
PERFORMANCE SPECIFICATIONS
RANGE CODES
Characteristic
Measure
Range Code
Available ranges
Stroke range
±12,7 mm to 101,6 mm [±0.5 in to 4.0
in]
HP
±12,7 mm [±0.5 in]
HQ
±25,4 mm [±1.0 in]
HR
±50,8 mm [±2.0 in]
HS
±76,2 mm [±3.0 in]
HT
±101,6 mm [±4.0 in]
Non-linearity (max.)
±0.25 % full scale
Output sensitivity
See table
Resolution
Infinite
ENVIRONMENTAL SPECIFICATIONS
Characteristic
Measure
Temperature, operating
-40 °C to 90 °C [-40 °F to 194 °F]
Temperature effect, zero
(max.)
0.005 % full scale/°F
Temperature effect, span
(max.)
0.005 % full scale/°F
Pressure rating, standard
150 psi, up to 3000 psi with cable options
OPTION CODES
Range Code
Many range/option combinations are available in
our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/
TMsensor-ship for updated listings.
Stroke ranges
±12,7 mm to 101,6 mm [±0.5 in to 4 in]
Electrical
termination
Submersible mating connector with 1.83 m [6.0
ft] cable
OPT1. No connector or cable,terminated with
soldier pins
OPT5. Mineral insulated welded stainless steel
sheathed cable (3 mm [0.12 in] dia. cable, 50
m [1 ft to 164 ft] lengths available, -55 °C to 200
°C [-67 °F to 390 °F], 200 bar [3000 psi]
Electrical cable
orientation
OPT7. Radial output submersible connector
with 5.03 m [16.5 ft] cable
Improved
linearity
L10. ±0.1 % max. linearity (less than or equal to
±101.6 mm [±4 in])
Higher
temperature
TM315. 204 °C [400 °F] (less than or equal to
±101.6 mm [±4 in])
ELECTRICAL SPECIFICATIONS
Characteristic
Measure
Element type
ac-ac displacement transducer
Input supply (calibrated)
5 V RMS @ 5 kHz
Input supply (acceptable)
1 V to 7 V RMS @ 5 kHz
Output load (minimum)
100000 ohm
Electrical termination
Submersible mating connector with 5.03
m [16.5 ft] cable
MECHANICAL SPECIFICATIONS
Characteristic
Measure
Case material
Stainless steel
Probe material
Stainless steel
Armature type
Free unguided
Probe thread
M5 x 0.8
Spring force (max.)
Not applicable
2 Honeywell • Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Submersible* Displacement Transducer
MOUNTING DIMENSIONS
Range
code
Available stroke
range
L
X
Weight armature
Typical full scale
output at 5 V RMS
HP
±12,7 mm [±0.5 in]
152,90 mm [6.02 in]
38,1 mm [1.5 in]
21,26 g [0.75 oz]
3.5 V RMS
HQ
±25,4 mm [±1.0 in]
180,85 mm [7.12 in]
63,5 mm [2.5 in]
28,35 g [1.0 oz]
4.5 V RMS
HR
±50,8 mm [±2.0 in]
304,04 mm [11.97 in]
76,2 mm [3.0 in]
42,52 g [1.5 oz]
7.6 V RMS
HS
±76,2 mm [±3.0 in]
419,86 mm [16.53 in]
114,3 mm [4.5 in]
85,05 g [3.0 oz]
7.5 V RMS
HT
±101,6 mm [±4.0 in]
452,88 mm [17.83 in]
127 mm [5.0 in]
104,89 g [3.7 oz]
16.05 V RMS
WIRING CODES
[0.06 in]
For reference only
Wire color
Dual power supply
Brown
Supply
White
Supply return
Blue
Output
Black
Output return
5
TYPICAL SYSTEM DIAGRAM
Honeywell • Sensing and Control 3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model LW7U AC-AC
NOTES
Submersible* Displacement Transducer
* Not recommended for salt water use. Consult factory for saltwater
submersible applications.
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit
www.honeywell.com/sensing or call +1-815-235-6847
Email inquiries to info.sc@honeywell.com
WARNING
PERSONAL INJURY
•DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
•The information presented in this catalogue is for
reference only. DO NOT USE this document as product
installation information.
•Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008745-1-EN IL50 GLO May 2008
Copyright © 2008 Honeywell International Inc. All rights reserved.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model DW7S DC-DC
Submersible* Displacement Transducer
DESCRIPTION
Model DW7S submersible displacement transducer is often ideal
linear displacement devices or positional feedback elements
for drilling, mining, and hydraulic engineering applications which
in dynamic systems. They are suitable for submersion in fresh
require a displacement transducer with a stainless steel, water-
water and some corrosive fluids for long periods. The captive
proof construction. This model may be used as direct measuring
guided spring return armature is fitted with a ball-ended probe.
FEATURES
•
±0.25 % non-linearity
• Submersible
• Stainless steel construction
•
Easy to operate
•
5 m [16 ft] submersible mating connector (standard)
• ±12,7 mm to 76,2 mm range [±0.5 in to ±3.0 in range]
•
Infinite resolution
•
Single or dual supply wiring (field selectable)
•
Reverse polarity protected
• Captive guided spring return armature
• Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model DW7S DC-DC
PERFORMANCE SPECIFICATIONS
RANGE CODES
Characteristic
Measure
Range Code
Available ranges
Stroke range
±12,7 mm to 76,2 mm [±0.5 in to 3 in]
HP
±12,7 mm [±0.5 in]
Non-linearity (max.)
±0.25 % full scale
HQ
±25,4 mm [±1.0 in]
Non-repeatability (max.)
<20 microinches
HR
±50,8 mm [±2.0 in]
Output sensitivity
See table
HS
±76,2 mm [±3.0 in]
ENVIRONMENTAL SPECIFICATIONS
Characteristic
Measure
Temperature, operating
-40 °C to 70 °C [-40 °F to 158 °F]
Temperature effect, zero
(max.)
0.005 % full scale/°F
Temperature effect, span
(max.)
0.015 % full scale/°F
Pressure rating, standard
150 psi, up to 3000 psi with cable options
OPTION CODES
Range Code
Many range/option combinations are available in
our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/
TMsensor-ship for updated listings.
Stroke ranges
±12,7 mm to 76,2 mm [±0.5 in to 3 in]
Electrical
termination
Submersible mating connector with 5.03 m
[16.5 ft] cable
OPT1. No connector or cable, terminated with
soldier pins
OPT5. Mineral insulated welded stainless steel
sheathed cable (3 mm [0.12 in] dia. cable, 50
m [1 ft to 164 ft] lengths available, -55 °C to
200 °C [-67 °F to 390 °F], 200 bar [3000 psi]
Electrical cable
orientation
OPT7. Radial output submersible connector
with 5.03 m [16.5 ft] cable
Improved
linearity
L10. ±0.1 % max. linearity
ELECTRICAL SPECIFICATIONS
Characteristic
Measure
Element type
dc-dc displacement transducer
Input supply (acceptable)
±10 Vdc to 20 Vdc unregulated (45 mA
max.) or
20 Vdc to 40 Vdc unregulated (45 mA
max.)
