Combined list of Safety items as providerd by RDSO and approved by ICF, RCF and ER. * The safety list referred to list circulated by Rly. Bd. letter No. S.No of safety List* Item Description Drawing No. SKF drg.No.1639433BC or Timken UIC Taper Roller Bearing for Dia 130 17.565 100 01 and 17.565 103 Part No. E48999 (H127746/H90010) 3.6 MM axle journal for fiat bogie 00 or Equilvalent 3.6 Bal Joint Traction Lever Specification No. MDTS-148 Rev.01 & MDTS122 Rev.'03' or latest. C53 973 Ref bred 8403 rev.02 (FF1521728 Mod 01) to be read with T.S.17.532 100 00,T.S.17.617.100 02 PL.No Category 33500071 I RCF Solid Forged Wheel (Rough Turned) 3.1 for FIAT IR Bogie. IRS-R19-93, PT-II REV3 LW02103 ALT.'f' AXLE(Semi Finished) for FIAT I R 3.1 Bogie. LW02149 ALT.'a' 33500010 II RCF RB controlled 33509025 item RCF RB controlled 33509037 item RCF NIL 33501427 II RCF NIL 33501439 II RCF 33501440 II 33502237 III RCF RCF RCF RCF A1N UIC 811-1 MDTS077 REV.03 9 (without brake disc and emergency Axle Mounted Disc Brake system for brake cable box NPZ 1-S or ALSTOM-LHB Design-AC & NAC passenger emergency pilo 3.11 Coaches. valve) MDTS077 REV.03 ( without brake disc and emergency Axle Mounted disc brake system for brake cable Box NPZ 1-S or alstom-LHB Design-Power car passenger emergency pilo 3.11 Coaches. valve) High Tensile Tightlock Centre Buffer 3.2 Coupler with AAR 'H' type head 3.34 Complete Bogie set of LHB coach. Regulated Battery Charger for LHB 4.22 AC Sleeper Coaches Solid Forged Wheel (Rough Turned) for FIAT IR Bogie (Same as 3.10 4.51 above) 4.54 Yaw Damper 4.54 Secondary Lateral Damper 4.54 Secondary Vertical Damper 4.54 Primary Vertical Damper Secondary Lateral Damper for Fiat 4.55 bogies with air spring RDSO/2011/CG-03 date of issue Oct 2011 NIL RDSO/PE/SPEC/AC/01292009,REV-0 NIL 1267400 NIL IRS-R19-93, PT-II REV3 TS17.560.100 03 TS17.560.100 03 TS17.560.100 03 TS17.560.100 03 LW02103 ALT. 'f'' LW05103 LW05100 LW05101 LW05102 33560535 I RB controlled 33509025 item 33500447 III 33500459 III 33509001 III 33501002 III TS17.560.100 03 LW05122 33502191 III RCF RCF RCF RCF RCF Primary Spring for LHB Coaches 4.55 (Inner) 17.248 100 05 (Amendment No. 1 of October,2004), colour code as per Design's letter No. MD 23151 dated 23/11/2002 & final coat shade RAL 7012 1267412 ver 05 33503047 III RCF Primary Spring for LHB Coaches 4.55 (Outer) 17.248 100 05 (Amendment No. 1 of October,2004), colour code as per Design's letter No. MD 23151 dated 23/11/2002 & final coat shade RAL 7012 1267411 ver 04 33503035 III RCF Primary Spring for generator car 4.55 (Inner) 17.248 100 05 (Amendment No. 1 of October,2004), colour code as per Design's letter No. MD 23151 dated 23/11/2002 & final coat shade RAL 7012 1277143 ver 01 33500356 III RCF Primary Spring for generator car 4.55 (Outer) 17.248 100 05 (Amendment No. 1 of October,2004), colour code as per Design's letter No. MD 23151 dated 23/11/2002 & final coat shade RAL 7012 1277142 ver 01 33500368 III RCF 17.248 100 05 (Amendment No. 1 of October,2004), 17.471 101 01 ( Amenment No.2 of January,2005) colour code as per Design's letter No. MD Secondary Spring for LHB Coaches 23151 dated 23/11/2002 & final 4.55 (Inner) coat shade RAL 7012 1269513 ver 02 33503059 III RCF 17.248 100 05 (Amendment No. 1 of October,2004), 17.471 101 01 ( Amenment No.2 of January,2005) colour code as per Design's letter No. MD Secondary Spring for LHB Coaches 23151 dated 23/11/2002 & final 4.55 (Outer) coat shade RAL 7012 1269514 ver 02 33503060 III RCF Secondary Spring for generator car 4.55 side 2 (Outer) 17.248 100 05 (Amendment No. 1 of October,2004), 17.471 101 01 (Amendment No.2 of January,2005), colour code as per Design's letter No. MD 23151 dated 23/11/2002 & final coat shade RAL 701 1268836 ver 01 33500400 III RCF Secondary Spring for generator car 4.55 side 1 (Inner) 17.248 100 05 (Amendment No. 1 of October,2004), 17.471 101 01 (Amendment No.2 of January,2005), colour code as per Design's letter No. MD 23151 dated 23/11/2002 & final coat shade RAL 701 1277145 ver 01 33500370 III RCF Secondary Spring for generator car 4.55 side 2(Inner) 17.248 100 05 (Amendment No. 1 of October,2004), 17.471 101 01 (Amendment No.2 of January,2005), colour code as per Design's letter No. MD 23151 dated 23/11/2002 & final coat shade RAL 701 1268837 ver 01 33500393 III RCF 17.248 100 05 (Amendment No. 1 of October,2004), 17.471 101 01 (Amendment No.2 of January,2005), colour code as per Design's letter No. MD 23151 dated 23/11/2002 & final coat shade RAL 701 1277146 ver 01 33500381 III RCF MPLBGASPLHB VERSION 2 EDTS215 EDTS270 TYPE-III NIL NIL NIL 33503527 III 33540226 I 33552678 I RCF RCF RCF EDTS129 REV. NIL RDSO/PE/SPEC/AC/00092008,REV-1 with AM1,RCFANNX.A NIL 33560328 I RCF NIL 33561400 I RCF Secondary Spring for generator car 4.55 side 1 (Outer) Air Spring Assly for main Line/Rajdhani LHB coaches for 4.55 FIAT type bogie. 4.1 Led type tail light with flasher unit 4.2 & 4.3 GPS based passanger information 70 AH,110V,54cells of 2V(9 module of 12 V each) maint free,pre charged 4.4 & 4.14 pure lead tin monoblock battery set 70 AH,110V,vrla lead acid maintenance free battery (9 nosx12V) RDSO/PE/SPEC/AC/0080(REV0)-2007, AM-2 WITH RCF CORP.2. NIL 33551042 I RCF RDSO/PE/TL/0158-2010,REV0, TYPE-1 NIL 33553555 I RCF 500 KVC 750V/,3 PH diesel alternator set for LHB power car 4.53 without power car and control panel RDSO/PS/SPEC/00842008,REV-0,WITH RCF ANNEXURE-2 NIL 33552836 III RCF Roof Mouted AC package unit for 4.53 LHB Railway coaches. RDSO/PE/SPEC/AC/00612005(REV0)WITHAMENDMENT-3(TYPE1) AND RDSO LETTER No.EL/7.2.2/MOTOR DATED 12.09.2011 NIL 33560160 III RCF 33560572 I RCF 38034633 I ER 38034645 I ER 38034670 II ER 38034682 II ER 4.15 & 4.16 60 KVA transformer 750V/415V,3phase,4 wire,vector configurationstar-star 9 KVA 750V/415/190V, 3-phase starstar-star,dry transformer air cooled power distribiution transformer- for train lighting load Roof Mouted AC package unit for 4.41 LHB Railway power car 5.13 LOCKING PLATE 5.13 axle cap screw 1in for box-n 5.13 backing ring f/CTRB cl-E(6x11) 5.13 spacer for CTRB E class (6x11) RDSO/PE/SPEC/AC/061(REV0)WITH AMENDMENT3(TYPE-11) AND RDSO LETTER No. EL/7.2.2/MOTOR DATED 12.09.2011 NIL R.D.S.O'S DRG. NO.WD- 87019 /S 1 ALT. NO. - 1 OR LATEST NEI DRG. NO. PESD-6085 (NARROW),PART NO-7,REV-'B',ALT. NO.-'B' OR LATEST/SIMILAR. NEI PART DRG.NO.PE/E-1115 NBC AND RDSO'S STR.NO.AB/RB-392002, (REV-3) WITH AMENDMENT NO.2 OF NOVEMBER 2008 OR LATEST. NEI Part Drg No-PE/HM-129848 X A and RDSO's STR No-AB/RB/-392002,REV-2 of Aug 2004 with Amendment No-1 of July 2005 or latest. OR Spacer for CTRB 6 X11" Class 'E' to TIMKEN Drg No-B-35372 and RDSO's STR no-AB/RB-392002,REV-2 of Aug 2004 with Amendment No-1 of July 2005 or latest. RDSO'S schedule of technical requirement no. AB/RB-39-2002 (REV.-3) of December 2006 with latest amendment. 5.13 CTRB complete assembly ( boxn) 5.13 grease seal for CTRB 5.01 OUTER SPRING FOR H.S. BOGIE 5.01 SNUBBER SPRING H S BOGIE 5.01 INNER SPRG FOR H.S. BOGLE R.D.S.O'S SPECN. NO. WD50-MISC-2007 OF OCTOBER 2007 OR LATEST R.D.S.O'S SPECN NO-WD-01HLS-94(REV-3) OF JANUARY '2009 or LATEST. RDSO'S SPECN. NO. WD-01HLS-94(REV.-3) OF JAN.-2009 OR LATEST. RDSO'S SPECN. NO. WD-01HLS-94(REV.-3) OF JAN.-2009 OR LATEST. 5.09 disc wheel for box-n 5.09 axle for box n wagon 5.13 side frame key for boxn 5.01 bolster spring outer boxn 5.01 BOLSTER SPRING INNER 5.01 snubber spring boxn 5.01 spring plank for boxn 5.01 wedge block for boxn 38037350 II ER 38037452 II ER 38040177 II ER 38040189 II ER 38040190 II ER 38064510 II 38064522 II ER ER 38106097 II ER 38106127 II ER R.D.S.O'S DRG. NO. WD-83069-S/1, ITEM NO. -2 ALT. NO.- 14 (FOURTEEN)OR LATEST. 38106139 II ER R.D.S.O'S DRG. NO. WD--83069--S/1 ITEM NO.--3, ALT. NO.--14 (FORTEEN) OR LATEST 38106140 II ER 38106152 II ER 38106164 II ER R.D.S.O'S DRG NO-WD-92058S/5,ITEM NO-1,ALT NO-11(ELEVEN) OR LATEST RDSO'S DGR. NO- WD-92058-S/5, ALT. NO- 11 (eleven) OR LATEST RDSO'S DRG. NO. WD-92058S/5,ITEM NO.-2,ALT NO.12(TWELVE) OR LATEST W/WL-4764/R/WAP/SK/M-153 alt latest W/WL-4901/R R.D.S.O'S SK.--69594, ITEM NO.--6, ALT. NO.--34(THIRTY FOUR) OR LATEST. SPECN. IS:3195-92 WITH AMENDMENT NO. 2 OF SEPTEMBER 2000 GR.-60 Si7 AND R.D.S.O'S SPEC. NO. WD-01-HLS -94 (REV-3) OF RDSO'S DRG. NO. WD-83069-S/1, JAN. 2009. ITEM NO. 1, ALT. NO.14(fourteen) SPECIFICATION IS: 3195-92 WITH AMENDMENT NO.-2 OF SEPTEMBER - 2000- GR - 60 Si7 AND R.D.S.O'S SPECN. NO. WD.-01 -HLS -94(REV-3) OF JAN. 2009 OR LATEST. SPECN: 3195 GR. 60 Si7 AND R.D.S.O'S SPECN. NO. WD-01-HLS-94(REV.3) OF JANUARY 2009 OR LATEST. RDSO's SK - 69594. Item No: 1, Alt. No: 34(THIRTY FOUR) OR LATEST. RDSO'S SK - 77579, ITEM NO. 1(One), ALT. NO. 7(Seven) OR LATEST. 5.01 adapter retainer bolt+lock nut 5.01 bogie centre pivot pin /Boxn 5.01 cast steel bolster modified CAST STEEL BOLTSTER FOR 5.01 CASNUB-22 NLB BOGIE 5.01 Side bearer Pad (Metal Bonded) 5.01 MODIFIED ELASTO MERIC PAD BOGIE CENTRE PIVOT BOTTOM 5.01 MK-2 5.01 BOGIE CENTRE PIVOT TOP 5.01 bogie centre pivot bolt comp. 5.01 liner bolster for boxn 5.01 liner side frame friction boxn 5.01 narrow jaw adapter 22w (hs) 5.01 wide jaw adopter 22W SK-78527 5.01 modified adopter 22wm casnub RDSO'S SK. - 69594 ITEM NO.