Cargo Handling Sheet
Caradol MD 36-21
Document date: 8 October 2014
Original document
Cargo Handling Sheet: Caradol MD 36-21
Document date: 8 October 2014
Original document
Product Details:
Product Name:
Caradol MD36-21
Shipping Name:
Glycerol Propoxylated and Ethoxylated
Chemical Family:
Polyol
Product Code:
U311E
SDS:
http://www.shell.com/chemicals/responsible-energy/msds-search.html
Physical Properties:
Density:
1030 kg/m3 @ 20 deg C.
Specific Gravity:
Dynamic Viscosity:
800 (mPas) @ 25 deg C.
Vapor Pressure:
N/A
Boiling Point:
No data
Melting Point:
N/A
Flash Point:
>180 deg C.
Notes:
Transshipments
Prior to arranging a transhipment, the Shell Chemical
Charterer must be in agreement as to Owner’s proposed plan.
Marpol Details:
Marpol Annex:
II
IMO Ship Type:
Shell Chemicals requires a ship type 2
IMO Pollution Category:
Z
Oil Like:
No
High Viscosity:
N/A
Solidifying:
N/A
USCG:
USCG group 40 not compatible with group 12
2
Cargo Handling Sheet: Caradol MD 36-21
Document date: 8 October 2014
Original document
Cargo Handling Requirements:
Prepurging of Vessel’s Tanks:
No
N2 Blanket Required:
Yes, See also Regional Requirements.
Percent Oxygen in Nitrogen Blanket:
<5%
Vapor Space Purge:
No
Loading Temperature Range:
Ambient – 40 deg C.
Transit Temperature Range:
40 - 45 deg C.
(International)
Ambient – 45 deg C.
(EU barges)
40 – 50 deg C.
(International)
Ambient – 45 deg C.
(EU barges)
Discharge Temperature Range:
Maximum Heating Coil Temperature:
70 deg C.
Adjacent Maximum Cargo Temperature:
50 deg C.
Regional Requirements:
See notes
Notes: For barge voyages in Europe Stainless steel required.
Notes: International vessels presenting coated tanks, contact local Chemicals MTA.
Notes: Loading in Europe, no wall wash required.
Notes: If Nitrogen blanket is in place and Carrier chooses to transship, carrier must reapply nitrogen blanket on the
cargo, both on the discharging and receiving ship, at their time, risk, and expense.
Tank Acceptance Requirements:
All shore and ship cargo lines and tanks, not dedicated for the product, are to be presented clean
(residual free), dry, odor free, and rust free, with good gaskets and pressure tested heating coils.
Stainless or Coated tanks:
Coated. Carrier to verify suitability of coating for product. See
also Regional Requirements notes.
Wall Wash Required:
Yes for International, see also Regional Requirement notes
3
Cargo Handling Sheet: Caradol MD 36-21
Document date: 8 October 2014
Original document
Tank Acceptance Requirements cont:
Wash Specifications:
Water Misc.
Chlorides
Odor
Permanganate
Color
Acidity
Appearance
Pass
Max 5ppm
No residual
>30 minutes
max 5
0.05 mgKOH/g max.
Clear
Maintenance of heating coils is to be verified in the ship’s log. If product is to be heated, heating
coils are to be confirmed leak free. If product is not heated, heating coils are to be drained, dried
and blanked off.
Sample testing and Product release/ Acceptance Requirements.
Loading: Shore tank approved by location based on local process. Manifold samples tested in the
field for appearance only, or according to local process. Product release based on local process.
Discharge: Product acceptance based on key tests on arrival samples from each tank based on
local process.
Safety Information and Incident Reporting.
Safety Information:
For more detailed information, refer to the SDS or e-SDS for reportable spill/release quantities
whether in the water, air or ground.
Incident Reporting:
International Registered Vessels: call Shell International Trading and Shipping in London on (44)
207-934-7777.
Jones Act Vessels: call the Shell 24 hr. incident number at 713-241-2532. The USA National
response center telephone number is 1-800-424-8802
For additional marine cargo handling advice or information, contact Captain Eddie Trotter at (+1
713 241 3535)
4
Cargo Handling Sheet: Caradol MD 36-21
Document date: 8 October 2014
Original document
Shell Chemical LP
PO Box 4407
Houston
Texas 77210
USA
Tel +1 866 897 4355
Internet http://www.shell.com/chemicals
Disclaimer
The information contained in this publication is, to the best of our knowledge, true and accurate, but any recommendations or suggestions that
may be made are without guarantee, since the conditions of use are beyond our control. Furthermore, nothing contained herein shall be
construed as a recommendation to use any product in conflict with existing patents covering any material or its use.
Shell Chemicals
The expression “Shell Chemicals” refers to the companies of the Shell Group of companies that are engaged in the chemical businesses.
Each of the companies that make up the Shell Group of companies is an independent entity and has its own separate identity.
5