Electrical termination
Submersible mating connector with
5.03 m [16.5 ft] cable
MECHANICAL SPECIFICATIONS
Characteristic
Measure
Case material
Stainless steel
Probe material
Stainless steel
Armature type
Captive guided spring return
Probe thread
Not applicable
Spring force (max.)
4 oz/in
2 Honeywell • Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Submersible* Displacement Transducer
MOUNTING DIMENSIONS
Range code
Available stroke range
L
X
Spring force (oz/in)
Typical full scale output
HP
±12,7 mm [±0.5 in]
203,2 mm [8.00 in]
38,1 mm [1.5 in]
4
±5 Vdc
HQ
±25,4 mm [±1.0 in]
231,14 mm [9.10 in]
63,5 mm [2.5 in]
4
±5 Vdc
HR
±50,8 mm [±2.0 in]
354,33 mm [13.95 in]
76,2 mm [3.0 in]
4
±5 Vdc
HS
±76,2 mm [±3.0 in]
470,41 mm [18.52 in]
114,3 mm [4.5 in]
4
±5 Vdc
WIRING CODES
Wire color
Dual power supply
Brown
(+) supply, 10 Vdc to 20 Vdc
Blue
(-) supply, -10 Vdc to -20 Vdc
Black
(-) output common/supply return
White
(+) output, ±5 Vdc (min. 2k ohm
across black and white)
For reference only
Reverse polarity protected with voltage regulator. Cable shield is not
connected to transducer.
TYPICAL SYSTEM DIAGRAM
DC input
GM-A
Wire color
Single power supply
Brown
(+) supply, 20 Vdc to 40 Vdc
Blue
Supply return
Black
(-) output
White
(+) output, ±5 Vdc (min. 20k ohm
across black and white)
Reverse polarity protected with voltage regulator. Cable shield is not
connected to transducer. Either black or blue must float. If both are
grounded or connected together, the unit will be destroyed.
Honeywell • Sensing and Control 3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model DW7S DC-DC
NOTES
Submersible* Displacement Transducer
* Not recommended for salt water use. Consult factory for saltwater
submersible applications.
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit
www.honeywell.com/sensing or call +1-815-235-6847
Email inquiries to info.sc@honeywell.com
WARNING
PERSONAL INJURY
•DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
•The information presented in this catalogue is for
reference only. DO NOT USE this document as product
installation information.
•Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008754-1-EN IL50 GLO May 2008
Copyright © 2008 Honeywell International Inc. All rights reserved.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model DW7C DC-DC
Submersible* Displacement Transducer
DESCRIPTION
Model DW7C submersible displacement transducer is often
measuring linear displacement devices or positional feedback
ideal for drilling, mining, and hydraulic engineering applica-
elements in dynamic systems. They are suitable for submersion
tions which require a displacement transducer with a stainless
in fresh water and some corrosive fluids for long periods.
steel, waterproof construction. This model may be used as direct
FEATURES
•
±0.25 % non-linearity
• Submersible
• Stainless steel construction
•
Easy to operate
•
5 m [16 ft] submersible mating connector (standard)
• ±12,7 mm to 101,6 mm range [±0.5 in to ±4.0 in range]
•
Infinite resolution
•
Single or dual supply wiring (field selectable)
•
Reverse polarity protected
• Captive guided armature
• Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model DW7C DC-DC
PERFORMANCE SPECIFICATIONS
RANGE CODES
Measure
Range Code
Available ranges
Stroke range
±12,7 mm to 101,6 mm [±0.5 in to 4 in]
HP
±12,7 mm [±0.5 in]
Non-linearity (max.)
±0.25 % full scale
HQ
±25,4 mm [±1.0 in]
Output sensitivity
See table
HR
±50,8 mm [±2.0 in]
HS
±76,2 mm [±3.0 in]
HT
±101,6 mm [±4.0 in]
Characteristic
ENVIRONMENTAL SPECIFICATIONS
Characteristic
Measure
Temperature, operating
-40 °C to 70 °C [-40 °F to 158 °F]
Temperature effect, zero
(max.)
0.005 % full scale/°F
Temperature effect, span
(max.)
0.015 % full scale/°F
Pressure rating, standard
150 psi, up to 3000 psi with cable
options
OPTION CODES
Range Code
Many range/option combinations are available in
our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/
TMsensor-ship for updated listings.
Stroke ranges
±12,7 mm to 101,6 mm [±0.5 in to 4 in]
Electrical
termination
Submersible mating connector with 5.03 m
[16.5 ft] cable
OPT1. No connector or cable, terminated with
soldier pins
OPT5. Mineral insulated welded stainless steel
sheathed cable (3 mm [0.12 in] dia. cable,
50 m [1 ft to 164 ft] lengths available, -55 °C to
200 °C [-67 °F to 390 °F], 200 bar [3000 psi]
Electrical cable
orientation
OPT7. Radial output submersible connector
with 5.03 m [16.5 ft] cable
Improved
linearity
L10. ±0.1 % max. linearity (less than or equal
to 101,6 mm [±4.0 in]
ELECTRICAL SPECIFICATIONS
Characteristic
Measure
Element type
dc-dc displacement transducer
Input supply (acceptable)
±10 Vdc to 20 Vdc unregulated
(45 mA max.) or
20 Vdc to 40 Vdc unregulated
(45 mA max.)
Electrical termination
Submersible mating connector with
5.03 m [16.5 ft] cable
MECHANICAL SPECIFICATIONS
Characteristic
Measure
Case material
Stainless steel
Probe material
Stainless steel
Armature type
Captive guided
Probe thread
M5 x 0.8 in
Spring force (max.)
Not applicable
2 Honeywell • Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Submersible* Displacement Transducer
MOUNTING DIMENSIONS
Range code
Available stroke range
L
X
Weight armature
Typical full scale output
HP
±12,7 mm [±0.5 in]
203,2 mm [8.00 in]
38,1 mm [1.5 in]
21,26 g [0.75 oz]
±5 Vdc
HQ
±25,4 mm [±1.0 in]
231,14 mm [9.10 in]
63,5 mm [2.5 in]
28,35 g [1.0 oz]
±5 Vdc
HR
±50,8 mm [±2.0 in]
354,33 mm [13.95 in]
76,2 mm [3.0 in]
42,52 g [1.5 oz]
±5 Vdc
HS
±76,2 mm [±3.0 in]
470,41 mm [18.52 in]
114,3 mm [4.5 in]
85,05 g [3.0 oz]
±5 Vdc
HT
±101,6 mm [±4.0 in]
502,92 mm [19.80 in]
127,0 mm [5 in]
104,89 g [3.7 oz]
±5 Vdc
WIRING CODES
For reference only
Wire color
Dual power supply
Brown
(+) supply, 10 Vdc to 20 Vdc
Blue
(-) supply, -10 Vdc to -20 Vdc
Black
(-) output common/supply return
White
(+) output, ±5 Vdc (min. 2k ohm
across black and white)
Reverse polarity protected with voltage regulator. Cable shield is not
connected to transducer.
