MS
ANALOG INSTRUMENTS
FOR ELECTRIC MEASUREMENTS
INTRODUCTION
These precision instruments (accuracy rating of 0.5) have been
designed to be used in electrical engineering laboratories.
Losses and response times of movable components are
minimized, thus these apparatuses are light and damped,
shockproof and vibrationproof.
ELECTRICAL ENGINEERING
The cases of these instruments are of shockproof thermosetting
material. Scales are plotted with a high number of divisions; a
lot of instruments have various scales to avoid the adoption of
non integer or inconvenient constants.
Electromagnetic (or moving iron) instruments are shielded
against external magnetic fields and they have not any
hysteresis; they can be used in both DC and AC always
complying with the limits of accuracy rating.
Here are the available instruments:
• Ammeters
• Voltmeters
• Wattmeters
• Cosphimeters
• Frequency meters
• Galvanometers
• Ammeter transformers
• Shunters
INSTRUMENTS FOR IMPLEMENTING THE
EXPERIMENTAL PROGRAMS OF ELECTRIC
MEASUREMENTS AND MACHINES
(Magneto-electric) MOVING COIL AMMETER mod. LCA-1
For DC measurements; accuracy rating: ± 0.5%
Ranges: 0.6-1.2-3-6-12-30-60 mA
(range of 60 mV for shunter SH-3)
MOVING COIL AMMETER mod. LCA-2
For DC measurements; accuracy rating: ± 0.5%
Ranges: 60-120-300-600 mA - 1,2-3-6 A
(range of 60 mV for shunter SH-3)
SHUNTER mod. SH-3
Accuracy rating: ± 0.2%
Measurement range: 6-12-30-60 A
Output: 60 mV
MOVING COIL VOLTMETER mod. LCV-1
For DC measurements; accuracy rating: ± 0.5%
Ranges: 60-120-300-600 mV 1.2-3-6 V
23C-E-MS-STRUM-1
MOVING COIL VOLTMETER mod. LCV-2
For DC measurements; accuracy rating: ± 0.5%
Ranges: 6-12-60-120-300-600 V
(Electromagnetic) MOVING IRON AMMETER mod. LAA-1
For DC and AC measurements; accuracy rating: ± 0.5%
Ranges: 60-120-300-600 mA
MOVING IRON AMMETER mod. LAA-2
For DC and AC measurements; accuracy rating: ± 0.5%
Ranges: 0.6-1.2-3-6 A
ELETTRONICA VENETA S.P.A. - 31045 Motta di Livenza (TV) Italy - Via Postumia 16 - Tel. +39 0422 765 802 - Fax +39 0422 861 901 - E-mail: export@elettronicaveneta.com
MS 181
MOVING IRON VOLTMETER mod. LAV-1
For DC and AC measurements; accuracy rating: ± 0.5%
Ranges: 3-6-12-30 V
MS
MOVING IRON VOLTMETER mod. LAV-2
For DC and AC measurements; accuracy rating: ± 0.5%
Ranges: 60-120-200-600 V
ELECTRODYNAMIC WATTMETER WITH POWER
FACTOR 1 mod. LW-5/480
For DC and AC measurements; accuracy rating: ± 0.5%
Ranges: 48-120-240-480 V / 2.5-5 A
ELECTRODYNAMIC WATTMETER WITH POWER
FACTOR 1 mod. LW-1/600
For DC and AC measurements; accuracy rating: ± 0.5%
Ranges: 15-30-75-150-300-600 V / 0.5-1 A
ELECTRICAL ENGINEERING
ELECTRODYNAMIC WATTMETER WITH POWER
FACTOR 1 mod. LW-10/600
For DC and AC measurements; accuracy rating: ± 0.5%
Ranges: 15-30-75-150-300-600 V / 5-10 A
ELECTRODYNAMIC WATTMETER WITH POWER
FACTOR 0.2 mod. LW0,2-5/600
For DC and AC measurements of low power factor
Accuracy rating: ± 1%
Ranges: 15-30-75-150-300-600 V / 2.5-5 A
ELECTRODYNAMIC WATTMETER WITH POWER
FACTOR 0.2 mod. LW0,2-1/600
For DC and AC measurements of low power factor
Accuracy rating: ± 1%
Ranges: 15-30-75-150-300-600 V / 0.5-1 A
MOVING IRON SINGLE-PHASE
POWER FACTOR METER mod. COS-1/2
Accuracy rating: ± 1.5%
Voltage: 100-240-400-500 V
Current: 1-5 A
Scale: 0.2 (lag) – 1 – 0.8 (lead)
ELECTRODYNAMIC SINGLE-PHASE
POWER FACTOR METER mod. COS-1/3
Accuracy rating: ± 1.5%
Voltage: 100-240-400-500 V
Current: 1-5 A
Scale: 0.4 – 1 – 0.4
REED FREQUENCY METER mod. F-1
Accuracy rating: ± 0.5%, a row of 21 reeds
Voltage: 120-240-400-500 V
Scale: 45 to 55 Hz
REED FREQUENCY METER mod. F-2
Accuracy rating: ± 0.5%, a row of 21 reeds
Voltage: 120-240-400-500 V
Scale: 55 to 65 Hz
POINTER FREQUENCY METER mod. F-4
Accuracy rating: ± 0.5%
Voltage: 100-230-400-500 V
Scale: 45 to 55 Hz and 55 to 65 Hz
PORTABLE MEASUREMENT TRANSFORMER mod. TA-3
Accuracy rating: ± 0.5%
Primary ranges: 2.5-5-10-25-50 A (terminals), 100-150-300 A
(through hole); secondary range: 5 A
ELECTRODYNAMIC WATTMETER WITH POWER
FACTOR 0.2 mod. LW0,2-10/600
For DC and AC measurements of low power factor
Accuracy rating: ± 1%
Ranges: 15-30-75-150-300-600 V / 10 A
CENTRAL ZERO GALVANOMETER mod. LCG-2
Accuracy rating: ± 1.5%
Ranges: ± 50 – 100 – 250 - 500 µA
MOVING IRON SINGLE/THREE-PHASE
POWER FACTOR METER mod. COS-3/2
Accuracy rating: ± 1.5%
Voltage: single-phase 150-300-450-500 V
three-phase 150-300-450 V;
Current: 1-5 A
Scale: 0.2 (lag) – 1 – 0.8 (lead)
23C-E-MS-STRUM-1
MOVING IRON SINGLE/THREE-PHASE
POWER FACTOR METER mod. COS-3/3
Accuracy rating: ± 1.5%
Voltage: single-phase 150-300-450-500 V
three-phase 150-300-450 V
Current: 1-5 A
Scale: 0.4 – 1 – 0.4
MS 182
ELETTRONICA VENETA S.P.A. - 31045 Motta di Livenza (TV) Italy - Via Postumia 16 - Tel. +39 0422 765 802 - Fax +39 0422 861 901 - E-mail: export@elettronicaveneta.com