PSC Terminations Ordering InformationExternal Connectors Eyebolt All PSC terminations require a connector to make the contact from the cable conductor to the bare wire overhead system. Those terminations having an eyebolt (2-2/0) use a pin-type compression connector. This connector is available in copper, aluminum or bi-metal styles. The pin accommodates conductor 6 through 2/0. The eyebolt accommodates conductors 2 through 2/0. Threaded Stud Top Cap Clamp style or flat pad aerial lugs are available for conductor sizes 2 through 2000 kcmil. 2AWG-2000 kcmil Aerial Lug- Flat Pad Aerial Lug- Clamp style The appropriate threaded stud connector is included with each elastomer kit. Order clamp style or flat pad aerial lug as needed. Lug Fits Threaded Stud on Terminal J9280-2/78 J9280-3/78 Thread Size Lug Max. kV of Lug and Wire Rating Terminal (kcmil) 15 15 3/4-16 1-14 Lug Min. Wire (AWG) Approx. Lug No. of Net Catalog Bolt Weight No. Holes (Lbs.) Hole Dia. (In.) Approx. Net Weight (Lbs.) Lug Catalog No. 500 6 Solid 2.25 80-108 2 9/16 1 80-109 500 6 Solid 1 80-160P 2 9/16 .50 80-162P 1000 2 Solid 5 80-111 4 9/16 2.50 80-110 1000 2 Solid 1.75 80-161P 2 9/16 1 80-164P 4 9/16 2 80-163P J9280-4/78 15 1-1/2-12 2000 4/0 Str 7.75 86-33 4 9/16 4.25 86-34 J9283-2/78 25 3/4-16 500 6 Solid 2.25 80-108 2 9/16 1 80-109 1000 2 Solid 5 80-111 4 9/16 2.50 80-110 1000 2 Solid 1.75 80-161P 2 9/16 1 80-164P 4 9/16 2 80-163P 500 6 Solid 2.25 80-108 2 9/16 1 80-109 500 2 Solid 1 80-160P 2 9/16 .50 80-162P 1000 2 Solid 5 80-111 4 9/16 2.50 80-110 1000 2 Solid 1.75 80-161P 2 9/16 1 80-164P 4 9/16 2 80-163P 2000 4/0 Str 7.75 86-33 4 9/16 4.25 86-34 J9283-3/78 J9284-2/78 J9284-3/78 J9284-4 25 34.5 34.5 34.5 1-14 3/4-16 1-14 1-1/2-12 Material: High Conductivity Electrical Bronze with High Tensile Silicon Bronze Hardware or Tin Plated Aluminum as illustrated above. For Tin Plated Bronze, use above number followed by “/87D”. Page 5