TYPICAL SYSTEM DIAGRAM
DC input
GM-A
Wire color
Single power supply
Brown
(+) supply, 20 Vdc to 40 Vdc
Blue
Supply return
Black
(-) output
White
(+) output, ±5 Vdc (min. 20k ohm
across black and white)
Reverse polarity protected with voltage regulator. Cable shield is not
connected to transducer. Either black or blue must float. If both are
grounded or connected together, the unit will be destroyed.
Honeywell • Sensing and Control 3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model DW7C DC-DC
NOTES
Submersible* Displacement Transducer
* Not recommended for salt water use. Consult factory for saltwater
submersible applications.
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit
www.honeywell.com/sensing or call +1-815-235-6847
Email inquiries to info.sc@honeywell.com
WARNING
PERSONAL INJURY
•DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
•The information presented in this catalogue is for
reference only. DO NOT USE this document as product
installation information.
•Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008756-1-EN IL50 GLO May 2008
Copyright © 2008 Honeywell International Inc. All rights reserved.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model DW7U DC-DC
Submersible* Displacement Transducer
DESCRIPTION
Model DW7U submersible displacement transducer is often
measuring linear displacement devices or positional feedback
ideal for drilling, mining, and hydraulic engineering applica-
elements in dynamic systems. They are suitable for submersion
tions which require a displacement transducer with a stainless
in fresh water and some corrosive fluids for long periods.
steel, waterproof construction. This model may be used as direct
FEATURES
•
±0.25 % non-linearity
• Submersible
• Stainless steel construction
•
Easy to operate
•
5 m [16 ft] submersible mating connector (standard)
• ±12,7 mm to 101,6 mm range [±0.5 in to ±4.0 in range]
•
Infinite resolution
•
Single or dual supply wiring (field selectable)
•
Reverse polarity protected
• Free unguided armature
• Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model DW7U DC-DC
PERFORMANCE SPECIFICATIONS
RANGE CODES
Characteristic
Measure
Range Code
Available ranges
Stroke range
±12,7 mm to 101,6 mm [±0.5 in to 4 in]
HP
±12,7 mm [±0.5 in]
Non-linearity (max.)
±0.25 % full scale
HQ
±25,4 mm [±1.0 in]
Output sensitivity
See table
HR
±50,8 mm [±2.0 in]
HS
±76,2 mm [±3.0 in]
HT
±101,6 mm [±4.0 in]
ENVIRONMENTAL SPECIFICATIONS
Characteristic
Measure
Temperature, operating
-40 °C to 70 °C [-40 °F to 158 °F]
Temperature effect, zero
(max.)
0.005 % full scale/°F
Temperature effect, span
(max.)
0.015 % full scale/°F
Pressure rating, standard
150 psi, up to 3000 psi with cable
options
OPTION CODES
Range Code
Many range/option combinations are available in
our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/
TMsensor-ship for updated listings.
Stroke ranges
±12,7 mm to 101,6 mm [±0.5 in to 4 in]
Electrical
termination
Submersible mating connector with 5.03 m
[16.5 ft] cable
OPT1. No connector or cable, terminated with
soldier pins
OPT5. Mineral insulated welded stainless steel
sheathed cable (3 mm [0.12 in] dia. cable, 50
m [1 ft to 164 ft] lengths available, -55 °C to
200 °C [-67 °F to 390 °F], 200 bar [3000 psi]
Electrical cable
orientation
OPT7. Radial output submersible connector
with 5.03 m [16.5 ft] cable
Improved
linearity
L10. ±0.1 % max. linearity (less than or equal
to 101,6 mm [±4.0 in]
ELECTRICAL SPECIFICATIONS
Characteristic
Measure
Element type
dc-dc displacement transducer
Input supply (acceptable)
±10 Vdc to 20 Vdc unregulated
(45 mA max.) or
20 Vdc to 40 Vdc unregulated
(45 mA max.)
Electrical termination
Submersible mating connector with 5.03
m [16.5 ft] cable
MECHANICAL SPECIFICATIONS
Characteristic
Measure
Case material
Stainless steel
Probe material
Stainless steel
Armature type
Free unguided
Probe thread
M5 x 0.8 in
Spring force (max.)
Not applicable
2 Honeywell • Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Submersible* Displacement Transducer
MOUNTING DIMENSIONS
Range code
Available stroke range
L
X
Weight armature
Typical full scale output
HP
±12,7 mm [±0.5 in]
203,2 mm [8.00 in]
38,1 mm [1.5 in]
21,26 g [0.75 oz]
±5 Vdc
HQ
±25,4 mm [±1.0 in]
231,14 mm [9.10 in]
63,5 mm [2.5 in]
28,35 g [1.0 oz]
±5 Vdc
HR
±50,8 mm [±2.0 in]
354,33 mm [13.95 in]
76,2 mm [3.0 in]
42,52 g [1.5 oz]
±5 Vdc
HS
±76,2 mm [±3.0 in]
470,41 mm [18.52 in]
114,3 mm [4.5 in]
85,05 g [3.0 oz]
±5 Vdc
HT
±101,6 mm [±4.0 in]
502,92 mm [19.80 in]
127,0 mm [5 in]
104,89 g [3.7 oz]
±5 Vdc
WIRING CODES
Wire color
Dual power supply
Brown
(+) supply, 10 Vdc to 20 Vdc
Blue
(-) supply, -10 Vdc to -20 Vdc
Black
(-) output common/supply return
White
(+) output, ±5 Vdc (min. 2k ohm
across black and white)
For reference only
Reverse polarity protected with voltage regulator. Cable shield is not
connected to transducer.
TYPICAL SYSTEM DIAGRAM
DC input
GM-A
Wire color
Single power supply
Brown
(+) supply, 20 Vdc to 40 Vdc
Blue
Supply return
Black
(-) output
White
(+) output, ±5 Vdc (min. 20k ohm
across black and white)
Reverse polarity protected with voltage regulator. Cable shield is not
connected to transducer. Either black or blue must float. If both are
grounded or connected together, the unit will be destroyed.
Honeywell • Sensing and Control 3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model DW7U DC-DC
NOTES
Submersible* Displacement Transducer
* Not recommended for salt water use. Consult factory for saltwater
submersible applications.
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit
www.honeywell.com/sensing or call +1-815-235-6847
Email inquiries to info.sc@honeywell.com
WARNING
PERSONAL INJURY
•DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
•The information presented in this catalogue is for
reference only. DO NOT USE this document as product
installation information.
•Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008755-1-EN IL50 GLO May 2008
Copyright © 2008 Honeywell International Inc. All rights reserved.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model MS7A AC-AC
Submersible* Displacement Transducer
DESCRIPTION
Model MS7A submersible displacement transducer is en-
cables and a waterproof outer jacket are hermetically sealed to
gineered for rugged industrial applications which require a
the transducer to allow for submersion in most liquids and cor-
waterproof transducer. This stainless steel unit is designed with
rosive fluids. These models can withstand external pressures to
permanently attached, waterproof connecting cable. Connecting
250 psi.