- 8, ALT. NO. - 34(THIRTY FOUR) OR LATEST. IRS'S DRG. NO. W/BE- 613, ALT NO.NIL OR LATEST. R.D.S.O'S DRG. NO. WD - 92058 S/3 ALT. NO.- 7 (SEVEN) OR LATEST. R.D.S.O DRG NO WD - 89067-S/4, ALT-12 (TWELVE) OR LATEST. RDSO'S DRG. NO.WD-85076S/1,ALT.NO.-10(TEN).OR LATEST.AND RDSO'S STR. NO.03MISC-86(REV-4). RDSO'S DRG. NO.WD-95005/S1,ALT. NO. 6(SIX) OR LATEST AND RDSO'S SPECN. NO.WD-20-MISC95(REV-3) WITH AMENDMENT SLIP NO.4 OF MAY 2006 OR LATEST. R.D.S.O'S DRG. NO. WD-85079 -S/2, ITEM NO.- 1, ALT. NO.- 23 (TWENTY THREE) OR LATEST. RDSO'S DRG. NO. WD-85079-S/2, ITEM NO.2, ALT. NO. 23(twenty three) OR LATEST. R.D.S.O'S DRG. NO. WD- 85079-S/2, ITEM NO. 4,5,7,& 8. ALT. NO.- 23 (TWENTY THREE) OR LATEST. 70% OF 215MM. LONG & 30% OF 239MM. LONG FOR CENTRE PIVOT PIN. R.D.S.O'S SK.- 77578, ITEM NO.2(TWO), ALT. NO.-5(FIVE) OR LATEST. R.D.S.O'S SK. 69594 ITEM NO.7(SEVEN), ALT. NO.34 (THERTY FOUR) OR LATEST. R.D.S.O'S DRG. NO. WD- 89067 -S/9 ALT. NO. - 6(SIX) OR LATEST. R.D.S.O'S SK.--78527, ALT. NO.-4(FOUR) OR LATEST. RDSO's Drg. No. WD-85053/S-1, Alt. No. 4(four) or latest. 38106218 ER 38106267 ER 38106292 II ER 38106309 II ER 38106310 II ER 38106322 II ER 38106334 II ER 38106346 II ER 38106360 ER 38106371 II ER 38106383 II ER 38106401 II ER 38106425 II ER 38106437 II ER CONSTANT CONTACT POLYURETHANE SUDE BEARER 5.01 PAD ASSE CONSTANT CONTACT POLYURE 5.01 THENE CONSTANT CONTACT POLYURETHANE SIDE BEARER 5.01 PAD 5.06 horizontal lever for boxn 5.06 MAIN PULL ROD(SHOCF). 5.06 MAIN PULL ROD LONG 5.06 hand brake pull rod (boxn) 5.06 empty tie rod for boxn 5.06 loaded tie rod for boxn 5.06 brake gear shaft long for boxn 5.06 connecting rod for brake gear 5.06 coupler rod for boxn 5.06 hand brake screw+nut+washer 5.06 control rod f/ IRSA-600 SAB 5.06 main pull rod w/bush long bcn RDSO'S SPCN NO WD-38MISC-2004 (REV-1) OF JAN,2008 WITH AMENDMENT NO 1 OF MARCH,2008 OR LATEST RDSO'S SPCN NO WD-38MISC-2004 (REV-1) OF JAN,2008 WITH AMENDMENT NO 1 OF MARCH,2008 OR LATEST RDSO'S SPCN NO WD-38MISC-2004 (REV-1) OF JAN,2008 WITH AMENDMENT NO 1 OF MARCH,2008 OR LATEST RDSO's Drg no-AAL-021101/N,ALT NO-One or Latest 38106462 II ER RDSO's DRG NO. AAL-021101,ALT NO-8(EIGHT) OR LATEST. 38106474 II ER 38106486 II ER 38125006 ER 38125018 ER 38125020 ER 38125031 ER 38125122 ER 38125134 ER 38125171 ER 38125183 ER 38125225 ER 38125316 ER 38125328 II ER 38125511 ER RDSO's DRG NO-AAL021101/N,ALT NO-1(ONE) OR LATEST IRS's Drg No- WA / BG - 6335, Alt NoNIL OR LATEST. IRS'S DRG. NO. WA/BG-6354, ALT. NO.-3(THREE) OR LATEST. IRS. DRG. NO. WA/BG-6355, ITEM SL. NO.- 1 (ONE), ALT. NO. -3 (THREE) OR LATEST. IRS'S DRG. NO. WA/BG--6356 SL. NO.-1(ONE), ALT. NO.--1(ONE) OR LATEST. IRS's Drg No- WA / BG - 6338, Alt No1(ONE) OR LATEST IRS's Drg No- WA / BG - 6342, Alt No Nil OR LATEST. IRS's Drg No- W / BG - 6341, Alt No. NILOR LATEST. R.D.S.O'S DRG. NO. WD-80007-S-19 ,ITEM NO.-2, ALT NO.-15(FIFTEEN) OR LATEST. R.D.S.O'S DRG. NO. WD- 00046-S01, ITEM NO. 1, ALT. NO.-1(ONE) OR LATEST. IRS'S DRG. NO. WA/BG- 6339, ALT. NO.- NIL OR LATEST R.D.S.O'S DRG.NO. WD--82064-S-10RC, ITEM NO.-2, ALT. NO.12(TWELVE) OR LATEST. IRS Drg No - WA / BG - 6355 Sl.no.3(three), Alt No - 3 ( Three ) OR LATEST. IRS's Drg No- WA / BG- 6354, Alt No3(THREE) OR LATEST. IRS's Drg No- W/BG - 6348, Alt No- 1 or latest. 5.06 main pull rod w/bush short bcn 5.06 bracket emptyload ch-over long I.R.S'S DRG. NO. W/BG--6349,ALT. NO.--2 (Two) OR LATEST. R.D.S.O'S DRG. NO. WD-00046-S01, ITEM NO.-4, ALT. NO.- 1 (ONE) OR LATEST. R.D.S.O'S DRG. NO. WD-84014-S-6 ITEM NO.-4, ALT NO.-9 (NINE) OR LATEST. 5.06 "bracket,emptyload ch-over (S) 5.03 bearing piece comp.for coupler 5.06 Hand Brake Pull Rod (BCN) 5.03 lock for all aar cbc RDSO's STR No- 48-BD-08 of RDSO's SK-62724, Item No- 4, Alt Nomay 2008 or LATEST 23(TWENTY THREE) OR LATEST, RDSO'S DRG. NO-WD-92081-S56,ITEM NO-5a & 5b,ALT NO-5(FIVE) OR LATEST R.D.S.O'S SK.-62724, ITEM NO.-8, R.D.S.O'S STR. NO. 48-BD-08 ALT. NO.-23 (TWENTY THREE) OR OF MAY. 2008 OR LATEST. LATEST 5.03 toggle for all cbc RDSO's STR No 48-BD-08 of may 2008 or latest. 5.03 kunckle pivot pin with washer CYLINDER ROD CLEVIS ASSLY 5.12 TO 5.03 universal lock lift connector 5.03 lock lift leverhook for CBC 5.03 KNUCKLE 5.03 yoke pin support 5.03 coupler body ht n/t cbc 5.03 yoke box n 5.03 draft gear arrangement Boxn RDSO's SK - 62724, Item No- 5(Five), Alt No- 23(Twenty three) or latest RDSO's STR. No- 48-BD-08 of RDSO's SK- 62724, Item No- 6 (Six), MAY 2008 OR LATEST. Alt No- 23 (Twenty three) OR LATEST R.D.S.O.'S SK.- 62724, ITEM NO. R.D.S.O.'S STR NO.48-BD-08 7(SEVEN), ALT. NO. -23(TWENTY OF MAY 2008 OR LATEST. THREE) OR LATEST R.D.S.O'S SK.--62724, ITEM NO.--2, R.D.S.O'S STR.NO.48-BD-08 ALT. NO.--23 (TWENTY THREE) OR OF MAY 2008 OR LATEST. LATEST RDSO's STR No- 48-BD-08 of IRS's Drg No. WA/BD-4462, Alt No.- 5 May, 2008 or Latest (five) or Latest RDSO's STR No- 48-BD-08 of RDSO's SK-62724, Item No-1, Alt NoMay 2008 or latest. 23 (Twenty three) R.D.SO'S SK.62724, ITEM NO.-3, R.D.S.O'S STR NO. 48-BD-08 ALT. NO.-23 (TWENTY THREE) OR OF MAY. 2008 OR LATEST. LATEST R.D.SO'S SK.62724, ITEM NO.-3, R.D.S.O'S STR NO. 48-BD-08 ALT. NO.-23 (TWENTY THREE) OR OF MAY. 2008 OR LATEST. LATEST 38125523 ER 38125651 ER 38125663 ER 38125717 ER 38125791 ER 38130350 II ER 38130361 ER 38134093 II ER 38134111 II ER 38134123 II ER 38134135 II ER 38134305 II ER 38134688 II ER 38135840 II ER 38135851 II ER 38135863 II ER POH kit No1 for RF-361 high 5.04 capacity draft gear. POH KIT MARK 50 HIGH 5.04 CAPACITY DRAFT GEAR POH kit NO2 of RF-361 high 5.04 capacity draft gear POH KIT MARK 50 HIGH 5.04 CAPACITY DRAFT GEAR RDSO's STR NO. 55-BD-90 WITH AMENDMENT NO.3 OF RDSO's DRG. NO.WD-90076SEPT.93 OR LATEST S/01,ALT.NO-01 OR LATEST RDSO's DRG. NO.WD-90076S/01,ALT.NO-01 OR LATEST RDSO's DRG. NO.WD-90076S/01,ALT.NO-01 OR LATEST RDSO's DRG. NO.WD-90076S/01,ALT.NO-01 OR LATEST 38135875 II ER 38135887 II ER 38135899 II ER 38135905 II ER 5.03 striker casting for boxn 38136132 II ER 5.03 38136156 ER 38136168 II ER 38136181 II ER 38137604 II ER 38140184 II 38140329 II ER ER 38140330 ER 38140949 ER 38145110 I ER 38145900 II ER 38146605 ER 38146629 ER 38146630 ER 5.03 5.03 5.03 5.06 5.06 5.12 5.06 5.06 5.06 5.06 5.01 5.01 RDSO's SPECN. NO. 48-BD- IRS's Drg No.WA / BD-4460,Alt No08 OF MAY 2008 OR LATEST. 7(Seven) OR LATEST RDSO's Drg No- WD 80007-S-14, Item No- 6, Alt No-21(Twentyone) or yoke support plate for box-n latest. RDSO's STR No- 48-BD-08 of RDSO's Drg No WD-87056-S/1, Alt STRIKER CASTING WEAR PLATE May' 2008 OR LATEST. No 4 ( Four ) OR LATEST RDSO's STR No. 48-BD-08 of RDSO's SK-62724, Item No-10(ten), shank wear plate for aar cbc May 2008 or latest. Alt No-23(Twenty Three)or latest R.D.S.O'S SK.- 62724, ITEM NO.-9, R.D.S.O'S STR. NO. 48-BD-08 ALT. NO.-23(TWENTY THREE) OR knuckle thrower for cbc couple OF MAY 2008 OR LATEST LATEST AND RDSO's Drg No- WD-82064-S-05-RC, Item No-2, Alt No- 7(SEVEN) or sab o/h kit9 (controlRod) boxn Latest. Kit Stud & End Piece f/Br.Beam IRS'S DRG. NO, W/DW-199 ALT.NO.WORM WHEEL BG. 3(THREE) OR LATEST. I.R.S.DRG.No.W/BG - 6150. Alt. No. BRAKE SHOE KEY 2 (two).OR LATEST. R.D.S.O's Drg.No.WD - 84074 - S 01 - RC ,Item.No. 1 To 26, Alt.No.load device empty for sab 3(THREE).OR LATEST. R.D.S.O'S Specn.No. WD - 13 ABR - 2006 With Amendment R.D.S.O'S Drg.No. WD - 99062 - S brake block composite L type No. -1 Of May 2007 OR Latest. - 01 Alt.No.- 3 (THREE)Or Latest R.D.S.O'S Drg.No. Wd-89033 - S/1, Item No.1 To 15.Alt.No.-19 BRAKE BEAM COMPLETE BOX-N (Nineteen)OR LATEST. EQUALISINS LEVER W/BURE BOXRDSO's SK.- 69597, Item. No.N 1,5,6&7 Alt. No.-40(Forty). 0r latest. RDSO'S SK.- 69597. Item No.-2, BOGIE END PULL ROD Alt.No.-40 (Forty).OR LATEST. 5.01 bogie end push rod boxn 5.06 "pin+washer+cotter C&W-4/97,it 5.06 brake beam hanger (casnub22WM) Cast Steel Brake Beam Complete 5.01 With Bush For Casnu 5.06 brake block assembly 5.06 sab regulator irsa-600 BOX 5.06 sab regulator for boxn 5.06 sab repair kit 1 (spring) 5.06 5.06 5.06 5.06 5.06 5.06 5.06 5.06 5.06 RDSO'S SK-69597 ITEM NO. 3 ALT. NO. 40(FORTY).OR LATEST. R.D.S.O'S DRg.NO.WD-94068 -S1,Item NO - 1(One).Alt.No 4(Four)OR LATEST. R.D.S.O's SK- 69597, Item No.-12 & 13, Alt.No.-40 (Forty)Or LATEST. R.D.S.O'S Drg. No. WD- 85084 - S/1. Item No.-1 & 2. Alt.No.- 5 (Five).OR LATEST. R.D.S.O'S Drg.no.WD-88012-S/1. Item.no.3 To 11,Alt.no.-8 (Eight).OR LATEST R.D.S.O'S Drg.No. WD-82064-S-01RC, RDSO's Drg.no. WD--82064 - S- 01 RC, RDSO'S specn.No.07-ABR-92 with Amendment no.-4 of july Kit No.2 For Slack Adjuster Type 2000.or latest as per annexure IRSA-600 Consisti attached. RDSO's Specn.No. 07-ABR-92, wih Amendment No.4 of July 2000 Or Latest Consisting of 5 (Five) Items as per annexure sab repair kit 3(leader nut) attached. R.D.S.O.'S specn.no. 07- ABR92, with AMENDMENT No.