Wireless LAN Client Configuration Guide for PDA Wireless LAN Client Configuration Guide for PDA (Pocket PC) 1. Download the NYP Wireless LAN root certificate from http://www.nyp.edu.sg/cnc/wireless/rootca.cer. Save the certificate into the PDA. 2. Tap Start, Programs, File Explorer. Browse to the file, rootcer.cer, and tap on it. 3. Click Yes to install the certificate. 4. Verify the certificate is installed by tapping Start, Settings, System, Certificates, and Root. Scroll down and you’ll see an entry for NYPWLAN. Page 1 Wireless LAN Client Configuration Guide for PDA 5. Tap Start, Settings, Connections and Network Cards. 6. At Networks to access, select Only access points and click Add New … 7. Enter the Network name and select Work for Connects to as shown below. Page 2 Wireless LAN Client Configuration Guide for PDA The Network name to be used is as follows: User Group All Staffs EM Staffs SEGE students SSID STAFF BMS SEG SEGM, SCL(C) & SDN students SCL(LS) students SIT students SIDM students SBM students SHS students SEG SEG SITSDN SITSDN SBM SHS Note: SSID is case-sensitive. 8. In the Network Key tab, select Open for Authentication and WEP for Data Encryption. Page 3 Wireless LAN Client Configuration Guide for PDA 9. In the 802.1x tab, check Use IEEE 802.1x network access control and select PEAP for EAP type. 10. At the Network Log On screen, enter Username, Password, Domain and check Save password. Page 4 Wireless LAN Client Configuration Guide for PDA User name is the window domain login name, eg: Student: 01234a (Admission Number) Staff: staffid (Staff ID) Password is the password of the window domain login name. Login domain is as follows: User Group All staff EM Staff SEGE students SEGM, SCL(C) & SDN students SCL(LS) students SIT students SIDM students SBM students SHS students 11. Tap on the wireless icon Login Domain Leave blank Leave blank EICTSTUD GSISTUDENT SCL SIT NYPSDN SBMSTUD SHSLAB and select Wireless Network Status… Page 5 Wireless LAN Client Configuration Guide for PDA 12. Once connected, you will receive an IP Address of 172.26.x.x as shown. 13. In the AP Browser tab, you will see the Network name you have entered earlier on in the Preferred Profiles. 14. You are now successfully connected to NYP wireless LAN. Page 6