FEATURES
•
±0.25 % non-linearity
• Submersible
• Withstands 250 psi, external pressure
• Stainless steel construction
• ±1,02 mm to 12,7 mm [±0.04 to ± 0.50 in range]
•
-4 °F to 257 °F operating range (standard)
• Enhanced immunity to electrical noise
• Captive guided spring return armature
•
Hermetically sealed, waterproof cable 1.83 m [6 ft]
•
Easy to operate
•
Infinite resolution
• Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model MS7A AC-AC
PERFORMANCE SPECIFICATIONS
RANGE CODES
Characteristic
Measure
Range Code
Available ranges
Stroke range
±1,02 mm to 12,7 mm [±0.04 in to 0.50
in]
HK
±1,02 mm [±0.04 in]
HM
±2,54 mm [±0.10 in]
HN
±5,08 mm [±0.20 in]
HF
±7,62 mm [±0.30 in]
HG
±10,16 mm [±0.40 in]
HP
±12,7 mm [±0.50 in]
Non-linearity (max.)
±0.25 % full scale
Non-repeatability
<10 microinches
Output sensitivity
2 mV/V/ 0.001 in
Output load
100000 ohm
Resolution
Infinite
ENVIRONMENTAL SPECIFICATIONS
Characteristic
Measure
Temperature, operating
-20 °C to 125 °C [-4 °F to 257 °F]
Temperature effect, zero
(max.)
0.006 % full scale/°F
Temperature effect, span
(max.)
0.006 % full scale/°F
OPTION CODES
Range Code
Many range/option combinations are available in
our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/
TMsensor-ship for updated listings.
Stroke ranges
±1,02 mm to 12,7 mm [±0.04 in to ±0.5 in]
Electrical
termination
Hermetically sealed waterproof cable (1,83 m
[6 ft])
ELECTRICAL SPECIFICATIONS
Characteristic
Measure
Element type
ac-ac displacement transducer
Input supply (calibrated)
5 V RMS @ 5 kHz
Input supply (acceptable)
1 V to 7 V RMS @ 2 kHz to 10 kHz
Electrical termination
Hermetically sealed waterproof cable
1.83 m [6ft]
MECHANICAL SPECIFICATIONS
Characteristic
Measure
Case material
Stainless steel
Probe material
Stainless steel
Armature type
Free unguided
Probe thread
M3 X 0.5
2 Honeywell • Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Submersible* Displacement Transducer
MOUNTING DIMENSIONS
Range
code
Available
stroke range
mm [in]
L
mm [in]
D
mm [in]
X **
mm [in]
D1
mm [in]
Total weight***
g [oz]
Armature
weight
g [oz]
HK
±1,02 [±0.04]
40,89 [1.61]
8,00 [0.315]
16,99 [0.669]
2,34 [0.092]
25,51 [0.90]
3,69 [0.13]
HM
±2,54 [±0.1]
46,99 [1.85]
9,53 [0.375]
17,98 [0.708]
2,34 [0.092]
28,35 [1.00]
5,67 [0.20]
HN
±5,08 [±0.2]
50,29 [1.98]
9,53 [0.375]
22,86 [0.900]
2,34 [0.092]
32,60 [1.15]
7,09 [0.25]
HF
±7,62 [±0.3]
69,85 [2.75]
9,53 [0.375]
29,21 [1.150]
2,34 [0.092]
45,35 [1.60]
9,92 [0.35]
HG
±10,16 [±0.4]
73,91 [2.91]
9,53 [0.375]
32,51 [1.280]
2,34 [0.092]
48,19 [1.70]
10,49 [0.37]
HP
±12,7 [±0.5]
89,91 [3.54]
9,53 [0.375]
34,93 [1.375]
2,34 [0.092]
59,53 [2.10]
12,76 [0.45]
WIRING CODES
TYPICAL SYSTEM DIAGRAM
Supply
Supply (calibrated @ 5 V RMS, 5 kHz)
Yellow
Supply return
Blue
Output
Green
Output return
Black
Secondary center tap (normally not connected)
Cable shield is not connected to transducer
5
For reference only
Wire color
Red
Honeywell • Sensing and Control 3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model MS7A AC-AC
NOTES
* Not recommended for salt water use
** Dimensions at “X” at nominal electrical zero
*** Excluding cable
Submersible* Displacement Transducer
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit
www.honeywell.com/sensing or call +1-815-235-6847
Email inquiries to info.sc@honeywell.com
WARNING
PERSONAL INJURY
•DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
•The information presented in this catalogue is for
reference only. DO NOT USE this document as product
installation information.
•Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008742-1-EN IL50 GLO May 2008
Copyright © 2008 Honeywell International Inc. All rights reserved.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model S7C AC-AC
Submersible* Displacement Transducer
DESCRIPTION
Model S7C ac-ac submersible displacement transducer is
cables and a waterproof outer jacket are hermetically sealed to
engineered for rugged industrial applications which require a
the transducer to allow for submersion in most liquids and cor-
waterproof transducer. This stainless steel unit is designed with
rosive fluids. These models can withstand external pressures to
permanently attached, waterproof connecting cable. Connecting
250 psi.
FEATURES
•
±0.25 % non-linearity
• Submersible
• Withstands 250 psi, external pressure
• Stainless steel construction
• ±1,02 mm to 12,7 mm [±0.04 to ± 0.50 in range]
•
-4 °F to 257 °F operating range (standard)
• Enhanced immunity to electrical noise
• Captive guided spring return armature
•
Hermetically sealed, waterproof cable 1.83 m [6 ft]
•
Easy to operate
•
Infinite resolution
• Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model S7C AC-AC
PERFORMANCE SPECIFICATIONS
RANGE CODES
Characteristic
Measure
Range Code
Available ranges
Stroke range
±1,02 mm to 12,7 mm [±0.04 in to 0.50
in]
HK
±1,02 mm [±0.04 in]
HM
±2,54 mm [±0.10 in]
HN
±5,08 mm [±0.20 in]
HF
±7,62 mm [±0.30 in]
HG
±10,16 mm [±0.40 in]
HP
±12,7 mm [±0.50 in]
Non-linearity (max.)
±0.25 % full scale
Non-repeatability
<10 microinches
Output sensitivity
2 mV/V/ 0.001 in
Output load
100000 ohm
Resolution
Infinite
ENVIRONMENTAL SPECIFICATIONS
Characteristic
Measure
Temperature, operating
-20 °C to 125 °C [-4 °F to 257 °F]
Temperature effect, zero
(max.)
0.006 % full scale/°F
Temperature effect, span
(max.)
0.006 % full scale/°F
OPTION CODES
Range Code
Many range/option combinations are available in
our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/
TMsensor-ship for updated listings.