-4 sab repair kit 5 (barrel spr.) OF JULY 2000 RDSO's SPECN No.-07-ABR- RDSO's DRG.No. WD-82064-S-RC, Bearing 45 Tall (Complete) for Slack 92 WITH Amendment no.4 of Item no.-7,Alt.No.12(TWELVE) adjuster Type July 2000 OR LATEST. MAT.& SPECN.-IS:2513 & IS:5932 R.D.S.O'S SPECN. NO.07ABR - 92 AMENDMENT NO, sab repair kit 8(adj.spn&tube) 4 OF JULY 2000 OR LATEST R.D.S.O.'S Drg.No.WD-82064-S-05sab o/h kit9 (control rod) BOX RC, RDSO's specn.No.07-ABR92.Amendment No.4 of July sab repair kit 11(adj.tube) 2000 Or latest . RDSO's Specn no-07-ABR-92 Overhauling Kit no.13 for slack with Amendment No-4 of July Adjuster Type IRSA or latest sab repair kit14 (must change) 38146642 ER 38146691 ER 38146757 ER 38146769 II ER 38146770 ER 38148481 II ER 38149400 II 38149515 II ER ER 38149527 II ER 38149539 II ER 38149540 II ER 38149552 II ER 38149564 II ER 38149576 II ER 38149588 II ER 38149590 II 38149606 II ER ER 5.06 5.06 5.06 5.06 5.06 poh Kit (c/p. bkt. 6 item EK) Suspension strap ( Aux. Resv.) metalic kit for QRV (10 items) poh kit(iso/cock IRS) Seal for Common Pipe Brack. EK 38161000 38161011 38161023 38161035 38161047 II II II ER ER ER ER ER 38161059 II ER 38161096 II 38161138 II ER ER 38161151 II 38161175 II ER ER 38161187 II 38161217 II ER ER 38161242 X 38161254 II 38161266 II ER ER ER 38161278 II ER 5.06 32 mm brake pipe -1 RDSO'S Specn.no.04-ABR-02 with amendment slip no.6(six) RDSO's drg.no- WD-80007-S-11, Alt. of April 2010 or latest. no-7. or latest. 38163240 II ER 5.06 32 mm brake pipe -3 RDSO'S Specn.no.04-ABR-02 with amendment slip no.6(six) RDSO's drg.no- WD-80007-S-11, Alt. of April 2010 or latest. no-7. or latest. 38163251 II ER RDSO's drg.no- WD-80007-S-11, Alt. no-7. or latest. 38163263 II ER RDSO'S drg.no. WD-80007-S-11, alt.no.-7(seven) or latest 38163317 II ER 38163329 II ER 38163378 II ER 5.06 RUBBER KIT FOR COMMON PIPE. SPARES FOR MAIN VALVE 5.06 ASSEMBLY 5.06 poh kit (RelayValve Coach DV) NON INTERCHANGABLE 5.06 METALLIC PARTS. 5.06 pressure Rod for EK DV POH KIT FOR COMMON PIPE 5.06 BRACKE 5.06 REPAIR KIT KE DESINGN SPARES FOR PIN SLEEVE 5.06 ASSEMBLY 5.06 ISOLATING COCK 5.06 poh kit(iso/cock SIL) SPARES R.CHARGER HANDLE 5.06 ASSLY. 5.06 32 mm brake pipe -2 5.06 20mm pipe for dv to ar 5.06 stainless steel pipe 5.06 guard's emergency brake valve RDSO'S Specn.no.04-ABR-02 with amendment slip no.6(six) of April 2010 or latest. RDSO'S SPECN. NO. 04-ABR02 of April 2003 with amendment no.6(Six)of April 2010 or latest. RDSO'S SPECN. NO. 04-ABR02 of April 2003 with amendment no.6(Six)of April 2010 or latest. RDSO'S drg.no. WD-80007-S-11, alt.no.-7(seven) or latest RD SO'S SK.- 73549 ALT. NO.5(FIVE) OR LATEST. II 5.06 cut off angle cock (ball type) RDSO's Specn.No.02-ABR-02 of OCT. '03 with amendment No.3(three) of April.-2010 or RDSO's Drg.No.WD-92051-S-06,Item latest. No.-1 to 17,Alt.No.-5(Five) or latest. RDSO'S DRG. NO-WD-92081-S-54 ALT. NO-1(ONE) OR LATEST. RDSO's Drg.No. WD-88123/S01,Alt.No.2(Two) or latest and RDSO's Drg.No.WD-88123/S02,Alt.No.6(six) or latest. 5.06 "air bk.cyl.12"" complete for R.D.S.O'S DRG. NO. WD-92051-S11, ALT.NO.-3 (THREE) OR LATEST. 5.06 air brake cylinder 355mm compl 5.06 air cylinder with jam nut 5.06 DISTRIBUTOR VALVE 5.06 qrv kits conisting of 13 items 5.06 pin assy.comp. (7 items) Bottom cover complete for 5.06 ESCORT's distributor val 5.06 r/charger comp. modified ek dv PISTON LINING TO SABWABCO 5.06 INDIA LTD. PART No.-6067 5.06 5.06 5.06 5.06 3.01 5.06 5.06 5.06 RDSO's Specn.No. 02-ABR02,appendix-A1 of Oct.-03 with amendment No.03 of April2010 OR LATEST AND RDSO'O SPECN. NO.02ABR-02 WITH AMENDMENT NO.3.OF APRIL.2010 OR RDSO'S DRG.NO.WD-92051-Spoh kit (br/cyl 355mm IRS) LATEST. 10,ALT.1 (ONE) OR LATEST, OVERHAULING KIT FOR CUT OFF RDSO'S drg.no.WD-88123-S-02 item A no.-7,Alt. no.-6(six) or latest, RDSO's Drg.no.WD-92051-Spoh kit(dirt collector irs-EK) 05(sheet-2), RDSO's SK-73547,Item No.4,Alt NoGasketfor AB hose coupling 12(Twelve) or latest. RDSO's DRG. NO. WD-81027-S-01 AIR BRAKE HOSE COUPLING ITEM NO. 1 TO 7,ALT. NO.COMPLE 10(TEN).OR LATEST. RDSO'S SK-73547 Item no.-1 to air hose coupling (brake pipe) 7.Alt.no.-12(Twelve) or latest. RDSO'S Specn.no. 02-ABR-02 with amendment no.-3 of April RDSO'S Drg. no. WD9-7951-S/10,Alt. Pipe Bkt with contrl.reservoir 2010 or latest. no.-3(three) or latest RDSO'S DRG. NO. WD-83062-S-07, ITEM NO-1, ALT NO-5 (FIVE) Or gasket for 32 mm pipe flange latest. 38163421 II ER 38163445 ER 38163585 II ER 38163615 II ER 38163822 II 38163834 II 38163846 II ER ER ER 38163860 II 38163871 II ER ER 38164206 II ER 38164218 II ER 38164255 II ER 38164279 II ER 38164413 II ER 38164670 II ER 38164681 II ER 38164693 II ER 38164723 II ER RDSO'S DRG.NO.WD-83062-S-07, ITEM NO.-1,ALT.NO.-5(Five) OR LATEST. 3.01 gasket for 20 mm pipe flange 5.06 5.06 5.06 5.06 5.06 DIRT COLLECTOR poh kit (DV EK) poh kit (DV C3W) r. charger housing with bushes Bottom Cover Housing sub Assly STUD WITH HEX NUT AND 5.06 SPRING W 5.06 pin flat hd.(t-a)41x89 for bk 5.06 pin flat hd 41x163.5 L/PN-631M ADJUSTABLE LEVER COMP FOR 5.12 DOM 5.12 Operating Shaft Large DOM BOB 5.12 eye bolt+nut+bush 45mm bobr 5.12 eye bolt 39mm for double link 5.12 CONNECTING LINK (SMALL) 5.12 bearing w/bush far side bobr 5.12 bush for dom (double link) 5.12 CONNECTING LINK (LARGE) 5.12 14x20in AirCylinder DOM/ BOBRN RDSO'S Specn.No.02-ABR-02 with amendment no.- 3 of RDSO'S drg, No.WD-92051-SAPRIL.2010 or latest. 03,Alt.No.- 4(Four)or latest IS:3063-1994 TYPE- 'B'. IRS's Drg No- L / PN-613 / M, Alt No3(Three) OR LATEST. IRS'S DRG. NO. L/PN-631/M ITEM NO.-1 TO 5.ALT.NO-6(SIX) OR LATEST. R.D.S.O'S DRG NO-WD-92081-S59,ITEM NO-1 TO 12,ALT NO8(EIGHT) OR LATEST. RDSO'S DRG NO-WD-96038-S04,ITEM NO-9,8 & 10,ALT. NO7(SEVEN) OR LATEST. R.D.S.O'S DRG NO-WD-92081-S57,ITEM NO-2&15,ALT NO-1O(TEN) OR LATEST. RDSO'S DRG. NO-WD-92081-S57,ITEM NO-7 & 17,ALT. NO10(TEN) OR LATEST. RDSO'S DRG NO-WD-92081-S57,ITEM NO-1,ALT NO-TEN OR LATEST WITH BUSH TO RDSO'S DRG NO-WD-92081-S-53,ITEM NO3,ALT NO-2(TWO) OR LATEST. RDSO'S DRG. NO. WD-92081-S57,ALT.NO-10(TEN) OR LATEST. RDSO's Drg No-WD-92081-S-57,item5,Alt No-10 or Latest. RDSO's Drg No-WD-92081-S-52,Item no-5,Alt No-4(Four) or latest. 38164735 II ER 38165168 38165211 38165223 38165260 38165272 ER ER ER ER ER II II II II II 38165302 ER 38320642 ER 38320800 ER 38450150 ER 38450161 ER 38450203 ER 38450306 ER 38450318 ER 38450367 ER 38456072 ER 38457167 38457210 ER ER 3.1 3.1 3.1 3.1 3.1 3.1 FULLY MACHINED AXLE BOX REAR COVER TO ONE NUMBER PER BATCH SHALL BE SUBJECTED TO DESTRUCTIVE TESTING.REPLACEMENT GUARANTEE SHALL BE FOR ONE YEAR FROM THE DATE OF PUTTING THE COACH INTO SERVICE OR TWO YEARS FROM THE DATE OF SUPPLY, WHICHEVER IS EARLIER. TO BE PROCURED FROM ICF APPROVED SOURCES ONLY. BG Coaching Axles FULLY MACHINED AXLE BOX FRONT COVER TOONE NUMBER PER BATCH SHALL BE SUBJECTED TO DESTRUCTIVE TESTING. REPLACEMENT GUARANTEE SHALL BE FOR ONE YEAR FROM THE DATE OF PUTTING THE COACH INTO SERVICE OR TWO YEARS FROM THE DATE OF SUPPLY, WHICHEVER IS EARLIER.TO BE PROCURED FROM ICF APPROVED SOURCES ONLY. BOLT FOR AXLE BOX /10.TO BE PROCURED FROM ICF APPROVED SOURCES ONLY. SUPPLY AND INSTALLATION OF AIR BRAKE EQUIPMENT FOR WLRRM COACHES WITH BOGIEMOUNTED BRAKE CYLINDER (BMBC) TO SUPPLY & INSTALLATION OF AIR BRAKE EQUIPMENTS FOR DMU/DTC & ARMV COACHESWITH 200 LITRES RESERVOIR & BOGIE MOUNTED BRAKE CYLINDER TO SCHEMATIC AND TO SPECN. IRS, R-16-95 WITH CORRIGENDUM 1 & 2 DRG.NO.T-0-2-603/ITEM-2,ALT `C' 30020451 III ICF Drg. No. RDSO SK CG K-6015 alt 1 30020645 III ICF DRG NO.T-0-2-633/ITEM.1 ALT `q' 30020750 III ICF T-0-2-608/5 ALT. `q' 30020797 III ICF 30357937 II ICF 30358152 II ICF MATERIAL SCHEDULE NO.ICF/SK 10-2-513 ISSUESTATUS:01 (REV.00). SCHEDULE NO. ICF/SK 10-2309 (REV-01). DRG.NO. DMU/DTC3/BMB-3-5-301 3.1 3.1 3.1 3.1 3.1 3.1 SUPPLY AND INSTALLATION OF AIR BRAKE EQUIPMENT (INCLUDING PAS) FOR AC SELFGENERATION COACHES TO SUPPLY AND INSTALLATION OF AIR BRAKE EQUIPMENTS (INCLUDING PAS) FOR NONACCOACHES (SDC & WCB) TO SUPPLY & INSTALLATION OF AIR BRAKE EQUIPMENT FOR DETC (ON BOARD) COACHESWITHOUT EXHAUSTER TO SCHEMATIC WITH 200 LTS RESERVOIRAND TO SUPPLY AND INSTALLATION OF AIR BRAKE EQUIPMENT (INCLUDING PAS) FOR SLR2COACHES TO SUPPLY AND INSTALLATION OF AIR BRAKE EQUIPMENT WITH 200 LITRES RESERVOIRFOR SRJS COACHES WITH BOGIE MOUNTED BRAKE CYLINDER TO SUPPLY AND INSTALLATION OF AIR BRAKE EQUIPMENT INCLUDING PAS AND PNEUMATIC EQUIPMENT FOR CONTROLLED DISCHARGE TOILET SYSTEM (CDTS) FOR NON-AC COACHES (GS & SCN) TO RESPECTIVELY.THE FIRM SHALL QUOTE FOR AIR BRAKE EQUIPMENT AND PNEUMATIC EQUIPMENT FOR CDTS SEPERATELY. MATERIAL SCHEDULE NO.ICF/SK10-2-308 REV.05.WITHCORRECTION SLIP-01. 30358292 II ICF MATERIAL SCHEDULE NO.ICF/SK-10-2-303 REV04.WITH C.SNO.01. 30358309 II ICF 30358322 II ICF MATERIAL SCHEDULE NO. ICF/SK-10-2-398 REV02.WITH C.S.NO.01. 30358360 II ICF SCHEDULE NO.ICF/SK-10-2398A REV NO.00 WITH C.S. NO.4. 