Active Driver Programming Quick Sheet
MODE
The MODE key allows you to move onto the next parameter in the individual
menus
SET
The SET key allows you to quit the current menu and return to the start menu
+
Press to decrease the current parameter
Press to increase the current parameter
* when a parameter is changed it is saved immediately
First Menu
Code
SP
Hold (MODE) & (SET).
Second Menu
Code
rC
Fn
rt
od
rP
Ad
Eb
Hold (MODE), (SET), & (-) until rC appears.
Third Menu
Code
tb
t1
t2
GP
GI
FS
FL
Ft
CM
AE
Hold (MODE), (SET), & (+) until appears.
Set-point pressure
Rated current
Rated Frequency
Rotation direction
Operating mode
Fall in pressure for restarting
Multiple active driver setting
Enabling the booster
Reaction time of water low block
Running time after low pressure signal
Delay time in event of shutdown conditions
Setting the gain of the PI proportional coefficient
Setting the gain of the PI integral coefficient
Max rotation frequency
Minimum rotation frequency
Low flow rate threshold
Exchange method
Anti-block/Anti-frost Function