Stroke ranges
±1,02 mm to 12,7 mm [±0.04 in to ±0.5 in]
Electrical
termination
Hermetically sealed waterproof cable (1,83 m
[6 ft])
ELECTRICAL SPECIFICATIONS
Characteristic
Measure
Element type
ac-ac displacement transducer
Input supply (calibrated)
5 V RMS @ 5 kHz
Input supply (acceptable)
1 V to 7 V RMS @ 2 kHz to 10 kHz
Electrical termination
Hermetically sealed waterproof cable
1.83 m [6 ft]
MECHANICAL SPECIFICATIONS
Characteristic
Measure
Case material
Stainless steel
Probe material
Stainless steel
Armature type
Captive guided spring return
Probe thread
Not applicable
2 Honeywell • Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Submersible* Displacement Transducer
MOUNTING DIMENSIONS
Range code
Available stroke
range
L
D
X **
Total weight***
Max. spring force
HK
±1,02 mm
[±0.04 in]
50,8 mm
[2.00 in]
8,00 mm
[0.315 in]
11,43 mm
[0.45 in]
51,03 g
[1.8 oz]
21,62 g
[7.5 oz]
HM
±2,54 mm
[±0.1 in]
64,01 mm
[2.52 in]
9,53 mm
[0.375 in]
11.68 mm
[0.46 in]
82,21 g
[2.9 oz]
141,75 g
[5.0 oz]
HN
±5,08 mm
[±0.2 in]
69,85 mm
[2.75 in]
9,53 mm
[0.375 in]
12,19 mm
[0.48 in]
82,21 g
[2.9 oz]
141,75 g
[5.0 oz]
HF
±7,62 mm
[±0.3 in]
95,25 mm
[3.75 in]
9,53 mm
[0.375 in]
18,23 mm
[0.72 in]
110,56
[3.9 oz]
141,75 g
[5.0 oz]
HG
±10,16 mm
[±0.4 in]
106,43 mm
[4.19 in]
9,53 mm
[0.375 in]
22,1 mm
[0.87 in]
124,74 g
[4.4 oz]
141,75 g
[5.0 oz]
HP
±12,7 mm
[±0.5 in]
129,03 mm
[5.08 in]
9,53 mm
[0.375 in]
24,64 mm
[0.97 in]
153,09 g
[5.4 oz]
141,75 g
[5.0 oz]
WIRING CODES
TYPICAL SYSTEM DIAGRAM
Supply
Red
Supply (calibrated @ 5 V RMS, 5 kHz)
Yellow
Supply return
Blue
Output
Green
Output return
Black
Secondary center tap (normally not connected)
5
For reference only
Wire color
Honeywell • Sensing and Control 3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model S7C AC-AC
NOTES
* Not recommended for salt water use
** Dimensions at “X” at nominal electrical zero
*** Excluding cable
Submersible* Displacement Transducer
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit
www.honeywell.com/sensing or call +1-815-235-6847
Email inquiries to info.sc@honeywell.com
WARNING
PERSONAL INJURY
•DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
•The information presented in this catalogue is for
reference only. DO NOT USE this document as product
installation information.
•Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008741-1-EN IL50 GLO May 2008
Copyright © 2008 Honeywell International Inc. All rights reserved.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model SSA AC-AC
Sub-Sea Displacement Transducer
DESCRIPTION
Model SSA ac-ac displacement transducer is offered in ranges
sor is made from 316 SS with all-welded construction. Honeywell
from ±0.5 in up to ±4.0 in stroke length. The oceanographic type
offers in-line amplifiers and digital indicators for both LVDT mod-
of electrical plug allows the connection to be made underwater.
els that provide ±5 Vdc, 10 Vdc or 4 mA to 20 mA and RS232
This Sub-Sea displacement sensor are pressure rated to operate
outputs with zero and span adjustments.
down to a depth of 7500 feet in sea water. The body of the sen-
FEATURES
•
±1.0 % non-linearity
•
Submersible
• All welded 316 stainless steel construction
•
Easy to operate
•
Enhanced immunity to electrical noise
• Up to 2286 m [7500 ft] depth
• ±12,7 mm to 101,6 mm range [±0.5 in to ±4.0 in range]
•
Infinite resolution
• Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model SSA AC-AC
PERFORMANCE SPECIFICATIONS
RANGE CODES
Characteristic
Measure
Range Code
Available ranges
Stroke range
±12,7 mm to 101,6 mm [±0.5 in to 4.0
in]
HP
±12,7 mm [±0.5 in]
HQ
±25,4 mm [±1.0 in]
HR
±50,8 mm [±2.0 in]
HS
±76,2 mm [±3.0 in]
HT
±101,6 mm [±4.0 in]
Non-linearity (max.)
±1.0 % full scale
Output sensitivity
Consult factory; 0.3 V RMS to 3.0 V RMS
range dependent
Resolution
Infinite
ENVIRONMENTAL SPECIFICATIONS
Characteristic
Measure
Temperature, operating
-40 °C to 50 °C [-40 °F to 122 °F]
Temperature effect, zero
(max.)
0.005 % full scale/°F
Temperature effect, span
(max.)
0.005 % full scale/°F
Operating pressure
3500 psi
OPTION CODES
Range Code
Many range/option combinations are available in
our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/
TMsensor-ship for updated listings.
Stroke ranges
±12,7 mm to 101,6 mm [±0.5 in to 4 in]
Electrical
termination
Submersible, neoprene and nickel-aluminum
bronze connector molded to 1.83 m [6.0 ft] of
neoprene jacketed cable
ELECTRICAL SPECIFICATIONS
Characteristic
Measure
Element type
ac-ac displacement transducer
Input supply (acceptable)
0.5 V RMS to 7 V RMS @ 5 kHz
Ripple
Not applicable
Electrical termination
Includes submersible, neoprene, and
nickel-aluminum bronze connector
molded to 1.83 m [6 ft] of neoprene
jacketed 10,16 mm [0.40 in] diameter
cable. The electrical connector may
be mated under water up to 500 psi
or 335,28 m [1100 ft]. Longer cable
lengths are available up to 990,6 m
[3250 ft]. Consult factory for information.