30358413 II ICF MATERIAL SCHEDULE NO.ICF/SK-10-2-441 (REV.02) AND ICF/SK-10-2-514 (REV.01) 30358425 II ICF SCHEDULE NO.ICF/SK-10-2321 (REV.02).C.S.04. DRG. NO. DETC-3-5-013 3.1 3.1 3.1 3.1 3.1 SUPPLY AND INSTALLATION OF AIR BRAKE EQUIPMENTS INCLUDING PAS AND INSTALLATION OF SS PIPES AND DOUBLE FERRULE FITTINGS SUPPLIED BY ICF FOR GS & SCN COACHES AS PER EXCEPT MATERIAL SCHEDULE ITEMS AT SL.NO.4 ITEM UNDER NO.ICF/SK-10-2-503 ISSUE SL.NO.2.1 SHALL BE 1 NO. PER STATUS:01 REV-01 WITH COACH. C.S.01 SUPPLY,INSTALLATION AND COMMISSIONING OF AIR BRAKE EQUIPMENT INCLUDING PAS AND INSTALLATION OF SS TUBES AND DOUBLE FERRULE FITTINGS SUPPLIED BY ICF FOR AC(WGSCWAC,WGFAC,WGFSCW AC AND WGSCZAC)AND NON AC (GS,SDC,SCN,WGB AND SLR) COACHES SUPPLY AND INSTALLATION OF AIR BRAKE EQUIPMENTS INCLUDING PAS AND INSTALLATION OF SS PIPES & DOUBLE FERRULE FITTINGS SUPPLIED BY ICF FOR SLR COACHES AS PER ITEM UNDER SL.NO.2.1 SHALL BE 1 NO. PER COACH. SUPPLY & INSTALLATION OF AIR BRAKE EQUIPMENTS INCLUDING PARKING BRAKESTAINLESS STEEL PIPES & STAINLESS STEEL FITTINGS FOR JDCC COACHES TOSCHEMATIC AND SUPPLY AND INSTALLATION OF AIR BRAKE EQUIPMENT WITH PASSENGER EMERGENCY ALARM SYSTEM FOR MILITARY KITCHEN CAR 30358498 II ICF AS PER MATERIAL SCHEDULE NO.ICF/SK-10-2503 ISSUE STATUS:01,REV.03-CS-01 & 02. 30358516 II ICF MATERIAL SCHEDULE NO.ICF/SK-10-2-503 ISSUE STATUS 01 REV-01. WITH C.S.01 30358541 II ICF 30358607 II ICF 30358619 II ICF MATERIAL SCHEDULE NO.ICF/SK-10-2-494ISSUE STATUS.01. REV.NO.00. TO MAT.SCHEDULE NO.ICF/SK-10-2-495 ISSUE STATUS 01,REV-00.WITH C.S.NO.01. DRG.NO.JDCC-3-5-003 3.1 3.1 3.1 3.1 SUPPLY, INSTALLATION AND COMMISSIONING OF AIR BRAKE EQUIPMENT INCLUDING INSTALLATION OF PARKING BRAKE AND STAINLESS STEEL TUBES AND DOUBLE FERRULE FITTINGS SUPPLIED BY ICF FOR SV/DPC COACHES TO BE PROCURED FROM RDSO APPROVED SOURCES ONLY. SUPPLY,INSTALLATION AND COMMISSIONING OF AIR BRAKE EQUIPMENT INCLUDING INSTALLATION OF STAINLESS STEEL TUBES AND DOUBLE FERRULE FITTINGS SUPPLIED BY ICF FOR ARTV COACHES TO AND TO BE PROCURED FROM RDSO APPROVED SOURCES ONLY. SUPPLY, INSTALLATION AND COMMISSIONING OF AIR BRAKE EQUIPMENT INCLUDING INSTALLATION OF STAINLESS STEEL TUBES AND DOUBLE FERRULE FITTINGS SUPPLIED BY ICF FOR ARMVAC COACHES TO BE PROCURED FROM RDSO APPROVED SOURCES ONLY. SUPPLY AND INSTALLATION OF AIR BRAKE EQUIPMENT INCLUDING PAS AND PNEUMATIC EQUIPMENT FOR CONTROLLED DISCHARGE TOILET SYSTEM (CDTS) FOR AC SELF GENERATION COACHES TO RESPECTIVELY. THE FIRM SHALL QUOTE FOR AIR BRAKE EQUIPMENT AND PNEUMATIC EQUIPMENT FOR CDTS SEPARATELY. TO SCHEMATIC DRG.NO.SV/DPC-3-5-001 ALT 'a' AND MATERIAL SCHEDULE NO.ICF/SK-10-2499 ISSUE STATUS 01, REV.02 & CS.01. 30358620 II ICF MATERIAL SCHEDULE NO.ICF/SK-10-2-500 ISSUE STATUS 01, REV.02 WITH CS.01. SCHEMATIC DRG.NO.ARTV3-3-5301, ALT 'a' 30358632 II ICF MATERIAL SCHEDULE NO.ICF/SK-10-2-501 ISSUE STATUS 01, REV-01. WITH CS.01 TO SCHEMATIC DRG.NO.30935001 30358668 II ICF 30358681 II ICF MATERIAL SCHEDULE NO.ICF/SK-10-2-308 (REV.05) AND ICF/SK-10-2-514 (REV.01) 3.1 SUPPLY AND INSTALLATION OF AIR BRAKE EQUIPMENT INCLUDING PAS AND PNEUMATIC EQUIPMENT FOR CONTROLLED DISCHARGE TOILET SYSTEM (CDTS) FOR SLR2 COACHES TO X RESPECTIVELY. THE FIRM SHALL QUOTE FOR AIR BRAKE EQUIPMENT AND PNEUMATIC EQUIPMENT FOR CDTS SEPERATELY. MATERIAL SCHEDULE NO.ICF/SK-10-2-441 (REV.02) AND ICF/SK-10-2-514 (REV.01) 30358693 II ICF 3.1 SUPPLY AND INSTALLATION OF AIR BRAKE EQUIPMENT INCLUDING PAS AND PNEUMATIC EQUIPMENT FOR CONTROLLED DISCHARGE TOILET SYSTEM(CDTS) FOR NON-AC COACHES (SDC & WCB) . TO MATERIAL SCHEDULE NO.ICF/SK-10-2-303 (REV.04) AND ICF/SK-10-2-514 (REV.01) 30358700 II ICF 3.1 SUPPLY AND INSTALLATION OF AIR BRAKE EQUIPMENT INCLUDING PAS AND PNEUMATIC EQUIPMENT FOR CONTROLLED DISCHARGE TOILET SYSTEM (CDTS) FOR SLR2 COACHES TO X RESPECTIVELY. THE FIRM SHALL QUOTE FOR AIR BRAKE EQUIPMENT AND PNEUMATIC EQUIPMENT FOR CDTS SEPERATELY. 30358711 II ICF 3.1 EMU Motor Coach Axles 31020264 III ICF 3.1 EMU Axles for Trailor Coaches 31027090 III ICF 3.1 GEAR WHEEL FOR HAND BRAKE. 31340209 III ICF IRS-R-43-92 SPECN. IRS, R-16-95 WITH CORRIGENDUM 1 & 2 ICF/SK 10-2-398 (REV 02) AND ICF/SK 10-2-514 (REV .01) RESPECTIVELY Drg. No.AC/DC-EMU/B-02-002 Alt. e/4 item 1 (WAP's Drg. No. WAP-A087) Drg. No. AC/DC/EMU/D2-0-2-204 alt. f DRG.NO.EMU-3-4-030, COLIV,ALT`p' 3.1 3.1 3.1 3.1 SUPPLY OF PARKING BRAKE EQUIPMENT FOR AC/EMU, MEMU, AND HHP/DMU/DPC(WITH EPBRAKE) CONFORMING TOWITH CORRECTION SLIP NO.01.TO BE PROCURED FROM ICF APPROVED SOURCES ONLY. SUPPLY AND INSTALLATION OF AIR BRAKE EQUIPMENTS FOR DMU/TC COACHES WITHBOGIE MOUNTED BRAKE CYLINDER . SUPPLY & INSTALLATION OF AIR BRAKE EQUIPMENT FOR DHMU/DPC & ARTVCOACHES. TOWITH 200 LITRES RESERVOIR. EP BRAKE EQUIPMENT FOR ACDC/EMU/MOTOR COACHES WITH AIR SPRING SUSPENSIONSUITABLE FOR REGENERATIVE BRAKE BLENDING. RDSO SPECIFICATION CK408 REV.00 AND MATERIAL SCHEDULENO.ICF/SK-10-2229 (REV.04) SCHEMATIC DRG NO. DMU/TC-35-001, SCHEDULE NO.ICF/SK 10-2-310. REV NO.01 31354634 III ICF 31356310 II ICF SCHEDULE NO ICF/SK-10-2306 (REV-01).WITH C.S.I SCHEMATIC DRG. NO. DT.25.4.03 DMU/DPC3/35-315 31356916 II ICF MATERIAL SCHEDULE NO.ICF/SK-10-2-326 (REV-02) WITHCORRECTION SLIP NO.5. DRG.NO.AC/DC/EMU/M2-3-5-207 31356953 III ICF 3.1 SUPPLY OF TWIN TOWER HEATLESS REGENERATIVE TYPE AIR DRYER TO AS PER RDSO APPROVED MODEL NO,ORIFICE SIZE AND QAP. THE FIRM SHALL SUBMIT A COPY OF THE APPROVAL LETTER OF RDSO MENTIONING THE APPROVED MODEL NO.ORIFICE SIZE AND QAP. THE INTER CONNECTING PIPES OF THE SPECIFICATION MENTIONED ABOVE SHALL BE IN THE SCOPE OF ICF.THE ITEM SHOULD BE PROCURED ONLY FROM RDSO APPROVED SOURCES. *THE FLANGE CONNECTION OF INLET AND OUTLET PIPES SHOULD BE 1 1/4 BSP AS PER RDSO FIRM SHALL INCLUDE THE FOLLOWING ,SUITABLY BY EMBOSSING /ENGRAVING ON THE NAME PLATE 1) MODEL NO-2)ORIFICE SIZE 3)COACH APPLICATION :HHP-DMU. 3.1 SUPPLY OF TWIN TOWER HEATLESS REGENERATIVE TYPE AIR DRYER TO RDSO/SPECN.NO.MP.0.01.00.06 (REV.05) MARCH 2011 (EMU/MEMU) EXCEPT CLAUSE NO.7.3 & 7.7 AS PER RDSO APPROVED MODEL NO,ORIFICE SIZE AND QAP.THE INTER CONNECTING PIPES AS PER CLAUSE 4.13 OF THE SPECIFICATION MENTIONED ABOVE SHALL BE IN THE SCOPE OF ICF.THE ITEM SHOULD BE PROCURED ONLY FROM RDSO APPROVED SOURCES. AS PER CLAUSE 4.13RDSO/SPECN.NO.MP.0.0 1.00.06 (REV.05) MARCH 2011 (HHP-DMU) EXCEPT CLAUSE NO.7.3 AND 7.7 DRG NO-SK DP 3566(ANNEXURE4 OF THE GOVERNING SPECIFICATION ) 31357179 I ICF 31357209 I ICF 3.1 3.1 3.1 SUPPLY, INSTALLATION AND COMISSIONING OF EP BRAKE EQUIPMENT INCLUDING INSTALLATION OF PARKING BRAKE, AIR DRYER, CONTROL EQUIPMENT FOR AIR SPRING SUSPENSION, AND STAINLESS STEEL TUBES AND DOUBLE FERRULE FITTINGS SUPPLIED BY ICF FOR HHP DMU-DPC COACHES TO AND TO BE PROCURED FROM RDSO/ICF APPROVED SOURCES ONLY. SUPPLY, INSTALLATION AND COMMISSIONING OF E.P.BRAKE EQUIPMENT INCLUDING INSTALLATION OF CONTROL EQUIPMENT FOR AIR SPRING SUSPENSION AND STAINLESS STEEL TUBES AND DOUBLE FERRULE FITTINGS FOR HHP DMU-TC COACHES TO AND TO BE PROCURED FROM RDSO/ICF APPROVED SOURCES ONLY. SUPPLY, INSTALLATION AND COMMISSIONING OF EP BRAKE EQUIPMENT INCLUDING INSTALLATION OF CONTROL EQUIPMENT FOR AIR SPRING SUSPENSION,AND STAINLESS STEEL TUBES AND DOUBLE FERULE FITTINGS FOR AC/EMUTRAILER COACHES TO SCHEMATIC AND TO BE PROCURED FROM RDSO/ICF APPROVED SOURCES ONLY. MATERIAL SCHEDULE NO.ICF/SK-10-2-420 ISSUE STATUS -01, REV.02 AND CS.01. SCHEMATIC DRG NO.DMU/DPC 7-35-701 ALT 'j' AND DMU/DPC/SS-3-5001 31357258 III ICF MATERIAL SCHEDULE NO.ICF/SK-10-2-421 ISSUE SCHEMATIC DRG.NO.DMU/TC4-3-5STATUS -01. REV.03 & CS.01. 403 ALT 'c' 31357260 III ICF MATERIAL SCHEDULE NO.ICF/SK-10-2-425 ISSUE STATUS.01 REV.03 & CS.01. III ICF DRG.NO.EMU/2D/ASR-3-5-201 ALT 'b' 31357430 3.1 SUPPLY, INSTALLATION AND COMMISSIONING OF E.P.BRAKE EQUIPMENT INCLUDING INSTALLATION OF CONTROL EQUIPMENT FOR AIR SPRING SUSPENSION, PARKING BRAKE, AIR DRYER AND STAINLESS STEEL TUBES AND DOUBLE FERRULE FITTINGS SUPPLIED BY ICF FOR AC/EMU/M COACHES TO SCHEMATIC TO BE PROCURED FROM RDSO/ICF APPROVED SOURCES ONLY. SUPPLY AND INSTALLATION OF AIR BRAKE EQUIPMENTS WITH STAINLESS STEEL PIPES,STAINLESS STEEL FITTINGS AND PASSENGER EMERGENCY ALARM SYSTEM FOR FIRSTCLASS AC (WGFAC7) COACHES AND TO SUPPLY AND INSTALLATION OF AIR BRAKE EQIPMENT INCUDING PARKING BRAKE FOR JDCC COACHES TO SCHEMATICAND TO 3.1 SUPPLY & INSTALLATION OF EP BRAKE EQUIPMENT INCLUDING INSTALLATION OF CONTROL EQUIPMENT FOR AIR SPRING SUSPENSION,AIR DRYER, PARKING BRAKE, STAINLESS STEEL TUBES AND DOUBLE FERRULE FITTINGS SUPPLIED BY ICF FOR MRVC/AC/DC/EMU/D/HC COACHES TO SCHEMATIC AND THE FIRM SHALL QUOTE SEPARATELY FOR ITEMS MENTIONED IN NOTE A-8 OF THE ABOVE MAT.SCHEDULE. 3.1 3.1 MATERIAL SCHEDULE NO.ICF/SK/10-2-424 REV.04 ISSUE STATUS-01 & CS.01. DRG.NO.AC/EMU/M/ASR-3-5-011 ALT 'h' MATERIAL SCHEDULE NO.ICF/SK 10-2-493 ISSUESTATUS 01 REV.00. 