JINGJIANG HONGTAI CHEMICAL ENGINEERING CO., LTD.
10 Hongtai Rd., Hongguang Town, Jingjiang City, Jiangsu P.R. 214535 China
Tel:+86-523-84356552 Fax:+86-523-84353165
E-mail: jjhsche@pub.tz.jsinfo.net URL: www.bdk-hcc.com
Technical Data Sheet
No.: HTTDS-011
1. Products Identification
Chemical Name
: Benzoin
Synonyms
: 2-Hydroxy-2-Phenylacetophenone; DL-Benzoin; Ethanone etc.
CAS No.
: 119-53-9
Molecular Weight
: 212.25
Chemical Formula : C14H12O2
2. Physical and Chemical Properties
Appearance
: White or light yellow crystal powder
Odor
: no odor
Solubility
: Slightly soluble in water
Assay (G.C.)
: 99.5%min
Melting Point
: 134-137 OC (279F)
Boiling Point
: 344 OC (651F)
1
Loss on drying at 80OC
: 0.5% max
Sulphated Ash
: 0.1% max
Cyanide (ppm)
: NIL
Granulometry 60 mesh
: 99.99% min
Moisture (K.F.)
: 0.1% max
Bulk Density (G.L. Ibs/cu.ft)
: 50-60
Color (APHA)
: 10 max
Use
:Made Benzil and as a raw material for pfarmaceuticals/polydster
resins powder coatings.
3. Handling and Storage
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against
physical damage. Isolate incompatible substance. Containers of this material may be
hazardous when empty since they retain product residues(dust, solids); observe all
warnings and precautions listed for the product.
4. Important Notice
Important: The following supersedes Buyer’s documents. SELLER MAKES NO
REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED, INCLUDING OR
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. No statements
herein are to be construed as inducements to infringe any relevant patent. Under no
circumstances shall Seller be liable for incidental, consequential or indirect damages
for alleged negligence, breach of warranty, strict liability, tort or contract arising in
connection with the product(s). Buyer’s sole remedy and Seller’s sole liability for any
claims shall be Buyer’s purchase price. Data and results are based on controlled or lab
work and must be confirmed by Buyer by testing for its intended conditions of use. The
product(s) has not been tested for, and is therefore not recommended for, uses for
which prolonged contact with mucous membranes, abraded skin, or blood is intended;
or for uses for which implantation within the human body is intended.
2