MECHANICAL SPECIFICATIONS
Characteristic
Measure
Case material
316 Stainless steel with all welded
construction
Probe material
316 Stainless steel with all welded
construction
Probe thread
M10 x 1.5
2 Honeywell • Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Sub-Sea Displacement Transducer
MOUNTING DIMENSIONS
Range code
Available
stroke range
L
X
D1
D2
A
B
HP
±12,7 mm
[±0.5 in]
223,52 mm
[8.8 in]
53,34 mm
[2.1 in]
38,1 mm
[1.5 in]
9,91 mm
[0.39 in]
91,44 mm
[3.6 in]
30,48 mm
[1.2 in]
HQ
±25,4 mm
[±1.0 in]
251,46 mm
[9.9 in]
66,04 mm
[2.6 in]
38,1 mm
[1.5 in]
9,91 mm
[0.39 in]
91,44 mm
[3.6 in]
30,48 mm
[1.2 in]
HR
±50,8 mm
[±2.0 in]
345,44 mm
[13.6 in]
91,44 mm
[3.6 in]
38,1 mm
[1.5 in]
9,91 mm
[0.39 in]
91,44 mm
[3.6 in]
30,48 mm
[1.2 in]
HS
±76,2 mm
[±3.0 in]
434,34 mm
[17.1 in]
116,84 mm
[4.6 in]
38,1 mm
[1.5 in]
9,91 mm
[0.39 in]
91,44 mm
[3.6 in]
30,48 mm
[1.2 in]
HT
±101,6 mm
[±4.0 in]
535,94 mm
[21.1 in]
142,24 mm
[5.6 in]
38,1 mm
[1.5 in]
9,91 mm
[0.39 in]
91,44 mm
[3.6 in]
30,48 mm
[1.2 in]
WIRING CODES
Wire color
Dual power supply
Black
Excitation high
White
Excitation low
Red
Signal high
Green
Signal low
For reference only
TYPICAL SYSTEM DIAGRAM
Honeywell • Sensing and Control 3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model SSA AC-AC
Sub-Sea Displacement Transducer
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit
www.honeywell.com/sensing or call +1-815-235-6847
Email inquiries to info.sc@honeywell.com
WARNING
PERSONAL INJURY
•DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
•The information presented in this catalogue is for
reference only. DO NOT USE this document as product
installation information.
•Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008746-1-EN IL50 GLO May 2008
Copyright © 2008 Honeywell International Inc. All rights reserved.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model SSD DC-DC
Sub-Sea Displacement Transducer
DESCRIPTION
Model SSD dc-dc displacement transducer is offered in ranges
sor is made from 316 SS with all-welded construction. Honeywell
from ±0.5 in up to ±4.0 in stroke length. The oceanographic type
offers in-line amplifiers and digital indicators that provide ±5
of electrical plug allows the connection to be made underwater.
Vdc, 10 Vdc or 4 mA to 20 mA and RS-232 outputs with zero and
This Sub-Sea displacement sensor is pressure rated to operate
span adjustments.
down to a depth of 7500 feet in sea water. The body of the sen-
FEATURES
•
±1.0 % non-linearity
•
Submersible
• All welded 316 stainless steel construction
•
Easy to operate
• Up to 2286 m [7500 ft] depth
• ±12,7 mm to 101,6 mm range [±0.5 in to ±4.0 in range]
•
Infinite resolution
•
Single or dual supply wiring (field selectable)
•
Reverse polarity protected
• Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model SSD DC-DC
PERFORMANCE SPECIFICATIONS
RANGE CODES
Characteristic
Measure
Range Code
Available ranges
Stroke range
±12,7 mm to 101,6 mm [±0.5 in to 4 in]
HP
±12,7 mm [±0.5 in]
Non-linearity (max.)
±1.0 % full scale
HQ
±25,4 mm [±1.0 in]
Output sensitivity
±5 Vdc
HR
±50,8 mm [±2.0 in]
Resolution
Infinite
HS
±76,2 mm [±3.0 in]
HT
±101,6 mm [±4.0 in]
ENVIRONMENTAL SPECIFICATIONS
Characteristic
Measure
Temperature, operating
-40 °C to 50 °C [-40 °F to 122 °F] (Note: -9 °C to 60 °C [15 °F to 140 °F]
on 4 mA to 20 mA)
Temperature effect, zero
(max.)
0.005 % full scale/°F
Temperature effect, span
(max.)
0.015 % full scale/°F
Operating pressure
3500 psi
OPTION CODES
Range Code
Many range/option combinations are available in
our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/
TMsensor-ship for updated listings.
Stroke ranges
±12,7 mm to 101,6 mm [±0.5 in to 4 in]
Electrical
termination
Submersible, neoprene and nickel-aluminum
bronze connector molded to 1.83 m [6 ft] of neoprene jacketed cable
ELECTRICAL SPECIFICATIONS
Characteristic
Measure
Element type
dc-dc displacement transducer
Input supply (acceptable) 20 Vdc to 40 Vdc @ 25 mA
Single floating supply
Input supply (acceptable) ±10 Vdc to 20 Vdc @ 25 mA
Dual supply
Ripple
30 mV peak to peak
Electrical termination
Includes submersible, neoprene, and
nickel-aluminum bronze connector
molded to 1.83 m [6 ft] of neoprene
jacketed 10,2 mm [0.40 in] diameter
cable. The electrical connector may
be mated under water up to 500 psi
or 335,28 m [1100 ft]. Longer cable
lengths are available up to 990,6 m
[3250 ft]. Consult factory for information.
MECHANICAL SPECIFICATIONS
Characteristic
Measure
Case material
316 stainless steel with all welded
construction
Probe material
316 stainless steel with all welded
construction
Probe thread
M10 x 1.5
2 Honeywell • Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Sub-Sea Displacement Transducer
MOUNTING DIMENSIONS
Range code
Available stroke range
L
X
D1
D2
A
B
HP
±12,7 mm [±0.5 in]
223,52 mm
[8.8 in]
53,34 mm
[2.1 in]
38,1 mm
[1.5 in]
9,91 mm
[0.39 in]
91,44 mm
[3.6 in]
30,48 mm
[1.2 in]
HQ
±25,4 mm [±1.0 in]
251,46 mm
[9.9 in]
66,04 mm
[2.6 in]
38,1 mm
[1.5 in]
9,91 mm
[0.39 in]
91,44 mm
[3.6 in]
30,48 mm
[1.2 in]
HR
±50,8 mm [±2.0 in]
345,44 mm
[13.6 in]
91,44 mm
[3.6 in]
38,1 mm
[1.5 in]
9,91 mm
[0.39 in]
91,44 mm
[3.6 in]
30,48 mm
[1.2 in]
HS
±76,2 mm [±3.0 in]
434,34 mm
[17.1 in]
116,84 mm
[4.6 in]
38,1 mm
[1.5 in]
9,91 mm
[0.39 in]
91,44 mm
[3.6 in]
30,48 mm
[1.2 in]
HT
±101,6 mm [±4.0 in]
535,94 mm
[21.1 in]
142,24 mm
[5.6 in]
38,1 mm
[1.5 in]
9,91 mm
[0.39 in]
91,44 mm
[3.6 in]
30,48 mm
[1.2 in]
WIRING CODES
For reference only
Wire color or pin
Single supply*
designation
Dual supply
designation
Red or A
20 V to 40 V
10 V to 20 V
Green or B
Supply common
-10 V to -20 V
Black or C
Output common**
0 V common
White or D
Output
Output
* Supply must be fully floating
** Output common floats at V supply/2
Min 2000 ohms with dual supply, 20000 ohms with single supply
TYPICAL SYSTEM DIAGRAM
Honeywell • Sensing and Control 3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model SSD DC-DC
NOTES
Sub-Sea Displacement Transducer
1. GM-A should not be used with an amplified displacement transducer
unless using an external power supply to power the displacement
transducer.