31357441 III ICF 31357519 II ICF SCHEDULE NO.ICF/SK-10-2496, ISSUE STATUS: 01, REV.NO.01,AMD-01. DRG. NO.JDCC-3-5-003 31357520 II ICF MATERIAL SCHEDULE NO.ICF/SK-10-2-511 ISSUE STATUS:01, REV.01, C.S.NO.01. DRG.NO.ICF/MRVC/D/HC-3-5-001 ALT 'c' 31357532 III ICF 3.1 SUPPLY & INSTALLATION OF EP BRAKE EQUIPMENTS INCLUDING INSTALLATION OF CONTROL EQUIPMENTS FOR AIR SPRING SUSPENSION,AIR DRYER, PARKING BRAKE, STAINLESS STEEL TUBES AND DOUBLE FERRULE FITTINGS SUPPLIED BY ICF FOR MRVC/AC/DC/EMU/D COACHES TO SCHEMATIC AND THE FIRM SHALL QUOTE SEPARATELY FOR ITEMS MENTIONED IN NOTE A-9 OF THE ABOVE MAT.SCHEDULE. MATERIAL SCHEDULE NO.ICF/SK-10-2-510 ISSUE STATUS:01, REV.01 CORRECTION SLIP 02. DRG.NO.ICF/MRVC/D-3-5-001 ALT 'c' 31357544 III ICF 3.1 SUPPLY & INSTALLATION OF EP BRAKE EQUIPMENT INCLUDING INSTALLATION OF CONTROL EQUIPMENT FOR AIR SPRING SUSPENSION, STAINLESS STEEL TUBES AND DOUBLE FERRULE FITTINGS SUPPLIED BY ICF FOR MRVC/AC/DC/EMU/MOTOR COACHES TO SCHEMATICAND THE FIRM SHALL QUOTE SEPARATELY FOR ITEMS MENTIONED IN NOTE A-9 OF THE ABOVE MAT.SCHEDULE. MATERIAL SCHEDULE NO.ICF/SK-10-2-509 ISSUE STATUS:01, REV.01. C.S.NO.2. DRG.NO.ICF/MRVC/M-3-5-001 ALT 'b' 31357556 III ICF 3.1 SUPPLY & INSTALLATION OF EP BRAKE EQUIPMENT INCLUDING INSTALLATION OF CONTROL EQUIPMENT FOR AIR SPRING SUSPENSION, STAINLESS STEEL TUBES AND DOUBLE FERRULE FITTINGS SUPPLIED BY ICF FOR MAT.SCHEDULE NO.ICF/SKMRVC/AC/DC/EMU/C COACHES 10-2-512,ISSUE STATUS:01, DRG.NO.ICF/MRVC/C-3-5-001 ALT TO SCHEMATIC AND REV.01. C.S.NO.01. 'b' 31357568 III ICF 3.1 3.1 3.1 3.1 3.3 3.3 3.3 3.4 3.4 3.4 3.4 SUPPLY & INSTALLATION OF EP BRAKE EQUIPMENTS INCLUDING INSTALLATION OF CONTROL EQUIPMENTS FOR AIR SPRING SUSPENSION, STAINLESS STEEL TUBES AND DOUBLE FERRULE FITTINGS SUPPLIED BY ICF FOR DMU/DTC/JK COACHES TO SCHEMATIC TO STAINLESS STEEL RESERVIOR 9 L CAPACITY AS PERTO BE PROCURED FROM ICF APPROVED SOURCES ONLY. E.P. BRAKE EQUIPMENT FOR AC EMU MOTOR COACHES TOSCHEMATICAS PER BRAKE APPLICATION RELAY TOICF APPROVED SOURCES ONLY BE CONSIDERED. BRAKE CYLINDER FIXING BRACKET BRAKE CYLINDER FIXING BRACKET AND DETAILS BRAKE CYLINDER FIXING BRACKET TO MAT.SCHEDULE NO.ICF/SK- DRG.NO.DMU/DTC/JK-3-5-002 ALT 10-2-519 REV.00. 'a' SCHEDULE NO.ICF/SK 10-2203(REV-2C.S.NO.1. NON ASBESTOS BASED "K" TYPE HIGH FRICTION COMPOSITION BRAKE BLOCKS TO DRG.NOTO .RDSO/SK 98066 ALT.6 & BE PROCURED FROM RDSO RDSO SPECN.NO.C-9809, APPROVED SOURCES ONLY. REV.04. BRAKE HEAD TO(FABRICATEDDESIGN). ICF APPROVED SOURCES ONLY NEED TO QUOTE. CHAIN FOR HAND BRAKE ARRANGEMENT TO BRAKE HEAD - (FABRICATED) TOTO BE PROCURED FROM ICF APPROVED SOURCES ONLY. 31357611 III ICF DRG.NO.ICF/STD 3-5-041 ALT d. 31357684 III ICF DRG.NO.-MEMU/DMC.3-5-009 31396010 III ICF DRG. NO.ICF/SK/7-2-395 ALT.`d'. 31755926 III ICF T-0-3-807 COL I ALT C 30922161 III ICF TO DRG.NO.T-0-3-940,COL.I ALT 'a' 30037104 DRG.NO.GS7-0-3-719, COL.I. ALT 'NIL'. 30037177 III ICF III ICF 30316121 II ICF 30317149 III ICF 30337288 III ICF DRG.NO.EMU/M-3-1-008 COL-I, ALT 'h' 31930517 III ICF DRG.NO.T-3-1-806 COL.III1NO.&COL.IV-1NO,ALT`e'. DRG. NO. ICF/SK-3-3-078 COL.III, ALT.'c'. 3.7 INJECTION MOLDED SILENT BLOCK FOR CENTRE PIVOT FOR BG MAIN LINE COACHES TOANDTO BE PROCURED FROM RDSO APPROVED SOURCES ONLY. SILENT BLOCK FOR CENTER PIVOT TO"QUANTITY SHALL BE1(ONE) EACH INSTED OF 2(TWO) EACH AS PER SILENT BLOCK FOR ANCHOR LINK (INJECTION MOULDED) TO AND TO TO BE PROCURED FROM RDSO APPROVED SOURCES ONLY. ANCHOR LINK BOLTED DESIGN SILENT BLOCK (INJECTION MOULDED)FOR ANCHOR LINK TO AND TO TYPEB OF.RDSO APPROVED SOURCES ONLY NEED TO QUOTE. 3.8 WHEEL FOR HAND BRAKE 3.8 3.8 HAND BRAKE ARRANGEMENT SUPPLY OF STAINLESS STEEL TUBES & DOUBLE FERRULE FITTINGS FOR HHP-DMU/DPC COACHES TO SCHEMATIC SUPPLY OF STAINLESS STEEL PIPES AND DOUBLE FERRULE FITTINGS FORGS,SCN,SDC & WCB COACHES TO 3.8 SUPPLY OF STAINLESS STEEL PIPES AND DOUBLE FERRULE FITTINGS FOR SCN COACHES 3.7 3.7 3.7 3.7 3.8 RDSO SPECN.RDSO/2007/CG- RDSO DRG.NO.CG-K7121 ALT 06 'NIL'. 30060540 II ICF DRG.NO.CG-K6049, ALT. 1. 30067133 II ICF 30070340 31076014 II III ICF ICF II ICF III ICF III ICF 31357453 III ICF 30358553 III ICF 30358565 III ICF RDSO SPECN.RDSO/2006/CG-15 TYPE-A OF RDSO DRG NO-CGK6124,ALT-'3'. DRG.NO.T-0-7-603, COL.I, ALT 'z'. RDSO SPECNRDSO/2006/CG15 RDSO DRG.NO.CG-K6124 ALT '3' 30076134 DRG.NO. MG/TLR 3-4-002/COL.II. ALT.`f' 30344001 DRG.NO.ICF/SK-3-4-062, COL.I, ALT 'a'. 30344025 MATERIAL SCHEDULE NO.ICF/SK/10-2-447 ISSUE STATUS 01, ICF/SK 10-2-507 ISSUE STATUS 01 REV 1 SPECIFICATION ICF/M/D/SPECN-166 ISSUE STATUS-01, REV.03 WITHAMENDMENT-03 AND TO SCHEDULE NO.ICF/SK-102-505, ISSUE STATUS-01, REV.00. DRG.NO.DMU/DPC7-3-5-701 SPECIFICATION ICF/MD/SPEC-166 ISSUESTATUS-01,REV.03 WITH AMENDMENT NO-03 AND MATERIAL SCHEDULE NO.ICF/SK-10-2-508 REV-01, WITH C-S NO-01. 3.8 SUPPLY OF STAINLESS STEEL PIPES AND DOUBLE FERRULE FITTINGS FORWGSCWAC,WGSCZAC & WGFSCWAC COACHES SUPPLY OF STAINLESS STEEL TUBES AND DOUBLE FERRULE FITTINGS FOR AC(WGSCWAC, WGSCZAC,WGFSCWAC AND WGFAC) AND NON-AC GS SDC,SCN, WCB,SLR & SRD) COACHES TO TO BE PROCURED FROM ICF APPROVED SOURCES ONLY. 3.8 SUPPLY OF STAINLESS STEEL TUBES AND DOUBLE FERRULE FITTINGS FOR UNCOMMON ITEMS TO SLR COACHES TO BE PROCURED FROM ICF APPROVED SOURCES ONLY. MATERIAL SCHEDULE NO ICF/SK-10-2-507,ISSUE STATUS 01. REV.03 CS.01 READ ALONG WITH SPEC.NO.ICF/MD/SPEC 166, ISSUE STATUS 01, REV.03 WITH AMD NO.03. TO SPECIFICATION ICF/MD/SPEC -166 ISSUE STATUS 01 REV.03 WITH AMD NO.03 AND MATERIAL SCHEDULE NO.ICF/SK-10-2506 ISSUE STATUS-01, REV NO.02 C.S 01 & 02. 3.8 SUPPLY OF STAINLESS TUBES AND DOUBLE FERRULE FITTINGS FOR MRVC-C COACHES TO SCHEMATIC READ ALONG WITH (LATEST REV/AMENDMENT) AND TO BE PROCURED FROM ICF APPROVED SOURCES ONLY. MATERIAL SCHEDULE NO.ICF/SK 10-2-518 ISSUE STATUS 01 REV.01 AND WITH C.S. NO.03. DRG.NO.ICF/MRVC/C-3-5-001 ALT'b' 31357570 III ICF 3.8 SUPPLY OF STAINLESS TUBES AND DOUBLE FERRULE FITTINGS FOR MRVC/D/HC COACHES TO SCHEMATIC READ ALONG WITH ICF/MD/SPECN- 166 ISSUE STATUS 01, LATEST REV/AMENDMENT AND TO BE PROCURED FROM ICF APPROVED SOURCES ONLY. MATERIAL SCHEDULE NO.ICF/SK 10-2-523 ISSUE STATUS 01 REV.01 WITH C.S.NO.03. DRG.NO.ICF/MRVC/D/HC 3-5-001 ALT-'c' III ICF 3.8 30358577 III ICF 30358589 III ICF 30358590 III ICF 31357581 3.8 3.8 3.8 3.9 3.10 SUPPLY OF STAINLESS TUBES AND DOUBLE FERRULE FITTINGS FOR MRVC MOTOR COACHES, TO SCHEMATIC READ LONG AND TO BE PROCURED FROM ICF APPROVED SOURCES ONLY. SUPPLY OF STAINLESS TUBES AND DOUBLE FERRULE FITTINGS FOR MRVC/D COACHES TO SCHEMATICREAD ALONG WITH LATEST/REV/AMENDMENT AND TO BE PROCURED FROM ICF APPROVED SOURCES ONLY. SUPPLY OF SS TUBES AND DOUBLE FERRULE FITTINGS FOR PNEUMATIC CONTROLEQUIPMENT (CDTS) FOR DMU/TC, AC & NON AC COACHES TO SLACK ADJUSTER TYPE IRSA 450 TO SPECNAND Solid Forged Wheels (rough turned) for BG Coaching stock 3.10 16 Tonne BG coaoching wheelsets with cast wheels by RWF Solid Forged Wheels (Rolled size Rough Turned) 3.10 FULLY MACHINED AXLE BOX FRONT COVER TO.GUARANTEE:SUPPLIERS OF AXLE BOX FRONT COVER SHALL GUARANTEE REPLACEMENT FREEOF COST OF SUCH ITEMS WHICH MAY BE DEVELOP DEFECTS WITHIN ONE YEAR FROM THE DATE OF TAKING COACH INTO REGULAR SERVICE OR WITHIN TWO YEARS FROM THE DATE OF RECEIPT OF SUPPLY WHICHEVER IS EARLIER. 3.10 MATERIAL SCHEDULE NO.ICF/SK 10-2-521 ISSUE STATUS 01 REV.02. WITH C.S NO.03. DRG.NO. ICF/MRVC/M 3-5-001 ALT 'b' 31357593 III ICF MATERIAL SCHEDULE NO.ICF/SK 10-2-522 ISSUE STATUS 01 REV.01 WITH C.S. NO.04 ICF/MD/SPEC166ISSUE STATUS 01, DRG.NO. ICF/MRVC/D 3-5-001 ALT 'c' 31357600 III ICF 31357787 III ICF DRG. NO.T-3-3-711/1 ALT.m' 30331043 II ICF W/WL-1660/R alt. 12 30020372 III ICF WTAC 3-02-301 col.II alt. s 30020761 III ICF RDSO Sketch No.K-4004 alt.3 31027088 III ICF DRG.NO.T 0-2-633/2,ALT 'q' 30020888 III ICF SCHEDULE NO.ICF/SK10-2553.ISSUE STATUS 01, REV.00 CORRECTION SLIP01. RDSO SPECN.07-ABR-92 IRS R-19/93 (Part II) Rev.4 of July, 2012 IRS R-19/93 (Part II) For WHEELS IRS R-19/93 (Part II) Rev.4 of July, 2012 3.10 FINISH MACHINED COLLAR DRG.NO.EMU/M-0-1-035, ITEM 1, ALT 'NIL'. 3.10 SEALING RING FOR AXLE BOXTO BE PROCURED FROM ICF APPROVED SOURCES ONLY. EMU/M-0-2-012 ITEM-1 ALT 'c'. 31020150 III ICF EMU/M-0-2-013 ITEM 2 ALT`l'. 31020240 III ICF DRG.NO. T-0-1-634/2 ALT`k' 30011231 II ICF DRG NO-T-0-3-813 ALT 'c' 30321359 II ICF DRG.NO:T-0-3-813, ALT 'c' 30321360 II ICF DRG.NO. T-3-2-808, ITEM-3ALT 'd' 30326710 II ICF DRG.NO.T-3-2-809,ITEM-4, ALT 'b'. 30327179 II ICF T-0-3-626/1ALT-"s" DRG EMU 34031 ITEM-1 ALT `n' EMU/M-0-6-019/1 ALT 'NIL'. DRG EMU 34031 ITEM-2 ALT `n'. DRG EMU 3-4-031 ITEM 3 ALT `n'. III III III III III ICF ICF ICF ICF ICF 3.10 3.13 3.13 3.13 3.13 3.13 3.13 3.13 3.13 3.13 3.13 AXLE BOX FRONT COVER FULLY MACHINED TO DRG.NO.TO BE PROCURED FROM ICF APPROVED SOURCES ONLY. GUIDE BUSH FOR AXLE BOX GUIDE ARRGT. TO/7.TO BE PROCURED FROM RDSO APPROVED SOURCES ONLY. HPPA BUSHES FOR BOGIE ALTERNATOR BRACKETS TOITEM 1 HPPA BUSHES FOR BOGIE ALTERNATOR BRACKETS TOITEM -2. BRAKE GEAR BUSHES (HIGH PERFORMANCE POLYAMIDE) TO.TO BE PROCURED FROM RDSO APPROVED SOURCES ONLY. SELF LUBRICATED POLYESTER RESIN BUSHES FOR BOGIE BRAKE TO TO BE PROCURED FROM RDSO APPROVED SOURCES ONLY. BUSH FOR BOLSTER SPRING SUSPENSION BRACKET .ITEM COATED WITH RUST PROOF OIL SHALL BE COVERED IN BIODEGRADABLEPOLYTHENE COVER AND PACKED IN WOODEN CRATES. BUSH BUSH BUSH BUSH 31010544 III ICF 30922082 31340210 31930414 31340234 31340258 3.14 3.14 3.15 3.17 SCREW COUPLING ASSY.(ENHANCED) TO AND TO BE PROCURED FROM RDSO APPROVED SOURCES ONLY. INTER VEHICLE COUPLER PLUG TYPE `E' TOICF APPROVED SOURCESS ONLY BE ACCEPTABLE. DRAW GEAR GENERAL ARRANGEMENT TOAND THE DRAFT KEY COTTER TO BE TIED UP WITHA WIRE ROPE WITH DRAFT KEY.TO BE PROCURED FROM RDSO APPROVED SOURCES ONLY. SIDE BUFFER FIXING BOLT, NUT & WASHER TOITEM 12 =16NOS,ITEM.14 =16NOS AND ITEM.15 =16NOS. RDSO SPECN. C 9505 (REVISED)-NOV 1996. RDSO SPECN.C-9509 REVISION 02. 3.19 SIDE BUFFER ARRANGEMENT WITH FACE PLATE RIVETTED TO TO BE PROCURED FROM ICF APPROVEDSOURCES ONLY. ICF FOR PACKING CONDITION APPROVED SOURCES ONLY REFER TO NEED TO QUOTE. DRG.NO.ICF/J&T/SK-1714. LATERAL RUBBER STOP FOR AIR SPRING SUSPENSION 3.19 DESIGN, MANUFACTURE AND SUPPLY OF HIGH TENSILE AAR 'H' TYPE TIGHTLOCK CENTER BUFFER COUPLER AND ITS ASSOCIATED COMPONENTS FOR FITMENT ON BROAD GAUGE PASSENGER COACHES OF INDIAN RAILWAYS COUPLER RDSO SPECN STR.NO. MOUNTING ARRGT. ON C.K.009 (REV.02) COUPLER UNDERFRAME MOUNTING ARRGT. ON UNDER FRAME 3.17 DRG.NO.ICF/STD-2-2-009 ALT 'f' 30236095 II ICF DRG. NO. ICF/SK 75054-COL-I ALT `j' 31756396 III ICF DRG.NO.ICF/SK-2-1-011, COL.III, ALT 'y' 30216230 I ICF DRG.NO.ICF/STD-2-2-009 ALT 'f' 30220300 III ICF DRG.NO.ICF/STD-2-2-009/COL.I EXCEPT ITEMS-12,14 & 15,ALT `f'. 30220324 III ICF DMU/DPC5-0-5-502/1 ALT 'b'. 30051370 III ICF ICF DRG.NO.LWGFAC-2-1-001 ALT 'a' 30217106 III ICF 3.20 DRAW & BUFF GEAR, LEAF SPRING ITEMS, CENTRE ADJUSTMENT DEVICE AND DRAW HOOK FOR SCHAKU COUPLER AS PERRDSO APPROVED SOURCES ONLY NEED TO QUOTE. CHANNEL (MACHINED FOR CBC COUPLER ON ICF COACHES TOITEM-1 =4NOS AND ITEM-2 = 4NOS. 3.21 HIGHER CAPACITY AIR SPRING (180KN) AS PER FOUR SUCH SETS FORM ONE COACH SET. FASTENERS SHALL BE OF TVS (OR) UNBRAKO (OR) LPS MAKE ONLY. SPARE O-RINGS AND FASTENERS SHALL BE SUPPLIED AT THE RATE OF 1 (SET) FOR EACH COACH SET OF AIR SPRINGS AND PACKED SEPARATELY COACH-SET WISE. TO BE PROCURED FROM RDSO APPROVED SOURCES ONLY. 3.19 3.21 3.21 ICF/MD/SPEC.207 (REV.00).WITH AMENDMENT NO.1 SCOPE OF SUPPLY SHALL BE AS PER CLAUSE 2.0 (4 & 5) OF PART-B OF ICF/MD/SPEC.207 (REV.00) WITH AMENDMENT NO.1. 31930463 II ICF 31210053 III ICF 30057309 II ICF 30354298 II ICF MATERIAL SCHEDULE NO ICF/SK10-2-551 ISSUE STATUS.01 REV:01. 30358176 II ICF DRG NO-SCN7-2-1-704,ALT-'a' RDSO STR NO.C-K406 (REV.2) WITH AMENDMENT NO.1 AND 2 SCOPE OF SUPPLY SHALL BE AS PER CLAUSE 4.1 OF C-K406 (REV.2) WITH AMENDMENT NO.1 AND 2 .PACKING AS PER DRG.NO.ICF/J AND T/SK1718 AIR SUSPENSION CONTROL EQUIPMENT FOR AIR SPRINGS AS PER AND SCOPE OF SUPPLY SHALL BE LIMITED TO ITEMS 1,2,3&5(40LITRESRESERVOIR CLAUSE 4.2 OF RDSO CWITH 1/2" DRAIN VALUE) K407 REV-02. SUPPLY, INSTALLATION AND COMMISSIONING OF CONTROL EQUIPMENT FOR AIR SUSPENSION SYSTEM AND INSTALLATION OF SS TUBES & DOUBLE FERRULE FITTINGS SUPPLIED BY ICF FOR EMU AND DMU COACHES TOTO BE PROCURED FROM RDSO APPROVED SOURCES ONLY. RDSO STR NO-C-K407REV-02 3.21 AIR SUSPENSION CONTROL EQUIPMENTS FOR AIR SPRINGS AS PER GIVEN UNDER CLAUSE 4.2) 150 LIT. RESERVOIR SHALL BE (SEPARATELY PACKED)SHALL BE SUPPLIED. TO BE PROCURED FROM ICF APPROVED SOURCES ONLY. 3.22 AIR SUSPENSION CONTROL EQUIPMENTS FOR AIR SPRINGS (FOR MAINLINE STOCK) AND SCOPE OF SUPPLYSHALL BE LIMITED OF ITEMS-1,2 & 3 WITH 1/2" COMPACT DRAIN VALVE AT THE RATE OF 4NOS PER COACH.TO BE PROCURED FROM RDSO APPROVED SOURCES ONLY. SHOCK ABSORBER DOUBLE ACTING HYDRAULIC SHOCK ABSORBER FOR VERTICAL APPLICATION TO AND GUARANTEE SHALL BE AS PER CLAUSE 8 OF .TO BE PROCURED FROM RDSO APPROVED SOURCES ONLY. DOUBLE ACTING HYDRAULIC SHOCK ABSORBERS FOR VERTICAL APPLICATION TOAND GUARANTEE SHALL BE PROCURED FROM RDSO APPROVED SOURCES ONLY. DOUBLE ACTING HYDRAULIC SHOCK ABSORBER FOR LATERAL APPLICATIONN 3.22 DOUBLE ACTING HYDRAULIC SHOCK ABSORBER FOR LATERAL APPLICATION TO AND . TO BE PROCURED FROM RDSO APPROVED SOURCESONLY. 3.21 3.22 3.22 3.22 RDSO STR NO.C-K407 (REV2) WITHOUT HOSE CONNECTIONS (SL.NO.9 OF SCOPE OF SUPPLY AS PER RDSO/SK CG-K4026 ALT.1 (CLAUSE 6.5.2 OF STR NO. C-K407 REV.2) 20 LIT. RESERVOIR TO RDSO/SK NO.K-1053 ALT.1 WITH COMPACT DRAIN VALVE 30358462 II ICF 30358759 30016617 II I ICF ICF 30056068 I ICF DRG.NO.ICF/SK-0-5-015, ITEM-2, ALT `p' 30056070 I ICF ICF/SK 05 016/1 ALT A 30056081 I ICF DRG.NO.ICF/SK-0-5-016/4, ALT. `g' 30056925 I ICF ITEMS-1,2 & 3 OF CLAUSE 4.2 OF C-K407 (REV.02) DRG. NO. ICF/SK-01-192 ALT.`e'. RDSOSPECIFICATION C8703 (REV.02) GUARANTEE SHALL BE AS PER CLAUSE 8 OFRDSO SPECIFICATION C8703(REV.2) GUARANTEE SHALL BE AS PER CLAUSE 8 OF RDSO/SPECIFICATION C8703 (REV.02) 3.24 TRANSOM COMPLETE FOR AIR SPRING SUSPENSION BOGIE TO WITHOUT TOP FLANGE TO THE FIRM SHALL FULLFILL LATERAL DAMPER FOR SECONDARY-AIR SPRING SUSPENSION ARRANGEMENTAND.TO BE PROCURED FROM RDSO APPROVED SOURCES ONLY. VERTICAL DAMPER FOR SECONDARY AIR SPRING SUSPENSION ARRANGEMENT AND TO BE PROCURED FROM RDSO APPROVED SOURCES ONLY. VERTICAL DAMPER FOR SECONDARY AIR SPRING SUSPENSION ARRANGEMENT AND GUARANTEE SHALL BETO BE PROCURED FROM RDSO APPROVED SOURCES ONLY. LATERAL DAMPER FOR SECONDARY AIR SPRING SUSPENSION ARRANGEMENT AND GUARANTEE SHALL BETO BE PROCURED FROM RDSO APPROVED SOURCES ONLY. ONE SET OF BOGIE BOLSTER ARRANGEMENT FOR 13 T BOGIE TO CONSISTING OF 1 NO. BOGIE BOLSTER ASSY. TOAND 2 NOS. OF LOWER SPRING BEAM ASSY. BLOCK HANGER MODIFIED TOCONFIRMING TOTO BE PROCURED FROM RDSO APPROVED SOURCES ONLY. 3.24 HANGER 3.22 3.22 3.22 3.22 3.22 3.23 THE REQUIREMENTS AS DRG.NO.DC/EMU/M/ASR-0-3PER ICF/MD/SPECN.147,REV- 003/COL.VI, ALT 'j' DRG.NO.EMU/M02. WITH AMENDMENT NO.1. 0-3-032/ITEM-1.ALT 'g' 31036077 III ICF GUARANTEE SHALL BE AS PER CLAUSE8 OF RDSO SPECIFICATION C-8703 (REV- TO DRG NO.DC/EMU/M/ASR 0-52) 005/ITEM-1, ALT `n' 31050530 I ICF GUARANTEE SHALL BE AS PER CLAUSE 8 OFSPECIFICATION C-8703 (REV.2). TO DRG.NO.DMU/DPC5 0-5503/ITEM-2 ALT.`k' 31050542 I ICF AS PER CLAUSE 8 OF SPECIFICATION C-8703 (REV.2). TO DRG. NO.DMU/DPC5 0-5503/ITEM 1 ALT k, 31050554 I ICF AS PER CLAUSE 8OF RDSO SPECIFICATION C 8703 TO DRG.NO.DC/EMU/M/ASR 0-5(REV.2). 005/ITEM2 ALT `n' 31050566 I ICF SPECN. ICF/MD/SPECN/094. DRG.NO. T-04-601. COL.IV 30040243 III ICF RDSO SPECIFICATION C9808 REV.04 WITH CORRIGENDUM NO.1. DRG.NO.T-32-645, ITEM-1, ALT `h', 30922173 II ICF DRG NO, T-05-639, ITEM -1,ALT.'G'. 30922525 II ICF 3.26 BOGIE FRAME ARRANGEMENT FOR YRD4 DRIVING BOGIE TO AND (1 NO. PER SET) INCLUDING BOGIE BOLSTER ARRANGEMENTS FOR YRD4 DRIVING BOGIE (1 NO. PER SET) AND LOWER SPRING BEAM ARRANGEMENT YRD4 DRIVING ICF SPECN.NO. BOGIE AND (2NOS. PER SET) M/D/SPECN./089 HANGER BLOCK FOR BOLSTER SUSPENSION . HANGER BRAKE BEAM FOR AIR BRAKE COACHES (MODIFIED). BRAKE BEAM COMPLETE.(WITHOUT BUSHES WHEREVER APPLICABLE). 3.26 BRAKE BEAM (NYLON BUSH). ANTI-CORROSION EPOXY COATING SHOULD BE A RDSO APPROVED PRODUCT AND THE FIRM SHALL SUBMIT CERTIFICATE ISSUED BY M&C DIRECTORATE OF RDSO FOR CONFORMING FINISHED ITEMS SHALL BE PACKED IN WOODEN CRATES TO AVOID PAINT DAMAGE DURING TRANSIT AND MACHINED SURFACES TO BE RUST PROOF OIL COATED AND COVERED WITH BIODEGRADABLE PLASTIC SHEETS.ICF APPROVED SOURCES ONLY NEED TO QUOTE. 3.26 BRAKE BEAM INNER AND OUTER TO COL.I -4NOS.(WITHOUT NYLON BUSHES WHEREVER APPLICABLE), (WITHOUT NYLON BUSHES WHEREVER APPLICABLE). 3.25 3.25 3.25 3.26 TO RDSO SPECN.M&C/PCN/123/2006 WITH AMENDMENT NO.1. DRG.NO. YRD 4-03-202/COL.I TO DRG.NO. MG/T-05-060 COL.VII 30034358 III ICF DRG.NO. T-0-5-638/ITEM-1, ALT.`C' 30051046 T-05-63-901 30051058 DRG.NO.T-3-2-650/COL-IALT. `J' WITHOUT ITEM - 11 30321347 III III ICF ICF III ICF GS7-3-2-710 COL.I. ALT 'b' 30326618 III ICF TO DRG.NO.T-3-2-624/COL.IV, ALT.'L' - WITHOUT ITEM-6 30921995 III ICF DRG.NOS.DMU/DPC5-3-2-505, ALT 'a', 31321550 III ICF 3.28 3.29 3.29 3.29 3.29 3.30 3.30 3.30 3.32 SAFETY WIRE ROPE FOR BRAKE BEAM TOTO BE PROCURED FROM ICF APPROVED SOURCES ONLY. SPECIAL SCREW FOR AXLE BOX GUIDE ARRGT TO /15THE MANFACTURER'S NAME/LOGO SHALL BE STAMPED ON SCREW HEAD. HEX.HEAD SCREW. TO BE PROCURED FROM ICF APPROVED SOURCES ONLY. HEX HEAD SCREW. TO BE PROCURED FROM ICF APPROVED SOURCES ONLY. LOCKING PLATE FOR WHEEL AND AXLE LOCKING PLATE FOR CENTER PIVOT ARRANGEMENT LOCKING PLATE FOR CENTRE PIVOT ARRANGEMENT (FOR CRASH WORTHY COACHES) LOCKING PLATE FOR ANCHOR LINK SCREWS AXLE BOX HOUSING (ROUGH MACHINED) TO GUARANTEE SHALL BE AS PER CLAUSE 13 OF FINISH MACHINED AXLE BOX HOUSING SHALL BE GIVEN A PEELABLE PLASTIC COATING OF 25-35 MICRONS THICKNESS OVER MAIN BORE AREA (OR) MAIN BORE SHALL BE TIGHTLY CLOSED ON BOTH ENDS WITH PLASTIC COVERS TO AVOID ENTRY OF DUST AND MOISTURE EACH FINISHED MACHINED AXLE BOX HOUSING SHALL BE COVERED WITH PLASTIC THAT (THICKNESS 25 MICRONS MIN) AND PACKED PROPERLY TO AVOID DAMAGE DURING TRANSIT, ICF APPROVED SOURCES ONLY NEED TO QUOTE. DRG.NO.T 3-2-651 COL.I ALT`j'. 30321256 III ICF 30011085 III ICF 30020189 III ICF 30020591 III ICF DRG.NO.T-0-2-819/1 ALT 'b'. 30020931 III ICF DRG.NO.T-0-6-612, ITEM 1,ALT'c'. 30064193 III ICF GS7-0-6-706/1, ALT 'NIL'. 