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit
www.honeywell.com/sensing or call +1-815-235-6847
Email inquiries to info.sc@honeywell.com
WARNING
PERSONAL INJURY
•DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
•The information presented in this catalogue is for
reference only. DO NOT USE this document as product
installation information.
•Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008747-1-EN IL50 GLO May 2008
Copyright © 2008 Honeywell International Inc. All rights reserved.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model MS3 DC-DC
Miniature Displacement Transducer
DESCRIPTION
Model MS3 (free unguided armature) dc-dc miniature displace-
to larger, more expensive units. This model is compatible with
ment transducer is ideally suited for multi-point applications
dc data logging equipment used for taking readings from strain
with space constraints and provide a cost-effective alternative
gages or other dc operated transducers.
FEATURES
• Miniature design
• Cost efficient
• 0.25 % non-linearity
•
Stainless steel construction
•
±0.1 in to ±0.4 in range
•
Infinite resolution
•
Single or dual supply wiring (field selectable)
• Free unguided armature
• Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model MS3 DC-DC
PERFORMANCE SPECIFICATIONS
RANGE CODES
Characteristic
Measure
Range Code
Available ranges
Stroke range
±2,54 mm to 10,16 mm [±0.1 in to 0.4
in]
HM
±2,54 mm [±0.1 in]
HN
±5,08 mm [±0.2 in]
HF
±7,62 mm [±0.3 in]
HG
±10,16 mm [±0.4 in]
Non-linearity (max.)
±0.25 % full scale
Output impedance
2 ohm
Output load (min.)
2000 ohm
Output sensitivity
±5 Vdc or 0 Vdc to 10 Vdc (field selectable)
Resolution
Infinite
OPTION CODES
Range Code
Many range/option combinations are available in
our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/
TMsensor-ship for updated listings.
ENVIRONMENTAL SPECIFICATIONS
Characteristic
Measure
Stroke ranges
±25,4 mm to 101,6 mm [±0.1 in to 4 in]
Temperature, operating
-50 °C to 70 °C [-58 °F to 158 °F]
Temperature effect, zero
(max.)
0.006 % full scale/°F
Electrical
termination
Multiconductor shielded cable (1.83 m [6 ft])
6a. Bendix PTIH-10-6P right angle Bendix
0.017 % full scale/°F
Electrical cable
orientation
Ra. Right angle
Temperature effect, span
(max.)
Mounting
threads
13a. 1/2-20 UNF
13f. 3/8-32 UNF
Improved
linearity
L10. 0.1 % on some models
ELECTRICAL SPECIFICATIONS
Characteristic
Measure
Element type
dc-dc displacement transducer
Power supply, single
24 Vdc to 40 Vdc @ 30 mA
Power supply, dual
±12 Vdc to ±20 Vdc @ 30 mA
Electrical termination
Multiconductor shielded cable (1.83 m
[6 ft])
MECHANICAL SPECIFICATIONS
Characteristic
Measure
Case material
Stainless steel
Probe material
Stainless steel
Armature type
Free unguided
Probe thread
M3 x 0.5
Weight
73,5 g [2.6 oz]
2 Honeywell • Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Miniature Displacement Transducer
MOUNTING DIMENSIONS
WIRING CODES
Wire color
Dual supply
Single supply
(floating)*
Outputs
Red
12 V to 20 V
input
24 V to 40 V
input
Blue
-12 V to -20 V
input
Supply negative
For reference only
Black
OV, I/P, O/P common
TYPICAL SYSTEM DIAGRAM
Yellow
0 V to 10 V
Green
±5 Vdc
* Output common floats at voltage source/2
Honeywell • Sensing and Control
3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model MS3 DC-DC
NOTES
Miniature Displacement Transducer
1. GM-A should not be used with an amplified displacement transducer
unless using an external power supply to power the displacement
transducer.
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit
www.honeywell.com/sensing or call +1-815-235-6847
Email inquiries to info.sc@honeywell.com
WARNING
PERSONAL INJURY
•DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
•The information presented in this catalogue is for
reference only. DO NOT USE this document as product
installation information.
•Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008758-1-EN IL50 GLO May 2008
Copyright © 2008 Honeywell International Inc. All rights reserved.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model S3C DC-DC
Miniature Displacement Transducer
DESCRIPTION
Model S3C (captive guided spring return armature) dc-dc min-
alternative to larger, more expensive units. This model is com-
iature displacement transducer is ideally suited for multi-point
patible with dc data logging equipment used for taking readings
applications with space constraints and provide a cost-effective
from strain gages or other dc operated transducers.
FEATURES
• Miniature design
• Cost efficient
• 0.25 % non-linearity
•
Stainless steel construction
•
±0.1 in to ±0.4 in range
•
Infinite resolution
•
Single or dual supply wiring (field selectable)
• Captive guided spring return armature
• Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model S3C DC-DC
PERFORMANCE SPECIFICATIONS
RANGE CODES
Characteristic
Measure
Range Code
Available ranges
Stroke range
±2,54 mm to 10,16 mm [±0.1 in to 0.4
in]
HM
±2,54 mm [±0.1 in]
Non-linearity (max.)
±0.25 % full scale
HN
±5,08 mm [±0.2 in]
Output impedance
2 ohm
HF
±7,62 mm [±0.3 in]
Output load (min.)
2000 ohm
HG
±10,16 mm [±0.4 in]
Output sensitivity
±5 Vdc or 0 Vdc to 10 Vdc (field selectable)
Resolution
Infinite
OPTION CODES
Range Code
Many range/option combinations are available in
our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/
TMsensor-ship for updated listings.
Stroke ranges
±5,08 mm [±0.2 in], ±2,54 mm [±0.1 in], ±7,62
mm [±0.3 in], ±10,16 mm [±0.4 in]
ENVIRONMENTAL SPECIFICATIONS
Characteristic
Measure
Temperature, operating
-50 °C to 70 °C [-58 °F to 158 °F]
Temperature effect, zero
(max.)
0.006 % full scale/°F
Electrical
termination
Multiconductor shielded cable (1.83 m [6 ft])
6a. Bendix PTIH-10-6P right angle Bendix
Temperature effect, span
(max.)