30064200 III ICF T-0-7-610/1 ALT. `e' 30070442 III ICF DRG NO.T-0-2-602/ITEM 3,ALT 'u' 30020414 III ICF DRG.NO.T-0-1-616/2 ALT `l' TO RDSO SPECIFICATIONC9307 (REV.2)WITH AMD-NO1. DRG.NO.T-0-2-619/ITEM-2 ALT 't' RDSOSPECIFICATION C9307 (REV.2) WITH AMENDMENT NO.1. DRG. NO.T-O-2-619/ITEM-1 ALT. 't' RDSO SPECIFICATION NO.RDSO/2007/CG-08 WITH AMENDMENT SLIP NO.1. 3.32 3.32 3.32 3.32 3.32 3.32 3.33 3.33 AXLE BOX HOUSING (FINISH MACHINED) TO GUARANTEE SHALL BE AS PER CLAUSE 13 OF,FINISH MACHINED AXLE BOX HOUSING SHALL BE GIVEN A PEELABLE PLASTIC COATING OF 25-35 MICRON THICKNESS OVER MAIN BORE AREA. (OR) MAIN BORE SHALL BE TIGHTLY CLOSED ON BOTH ENDS WITH PLASTIC COVERS TO AVOID ENTRY OR DUST & MOISTURE EACH FINISH MACHINED AXLE BOX HOUSING SHALL BE COVERED WITH PLASTIC SHEETS (THICKNESS 25 MICRONS MIN) AND PACKED PROPERLY TO AVOID DAMAGE DURING TRANSIT.TO BE PROCURED FROM ICF APPROVED SOURCES ONLY. AXLE BOX HOUSING (ROUGH MACHINED) AXLE BOX HOUSING (ROUGH MACHINED) TOGUARANTEE SHALL BE AXLE BOX REAR COVER FULLY MACHINED .TO BE PROCURED FROM ICF APPROVED SOURCES ONLY. AXLE BOX HOUSING (FULLY MACHINED) BEARING BOX. TO BE PROCURED FROM ICF APPROVED SOURCES ONLY. LOWER SPRING SEAT TO THE MANUFACTURER'SNAME,MONTH AND YEAR OF MANUFACTURING SHALL BE PUNCHED ON THE ITEM FORIDENTIFICATION. LOWER RUBBER WASHER FOR AXLE BOX GUIDE ARRGT. RDSO SPECIFICATION NO.RDSO/2007/CG-08 WITH AMENDMENT SLIP NO.1 AS PER CLAUSE 13 OF RDSO SPECIFICATION NO.RDSO/2007/CG-08. RDSO 2007/CG/08 DRG.NO.T-0-2-602/ITEM-2 ALT 'u' DRG.NO. MG/T-0-2-002/ ITEM-3 ALT 'm'. 30020487 III ICF 30024031 III ICF DRG.NO.EMU/M-0-2-002/ITEM-3 ALT 'H' 31020021 III ICF DRG.NO.EMU/M-0-2-004 ITEM-2 ALT `u' 31020239 III ICF EMU/M/0-2-002 ITEM 2 ALT H 31027064 III ICF DRG NO.EMU 34029, ITEM-1 ALT `n' 31340180 III ICF DRG.NO.DL-0-1-103,COL.II, ALT`z'. 30010676 III ICF DRG.NO.T-0-1-601/1ALT `w'. 30010755 ICF 3.33 GUIDE RING (ACETAL HOMOPOLYMER) FOR AXLE BOX GUIDE ARRANGEMENT T0/2'.TO BE PROCURED FROM RDSO APPROVED SOURCES ONLY. HYTREL UPPER WASHER WITH AMENDMENT NO.2 AND TO-1NO AND HYTREL LOWER WASHER RDSO APPROVED SOURCES TO SPECN.RDSO.C-KONLY NEED TO QUOTE. 409REV-2 COLLAR ITEM-1 8NOS.RETAINING RING -8 NOSRING -8 NOS.(ITEMS 1 TO 3 MAKES ONE COACH SET ). 3.33 1.RING - 8NOS. 2.COLLAR 8NOS. 3.SECURING CUP 8NOS.SL.NOS. 1 TO 3 MAKES ONE SET AND TO BE SUPPLIED IN SETS ONLY. 3.33 3.33 3.33 BSS BRACKET TO DRG. NO.T 0-1-640/1, ALT.`b 30011255 II ICF DRG.NO.CG.K4058 ALT 3 30011334 II ICF III ICF III ICF III ICF DRG.NO.T-0-2-621 ALT 'h' ITEM-1 DRG.NO.T-0-2-629 ALT 'j' ITEM-1 TO DRG.NO.T-0-2-628 ALT.'f' 30020724 RING- DRG.NO.EMU/M-0-2-006, ITEM-1, ALT 'j'- COLLAR TO DRG.NO.EMU/M-0-2-005, ITEM-1, ALT 'p, SECURING CUPDRG.NO.EMU/M-0-2-007ITEM 1, ALT 'NIL' 30020934 DRAWING NO.T-0-3-622/COL.I ALT 'q'. 30030160 3.33 GUIDE WITH CLOSING PLATE FOR AXLE BOX GUIDE ARRANGEMENT TO. GUIDES SHALL BE APPLIED WITH RUST PREVENTIVE OIL ON THE MACHINED SURFACES AND EACH GUIDE SHALL BE COVERED WITH BIODEGRADABLE POLYTHENE COVER (THICKNESS 25 MICRONS MINIMUM) THE FINISH MACHINED PORTION OF THE GUIDE WITH 115MM DIA SHALL BE TIGHTLY COVERED WITH FRP/HDPE SLEEVE AND PACKED IN WOODEN CRATES HAVING 2 GUIDES IN EACH CRATE. THE SUPPLIER SHALL ENSURE THAT THE MACHINED SURFACES ARE NOT DAMAGED DURING TRANSIT. TO BE PROCURED FROM ICF APPROVED SOURCES ONLY. DRG.NO.T-0-3-670/COL-I.ALT-'l' 30030225 III ICF 3.33 UPPER RUBBER WASHER FOR BOGIE BOLSTER SUSPENSION TO'.RDSO APPROVED SOURCES ONLY NEED TO QUOTE. T 0-618 /1 ALT P 30050807 II ICF DRG.NO.T-0-3-635 COL-II. ALT'l 30030330 III ICF DRG.NO.ICF/SK-03208 COL-I, ALT`c'. DRG.NO.T-03-601 COL.VII 30030468 30030500 III III ICF ICF 3.33 3.33 3.33 ANCHOR LINK BRACKET . THE FIRM SHALL SUBMIT WELDING PROCEDURE SPECIFICATION (WPS) CERTIFIED BY THIRD PARTY LIKE M/S.RITES, M/S.TUV, M/S.BVQI, M/S.LLOYDS ETC., FOR THE FIRST TIME SUPPLY, BEFORE PLACEMENT OF ORDER. THE SUBMITTED WPS SHALL BE CLEARED BY DESIGN OFFICE/ICF. BRAKE HANGER BRACKET HEAD STOCK (FABRICATED DESIGN) BOGIE FRAME COMPLETE 3.33 BOGIE FRAME ARRGT.(13T) WITHOUT GUIDE & THE FIRM SHALL FULFIL THE REQUIREMENTS RDSOSPECN.C-9202 WITH AMENDMENT NO.1. SPEC ICF/MD/SPECN.147. DRG. NO. T-0-3-804 COL-III 30030535 III ICF 3.33 BOGIE ITEMS CONSISTING OF (1) BRAKE HANGER BRACKET FOR BOGIE FRAME = 4NOS. (2) BRAKE HANGER BRACKET FOR BOGIE FRAME (3) LATERAL DAMPER ASSEMBLY BRACKET =2NOS. (4) INSTALLATION LEVER BRACKET ASSY. = 2NOS. (5) STOPPER ASSEMBLY 2NOS. (6) STOPPER ASSEMBLY = 2NOS. (7) STOPPER ASSEMBLY = 4NOS. (8) BRAKE BLOCK HANGER BRACKET (9) BRAKE BLOCK HANGER BRACKET = 2NOS (10) WIRE ROPE BRACKET = 4NOS. (11)BENT PIPE COMPLETE =8NOS (12)WIRE ROPE BRACKET NIL=8NOS. DRG.NO.DC/EMU/M-0-3-008 COL-I, ALT `g TO DRG.NO.DC/EMU/M-0-3008 COL-II, ALT `g'=4NOS.,DRG.NO.DC/EMU/M/ASR0-3-002 COL-IV,DRG.NO.DMU/DPC5 -0-3-509 COL.I, ALT`a'= 2NOS. (6) DRG.NO.DMU/DPC5-0-3- 509 COL.II,ALT`a' = 2NOS. (7) DRG.NO.DMU/DPC5-0-3-511 COL.I,ALT `'a' = 4NOS. (8) DRG.NO.DMU/DPC5-0-3- 520COL.I, ALT `NIL'= 2NOS. (9) TO DRG.NO.DMU/DPC5-0-3-520 COL.II,ALT` NIL' = 2NOS (10) DRG.NO.AC/EMU/M/ASR-0-3-003 COL.II,ALT`NIL' = 4NOS. (11) DRG.NO.DMU/DPC5 0-3-527/COL-I ALT-NIL=8NOS (12) TO DRG.NO.AC/EMU/M/ASR-0-3-003/1 ALT-NIL=8NOS.ALT `h' DRG.NO.DMU/ DPC5-0-3-502 COLIV, ALT `j 30030584 III ICF 3.33 BRACKET FOR ANCHOR LINK ON BOGIE FRAME (BOLTED DESIGN) DRG.NO.T-0-3-680,COL.I, ALT 'NIL'. 30030596 III ICF 3.33 BOGIE FRAME COMPLETE (WITH GUIDE) AND THE FIRM SHALL FULFIL THE REQUIREMENT AND SPECIAL CONDITION AS PER ANNEXURE.TO BE PROCURED FROM ICF APPROVED SOURCES RDSO SPECN.C-9202 ONLY. REV.02. TO DRG.NO.T-0-3-920, COL.I, ALT'h' AS PER ICF/MD/SPECN.147 ISSUE STATUS 01, REV.02WITH AMENDMENT NO.1 III ICF 30034358 3.33 BOGIE FRAME COMPLETE WITH ROLLED SECTION (WITHOUT GUIDE) THE FIRM SHALL FULFIL THE REQUIREMENT WITH AMENDMENT NO.1. SPECIAL CONDITION AS PER ANNEXURE. ICF/APPROVED SOURCES ONLY NEED TO QUOTE. 3.33 GUIDE WITH CLOSING PLATE FOR AXLE BOX GUIDE ARRANGEMENT TO DRG.NO.EMU/M-0-3-094 COL.I ALT 'g'. GUIDES SHALL BE APPLIED WITH RUST PREVENTIVE OIL ON THE MACHINED SURFACES AND EACH GUIDE SHALL BE COVERED WITH BIODEGRADABLE POLYTHENE COVER (THICKNESS 25 MICRONS MINIMUM) THE FINISH MACHINED PORTION OF THE GUIDE WITH 115MM DIA SHALL BE TIGHTLY COVERED WITH FRP/HDPE SLEEVE AND PACKED IN WOODEN CRATES HAVING 2 GUIDES IN EACH CRATE. THE SUPPLIER SHALL ENSURE THAT THE MACHINED SURFACES ARE NOT DAMAGED DURING TRANSIT. AND RDSO/SPEC C-9202 ,REV-02. AS PER ICF/MD/SPEC-147, ISSUE STATUS 01, REV.02 TO DRG.NO.T-0-3-920,COL-I ALT 'h' 30034437 III ICF 30034449 III ICF 3.33 GUIDE WITH CLOSING PLATE FOR AXLE BOX GUIDE ARRGT WITH CIRCLIP TO THE FINISH MACHINED PORTION OF THE GUIDE WITH 115MM DIA SHALL BE TIGHTLY COVERED WITH FRP/HDPE SLEEVE PROTECTING THE END AND PACKED IN WOODEN CRATES HAVING 2 GUIDES IN EACH CRATE. THE SUPPLIER SHALL ENSURE THAT THE MACHINED SURFACES ARE NOT DAMAGED DURING TRANSIT. GUIDES SHALL BE APPLIED WITH RUST PROTECTIVE OIL COVERING ALL THE MACHINED SURFACES.TO BE PROCURED FROM ICF APPROVED SOURCES ONLY. BRACKET ASSEMBLY FOR BOGIE SUPPORT FRAME HOUSING-STEEL CASTING FOR CENTRE PIVOT ON BOGIE BOLSTER TO 3.33 STEEL CASTING ROUGH MACHINED FOR CENTRE PIVOT HOUSING TO. MACHINED PORTIONS SHALL BE COATED WITH RUST PREVENTION OIL AND OTHER OUTER PORTION SHALL BE PAINTED WITH RED OXIDE ZINC CHROMATE PRIMER TO A THICKNESS OF 15-20 MICRONS. GURANTEE- ITEM SHALL BE GURANTED AGAINST BLOW HOLES POROSITY OR CRACKS FOR ONE YEAR FROM THE DATE OF SUPPLY.TO BE PROCURED FROM ICF APPROVED SOURCES ONLY. TO SPEC. IS:2074/92 3.33 3.33 DRG.NO.T-O-3-670/COL-II ALT 'l'. 30037116 III ICF GS7-0-3-708, COL.I, ALT 'NIL'. 30037153 III ICF DRG.NO.GS7-0-4-703/1, ALT 'NIL'. 30040255 III ICF DRG.NO.ICF/SK 0-4-042/ITEM.1. ALT 'h' 30047092 III ICF 3.33 BOGIE BOLSTER ARRANGEMENT 13T TO ,(WITHOUT NYLON BUSH ITEM 7) ANDTHE FIRM SHALL FULFIL THE REQUIREMENTS "BOGIE BOLSTER WEARING PLATE INSIDE THE SIDE BEARER HOUSING SHOULD BE FREE FROM SPATTER, OILED AND COVERED CONDITION." ICF APPROVED SOURCES ONLY NEED TO QUOTE.ITEM SHALL BE SUITABLE PACKED TO AVOID INGRESS OF WATER IN CENTRE PIVOT HOUSING AND SIDE BEARER HOUSING -BIODEGRADABLE PLASTIC COVERS MAY BE USED FOR CLOSING. ALL THE MACHINED AREAS SHALL BE COATED WITH GREESE (LITHIUM BASED) BEFORE PACKING. PACKING CONDITION IS BRACKET FOR ANCHOR LINK ON BOGIE BOLSTER (BOLTED DESIGN) TO FOR NON AC COACHES. BRACKET FOR ANCHOR LINK ON BOGIE BOLSTER (BOLTED DESIGNFOR AC COACHES. WEARING PIECE FOR SIDE BEARER TOTO BE PROCURED FROM ICF APPROVED SOURCES ONLY. 3.33 UPPER RUBBER WASHER FOR BOGIE BOLSTER SUSPENSION TO.RDSO APPROVED SOURCES ONLY NEED TO QUOTE. 3.33 3.33 3.33 ICF/MD/SPECN.094,REV.00. AS PER ICF/MD/SPECN.147 REV.2. AMD.1. AS PER DRAWING NO:ICF/J&T/SK1768. DRG.NO.T-0-4-654,COL.I, ALT'f' 30047109 III ICF DRG.NO.T-0-4-657 COL.I, ALT 'b' 30047134 III ICF T-0-4-657, COL.IIALT 'b' 30047146 III ICF DRG. NO. T0-5-649/1.ALT`k' 30051149 III ICF DRG.NO. T-0-5-618/1ALT `p' 30051277 II ICF 3.33 LOWER SPRING BEAM ARRANGEMENT TO'AND CONFORMING TOTHE FIRM SHALL FULFIL THE REQUIREMENTS FINISHED ITEMS SHALL BE PACKED IN WOODEN CRATES TO AVOID PAINTDAMAGE DURING TRANSIST AND MACHINED SURFACES TO BE RUST PROOF OIL COATED AND COVERED WITH BIO DEGRADABLE PLASTIC SHEETS.TO BE PROCURED FROM ICF APPROVED SOURCES ONLY. THE ITEM SHOULD BE COATED WITH TWO COATS OF HIGH PERFORMANCE ANTI CORROSIONS EPOXY COATING ICF/MD/SPECN.094 REV.00 (TWO PACKS) GREEN FINISHING WITH AMENDMENT NO.1. BOGIE ITEM CONSISTING OF (1) TOP FLANGE FOR L.S.BEAM =2NOS. (2) BOTTOM FLANGE FOR L.S.BEAM =2NOS. (3) RIB =6NOS.(4) LUG =4NOS. (5) LUG =12NOS. THE ITEMS SHALL BE PACKED SETWISE FIRST IN BIODEGRADABLE POLYTHENE COVERS AND THEN IN WOODEN CRATES. 3.33 BOGIE ITEMS CONSISTING OF (1) TOP FLANGE FOR L.S.BEAM TO2NOS. (2) BOTTOM FLANGE FOR L.S.BEAM TO-2NOS. (3) WEB TO '4NOS. (4) RIB TO'- 6NOS. (5) LUG FOR SAFETY STRAP -4 NOS. (6) LUG TO -12NOS.THE ITEMS SHALL BE PACKED SETWISE FIRST IN BIO-DEGRADABLE POLYTHENE COVERS AND THEN IN WOODEN CRATES. 3.33 DRG.NO.T-0-5-667/COL.I ALT -'j 30054205 DRG.NO. T-0-5-644/ITEM-1,ALT `f DRG.NO.T-0-5-606 ITEM-1,ALT `h' DRG.NO.T-0-5-611 ITEM-1, ALT`m' DRG.NO.DC/EMU/M-0-5-005 ITEM14, ALT`n' TO DRG.NO.T-0-5645/ITEM-1,ALT `f' 30057267 1. DRG.NO.WLRRM-0-5-005 ITEM 1, ALT `a' 2. DRG.NO.WLRRM-0-5-005 ITEM2,ALT `a' 3. DRG. NO WLRRM-0-5-005 ITEM 3 ALT 'a' 4. DRG. NO WLRRRM-0-5-005 ITEM 4 ALT 'a' 5. DRG NO WLRRM 0-5-005 ITEM 4 ALT 'a' 6.DRG NO DC/EMU/M-0-5-005 ITEM 14 ALT 'N' 30057279 III ICF III ICF ICF ICF III ICF 3.33 BRACKET FOR L.S.BEAM TO4NOS. (WITHOUT ITEM-3), COL.II 4NOS, (WITHOUT ITEM-3) AND L.S.BEAM STOPPER TO-24NOS. (ALL THE ITEMS MAKE ONE COACH SET AND TO BE SUPPLIED AS COACH SET ONLY).MANUFACTURER NAME & YEAR TO BE STAMPED IN EACH ITEM. 3.33 BRACKET FOR LS BEAM TO 2NOS, (WITHOUT ITEM 13) ALT`d' -2NOS, -12 NOS.& -4 NOS. ITEM SHALL BE PACKED SET WISE, FIRST IN BIO-DEGRADABLE POLYTHENE COVERS AND THEN IN WOODEN CRATES. 3.33 3.33 BOGIE SUPPORT FRAME BOGIE SUPPORT FRAME FOR BOLSTER & SUSPENSION ARRANGEMENT FOR CRASHWORTHYCOACHES ' WITHOUT BUSHES WHEREEVERAPPLICABLE. 3.33 CENTRE PIVOT PIN -1NO AND COTTER FOR CENTRE PIVOT PIN -1 NO. TEST CERTIFICATE FOR NORMALISING AS PER DRAWING SHALL BE SUBMITTED WITH EACH LOT. ONE NUMBER PER ORDER MAY BE DESTRUCTIVE TESTED AT ICF TO ASCERTAIN GRAIN FLOW AND GRAIN SIZE. EACH SET SHALL BE COVERED WITH PLASTIC SHEET (25 MICRONS THICKNESS MINIMUM) AND PACKED IN WOODEN CRATE(MAX 2 SET PER CRATE). TO BE PROCURED FROM ICF APPROVED SOURCES ONLY. DRG.NO.T-0-5-666 ALT 'e' COL.I DRG.NO.T-0-5-672/2 ALT 'NIL' 30057280 III ICF III ICF III ICF DRG.NO.GS7-0-5-702, COL.II, ALT 'a 30057322 III ICF DRG.NO.T-0-6-602/1, ALT 'A' DRG.NO.T-0-6-604/1 ALT 'P' III ICF DRG.NO.WLRRM-0-5-005/COL.II (WITHOUT ITEM 13) ALT `d' WLRRM-0-5-005/COL.III WLRRM-0-5007/2 ALT 'NIL' 30057292 DRG.NO.GS7-0-5-702, COL.I, ALT 'a'. T-0-5-672/2 ALT. NIL 30057310 30060450 3.33 3.33 3.33 3.33 3.33 3.33 3.33 3.33 3.33 3.33 HEX HEAD BOLT COMPLETE FOR CENTRE PIVOT ARRGT. TO ITEMS COATED WITH RUST PREVENTIVE OIL SHALL BE COVERED INBIO-DEGRADABLE POLYTHENE COVER BOLT SHALL BE OF MAKE TVS OR UNBRAKO OR LPSONLY.TO BE PROCURED FROM ICF APPROVED SOUR CENTRE PIVOT PIN COMPLETE (SINGLE PIECE DESIGN) TO TO BE PROCURED FROM ICF APPROVED SOURCES ONLY. ADJUSTER (STEEL CASTING) TOTO BE PROCURED FROM ICF APPROVED SOURCES ONLY. LEVER HANGER . BEARING ADJUSTER (FABRICATED DESIGN) BELT TENSIONING BRACKET TO.ITEM COATED WITH RUST PREVENTIVE OIL SHALL BE COVERED WITH BIODEGRADABLEPOLYTHENE COVER AND PACKED IN WOODEN CRATES. SPIGOT HOUSING TO (ITEM.1 SHOULD BESUPPLIED IN LOOSE CONDITION). THE MANUFACTURER'S NAME, MONTH AND YEAR OFMANUFACTURE SHALL BE PUNCHED ON THE ITEM FOR IDENTIFICATION. UPPER RUBBER WASHER FOR AXLE BOX GUIDE ARRGT. TO LOWER RUBBER WASHER FOR AXLE BOX GUIDE ARRGT.TOTO BE PROCURED FROM RDSO APPROVED SOURCES ONLY. DRG.NO.T-0-6-614/COL.IALT 'd' 30060606 III ICF DRG.NO.ICF/SK3-0-6-001/COL.I ALT 'a' 30067042 III ICF DRG. T-3-1-804/1 ALT.`f'. DRG.NO.GS7-3-2-709/1, ALT 'NIL' 30310441 30326655 III III ICF ICF DRG.NO.T-0-5-642 ITEM-1, ALT. `x'. 30922008 III ICF DRG NO.T-3-1-807,ITEM-1,ALT-"a' 30922045 III ICF DRG.NO.T-0-3-678/COL.II. ALT.`g' 30922150 III ICF DRG.NO.ICF/SK-04-099 COL.I, ALT 'c' 30922665 III ICF DRG.NO. EMU-0-1-005ALT `p'. 31010131 II ICF DRG.NO.EMU/M-0-1-008/1, ALT's'. 31010246 II ICF 3.33 3.33 3.33 LOWER SPRING SEAT FORGED TO TOSUIT THE MACHINED COMPONENT LOWER SPRING SEAT (FORGED) TOSUIT THE MACHINED COMPONENT GUIDE BUSH FOR AXLE BOX GUIDE ARRGT 3.33 LOWER SPRING BEAM & VERTICAL BRACKET ASSEMBLY TO THE FIRM SHALL FULFIL THE REQUIREMENTS QAP SHALL BE SUBMITTED FOR APPROVAL OF ICF.TO BE PROCURED FROM ICF APPROVED SOURCES. HEADSTOCK COMPLETE FOR BOGIE FRAME TOTHE FIRM SHALL FULLFILL THE REQUIREMENTS AS PER ICF APPROVED SOURCES ONLY NEED TO QUOTE. BOGIE FRAME AND QAP SHALL BE SUBMITTED FOR APPROVAL OF ICF.SPECIAL CONDITION AS PER ANNEXURE. TO BE PROCURED FROM ICF APPROVED SOURCES ONLY. 3.33 EMU GUIDE (FORGED) TO SUIT THEFINISH MACHINED COMPONENT TO 3.33 3.33 ICF/MD/SPECN.094,ISSUE STATUS 01, REV.00. ICF/MD/SPECN.147, REV02.WITH AMENDMENT NO.01. RDSO/SPECN. C-9202 REV02.THE FIRM SHALL FULFIL THE REQUIREMENT AS PER ICF/MD/SPECN.147 ISSUE STATUS 01, REV.02. WITH AMENDMENT NO.01. DRG.NO.ICF/J&T/SK/FORGE-0-1219/1, ALT 'b' .PACKING CONDITION AS PER DRG.NO.ICF/J&T/SK-1766 ALT 'NIL' 31010532 TO DRG.NO.T-0-1-642/1, ALT 'c'. PACKING CONDITION AS PER DRG.NO.ICF/J&T/SK-1766. 31010581 III ICF III ICF DRG NO.EMU/M-0-1-023/2 ALT `e'. 31016030 I ICF DRG.NO. DMU/DPC10-0-3010/COL.I, ALT 'NIL' AND GENERALLY CONFORMING 31036065 III ICF DRG.NO.EMU/M/0-3-004 COL.I, ALT 'h' 31036089 III ICF DRG.NO.ICF/MRVC/M-0-3001/COL.I ALT.'a' (WITHOUT NYLON BUSHES WHERE EVER APPLICABLE) 31036090 III ICF DRG.NO.ICF/J&T/SK/FORGE-0-3201, ALT 'b' DRG.NO.EMU/M-0-3094/1, ALT 'h'AND TO DRG.NO-T-0-3670/1 ALT 'i' AND T-0-3-670/2 ALT 'i'. 31036107 III ICF 3.33 3.33 3.33 3.33 3.33 3.33 3.33 BOGIE BOLSTER ARRGT. AND THE FIRM SHALL FULFIL THE REQUIREMENTS, STATUS:01 WITH AMD NO:01. ITEM SHALL BE SUITABLEY PACKED TO AVOID INGRESS OF WATER IN CENTER PIVOT HOUSING AND SPIGOT HOUSING THREADED AIR CONNECTION AT BOLSTER END SHALL BE CLOSED BIODEGRADABLE PLASTIC/WOODEN COVERS MAY BE USED FOR CLOSING ALL MACHINED AREAS SHALL BE COATED WITH GREASE (LITHIUM BASED)BEFORE PACKING.TO BE PROCURED FROM ICF RDSO SPECN.C-9202 APPROVED SOURCES ONLY. REV.02. WEARING PIECE FOR SIDE BEARER ON BOLSTER SUSPENSION BRONZE TOTO BE PROCURED FROM ICF APPROVED SOURCES ONLY. RUBBING PLATE FOR BOLSTER SUSPENSION TO BE PROCURED FROM ICF APPROVED SOURCES ONLY. RUBBING PAD FOR BOGIE BOLSTER LINER FOR BOGIE FRAME(MANGENESE STEEL) BOTTOM BUSHTHE MANUFACTURERS NAME MONTH AND YEAROF MANUFACTURER SHALL BE STAMPED ON THE ITEM FOR IDENTIFICATION. TOP BUSH THE MANUFACTURERS NAME AND YEAR OFMANUFACTURER SHALL BE STAMPED ON THE ITEM FOR IDENTIFICATION. TO DRG.NO.ICF/MRVC/M-0-4001/COL.I, ALT 'f' AS PER ICF/MD/SPECN.147 (REV.02) PACKING CONDITION AS PER DRG.NO.ICF/J&T/SK-2047. 31040081 III ICF DRG.NO.EMU/M0-5-010/1 ALT 'k'. 31050130 III ICF DRG.NO.EMU/M0-5-010/1 ALT 'k'. TO DRG.NO.DMU/DPC5-0-5-507/1 ALT.NIL/2. 31050220 III ICF 31050608 III ICF ICF/SK/0-5-169/1 ALT 'a'. 31056106 III ICF EMU/M-0-6-005/1, ALT `k'. 31060020 III ICF EMU/M-0-6-005/1, ALT `k'. 31060031 III ICF 3.33 HEX HEAD BOLT COMPLETE FOR CENTRE PIVOT ARRGT. ITEMS COATED WITH RUST PREVENTIVE OIL SHALL BE COVERED INBIO-DEGRADABLE POLYTHENE COVER BOLT SHALL BE OF MAKE TVS OR UNBRAKO OR LPSONLY. TO BE PROCURED FROM ICF APPROVED EMU/M-0-6-014/COL.I ALT 'd' 31060122 III ICF 3.33 3.33 CENTRE PIVOT PIN COMPLETE ITEMSHALL BE COVERED WITH PLASTIC SHEET (25 MICRONS THICKNESS MINIMUM) ANDPACKED IN WOODEN CRATE. (MAX TWO NUMBERS PER CRATE).TO BE PROCURED FROM ICF APPROVED SOURCES. CENTRE PIVOT PIN COMPLETE EMU/M/-0-6-002/COL.III. ALT 'v' EMU/M-0-6-015 COL.I.ALT-'NIL'. 31060134 31060146 III III ICF ICF T-0-6-603 COL.II.ALT 'h'. 31060158 III ICF DRG NO-SCN7-2-1-704,ALT-'a' EMU/M-0-6/002/5 EMU/M-0-6-002/6 31210053 31930372 31930384 III III III ICF ICF ICF DRG.NO.T-0-4-631 COL.I ALT 'g' DRG.NO.WLRRM-0-4-002 COL.III. ALT 'A' 30047122 III ICF 3.33 3.33 3.33 3.33 SLEEVE COMPLETE FOR C.P.PIN CHANNEL (MACHINED FOR CBC COUPLER ON ICF COACHES TOITEM-1 =4NOS AND ITEM-2 = 4NOS. CENTER PIVOT PIN CENTER PIVOT PIN 3.35 1.STOP TO =2NOS, (2)BRACKET FOR EQUALISINGSTAY TO =2NOS (EXCEPT ITEM 5)(3) SIDE BEARER HOUSING TO =2NOS.SL.NOS. 1 TO 3 MAKES ONE SET AND TO BE SUPPLIED I EQUALISING STAY TO WITHOUT ITEMS 5 AND 6 (NYLON BUSH).FINISHED ITEMS SHALL BE PACKED IN WOODEN CRATES TO AVOID PAINT DAMAGE DURING TRANSIST AND MACHINED SURFACES TO BE RUST PROOF OIL COATED AND COVERED WITH BIO DEGRADABLE PLASTIC SHEETS. THE ITEM SHOULD BE COATED WITH TWO COATS OF HIGH PERFORMANCE ANTI CORROSIONS EPOXY COATING (TWO PACKS) GREEN FINISHING 3.35 TO BOGIE FRAME (WITHOUT NYLON BUSHES WHERE EVER 3.33 APPLICABLE) BOGIE FRAME COMPLETE (WITH 3.33 GUIDE) RDSO SPECN:M&C/PCN/123/2006.W DRG.NO.ICF/SK-0-5-132/COL.I ALT ITH AMENDMENT NO.1. 't' 30056860 RDSO SPECN.C-9202,REV02. RDSO SPECN.C-9202 REV.02. III ICF ICF/MRVC/D-0-3-001/COL.I ALT 'a' 31036119 III ICF DRG.NO.T-0-3-920, COL.I,ALT-'h' 30921594 III ICF