0.017 % full scale/°F
Electrical cable
orientation
Ra. Right angle
Mounting
threads
13a. 1/2-20 UNF
13f. 3/8-32 UNF
Improved
linearity
L10. 0.1 % on some models
ELECTRICAL SPECIFICATIONS
Characteristic
Measure
Element type
dc-dc displacement transducer
Power supply, single
24 Vdc to 40 Vdc @ 30 mA
Power supply, dual
±12 Vdc to ±20 Vdc @ 30 mA
Electrical termination
Multiconductor shielded cable (1.83 m
[6 ft])
MECHANICAL SPECIFICATIONS
Characteristic
Measure
Case material
Stainless steel
Probe material
Stainless steel
Armature type
Captive guided spring return
Probe thread
Not applicable
Weight
82,5 g [2.91 oz]
2 Honeywell • Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Miniature Displacement Transducer
MOUNTING DIMENSIONS
WIRING CODES
Wire color Dual supply
Single supply
(floating)*
Outputs
Red
12 V to 20 V
input
24 V to 40 V
input
–
Blue
-12 V to -20 V
input
Supply negative
–
Black
OV, I/P, O/P common
–
–
For reference only
TYPICAL SYSTEM DIAGRAM
Yellow
–
–
0 V to 10 V
Green
–
–
±5 Vdc
* Output common floats at voltage source/2
Honeywell • Sensing and Control
3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model S3C DC-DC
NOTES
Miniature Displacement Transducer
1. GM-A should not be used with an amplified displacement transducer
unless using an external power supply to power the displacement
transducer.
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
WARNING
PERSONAL INJURY
•DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
Find out more
WARNING
Honeywell serves its customers
MISUSE OF DOCUMENTATION
through a worldwide network of
•The information presented in this datasheet is for
reference only. DO NOT USE this document as product
installation information.
•Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
sales offices, representatives
and distributors. For application
assistance, current specifications, pricing or name of the
nearest Authorized Distributor,
contact your local sales office.
To learn more about Honeywell’s
Failure to comply with these instructions could result in
death or serious injury.
test and measurement products,
call +1-614-850-5000, visit
www.honeywell.com/sensotec,
or e-mail inquiries to
info.tm@honeywell.com
Sensing and Control
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422
www.honeywell.com
008757-2-EN IL50 GLO September 2009
Copyright © 2009 Honeywell International Inc. All rights reserved.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model M-5C AC-AC
Miniature Displacement Transducer
DESCRIPTION
Model M-5C ac-ac miniature displacement transducers are
practical. High electrical output, exceptional linearity and
rugged, stable, and compact transducers, which provide high
infinite resolution enable these units to be effective in a variety of
accuracy static and dynamic displacement measurement.
applications. M-5C has a free unguided armature, which may be
These units are easily mounted in any position, at remote or
mounted to be virtually friction-free. The displacement transduc-
hazardous locations where direct measurement would not be
er’s body and armature are separable.
FEATURES
• Miniature design
• Rugged, enhanced accuracy
•
Enhanced immunity to electrical noise
•
±0.025 in to ±0.5 in range
•
-58 °F to 257 °F operating range (standard)
•
Extended life cycle
•
Infinite resolution
• Free unguided armature
•
Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model M-5C AC-AC
PERFORMANCE SPECIFICATIONS
RANGE CODES
Characteristic
Measure
Range Code
Available ranges
Stroke range
±2,54 mm to 12,7 mm [±0.10 in to 0.50
in]
HM
±2,54 mm [±0.10 in]
Non-linearity (max.)
±0.25 % full scale
HN
±5,08 mm [±0.20 in]
Non-repeatability
Not measureable
HF
±7,62 mm [±0.30 in]
Output sensitivity
See table
HG
±10,16 mm [±0.40 in]
Output load (min.)
100 ohm
HP
±12,7 mm [±0.50 in]
Resolution
Infinite
Phase shift
<10° @ 5 kHz
OPTION CODES
Range Code
Many range/option combinations are available in
our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/
TMsensor-ship for updated listings.
ENVIRONMENTAL SPECIFICATIONS
Characteristic
Measure
Stroke ranges
±2,54 mm to 12,7 mm [±0.1 in to ±0.5 in]
Temperature, operating
-20 °C to 125 °C [-4 °F to 257 °F]
Multiconductor shielded cable (1,83 m [6 ft])
Temperature effect, zero
(max.)
0.006 % full scale/°F
Electrical
termination
Temperature effect, span
(max.)
0.006 % full scale/°F
Electrical cable
orientation
Ra. Right angle cable exit
Mounting
threads
13g. 1/8 in BSP
Improved
linearity
L10. ±0.1 % max. linearity (less than or equal to
101,6 mm [±4.0 in]
ELECTRICAL SPECIFICATIONS
Characteristic
Measure
Element type
ac-ac displacement transducer
Input supply (calibrated)
5 V RMS @ 5 kHz
Input supply (acceptable)
1 V to 7 V RMS @ 2 kHz to 10 kHz
Electrical termination
Multiconductor shielded cable 1.83 m
[6 ft]
MECHANICAL SPECIFICATIONS
Characteristic
Measure
Case material
Stainless steel
Probe material
Stainless steel
Armature type
Free unguided
Probe thread
M3 x 0.5
Weight
See table
2 Honeywell • Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Miniature Displacement Transducer
MOUNTING DIMENSIONS
Range
code
Available
stroke range
HJ
HM
L
mm [in]
X
mm [in]
D
mm [in]
D1
mm [in]
T
mm [in]
Total
weight
g [oz]
Armature
weight
g [oz]
Output
sensitivity
mV/V/ 0.001 in
±0,635 [±0.025] 35,05 [1.38]
27,94 [1.1]
9,53 [0.375]
1,91 [0.075]
19,05 [0.75]
14,17 [0.5]
1,28 [0.045]
2
±2,54 [±0.1]
42,93 [1.69]
19,05 [0.75]
9,53 [0.375]
2,29 [0.09]
14,99 [0.59]
15,88 [0.56]
1,41 [0.05]
4
HN
±5,08 [±0.2]
55,88 [2.2*]
25,4 [1.0]
9,53 [0.375]
2,03 [0.08]
18,03 [0.71]
17,86 [0.63]
1,98 [0.07]
4*
HF
±7,62 [±0.3]
57,91 [2.28]
29,97 [1.18]
9,53 [0.375]
2,03 [0.08]
18,03 [0.71]
22,11 [0.78]
2,21 [0.078]
2
HG
±10,16 [±0.4]
63 [2.48]
32,51 [1.28]
9,53 [0.375]
2,03 [0.08]
18,03 [0.71]
28,07 [0.99]
1,9 [0.067]
2
HP
±12,7 [±0.5]
79 [3.11]
34,8 [1.37]
9,53 [0.375]
2,03 [0.08]
18,03 [0.71]
36,0 [1.27]
2,3 [0.081]
2
WIRING CODES
For reference only
Wire color
Supply
Red
(+) supply (calibrated @ 5 V RMS, 5 kHz)
Yellow
Supply return
Blue
Output
Green
Output return
Black
Secondary center tap (normally not connected)
Cable shield is not connected to transducer
5
TYPICAL SYSTEM DIAGRAM
Honeywell • Sensing and Control
3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Model M-5C AC-AC
Miniature Displacement Transducer
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit
www.honeywell.com/sensing or call +1-815-235-6847
Email inquiries to info.sc@honeywell.com
WARNING
PERSONAL INJURY
•DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
•The information presented in this catalogue is for
reference only. DO NOT USE this document as product
installation information.
•Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008750-1-EN IL50 GLO May 2008
Copyright © 2008 Honeywell International Inc. All rights reserved.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com